Answer:
la primera va con la última
What would be the freezing point of a solution that has a molality of 1.506 m which was prepared by dissolving biphenyl (C12H10) into naphthalene
The freezing point of a solution prepared by dissolving biphenyl (C12H10) into naphthalene is 67.99oC.
Freezing point can be obtained from;
ΔT = K m i
ΔT = freezing point depression
m = molality of the solution = 1.506 m
i = Van't Hoff factor = 1 for molecular substances
K = Freezing constant of naphthalene = 8.15 oC/m
ΔT = 8.15 oC/m × 1.506 m × 1 = 12.27oC
Freezing point of pure naphthalene = 80.26 °C
ΔT = Freezing point of pure naphthalene - Freezing point of solution
Freezing point of solution = Freezing point of pure naphthalene - ΔT
Freezing point of solution = 80.26 °C - 12.27oC = 67.99oC
Learn more:
During a class presentation, your classmate explains that plants perform photosynthesis and animals perform cellular respiration. In your own words, describe what these processes are and explain why your classmate’s statement is correct or incorrect.
My classmate's statement in incorrect because plants are also composed of cells.
All living things are composed of cells. A cell is the smallest unit of living organisms. Cells obtain energy via the process of cellular respiration. During cellular respiration, glucose is broken down to yield carbon dioxide and water.
In photosynthesis, carbon dioxide and water are combined to form glucose. The two processes are opposites of each other. Plants produce their own food via photosynthesis. Since plants are composed of cells, plant cells also undergo cellular respiration therefore my classmate's statement in incorrect.
Learn more: https://brainly.com/question/11324711
How many grams of sodium acetate NaCH3COO, , must be dissolved to prepare 200. mL of a 0.216 M aqueous solution of the salt? g
Answer:
Explanation:
You have to find the mass in the mole before the molarity and then in the mole.
Which of the following describes how air resistance affects the motion of a falling object?
Air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.
Air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.
Air resistance may change the direction of a falling object but does not affect its speed.
Air resistance may change the direction of a falling object but does not affect its speed.
Air resistance works with gravity to pull a falling object towards the Earth.
Air resistance works with gravity to pull a falling object towards the Earth.
Air resistance opposes the force of gravity and causes an object to reach terminal velocity.
Air resistance opposes the force of gravity and causes an object to reach terminal velocity.
Air resistance opposes the gravity in a falling object hence the object loses speed once it reaches terminal velocity.
According to the experiment of Galileo, in the absence of air resistance, all objects that are thrown down from the same height will hit the ground at he same time due to the effect of gravity.
We know that the air resistance makes the acceleration of object to become less than the acceleration due to gravity. So, air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.
Learn more: https://brainly.com/question/865531
Answer:
The answer is D - Air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.
Ill explain why -, for example ,
When the paper is smooth, it exposes a large surface to the air beneath it which slows its descent. Once it is crumpled, the surface which comes in contact with the air is much smaller, allowing it to fall much faster. At first, you probably thought the book would touch the ground first since it is heavier However, once the piece of paper was crumpled, they hit the ground at the same time! Funny, since it is the same piece of paper and the book is still heavier. It all comes down to form. I hope this helped u with the test !!
To what pH should you adjust a standard hydrogen electrode to get an electrode potential of -0.128 V ? (Assume that the partial pressure of hydrogen gas remains at 1 atm.) Express your answer using two decimal places.\
The pH of the standard hydrogen electrode that has electrode potential of -0.128 V is 4.3.
The equation of the hydrogen electrode is;
2H^+(aq) + 2e ⇄ H2(g)
The standard electrode potential of hydrogen is 0.00 V
Using the Nernst equation;
Ecell = E°cell - 0.0592/n log Q
Now;
E°cell = 0.00 V
n = 2
Q = 1/[H^+]
-0.128 = 0.00 - 0.0592/2 log 1/[H^+]
-0.128 = 0.00 - 0.0296 log 1/[H^+]
-0.128 = - 0.0296 log 1/[H^+]
-0.128/ - 0.0296 = log 1/[H^+]
1/[H^+] = Antilog (4.32)
[H^+] = 4.79 × 10^-5
Now;
pH = -log[H^+]
pH = -log (4.79 × 10^-5)
pH = 4.3
Learn more: https://brainly.com/question/11155928
HELP I WILL MARK BRAINLIST
I HAVE 10 MINUTES
Which phrase correctly describes the effect of pressure on the solubility of a gas in a liquid?
1) proportional to the square root of the pressure of the gas above the liquid
2) directly proportional to the pressure of the gas above the liquid
3) inversely proportional to the pressure of the gas above the liquid
4) unrelated to the pressure of the gas above the liquid
Answer:
Answer is 2
Explanation:
directly pro
Which of the following is NOT a property of gases?
Which of the following is NOT a property of gases?
a. Constant shape
b. Fill their container
c. Have mass
d. Easily compressed
Answer:
a. Constant shape
PLS HELP ILL GIVE BRAINLIEST
Upload images that have physical and chemical properties
(six physical properties and 2 chemical properties)
Answer:
Explanation:
I hope this helps
What is the formula for sodium phosphate
Answer:
Explanation:
It''s chemical formula is Na3PO4
formula of sodium bicarbonate
Answer:
NaHCO3
Explanation:
The three is small at the bottom at the end
5. What is the systemic name for the following structure?
Answer:
You are not showing the question, but I believe the answer is cis-3,4-dimethyl-3-hexene.
Explanation:
since the substituents are on same side, it call cis. Followed by the name.
Dont need work pls help
hormones that are essential for normal body growth and maturation include all the following except?
a. thyroid hormone
b. growth hormone
c. Ghrelin
d. insulin
A 1.__________ is a choice among possible alternative actions. Like planning decision-making is a challenge and requires careful consideration for both types of decision namely 2.____________________________ and 3.______________________. For effective planning in today’s dynamic environments. Different techniques and tools must be used, such as 4._________________, 5.______________________________, 6.______________________________, 7.________________________, 8.__________________. All planning types, without exception, make use of forecasting. Business periodicals publish forecasts such as employment and unemployment rates, increase or decrease of interest rates, stock market data, GNP/GDP data and others. Forecasts used may either be 9._________________, or 10.__________________. Risk or 11._________________________ compel the decision maker to do estimates regarding the possible occurrence of certain outcomes that may affect his or her chosen solution to a problem. All managers and workers/employees in organizations make decision or make choices that affect their jobs and organization they work for, they make decision by going through the 12.__________________________ of the decision-making process suggested by Robbins and Coulter (2009). 13._________________ is a process which begins with problem identification and ends with the evaluation of implemented solutions. 14.________________________ It is change in an attribute, condition, factor, parameter or value that represents crossing a threshold and actuates or initiates a mechanism or reaction that may lead to a radically different state of affairs. 15.________________________ Ideal conditions in deciding problems; these are situations in which a manager can make precise decisions because the results of all alternatives are known.
plzz help me
Answer:1. Decission
2.Structured or programmed decision
3.Unstructured or non -programmed decisions
4.Forecasting
5.Contingency planning
6.Scenario planning
7.Bench marking
8.Participatory planning
9.quantitative
10.qualitative
11.Uncertainty conditions
12.eigt steps
13. Decision making
14.Trigger point
15.Certainty conditions
Explanation:
It's all about organization and management.
Explanation:
I hope it helps
An atom from the column 1 can form an iconic compound with another from column 18
True
Or
False
A balloon is partially inflated with 6.00 L of hydrogen at sea level, where the atmospheric pressure is 1.00 atm. The balloon ascends to an altitude of 1500 m, where the pressure is 0.80 atm. What is the volume of the balloon at the higher altitude if the temperature of the hydrogen doesn’t change during the ascend?
Considering the Boyle's law, the volume of the balloon at the higher altitude is 7.5 L.
The gas laws are a set of chemical and physical laws that allow determining the behavior of gases in a closed system. The parameters evaluated in these laws are pressure, volume, temperature and moles.
Boyle's law is one of the gas laws that states that the pressure of a gas in a closed container is inversely proportional to the volume of the container, when the temperature is constant. In other words, if the pressure increases, the volume decreases; while if the pressure decreases, the volume increases.
Boyle's law is expressed mathematically as:
P× V = k
In this law then two variables are related: pressure and volume, so it is assumed that the temperature of the gas and the number of molecules of the gas are constant.
Studying an initial state 1 and a final state 2 is fulfilled:
P1× V1= P2× V2
In this case, you know:
P1= 1 atmV1= 6 LP2= 0.80 atmV2= ?Replacing:
1 atm× 6 L= 0.80 atm× V2
Solving:
[tex]V2=\frac{1 atm x 6 L}{0.80 atm}[/tex]
V2= 7.5 L
Finally, the volume of the balloon at the higher altitude is 7.5 L.
Learn more:
https://brainly.com/question/4147359?referrer=searchResultsWhich two substances are reactants in the chemical reactions of cellular respiration?
Answer:
The answer is A and C.
Explanation:
The reactants in the process of cellular respiration are oxygen and glucose, respectively. It is ATP that serves as the primary product of cellular respiration, with carbon dioxide and water serving as waste products.
Sugar is a glucose.
Oxygen and glucose are the two substances that are reactants in the chemical reactions of cellular respiration. Therefore, the correct options are options A, C.
What is cellular respiration?Through the process of cellular respiration, organisms mix oxygen with food molecules, directing the chemical energy contained in these substances towards life-sustaining processes while excreting carbon dioxide and water as waste. Foods are broken down by microorganisms that do not require oxygen in a process known as fermentation.
Adenosine triphosphate (ATP), an energy-rich compound that absorbs the chemical energy generated by the decomposition of food molecules then releases it to power other cellular functions, is one goal of the breakdown of foodstuffs. ATP is created when the energy found inside chemical bonds is converted from one form to another. Oxygen and glucose are the two substances that are reactants in the chemical reactions of cellular respiration.
Therefore, the correct options are options A, C.
To know more about cellular respiration, here:
https://brainly.com/question/29760658
#SPJ2
Is there more than one possible model that could be inferred from Rutherford’s data?
Rutherford proposed the nuclear model of atom. The only one model which can be inferred from this model is nucleus with protons and revolving electrons around.
What is Rutherford model?Rutherford proposed some aspects of atomic structure based on his gold foil experiment. He discovered that the alpha ray is scattering from foil by the repulsion it experienced from the metal.
This results lead to the discovery of positively charged particles in atom latter called as protons. Rutherford proposed that theses protons are located inside the nucleus and the electrons are revolving around the nucleus.
Latter Niels Bohr his student interpreted the nuclear model of Rutherford with quantum mechanics and theory of max planck and he proposed the equations for the determination of energy and momentum of electrons and the radius of atom.
Therefore, no other inferences except the presence of protons and revolving electrons can be obtained from Rutherford's model of atom.
To find more about nuclear model, refer the link below:
https://brainly.com/question/18521318
#SPJ2
A 0.48-mole sample of helium gas occupies a volume of 11.7 L . What is the volume of 0.72 mol of helium gas under the same conditions
AnswerExplanation:I finsished d
Answer:
17.55L
Explanation:
0.48mol : 11.7
0.72mol : x
0.48x = 8.424
x = 17.55
2. What pressure is required to compress 196.0 L of air at 1.00 atmosphere into a cylinder
whose volume is 26 0 L? (2 points)
Answer:
7.54 atmExplanation:
The required pressure can be found by using the formula for Boyle's law which is
[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]
where
P1 is the initial pressure
P2 is the final pressure
V1 is the initial volume
V2 is the final volume
From the question we have
[tex]P_2 = \frac{1 \times 196}{26} = \frac{196}{26} \\ = 7.538461...[/tex]
We have the final answer as
7.54 atmHope this helps you
Which of the following does not change the rate of collisions between particles in a reaction?
A. Addition of catalyst
B. increase in surface area
C. increase in temperature
D. decrease in the reaction volume
Answer: C
Explanation: trust me bro
Increase in temperature does not change the rate of collisions between particles in a reaction.
What is Collision?The collision hypothesis offers suggestions for how to alter the rate of a reaction as well as an explanation for why certain reactions occur at various rates.
According to the collision theory, for a chemical reaction to take place, the reacting particles must come into contact with one another. The frequency of collisions affects the reaction's rate. According to the idea, responding particles frequently encounter without reacting.
Any analysis of an ordinary reaction mechanism must start with this rule. It explains why there are so few termolecular reactions. According to the kinetic theory of gases, there will only be one instance in which three molecules collide at once out of every 1000 binary collisions.
Therefore, Increase in temperature does not change the rate of collisions between particles in a reaction.
To learn more about Temperature, refer to the link:
https://brainly.com/question/20162899
#SPJ2
Explain why there might be a change in the density of a forged product as compared to that of the cast blank.
Answer:
Forged parts are often tougher than cast parts. This can be determined by performing tensile tests on various areas on the parts. Additionally, the microstructures of forged and cast parts can be used to determine if a part was forged or cast. The microstructure of a cast part will have a more uniform grain structure.
Explanation:
2. Cells are the_____________ life units on this plane
Answer:
Cell are the smallest life units on this planet
Explanation:
Sodium hydroxide neutralises hydrochloric acid as shown in the equation:
NaOH(aq) + HCl(aq) i NaCl(aq) + H2O(l)
(4)
dm3
(3)
The student found that 27.20 cm3 of 0.100 moles per dm3 sodium hydroxide neutralised 5.00 cm3 of hydrochloric acid.
Calculate the concentration of the hydrochloric acid in moles per dm3.
Give your answer to three significant figures.
Explanation:
Mole ratio of NaOH : HCl = 1: 1
Moles of NaOH used = 0.1 mol/1000 cm3 × 27.20 cm3
= 2.72 × 10^-3 mol
Therefore moles of HCl used is also 2.72 × 10^-3 mol
So concentration of HCl can be found by dividing the no.of moles of HCl by the volume of HCl as follows
2.72 × 10^-3 mol/ 5cm3
1000cm3 = 1dm3
Therefore,
1cm3 = 1/1000 dm3
5cm3 = 5/1000 dm3
HCl conc. = 2.72 × 10^-3 mol/ 5×10^-3 dm3
= 0.544 moldm-3
Use the diagram below to answer 3 questions
Answer:
The element X is sulfur.
Sulfur will gain 2 electrons to become an ion.
The charge of sulfide ion is (2-).
Explanation:
An object's mass is less on
the Moon than it is on Earth.
Answer:
The mass of objects remains constant throughout the universe. This is because an object is made of he same amount of matter (atoms), no matter where you take it in the universe. If you take an object from the Earth to the moon, only the weight will change.
Explanation:
What are the dependent and independent variables in this experiment? How are outside factors being controlled in this experiment to make sure that the results test only the dependent variable?
Answer:
1. An independent variable is manipulated, or changed. The dependent, or responding variable, changes based on the independent variable. The dependent variable is examined.
2. It is a controlled experiment.
Explanation:
In a controlled experiment all variables are kept the same, except for the one being tested, which is called the experimental variable , or independent variable . This group is the experimental group . The group that is not affected by the experimental variable is the control group .
Very often a graph will be used to analyze the results of the experiment. The independent/experimental variable is placed on the x-axis and the dependent variable is placed on the y-axis. The dependent variable is what is measured as a result of the application of the experimental variable.
A variable that is independent is altered. Based on the independent variable, the responding variable, or dependent variable, alters. Examining the dependent variable. The experiment is carefully controlled.
What is an independent variable ?In mathematical modeling, statistical modeling, and experimental sciences, there are dependent and independent variables. Dependent variables get their name because, during an experiment, their values are investigated under the presumption or requirement that they are dependent on the values of other variables due to some law or rule.
A variable that is independent is precisely what it sounds like. It is a stand-alone variable that is unaffected by the other variables you are attempting to assess. Age, for instance, could be an independent variable.
When doing an experiment, the independent variable is what you alter, and the dependent variable is what changes as a result of that change. This is an easy way to conceive of independent and dependent variables.
Thus, based on the independent variable, the responding variable, or dependent variable, alters.
To learn more about independent variable, follow the link;
https://brainly.com/question/967776
#SPJ2
PLEASE HELPPPPPPPPPPPPPPPP
list atleast two examples of Arrhenius acids?
Answer:
HCl (hydrochloric acid) and H2SO4 (sulphuric acid)
I hope it helps.
A particular reaction has a DH o value of -164 kJ and DS o of -185 J/K at 298 K. Calculate DG o at 617 K in kJ (with 3 significant digits), assuming that DH o and DS o hardly change with temperature
Answer:
e
Explanation:
