Circle the letters of the places where portions of Earths fresh water are located

A. In streams B. In the atmosphere
C. In the oceans D. In lakes

Choose more than one

Answers

Answer 1

The portions of Earth's fresh water are located in lakes and streams.  The options A and D are correct.

What is freshwater?

The freshwater is the one which does not contains any harmful chemical and saltiness.

The oceans contains salt water and the lakes and the streams have fresh water.

So, the option A and D are correct.

Learn more about freshwater.

https://brainly.com/question/1295668

#SPJ1


Related Questions

find the energy u of the capacitor in terms of c and q by using the definition of capacitance and the formula for the energy in a capacitor.

Answers

The energy stored in a capacitor is determined as  ¹/₂Q²/C.

Energy stored in a capacitor

The energy stored in a capacitor is determined from the following formulas as shown below;

U = ¹/₂Q²/C

Where;

Q is the chargeC is capacitanceU is energy stored.

Thus, the energy stored in a capacitor is determined as  ¹/₂Q²/C.

Learn more about energy stored in a capacitor here: https://brainly.com/question/14811408

#SPJ11

Select the definition that best describes the term “ultimate tensile strength.”

Answers

Ultimate tensile strength is the maximum stress that a material can withstand just before fracture.

What is stress?

Stress is defined as the force acting per unit area. It is denoted by Sigma(σ)

When a body is undergoing stretch by applying a pull force, it stretches more and more until it reaches its elastic limit. A point comes when the body no more stretches and breaks or fractures at bottle neck formation. This strength of any material is known as Ultimate breaking Stress or Ultimate tensile strength.

Thus, Ultimate tensile strength is the maximum stress that a material can withstand just before fracture.

Learn more about Stress.

https://brainly.com/question/12871096

#SPJ1

Which of these is
considered "work"
according to
science?
A. pushing against a wall
B. babysitting
C. kicking a soccer ball

Answers

Answer:c

Explanation:work is force x distance. The wall doesn’t move any distance in A so that’s not work. B involves tasks that do work but I don’t think this is what they’re going for. For a short instance while kicking a ball, your foot is applying a force to the ball which moves a distance before following its own trajectory after contact with your foot. Because the contact has a short duration and isn’t instantaneous, this is work

In physics, work is the energy transferred to or from an object via the application of force along a displacement.

NEED ANSWER ASAP!!!! Tony pulls a luggage cart at an angle of 30° to the horizontal. The luggage cart has a mass of 35 kg, and he pulls with a force of 75 N.

a. What is the normal force on the luggage cart?

b. What force would Tony need to apply at a 30° angle to pull the luggage cart completely off the ground?

c. How does your answer in part (b) change as the angle increases?

Answers

a)The normal force on the luggage cart will be 305.85 N

b)The force would Tony needs to apply at a 30° angle to pull the luggage cart willl be 375 N.

What is the friction force?

It is a type of opposition force acting on the surface of the body that tries to oppose the motion of the body. its unit is Newton (N).

it is defined as the product of the coefficient of friction and normal reaction.

On resolving the given force and acceleration. Mathematically aion in the different components and balancing the equation gets.Components in the x-direction.

Given data;

The angle of pulling with horizontal. =  30°

Mass of luggage cart=35 kg

Pulling force= 75 N

The force in the y-direction;

N+Fsin30° = mg

N+75 sin 30° = 35 × 9.81

N=305.85 N

The force would Tony need to apply at a 30° angle to pull the luggage cart completely off the ground;

N-mg=Fsin30

Fsin30=75 sin 30

Fsin30=375 N

Hence the normal force on the luggage cart and force would Tony need to apply at a 30° angle to pull the luggage cart willl be 305.85 N and 375 N.

To learn more about the friction force refer to the link;

https://brainly.com/question/1714663

#SPJ1

With a burst of speed, Kevin swims one 25.0-m stretch in 9.22 s. What is Kevin's average speed over those 25 m

Answers

If Kevin swims one 25.0-m stretch in 9.22 seconds, his average speed is approximately 2.71m/s.

What is Kevin's average speed over those 25 m?

Speed is expressed as distance over time.

Speed = Distance / time

Given the data in the question

Distance = 25.0mTime elapsed = 9.22sAverage speed = ?

Average speed = 25.0m / 9.22s

Average speed = 2.71m/s

If Kevin swims one 25.0-m stretch in 9.22 seconds, his average speed is approximately 2.71m/s.

Learn more about average speed here: https://brainly.com/question/27571996

#SPJ11

Transparent or translucent materials
are used to make



A stop signs



B suitcases



C color filters





D toothbrushes

Answers

Answer:

C

Explanation:

you need to be able to see through a colour filter, which means youd need transparent or translucent

Transparent materials passes light and they reflect also. The color filters are made by transparent or translucent materials. Thus option c is correct.

What is transparency?

The ability of a material to pass light through it is called transparency. Some transparent materials can reflect the light. For example mirror, glasses etc. The materials which passes light but are not transparent is called translucent materials.

The material which does not pass light inside is called opaque. Wood, plastics etc. are opaque materials. Transparent covers, glasses make their inside visible.

Colour filters are made by transparent or translucent materials. They are used to filter or choose a particular colour from a group of reflected lights.

Color filters are used in spectrometers and other optical devices. They filter the incoming wavelengths to select the desired one. Hence, option c is correct.

To find more about color filters, refer the link below:

https://brainly.com/question/28455847

#SPJ2

Questions: 1. A table of weight 500N has four legs covering a total area of 0.5m². Calculate the pressure applied by the table on the ground

2. A man with a mass of 50kg, is standing on the ground. His two feet cover an area of 0.01m². calculate the pressure exerted by his two feet

3. An elephant has a weight of 40000N and her feet cover a total area of 0.5m². A woman weighs 600N and area of her heels in contact with the ground is 0.0075m². Who exerts the greatest pressure on the ground?

Answers

Answer:

shown below

Explanation:

1) P = F/A

P = 500 / 0.5

P = 1000N/m²

2) W = mg

W = 50 x 9.8

W = 490

P = F/A

P = 490 / 0.01

P = 49000N/m²

3) P = F/A

For E:

P = 40000 / 0.5

P = 80000N/m²

For W:

P = 600 / 0.0075

P = 80000N/m²

They're exerting the same amount of pressure on the ground

The distance between slits on a diffraction grating is 0.60
How large is the path difference?
mm, and one of the angles of diffraction is 0.30°. The
light forms a second-order bright band.
O 1047 nm
• 1571 nm
© 3142 nm
6284 nm

Answers

The path difference is 1.57 × 10⁻⁶ m

Distance is the amount of space between things. From distance, it is the hard to tell if someone's wearing the a vampire costume abd just a chic black outfit.

For constructive interference thai is formation of bright fringe through a diffraction grating is given by:

d sin θ = n λ

here, d is the distance between slits.

θ is the angle of diffraction

n is the order of fringe

and λ is the path difference.

λ = (d sin θ)/ n = (0.60 *10 ⁻³m) (sin 0.30°) ÷ 2 = 1.57 * 10⁻⁶ m

Learn more about distance here

https://brainly.com/question/26550516

#SPJ10

Answer:

C is the answer

Explanation:

Against the park ranger's advice, a visitor at a national park throws a stone horizontally off the edge of a 83 m high cliff and it lands a distance of 93 m from the edge of the cliff, narrowly missing a visitor below.
What was the initial horizontal velocity of the rock, in m/s? You can round your answer to the hundredths place and use g ≈ 10 m/s2.

Answers

the answer it would be 164 m

A glider with a mass of 2 kg is moving rightward at 1 m/s. A second glider, with a mass of 3 kg, is also moving rightward, at 5 m/s. After the two gliders collide, the first glider is moving rightward at 2 m/s. What is the velocity of the second glider after the collision

Answers

The velocity of the second glider after the collision is 4.33 m/s rightward.

Velocity of the second glider after the collision

Apply the principle of conservation of linear momentum;

m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂

where;

m₁ is mass of first gliderm₂ is mass of second glider u₁ is initial velocity of first glideru₂ is initial velocity of second gliderv is the final velocity of the gliders

(2)(1) + (3)(5) = (2)(2) + 3v₂

17 = 4 + 3v₂

3v₂ = 17 - 4

3v₂ = 13

v₂ = 13/3

v₂ = 4.33 m/s

Thus, the velocity of the second glider after the collision is 4.33 m/s rightward.

Learn more about linear momentum here: https://brainly.com/question/7538238

#SPJ1

The image shows positivle and negative charged particles bouncing around. Which state of matter is most likely represented in the image?​

Answers

Answer:

Gas Solid Liquid Plasma

Explanation:

Answer:

plasma

Explanation:

plasma has charged particles and ions and electrons floating around

Select the correct answer.
Jack lives in a society where he has almost no political power. Governmental institutions handle all political, social, and economic affairs.
Which political system is this?
OA. totalitarianism
B. monarchism
C. democracy
D. chiefdom

Answers

Monarchy!!!!!!!!!!!!!!!!!!!!!!!!!!

Answer:A or totalitarianism

Explanation: Totalitarianism is an authoritarian form of government in which the ruling party recognizes no limitations whatsoever on its power, including in its citizens' lives or rights

Some characteristics of totalitarianism:

Rule by a single party.

Total control of the military.

Total control over means of communication (such as newspapers, propaganda, etc…)

Police control with the use of terror as a control tactic.

Control of the economy.

Please, please help i will give 50 points to someone who will help me get this correct!!!!!

Answers

can you write the question because i cant see it

how do the interiors of jupiter and saturn differ? (select all that apply.)

Answers

The interior part of Jupiter and Saturn are different from each other due to difference of core and magnetic field.

How do the interiors of Jupiter and Saturn differ?

The interiors of Jupiter and Saturn differ from one another because Jupiter has a larger metallic hydrogen core as compared to Saturn. It has stronger magnetic field as compared to Saturn.

So we can conclude that the interior part of Jupiter and Saturn are different from each other due to difference of core and magnetic field.

Learn more about Jupiter here: https://brainly.com/question/3522722

#SPJ11

A compound microscope that has an eyepiece lens with a magnification of 10X and an objective lens with a magnification of 25X will have a total magnification of __________ times.

Answers

Answer:

35

Explanation:

total magnification = eyepiece lens x objective lens

TM = 10X x 25X

TM = 250X

What is the term for producing a current by moving a wire through a magnetic field?.

Answers

The answer is electromagnetic Induction.



I hope this answer will help you

write the function of force​

Answers

Answer:

Force can make a body that is at rest to move. It can stop a moving body or slow it down. It can accelerate the speed of a moving body. It can also change the direction of a moving body along with its shape and size.

Derive that efficiency is the ratio of output and input work.​

Answers

Answer:

The efficiency of a simple machine is defined as the ratio of useful work done by a machine (output work) to the total work put into the machine (input work). For ideal or perfect machine, work output is equal to the work input.

Explanation:

Hope it Helps!!!

the question is confusing ​

Answers

Alpha particles have highest mass.

Alpha particles are most ionising.

Gamma particles are the most penetrating.

Beta particles are negatively charged.

Gamma particles have the highest speed.

Comparing the three types of ionizing radiation-alpha particles have the greatest mass. Alpha particles have approx 4 times the mass of a proton or neutron and 8,000 times the mass of a beta particle. Ionising power of alpha particle is very high due to double positive charge, large mass as compared to a beta particle. Alpha particles can cause multiple ionisations within a very small distance. Beta radiation is more penetrating than alpha radiation. beta radiation can pass through the skin, but it is absorbed by a few cm of tissue of the body or a few mm of aluminum. Gamma radiation is the most penetrating of the three radiations. Alpha particles are positively charged, while beta particles are negatively charged, and gamma radiation is electrically neutral. Gamma rays are similar to visible light but they have higher energy. Gamma rays are emitted along with alpha or beta particles during radioactive decay.

learn more about gamma rays here:

https://brainly.com/question/2399890

#SPJ10

Which of the following consists of photovoltaic cells?
1. Solar panels
2. Rube Goldberg device
3. Solar oven
4. Electric generator

Answers

the answer is number 1 solar panels

what is true about solar system densities

Answers

The statement that is true about solar system densities is The denser planets lie closer to the Sun while the farther one planets from the sun have lower densities.

What is solar system?

Solar system comprises of the the planets, moon, stars, comets , smaller bodies and how they orbit around the sun.

Therefore, The statement that is true about solar system densities is The denser planets lie closer to the Sun.

Learn more about solar system below.

https://brainly.com/question/23169135

#SPJ11

which group on the periodic table wants to gain 2 electrons?

Answers

Answer:

Periodic

Explanation:

The groups in the periodic table that want to gain electrons are groups; 15, 16 and 17. The members of these groups are mostly nonmetals.

The length of a piece of tissue is 42 meters. How big is 3/7 of this piece?​

Answers

hi brainly user! ૮₍ ˃ ⤙ ˂ ₎ა

⊱┈────────────────────────┈⊰

[tex]\large \bold {ANSWER}[/tex]

[tex]\large \boxed { \large \sf \green{18}}[/tex]

3/7 of the fabric equals 18.

[tex]\large \bold {SOLUTION}[/tex]

To find the solution to your task, we will have to find 3/7 of 42, that is. How much is 3/7 of 42?

So, to find the value we must do the following way, multiply the value of the length of the fabric 42, by the numerator of the fraction 3 and divide by the denominator 7, See:

[tex]\begin{gathered}\Large\begin{array}{c}\tt\dfrac{3}{7}\:in\: 42\\\\ \tt 42\cdot 3=126\\\\ \tt 126\div 7=\boxed{\boxed{\tt 18}}\end{array}\end{gathered}[/tex]

Hence, 3/7 of the fabric equals 18.

Which moon shows evidence of rainfall and erosion by some liquid substance?.

Answers

Answer:

Titan.It is the largest moon of Saturn

Select the correct location on the image.
Identify the magnetic north pole of Earth’s magnet.

Answers

The magnetic north pole of the earth's magnet is in the geographic south pole.

There are two magnetic and geographic poles each, north and southThe two geographic poles are the locations where the earth's axis of rotation passes through which is imaginaryThe magnetic north and south poles are not the same as the geographic north and south polesIn a compass, the needle points to the magnetic north poleBy convention, the magnetic north pole corresponds to the geographic south poleThe magnetic south pole corresponds to the geographic north poleThe magnetic field lines of a magnet start from the magnetic north pole and end at the magnetic south pole

The magnetic north pole of the earth's magnet is the geographic south pole.

Learn more about earth's magnetism here:

https://brainly.com/question/3928159

#SPJ10

26.6 00
Fig. E26.6 both meters are ide-
alized, the battery has no appre-
ciable internal resistance, and the
ammeter reads 1.15 A. (a) What
does the voltmeter read? (b) What
is the emf & of the battery?
26.7 For the circuit shown
For the circuit shown in Figure E26.6
V
45.0 Ω
25.0 Ω
ww(A)
|15.0 Ω
www
|15.0 Ω
W
www
ww
4+
35.0 = ?
10.0 Ω

Answers

a. The voltmeter reads 0.053 volts

b. The electromotive force, emf of the battery is 0. 106 volts

How to determine the voltmeter reading

a. Given the current  = 1. 15A

Voltmeter reads the voltage = V

Resistance could be gotten from the diagram = R

V = IR

To find the resistance from the structure

First, find the resistance in parallel

Resistance in parallel = 1/R1 = 1/R2 + 1/R3 = 1/25 + 1/15 + 1/15 = 0. 17 Ohms

Now, find the resistance in series

Resistance in series = R1 + R2 + R3 = 45 + 0. 17 + 10 = 55. 17 Ohms

Finally, the  resistance in parallel = 1/35 + 1/55. 17 = 0. 028 + 0. 018 = 0. 046 Ohms

Substitute values into the equation

V = IR

V = 1. 15 * 0. 046

V = 0. 053 Volts

b. To find the Emf, use the formula

Emf =  V + Ir

Substitute the values into the formula

Emf = 0. 053 + 1.15 * 0.046

Emf  = 0. 053 + 0. 0529

Emf = 0. 106 volts

Therefore, the voltmeter reads 0.053 volts and the electromotive force of the battery us 0. 106 volts

Learn more about electromotive force here:

https://brainly.com/question/17082851

#SPJ1

describe in your own words the conditions established by forward- and reverse-bias conditions on a pâ€""n junction diode and how the resulting current is affected.

Answers

The conditions established by forward- and reverse-bias conditions on a P-N junction diode are: For forwarding bias, the current flows easily without opposition, this causes more current to pass, For reversed bias, the current flow is restricted and this causes less amount of current to pass.

Meaning of a Forward and reversed bias

A forward bias is a state attained by a diode as a result of its positive terminal that is connected to the positive part of a circuit and its negative terminal connected to the negative part of the circuit.

A reversed bias is a state attained by a diode as a result of its positive terminal that is connected to the negative part of a circuit and its negative terminal connected to the positive part of the circuit.

In conclusion, The conditions established by forward- and reverse-bias conditions on a P-N junction diode are: For forwarding bias, the current flows easily without opposition, which causes more current to pass, For reversed bias, the current flow is restricted and this causes less amount of current to pass.

Learn more about forward and reversed bias: https://brainly.com/question/20228400

#SPJ11

The conditions established by forward- and rear- bias conditions on a P- N junction diode are For encouraging bias, the current flows fluently without opposition, this causes further current to pass, For reversed bias, the current inflow is confined and this causes lower quantum of current to pass.

Meaning of a Forward and reversed bias-

A forward bias is a state attained by a diode as a result of its positive outstation that's connected to the positive part of a circuit and its negative terminal connected to the negative part of the circuit.

A reversed bias is a state attained by a diode as a result of its positive outstation that's connected to the negative part of a circuit and its negative terminal connected to the positive part of the circuit.

In conclusion, The conditions established by forward- and rear- bias conditions on a P- N junction diode are For encouraging bias, the current flows fluently without opposition, which causes further current to pass, For reversed bias, the current inflow is confined and this causes lower quantum of current to pass.

Learn more about forward and reversed bias here:

https://brainly.com/question/24500692

#SPJ10

Which observations correctly describe the second law of thermodynamics? check all that apply.

thermal energy that is not used to do work is often released to the surroundings.

thermal energy flows from a cooler object to a warmer object.

thermal energy flows from a warmer object to a cooler object.

thermal energy is released as unusable energy by a heat engine, which is never 100 percent efficient.

thermal energy flows when two objects in contact have a temperature difference.

answers: 1,3,4,5

Answers

Answer:

I would agree with the answers 1, 3, 4, 5

Obviously energy will not spontaneously flow from a cooler object to a warmer object

Answer:

A. Thermal energy that is not used to do work is often released to the surroundings.

C. Thermal energy flows from a warmer object to a cooler object.

D. Thermal energy is released as unusable energy by a heat engine, which is never 100 percent efficient.

E. Thermal energy flows when two objects in contact have a temperature difference.

Explanation:

Got it right on edge 23

Use wave equation calculate the speed of sound in the air if frequency of 110 hz has a wave length of 3 m

Answers

Answer = 330 m/s

The wave equation is as follows:

Wave speed = wavelength x frequency

The known values are:
Wavelength = 3m
Frequency = 110 Hz

Substitute the known values into the wave equation to find the wave speed.

Wave speed = 3 x 110

Wave speed = 330 m/s

How would the number 13,900 be written using scientific notation?
a. 13.9 x 104
C.
b. 1.39 x 104
1.39 x 10³
d. 1.39 x 105
Which one is it??

Answers

Answer:

um d. but I am guessing this ans

Other Questions
Prove triangle ABC is congruent to triangle DEC. What is the value of x in the equation 1/5 x-2/3y = 30, when y = 15? Oil inc. and petro corporation form a joint venture to design and test petroleum storage facilities and equipment. when a dispute arises, oil files a suit against petro. the court is most likely to apply the same principles to this joint venture as it applies to group of answer choices limited liability companies. corporations. sole proprietorships. partnerships. Kiesha was up for a promotion at work but didn't get it. She believes her coworker Mark got the job because of his gender. Because Kiesha believes she was treated unfairly, her bloodstream likely contains high levels of Help please help! Need help Preform the indicated operation.(2x+y)(3 x + y) Dihybrid crosses??? pls tell this answers Read the sentence. it always makes some students uncomfortable. which revision best establishes clarity? taking tests makes us uncomfortable. it always makes some students uncomfortable taking tests. it always makes some students, taking tests, uncomfortable. taking tests always makes some students uncomfortable. A breastfeeding mother is worried that her baby will develop food allergies if she eats peanuts or tree nuts before breastfeeding. Food allergies do not develop after breastfeeding, but they do develop if the infant is formula fed. Current evidence regarding breastfeeding and food allergies states that Si en un autobs hay disponibles solo tres asientos y siete personas estn de pie De cuntas maneras distintas podran ocupar esos asientos? Simplify24xy6xfor all x = 0. Camacho is buying a monster truck. The price of the truck is x dollars, and he also has to pay a 13%, percent monster truck tax. Which of the following expressions could represent how much Camacho pays in total for the truck? which statement about hormone replacement therapy is true? Question 13 of 32Which of the following is an example of a healthy dating relationship?OA. One person convinces the other that they are meant to be togetherforever.B. One person insists that they split the check for a meal.OC. One person insists that he or she get a goodnight kiss.OD. One person pressures the other into stepping outside his or hercomfort zone.SUBMIT Justify the following statement - 'You can't always tell if a person has an intellectual disability by looking at them.' . Write a paragraph (three to five sentences) to explain how your allocation of Marc andJulian's portfolio matches their investment goals and priorities. (12 points) 128 (4 + 2) = (128 4) + 2A. TrueB. False Meeting planners might find themselves doing all of the following except:1.arranging for technical and audiovisual needs2.establishing agenda, objectives, and budget3.establishing policies and programs for business travel4.working with vendors to secure locations The basic difference between consumer goods and capital goods is that Multiple Choice consumer goods satisfy wants directly, while capital goods satisfy wants indirectly. an economy that commits a relatively large proportion of its resources to capital goods must accept a lower growth rate. consumer goods are produced in the private sector and capital goods are produced in the public sector. the production of capital goods is not subject to the law of increasing opportunity costs.