Can you please help solving the attached question on isotopes especially part e and f?

Answer:

i believe it should be b, 11,000 seconds

Explanation:

Answer:

D: 13,200

Explanation:

This are my answers to your quesion

When working in laboratories and hospitals, it’s crucial that any contaminants found in water are removed immediately, before they cause any damage.

Each impurity carries its own risks to chemical and biological research, not to mention the detrimental effect they cause to the quality of pure water. Here we discuss the 8 main types of water contaminants, and how they can be prevented.

1. Microorganisms

Bacteria, algae and fungi all regularly interfere with sterile research applications. Bacteria can adversely influence cell and tissue culture by competing at enzyme-active sites on substrates.

If free-floating bacteria form biofilms on surfaces, they can be extremely difficult to remove. These biofilms can grow for several years, spontaneously releasing bursts of bacteria, along with their associated endotoxins and nucleases.

These nucleases then break down DNA and RNA in samples, and the endotoxins will have a negative effect on the growth and function of cells.

2. Viruses

Viruses – referred to as non-living nucleic acids – adversely affect tissue and cell growth. They’re extremely small, with most of them falling between 0.01 – 0.3 microns, and they can survive for long periods of time. Once they’ve been spotted in water, they should be removed as soon as possible.

3. Pyrogens

For mammalian cell cultures, and the preparation of solutions or devices that will later have contact with humans and other mammals, it’s crucial that the water used is pyrogen-free.

The most significant component of pyrogens – a form of endotoxin – is lipopolysaccharides (LPS), which is derived from Gram-negative bacteria walls. If LPS gets into the blood or spinal fluid, it can be toxic and cause a fever.

4. Dissolved Inorganic Ions

Silicates, chlorides, calcium, fluorides, magnesium, phosphates, bicarbonates, sulphates, nitrates and ferrous compounds are all forms of dissolved inorganic ions.

The instability in water caused by these ions will negatively influence chemical and biological reactions. Results include the formation of protein-protein and protein-lipid interaction, altering enzymatic activity, and delaying the growth of cells and tissue.

5. Dissolved Organic Compounds

These are derived from animal and plant decay, in addition to any human activities that involve the introduction of alcohol, protein, pesticides, chloramine, herbicides or detergents into the environment.

Dissolved organic compounds interfere with high performance liquid chromatography (HPLC), gas chromatography and fluoroscopy.

6. Dissolved Gases

Water contains naturally dissolved carbon dioxide, nitrogen and oxygen, but these gases can alter the pH of lab water, which upsets the ionic balance. Concentrations of oxygen and nitrogen can affect the rate of biochemical reactions; and high concentration of dissolved gases can cause a bubble formation, which obstructs the flow through chromatography columns and micro-channels.

Dissolved carbon dioxide raises water acidity, reducing the capacity of ion exchange resins in DI systems.

7. Suspended Particles

When large suspended particles of clay, sand, silt or vegetation between 1 – 10µm are found in water, they cause turbidity and settle at the bottom.

Suspended particles can foul reverse osmosis membranes, filters and chromatography columns, especially if the system stems from a reservoir or tank within the building.

8. Colloidal Particles

Colloidal particles are much smaller than suspended particles, at just 0.01 – 1.0µm, and they don’t settle.

Colloidal particles regularly interfere with analytical techniques, and bypass ion exchange resins, which result in lower resistivity in DI water.

How to Prevent Contaminants

The main way to prevent and remove contaminants are through water purification systems. Different technologies have been created, each specialising in the removal of specific contaminants.

For example, whilst the process of distillation won’t remove ionised gases, inorganic ions or dissolved non-ionised gases, they will filter out bacteria and pyrogens.

Reverse osmosis (RO) is hailed as one of the most effective ways of removing contaminants, as this process removes up to 99% of impurities in water. Dissolved organics and ionics, suspended impurities, bacteria and pyrogens are all removed from water when RO is used.

To conclude, contaminants can be very damaging to water. Once found, they should be removed as soon as possible, using the most effective form of water purification technology.

Answer:

(c)

Explanation:

in both black and red

Answer:

I think 3 im am not sure

Explanation:

Answer:

The reason carbon-13 is more abundant than carbon-14 despite them both being  isotopes is because carbon-13 is stable and doesn't decay into other elements, unlike carbon 14.

Explanation:

Carbon isotopes come in three forms. By far the most common isotope of carbon is carbon-12 (12C), which contains six neutrons in addition to its six protons. The next heaviest carbon isotope, carbon-13 (13C), has seven neutrons. Both 12C and 13C are called stable isotopes since they do not decay into other forms or elements over time. The rare carbon-14 (14C) isotope contains eight neutrons in its nucleus. Unlike 12C and 13C, this isotope is unstable, or radioactive. Over time, a 14C atom will decay into a stable product.

Answer:

16603.6

or

1.66036 x 10^4

Hope this helps! ^_^

Answer:

16,603.6

Explanation:

(4.5 x 10 - 14) x (5.2 x 103)

(45 -14) x 535.6

31 x 535.6

16,603.6

Explanation:

For an effective use of a laboratory with protection and safety for all, there must be rules and policies that must be strictly disseminated and followed by anyone who uses a laboratory for a specific purpose, such as the use of specific clothes and goggles.

However, in the event of a small fire, the ideal is to notify the laboratory instructor, and exit the emergency exits in an orderly and quick manner.

If some materials ignite and cause a small fire you should c. pour water on it or use wet paper towels to put it out.

In the lab there are many guidelines and precautions that must be taken to ensure that things like fire do not happen but sometimes it cannot be helped.

If some materials like paper or paper-like materials ignite and cause a small fire you should put it out quickly by:

In conclusion, put the fire out as soon as possible using water or a small paper towel so that it doesn't spread.

Find out more at https://brainly.com/question/3409761.

Options for this question include:

a. sound the building alarm and evacuate the area  

b. sound the building alarm and then use the fire extinguisher

c. pour water on it or use wet paper towels to put it out

d. run out of the room

Answer:368.875 cg

Explanation:

0.13oz (1lb/16oz) (454g/1lb)(100cg/1g)= 368.875 cg

Answer:

true....................

Answer:

16 feet is 5.3 repeating yards

Explanation:

Answer: a. 1,200 mL

Explanation:

20 x 12 x 5 = 1,200

(L x W x H)

Answer:

The percent error of the thermometer is 3%

Please give me the brainliest if you find this helpful

The boiling point of water is 100°C. During an experiment, water came to a boil at 97°C. The percent error of the thermometer is -3 %

Percent error is the error of the percentage of the calculation. It is calculated by subtracting the actual value from the expected value and dividing it by the expected value. So the formula will be:

The actual value is the value that is cone by doing the experiment. The calculation that is come in the experiment.

The expected value is the pre-estimated values that are estimated before the experiment.

Percent error = actual value - expected value / expected value x 100

The actual value = 97°C

The expected value = 100°C.

Putting value in the formula

97 - 100 / 100 x 100 = -3

Thus, the percent error of the thermometer is -3 %

To learn more about percent error, refer to the link:

https://brainly.com/question/3670306

#SPJ2

Answer:

first you could say did you know that you 3% of sodium in sprit but the good thing is that sodium wont make you gain any pounds if it weren't for sodium all are food wouldn't be preserved we would be eating unpreserved food witch could really hurt your body.

Explanation:

hope it  helps

Answer:

mutualism describes the ecological interaction between two or more species where species has a net benefit. 2. The doctrine that mutual dependence is necessary to social well-being

Explanation:

google

Answer: when you burn something every action has a reaction. so if you put wood in the fire the wood would burn up into this coal like block once completely burnt through. after there is no more wood left to burn the fire would slowly die and there would just be the remains of the wooden block.

Answer:

8.801×10^-18 moles Ca

Explanation:

5.3 X 10^6atoms* (1mol/6.022*10^23) = 8.801×10^-18 moles Ca

Answer and Explanation:

Solids:

We can name some chemical elements that in nature are solids at room temperature:

Aluminium (Al): it is a dultile metal with a color between silver and white.

Sulfur (S₈): it is a pale yellow solid.

Zinc (Zn): it is a metallic brittle solid.

Liquids:

Some substances that are liquids at room temperature are:

Water (H₂O): it is a subtance composed by 2 atoms of hydrogen and 1 atom of oxygen. It is a clear, limpid, odorless liquid.

Bromine (Br₂): it is a homogenoeus halogen which is liquid at room temperature. It has a color beteween red and brown.

Mercury (Hg): this heavy metal is liquid at room temperature.

Gases:

Hydrogen (H₂): it is a colorless, odorless and hightly inflammable gas.

Oxygen (O₂): a diatomic gas, without odor neither color, with an important role in biological proceesses.

Nitrogen (N₂): other diatomic gas, which is inert (it does not react easily).

A substance may exist as solid, liquid or gas at room temperature.

There are three states of matter;

The particular state of matter in which a substance exists at room temperature depends on the magnitude of intermolecular interaction between the molecules of the substance.

The following are gases at room temperature;

The following are liquids at room temperature;

The following are solids at room temperature;

Learn more: https://brainly.com/question/12108425

Answer:

Explanation:

ROYGBIV

Red=>Orange=>Yellow=>Green=>Blue=>Indigo=>Violet rays

Answer:

number of individuals

Explanation:

calculated by dividing the number of people by area

Answer:

It indicates the ammount of individuals per unit square area

Explanation:

If you have 500 people in a 500 squared miles the population density would be 1 person every one squared mile.

Answer:

Natural abundance of X is 75.18amu.

Explanation:

The atomic mass of an element is defined as the mass of its isotopes times its natural abundance.

In the unknown element X, the atomic mass of the isotope ⁷⁵X is 75 amu and of ⁷⁷X is 77 amu.

That means the natural abundance of X is:

75amu*91.0% + 77amu*9.00%

Answer: it's a

Explanation:

Answer:

1.33 moles

Explanation:

Answer:

8.00 x 10^23 / 6.02 x 10^23

Explanation:

sorry dont have my calculator but if you put it in you will get the answer

Answer:

2 mL.

Explanation:

From the question given above, the following data were obtained:

Volume of water = 8 mL

Volume of water + Aluminium = 10 mL

Volume of Aluminium =?

The volume of aluminium can be obtained by calculating the difference between the volume of the water + aluminium and the volume of water. This is illustrated below:

Volume of aluminium = (Volume of water + Aluminium) – (volume of water)

Volume of water = 8 mL

Volume of water + Aluminium = 10 mL

Volume of Aluminium = 10 – 8

Volume of Aluminium = 2 mL

Therefore, the volume of aluminium is 2 mL.

Answer:

physical change

Explanation:

the cutting doesnt change the chemical structure of the sodium

what are the answers

Explanation:

got this and dont know what it is

The correct answer is- The black balls represent carbon atoms.

Molecular models are three dimensional representations of a a molecule that enables us to visualize the molecule.

Molecules are represented by three dimensional models. These models help us to really have a firm grasp of what the molecule should look like.

In this particular question, we are told that ethanol has two carbon atoms, six hydrogen atoms, and one oxygen atom.

Also, we have; one red ball two black balls six white balls eight sticks What do the black balls in the model.

This implies that the two black balls must represent carbon atoms from the information provided.

https://brainly.com/question/1389682

Answer:

Option A. 36.036 g

Explanation:

From the question given above, the following data were obtained:

Percentage of oxygen in water = 88.8%

Mass of oxygen = 32 g

Mass of water =..?

Mass of water that contains 32 g of oxygen can be obtained as follow:

Percentage of oxygen = mass oxygen /mass of water × 100

88.8% = 32/mass of water

88.8 /100 = 32/mass of water

Cross multiply

88.8 × mass of water = 100 × 32

88.8 × mass of water = 3200

Divide both side by 88.8

Mass of water = 3200/88.8

Mass of water = 36.036 g

Therefore, the mass of the water that contains 32 g of oxygen is 36.036 g

Answer:

The answer is increasing the distance between two objects decreases the gravitational force. which is C

Explanation:

Answer: Well, at birth, there are approximately 1 million eggs. And at the time of puberty, only 300,000 remain.

Explanation:

Answer:

only one egg will be produced by a single ovary in a month. the ovaries function in an alternate manner., ie., one ovary will release an egg in one month and the other ovary will release the ovum next month.

Answer:

2

Explanation: