can you please help me with this

Explanation:

you should first find the proportionality constant or the spring constant(as we see it as a spring).the find the value of x so that the force is 3N

If [tex]\vec A[/tex] and [tex]\vec B[/tex] are perpendicular, then their dot product is zero. This means

[tex]\vec A \cdot \vec B = (\vec\imath + 5\,\vec\jmath + n\,\vec k) \cdot (2\,\vec\imath - \vec\jmath + \vec k) = 2 - 5 + n = 0[/tex]

Solving for n is trivial; it follows that n = 3.

Answer:

C

Explanation:

Chemical reaction,physical

Answer:

HERTZ=HZ

Explanation:

Answer:

look below! :)

Explanation:

Radiation transfers heat through electromagnetic waves

conduction transfers heat through direct contact of things

convection transfers heat through movement of air or water

The actual mass of a 1 cm² piece of copy paper is determined as 0.0074 g.

Area = Length x Width

Area = (11 x 2.54 cm) x (8.5 x 2.54 cm)

Area = 603.22 cm²

Mass = area density/area

Mass = (4.5 gcm²)/(603.22 cm²)

Mass = 0.0074 g

The complete question is below:

A sheet of 8.5 inch by 11inch paper has a mass of 4.50 grams one square centimeter , 1cm2 of that sheet of paper will have a mass closets to ____grams ( (hint use 1inch = 2.54 centimeters and area = length times)

Learn more about mass here: https://brainly.com/question/1762479

#SPJ1

The speed the golf must have initially to reach the hole is 31.32`1 m/s.

When an object is thrown at an angle from the horizontal direction, the object is said to be in projectile motion. The object which follows the projectile motion.

A golfer wishes to chip a shot into the hole 50m away on flat level ground. if the ball flies to a maximum height of 25m.

The angle with which the ball flies,

tan θ = 25 m/ (50m/2)

tan θ =1

θ  =45°

If u is the initial speed, the maximum height of the ball is

H = u² sin²θ / 2g

Put the values, we get

25 =  u² sin²45 / (2x9.81)

u = 31.321 m/s

Thus, the initial speed is 31.321 m/s

Learn more about projectile.

brainly.com/question/11422992

#SPJ1

All move at the same speed.

Explanation:

Electronic magnetic spectrum includes radio waves, micro waves, infra red, visible light, ultra violet, x-rays, gamma rays. These all electromagnetic waves travel at the same speed of light of about 300,000,000 m/s through vacuum. Though they have different wavelength, their speed is same.

Consider a person trying to push a large crate across a floor, as in the diagram. As they apply a force to push the crate along the floor in one direction, a frictional force is generated in the opposite direction.

[tex]study \: well.....[/tex]

The quickest technique to calculate the volume of a cube-shaped table is to use a ruler to measure one side, then multiply that figure by three. Option B is correct.

Assume the side length of the cube under consideration is L units. The volume of the cube is then equal to L³ cubic units.

The volume of a cube is;

V = L³

Ubes have equal-length sides. The quickest technique to calculate the volume of a cube-shaped table is to use a ruler to measure one side, then multiply that figure by three.

Hence option B is correct.

To learn more about the volume of a cube refer

https://brainly.com/question/26136041

#SPJ1

The statements that describe a benefit of the scientific method are as follows:

Thus, the correct options are B, C, and D.

The scientific method may be defined as a strategy of research in which a problem is recognized, relevant data is collected, a conjecture is composed of this data, and the assumption is empirically tested to determine the outcome of particular research.

The scientific method never explains or provides an answer to any question immediately because it consists of a scripted format with certain parameters.

The scientific method uses the identical vocabulary for sharing information with one another in particular terminology.

Therefore, it is well described above.

To learn more about the Scientific method, refer to the link:

https://brainly.com/question/17216882

#SPJ1

Both the butterfly and the large car will have equal forces but in opposite direction.

Newton's third law of motion states that action and reaction are equal and opposite. That is, the force exerted on an object is equal to the reaction experienced by the object.

Fa = - Fb

where;

Thus, both the butterfly and the large car will have equal forces but in opposite direction.

Learn more about Newton's third law of motion here: https://brainly.com/question/25998091

#SPJ1

From the calculation, the value of the acceleration is 5.8 m/s^2.

The term uniform acceleration refers to a situation in which the velocity increases by equal amounts in equal time intervals.

Given the fact that the car started from rest and reached a velocity of  780.34 mph or 348.84 m/s in 1 minute of 60 seconds;

v = u + at

a = v/t

a = 348.84 m/s/ 60 seconds

a = 5.8 m/s^2

Learn more about acceleration:https://brainly.com/question/12550364?

#SPJ1

Answer: I believe his brother, Mike, who is 6'2, will have the longer shadow.

The a barrier to the correct interpretation of what you hear can occur due to different frame of reference.

A frame of reference is a particular set of beliefs or ideas on which you base your judgment of things.

A barrier in the correct interpretation of information can occur when two observers are in different frames of reference.

Thus, the a barrier to the correct interpretation of what you hear can occur due to different frame of reference.

The complete question is below:

Which is a barrier to the correct interpretation of what you​ hear?

-Different frame of reference

-Dissimilar vocabulary

-Differing accent

-Jargon usage

-Poor explanation

Learn more about frame of reference here: https://brainly.com/question/1707361

#SPJ11

Answer:

[tex]\huge\boxed{50g}[/tex]

Definition:

Half-life- The time taken for half of the radioactive isotopes to decay.

Explanation:

How does radioactive decay work? Radioactive decay is a process by which unstable nuclei become more stable through the emission of alpha or beta particles or gamma rays.

Since a half-life is the time taken for half of the isotopes to decay, we can simply divide the initial mass of 100 grams by 2; this gives us 50 grams.

1) Divide 100g by 2.

[tex]\frac{100g}{2}=50g[/tex]

Answer:

b

Explanation:

An insulator does not transfer thermal or electrical energy but a conductor does

Answer:

the unit of velocity is meter per second

Answer:

No unit

Explanation:

If this question is asking what the unit of velocity to velocity is i.e. v/v then there is no unit because the units are canceled.

Answer:

The ability of a substance to dissolve into another, called the solvent.

Explanation:

That is why water is called "the universal solvent."

Because it can dissolve almost anything.

The speed and temperature have nothing to do with solubility.

Answer:

the ability of one substance to dissolve in another

Explanation:

The total amount of charge and energy will be 1.20 C and 7.20 J respectively

A capacitor is a device that can store electrical energy. It is a two-conductor configuration separated by an insulating medium that carries charges of equal size and opposite sign.

An electric insulator or vacuum, such as glass, paper, air, or a semiconductor termed a dielectric, can be used as the non-conductive zone.

Given data;

Voltage,V= 12V

Capicitance,C=100mF = 100 × 10⁻³ F

The total amount of charge is;

Q=CV

Q=100 × 10⁻³ ×  12 V

Q=1.20 C

The energy stored by the capacitor;

[tex]\rm U = \frac{1}{2}CV^2 \\\\ \rm U = \frac{1}{2}\times 100 \times 10^{-3} \times (12 \ V)^2 \\\\ U= 7.20 \ J[/tex]

The energy stored by a capacitor will be 7.20 J.

Hence, the total amount of charge and energy will be 1.20 C and 7.20 J respectively

To learn more about the capacitor, refer to the link: https://brainly.com/question/14048432

#SPJ1

The resistance of the unknown resistor is determined as 0.39 ohms.

The total resistance of the circuit is calculated as follows;

V = IR

R = V/I

R = (3.5)/10

R = 0.35 ohms

The resistors are in parallel arrangement

1/R = 1/R₁ + 1/R₂ + 1/R₃

1/0.35 = 1/5 + 1/10 + 1/R₃

100/35 = 3/10 +  1/R₃

20/7 = 3/10 +  1/R₃

1/R₃ = 20/7 - 3/10

1/R₃ = (200 - 21)/70

1/R₃ = 179/70

R₃ = 70/179

R₃ = 0.39 ohms

Learn more about parallel resistors here: https://brainly.com/question/24155667

#SPJ1

Answer:

32400 J

Explanation:

K.E.=(1/2)(200)(18^2)

The power exerted by the cyclist is determined as 50 W.

The power exerted by the cyclist is calculated as follows;

P = FV

where;

P = 20 x 2.5

P = 50 W

Thus, the power exerted by the cyclist is determined as 50 W.

Learn more about power here: https://brainly.com/question/25263760

#SPJ1

if a volume of air is warmed it expands due to increased translational kinetic energy as it expands it will start to cool.

We can then conclude that at constant pressure, temperature and volume are directly proportional: temperature increases, volume increases; decrease temperature, decrease volume.

In this case, the higher the temperature, the greater the kinetic energy that acts on the molecules of this gas, so when the gas expands, these molecules find more space and collide less, which will cause the gas to cool.

See more about volume at brainly.com/question/1578538

#SPJ12

Answer:

The car will stop after 4 seconds after moving the distance of 0.08km.

Explanation:

The reading above it clearly states that a car is moving at a speed of 72Km/hr. And it asking for the distance the car move when it stops after 4 seconds.

Looking at speed formula , speed=distance÷time.

But in this problem we I finding distance, so in speed formula make distance the subject.

Before going ahead you should have this in mind the unit for distance is Km and m . Our speed is in Km/hr but our time is in second. In this case change 4 seconds to hour which is 0.00111 hr .you change second to hour because hr will cancel hr when solving for distance giving distance unit Km

Distance = speed × time

Distance= 72km/hr × 0.00111 hr

hour cancel hour

Distance= 72km × 0.00111

Distance = 0.08km

Therefore the car will stop after 4 seconds after moving the distance of 0.08km.

Please mark brainliest.

conversion :

72 km/h = 72 × (1000/3600) = 20 m/s

so, in 4 seconds it travel

Answer:

The value of index of refraction(n₂) is 1.26

Explanation:

look at the attachment above

The range of diameters and luminosities displayed by elliptical galaxies is 3000 to 700,000 light years and Mv-23 down to Mv- -16 mag respectively

Elliptical galaxies are type of galaxies with a smooth ellipsoidal shape.

They are the most abundant galaxies in the universe.

Their diameter ranges from 3, 000 to 700, 000 light years.

Their luminosity ranges from Mv-23 down to Mv- -16 mag

Therefore, the range of diameters and luminosities displayed by elliptical galaxies is 3000 to 700,000 light years and Mv-23 down to Mv- -16 mag respectively.

Learn more about elliptical galaxies here:

https://brainly.com/question/24985948

#SPJ11

The efficiency of the kettle is 117.9%

Efficiency is used to measuring how much work or energy we can conserve in a process. In other words, it is like comparing the output of the energy to the input of the energy in any given system.

It is also define as the ratio of  Energy Input to the Energy Output. To express it in percent multiply it by 100.

Here, Efficiency = Energy output / Energy input

          [tex]η =\frac{W_{out} }{W_{in} } * 100[/tex]

[tex]η = \frac{198kJ}{168kJ} * 100[/tex]  

=  117.9%

So , the efficiency is 117.9%

For more Efficiency related question visit:

https://brainly.com/question/13110830

#SPJ1

Answer:

20.37m/s

Explanation:

For this problem, we'll need a basic kinematic equation for both directions

Vertical direction:

[tex]y(t)=\frac{1}{2}a_{y}t^{2}+v_{o_y}t+y_{o}[/tex]

Knowing that the acceleration in the y-direction is due to gravity, and is constant near the surface of the Earth, where the rock is being thrown, we get [tex]a_{y}=g=-10m/s^{2}[/tex].  We're also given that the initial vertical height is 83m, so [tex]y_o=83m[/tex].  Additionally, we're given that the stone is thrown horizontally, and thus initially, it has no vertical velocity.  Only velocity in the x-direction.  Thus, [tex]v_{o_y}=0m/s[/tex].  Substituting known values into our equation:

[tex]y(t)=\frac{1}{2}(-10)t^{2}+(0)t+(83)[/tex]

[tex]y(t)=-5t^{2}+83[/tex]

This equation is true for all times until the acceleration changes (isn't constant... i.e. when it hits the ground).

What now?

We want to find the specific time when it does hit the ground.  Why?  Because this is the point in time where we know some extra information about what is happening in the x direction, and that will help us deal with the x-direction equation.  

When the stone does hit the ground, the output of this function (measuring the height of the stone) is zero, which leaves only one unknown value, t... the time associated with that y:  the time that it takes to hit the ground:

[tex]0=-5(t_{ground})^{2}+83\\-83=-5(t_{ground})^{2}\\\frac{-83}{-5}=(t_{ground})^{2}\\16.6=(t_{ground})^{2}\\\sqrt{16.6}=\sqrt{(t_{ground})^2}\\4.074309757seconds=t_{ground}[/tex]

Again, this is the time that the stone hits the ground.  Knowing how special this time is, one might give it a special subscript to keep track of it.  

[tex]t_{ground}=4.074309757seconds[/tex]

Horizontal direction

Reusing the basic kinematic equation for the horizontal direction:

[tex]x(t)=\frac{1}{2}a_{x}t^{2}+v_{o_x}t+x_{o}[/tex]

Note that in the horizontal direction, there is no acceleration (after the rock is released), so [tex]a_{x}=0[/tex].  Also, if we define the base of the cliff as our origin, then at the top of the cliff where the rock is released, the initial x-position is still zero, aka, [tex]x_{o}=0[/tex]

[tex]x(t)=\frac{1}{2}(0)t^{2}+v_{o_x}t+(0)\\x(t)=v_{o_x}t[/tex]

While we don't know the initial horizontal velocity, we do know an output of the function for one specific input... we know that when the stone hits the ground, that the stone's horizontal distance is 93m from the cliff.  So, if we input [tex]t_{ground}[/tex] into this function, it will give an output of 93.  The only remaining unknown is the initial velocity in the x direction.  One equation, one unknown, we can solve this:

[tex]x(t_{ground})=v_{o_x}t_{ground}\\83=v_{o_x}(4.074309757)\\\frac{83}{4.074309757} =v_{o_x}\\20.37154879m/s =v_{o_x}\\[/tex]

If there were a component of initial velocity in the y direction, we would need to use the Pythagorean theorem to combine them.  However, as the initial y component of velocity is zero, the initial velocity is simply the initial x velocity.

Paying attention to directions, round to the answer to the nearest hundredth:

[tex]20.37m/s =v_{o}\\[/tex]