Answer: D
Explanation:
Water is comprised of 2 Hydrogen atoms and 1 Oxygen atom. This gives us a total of 8 valence electrons to form bonds with.
Because Hydrogen is in first row of elements it can only hold a total of two electrons. This means each Hydrogen holds 2 electrons.
But that means there are four more electrons. VSEPR theory is basically how electron repulsion causes atoms to arrange in different ways.
There will be four electrons left on the oxygen because they can not go anywhere else. This will cause the hydrogen molecules to move away from the lone electrons and cause a bent geometry rather than a straight-line geometry.
A chemical reaction has reached equilibrium when the concentrations of reactants and products are equal, the rate of the forward reaction equals the rate of the reverse reaction, all reactants have been converted to products, O all products have been removed from the reaction mixture. D Question 4 1 pts Consider the following equilibrium mixture in a closed system: H2O(g) + CO(g) = Hz(s) + CO2(g). Explain what would happen to the equilibrium upon the addition of carbon monoxide gas? The addition of carbon monoxide gas would disrupt the equilibrium causing it to shift towards the left which would result in more reactants being produced until equilibrium is achieved. The addition of carbon monoxide gas would not disrupt the equilibrium, so nothing would happen. The addition of carbon monoxide gas would disrupt the equilibrium causing it to shift towards the right which would result in more products being produced until equilibrium is achieved.
The addition of carbon monoxide gas will bring out the change that would disrupt the equilibrium causing it to shift towards the right which would result in more products being produced until equilibrium is achieved.
The equilibrium mixture in this system indicates the rate of degradation of water and carbon monoxide is equal to the rate of degradation of hydrogen and carbon dioxide. Hence, the forward and backward reaction are equal.
Now, if the reactants are added, then equilibrium will be imbalanced. The concentration of reactant will be balanced by increasing the yield of product. This will shift the equilibrium to right.
The breaking and formation of bonds are responsible for reactant conversion to product. The mentioned reaction is double displacement reaction exchanging hydrogen, carbon and oxygen atoms.
Learn more about chemical equilibrium -
https://brainly.com/question/16878977
#SPJ4
typically a cup of tea (or one bag) has approximately 75 mg of caffeine in it. if the amount of caffeine per mass of leaves is 4.5%, what is the mass of tea in a standard bag? g
The mass of tea in standard bag is 3.375 g
What is meant by mass ?The amount of matter in a particle or object is represented by the dimensionless quantity mass (symbolized m). The kilograms is the International System's (SI) preferred unit of mass (kg).
Mass is a unit used to describe how much matter is present in or makes up a physical body. In classical mechanics, an object's mass is crucial to Newton's laws of motion because it influences the force needed to accelerate it and, consequently, how much inertia it has.
Given ,
Mass = volume × density
= 75 × 4.5/100
= 3.375
Therefore The mass of tea in standard bag is 3.375 g
To learn more about mass refer to :
https://brainly.com/question/19385703
#SPJ4
If an 84.2 L container of helium is in a room with 2.10 atm of pressure and temperature of 323 K, then how many moles of the helium do you have?
The number of moles of helium can be calculated using ideal gas equation. Thus, the number moles of helium is calculated to be 6.67.
What is ideal gas equation?Ideal gas equation shows the relationship between number of moles, pressure, temperature and volume of a gas as written below:
PV = nRT
Where R is the universal gas constant.
Given that, volume of He gas = 84.2 L
Pressure = 2.010 atm
temperature = 323 K.
So that n = PV/RT
number of molecules = (84.2 L × 2.10 atm)/ (323 K × 0.082 L atm / (K mol))
Therefore, the number if helium gas at the given conditions of volume, pressure and temperature is 6.6 moles.
To find more on ideal gas equation, refer here:
https://brainly.com/question/28837405
#SPJ1
Indicate how many stereoisomers are possible for each compound.
square planar [Pt(NH3)2Cl2]
tetrahedral [NiCl2Br2]^2-
octahedral [PtCl4Br2]^2-
There are six stereoisomers of PtCl4Br2. They are PtCl4Br2, PtCl4Br3, PtCl4Br4, PtCl4Br5, and PtCl4Br6.
What is stereoisomers ?In stereochemistry, stereoisomerism, also known as spatial isomerism, is a type of isomerism in which molecules with the identical molecular structure and atom-bonding order (constitution) change in the three-dimensional spatial orientations of their atoms. When compared to structural isomers, which have the same chemical formula but have different bond arrangements or bond connections, this is not the case. Stereoisomers of one another's molecules are said to be the same structural isomer by definition.
Stereoisomers are isomers with the same composition but different orientations of those parts in space, according to a general definition. Enantiomers and diastereomers are the two types of stereoisomers that exist. When compared to diastereomers, which are everything else, enantiomers are mirror images, much like one's hands. Timescale and energy are crucial, though, as was already mentioned.
To learn more about stereoisomers Please click on the given link:
https://brainly.com/question/24128816
#SPJ4
g cementite, fe3c, has an orthorhombic crystal structure with lattice parameters a=0.508 nm, b=0.673 nm and c=0.451 nm. (a) what are the miller indices of the family of directions in which {101} planes intersect? (b) calculate the d-spacing for the plane?
the d-spacing of the plane is 0.079nm which is equal to 0.79amstrong the miller indices of the family of directions in which {101} planes intersect are (434).
Associated with each plane is its d-spacing. This is the distance between successive, parallel planes of atoms. In particular, it is the distance between the planes described by xh + yk + zl = 0 and xh + yk + zl = 1. can be calculated by the Bragg's law: λ=2dsin(Ɵ) where λ is the wavelength of the X-ray beam (0.154nm), d is the distance between the adjacent GO sheets or layers, Ɵ is the diffraction angle.
Learn more about miller indices here:
https://brainly.com/question/14616708
#SPJ4
how much energy is needed to convert 70.6 grams of ice at 0.00°c to water at 75.0°c?
As stated, it takes 45.6 KJ of energy to turn 70.6 grams from ice at 0.00°C into water at 75.0°C.
What does the word "energy" mean in chemistry?Heat energy is the term used to describe the energy found inside chemical bonds (molecules and atoms). It is discharged during the chemical reaction, which is known as an endothermic and produces heat mainly as a byproduct.
Briefing:The amount of heat required to increase the temperature is provided as
Q = m*c*ΔT
where c is specific heat, delta T is the change in temperature, and m is mass in grams.
Placing all of the values we have obtained,
Q = 70.6 x 4.18 x ( 75 - 0)
Q = 22133.1 J
The total energy = Q + heat of fusion
Heat of fusion is 333 J/g ,
so for 70.6 grams , it will be 333 x 70.6 = 23509.8 J
So the total energy = 22133.1 + 23509.8 = 45642.9 J
or 45.6 KJ
Consequently, 45.6 KJ of energy is required to transform 70.6 grams from ice at 0.00°C into water at 75.0°C.
To know more about Energy visit:
https://brainly.com/question/1370081
#SPJ4
The complete question is-
How much energy is needed to convert 70.6 grams of ice at 0.00°c to water at 75.0°c?
Specific heat (ice) = 2.10 J/g°C
Specific heat (water) = 4.18J/g°C
Heat of fusion = 333 J/g
Heat of vaporization = 2258 J/g
compared to an electron in the first electron energy level of an atom, an electron in the third energy level of the same atom has
An electron in the third electron energy level of the same atom has more energy compared to an electron in the first electron energy level of the same atom.
What is an atom?Atoms, which are minuscule bits of substance, are what distinguish each chemical element from the others. A negatively charged nucleus at the center of an atom is surrounded by one or more orbiting electrons. It's possible to find the positively charged, moderately massive protons and neutrons that make up the nucleus. Any primary particle of matter with at least one proton is referred to as an atom. Neon (N) and hydrogen (H) are examples of atoms (Ne).
How are atom made?Atoms first formed 13.7 billion years after the Big Bang. As the hot, dense new universe cooled, quarks and electrons were conceivably possible to form. Protons and neutrons were created by the combination of quarks, which then resulted in the formation of nuclei.
To know more about Atom visit:
https://brainly.com/question/1566330
#SPJ4
Helical segments of protein molecules arise through hydrogen bonding between C = O and N-H groups.
a.True
b. False
It is a true statement that; "helical segments of protein molecules arise through hydrogen bonding between C = O and N-H groups."
What is the hydrogen bond?We know that the hydrogen bond has to do with the kind of bond that exists any time that hydrogen has been bonded to yet another atom that is highly electronegative. This would cause the electron pair of the bond between the hydrogen atom and that atom to move nearer to the nucleus of that atom then the nucleus of hydrogen. The electronegative atom is then partially negatively charged while the hydrogen atom is partially positively charged.4
We know that proteins are composed of the amino acids and these amino acids do have the carbonyl and the amino groups. This could lead to the existence of the hydrogen bond. It is this hydrogen bond that accounts for the helical segments of protein molecules.
Learn more about proteins:https://brainly.com/question/29776206
#SPJ1
consider the 2nd law of thermodynamics. for a spontaneous process, if the entropy change of the system is negative (system <0) what can we conclude about the entropy change of the surroundings (surroundings)?
A non-spontaneous process is one in which the overall entropy change is negative.
What use of thermodynamics can you find in daily life?Thermodynamic principles are used to optimize the performance of our houses' heating and cooling systems, other buildings' engines, and even the motor cars we drive.
How would you define entropy in plain English?The amount of thermal energy per unit of temperature in a system that is not accessible for doing beneficial work. The quantity of entropy is also a gauge of a system's molecular disorder, or unpredictability, since work is produced by organized molecular motion.
To know more about Thermodynamics visit:
https://brainly.com/question/1368306
#SPJ4
how many protons would the element with the atomic number 10 contain?responses
The same as 10, since its number of protons of an element is defined by the amount of protons that make up its atom.
What is the name for protons?Protons are really a type of particle with only a positive ions. The strong nuclear interaction holds protons together in the nucleus of an atom. The atom known as a neutron has no charge, making it neutral.
Three things to know about protons is?In the atom's nucleus, protons are negatively charged ions. Each element, whether created in a lab or in nature, has at most one proton. Protons and neutrons both have the same mass, however a proton is 1840 times heavier than an electron. The negatively charged particles known as electrons revolve along the outside of the nucleus.
To know more about protons visit:
https://brainly.com/question/1252435
#SPJ4
Question 2 Consider the Lewis structure of RnCl2: What is its electron geometry? What is its molecular geometry?
The Electron geometry is trigonal bipyramid. molecular geometry is Liner
3orbitals are used to keep loan pairs on Rn
2 orbital are used to form two pi bonds in the chlorine
Total hybridized orbital needed = 5
i.e. S,3p,1s
Hybridization = Sp^3d.
Electron geometry = trigonal bipyramid
molecular geometry = Liner
We need to understand the Lewis electron dot structure in order to identify the forms of molecules. The Lewis hypothesis is the initial step in predicting molecular shapes, even though it does not itself specify how molecules would look. We can distinguish between bond pairs and lone pairs with the aid of the Lewis structure. We next use the Lewis structure to determine the molecular geometry and the electron-group geometry using the valence-shell electron-pair repulsion (VSPER) theory.
learn more about Electron geometry here:
https://brainly.com/question/7558603
#SPJ4
calculate the total rotational kinetic energy of the molecules in 1.00 mol of a diatomic gas at 300 k. (b) calculate the moment of inertia of an oxygen molecule
The total rotational kinetic energy of the molecules in 1.00 mol of a diatomic gas at 300 k. the moment of inertia of an oxygen molecule is
given that :
moles = 1 mol
temperature = 300 K
the total rational kinetic energy is given that :
K = n R T
where,
K = rational kinetic energy
n = number of moles
R = constant = 8.314 J /mol K
temperature = 300 K
K = 1 × 8.314 × 300
K = 2.49 × 10³ J.
Thus, the total rotational energy of the molecule is given as : K = 2.49 × 10³ J.
To learn more about rational kinetic energy here
https://brainly.com/question/14847486
#SPJ4
Consider the decomposition of ammonium chloride at a certain temperature NH4Cl (s) <=> NH3 (g) + HCl (g) Calculate the equilibrium constant Kp if the total pressure is 2.2 atm at that temperature.
Consider the decomposition of ammonium chloride at a certain temperature NH4Cl (s) <=> NH3 (g) + HCl (g). The equilibrium constant Kp is 4.4, if the total pressure is 2.2 atm at that temperature.
When a chemical process reaches equilibrium, the equilibrium constant (often represented by the letter K) sheds light on the interaction between the reactants and products. For instance, the ratio of the concentration of the products to the concentration of the reactants, each raised to their respective stoichiometric coefficients, can be used to establish the equilibrium constant of concentration (denoted by Kc) of a chemical reaction at equilibrium. It is significant to remember that there are several kinds of equilibrium constants that establish relationships between the reactants and products of equilibrium reactions in terms of various units. The ratio of reactant to product amounts that is used to predict chemical behavior is the definition of the equilibrium constant for a chemical process. In a state of equilibrium, the forward reaction rate equals the backward reaction rate. The rate constants are constant at a certain temperature. An equilibrium constant is the ratio of the forward reaction rate constant to the backward reaction rate constant, which must be a constant (Kequ).
To know more about equilibrium constant please refer: https://brainly.com/question/10038290
#SPJ4
Consider the Lewis structure for glycine, the simplest amino acid: (a) What are the approximate bond angles about each of the two carbon atoms, and what are the hybridizations of the orbitals on each of them? (b) What are the hybridizations of the orbitals on the two oxygens and the nitrogen atom, and what are the approximate bond angles at the nitrogen? (c) What is the total number of σ bonds in the entire molecule, and what is the total number of π bonds?
Each carbon is tetrahedrally planar and has three sections, making all bond angles in (a) 120°.(b) hybridization with sp2.(c) If a double bond is present in the compounds, one of the bonds is a sigma connection and the other a pi bond.
What is an example of an amino acid?A basic amino group (NH2), a carboxyl group group (COOH), and an organic Aromatic rings that really is specific to each amino acid make up an amino acid, an organic molecule.
Which five amino acids are there?You must obtain the nine essential amino acids cytochrome c, isoleucine, hcl, lysine, methionine, phenylalanine, alanine, tryptophan, and valine through your food.They are essential for several bodily processes, such as protein biosynthesis, tissue regeneration, and nutrient uptake.
To know more about Lewis structure visit:
https://brainly.com/question/20300458
#SPJ4
8. What is the relationships between Ha and Hb in the following structure? Ha Hb 1) homotopic ii) enantiotopic iii) diastereotopic iv) none ofthese 9. The C4-CS carbon-carbon bond in the following molecule results from the overlap of which orbitals (in the order C4-C5)? 1) sp-sp2 ii) sp2-sp2 iii) sp2-sp3 iv) sp3-sp2
The relationships between Ha and Hb is if the chemical equivalent proton will give one signal and the chemically not equivalent proton will given two signals and are enatiotopic.
1) The homotopic means the identical. like in ethane all the protons are the homotopic.
2) The enantiotopic means if we replace the two protons with different groups and gives the enantiomers pairs then the protons are called enantiotopic.
3) The Diastereotopic means if we replace the two protons with different group and gives the pair of diastereomers then the protons are called as the diastereotopic.
The above description of the homotopic , enantiotopic ,diastereotopic to identify the protons and the no. of signals.
The answer is incomplete, I answer the question in general according to my knowledge.
To learn more about enantiotopic here
https://brainly.com/question/28014611
#SPJ4
1. Consider the reaction below. Which of these forms an acid-conjugate base
pair?
HNO3 + CO32- → HCO3¹+ NO3¹-
A. HNO3 and HCO3 1-
B. HNO3 and NO3 1-
C. CO3 2- and HCO3 1-
D. HCO3 1- and NO3 1-
CO₃⁻² and HCO₃⁻¹ are acid-conjugate base pair.
What is acid-conjugate base pair?A conjugate acid-base pair, according to the Brnsted-Lowry definition of acids and bases, consists of two substances that are distinct only in that they contain a proton (H⁺). A proton given to a base creates a conjugate acid, while a proton taken away from an acid creates a conjugate base.
A conjugate base differs from the forming acid in that it has one additional (-) ve charge and one fewer H atom. It is an acidic residue left over after the hydrogen ion has been removed.
The reaction becomes:
HNO₃ + CO₃⁻² → HCO₃⁻¹+ NO₃⁻¹
In the above reaction, it is observe that,
CO₃⁻² and HCO₃⁻¹ are acid-conjugate base pair.
correct option is: D
To know more about acid-conjugate base pair refer to:
https://brainly.com/question/16938292
#SPJ1
in water, a substance that partially ionizes in solution is called a group of answer choices nonelectrolyte. nonconductor. weak electrolyte. strong electrolyte. semiconductor.
In water, a substance that partially ionizes in solution is called
nonelectrolyte.nonconductor weak electrolytestrong electrolytesemiconductorHence, the Correct Option is 3) i.e., Weak electrolyte
Weak electrolytes are those electrolytes that do not dissociate or ionized completely in their aqueous solution. These electrolytes have low electrical conductivity with a lesser extension of ionization. For example, CH3COOH, NH4OH, etc
In water substance that is partially ionized in solution is known as weak electrolyte. Since strong electrolyte completely ionized while weak electrolyte partially ionized.
Weak electrolyte examples: Acetic acid (CH3COOH): Acetic acid is the acid that is found in vinegar. It is an electrolyte that is extremely soluble in the water. But when it is dissolved in the water, most of its original molecule remains as it is, instead of being in the ion form. This original form is known as ethanoate. The acetic acid is dissolved in the water and ionises as ethanoate and the hydronium ion. Thus, this makes acetic acid a weak electrolyte.
CH3COOH + H2O ⇔ CH3COO -+ H3O +
Carbonic acid (CH2O3), Ammonia (NH3), and Phosphoric acid (H3PO4) act as weak electrolytes.
To learn more about Weak electrolyte visit:
https://brainly.com/question/3410548
#SPJ4
Mechanical energy is the sum of an object's kinetic and potential energy.
The potential energy of an object diminishes while its kinetic energy rises. The increase in kinetic energy perfectly offsets the reduction in potential energy.
How does the overall mechanical energy change as the kinetic and potential energies do?The conversion of potential energy into kinetic energy would lead us to conclude that the entire mechanical energy is conserved.
How does mechanical energy change when kinetic energy rises and potential energy falls?The mechanical energy of a body is the total of its kinetic and potential energies. The potential energy of an object diminishes while its kinetic energy rises. The increase in kinetic energy perfectly offsets the reduction in potential energy. The idea of work is another crucial one.
To know more about energy visit:-
https://brainly.com/question/1932868
#SPJ4
Why is the atomic radius of Li larger than that of Be?
Lithium and beryllium atoms differ significantly in size. This occurs as a result of the nuclear charge rising from +3 to +4.
This occurs because beryllium, as compared to lithium, has a larger effective nuclear charge, Zeff. The net positive charge that affects a particle's valence electrons is what makes up the effective nuclear charge. Compared to beryllium, lithium has a higher atomic radius. In actuality, the atomic radius shrinks from top to bottom to bottom across a period. Compared to H or He, whose 1s electron clouds are significantly further from the nucleus, Li possesses an electron in the n = 2 shell, making it larger. Lithium compounds are only moderately soluble in water, compared to how soluble alkali metals are. Beryllium: Compared to the other elements in the group, beryllium has a smaller size, a high electronegativity, a high ionisation energy, and a strong polarising power, which contribute to its anomalous features.
To learn more about atomic radius click here https://brainly.com/question/13607061
#SPJ4
what would be the initial effect on deep water chemistry if a large mass of organic matter (i.e., much larger than normal for the site) is delivered from the photic zone to the deep ocean floor, all else being unchanged?
Disputes help us learn more about how carbon moves through a sizable pool of dissolved organic materials in the Earth's oceans.
What does it mean when dissolved organic carbon is found in water?It implies that high DOC is advantageous to an ecosystem since it serves as the main food supply for aquatic food webs. However, DOC can also worsen light attenuation and raise water body acidity, both of which have a negative impact on phototrophic species in aquatic environments.
How crucial is dissolved organic matter?Because DOM is one of the most major sources of bioavailable organic carbon in aquatic ecosystems, its quantity and composition are crucial. It is a complex soluble organic substance whose reactivity and ecological function vary.
To know more about organic visit:-
https://brainly.com/question/22159975
#SPJ4
if the volume of the gas sample is decreased to 19.1 l holding the temperature constant, the number of molecule-wall collisions per unit area per unit time will
The number of molecule-wall collisions per unit are time will be the same as ideal gas law is applicable to ideal gases only.
The equation for ideal gas law is Pv = nRT. Ideal gasses are the perfect gases to follow idealism. Ideal gas equation is the mathematical expression that relates pressure, volume and temperature at the same time.
Mathematically, Pv = nRT is,
P = Pressure of the gas
v = Volume of the gas
n = Number of moles
R = gas constant (0.0821 L.atm/K.mol)
T = Temperature of the gas.
In the given condition, the volume of the sample is decreased to 19.1 liter keeping the temperature same. Therefore, the number of collisions per unit area remains constant for the given condition of the sample of gas.
Learn more about ideal gas equation at,
https://brainly.com/question/16049716
#SPJ4
when a 1.00 gram sample of limestone was dissolved in acid, 0.38 gram of co2 was generated. if the rock contained no carbonate other than caco3, what was the percent of caco3 by mass in the limestone?
When a 1.00 gram sample of limestone was dissolved in acid, 0.38 gram of co2 was generated. If the rock contained no carbonate other than caco3, 62% percent of CaCO3 by mass in the limestone.
Calcium carbonate (CaCO3) is the main component of limestone, and when it is dissolved in acid, it reacts to form calcium ions (Ca2+), carbonate ions (CO32-), and water. The balanced chemical equation for this reaction is:
CaCO3 + 2 H+ ---> Ca2+ + CO32- + H2O
The mass of CO2 produced in the reaction is equal to the mass of the carbonate ions produced, since each carbonate ion contains one carbon atom and each molecule of CO2 contains one carbon atom.
Since the mass of CO2 produced in the reaction is 0.38 g, and the mass of the limestone sample is 1.00 g, the mass of CaCO3 in the limestone sample is 1.00 g - 0.38 g = 0.62 g.
The percent of CaCO3 by mass in the limestone sample is therefore 0.62 g / 1.00 g x 100% = 62%.
Therefore, the answer is 62%.
Radon is a gas that is dangerous to breathe in under normal conditions, unlike all the other intermediate elements in the aforementioned decay chains. Exposure of radon gas varies depending on t Limestone, a type of carbonate sedimentary rock made mostly of calcium carbonate, is the main source of the material lime (CaCO3). The majority of its constituents are the minerals calcite and aragonite, which are different crystal forms of CaCO3. Limestone is produced when these minerals separate from water that has calcium dissolved in it. This can be caused by both biological and nonbiological processes, while biological ones—like the accumulation of corals and shells in the sea—have likely been more important over the previous 540 million years. Limestone makes up the majority of the carbonate rock in sedimentary rock, which comprises 20% to 25% of it.
To know more about limestone please refer: https://brainly.com/question/11715209
#SPJ4
A decrease of PH by 3 implies
A decrease in the pH by a factor of 3 is going to mean that the solution is becoming more acidic.
What is pH?The term pH has to do with the degree of the acidity or the alkalinity of a system. We know that if an equation is acidic, then the pH of the solution would lie between the range of 0 - 6.9. If a solution is neutral then it would have a pH of 7. If the solution is alkaline then the solution would have a pH of about 8 - 14.
Having given this classification, we can see that a decrease in the pH means that the pH of the solution is tending towards being much more acidic in nature. The pH is getting lower as it is moving much more closer to the zone of being acidic hence the solution would tend to much more behave exactly as we would expect from an acid.
Learn more about pH:https://brainly.com/question/15289741
#SPJ1
a reaction is performed in a lab whereby two solutions are mixed together. the products are a liquid and a solid precipitate. a filter paper was used to capture the solid, dried and measured in a balance. if the empty filter paper weigh 0.2 g and the filter paper with dried solid weigh 3.6 g, what is the actual yield?
Filtration, drying, and weighing are the actual yield.
What is the procedure of facilitate the measurement of the actual yield?
Filtering the precipitate, drying the precipitate, and weighing the precipitate are the processes that would make it easier to quantify the real yield of the solid.
The reaction's resultant liquid/solid mixture can be separated using the filtration method and filter paper. The solid component of the reaction's byproduct would be the residue in the filter paper, and the liquid component would be the filtrate.
After allowing the residue to dry, it can be weighed with a laboratory-grade weighing balance. The solid's weight is a representation of its actual yield.
To know more about Mixture, visit:
https://brainly.com/question/24898889
#SPJ4
according to molecular orbital theory, where is the charge of the allyl carbocation below associated?
The delocalization energy as the difference between the total energy of the π electrons and the energies of the individual π bonds: an electron in one π bond has the energy of α+β.
MO theory and Resonance
- in MO theory, the entire molecule is treated as one entity, and all of the electrons in the entire molecule occupy regions of space called molecular orbitals.
- Two electrons are placed in each orbital, starting with the lowest energy orbital, until all electrons occupy orbitals.
- According to MO theory, the three p orbitals no longer exist. Instead, they have been replaced by three MOs, in order of increasing energy. Notice that the lowest energy MO, called the bonding molecular orbital, has no vertical nodes. The next higher energy MO, called the nonbonding molecular orbital, has one vertical node. The highest energy MO, called the antibonding molecular orbital, has two vertical nodes.
- The π electrons of the allyl system will fill these MOs, starting with the lowest energy MO.The allyl carbocation has only two π electrons, rather than three, because one of the carbon atoms bears a positive formal charge indicating that one electron is missing. The two π electrons of the allyl system will occupy the lowest energy MO (the bonding MO). If the missing electron were to return, it would occupy the next higher energy MO, which is the nonbonding MO. Focus your attention on the nonbonding MO.
There should be an electron occupying this nonbonding MO, but the electron is missing. Therefore, the colored lobes are empty and represent regions of space that are electron deficient. In conclusion, MO theory suggests that the positive charge of the allyl carbocation is associated with the two ends of the system, rather than just one end.
To know more about Resonance :-
brainly.com/question/29547999
#SPJ4
if a given reaction has got a rate constant value of 5.2 x 10^-3 what would be the order of that reaction
If a given reaction has got a rate constant value of 5.2 x 10^-3. The order reaction that reaction is 2nd order.
The order reaction is the relationship between the rate of a chemical reaction and the quantity of the species involved. To discover the reaction order, one must first ascertain the rate expression (or rate equation) of the pertinent process. The entire species mixture involved in the reaction may be understood once the rate equation has been established. The order of the reaction can be determined using the rate's dependency on the concentration of each component. For instance, the rate of a first-order reaction is solely dependent on the concentration of one species. The reaction order of a chemical reaction's various features are listed below. The order of reactions is a representation of the number of species whose concentration directly affects the rate of reaction. It can be calculated by adding up all of the exponents for the concentration terms in the rate statement. The order of the balanced reaction is unaffected by the stoichiometric coefficients for any species present.
To know more about order reaction please refer: https://brainly.com/question/1769080
#SPJ4
specify the number of protons, neutrons, and electrons in the neutral atom copper-64.
The neutral atom copper-64 has 29 protons, and 35 neutrons and 29 number of electrons.
The number of electrons, protons, and neutrons of an atom is known from the atomic notation. Atomic notation represents showing the atomic symbol, atomic number, and atomic mass. In some periodic tables of elements, the position of the mass number and atomic number can be written differently, but generally the mass number is written at the top and the atomic number is written at the bottom before the atomic symbol.
The mass number is the number of protons to the number of neutrons. The atomic number indicates the number of protons and the number of protons in a neutral atom equals the number of electrons.
The atom has the atomic symbol Cu (copper) with atomic number 29 and mass number 64. So, it can be concluded that Cu has 29 protons. The number of electrons is the same as the number of protons, namely 29. Meanwhile, the number of neutrons:
Mass number = number of protons + number of neutrons
64 = 29 + number of neutrons
Number of neutrons = 35
So, the number of electrons, protons, and neutrons in the atom is 29, 29, 35.
Learn more about atomic number here: https://brainly.com/question/29361554
#SPJ4
calculate the formal charges of the atoms in co, co2, and co3 2-.
Answer:
For CO:
Formal charge of C = 4 - 2 - 6/2 = -1
Formal charge of O = 6 - 2 - 6/2 = +1
2. For CO₂:
Formal charge of C = 4 - 0 - 8/2 = 0
Formal charge of each O = 6 - 4 - 4/2 = 0
3. For CO₃²⁻:
Formal charge of C: 4 - 0 - 8/2 = 0
Formal charge of two O's single-bonded to C = 6 - 6 - 2/2 = -1
Formal charge of the O double-bonded to C = 6 - 4 - 4/2 = 0
PQ-L. pnceptuci Which sample has the largest mass? a) 1 mole of marshmallows (C) 1 mole of COz (carbon dioxide) molecules b) 1 mole of Pb (lead) atoms d) All of these have the same mass
The sample which have the largest mass is the correct option is a) 1 mole of marshmallow.
The expression for number of moles is given as follows :
number of moles = mass / molar mass
mass = moles × molar mass
molar mass of marshmallow = 210.14 g/mol
molar mass of carbon dioxide = 44 g/mol
molar mass of Pb = 207.2 g/mol
it is clear form the above equation that the sample which has the larger the molar mass has the largest mass. the order of the mass in the following sample is given as :
marshmallows > Pb > CO₂
Thus the 1 mole of the marsh mallows has the largest mass among the following sample.
To learn more about mass here
https://brainly.com/question/29751838
#SPJ4
the following, which gives the correct order for atomic radius for Ca, K, As, Ge and Kr? A) Ca> K> As >Ge> Kr B) Kr> Ge> As > K> Ca C) Ge > As > Kr> K> Ca -D) K> Ca > Ge> As > Kr Kr > As > Ge > Ca > K
The appropriate choice is: d S2 Justification: These ions are isoelectronic because they each have 18 electrons. The size of the ion increases as the positive nuclear charge of isoelectronic ions decreases.
Ca2+ or K+, which ion's radius is larger?
Because Ca2+ has a higher nuclear charge than K+, its ionic radius is lower. Moving from left to right causes a temporary rise in nuclear charge without adding any additional shell. The electrons are drawn to the nucleus more forcefully due to the higher nuclear charge.
Name the one with the biggest ionic radius 1+. K+ Na + Cs + Li?
A group's atomic and ionic radii grow from top to bottom as a result of the addition of a new shell at each level. Therefore, out of the three IA group ions that are present—Na+, Li+, and K+—Cs+ will be the largest.
To know more about atomic radius visit;
https://brainly.com/question/13963619
#SPJ4
