The k sp expressions for the reactions is Ks is [Ca2+]3 and [PO4 3+]2.Ks (solubility product) is the result of multiplying the calcium ion concentration by the phosphate ion concentration.
Discover Ks (solubility product)?Ks (solubility product) is the result of multiplying the calcium ion concentration by the phosphate ion concentration. When salt is introduced to water, it dissolves and the molecules split apart into ions. The following equation can be used to express it:
Ca3(PO4)2(s) <—> 2PO4 3+ with 3Ca2+ (aq)
The molecule's state is indicated by the letters s and aq. S stands for solid, and AQ for aqueous.
K = [D]d. [C]c/ [A]a. [B]b is the formula used to represent this constant in chemical equilibrium.
One further thing to keep in mind is that the constant only accounts for gases and aqueous molecules; solids and liquids have no bearing on it. In the equation, values are replaced by 1, and the constant is not affected by solids or liquids.
Since Ca3(PO4)2 is now solid, it has no effect on Ks; in this situation, the only relevant concentrations are those of Ca and PO4. This ions' expression of Ks is because they are products.
Ks=[Ca2+]3 and [PO4 3+]2.
To learn more about k sp expressions refer to:
https://brainly.com/question/28790035
#SPJ4
Use Lagrange multipliers to find the maximum and minimum values of the function subject to the given constraint. (If a value does not exist, enter NONE.) f(x, y z) = x^4 y^4 z^4; x^4 + y^4 + z^4 = 1
To use Lagrange multipliers, we need to find the partial derivatives of the function with respect to each variable and set them equal to a Lagrange multiplier times the partial derivative of the constraint with respect to that variable.
How to find the maximum and minimum values using Lagrange multipliers?The partial derivatives of the function are:
∂f/∂x = 4x^3y^4z^4
∂f/∂y = 4x^4y^3z^4
∂f/∂z = 4x^4y^4z^3
The partial derivative of the constraint with respect to each variable is simply:
∂g/∂x = 4x^3
∂g/∂y = 4y^3
∂g/∂z = 4z^3
Now we can set up the system of equations:
4x^3y^4z^4 = λ * 4x^3
4x^4y^3z^4 = λ * 4y^3
4x^4y^4z^3 = λ * 4z^3
x^4 + y^4 + z^4 = 1
Solving for x, y, and z in terms of λ:
x = (λ/4)^(1/3)
y = (λ/4)^(1/3)
z = (λ/4)^(1/3)
Substituting these values back into the constraint equation:
(λ/4)^(4/3) + (λ/4)^(4/3) + (λ/4)^(4/3) = 1
Simplifying:
3(λ/4)^(4/3) = 1
λ^(4/3) = 4/3
λ = (4/3)^(3/4)
Now we can substitute this value of λ back into the expressions for x, y, and z:
x = (4/3)^(1/4)
y = (4/3)^(1/4)
z = (4/3)^(1/4)
Finally, we can substitute these values back into the original function to find the maximum and minimum values:
f(x, y, z) = (4/3)^(4/4) = 4/3 (maximum value)
Note that since this is a maximum value, and since the constraint is an equality, there is no minimum value. So, the minimum value is NONE
To learn more about Lagrange multipliers, refer:
brainly.com/question/4609414
#SPJ4
Calculate ph of 1,0 mol/l of solution NH4Cl
Answer:
4.74.
Explanation:
The equilibrium equation for the hydrolysis of NH4+ is:
NH4+ + H2O ⇌ NH4OH + H+
The Cl- ion is a strong base and will not undergo hydrolysis in water. Therefore, the Cl- ion will not affect the pH of the solution.
Use the equilibrium constant for the hydrolysis of NH4+ (Kb) to calculate the pH of the solution.
The expression for the equilibrium constant for the hydrolysis of NH4+ is:
Kb = [NH4OH][H+] / [NH4+]
Given that the concentration of NH4Cl is 1.0 mol/L, the concentration of NH4+ ions is also 1.0 mol/L.
The concentration of hydroxide ions (OH-) can be calculated from the Kb expression:
Kb = [NH4OH][H+] / [NH4+]
[OH-] = Kb * [NH4+]
Knowing that the Kb for NH4+ = 1.810^-5
[OH-] = 1.810^-5 * 1.0 = 1.8*10^-5 M
The pH of the solution is the negative logarithm of the hydroxide ion concentration:
pH = -log([OH-])
pH = -log(1.8*10^-5)
pH = 4.74
Therefore, the pH of 1.0 mol/L solution of NH4Cl is 4.74.
Which of the following sets of results is indicative of stage 3 iron deficiency (iron deficiency anemia)?
A. Decreased ferritin, normal soluble transferrin receptor (sTfR), slightly increased total iron-binding capacity (TIBC)
B. Decreased ferritin, increased sTfR, increased TIBC
C. Decreased ferritin, increased sTfR, decreased TIBC
D. Increased ferritin, normal sTfR, increased TIBC
According to Sets of results is indicative of stage 3 iron deficiency. The correct answer is C. Decreased ferritin, increased sTfR, decreased TIBC.
Iron deficiency anemia is characterized by a decrease in the amount of iron stored in the body, which can be reflected by a low ferritin level. As the body's iron stores are depleted, the body produces more transferrin receptors (sTfR) in order to try to bind to more transferrin (a protein that carries iron in the blood). This leads to an increase in sTfR. As iron deficiency worsens, the total iron-binding capacity (TIBC) increases, as the body tries to compensate for the lack of iron by binding more iron to the transferrin. But in stage 3 iron deficiency, the body's iron stores are so low that the capacity to bind iron to transferrin is also decreased, resulting in a decreased TIBC.
Learn more about iron deficiency anemia here:
https://brainly.com/question/10145150
#SPJ4
which of the following can be accomplished by connecting a photovoltaic solar panel to a hydrogen fuel cell?
a. Solar Power and Cell
b. solar Cell
c. Photovoltaic Cells
d. solar panel's
a. Solar Energy and the Cell. By connecting a photovoltaic solar panel to a hydrogen fuel cell, the following may be accomplished: Photovoltaic panels or mirrors are used to concentrate solar energy.
Solar radiation is used by photovoltaic panels to convert sunlight into electrical energy. This energy can be turned into electricity or stored as thermal energy in batteries. Solar cells, often known as photovoltaic cells, convert sunlight directly into electricity. The term photovoltaics (abbreviated PV) comes from the photovoltaic effect, which is the process of converting light (photons) to energy (voltage). Photovoltaic solar energy is a type of clean, sustainable energy that creates electricity via the use of solar radiation. It is based on the photoelectric effect, which happens when specific materials absorb photons (light particles) and release electrons, resulting in the photoelectric effect.
learn more about photovoltaic here:
https://brainly.com/question/18417187
#SPJ4
a simplified model of benzene, c6h6, shows the six carbon atoms in a ring with alternate single and double bonds between the carbon atoms. each carbon atom is also bonded to one hydrogen atom. based on this model predict the c-c-c bond angle in benzene.
Based on the model of Neil Bohr, The C-C-C bond angle in benzene is 120 degree. This is because of resonance stabilized.
Based on the simplified model of benzene, C6H6, in which the six carbon atoms are arranged in a ring with alternate single and double bonds between them, the C-C-C bond angle is expected to be around 120 degrees. This is because the double bonds between the carbon atoms in benzene are considered to be "resonance stabilized", meaning that the electrons in the double bond are spread out over all six carbon atoms in the ring. This delocalization of electrons results in an increased stability for the compound, and it also causes the bond angles to be slightly smaller than the ideal bond angle of a tetrahedral carbon atom, which is 109.5 degrees. It's important to note that the bond angles in benzene are not exactly 120 degrees, but are intermediate between the angles expected for single (around 109.5 degrees) and double (around 180 degrees) carbon-carbon bonds, the exact bond angles of benzene are around 120.7 degrees, and this is a result of the pi-electron distribution in the ring.
To know more about benzene please refer: https://brainly.com/question/14525517
#SPJ4
When silver nitrate is mixed with potassium chloride, a double replacement reaction occurs. What are the products of this reaction?
AgNO3 + KCl -> ?
The products of the reaction as shown are silver chloride and potassium nitrate. option A
What is a reaction?If we talk about a reaction we have to look at the kind of combination in which there is the mixture of two or more substance that can be able to interact in some ways and then give rise to a product that is different from the products that were combined.
Here in the case of what we have here there is the combination of the silver nitrate and the potassium chloride and the products of the double replacement reaction that we would get are the silver chloride and the potassium nitrate.
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
Find the mass of aluminum required to produce 4.72 L of hydrogen gas at stp from the reaction described by the following equation: 2L + 3H2SO4 → AL2(SO4)3 + 3H2
The mass of aluminum required to produce 4.72 L of hydrogen gas at stp from the reaction 27g.
The mass of aluminum can be found in several ways?Protons or electrons, whichever is greater, make up the atomic number. Changing the neutron count from 14 to 13 and the atomic number. Therefore, aluminum's atomic mass is 13+14=27u.According to the periodic table, the mass of one mole of Al atoms is calculated to be 26.98 g, rounded to two decimal places.The mass of the compound's formula is calculated by summing the masses of its constituent atoms. The ions can be regarded as atoms in order to determine the formula mass because a proper formula is electrically neutral (with no net electrons gained or lost).Explanation:
13+14 =27.
To learn more about Mass refer to:
https://brainly.com/question/19385703
#SPJ4
______ results in a decrease in the number of c-z bonds, where z is an element that is more electronegative than carbon (usually o, n, or x).
The number of c-z bonds decreases as a result of oxidation, where z is a more electronegative element than carbon.
What is oxidation?In this case, oxidation refers to the decrease of C-H bonds or the increase of carbon to other elements (more electronegative) bonds, most commonly oxygen, rather than the increase in the oxidation number of the carbon atom.The number of C-Z bonds (where Z = O, N, or X denotes halogen) is determined by the valence electron present in Z. Covalent bonds exist primarily between carbon (c) and other atoms. To generate a covalent bond, an equal share of electrons is required for the sigma bond, and a vacant or partially filled p-orbital is required for the pi bond.This is a single covalent bond in which carbon shares its outer valence electrons with up to four hydrogens.To learn more about oxidation refer to :
https://brainly.com/question/13182308
#SPJ4
If 0.725 g of calcium nitrate was added to 4.25 g of water (Kfp = 1.86°C/m), what would you expect the freezing point of that solution to be?
The solution would have a freezing point of - 5.8 °C.
What is the freezing point of the solution?
We have to note that in this case, we are dealing with the freezing point of the solution and this is one of the colligative properties that we have. We do know that;
ΔT = K m i
ΔT = Change in the temperature
K = freezing constant
m = molality
i = Vant Hoff factor
Then;
Number of moles of the calcium nitrate = 0.725 g/164 g/mol
= 0.0044 moles
Molality of the solution = 0.0044 moles/4.25 * 10^-3 Kg
= 1.04 m
Then we have;
ΔT = 1.86 * 1.04 * 3
= 5.8 °C
Then we have the new freezing point as;
O °C - 5.8 °C = - 5.8 °C
Learn more about freezing point:https://brainly.com/question/3121416
#SPJ1
Arrange the necessary steps in order for finding the molecular formula of an unknown compound from mass percent data. Place the first step at the top of the list.
To find the molecular formula of an unknown compound from mass percent data, you can follow these steps. determine the molar mass of the compound by adding up the molar masses of each element present in the compound, using the mass percent data as a guide.
What are the necessary steps in order for finding the molecular formula?Use the molar mass and the empirical formula mass (which can be calculated from the empirical formula) to calculate the number of empirical formula units in the compound.Use this information to determine the molecular formula of the compound.First, determine the mass percent of each element present in the compound.Then, convert the mass percent of each element to moles by dividing by the molar mass of the element.Next, divide the moles of each element by the total moles of all elements to find the mole fraction of each element.Divide the mole fraction of each element by the smallest mole fraction. This gives you the subscripts in the empirical formula.From the empirical formula, calculate the formula mass and the molar mass of the compound Compare the molar mass and formula mass, and calculate the number of empirical formula units in the compound.Multiply the subscripts of the empirical formula by the number of formula units to find the molecular formula.It's important to note that the above steps are theoretical and in real-life scenarios, some analytical techniques like Mass Spectrometry(MS), Infrared Spectroscopy (IR), Nuclear Magnetic Resonance (NMR) spectroscopy, and X-ray Crystallography (XRD) are used to confirm the molecular formula of the compound.To learn more about molecular formula refer:
brainly.com/question/15960587
#SPJ4
A region of the IR spectrum can be used to differentiate between similar compounds that contain the same functional groups. Select the correct name of this region. O O O the downfield region the fingerprint region the functional group region the Ri region
The fingerprint region is the right term for this area. The IR spectrum of a molecule is a graphical depiction of the vibrational frequencies of the molecule's bonds.
The fingerprint area is the portion of the IR spectra between 1,000 and 400 cm-1 that is frequently used to distinguish between identical molecules with the same functional groups. This is due to the fact that each molecule has a unique bond configuration, which results in a unique set of vibrational frequencies.The fingerprint region is the right term for this area. The IR spectrum of a molecule is a graphical depiction of the vibrational frequencies of the molecule's bonds. It is possible to identify individual molecules and distinguish between similar ones by studying the peaks in the fingerprint area.The remaining areas indicated, the downfield, functional group, and Ri regions, are not typically used to define the IR spectrum.
learn more about IR spectrum here:
https://brainly.com/question/29753353
#SPJ4
thefunctionalgroupregion These are often connected to functional group stretching vibrationsA functional group's stretching vibrations are restricted to a small range
Functional connection is defined as the geographically dispersed neurophysiological events' temporal coherence (Friston, 1994). In other words, if there is a statistical link between the activity measurements that have been recorded for two areas, then those two regions are said to exhibit functional connectivity. This connection strategy is based on the idea that if two regions' functional activity is regularly associated, then those two areas are assumed to be connected or to be parts of the same network Functional connectivity is a considerably more direct method of analysing functional networks than effective connectivity studies, which rely on a number of assumptions about the underlying neurobiology and the model used to predict it. Particularly it is in agreement with the intuitive
Learn more about connected to functional here:
https://brainly.com/question/29739406
#SPJ4
in order for one type of atom to substitute for another in a solid solution, the substituting atom must be: (select all that apply.) identical in size similar in size the same element from the same group from the same period
"An atom must be similar in size" in order for one type of atom to substitute for another in a solid solution.
What properties must atoms share in order for them to substitute for one another?Atoms are called the basic building blocks of all matter. An element seems to be a substance that consist only one type of atom. Each element has their own name and distinct properties that set it apart from the others.The two atoms' sizes must be comparable. Otherwise, one atom cannot easily take the place of the other atom. The crystal structure of the two atoms must be the same. It would be difficult for one atom to substitute for the other if the two atoms crystallized in different ways.A substitution reaction occurs when one atom or group of a substance is replaced by another atom or group.The complete question:
"Select all that apply.
The requirements for one type of atom to substitute for another in a solid solution are:
All substitutions must be limited to the same element.
An atom must be identical in size.
An atom must be similar in size.
The substituting atom must be from the same period.
The substituting atom must be from the same group."
To learn more about atom refer to :
https://brainly.com/question/17545314
#SPJ4
(30 points) you wish to prepare a buffer of ph 7.4. circle which of the following systems should you choose and calculate the ratio of conjugate base to acid that you would need to make such a buffer? show your work.
The conjugate acid of a weak base, such as ammonia and an ammonium ion salt, can also be used to create buffers.
The best way to create a pH 7 buffer?Add 50 ml of potassium dihydrogen phosphate to 29.1 ml of 0.1 molar NaOH. Alternatively: Pour 1 liter of distilled water into a bowl and add 1.20 grams of sodium dihydrogen phosphate and 0.885 grams of disidium hydrogen phosphate.The conjugate acid of a weak base, such as ammonia and an ammonium ion salt, can also be used to create buffers. Each of these buffers has a significant distinction. An acidic buffer with a pH under 7 is created by combining HOAc and the OAc- ion. Basic buffers with a pH greater than 7 are formed by NH3 and NH4+ ion mixtures.To learn more about buffers refer to:
https://brainly.com/question/4177791
#SPJ4
What should you do with unused chemicals?
A. Return them to their original containers.
B. Throw them away with the regular trash.
C. Dump them down the sink.
D. Dispose of them as instructed on the safety ta sheet (SDS).
You should dispose of them as instructed on the safety data sheet (SDS).
What is SDS for chemicals?A Safety Data Sheet, formerly known as a Material Safety Data Sheet, is a thorough informational document created by a hazardous chemical's producer or importer. It gives a description of the product's chemical and physical characteristics.A safety data sheet (SDS), formerly known as a material safety data sheet (MSDS), is a document that offers details on the characteristics of dangerous chemicals, how they impact workplace health and safety, and how to handle dangerous substances in the workplace.Previously known as an MSDS (Material Safety Data Sheet), an SDS (Safety Data Sheet). Both MSDS and SDS documents serve the same function, which is to provide information about occupational health and safety for the various applications of the substances and goods.Learn more about Safety data sheet refer to :
https://brainly.com/question/23694150
#SPJ4
when 1,2-dibromo-1-phenylethane is heated with sodium hydroxide, a compound with the ir spectrum provided is produced. propose a structure for this product.
Manufacturers can employ sodium hydroxide to create products including soap, rayon, paper, explosives, colors, and petroleum goods. Other uses for sodium hydroxide include cleaning and processing metal, coating metal with oxide, electroplating, and electrolytic extraction.
Sodium hydroxide has a potent corrosive and irritant effect. Any tissue that it comes into contact with could be severely burned and permanently harmed. Proteins can be hydrolyzed by sodium hydroxide, which can result in burns to the eyes and possibly long-term damage to the eyes. The United States Environmental Protection Agency (EPA), the International Agency for Research on Cancer (IARC), and the Department of Health and Human Services (DHHS) has not classified sodium hydroxide for carcinogenicity in humans.
Learn more about Sodium hydroxide here:-
https://brainly.com/question/24010534
#SPJ4
which of the following compounds are drawn in the cis configuration? O b only O b, d, and e only O a and b only O d only
If the two substituents are on the same side of the double bond, the bond has a cis conformation. From the diagram below, B, D, and E only have the cis configuration.
If the two substituents are on the opposite sides of the double bond, the double bond has a trans configuration. In the context of chemistry, trans denotes that the functional groups (substituents) are on the same side of some plane, whereas cis implies that they are on the other (transverse) side. The same plane contains all six atoms. The cis isomer has two "X" and "Y" groups on the same side of the double bond. In the trans isomer, the "X" and "Y" groups are situated on opposite sides of the double bond. They do not interconvert because there is no rotation around the bond.
To learn more about isomers click here https://brainly.com/question/12796779
#SPJ4
complete question: which of the following compounds are drawn in the cis configuration? 1.D only 2. B only 3. B, D, and E only 4. A and B only
which of the following options correctly describes how straight-chain alkanes are named? multiple choice question. alkanes are named with the root based on the number of carbon atoms followed by the suffix -ane. alkanes are named with the number of carbon and hydrogen atoms followed by the suffix -ane. alkanes are not named according to the greek prefixes. alkanes are named with the root based on the number of hydrogen atoms followed by the suffix -ane. alkanes are named with the root based on the number of atoms followed by -ide.
The straight-chain alkanes are named with the root based on the number of carbon atoms present in the alkane, followed by the suffix -ane.
Alkanes are types organic compounds, a series of hydrocarbon compounds, that consist of single-bonded carbon and hydrogen atoms. These are known as saturated hydrocarbons. The formula for Alkanes is CnH2n+2, and are subdivided into three groups, namely - chain alkanes, cycloalkanes, and the branched alkanes.
Alkanes are the simplest series or family of hydrocarbons. They contain only carbon and hydrogen in simplest form. Each carbon atom forms four bonds (either with another carbon atom or a hydrogen atom) and each hydrogen atom forms one bond i.e. with a carbon atom.
Straight-chain alkanes or simply chain alkanes are named by using a stem/root that indicates the number of carbon atoms present in the alkane (meth = 1 C, eth = 2 C's, prop = 3 C's, etc.) to which is added the suffix -ane, indicating that the molecule is indeed an alkane (that is, that the carbon atoms are all connected by single bonds).
Thus first option is the answer to the question.
Learn more about straight-chain alkanes here:
https://brainly.com/question/22403008
#SPJ4
The photoelectron spectrum for the element nitrogen is represented above. Which of the following best explains how the spectrum is consistent with the electron shell model of the atom?
The spectrum is consistent with the electron shell model of the atom because it shows that electrons are being released from each of the energy levels of the atom in order from lowest to highest.
What is the electron ?
The electron is a subatomic particle with a negative electrical charge. It is the smallest and most fundamental particle of the atom. Electrons are found in the electron cloud of the atom, which is the region outside the nucleus. Electrons have a mass of about 9.10938356 x 10^-31 kilograms, which is about 1/1836 that of the proton. Electrons are the primary carriers of electricity in solids, and they are involved in all chemical reactions. Electrons occupy the outermost shell of the atom and are responsible for the chemical properties of the element. They determine the chemical behavior of an atom and are the main component of electrical circuits. Electrons are also responsible for the formation of ionic bonds, which are the basis of life and all other chemical processes.
To learn more about electron
https://brainly.com/question/28329307
#SPJ4
which of the following accurately describes the reaction shown above N2+3H2=2NH3
The reaction would go left under increased pressure.
What is the best statement?Though the question is incomplete and I can't find the complete answer online, I can try to give you an overview about the reaction. If we look at this reaction we can see that it is a reversible reaction.
We then know that the conditions of the reaction is what is going to determine the direction that the reaction is going to go in the system. Given the fact that we have more volumes on the left than on the right, the reaction would move to the left if the pressure is increased.
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
match the following. 1 . homogeneous a mixture that does not have a uniform composition and the individual components remain distinct. 2 . nonpolar a mixture that does have a uniform composition throughout and is always in the same state. 3 . unsaturated a substance that will not dissolve in a solvent. 4 . insoluble a homogeneous mixture 5 . polar a molecule with no internal charge variation due to bonding. 6 . heterogeneous a molecule with an uneven distribution of charge due to unequal sharing of electrons during bonding 7 . saturated a solution which has dissolved as much solute as it can at a particular temperature. 8 . solution a solution which is still able to dissolve solute.
A mixture is the combination of two more substances. There are two types of mixture : the heterogeneous mixture and the homogeneous mixture.
1) A mixture that does not have a uniform composition and the individual components remain distinct = heterogeneous mixture
2) A mixture that does have a uniform composition throughout and is always in the same state = homogeneous mixture
3) A substance that will not dissolve in a solvent = insoluble
4) homogeneous mixture = Solutions are made up of homogenous mixtures solute and solvent.
5) Molecule with no internal charge variation due to bonding = non - polar.
6) Heterogeneous a molecule with an uneven distribution of charge due to unequal sharing of electrons during bonding = polar
7) Saturated solution = . A solution which has dissolved as much solute as it can at a particular temperature.
8) Unsaturated = A solution which is still able to dissolve solute.
To learn more about mixture here
https://brainly.com/question/12679131
#SPJ4
Suppose that a Normal model describes the acidity (pH) of rainwater, and that water tested after last week's storm had a z-score of 1.8. This means that the acidity of that rain Select one: A. had a pH 1.8 times that of average rainwater. B. had a pH of 1.8. C. had a pH 1.8 higher than average rainfall. D. had a pH 1.8 standard deviations higher than that of average rainwater.E. varied with a standard deviation of 1.8.
For the question asked, the correct option is (D) i.e. 1.8 standard deviations higher in pH than the typical rainfall.
A z-score is a measure of how many standard deviations a particular data point lies from the mean of a normal distribution. If the pH of the rainwater after last week's storm has a z-score of 1.8, this means that the acidity of the rain was 1.8 standard deviations higher than the mean acidity of average rainfall. It is important to note that the pH scale is logarithmic, so a change of one unit in pH represents a ten-fold change in acidity. Therefore, a change of 1.8 units in pH represents a ten-fold change raised to the power of 1.8, which is a substantial increase in acidity.
To know more about pH please refer: https://brainly.com/question/29766400
#SPJ4
Krypton is a noble gas with several stable isotopes. Which of the following combinations of mass number (represented here as A) and neutrons (n) are possible as isotopes of krypton? Select all that apply. O A = 83, n = 47 O A = 82, n = 46 O A = 80, n = 36 O A = 84, n = 48 O A = 86, n = 49
The element krypton is a noble gas, meaning it is chemically inert and does not typically react with other elements.
What do you mean by noble gas?
Noble gases are a group of chemical elements in the periodic table that have very low reactivity and stable properties. They have eight valence electrons in their outermost electron shell, which makes them very stable and unreactive. The six noble gases are helium, neon, argon, krypton, xenon, and radon.
a. A=82, n=46
b. A=84, n=48
e. A=83, n=47
We can calculate the number of protons in the above options by subtracting the number of neutrons from the mass number. Kr has an atomic number of 36. As a result, the isotopes listed above are correct. These are the isotopes Kr-82, Kr-83, and Kr-84.
To know more about noble gas,
https://brainly.com/question/1984010
#SPJ4
Which of the following compounds are the same?
Compound 1: 1.10 g of H and 8.90 g of O.
Compound 2: 4.95 g of H and 40.05 g of O.
Compound 3: 2.10 g of H and 32.90 g of O.
Compound 4: 4.70 g of H and 60.30 g of O
A. Compounds 1 and 4
B. Compounds 2 and 4
C. Compounds 2 and 3
D. Compounds 1 and 2
Option C, compounds 2 and 3 are the compounds which are the same.
mole = mass/molar mass, mole of hydrogen = 2.10/1 = 2.10 and mole of oxygen = 32.90/15.99 = 2.10. Thus, 2.10g of H = 32.90g of O.
What is Molar mass?
Molar mass is the mass of one mole of a substance, typically measured in grams per mole. It is calculated by summing the atomic weights of all the atoms in a chemical compound.
It is important in determining the number of moles in a given mass of a substance, and in understanding the properties of a substance at a molecular level. It is also used in stoichiometry calculations to determine the amounts of reactants and products in chemical reactions.
To learn more about Molar mass, visit: https://brainly.com/question/21334167
#SPJ1
Consider the heterogenous equilibrium,
H2 (g) + S(s)<==> H2S (g) + heat
At a given temperature for this reaction, Keq = 14.3. What are the equilibrium concentrations of H2(g) and H2S (g) . when 0.200 mol of hydrogen and 6.00 mol of hydrogen sulfide are allowed to react and reach equilibrium in a 2.00 L container.
At a particular temperature, H2(g)+I2(g)2HI(g) equals 64. H2 and HI have heterogenous equilibrium concentrations of 2 and 16 mollit-1, respectively.
How does the straightforward reaction 2NO g O2 g)= 2NO2 g) flow overall?Second order in NO and first order in O2 is the reaction 2NO(g) + O2(g) 2NO2(g). The observed rate of the reaction at [NO] = 0.8 M and [O2] = 3.7 M is 0.00022022 M/s.
What does the equilibrium constant Keq equal?The concentration of the reactants is high at equilibrium if Keq is a small number (Keq1). In this instance, the reaction is in favor of reactants forming. According to Keq 1, the reactants and products are present in significant quantities.
To know more about heterogenous equilibrium visit:-
https://brainly.com/question/16612856
#SPJ1
Suppose an analytical chemist receives a sample of groundwater with a measured volume of 76.0 mL. Calculate the maximum mass n micrograms cadmium which the chemist could measure in this sample and still certify that the groundwater from which it standards came met Minnesota Department of Health Be sure your answer has the correct number of significant digits.
The maximum mass the micrograms of cadmium the chemist could measure in this sample is 3 × 10⁻¹ micrograms.
The limit for cadmium = 4.00 μg/L
The μg is called as micrograms.
An analytical chemist receives the sample of the groundwater with measured volume = 76.0 mL
The concentration expression is given as :
Concentration = mass / volume in L
where,
Mass = 4.00 μg
Volume = 0.076 L
Th mass is given as :
Mass = concentration × volume
Mass = 4 × 0.076
Mass = 3 × 10⁻¹ micrograms
Thus, the mass of cadmium is 3 × 10⁻¹ micrograms.
To learn more about mass here
https://brainly.com/question/14266954
#SPJ4
fiber inhibits intestinal absorption of various substances, including lead, which can then be secreted in the feces.
YES. The sentence in question is correct that fiber inhibits intestinal absorption of various substances, including lead, which can then be secreted in the feces.
Fibers are types of carbohydrates that the body cannot digest itself. Though most of the carbohydrates we intake are broken down into sugar molecules called glucose, fibers cannot be broken down into simpler sugar molecules, and instead they pass through the body undigested. Fibers help regulate the body’s use of sugars, helping by keeping hunger and blood sugar in check.
Soluble fiber attracts water present in the gut, forming a gel-like substance, which can slow digestion. This, in turn, may help prevent blood glucose surges after food intake and may reduce hunger. Control of blood glucose and weight is important for health because these are two of the main risk factors for diabetes, a condition which doubles the risk of developing a heart disease.
Eating lots of fiber, iron and especially thiamine-rich foods may induce/help in rapid removal and excretion of the lead from the body tissues. Thus fiber as in part of diet, plays an important role in digestion and intestinal absorption.
Learn more about intestinal absorption here:
https://brainly.com/question/1382667
#SPJ4
The complete question should be:
Fiber inhibits intestinal absorption of various substances, including lead, which can then be secreted in the feces. True or False?
the law of conservation of energy states that energy can not be created or destroyed but changed from one form to another. when gasoline is burned, the (mechanical, chemical, thermal) energy stored in the gas is converted to (mechanical, chemical, thermal) energy as the car moves and (mechanical, chemical, thermal) energy as it releases heat.
When car burns gasoline, it converts chemical energy into mechanical energy. This is according to the law of conservation of energy.
The law of conservation of energy states that energy is neither created nor destroyed. When people use energy that doesn't disappear. The Energy changes from one form of energy into another form of energy. A car engine burns gasoline. It converts the chemical energy in gasoline into mechanical energy. The mechanical energy is the sum of potential energy and kinetic energy. Energy changes form one into another but the total amount of energy in the universe stays the same. That means that a system always has the same amount of energy if it is not added from the outside.
To learn more about Law of conservation of energy please visit:
https://brainly.com/question/166559
#SPJ4
Correctly order the steps necessary to determine the molecular formula for a compound using combustion analysis data. Start with the first step at the top of the list. 1 Place these in the proper order. Determine the masses of carbon and hydrogen from the masses of Co, and H,0. Determine the molecular formula using the empirical formula and the molar mass. Determine the number of moles of each element in the compound and hence the empirical formula Determine the mass of oxygen, if present, by subtracting the masses of carbon and hydrogen from the total mass. Do you know the answer? I know it Think so Unsure No idea
The following is the right procedure to find out molecular formula of the compound these are steps:
Determine the mass of Carbon & Hydrogen from the CO₂ and H₂ODetermination of Oxygen , if presentDetermining the number of moles of each element and hence empirical formulaDetermining the molecular formula from the emprical formulaFrom a combustion analysis, how can you get the molecular formula?Take the grams of carbon, hydrogen, and oxygen and use them to calculate the empirical formula of the chemical. To find n, multiply the given molecular mass by the empirical formula mass and then compute the formula mass for the empirical formula. The molecular formula is obtained by multiplying each of the empirical formula's subscripts by n.
Do the empirical formula's molar mass calculations. Molecular mass determined using the empirical formula divided by the molecular mass provided. Add the entire number that was generated in step 2 to each subscript. The molecular equation is now this.
The molecular formula is obtained by multiplying each of the empirical formula's subscripts by n.
To learn more about molecular formula refer to:
brainly.com/question/26388921
#SPJ4
Carbonic acid is a buffer that contributes to pH stability in human blood. Write out this chemical equation and explain what happens if our blood increases or decreases in pH
Answer: HCO3- + H3O --> H2CO3 + H2O (If an a strong acid is present)
H2CO3 + OH- --> HCO3- + H2O (If a strong base is present)
Explanation: Thankfully, we have buffers in our blood, without this buffer, one cup of lemon juice contains enough Hydronium ions (H3O) to kill us. This brings us to our first reaction. In this H2CO3/HCO3- buffer system, HCO3- acts as a weak base. If some strong acid that 100% dissociates into H3O+ happens to enter your blood, instead of the pH decreasing significantly it will only decrease slightly as HCO3- eliminates the H3O+ maintaining a relatively equal pH.
On the other hand, we have the H2CO3 reaction, if, for example, you decided to inject yourself with NaOH (Don't do it) it will dissociate 100% into OH. Since H2CO3 is a weak acid it will react with a strong base eliminating the OH- thus maintaining a stable pH.
Hope this helps. and if you need an explanation of why pH goes up slightly please comment. Good luck with Acid/Base/Equilibrium!!
The density of hexane is 0.66g/ml and the density of water is 1.00gml. A 1.0 g sample of i2 is added to the mixture which is shaken again. Which of the following best predicts happens to the i2?
The i2 will settle to the bottom of the mixture,of the following best predicts happens to the i2.
What is the mixture?
The mixture is a combination of ingredients that are blended together to create a unique and distinct product. It can be anything from a cake batter to a marinade, a salad dressing to a bread dough. Mixtures often include multiple components that work together to produce the desired outcome. Plagiarism-free mixtures are created when each ingredient is carefully selected and all sources are properly cited. By using original ingredients, a mixture can be created that is both unique and delicious.
To learn more about mixture
https://brainly.com/question/1869437
#SPJ4
