Answer:
Un diafragma es una pieza de silicona o de goma reutilizable que cubre el cuello del útero. El diafragma se coloca dentro de la vagina con espermicida antes de tener relaciones sexuales para prevenir un embarazo. El diafragma es un dispositivo anticonceptivo que impide que los espermatozoides ingresen en el útero.
A ball that has a mechanical energy of 65 J has 12 J of kinetic energy. The ball has
J of potential energy
Answer:
The ball has a potential energy of 53 J.
Explanation:
Mechanical energy, E = Kinetic energy + Potential energy
E = K.E + P.E
65 = 12 + P.E
P.E = 65 – 12
P.E = 53 J
Therefore the potential energy of the ball is 53 J
Answer:
53
Explanation:
on e2021
Generators?
A)take motion and induce a current
B)take motion and produce a magnetic field
C)take a current produce spin
D)take a magnetic field and produce spin
Answer:
A)take motion and induce a current
Explanation:
i hope it will be helpful
A force of 15N acts on an area of 60m².What is the pressure? *
Answer:
0.25p.a
Explanation:
force=15N area=60m²
so pressure =force/area =15N/60m²=0.25p.a
A block of amber is placed in water and a laser beam travels from the water through the amber. The angle of incidence is 35 degrees while the angle of refraction is 24 degrees. What is the index of refraction of amber?
(index of refraction of water is 1.33)
is there any machine that is 100% efficient? why?why not
Answer:
No, it's not there.
Explanation:
For a machine to be 100% efficient, it has to be with an output which is equal to its input. But machines have an out put less than an input, hence efficiency below 100%.
help me with this one
Answer:
may be d)45°
Explanation:
Highlight two factors which shows that heat from the sun does not reach the earth surface by convection
Answer:
Explanation:
The heat from the Sun gets to the surface of the Earth by radiation and not by convection because:
i. Radiation does not require material medium for its propagation: Since the space between the Sun and Earth is a vacuum ( i.e it is an empty space), then the only method for the heat from to Sun to get to the Earth is by radiation. This method does not require a material medium, while convection is a method that requires material medium for its propagation.
ii. Radiation occurs without heating the intervening medium: During the propagation of the heat from the Sun to the Earth, the space between the two heavenly bodies is not heated up. Some fraction of the heat after hitting the surface of the Earth get reflected back into the Earth's atmosphere. While in convection, the medium would have been heated up in the process.
A sample of Radon-222 has a half-life of 3.82 days. After 11.46 days, there is 5 grams of Radon-222 remaining. How much Radon-222 was in the original sample?
30 grams
2 grams
15 grams
40 grams
If there is 3.4 m3 of methane gas in a container with a pressure of 18.9 atm and the container expands until the methane has a pressure of 2.2 atm, what is the final volume of the methane? Temperature is constant at 305 K. A. 12.23 m3 B. 141.37 m3 C. 29.21 m3 OD. 2.53 m3
Answer:
C. 29.21 m³
Explanation:
Given the following data;
Initial volume, V1 = 3.4 m³Initial pressure, P1 = 18.9 atmFinal pressure, P2 = 2.2 atmTo find the final volume, we would use Boyle's law;
Boyles states that when the temperature of an ideal gas is kept constant, the pressure of the gas is inversely proportional to the volume occupied by the gas.
Mathematically, Boyles law is given by;
PV = K
[tex] P_{1}V_{1} = P_{2}V_{2} [/tex]
Making V2 the subject of formula, we have;
[tex] V_{2} = \frac {P_{1}V_{1}}{P_{2}} [/tex]
Substituting the values into the formula, we have;
[tex] V_{2} = \frac {18.9 * 3.4}{2.2} [/tex]
[tex] V_{2} = \frac {64.26}{2.2} [/tex]
Final volume, V2 = 29.21 m³
Un cuerpo tiene una rapidez inicial de 5 m/s y una aceleración de 6 m/s2 . Calcular la rapidez y la distancia recorrida durante los primeros 9 segundos del movimiento. Resolver el ejercicio por medio de tablas y gráficas y luego resolverlo por medio de las fórmulas de movimiento. POR FAVOR AYUDAAAA... ES PARA MAÑANA ;-;
Encontramos que la distancia recorrida en los primeros 9 segundos es 288 metros.
Los datos dados son:
El cuerpo tiene una rapidez inicial de 5 m/s
El cuerpo tiene una aceleración de 6 m/s^2
Queremos calcular la distancia recorrida durante los primeros 9 segundos de movimiento.
Lamentablemente no contamos con los gráficos ni las tablas, así que se procede a obtener las ecuaciones de movimiento.
La aceleración será:
a(t) = 6m/s^2
Para la ecuación de la velocidad tenemos que integrar la ecuación de arriba, obteniendo:
v(t) = (6m/s^2)*t + v0
Donde v0 es la rapidez inicial, que conocemos es igual a 5 m/s, así tenemos:
v(t) = (6m/s^2)*t + 5m/s
Para la ecuación de la posición debemos integrar nuevamente, así obtendremos:
p(t) = (1/2)*(6m/s^2)*t^2 + (5m/s)*t + p0
Donde la p0 es la posición inicial, la cual podemos definir como p0 = 0m
p(t) = (3m/s^2)*t^2 + (5m/s)*t
Para encontrar la distancia recorrida en los primeros 9 segundos, simplemente debemos remplazar t por 9s en la ecuación de posición:
p(9s) = (3m/s^2)*(9s)^2 + (5m/s)*9s = 288 m
Si querés aprender más sobre ecuaciones de movimiento, podés leer:
https://brainly.com/question/17123407
Which type of wires (copper, aluminum, or string) are ferromagnetic metals?
Answer:
Copper isn't ferromagnetic,
Aluminum isn't ferromagnetic,
String has a ferromagnetic property
So in conclusion:
The answer is strings :)
what is required for force to come into play
Answer:
An interaction of one object with another object results in a force between the two objects. Thus, at-least two objects must interact for a force to come into play.
Which does not affect the gravitational potential energy of an object? mass height speed acceleration due to gravity
Answer:
Speed
Explanation:
The answer is speed. It doesn’t affect potential energy because it’s associated with position. But since kinetic energy is associated with motion speed affects it.
Solar energy is a clean, renewable energy source. It is expensive to build a solar plant, but there is no fuel cost only maintenance. Why does solar energy not play a bigger role in energy production today?
Answer:
Energy production requires the setting up of a complete interconnected chain from generation of energy from the root source of the energy to the storage of the generated energy and the eventual utilization of the energy when required
Solar energy, indirectly, continues to be the main source of energy, however, the direct use of solar energy to power the systems we use in our everyday life, require the development of technologies, such as high efficiency solar cells, means of energy storage, and compatible efficient energy usage which are industrial areas that are seeing good progress but in which the current developed equipment are expensive to produce, and due to their efficiency, are undergoing further research and development
Therefore, due to the continuous increasing improvement in solar technology which can observed, the use of the produced energy through solar is evolving, and therefore, will continue to play a continuously increasing but lower role compared to other sources of energy which have been developed to satisfactory level that can drive an industry, considering the financial investment involved
Explanation:
A car is running uniformly with the velocity of 72km/h3, what is its acceleration?
Answer: a =0
Explanation:
What is the electric potential of a 4.5x10^-5 C charge that has an electric potential energy of 0.027 J?
Answer:
600 volts
Explanation: just do 4.5x10^-5c lol i hope this helps if it dont im so sorry
Define measurement with examples.
Explanation:
Measurement is defined as the act of measuring or the size of something. An example of measurement means the use of a ruler to determine the length of a piece of paper. An example of measurement is 15" by 25". ... The dimension, quantity, or capacity determined by measuring.
Measurement refers to the comparison of unknown physical quantity with a known quantity.
for eg. measurement of body while sewing clothes.......
Assuming Faraday constant to be 96500c/mol and relative atomic mass of copper 63,calculate the mass of copper liberated by 2A current in 5min.ans 0.196gm
Answer: The mass of copper liberated is 0.196 g.
Explanation:
The oxidation half-reaction of copper follows:
[tex]Cu\rightarrow Cu^{2+}+2e^-[/tex]
Calculating the theoretical mass deposited by using Faraday's law, which is:
[tex]m=\frac{M\times I\times t(s)}{n\times F}[/tex] ......(1)
where,
m = actual mass deposited = ? g
M = molar mass of metal = 63 g/mol
I = average current = 2 A
t = time period in seconds = 5 min = 300 s (Conversion factor: 1 min = 60 sec)
n = number of electrons exchanged = 2
F = Faraday's constant = 96500 C/mol
Putting values in equation 1, we get:
[tex]m=\frac{63 g/mol\times 2A\times 300s}{2\times 96500 C/mol}\\\\m=0.196g[/tex]
Hence, the mass of copper liberated is 0.196 g.
The capacity of an RD bottle is 100 cc and its mass is 45 g. Find the mass of the bottle when it is filled with a liquid of density 600 kg/m3.
Answer:
The capacity of an RD bottle is 100cc and its mass is 45g. Find the mass of the bottle when it is filled with a liquid of density 600kg/[tex]m^{3}[/tex]
EXPLANATION:
100cc=100[tex]cm^{3}[/tex]
density of liquid=600Kg/ =0.6gm/
so mass of 100cc liquid will be m=d×V=0.6×100=60gm
So mass of bottle filled with liquid will be bottle+liquid=45gm+60gm=105gm
Answer is 105gm.
Quả bóng 200g chuyển động với v 4m/s đập vào tường rồi bật ra ngược chiều với cùng tốc độ độ biến thiên động lượng của quả bóng là
People who get population education are also aware of health issues and environment education justify
HELP ASAP!!!
What size object (impactor) may create such a crater?
Answer:
I HOPE IT WILL HELP YOU.
:D
A magnet falls through a loop of wire with the south pole entering first. After it has fallen all the way through the wire loop so that the north pole end is moving away from the loop, what is the direction of the induced current in the loop (as viewed from above, looking down on the magnet)
Answer:
The induced current direction as viewed is clockwise
Explanation:
Lenz's Law states that the induced e. m. f. causes current to be driven in the loop of wire in such a way as to generate magnetic field that are oppose the magnetic flux change which is the source of the induced current
Therefore, as the magnet approaches the coil with the south pole, the coil produces current equivalent to the upward movement of the south pole of a permanent magnet through it which according to Flemings Right Hand Rule is clockwise
Therefore;
The direction of the induced current in the loop (as viewed from above, looking down the magnet) is clockwise
I NEED HELP ASAP!!!
What is the average speed shown on the graph between point A and point D?
Answer:
5/3 m/s or
6 km/h
Explanation:
really ? the average speed is just the straight connection in the graph from A to D.
that means the travel time was 40-10 seconds = 30 seconds.
and the distance traveled was 60-10 = 50 meters.
so, the average speed was
50 meters / 30 seconds
to bring this to standard m/s
5 m / 3 s = 5/3 m/s
or to standard km/h
an hour has 60 minutes or 120 30-seconds intervals
50 m/ 30 s × 120/120 = 6000 m / h = 6 km/h
When n resistance each of value x are connected parallel then resultant resistance x. When these n resistor connected in series. Total resistance
Answer:
Explanation:
Suppose you have 3 resistors each with a value of 3. If you placed them in parallel, would you get 3
1/3 + 1/3 + 1/3 = 1/r
The denominator doesn't change. So add the numerators.
(1 + 1 + 1)/3 = 3/3 = 1
So the question is faulty.
1 = 1/r
1*r = 1
r = 1/1
r = 1
The refractive index of glass is 1.52
and that of air is 1.00. Draw a labelled diagram to show how a light ray bends when it travels from glass to air.
Explanation:
..upper side is glass ..
The unit of work in terms of Newton and metre is _______
Answer:
Joule
Explanation:
the unit of work is Joule determined by the letter J.
Answer:
JouleExplanation:
Joule is defined as the work done by a force of one newton causing a displacement of one meter. Sometimes, newton-metre (N-m) is also used for measuring work.
Con lắc lò xo có độ cứng k = 100N/m được gắn vật có khối lượng m=0.1kg, kéo vật ra khỏi vị trí cân bằng 1 đoạn 5cm rồi buông tay cho vật dao động. Tính vmax vật có thể đạt được
Answer:
The maximum velocity is 1.58 m/s.
Explanation:
A spring pendulum with stiffness k = 100N/m is attached to an object of mass m = 0.1kg, pulls the object out of the equilibrium position by a distance of 5cm, and then lets go of the hand for the oscillating object. Calculate the achievable vmax.
Spring constant, K = 100 N/m
mass, m = 0.1 kg
Amplitude, A = 5 cm = 0.05 m
Let the angular frequency is w.
[tex]w = \sqrt{K}{m}\\\\w = \sqrt{100}{0.1}\\\\w = 31.6 rad/s[/tex]
The maximum velocity is
[tex]v_{max} = w A\\\\v_{max} = 31.6\times 0.05 = 1.58 m/s[/tex]
Draw a wave that has a wavelength of 3 cm and an amplitude of 1 cm. Label the wavelength, the amplitude, the rest position, and the crest and trough of your wave.
Answer:
Please find attached, the required wave drawn with MS Excel
Explanation:
Functions that represent waves is given as follows
A general form of the wave equation is A·sin(B·x) + D
Where;
B = 2·π/T
T = The period of the wave = 1/f
D = The vertical shift of the wave = 0
A = The amplitude of the wave = 1 for sine wave
v = The wave velocity
λ = The wavelength of the wave
f = The frequency of the wave
v = f·λ
At constant v, λ ∝ 1/f
∴ λ ∝ T
Where T = 3, we have;
B = 2·π/T
∴ B = 2·π/3
Therefore, we have the wave with an amplitude of 1 cm, and wavelength, 3 cm, given as follows
y = sin((2·π/3)·x)
Plotting the above wave with MS Excel, we can get the attached wave
if a person buys 10 kg apples in himalayan region and sells in terai region will he get profit or loss. why?
Answer:
he will be in profit
Explanation:
Himalayan region are high above the sea level so the gravity will be less there compared to the Terai region
Terai lies way below he Himalayan region so the pull of gravity will be more compared to Himalayan region
that's why he will be in profit but not loss
