Tonicity of solution made by dissolving 9.0g of sodium chloride in 1.0l of water : solution is isotonic because it has a 0.9%m/v concentration of sodium chloride.
What do you understand by tonicity?Capability of a solution to modify the volume of cells by altering their water content is called tonicity . Movement of water into a cell can cause hypotonicity or hypertonicity when water moves out of the cell.
A solution is said to be isotonic when it has the same concentration of the solutes as another solution and this occurs across a semipermeable membrane. Use of this chemical in human anatomy is rare but it describes muscles that have a similar tone as the normal comparisons.
To know more about tonicity, refer
https://brainly.com/question/17929907
#SPJ4
Note: The question given on the portal is incomplete. Here is the complete question.
Question: Classify the tonicity of a solution made by dissolving 9.0g of sodium chloride in 1.0l of water. choose the correct answer and explanation below.
The solution is hypertonic because it has a 9.0% m/v concentration of sodium chloride.
The solution is hypotonic because it has a 9.0% mlv concentration of sodium chloride.
The solution is isotonic because it has a 9.0% mv concentration of sodium chloride.
The solution is hypertonic because it has a 0.9% m/v concentration of sodium chloride.
The solution is hypotonic because it has a 0.97 m/v concentration of sodium chloride.
The solution is isotonic because it has a 0.9% m/v concentration of sodium chloride
Identify type of reaction CaO + H2O
The reaction is showing Synthesis, where two molecules react to yield a new compound.
What happened to elements and compounds that are dissolved in a solution when the water evaporates?; What are two ways that compounds are different from the elements that form them?; Is water an element?
When a solution of substances dissolves and the water evaporates, the elements and compounds crystallize. They only have one kind of molecule in them.
A group of two or more atoms bound together by the attractive forces known as chemical bonds is referred to as a molecule; depending on the context, the term may or may not include ions that meet this requirement. When referring to polyatomic ions, the word "molecule" is frequently used instead of the word "ion" in quantum physics, organic chemistry, and biochemistry.
The oxygen molecule (O2), for example, has two atoms, making it homonuclear. Alternatively, a molecule can be heteronuclear, which is a chemical complex made up of more than one element, such as water (two hydrogen atoms and one oxygen atom; H2O). Any gaseous particle, regardless of its composition, is frequently referred to as a "molecule" in the kinetic theory of gases.
Learn more about molecule here:
https://brainly.com/question/19922822
#SPJ4
What does pH Measure? | What is the pH of water?
The pH of a solution gauges how acidic it is. The pH of pure water is 7.
The pH scale is used in chemistry to determine whether an aqueous solution is basic or acidic. The term pH originally meant "potential of hydrogen." Acidic solutions often have lower pH values than basic or alkaline solutions.
Water is neither acidic nor basic, having a pH of 7, which indicates that it is neutral. The scale goes from 0 (extremely acidic) to 14 (very alkaline) (very basic). Water often falls between the range of 6.5 and 8.5 on the scale.
Pure water has a pH of seven. In pure water, the concentration of the hydrogen ion and the hydroxide ion is equal, making it neutral.
For more information on pH kindly visit to
https://brainly.com/question/13213888
#SPJ4
What is the percent by mass of oxygen in carbon dioxide CO2 )?; What is the percent by mass of carbon in carbon dioxide CO2 )?; How do you find the percentage of oxygen in CO2?; What is the percent by mass of carbon in 44g of CO2?; How do you calculate the percentage of oxygen?
As a result, oxygen makes up 72.7% of carbon dioxide, or 72.7 g of oxygen for every 100 g of carbon dioxide.
What is the oxygen content in carbon dioxide (CO2) in terms of mass percent (%)?Carbon dioxide contains 72.71 percent oxygen by mass. Carbon dioxide has a molar mass of 44.01 grams per mole, compared to oxygen's molar mass of 15.999 grams per mole.
What is the change in CO2 emissions as a percentage?Because to human activity, atmospheric CO2 has increased by 50% since the start of the industrial era (in the 18th century), making it 150% higher than it was in 1750. This is more significant than the end of the last ice age, which naturally occurred 20,000 years ago.
To know more about carbon dioxide visit :-
https://brainly.com/question/3049557
#SPJ4
the greenhouse gas n2o is important to human-caused climate change. this gas is produced in the soil by microbes called denitrifiers that convert no3- (nitrate) to n2o. they do this most effectively when there is a lot of no3- in the soil. given this, which of the following would most likely lead to more n2o emissions?
The most likely lead to more n2o emissions is fertilization of agricultural fields.
What is greenhouse gas?
A gas that produces the greenhouse effect by both absorbing and emitting radiant energy in the thermal infrared range is referred to be a greenhouse gas. The five main greenhouse gases in the atmosphere of Earth are ozone, carbon dioxide, methane, and water vapor.
In addition to being 300 times more powerful than carbon dioxide, nitrous oxide also thins out the ozone layer. Reducing it could have a quicker and more dramatic effect on global warming since it also has a shorter life cycle.
Agriculture, particularly fertilized soil and animal dung, is the main source of nitrous oxide, making it more difficult to control. "It is possible to consider limiting carbon dioxide, methane, and other substances. But nitrous oxide is mostly a problem with food production.
Therefore, the most likely lead to more n2o emissions is fertilization of agricultural fields.
To learn more about greenhouse gas from the given link.
https://brainly.com/question/20349818
#SPJ4
Which best describes hydrogen bonding?
Dipole-dipole interactions between molecules that do not include a covalent bond to a hydrogen atom are known as hydrogen bonds. The attraction between two incredibly electronegative atoms, such N, O, or F, and a hydrogen atom that is covalently bonded to one of them causes it to occur.
Any electronegative atom, such as oxygen, chlorine, or fluorine, may make up the other atom, whereas one of the atoms is hydrogen. Between molecules or between two different molecules, hydrogen bonds can develop between the atoms.
How to determine hydrogen bonding?
Determine whether hydrogen bonds are likely by looking at the molecule's Lewis structure. The electronegative atom needs one or more unshared electron pairs and a negative partial charge, much like oxygen and nitrogen do.
To know more about Hydrogen Bonding, visit:
https://brainly.com/question/15099999
#SPJ4
What do subscripts in an empirical formula indicate?; What is the symbol of empirical formula?; What is the purpose of a subscript in a molecular compound?; What does the subscript 2 indicate in br2?
If there is more than one atom of a specific kind, the number is written as a subscript following the atom. Molecular formula is the representation of the molecule to show the number of atoms.
Empirical formulas are normally used to represent substances with undetermined molecular structures or substances not made up of normal molecular entities. A molecular formula is a representation of a molecule that uses chemical symbols to indicate the types of atoms followed by subscripts to show the number of atoms of each type in the molecule. A subscript is used only when more than one atom of a given type is present. we use the symbol of the element and include the subscript "2" to indicate that two atoms of that element are joined together. It indicates two atoms of the element have joined together to form a molecule in br2.
To learn more about Molecular formula please visit:
https://brainly.com/question/26388921
#SPJ4
Which one is not true of a normal retina?
A. A central small pet called the optic disc is the visual location for the best color, shape, and movement discrimination.
B. It is richly supplied with blood vessels.
C. It has a blind spot.
D. It contains millions of photo receptor cells, but no chemo receptor cells.
Answer:
A. A central small pet called the optic disc is the visual location for the best color, shape, and movement discrimination.
Explanation:
The optic disc, also known as the optic nerve head, is not a "pet" and it is not a location for visual discrimination. It is a small, circular area at the center of the retina where the optic nerve and blood vessels enter and exit the eye. The optic disc does not contain any photo receptors, so it is a "blind spot" in the sense that it does not contribute to vision. However, the rest of the retina is richly supplied with photo receptors and is responsible for sensing light and providing visual information to the brain.
Temperature affects equilibrium in one direction or the other (depending on whether the system is exo or endothermic). Discuss.
Temperature is a factor that affects the equilibrium in a reaction, shifting to the right or left in endothermic or exothermic reactions if it increases or decreases.
The role of temperature in chemical reactionsWhen the temperature in a reaction system increases, an increase in the speed of the reaction is induced because there is an increase in kinetic energy in the molecules and they tend to collide with each other more frequently.
The relationship of temperature with the equilibrium and speed of a reaction is that it affects the kinetic energy of the molecules and this leads to an increase in the concentration of reactants or products by increasing the number of collisions between the molecules.
Therefore, temperature is considered as a catalyst reagent.
Effects of temperature on the endothermic reactionIn this type of reaction, if the temperature is increased, the equilibrium will shift to the right (more products, less reactants) and if it is decreased, to the left (more reactants, less products).
Effects of temperature on the exothermic reactionHere if the temperature is increased the equilibrium moves to the left (more reactants less products). If the temperature is lowered, the equilibrium will shift to the right (more less reactive products).
Learn more about the effects of temperature on a reaction at https://brainly.com/question/24118258
#SPJ4
Is centerfire ammunition used for muzzleloaders?; Which is better between centerfire and rimfire?; Whats the difference between centerfire and rimfire pistols?
No, centerfire ammunition is not used for muzzleloaders.
It is difficult to say which type of ammunition is better between centerfire and rimfire, as each type has its own advantages and disadvantages. Centerfire ammunition is usually more powerful and is better suited for long-range shooting, while rimfire ammunition is generally cheaper and quieter.
The main difference between centerfire and rimfire pistols is the way the primer is activated. Centerfire pistols use a primer that is located in the center of the base of the cartridge and is activated by a firing pin striking the primer. Rimfire pistols use a primer that is located around the rim of the cartridge and is activated by the firing pin crushing the primer.
For more questions like Muzzleloaders click the link below:
brainly.com/question/15098773
#SPJ4
complete the curved arrow pushing mechanism for the following michael (conjugate) addition reaction. add the missing bonds, nonbonding electron pairs, and curved arrows as needed.
Michael (conjugate) addition reaction is during conjugate addition, a nucleophile adds to the electrophilic β-alkene carbon to from a C-Nuc bond.
A conjugate addition with a carbanion as the nucleophile is known as the Michael reaction. For the mechanism of this type of process, look at the Michael addition of a simple enolate.
During a Michael reaction the enolate acts as a nucleophilic donor and the α, β-unsaturated carbonyl acts as the electrophilic acceptor. The mechanism is a mixture of an alpha-substitution for the enolate and a conjugate addition for the α, β-unsaturated carbonyl.
Learn more about Michael addition reaction here:- https://brainly.com/question/15878158
#SPJ4
Decide whether or not each of the following metals dissolves in 1 M HCl. For the metals that do dissolve, write a balanced redox reaction showing what happens when the metal dissolves. Identify all of the phases in your answer.
A. Zn
B. Co
C. Na
All the mentioned metals, that is zinc, cobalt and nickel react with hydrochloric acid.
The chemical reaction is as follows -
Zn + 2HCl -> [tex] ZnCl_{2}[/tex] + [tex] H_{2}[/tex]
Co + 2HCl -> [tex] CoCl_{2}[/tex] + [tex] H_{2}[/tex]
2Na + 2HCl -> 2NaCl + [tex] H_{2}[/tex]
In these balanced redox chemical reaction, reactants are Zinc, Cobalt, Sodium and Hydrochloric acid. The products are [tex] ZnCl_{2}[/tex] represents zinc chloride, [tex] CoCl_{2}[/tex] represents cobalt chloride, NaCl represents sodium chloride and [tex] H_{2}[/tex] hydrogen.
The metals in the above reactions are in solid phase and react to release the hydrogen gas. The salts are also in solid form. However, the reaction between cobalt and hydrochloric acid leads no visible reaction.
Learn more about chemical reactions -
https://brainly.com/question/11231920
#SPJ4
refer to the following gases contained in identical rigid cyliners under the conitions given int hetable below. the density of the gas in g/l is
gases contained in identical rigid cyliners under the conitions given int hetable below, the density of the gas in g/l is Greatest in container B.
Gas Density is defined as the amount for every volume of a substance under particular conditions of pressure and temperature. The gas's energy is equal to its mass mass by the volume. We by now know that density () = m/V. So, in equation, compare the value of (2). As a result, the ideal gas density formula is = PM/RT. Brass and aluminium densities will be calculated using mass and volume metrics. Volumes would be ascertained geometries (measuring lengths), by hydrodistillation, and by make possible to demonstrate the effects of accuracy on data.
Learn more about Gas Density here:
https://brainly.com/question/12022043
#SPJ4
The complete question is :
refer to the following gases contained in identical rigid cyliners under the conitions given int hetable below. the density of the gas in g/l is
Sixty-five liters of liquid ethanol at 70.0 derajat celcius and 55 L of liquid water at 20.0 derajat celcius are to be mixed in a well-insulated flask. The energy balance for this constant pressure process is Q=ΔH.
a) Neglecting evaporation and the heat of mixing, estimate the final mixture temperature. b) If the experiment were actually performed and the final mixture temperature were measured, it would almost certainly not equal the value estimated in Part (a). List as many reasons as you can to explain the observation. (there are at least seven of them, most involving approximations made in the estimation.)
The temperature that is required is 44.3 celcius in the Sixty-five liters of liquid ethanol at 70.0 celcius and 55 L of liquid water at 20.0.
Here we have the 75 L of ethanol;
789 * 1 mol /46.07 = 1284 mol of ethanol.Heat required = Q= 4H = mT1/T2Q =4U=4HT=44.3 celsius.Mixing the solution may have an effect on the very last temperature.Heat loss to the outdoor of the system (now no longer adiabatic)Evaporation of the drinks will have an effect on the very last temperature.Heat capability of water won't be constant.There wherein each systematic and random mistakess that came about at some stage in the test along with errors in size of temperatures and volume. It also can be the shortage of accuracy and precision of the researcher.Read more about water;
https://brainly.com/question/5060579
#SPJ4
Why did the periodic table change over time?; What are the most recent changes discoveries to the periodic table of elements?; Which is the most likely reason scientists update the periodic table?; When was the periodic table last updated and what elements were added?
To explain the behavior of chemicals, new findings and ideas are always being created. They are Nihonium, Moscovium, and Tennessine, respectively. Researchers find new elements.
An explanation of an element.An important part of the entire. In chemistry, the term refers to a straightforward chemical that cannot be broken down into smaller parts or changed into another substance. The fundamental units of an element are its atoms, which are composed of protons, neutrons, and electrons. Each atom of a given element contains a set number of protons.
What exactly does the word "elements" mean?If a substance has exactly the same number of protons in each of its atoms, or, to put it another way, if all of its atoms, then that substance is said to be an element.
To know more about Element visit:
https://brainly.com/question/13025901
#SPJ4
a chemical engineer must calculate the maximum safe operating temperature of a high-pressure gas reaction vessel. the vessel is a stainless-steel cylinder that measures
The maximum safe operating temperature that the engineer should recommend for this reaction is 590°C.
What is high-pressure gas reaction vessel?Chemical reaction vessel that can conduct a reaction under elevated pressure (that is greater than atmospheric pressure) is called high pressure reaction vessel.
As the reaction is to performed in the cylindrical vessel, so volume of the cylindrical vessel will be:
Volume of cylinder =π r² h
Given r is 17 cm and h is 20.4 cm
= 22.17 * 17² * 20.4
= 4.630 cm²
As we know that: PV = nRT
moles = weight/molecular weight
moles of boron trifluoride = 98.5/67.82
moles of boron trifluoride = 1.452 mol
PV = nRT
T = PV/nR
T = (22.21 * 4.630)/( 0.0826 * 1.452)
= 863 K
= 863 - 273°C
= 590°C
Temperature of the system is: 590°C
To know more about high-pressure gas reaction, refer
https://brainly.com/question/18404475
#SPJ4
Note: The question given on the portal is incomplete. Here is the complete question.
Question: A chemical engineer must calculate the maximum safe operating temperature of a high-pressure gas reaction vessel. The vessel is a stainless-steel cylinder that measures 17.0cm wide and 20.4cm high. The maximum safe pressure inside the vessel has been measured to be 2.20MPa. For a certain reaction the vessel may contain up to 0.0985kg of boron trifluoride gas. Calculate the maximum safe operating temperature the engineer should recommend for this reaction. Write your answer in degrees Celsius. Round your answer to significant digits.
what is the strongest base in each the following reactions? provide justification based on solution equilibrium or forces of attraction between particles.
The strongest base is H2O.
• Strong acids (HNO3) have poor CB and 100% dissociation.
NO3- is a weak base as a result.
As the reaction progresses, H2O acquires H+ ions the majority of the time as NO3- and H2O compete for them.
What is the solution described?Any combination of one or more solutes that have been dissolved in a solvent is referred to as a solution. To create a homogenous mixture, a solute must dissolve in a solvent. To create a homogenous mixture, a solute must dissolve in a solvent.
What are the answer and an example?A homogenous combination of two or more components with particles smaller than 1 nm is referred to as a solution. Salt and sugar solutions are typical illustrations of solutions.
To know more about Solution visit:
https://brainly.com/question/7932885
#SPJ4
Electrons added to atomic orbitals of the same energy will remain unpaired with parallel spins until the subshell is more than half-filled" is a statement of Select one: O a. Conservation of Energy O b. The Aufbau Principle O c. Hund's Rule O d. The Periodic Law
The correct option is (c) Hund's Rule.
Hund's rule: every orbital in a subshell is singly occupied with one electron before any one orbital is doubly occupied, and all electrons in singly occupied orbitals have the same spin.When assigning electrons to orbitals, an electron first seeks to fill all the orbitals with similar energy before pairing with another electron in a half-filled orbital. Atoms at ground states tend to have as many unpaired electrons as possible. In visualizing this process, consider how electrons exhibit the same behavior as the same poles on a magnet would if they came into contact; as the negatively charged electrons fill orbitals, they first try to get as far as possible from each other before having to pair up.Electrons are negatively charged and, as a result, they repel each other. Electrons tend to minimize repulsion by occupying their own orbitals, rather than sharing an orbital with another electron. Furthermore, quantum-mechanical calculations have shown that the electrons in singly occupied orbitals are less effectively screened or shielded from the nucleus.
Find more about Hund's Rule :-
brainly.com/question/11862607
#SPJ4
What determines the amount of products formed in a chemical reaction?; How are chemical equations used in stoichiometry?; What is the ratio of reactants and products in a chemical reaction called?; What makes stoichiometry a relationship between reactants and products?
The amount of products that are generated are based on the mass of the reactants in the reaction.
The ratio of reactants and products in a chemical reaction is called chemical stoichiometry.
The stoichiometric coefficients help us to establish the mole ratio between reactants and products.
What is stoichiometry?
Stoichiometry is based at the regulation of conservation of mass where the overall mass of the reactants equals the overall mass of the products, leading to the insight that the members of the family among quantities of reactants and products commonly form a ratio of wonderful integers. This means that if the amounts of the separate reactants are recognized, then the quantity of the product can be calculated. Conversely, if one reactant has a known quantity and the amount of the products may be empirically determined, then the quantity of the opposite reactants can also be calculated.To know more about stoichiometry, click the link given below:
https://brainly.com/question/28780091
#SPJ4
polymer powders are usually blended with to create a wide range of shades from white to jet black.
Polymer powders are usually blended with pigments and colorants to create a wide range of shades from white to jet black.
A polymer is a substance together with very large molecules referred to as macromolecules, composed of many repeating subunits. Due to their vast spectrum of homes, both synthetic and natural polymers play vital and ubiquitous roles in regular lifestyles.
Products made from polymers are all around us: garb made from synthetic fibers, polyethylene cups, fiberglass, nylon bearings, plastic bags, polymer-primarily based paints, epoxy glue, polyurethane foam cushion, silicone heart valves, and Teflon-covered cookware.
A number of the beneficial houses of diverse engineering polymers are excessive electricity or modulus-to-weight ratios, toughness, resilience, resistance to corrosion, lack of conductivity, color, transparency, processing, and coffee price.
Learn more about Polymer here:- https://brainly.com/question/1602388
#SPJ4
Which formula represents a molecular compound? A) Ar B) NaI C) N2O4 D) All of the above
The remaining product, N2O4 N 2 O 4, is a superb illustration of the a molecular compound because it is made entirely of non-metal components.
A molecular substance can be identified by its formula, but how?Typically, two or more non metallic components make up a molecular complex.Molecular compounds are termed using the stem of the first element's name plus the suffix -ide, followed by the second element.
An molecular compound example is what?Chemical substances known as molecules or discrete molecules are known as molecular compounds.Examples include common compounds like water (H2O) & carbon dioxide (CO2)
To know more about molecular compound visit:
https://brainly.com/question/23088724
#SPJ4
The half-life of carbon-14 is about 6000 ...
Therefore, in this instance, it will require 6000 years for 50% of the carbon-14 atoms in that specific substance to experience radioactive decay. If half of the atoms decay, half of the initial sample will still be present after one half-life.
What is Half Life?
One of an isotope's properties is whether or not it emits radioactive material. While certain isotopes are eternally stable, others are radioactive and undergo a distinctive sort of emission as they decay. The amount of the radioactive isotope will diminish with time as less and less of it is present. The half-life of radioactive decay is a fascinating and practical feature.
The half-life of a radioactive isotope is the amount of time it takes for one half of it to decay. The half-life of a particular radioactive isotope is not influenced by the environment and is not dependent on the isotope's initial concentration.
How long it will take for half of the atoms in an original sample to undergo radioactive decay is determined by an element's nuclear half-life.
The proportion of carbon-14 atoms will reach 25% of the original sample in another 6000 years, 12.5% in another 6000 years, and so on.
Learn more about Half Life from given link
https://brainly.com/question/1160651
#SPJ4
Calculate [OH -] given [H3O+] in each aqueous solution and classify the solution as acidic or basic a) [H3O+] = 1.3 x 10^-3 M b) [H3O+] = 9.1 x 10 ^-12 M c) [H3O+]= 5.2 x 10^-4 M d) [H3O]= 6.1 x 10 ^9 M
7.7*10^-12 Molar is [Hydroxide] when H3O+ is equal to 1.3 x 10^-3 M, 1.1*10^-3 M is [OH -] when H3O+ is equal to 9.1 x 10^-12 M, and 1.9*10^-11 M is [OH -] when H3O+ is equal to 5.2 x 10^-4 M.
For [H3O+] = 1.3 x 10-3 M, [OH -] equals 1.6*10-6 M. The chemical symbol for hydrogen is OH, making it a diatomic anion. It contains a negative electric charge and is made up of an oxygen and a hydrogen atom joined by a single covalent link.
[H3O+] = 1.3*10^-3 Molar
use:
[OH-] = Kw/[H3O+]
Kw is dissociation constant of water whose value is 1.0*10^-14 at 25 oC
[OH-] = (1.0*10^-14)/[H3O+]
[OH-] = (1.0*10^-14)/(1.3*10^-3)
[OH-] = 7.692*10^-12 M
7.7*10^-12 M
Given:
[H3O+] = 9.1*10^-12 M
[OH-] = Kw/[H3O+]
Kw is dissociation constant of water whose value is 1.0*10^-14 at 25 oC
[OH-] = (1.0*10^-14)/[H3O+]
[OH-] = (1.0*10^-14)/(9.1*10^-12)
[OH-] = 1.099*10^-3 M
1.1*10^-3 M
Given:
[H3O+] = 5.2*10^-4 M
use:
[OH-] = Kw/[H3O+]
Kw is dissociation constant of water whose value is 1.0*10^-14 at 25 oC
[OH-] = (1.0*10^-14)/[H3O+]
[OH-] = (1.0*10^-14)/(5.2*10^-4)
[OH-] = 1.923*10^-11 M
1.9*10^-11 M
[H3O+] = 6.1*10^-9 M
[OH-] = Kw/[H3O+]
Kw is dissociation constant of water whose value is 1.0*10^-14 at 25 oC
[OH-] = (1.0*10^-14)/[H3O+]
[OH-] = (1.0*10^-14)/(6.1*10^-9)
[OH-] = 1.639*10^-6 M
1.6*10^-6 M
Learn more about Hydroxide here
https://brainly.com/question/4251554
#SPJ4
A sample of an unknown compound is vaporized at 150.°C . The gas produced has a volume of 960.mL at a pressure of 1.00atm , and it weighs 0.941g . Assuming the gas behaves as an ideal gas under these conditions, calculate the molar mass of the compound. Round your answer to 3 significant digits.
The molar mass of the unknown compound that vaporizes at 150 °C is 34.81 g/mol
What is the molar mass of a compound?The molar mass of a chemical compound is defined as the mass of a sample of that compound divided by the number of moles in that sample. Its unit of measurement is grams per mole (g/mol) although in the International System of Measurements it should be kilograms per mole (kg/mol).
This is a property closely related to the relative molar mass of a compound and to the standard atomic masses of the constituent elements.
Determination of the molar mass of the unknown gasTo determine the molar mass of the gas, the ideal gas equation was used: PV = nrt, in which
P = Pressure
V = Volume
n = number of moles
R = Gas constant
t = temperature
But previously the moles of the gas are calculated
Calculate the moles of the unknown compoundData
t = 150°C = 423.15K
V = 960ml = 0.96L
P = 1.00 atm
R = 0.082 L Atm / mol °K .
n = ?
PV = nrt
n = PV/rt
n=1. 0.96 / 0.082. 423.15
n = 0.96 / 34.7
n = 0.027 mole
Calculation of the molar mass of the unknown compoundM = m/n
M = 0.94 g/ 0.027 mol
M = 34.81 g/mol
Learn more about molar mass at https://brainly.com/question/13152455
#SPJ4
draw the major product of this reaction. ignore inorganic byproducts and the phthalic acid side product
CH3CH2CH2CH2CI is the major product of this reaction ignore inorganic compound by products and the phthalic acid side product. In chemistry, inorganic compounds are usually compounds that do not have carbon-hydrogen bonds, i.e., are not organic compounds.
What is inorganic compound?
In chemistry, inorganic compounds are usually compounds that do not have carbon-hydrogen bonds, i.e., are not organic compounds.
Therefore, CH3CH2CH2CH2CI is the major product of this reaction ignore inorganic compound by products and the phthalic acid side product. In chemistry, inorganic compounds are usually compounds that do not have carbon-hydrogen bonds, i.e., are not organic compounds.
To learn more about inorganic compound refer the given link:-
https://brainly.com/question/2169750
#SPJ4
in both the structures shown, replacement of ha and hb, in turn, with an atom z will produce two different compounds that are diastereomers of each other. ha and hb are therefore diastereo -topic and will give nmr signals.
In both the structures shown, replacement of ha and hb, in turn, with an atom z will produce two different compounds that are diastereomers of each other. ha and hb are therefore diastereomer -topic and will give different or distinct nmr signals.
Stereoisomers that are not enantiomers or related as object and mirror images are known as stereoisomers. Diastereomers are not mirror images of one another and cannot be superimposed, in contrast to enantiomers which are. Diastereomers can differ in their reactivity and physical characteristics. They differ in their melting points, boiling points, and densities. There are at least two stereocenters there.
It is simple to mix up diasteromers with enantiomers. Three-bromo-2-butanol, for instance, has four steroisomers. SS, RR, SR, and RS are the four potential combinations (Figure 1). One of the molecules is both the diasteromer and the enantiomer of each of the other two molecules (SS is enantiomer of RR and diasteromer of RS and SR). SS's mirror.
Learn more about diastereomers here:
https://brainly.com/question/21506956
#SPJ4
Given a cylinder of fixed volume filled with 1 mol of argon gas, which of the following is correct? (Assume all gases obey the ideal gas law.) a) If the temperature of the cylinder is changed from 25 degree c to 50 degree c, the pressure inside the cylinder will double. b) A cylinder of identical volume filled with the same pressure of helium must contain more atoms of gas because He has a smaller atomic radius than argon. c) If a second mole of argon is added to the original cylinder, the pressure will be doubled. d) If the temperature of the cylinder is changed from 400K to 200 K, the pressure will be doubled. e) None of the above.
Given a cylinder of fixed volume filled with 1 mol of argon gas, assume all gases obey the ideal gas law, none of the statement are correct. (Option E)
The ideal gas law, also known as the general gas equation, refers to a state of a hypothetical ideal gas. It is a good behavioral approximation of many gases exhibit under many conditions, although it has several limitations. It was suggested by Benoît Paul Émile Clapeyron in 1834 as a combination of the empirical Boyle's law, Charles's law, Avogadro's law, and Gay-Lussac's law. The ideal gas law is often written in an empirical form:
pV = nRT
where p, V and T are the pressure, volume, and temperature; n is the amount of substance; and R is the ideal gas constant.
Based on the relationship between pressure, volume, and temperature given by the equation, none of the statements are true.
Learn more about Ideal gas law:
https://brainly.com/question/27870704
#SPJ4
What powder should I use for my muzzleloader?
The powder should I use for my muzzleloader is the black powder, the mixture of the charcoal , sulfur, and the saltpeter.
The powder should be used in the muzzleloader is the black powder. The black is the mixture of the charcoal , sulfur, and the saltpeter. the powder is specially used to reduce the the smoke cause in the muzzleloader. the rifles, the single shot piston , the revolvers etc are the examples of the muzzleloader. the muzzleloader is the firearm which is projectile to the propellant that is loaded from the muzzle gun.
The propellant used in the muzzleloader is the black powder only. so, the powder we should in the muzzleloader is the black powder.
To learn more about muzzleloader here
https://brainly.com/question/7327811
#SPJ4
A compound with a molecular formula C10H12O2 has the following HNMR spectrum. Which of the following structures is consistent with this spectrum?
The HNMR spectrum of a substance with the chemical formula C10H12O2 is shown below. This spectrum is compatible with the III structure.
A formyl functional group is created when a carbonyl is joined to hydrogen. When a formyl group is attached to a R group, the result is an aldehyde. Butyraldehyde, often known as butanal, is an organic compound with the formula CH3(CH2)2CHO. This chemical is a derivative of butane's aldehyde. It smells terrible and is a combustible, colourless liquid. You discover X, a brand-new chemical. Observed proton and lR NMR spectra reveal the chemical formula to be C9H120, and mass spectroscopy confirms this.
To learn more about spectrum click here https://brainly.com/question/6836691
#SPJ4
assign an oxidation state to each atom in each element, ion, or compound. drag the appropriate items to their respective bins.
The correct response is a) Ag. The oxidation number of an atom of a pure element is 0. The charge an atom would have if the compound were made up of ions is known as its oxidation number.
The oxidation state, often known as the oxidation number, in chemistry refers to the hypothetical charge that an atom would have if all of its links to other atoms were entirely ionic. It describes how much an atom has oxidized (lost electrons) in a chemical complex. The oxidation state can theoretically be positive, negative, or zero. Although nature does not include entirely ionic bonds, it does contain numerous strong ionic bonds, making the oxidation state a reasonable predictor of charge. The formal charge or any other genuine atomic attribute of an atom is not represented by the oxidation state of that atom. This is especially true for high oxidation states, where the amount of ionization energy needed to create a multiply positive ion is much more than the amount of energy available in chemical reactions. A compound's atoms' oxidation states can also change based on the electronegativity scale that was used to calculate them. An atom's oxidation state in a compound is thus just a formalization. Nevertheless, it is crucial to comprehend inorganic compound nomenclature rules. Additionally, a number of chemical reaction findings can be fundamentally described in terms of oxidation states.
Learn more about oxidation number here
https://brainly.com/question/27239694
#SPJ4
Assign oxidation states to each atom in each element, ion, or compound. a. Ag, b. Ag^+Ag+ c. CaF_2CaF 2 d. H_2SH2S e. CO_3 {2-}CO32− f. \mathrm{CrO}_{4}^{2-}CrO42−
