choose one country each from Central and Eastern Europe which will be a a total of 2.
1. Discuss why you choose those countries, what would you like to see there.
2. Consider the pluses and minus of your chosen countries.
3. Consider cost of travel in the country, access from North America,
4. The type of food they serve.
5. Do you have any specific concerns about travel to these chosen countries and why?

Answers

Answer 1

I have chosen Poland and Romania as my two countries from Central and Eastern Europe. Poland is a great choice for a visit because it is a country with a rich history and culture. It is also a relatively inexpensive country to visit, with plenty of attractions to explore.

Romania is also a great choice for a visit, as it is a country with a unique culture and history. It is also a relatively inexpensive country to visit, with plenty of attractions to explore.

The pluses of both countries include their affordability, the variety of attractions, and the unique cultures. The minuses of both countries include the language barrier, as English is not widely spoken in either country. Additionally, both countries have a reputation for being somewhat dangerous, so it is important to be aware of your surroundings.

The cost of travel in both countries is relatively inexpensive, and there are direct flights from North America to both countries. The type of food served in both countries is varied, with traditional dishes from both countries being served in restaurants.

My main concern about travel to both countries is safety. It is important to be aware of your surroundings and to take precautions to ensure your safety.

know more about culture here

https://brainly.com/question/30447976#

#SPJ11


Related Questions

A stream flow-rate (Q) is calculated as the multiplication-product of surface-area (A) and flow-velocity (V), i.e., Q = V * A; then, how is the stream's surface-area (A) calculated?
*denotes multiplication.
Question 9 options:
stream length * stream length
stream length * stream width
water depth * stream length
water depth * stream width

Answers

The correct answer is "water depth * stream width." To calculate the stream's surface area (A), you multiply the water depth (vertical measurement) by the stream width (horizontal measurement).

To calculate the surface area (A) of a river, both depth and width must be considered. Depth represents the vertical measurement from the water surface to the creek bed, and creek width represents the horizontal measurement of the creek width.

Multiplying the depth of the water by the width of the river gives the surface area of ​​the river. This calculation accounts for both vertical and horizontal water expansion and gives an accurate measure of the total area through which water flows. It is important to consider both factors to accurately determine the water surface. 

To learn more about stream flow:

https://brainly.com/question/21696299

#SPJ4

Atmospheric circulation is a process that creates the Earth's Hadley cells that yield prevailing wind patterns we experience. Name and briefly describe the two main factors that create these Hadley cells with these winds? Name these 3 MAIN prevailing winds and where they are located [from the North pole south to the equator]

Answers

The two main factors that create the Hadley cells and prevailing wind patterns are:

Differential heating

Coriolis effect

The three main prevailing winds and their locations

Polar Easterlies: These winds blow from the polar regions (North or South) towards lower latitudes. In the Northern Hemisphere, they blow from the Northeast to the Southwest. In the Southern Hemisphere, they blow from the Southeast to the Northwest.

Prevailing Westerlies: These winds blow from the subtropical high-pressure zones towards the mid-latitudes. In the Northern Hemisphere, they blow from the Southwest to the Northeast. In the Southern Hemisphere, they blow from the Northwest to the Southeast.

Trade Winds: These winds blow towards the equator from the subtropical high-pressure zones. In the Northern Hemisphere, they blow from the Northeast to the Southwest. In the Southern Hemisphere, they blow from the Southeast to the Northwest.

Learn more about Atmospheric circulation at

https://brainly.com/question/26055231

#SPJ4

Describe how allometric growth in marginocephalia tricked
paleontologists into naming too many species. How is their
allometric growth consistent with the interpretation of
intraspecific competition?

Answers

The allometric growth in Marginocephalia led to the misidentification of multiple species by paleontologists.

How does allometric growth contribute to the misidentification of species?

Allometric growth refers to the differential growth rates of different body parts or structures within an organism. In Marginocephalia, a group of herbivorous dinosaurs that includes the well-known Triceratops, the frill and horns exhibit significant allometric growth.

Paleontologists initially interpreted these differences in size and shape as distinct species leading to an overestimation of species diversity. However, further research and analysis have revealed that these variations in frill and horn morphology are better explained by intraspecific competition.

Read more about marginocephalia

brainly.com/question/6598860

#SPJ4

a) Draw a sketch of the Rock Cycle which includes the majorrock types, and the key processes which result in their formation. Below your diagram, include a short definition of the major rock-forming processes in the cycle.
b) Name a specific place/geological environment (e.g. Hawaii Island chain, New Zealand North Island) where each major rock type described in your rock cycle diagram can be found.
c) For each answer to b) above, outline which specific rocks (e.g., tholeiitic basalts, arkose sandstones) and what geological structures are found in the place you named. Explain why these particular rocks and structures are found in that area, referring to the region’s tectonic setting.

Answers

a) Rock Cycle is the natural process by which rocks transform from one type to another type over time.

The key processes in the rock cycle are melting, weathering, erosion, compaction, cementation, metamorphism, and solidification. The different types of rocks that are formed by these processes are igneous, sedimentary, and metamorphic rocks.

The cycle begins when molten magma cools and solidifies to form igneous rocks. These rocks then undergo weathering and erosion to form sedimentary rocks.

These rocks undergo metamorphism and heat to form metamorphic rocks.

To know more about transform visit:

https://brainly.com/question/11709244

#SPJ11

. What are the major processes at work on the terrestrial planets’ surfaces? Which planet(s) appear to still be geologically active & how can you tell?
6. What is a magnetosphere? How do terrestrial & Jovian magnetic fields differ? What consequences could a planet suffer if it does not have a magnetic field (hint: look at Mars’ history)?
7. Compare & contrast Jupiter/Saturn vs. Uranus/Neptune in terms of size, general composition, cloud layers, ring systems, and number of satellites (i.e. what are the major trends?).
8. Which of the Jovian satellites might have liquid water oceans? Which of the Jovian satellites are volcanically active & what keeps them warm enough for this activity? Why are many of the smaller satellites (and in one case, a large one) considered "captured objects"?

Answers

The major processes at work on the terrestrial planets’ surfaces are volcanism, tectonic activity, erosion, and impact cratering. Earth and Mars appear to still be geologically active, as evidenced by the presence of volcanoes, tectonic activity, and erosion.

A magnetosphere is a region of space around a planet that is filled with a magnetic field. The terrestrial planets have relatively weak magnetic fields, while the Jovian planets have much stronger magnetic fields. If a planet does not have a magnetic field, it is more vulnerable to the effects of solar wind and cosmic radiation, which can strip away the atmosphere and cause other damage.

Jupiter and Saturn are much larger than Uranus and Neptune, and are composed mostly of hydrogen and helium. Jupiter and Saturn have multiple cloud layers and ring systems, while Uranus and Neptune have fewer cloud layers and no rings. Jupiter and Saturn have many more satellites than Uranus and Neptune.

Several of the Jovian satellites, such as Europa, Ganymede, and Enceladus, may have liquid water oceans beneath their icy surfaces. Io and Triton are volcanically active, and are kept warm enough for this activity by tidal heating.

know more about volcanism here

https://brainly.com/question/31045463#

#SPJ11

Which country does the United States get most of imported oil from? Canada Saudi Araba Mexico Iraq Russia

Answers

The United States gets most of its imported oil from Canada. Canada is the largest single foreign source of oil for the United States, accounting for around forty percent of the total amount of imported oil.

Correct option is A.

This is an important trade relationship which has been heavily relied on since the 1970s. Due to the high production rate and the large reserves of oil, Canada has been able to take advantage of the US as their customer. Furthermore, the oil extracted from the tar sands in the Alberta region is of a particularly high quality, allowing for increased export opportunities.

Even though the US has partnerships with other countries such as Saudi Arabia, Mexico, Iraq, and Russia, the Canadian oil industry has been and is expected to remain, the biggest supplier of imported oil for the United States.

Correct option is A.

know more about customer here

https://brainly.com/question/31192428#

#SPJ11

vDescribe the associated emissions of CO, HC, NOx and particulates at the three levels (raw material, fuel processing, transport use).
2. Describe the needed energy demand for transport in terms of raw material (energy content of), fuel production (energy content) and mechanical work (energy content). Try to reflect on these numbers (how "big" are these number compared to other sectors)

Answers

The emissions associated with the three levels of transport use (raw material, fuel processing, and transport use) vary depending on the type of fuel used.

For example, when using fossil fuels such as gasoline or diesel, the emissions of CO, HC, NOx, and particulates are higher than when using renewable fuels such as biodiesel or ethanol. At the raw material level, the emissions are mainly from the extraction and refining of the fuel. At the fuel processing level, the emissions are mainly from the combustion of the fuel. Finally, at the transport use level, the emissions are mainly from the exhaust of the vehicle.

The energy demand for transport is significant, and is composed of three components: raw material, fuel production, and mechanical work. The energy content of raw materials is typically measured in British Thermal Units (BTUs). The energy content of fuel production is typically measured in megajoules (MJ).

The energy content of mechanical work is typically measured in kilowatt-hours (kWh). The energy demand for transport is significant compared to other sectors, as it is responsible for a large portion of global energy consumption.

know more about biodiesel here

https://brainly.com/question/27801107#

#SPJ11

The texture of metamorphic rocks tells us about their: a. cooling depth b. type of cement c. pressure of formation d. energy of deposition e. none of these 2) is an example of an external process. a. wind b. pressure c. ice d. waves e. all but b 3) is the process where pieces of rock start collecting to form sedimentary rocks. a. crystallization b. weathering c. erosion d. deposition e. compaction 4) You would expect an extrusive igneous rock to have: a. interlocking crystals b. cooling cracks c. high strength large crystals e. all but b 5) Basaltic magmas have silica and form volcanoes. a. more, explosive b. less, non-explosive c. less, explosive d. more, nonexplosive

Answers

Metamorphic rocks are formed through the transformation of existing rocks due to changes in temperature, pressure, and/or chemical composition, resulting in the formation of new minerals and textures.

1. The texture of metamorphic rocks tells us about their pressure of formation.

2. all except b is an example of an external process.

3. deposition is the process where pieces of rock start collecting to form sedimentary rocks.

Sedimentary rocks are formed from the accumulation and cementation of sediments, which can include fragments of preexisting rocks, minerals, and organic matter.

4. You would expect an extrusive igneous rock to have all except b.

An extrusive igneous rock, also known as volcanic rock, is formed from lava that cools and solidifies on the Earth's surface. It typically has small or fine-grained crystals due to rapid cooling.

5. Basaltic magmas have less silica and form non-explosive volcanoes.

Basaltic magmas have lower silica content compared to other types of magmas. Lower silica content in basaltic magmas results in lower viscosity and ability to flow more easily. This fluidity allows gases to escape more readily, resulting in less explosive volcanic eruptions.

Know more about metamorphic rocks here:

https://brainly.com/question/32883112

#SPJ4

The question is not properly written. Hence the proper question is:

1. The texture of metamorphic rocks tells us about their:

a. cooling depth  

b. type of cement

c. pressure of formation

d. energy of deposition

e. none of these

2. ____ is an example of an external process.

a. wind

b. pressure

c. ice

d. waves

e. all except b

3. _____ is the process where pieces of rock start collecting to form sedimentary rocks.

a. crystallization

b. weathering

c. erosion

d. deposition

e. compaction

4. You would expect an extrusive igneous rock to have:

a. interlocking crystals

b. cooling cracks

c. high strength

d. large crystals

e. all except b

5. Basaltic magmas have ____ silica and form _____ volcanoes.

a. more, explosive

b. less, non-explosive

c. less, explosive

d. more, nonexplosive

Weather Hazards: Heat Index and Wind Chill Q1: If Yuma, AZ has a temperature of 110° F and relative humidity of 10%, what is the apparent temperature (THI) in Yuma? If Yuma, AZ has a temperature of 110 degrees F and relative humidity of 10%, then the apparent temperature in Yuma is approximately 96 degrees F. If Mobile, AL has a temperature of 100° F and relative humidity of 50%, what is the apparent temperature? Air conditioners cool and dehumidify. How does this affect the actual heat index numerical value? Why don't the weather reports include the heat index during the winter months? If the temperature is 40°F and the wind is blowing at 10 mph, what is the WET? Will you be in danger of suffering frostbite? Why or why not?

Answers

If Mobile, AL has a temperature of 100 degrees F and relative humidity of 50%, then the apparent temperature in Mobile is approximately 112 degrees F.

Air conditioners cool and dehumidify, which can help lower the actual heat index numerical value, making it more comfortable in warm conditions. Weather reports do not include the heat index during the winter months since it is not applicable; temperatures are usually too low for a heat index to be calculated accurately.

If the temperature is 40 degrees F and the wind is blowing at 10 mph, the wind chill temperature (WET) is 36 degrees F. At this low temperature, frostbite can occur in a matter of minutes, even if you're moderately active outdoors. Therefore, it is important to limit exposure to cold temperatures by dressing warmly and avoiding prolonged outdoor activity when the wind chill is below freezing.

know more about relative humidity here

https://brainly.com/question/30415486#

#SPJ11

4. Place the following stellar spectral classifications in
order, from highest temperature to lowest temperature. G,
K, A, B
6. Brown dwarfs are failed stars. (True or
false)

Answers

The correct order of stellar spectral classifications from highest temperature to lowest temperature is as follows: B, A, G, K

The spectral classification system, known as the Harvard spectral classification, arranges stars based on their surface temperature. In this system, stars are classified into different spectral types, denoted by letters. The sequence starts with the hottest and most massive stars (type O) and progresses to cooler and less massive stars (type M).

In this case, B is the highest temperature, followed by A, then G, and finally, K, which represents the coolest temperature among the given spectral classifications.

Learn more about Stellar here:

https://brainly.com/question/12790561

#SPJ4

Give your best interpretation of a depositional environment for the following: Gypsum and halite with some fine limestone (micrite), mud cracks, and layered algal beds. Give your best interpretation of a depositional environment for the following:
Give your best interpretation: Poorly sorted and not fully lithified mix of all sediment sizes (clay, silt, sand, and gravel) with striations visible on some surfaces.

Answers

1. The described characteristics suggest a depositional environment that could be interpreted as an evaporite basin.

Gypsum commonly forms in shallow marine or lacustrine environments with high salinity, while halite is typically associated with hypersaline conditions. The fine limestone results from the accumulation or precipitation of organic matter in a restricted marine setting.

Presence of mud cracks suggests alternating wet and dry periods, indicating a shallow water environment prone to periodic desiccation.

Layered algal beds indicate the growth and accumulation of algae in a calm, nutrient-rich environment.

2. The described characteristics suggest a possible depositional environment of a glacial till or glacial outwash deposit.

The presence of a poorly sorted and unconsolidated mix of sediment sizes, including clay, silt, sand, and gravel, is indicative of sedimentary material that has been transported and deposited by glacial processes. Glaciers are capable of picking up and carrying a wide range of sediment sizes as they advance and retreat.

The visible striations on some surfaces suggest the action of glacial abrasion. As glaciers move, they can scrape and polish the underlying rocks, leaving striations or scratches behind.

Learn more about glaciers here:

https://brainly.com/question/33486406

#SPJ4

The Great Lakes are tributaries meltwater lakes rias tarns

Answers

The Great Lakes are important bodies of water resulting from the erosive action of glaciers during the last ice age. Meltwater flowing off the glaciers carved deep valleys, created special topographic features like rias, fjords, and tarns, and ultimately formed the five Great Lakes of the region: Superior, Michigan, Huron, Erie, and Ontario.

Many rivers empty into the Great Lakes, depositing sediment in them, creating wetlands, and connecting them to the Atlantic Ocean. These lakes form an extensive freshwater system, are home to a wide array of fish and wildlife, and are a vital resource for the activities of humans living near them.

People use the Great Lakes for transportation, recreation, and industrial activities, such as manufacturing and power generation. The Great Lakes also serve as a hub for trade, tourism, and recreation, and they provide an ecosystem service which is essential for humankind.

know more about Great Lakes here

https://brainly.com/question/858802#

#SPJ11

correct question is :

The Great Lakes are tributaries meltwater lakes rias tarns. explain

Explain in two ways that can be used to carry out the following processes during an Environmental risk assessment (ERA) a. Risk analyses and Evaluation. b. Hazard identification

Answers

The Environmental risk assessment include:

a. Risk analyses- To identify the need for action at a location, a risk assessor gathers and organises information from environmental samples of water, soil, and air. They also generate exposure and risk calculations and provide an analysis of potential health hazards.

b. Hazard Identification-  This entails visiting the workplace on a regular basis to inspect the operating conditions of all the equipment in use there as well as the personnel's work procedures. When inspecting, it's important to look for any potential hazards that can endanger the workers. In addition to inspection, one should talk to the managers and employees who are present at the workplace.  This would aid us in determining other threats that employees may sense but that we are unable to inspect.

Environmental Risk Assessment (ERA) examines how various environmental factors, such as the introduction of genetically modified plants, the usage of specific chemicals in food, feed, and plant protection products, or the introduction and spread of plant pests, may affect the ecosystem.

Numerous particular environmental problems can be detrimental to people's health and wellbeing. Chemical pollution, air pollution, climate change, pathogenic bacteria, lack of access to health care, inadequate infrastructure, and poor water quality are some of these problems.

To learn more on Environmental risk assessment, here:

https://brainly.com/question/15847624

#SPJ4

At 10.1 µm wavelength of maximum radiation emission, what are
the corresponding temperatures (in K)?

Answers

The wavelength of maximum radiation emission, known as the peak wavelength, is directly related to the temperature of an object according to Wien's displacement law.

Wien's law states that the product of the peak wavelength and the temperature is constant. Using this relationship, we can determine the corresponding temperatures for a given wavelength.

In the case of a wavelength of 10.1 µm (micrometers) or 10.1 x 10^-6 meters, we can apply Wien's displacement law. The constant in Wien's law is approximately 2.898 × 10^-3 m·K. Dividing this constant by the given wavelength (10.1 x 10^-6 meters) gives us the corresponding temperature.

Calculating the temperature:

Temperature = Constant / Wavelength

Temperature = 2.898 × 10^-3 m·K / 10.1 x 10^-6 meters

Temperature ≈ 28645.5 K

Therefore, at a wavelength of 10.1 µm, the corresponding temperature is approximately 28645.5 Kelvin (K).

Learn more about corresponding temperatures here

https://brainly.com/question/31385801

#SPJ4

differential transmissivity of shortwave insolation and longwave terrestrial radiation by various atmospheric gases is better known as differential transmissivity of shortwave insolation and longwave terrestrial radiation by various atmospheric gases is better known as global dimming. global warming. cloud-albedo forcing. latent heat transfer. the greenhouse effect.

Answers

Answer: green house pls mark brayinliest  have a good night/day

Explanation: well Differential transmissivity of shortwave insolation and longwave terrestrial radiation by various atmospheric gases is better known as the green house

Which of the following is a strategy to reduce stormwater runoff
volumes (keep more runoff on site)?
Detention/retention basins
Pervious pavements
Bioswales
All of the above

Answers

All of the above are effective strategies to reduce stormwater runoff volumes.

Detention/retention basins are areas that capture runoff and release it slowly over a period of time, allowing it to soak into the soil around it and reducing the amount released downstream. Pervious pavements are specially designed pavements that contain a large proportion of voids, allowing the water to soak through it and reducing runoff volumes.

Bioswales are shallow depressions that slowly convey runoff water to a wetland or other managed outlet and are typically planted with drought tolerant vegetation to absorb some of the runoff. Together, these strategies help to keep more runoff on site and reduce the amount of runoff that leaves the property.

know more about stormwater here

https://brainly.com/question/32045307#

#SPJ11

How do you discern anthropogenic from natural anomalies?

Answers

From the historical perspective, you can discern anthropogenic from natural anomalies

What are the anomalies?

It is possible to determine if an anomaly falls within the range of natural variability or is a departure brought on by human activity by knowing the historical background and baseline conditions. Significant variances can be found by comparing current data to past records, long-term patterns, and natural cycles.

Studies on attribution seek to determine how much human activity is responsible for a certain anomaly. To quantify the contribution of different causes (both natural and human-induced) in causing observed changes, these studies frequently make use of sophisticated modeling approaches, such as climate models or simulations. This makes it possible to estimate how much of an abnormality can be traced to human activity.

Learn more about anthropogenic:https://brainly.com/question/30871467

#SPJ4

What geologic formation is the most likely source of most of the boulders and large cobbles on the beaches near Seattle?

Answers

The most likely source of most of the boulders and large cobbles on the beaches near Seattle is the Columbia River Basalt Group.

This geologic formation is composed of a series of lava flows that were erupted from the Columbia River Plateau between 17 and 6 million years ago. The basalt flows are composed of dark, fine-grained basaltic rocks that are very resistant to weathering and erosion.

As the basalt flows cooled, they fractured into large blocks and boulders that were then transported by the Columbia River and its tributaries to the beaches near Seattle. The large cobbles and boulders on the beaches are the remnants of these ancient lava flows.

know more about Columbia River here

https://brainly.com/question/30840043#

#SPJ11

List three ways in which scientists can detect changes in
climate, particularly due to the accumulation of carbon dioxide, by
examining the geologic record.

Answers

Scientists can examine the geologic record to detect changes in climate due to the accumulation of carbon dioxide by looking at the composition of the atmosphere.

By analyzing the composition of the atmosphere, scientists can determine the amount of carbon dioxide present in the atmosphere and compare it to past levels. This can help them to determine if the amount of carbon dioxide has increased over time, which could indicate a change in climate.

Scientists can also examine the geologic record to detect changes in climate due to the accumulation of carbon dioxide by looking at the temperature of the Earth’s surface. By analyzing the temperature of the Earth’s surface, scientists can determine if the temperature has increased over time, which could indicate a change in climate.

Finally, scientists can examine the geologic record to detect changes in climate due to the accumulation of carbon dioxide by looking at the amount of ice present in the polar regions. By analyzing the amount of ice present in the polar regions, scientists can determine if the amount of ice has decreased over time, which could indicate a change in climate.

know more about geologic record here

https://brainly.com/question/11353751#

#SPJ11

Rock fragments found at the base of a slope - known as talus - likely accumulated as a result of which mass movement type? Creep Flows Slides Slumps Falls

Answers

Rock fragments found at the base of a slope, known as talus, are likely to have accumulated as a result of falls.

What are the falls

Falls refer to the mass movement type where rocks or rock fragments detach from a steep slope and fall freely or bounce down the slope. This can occur due to the influence of gravity, weathering, erosion, or other factors that destabilize the rocks on the slope. As the rocks fall, they accumulate at the base of the slope, forming a talus cone or debris pile.

It's important to note that other mass movement types such as slides, slumps, flows, and creep can also occur depending on various factors like slope angle, slope materials, water content, and other geological conditions. However, based on the description given, falls are the most likely mass movement type responsible for the accumulation of rock fragments at the base of a slope, forming talus.

Read mroe on Rock fragments here https://brainly.com/question/31113491

#SPJ4

Which of the following statements are relevant for explaining cloud formation? Select one or more: a. Air temperature drops with altitude b. Cold air can hold less water in gaseous form than warm air c. Dry air holds less water than moist air \
d. If the air temperature drops below the dew point, some of the gaseous water will turn into liquid water

Answers

The correct options for explaining cloud formation are:Air temperature drops with altitudeCold air can hold less water in gaseous form than warm air.

Dry air holds less water than moist airIf the air temperature drops below the dew point, some of the gaseous water will turn into liquid water.CLOUD FORMATIONCloud formation refers to the process of the formation of clouds in the atmosphere.

It is a crucial part of the hydrological cycle of the earth. The cloud is formed through the process of cooling and condensation of water vapor or ice crystals.

The atmospheric condition plays an important role in cloud formation.

To know more about temperature visit:

https://brainly.com/question/7510619

#SPJ11

what are the living standards in luxembourg and why

Answers

Answer:

These are the living standards I know about:

The country ranks highest among the OECD countries in disposable income, and higher than average for jobs, work-life balance, community, civic engagement, health and well-being, housing, and environmental quality. The poverty rate in Luxembourg is 19.2%, which is €2,177 per adult.

Explanation:

Hope it helps :)

it is an assignment required in
350 words of subject indegenous science and stem

Answers

Indigenous Science and STEM relates to the knowledge passed down through generations by Indigenous peoples of the Americas. It is based on their experience and observations of their environment, and incorporates physical, biological and cultural elements.

Indigenous Science is founded upon the interconnections between humans and their natural environment, which is then used to form important theories and practices. It is inherently connected to STEM disciplines, such as mathematics, engineering, and sciences.

These disciplines are used to gain understanding of Indigenous Science's concepts and its implications on a broader scale. Indigenous Science and STEM are often studied together, as they each provide different perspectives and approaches to problem-solving that ultimately benefit all cultures.

know more about Indigenous here

https://brainly.com/question/8632762#

#SPJ11

Correct question is:

write an assignment required in 350 words of subject indegenous science and stem.

How can urban ecosystem be affected both by internal and
external factors?

Answers

Urban ecosystems can be affected by both internal and external factors, which can have significant impacts on their functioning and overall health.

Explanation of how each type of factor

Internal Factors:

Land use and urban design: The way land is used and urban areas are designed can impact the availability of green spaces, biodiversity, and habitat quality within the urban ecosystem. Poorly planned urbanization can lead to habitat fragmentation and loss of green areas.

Infrastructure and built environment: The construction of buildings, roads, and other infrastructure can alter the physical structure of the urban ecosystem. It can disrupt natural drainage patterns, affect water quality, and fragment habitats.

External Factors:

Climate change: Global climate change, including rising temperatures, changing precipitation patterns, and increased frequency of extreme weather events, can have profound effects on urban ecosystems. It can impact species distribution, alter plant phenology, and disrupt ecosystem functioning.

Regional air and water pollution: Pollution sources located outside urban areas, such as industrial facilities or agricultural activities, can contribute to air and water pollution in urban ecosystems. This pollution can impact air quality, water quality, and the health of urban plants and animals.

Learn more about ecosystem at

https://brainly.com/question/30187156

#SPJ4

In terms of temperature...
A. Venus is colder than Earth.
B. Venus is hotter than Earth.
C. Venus is similar in temperature to Earth.

Answers

In terms of temperature, Venus is hotter than Earth.

Venus is hotter than Earth as it has an average surface temperature of around 864 degrees Fahrenheit, which makes it the hottest planet in the solar system.

Earth's average surface temperature is 59 degrees Fahrenheit, making it much cooler than Venus.

The reason why Venus is so much hotter than Earth is because of its atmosphere.

To know more about temperaturevisit:

https://brainly.com/question/7510619

#SPJ11

Select all of the features present at an oceanic divergent plate boundary. HINT: You should select a total of 4 from below. Accretionary prism Trench Subduction of continental lithosphere Island arc Volcanoes on continents Subduction of oceanic lithosphere Rift Earthquakes Higher than surrounding areas Submarine volcanism

Answers

A divergent plate boundary is an area where two plates move away from each other. At this type of boundary, tectonic plates are separated by new material and various geological features are present, each exhibiting unique characteristics.

Accretionary prisms are formed by sediment that is pushed onto the edge of a tectonic plate, while trenches are formed by the sinking or subduction of an oceanic plate beneath another. Subduction of continental lithosphere occurs when a continental plate is overridden by an oceanic plate and forms volcanoes on continental landmasses.

Subduction of oceanic lithosphere occurs when two oceanic plates collide, forcing one under the other. A rift occurs when two plates tear apart, resulting in a linear depression on the surface of the earth. Earthquakes are common at divergent boundaries for obvious reasons. Submarine volcanism is the result of molten rock erupting from undersea volcanoes as a result of the two plates separating.

know more about geological features here

https://brainly.com/question/10208895#

#SPJ11

Mt. Rainier in Washington State is often thought to be the most hazardous volcano in the lower 48 states of the United States because a, the bodies indicate how rapidly the pyroclastic flows came, and this could be an indication of what could happen in the future b. there may be written records buried with the bodies that could be of use c. the reason that the people did not survive was because they were lying down on the ground, so this can teach future residents to stand up when a pyroclastic flow comes d. yolcanoes never happen again in the same location. so it is an indicator that this area is now safe

Answers

Volcanoes never happen again in the same location. so it is an indicator that this area is now safe. Thus, option D is the correct option.

Volcanoes can indeed erupt multiple times in the same location over the course of history. Mount Rainier, for example, is an active volcano that has erupted several times in the past and is considered potentially hazardous. The fact that a volcano has erupted before does not necessarily mean that it is now safe. Volcanic activity is influenced by various geological factors, and the reactivation of a volcano is possible.

The other options provided in the statement are more accurate in assessing the hazards associated with Mount Rainier. The presence of bodies indicating the rapidity of pyroclastic flows (option a) and the potential for buried written records (option b) can provide valuable information for understanding the volcano's behavior and potential hazards. Additionally, educating future residents about the dangers of pyroclastic flows and appropriate safety measures (option c) is important for mitigating risks in volcanic areas.

Learn more about volcanoes here:

https://brainly.com/question/14175701

#SPJ4

The difference between an asterism and a constellation is that an asterism is:
a. a group of stars bound together by gravity, whereas those in a constellation are not.
b. a group of stars, whereas a constellation is an area of the sky.
c. a group of stars represented by an easily recognized object, whereas a constellation is a group of stars represented by some abstract or imaginary figure.
d. the formal astronomical listing of a group of stars, whereas a constellation is a popular name for the group of stars usually inherited from ancient sky-watchers.
Which of the following statements about the sky is TRUE?
a. The distances to two stars must first be known in order to determine their separation distance.
b. Polaris was not always located at the North Pole.
c. The celestial sphere is located at the edge of the solar system, about the distance to Pluto.
d. The zenith is a point on the celestial sphere directly over Earth's North Pole.
An object with an apparent visual magnitude of +12 is:
a. similar in brightness to the full Moon.
b. 100 times brighter than an object whose magnitude is +17.
c. emitting 100 times less energy than an object whose magnitude is +17.
d. 12 times brighter than the dimmest star observable with the human eye.
Our system of expressing direction on Earth (i.e., N, S, E, W) is based on:
a. the star Polaris.
b. Earth's rotation.
c. the axial tilt of Earth.
d. the zenith.
Earth's axis is tilted from the perpendicular of its orbit. A consequence of this is that:
a. Earth and the moon are slowly separating from one another.
b. Earth is not always closest to the sun at the same time of the year.
c. Earth wobbles as it rotates, causing precession.
d. Earth experiences seasons.

Answers

1. Asterism: easily recognized group of stars; Constellation: group of stars represented by abstract or imaginary figure.

2. Earth's tilt causes seasons; Polaris not always at North Pole.

The distinction between an asterism and a heavenly body is that an asterism is: c. a gathering of stars addressed by an effectively perceived object, though a heavenly body is a gathering of stars addressed by some theoretical or nonexistent figure.

An asterism alludes to a more modest gathering of stars that structure a conspicuous shape or example inside a heavenly body. Groups of stars, then again, are bigger region of the sky assigned by unambiguous limits and frequently named after legendary or verifiable figures.

The Genuine assertion about the sky is: b. Polaris was not generally situated at the North Pole. Polaris, otherwise called the North Star, is right now found extremely near the North Heavenly Pole.

Nonetheless, because of the peculiarity of precession, the World's hub gradually changes its direction after some time, making the place of the North Divine Pole shift. This implies that Polaris has not forever been and won't generally be the North Star.

An article with an obvious visual greatness of +12 is: d. multiple times more splendid than the dimmest star detectable with the natural eye.

The greatness scale is logarithmic, implying that every entire number expansion in extent addresses a diminishing in brilliance by a component of around 2.5. In this way, an item with an extent of +12 is 12 stages more splendid than the dimmest stars noticeable to the unaided eye.

Our procedure for communicating course on The planet (i.e., N, S, E, W) depends on:

b. Earth's revolution. The cardinal headings (North, South, East) still up in the air by the revolution of the Earth. North is characterized as the course towards the North Pole, South is the other way, and East and West are opposite toward the North-South hub.

Earth's hub is shifted from the opposite of its circle. A result of this is that:

d. Earth encounters seasons. The slant of Earth's hub is liable for the evolving seasons. As Earth circles the Sun, various pieces of the planet get fluctuating measures of daylight consistently, bringing about the four seasons: spring, summer, fall, and winter.

In rundown: Distinction between an asterism and a star grouping: c

Genuine explanation about the sky: b

Object with an obvious visual greatness of +12: d

Means of communicating heading on The planet: b

Outcome of Earth's shifted pivot: d

To learn more about constellation, refer:

https://brainly.com/question/13387637

#SPJ4

Enormous changes in modern Turkey and Iran were brought about by Mustafa Kemal Ataturk and Ayatollah Khomeini. Explain how –
[a] Ataturk and Khomeini changed government and the legal system in Turkey and Iran

Answers

Enormous changes in modern Turkey and Iran were brought about by Mustafa Kemal Ataturk and Ayatollah Khomeini.

The changes that Ataturk and Khomeini brought about are as follows:A. Ataturk changed the government in Turkey by transforming the Ottoman Empire into a secular republic. This meant that he removed religion from politics.

Ataturk abolished the Sultanate and Caliphate, which were two of the pillars of the Ottoman Empire, and instead established a presidency in which a single person is responsible for overseeing the country.

Ataturk's actions were driven by his belief that Turkey could only prosper if it became more modern and secular.B. Ataturk and Khomeini changed the legal system in Turkey and Iran in different ways.

To know more about brought visit:

https://brainly.com/question/598271

#SPJ11

Air at the Earth's surface always flows faster than airflow aloft. moves from regions of high pressure to regions of low pressure. moves from regions of low density to regions of high density. moves from regions of low pressure to regions of high pressure. contains more moisture than air aloft.

Answers

At the Earth's surface, air always flows faster than airflow aloft because it is driven by differences in pressure. Air moves from regions of high pressure to regions of low pressure, and from regions of low density to regions of high density.

This is because air is less dense in regions of low pressure, and more dense in regions of high pressure. As air moves from high pressure to low pressure, it accelerates, creating wind. Additionally, air at the Earth's surface contains more moisture than air aloft. This is because air at the Earth's surface is closer to the ground, and is therefore more likely to come into contact with water sources such as oceans, lakes, and rivers.

This moisture is then carried aloft by the wind, creating clouds and precipitation. In summary, air at the Earth's surface always flows faster than airflow aloft because it is driven by differences in pressure, and contains more moisture than air aloft.

know more about low density here

https://brainly.com/question/9041034#

#SPJ11

Other Questions
Use the method of undetermined coefficients to find a general solution to the system x'(t) = Ax(t) + f(t), where A and f(t) are given. A = x(t) = 6 1 43 ,f(t) = 16 - 8 Suppose the system currently has two processes PO and Pl. (1) Let S and Q be two semaphores, which are both initialized to 1. The pseudo-codes of Po and P1 are shown as follows. Is it possible for the two processes to have a deadlock? Why? (4 marks) PO P1 wait(S) wait(S) wait(Q) wait(Q) // critical section // critical section signal(S) signal(Q) signal(Q) signal(S) (2) Let S, T and Q be three semaphores, where and T are both initialized to 1, and Q is initialized to 2. The pseudo-codes of PO and P1 are shown as follows. Is it possible for the two processes to have a deadlock? Why? (5 marks) PO P1 wait(S) wait(Q) wait(T) // critical section wait(S) wait(T) wait(Q) // critical section signal(T) signal(Q) signal(S) signal(Q) signal(T) signal(S) what were three financial decisions that chris made during the pursuit of happyness and describe the consequences that resulted With detailed Security Market line (SML); deduce the Capital Asset Pricing Model for computing the expected return of a risky asset. [8 Marks] question content areait would be acceptable to have the selling price of a product just above the variable costs and expenses of making and selling it in: a. the long run b. the short run c. both the short run and long run d. neither in the short run nor the long run Accounting is integral to the decision making process not only by those inside the organization as well as those outside the organization. These are known as the users of financial statements: List five users of financial statements and mention two specific piece of information in the financial statements they would be interested in. Jamestown, Inc. is family-owned C-corporation whose stock is not traded on an exchange. Jamestown, Inc. stock is owned as follows: Virginia 6,000 shares Miles 8,000 shares John 2,000 shares Hope 4,000 shares Z corporation 3,000 shares VM partnership 2,000 shares Total shares issued & outstanding 25,000 shares Virginia would like to redeem 3,000 shares of her stock. The stock has a fair market value of $500,000 and Virginia has a basis of $150/share for her stock. Her Belar are senctunts and predict product (10pT3) 21 3. (7 points) Evaluate \( \int_{-1}^{1} \int_{-\sqrt{1-x^{2}}}^{0} x^{2} d y d x \). In order to receive full credit you must sketch the region of integration. Explain how the systems of transaction processing and management information can be applied to an information system of a business on its different levels of management to take efficient managerial decisions explain how your online catering business will plan to prevent future complaints by responding to the following questions: Discuss the steps to win over unhappy customers. In your own words, make suggestions on how your catering company can plan to prevent customer complaints. Why do you think preventing customer complaints is important for the company? Consider the binary search algorithm from Section 12.6.2. If no match is found, the binarySearch function returns -1. Modify the function so that if target is not found, the function returns k, where k is the position before which the element should be inserted. Then, your main program will print the position where it was found. If not found, it will print the value after where it would be inserted :5 ptsYour code with commentsA screenshot of the executionTest Cases:List = [1, 4, 7, 10, 12, 15, 17, 20]Enter a number: 10Found in position 3Enter a number: 11Not Found. Insert after value 10.Section 12.6.2 code:def binarySearch(values, low, high, target):if low how to make a quizlet public The length of a rectangle is given by 9t+2 and its height is t, where t is time in seconds and the dimensions are in centimeters. Find the rate of change of the area with respect to time. A (t)= (1 point) Let P(t) be the population of a country, in millions, t years after 1990, with P(7) 3.25 and P(13)=3.65 (a) Find a formula for P(t) assuming that it is near P(t)= (b) Find a formula for P(t) a conical tank contains seawater to a height of 1 ft. the tank measures 4 ft high and 3 ft in radius. find the work needed to pump all the water to a level 1 ft above the rim of the tank. the specific weight of seawater is . give the exact answer (reduced fraction) in function of . Question 3 Let Determine f(x) = 3.1 limx-2-f(x). 3.2 limx-2+ f(x). 3.3 Show that limx-2 f(x) exist. (x - 1 x - 4x+6 if x > -2 if x < -2. Draw the correct Lewis dot structure of 10F s When I run the following code:public class GasTank {private double amount = 0;private double capacity;public GasTank(double i) {capacity = i;}public void addGas(double i) { amount += i; if(amount > capacity) amount = capacity; / amount = amount < capacity ? amount+i : capacity;/ }public void useGas(double i) { amount = amount < 0 ? 0 : amount - i; }public boolean isEmpty() { return amount < 0.1 ? true : false; }public boolean isFull() { return amount > (capacity-0.1) ? true : false; }public double getGasLevel() { return amount; }public double fillUp() { double blah = capacity - amount; amount = capacity; return blah; }}I get this error:CODELAB ANALYSIS: COMPILER ERROR(S)More Hints: I haven't yet seen a correct solution that uses: /Want More Hints? Click here Compiler Error If a = 3 + 5/2, then find the value of a^2+1/a^2