Compared to the earth, the moon is no longer geologically active because.

When a soap bubble is illuminated perpendicularly with sunlight, the wavelength of visible light that will be absent in the reflected light depends on the thickness of the soap film.

In general, when light reflects off a thin film, interference occurs between the light waves reflecting off the front and back surfaces of the film. If the thickness of the film is an integer multiple of half the wavelength of a particular color of light, destructive interference occurs for that color and it is absent in the reflected light.

Assuming the index of refraction of the soap film is 1.33, the thickness of the film necessary for destructive interference of a particular color can be calculated using the equation t = (m + 1/2)λ/n.

Where t is the thickness of the film, m is an integer representing the number of half-wavelengths in the film, λ is the wavelength of the color, and n is the index of refraction of the film.

To determine which color of visible light will be absent in the reflected light, we would need to know the thickness of the soap film.

To know more about wavelength, refer here:

https://brainly.com/question/13047641?referrer=searchResults

#SPJ11

the distance to the star is 2 parsecs.

The distance to a star can be calculated from its parallax angle using the formula:

distance (in parsecs) = 1 / parallax angle (in arcseconds)

If the parallax angle of a star is measured to be 0.5 arcseconds, the distance to the star can be calculated as:

distance = 1 / 0.5 = 2 parsecs

what is star?

A star is a massive, luminous ball of gas that is held together by its own gravity and emits energy, including light, in the form of radiation. Stars are the basic building blocks of galaxies, and they are responsible for most of the visible light and heat in the universe.

To learn more about galaxies visit:

brainly.com/question/31361315

#SPJ11

Answer:

Yuri A. Gagarin

Explanation:

Answer: Yuri A. Gagarin

Explanation:

Sputnik 1 was the first human-made object to achieve orbital spaceflight. It was launched on 4 October 1957 by the Soviet Union. Vostok 1, launched by the Soviet Union on 12 April 1961, carrying Yuri Gagarin, was the first successful human spaceflight to reach Earth orbit.

He made a 108-minute orbital flight in his Vostok 1 spacecraft. He was a Soviet pilot and cosmonaut who became the first human to journey into outer space. He was 27 years old at the time of the flight.

Links for further understanding,

https://brainly.in/question/53159876

False. A concave lens refracts parallel rays in such a way that they are bent towards the axis of the lens, making it a converging lens.

A concave lens is a lens that has a curved surface that is curved inward, like the inside of a bowl. It is also known as a negative or diverging lens. Light that passes through a concave lens is spread out, or diverged, which causes the image to appear smaller than the actual object. Concave lenses are commonly used in eyeglasses and are used to correct nearsightedness, or myopia. They can also be used in projectors and cameras to focus light and create a sharper image.

To learn more about concave lens
https://brainly.com/question/29074128
#SPJ4

The ratio of the magnetic field in the interior of 2 to that in the interior of 1 is: 4.

Magnetic field is an invisible force field created by the movement of electric charges. It is a physical quantity that describes the magnetic force between objects. The strength of the magnetic field is measured in units of Tesla (T). Magnetic fields surround magnets and are also generated by electric currents, such as those used in motors and generators. Magnetic fields can interact with other magnetic fields and with moving electric charges, such as electrons, to produce forces.

The magnetic field in the interior of a solenoid is proportional to the number of turns per unit length and inversely proportional to the radius of the solenoid. Since solenoid 2 has 6 times the number of turns per unit length and half the radius of solenoid 1, the ratio of the magnetic field in the interior of solenoid 2 to the magnetic field in the interior of solenoid 1 is 4.

So, B is the correct answer.

To learn more about magnetic field

https://brainly.com/question/26257705

#SPJ4

According to the question of force, the correct answer of the question isTrue.

Force is a physical quantity that can be described as a push or pull on an object resulting from its interaction with another object. It is measured in SI unit of Newtons (N). Force can cause an object with mass to change its velocity, i.e., to accelerate, or a fixed object to experience a strain. Forces always come in pairs and they can either be attractive or repulsive. Examples of forces include gravity, the force of a magnet on objects, friction, electrical forces, and the force of a spring. All forces act on objects in the same way, regardless of their mass or composition.

The 250.0 g snowball of radius 4.00 cm will roll down the section angled at 30.0 degrees to the horizontal and reach the flat section of roof that is 2.00 m lower than the peak, as long as there is no external force acting on the snowball.

To learn more about force
https://brainly.com/question/12785175
#SPJ4

When the rest of the container is filled with water, the mercury will sink to the bottom due to its higher density compared to water. The steel will also sink to the bottom as it is denser than water but less dense than mercury.

The mercury and water will not mix as they are immiscible, meaning they do not form a homogeneous mixture. Instead, the mercury will form a separate layer at the bottom of the container, with the water occupying the rest of the space above it. It is important to note that mercury is a toxic substance and should be handled with care to avoid any harm to human health and the environment.

the rest of a container is filled with water, given that mercury and steel are present and both are denser than water, and mercury and water do not mix.

When the rest of the container is filled with water, the mercury, being denser than both water and steel, will sink to the bottom of the container. The steel, being denser than water but less dense than mercury, will float on top of the mercury layer.

Finally, the water, being the least dense, will form a layer on top of the steel. In summary, the container will have three distinct layers: mercury at the bottom, steel in the middle, and water on top.

Learn more about mercury

brainly.com/question/4025230

#SPJ11

In mountain belts, it is common to find sedimentary deposits more than 15 kilometers thick.

The craton in the central United States has a layer of sedimentary materials that is 1 to 2 kilometers thick.

However, in mountain belts, the deposits are thicker due to the effects of tectonic activity and orogeny, leading to a greater accumulation of sediments.

Summary: While the central U.S. craton has sedimentary layers 1-2 km thick, in mountain belts, these deposits can be over 15 km thick due to tectonic activity.

Learn more about  tectonic activity click here:

https://brainly.com/question/2325633

#SPJ11

The change in kinetic energy is 60.76 J.

The work done by the applied force is:

W = Fd cos(theta)

where F is the applied force, d is the distance moved, and theta is the angle between the force and the displacement. In this case, the force is horizontal and the displacement is also horizontal, so theta = 0 degrees and cos(theta) = 1.

W = (10 N)(10 m)(1) = 100 J

The work done by friction is:

W_friction = -f_k * N * d

where f_k is the coefficient of kinetic friction, N is the normal force, and d is the distance moved. The normal force is equal to the weight of the object, which is mg = (2 kg)(9.81 m/s^2) = 19.62 N.

W_friction = -(0.20)(19.62 N)(10 m) = -39.24 J

The net work done on the object is the sum of the work done by the applied force and the work done by friction:

W_net = W + W_friction = 100 J - 39.24 J = 60.76 J

The change in kinetic energy is equal to the net work done:

ΔK = W_net = 60.76 J

Therefore, the change in kinetic energy is 60.76 J.

To know more about kinetic energy please visit

https://brainly.com/question/31839790

#SPJ11

According to the statement the efficiency of the engine is 21.24% when operating at three-fifths maximum efficiency.

To find the efficiency of the engine, we can use the formula for the Carnot cycle, which relates the hot and cold reservoir temperatures to the maximum theoretical efficiency of the engine.
The Carnot efficiency formula is:
Efficiency = (1 - Tc/Th)
Where Tc is the temperature of the cold reservoir and Th is the temperature of the hot reservoir.
Plugging in the values given in the problem, we get:
Efficiency = (1 - 622/964) = 0.354 or 35.4%
However, the problem states that the engine is operating at three-fifths (or 60%) of the maximum efficiency, so we need to multiply our calculated efficiency by 60%.
Efficiency = 0.354 * 0.6 = 0.2124 or 21.24%
Therefore, the efficiency of the engine is 21.24% when operating at three-fifths maximum efficiency.
In conclusion, the efficiency of the engine can be determined using the Carnot efficiency formula, and adjusting for the given operating efficiency to find the final answer.

To know more about efficiency visit :

https://brainly.com/question/14835798

#SPJ11

The heat given off by the combustion of fossil fuels help produce electrical energy is (B) Thermal energy vaporizes water that spins turbines.

When fossil fuels like coal or natural gas are burned, heat is released into the air, which is used to heat water and create steam. The steam is then used to power turbines, which are linked to electricity-generating generators. The most popular way to generate energy from fossil fuels is through a process called thermal power generation.

Therefore, the correct option is (B).

To know more about energy

https://brainly.com/question/1285005

#SPJ1

The factors that determine the flow resistance as fluid moves through a vessel are: Viscosity of the fluid, Length of the vessel and Radius of the vessel.

The flow resistance of a vessel depends on the three factors mentioned: viscosity of the fluid, length of the vessel, and radius of the vessel.

Viscosity of the fluid is a measure of how resistant the fluid is to flow. The higher the viscosity, the more difficult it is for the fluid to move through the vessel, resulting in greater flow resistance.

The length of the vessel refers to the distance the fluid must travel through the vessel. A longer vessel creates more resistance to flow than a shorter one, resulting in greater flow resistance.

The radius of the vessel refers to the size of the vessel. A smaller radius vessel creates more resistance to flow than a larger one, resulting in greater flow resistance. This is due to the fact that as the radius of the vessel decreases, the amount of fluid in contact with the vessel wall increases, creating more frictional forces and thus greater resistance to flow.

To know more about flow resistance,

https://brainly.com/question/31275753

#SPJ11

However, dark regions at the centers of galaxies are not necessarily indicative of black holes, as they may also be caused by dust or other obscuring material.

Black holes that are stellar remnants can be found by searching for variable x-ray sources. As matter falls into a black hole, it releases a tremendous amount of energy in the form of radiation, including x-rays. Therefore, black holes that are actively feeding on nearby matter can be detected as variable x-ray sources. However, black holes that are not actively accreting matter can be difficult to detect. They may be inferred by their gravitational influence on nearby objects or by their effect on the motion of stars in a galaxy. They may also be found by searching for extremely luminous infrared objects or objects that emit very faint radio emission, as these can be indicative of the presence of a black hole. However, dark regions at the centers of galaxies are not necessarily indicative of black holes, as they may also be caused by dust or other obscuring material.

To know more about black holes visit:

https://brainly.com/question/31869219

#SPJ11

The magnetic field intensity at point P due to an infinite strip of metal carrying a current i can be calculated using the Biot-Savart law. The magnetic field is directly proportional to the current and width of the strip, and inversely proportional to the distance between the strip and the point P.

To find the intensity of the magnetic field at point P located at a distance d directly above the center line of the strip, we can use the Biot-Savart law. The law states that the magnetic field at a point due to a current-carrying conductor is proportional to the current, the length of the conductor, and the sine of the angle between the conductor and the line joining the point to the conductor.

Considering the infinite strip of metal with current i, we can assume that the current is uniformly distributed across the width of the strip, and the magnetic field lines are parallel to the center line of the strip. Therefore, we can assume that the magnetic field at point P is perpendicular to the plane of the strip.

Let's consider a small segment of the strip of width dx at a distance x from the centerline. The current through this segment is given by i*dx/w. The magnetic field at point P due to this segment is given by:

[tex]$dB = \frac{\mu_0}{4\pi} \cdot \frac{i\cdot dx}{w} \cdot \frac{\sin\theta}{d}$[/tex]

where μ0 is the permeability of free space, θ is the angle between the segment and the line joining the segment to point P, and d is the distance between the segment and point P.

Since the magnetic field is perpendicular to the plane of the strip, the angle θ is 90 degrees. Therefore, sinθ = 1, and the expression simplifies to:

[tex]$dB = \frac{\mu_0}{4\pi} \cdot \frac{i\cdot dx}{wd}$[/tex]

The total magnetic field at point P due to the entire strip is the sum of the magnetic field contributions from all the small segments of width dx:

[tex]$B = \int_{-\frac{w}{2}}^{\frac{w}{2}} dB = \frac{\mu_0}{4\pi} \cdot \frac{i}{wd} \int_{-\frac{w}{2}}^{\frac{w}{2}} dx = \frac{\mu_0}{4\pi} \cdot \frac{i}{wd} \cdot w$[/tex]

Hence, the intensity of the magnetic field at point P located at a distance d directly above the center line of the strip is given by:

[tex]$B = \frac{\mu_0}{4\pi} \cdot \frac{i}{wd} \cdot w$[/tex]

This equation shows that the magnetic field is directly proportional to the current i, the width of the strip w, and inversely proportional to the distance d between the strip and point P.

To learn more about Biot-Savart law

https://brainly.com/question/30764718

#SPJ4

The change in length of the steel bridge due to a temperature change from -20°C to 40°C is 0.55 m.

Temperature is a physical property of matter that quantitatively expresses the common notions of hot and cold. It is the measure of the average kinetic energy of the particles in a system, such as atoms or molecules. Temperature is measured with thermometers, which usually use the Celsius scale, with the freezing point of water set at 0°C and the boiling point of water set at 100°C. Other temperature scales are also used, such as the Fahrenheit and Kelvin scales.

Change in Length = Original Length x Coefficient of Linear Expansion x (Change in Temperature).

Therefore, the change in length of the steel bridge due to a temperature change from -20°C to 40°C is calculated as follows:

Change in Length = 1000 m x 11 x 10-6 K-1 x (40°C - (-20°C))

Change in Length = 1000 m x 11 x 10-6 K-1 x (60°C)

Change in Length = 0.55 m

Therefore, the answer is C) 0.55 m.

To learn more about temperature
https://brainly.com/question/27944554
#SPJ4

The idea that our universe could have been created by aliens in a lab is a hypothesis that has been proposed by some scientists and philosophers.

This idea is known as the "simulation hypothesis" or the "simulation theory," and it suggests that our reality is a computer-generated simulation created by an advanced civilization.

Proponents of this hypothesis argue that the rapid advancement of computer technology and the exponential growth of computing power could make it possible for an advanced civilization to simulate an entire universe. They also point out that the laws of physics and the fundamental constants of the universe seem to be finely tuned for life, which could be an indication that our universe was designed by an intelligent entity.

However, this idea is still a matter of speculation and debate, and there is currently no scientific evidence to support the claim that our universe was created by aliens in a lab. While it is interesting to consider the possibility, it is important to rely on scientific evidence and the scientific method to explore and understand the workings of the universe.

To learn more about matter visit:

brainly.com/question/29232090

#SPJ11

The equation for the displacement of a spring-mass system is given by x = A cos(ωt + φ), where A is the amplitude, ω is the angular frequency, t is time, and φ is the phase angle. We know that the angular frequency is π rad/s and that the mass is at a displacement of 4 cm at 1 second.

At t = 1 second, we have x = 4 cm and t = 1 second. Plugging these values into the equation, we get:

4 cm = A cos(π + φ)

We also know that we are starting to measure time at maximum displacement, which means that at t = 0, x = A. This means that cos(φ) = 1,

which simplifies our equation to:

4 cm = A cos(π)

cos(π) = -1, so we have:

4 cm = -A

Solving for A, we get:

A = -4 cm

However, we know that the amplitude must be a positive value, so we take the absolute value of A:

|A| = 4 cm

Therefore, the magnitude of the amplitude of the spring-mass system is 4 cm.

The answer is c. 4 cm.

To know more about spring-mass please visit...

brainly.com/question/31587396

#SPJ11

When the cart is at rest, the spring is in equilibrium and exerts no net force on the cart. This means that the net force on the cart is zero and the acceleration of the cart is also zero.

Equilibrium is a state of balance or stability within a system. It occurs when opposing forces or influences are equal in strength, so that no change occurs. In economics, equilibrium is the state of a market where the demand for goods and services is equal to the supply of those goods and services, and prices remain stable. Equilibrium can also refer to a state of balance in a person's physical, mental, or emotional state.

If the cart is displaced from its equilibrium position, then the spring exerts a force on the cart in the direction of its equilibrium position. This force is proportional to the displacement (x) from the equilibrium position. The magnitude of this force is given by F = kx, where k is the spring constant. This force causes the cart to accelerate in the direction of the equilibrium position. The acceleration of the cart is given by a = F/m0, where m0 is the mass of the cart. Therefore, the acceleration of the cart is given by a = kx/m0.

To learn more about equilibrium
https://brainly.com/question/517289
#SPJ4

Complete Question:

a cart of mass m0 can roll on frictionless bearings on a horizontal track. the cart is connected to a spring of force constant k. the point where the spring attaches to the cart is point p, which is directly above the location x=0. the cart is initially at rest at the position x=0.

The potential difference between Point B and Point C (Vbc), multiplied by the magnitude of the charge (q). Therefore, Wbc = qVbc.

Magnitude is a measure of the size or intensity of a physical quantity. It is a numerical value that describes the relative strength or size of a phenomenon, such as an earthquake, hurricane, or other natural event, relative to a reference value. Magnitude is also used to describe the brightness of a star or other celestial body. Magnitude is usually expressed as a number on a logarithmic scale, such as the Richter scale for earthquakes, or the magnitude scale for stellar brightness.

The positive charge will move towards the negative plate of the capacitor, since it is attracted by the negative charge on the plate.
The work done by the electrostatic force in moving the positive charge from Point B to Point C (Wbc) is equal to the potential difference between Point B and Point C (Vbc), multiplied by the magnitude of the charge (q). Therefore, Wbc = qVbc.

To learn more about magnitude
https://brainly.com/question/24256733
#SPJ4

c. Two times larger than. The energy transported by a wave is proportional to the square of its amplitude, so wave B with an amplitude of 0.2 cm has four times the energy of wave A with an amplitude of 0.1 cm.

Therefore, the energy transported by wave B is two times larger than the energy transported by wave A.

Your answer: d. four times larger than

Two waves are traveling through a container of an inert gas. Wave A has an amplitude of 0.1 cm, and Wave B has an amplitude of 0.2 cm. The energy transported by wave B must be four times larger than the energy transported by wave A.

To know more about transported please visit...

brainly.in/question/9560305?

#SPJ11

The unit of measure that represents frequency and is expressed as the number of cycles per second is Hertz (Hz).

Hertz is a derived unit of measure that is used to quantify the frequency of vibrations, waves, and oscillations. It represents the number of cycles of a wave that occur in one second. For example, if a sound wave completes 440 cycles in one second, it is said to have a frequency of 440 Hz. The Hertz unit is named after the German physicist Heinrich Hertz who first demonstrated the existence of radio waves.

learn more about Hertz

https://brainly.com/question/28178048

#SPJ11

K ⇒ GMm/2r is the kinetic energy k of a satellite with mass m in a circular orbit with radius r

Define kinetic energy

The energy of motion, or kinetic energy, can be seen in the movement of an item or subatomic particle. Kinetic energy is present in every moving object and particle. Kinetic energy is present when something moves, such as a person walking, a baseball soaring through the air, a piece of food dropping from a table, or a charged particle in an electric field.

Any particle of matter in the universe will gravitate toward any other with a force that varies directly as the product of the masses and inversely as the square of the distance between them, according to Newton's law of gravitation.

K ⇒ 1/2mv^2

v^2 ⇒GM/r

K ⇒ GMm/2r

To learn more about kinetic energy use:

https://brainly.com/question/8101588

#SPJ4

If the mass of an object is halved and its speed doubled, its momentum will Remain the same.

Momentum is a physical concept that describes the motion of an object. It is a measure of an object's inertia, or its resistance to a change in its velocity. Momentum is a vector quantity, meaning it has both magnitude and direction. The momentum of an object is equal to its mass multiplied by its velocity. Momentum is conserved in closed systems, meaning that the total momentum of a system remains constant unless an external force acts on it. This means that objects in motion will tend to stay in motion and objects at rest will tend to stay at rest unless acted upon by an external force. Momentum is an important concept in Newtonian mechanics, and it is used to describe the motion of objects in a wide range of situations.

To learn more about momentum

https://brainly.com/question/18798405

#SPJ4

According to the question of logistic growth, the number of plants after 3 months is 129.9 plants.

Logistic growth is a type of population growth model that follows a sigmoidal curve, often referred to as the logistic curve, which is a shape that is S-shaped and has two asymptotes.

The logistic growth model is given by the equation P(t) = K/(1 + Ae^(-rt)), where P(t) is the population at time t, K is the carrying capacity, and A and r are parameters.

In this case, the carrying capacity is 150 plants since the yard can only sustain 150 plants. We can estimate the parameters A and r by using the initial condition P(0) = 24 plants and the rate of growth of 85% per month.

Letting P(1) = 24(1.85) = 44.4 plants, we can solve for A and r by plugging in the values into the logistic growth equation. Solving for A and r gives us A = 0.0463 and r = 0.1745.

Therefore, the logistic growth equation for this case is P(t) = 150/(1 + 0.0463e^(-0.1745t)), and the number of plants after 3 months is P(3) = 150/(1 + 0.0463e^(-0.1745×3)) = 129.9 plants.

To learn more about logistic growth

https://brainly.com/question/6977250

#SPJ4

The acceleration a1 of the block when it passes through its equilibrium position can be expressed as: a1 = -a (m/k) where a is the amplitude of the oscillation, m is the mass of the block, and k is the spring constant.


When the block passes through its equilibrium position, the net force acting on it is zero.

At this point, the spring force and the gravitational force cancel each other out. Therefore, the acceleration of the block is also zero at this point.
However, as the block moves away from the equilibrium position, the spring force begins to dominate over the gravitational force and causes the block to accelerate towards the equilibrium position.

The acceleration is directly proportional to the displacement from the equilibrium position and is given by a = -kx/m, where x is the displacement.
When the block reaches the maximum displacement (amplitude) a, the spring force is at its maximum and the gravitational force is negligible. At this point, the acceleration is given by a = -a (m/k).
In conclusion, the acceleration of the block when it passes through its equilibrium position is zero. However, as it moves away from the equilibrium position, the acceleration is given by a = -a (m/k). This expression shows that the acceleration is directly proportional to the amplitude of oscillation, inversely proportional to the mass of the block, and inversely proportional to the spring constant.

For ore information on acceleration kindly visit to

https://brainly.com/question/29369440

#SPJ11

The distributed load w can be calculated using the following equation therefore, w is 6.283 lb/in.

Diameter is a straight line passing through the center of a circle, or any two points on a curve that are equidistant from its center. It is a measurement of distance, typically expressed in units of length such as inches or centimeters. The diameter of a circle can be found by dividing its circumference (the measurement of the length around the circle) by pi, or 3.14. The diameter of a circle is also its longest chord (straight line connecting two points on the circle).

If the wire has a diameter of 0. 2 in. , the distributed load w is 6.283 lb/in if the end b is displaced 0. 25 in.
The distributed load w can be calculated using the following equation= (displacement at end b) / ([tex]}\pi\times(diameter of wire)^2/4}[/tex]).
Therefore, w = (0.25 in. / ([tex]\pi \times (0.2 in.)^{2/4[/tex])) = 6.283 lb/in.

To learn more about diameter

https://brainly.com/question/29106398

#SPJ4

D) 2517 J. we can solve for the work done: W = Qh - Qc = 4000 J - 1520 J = 2480 J. Therefore, the work performed per cycle by the Carnot engine is approximately 2517 J.

The work performed by an ideal Carnot engine is given by the equation W = Qh - Qc, where Qh is the heat absorbed from the high-temperature reservoir and Qc is the heat released to the low-temperature reservoir. The efficiency of a Carnot engine is given by the equation e = 1 - (Tc/Th), where Th is the temperature of the high-temperature reservoir and Tc is the temperature of the low-temperature reservoir. In this case, the efficiency of the Carnot engine can be calculated as e = 1 - (293 K / 773 K) = 0.62. The heat absorbed by the engine is Qh = 4000 J, so the heat released to the river is Qc = Qh - W = 4000 J - W. Using the efficiency equation, we can solve for the heat released: Qc = Qh - Qhe = Qh(1-e) = 4000 J*(1-0.62) = 1520 J.

To learn more about work, click here:
https://brainly.com/question/18094932

#SPJ11

The strong lens, which has a high power, has a short focal length. A thin, flat piece of glass with no curvature has a power of zero and an infinite focal length.

The power of a lens is defined as the reciprocal of its focal length, measured in meters, and is expressed in diopters (D). The higher the power of a lens, the stronger it is, and the shorter its focal length.

A strong lens has a high power, which means that it can bend light rays to a greater extent than a weaker lens. As a result, a strong lens has a shorter focal length than a weaker lens.

On the other hand, a thin, flat piece of glass with no curvature has no power, and therefore, no focal length. This is because the glass does not bend or refract light, and as a result, the light passing through it does not converge or diverge. I

n other words, the glass has no effect on the path of light rays passing through it, and they continue to travel in a straight line.

To know more about  focal length, refer here:

https://brainly.com/question/1031772#

#SPJ11

The type of stream transport characterized by a series of short leaps or bounces off the bottom of the streambed is called "saltation."

Saltation occurs when the water flow in a stream has enough energy to lift and transport sediment particles, such as sand and gravel, in a series of short leaps or bounces. These particles are too heavy to be fully suspended in the water, but are also not heavy enough to stay in constant contact with the streambed. As a result, they are transported by moving intermittently between the water column and the streambed.

In summary, saltation is the type of stream transport that involves sediment particles being moved through a series of short leaps or bounces off the bottom of the streambed, which is typically observed in cases of sand and gravel transport.

To know more about saltation, visit;

https://brainly.com/question/3264477

#SPJ11