complete and balance the following redox reaction in acidic solutionmno4-(aq) n2o3 (aq) --> mn2 (aq) no3- (aq)

This statement is incomplete and does not provide enough information to determine its truth or falsehood. The statement should include what happens to compound x at a specific temperature or temperature range.

i. Compound x sublimes at 1 atm - This statement does not provide enough information about compound x to determine if it is true or false. Sublimation occurs when a substance transitions from a solid to a gas without passing through a liquid phase. Whether or not compound x sublimes at 1 atm depends on its properties and the conditions at 1 atm.

ii. At point h, x exists entirely as x(g) - This statement is true. Point h on a phase diagram represents the temperature and pressure conditions where compound x exists entirely as a gas.

iii. X(l) is more dense than x(s) - This statement is generally true for most substances, but it depends on the specific properties of compound x. Generally, the density of a substance increases as it transitions from a gas to a liquid to a solid.

iv. Moving from point f to point g, x melts - This statement is false. Moving from point f to point g on a phase diagram represents a decrease in temperature and pressure, which causes compound x to transition from a gas to a solid (deposition), not from a solid to a liquid (melting).

v. At t - This statement is incomplete and does not provide enough information to determine its truth or falsehood. The statement should include what happens to compound x at a specific temperature or temperature range.

Learn more about temperature range

brainly.com/question/23303647

#SPJ11

The answer is 0.050 M. The molar solubility of a compound depends on its solubility product (Ksp), which is the equilibrium constant for the dissociation of the compound into its constituent ions in water.

What is Molar Solubility?

Molar solubility is defined as the number of moles of a solute that can dissolve in one liter of solvent (usually water) to form a saturated solution at a particular temperature and pressure. It is typically denoted by the symbol "s" and has units of mol/L.

Substituting Ksp and Kf into the expression for x:

Ksp = [Ag+][Cl-] =[tex]x^{2}[/tex]

Kf = [[tex]Ag(CN)^{2}[/tex]-]/[Ag+][tex][CN-]^{2}[/tex]

[Ag(CN)2-] = [Ag+]

x = [Ag+]

x^2 = Ksp = 1.8 × [tex]10^{-10[/tex]

x = √(1.8 × [tex]10^{-10}[/tex]) = 1.34 × [tex]10^{-5}[/tex]

[Ag(CN)2-] = 5.6 ×[tex]10^{-7}[/tex] M

Since [Ag(CN)2-] = [Ag+], the molar solubility of AgCl in the presence of 0.10 M NaCN is:

x = [Ag+] = [Ag(CN)2-] = 5.6 × [tex]10^{-7}[/tex] M

Therefore, the answer is 0.050 M.

Learn more about Molar Solubility from the given link

https://brainly.com/question/28202068

#SPJ4

The specific heat of the metal is approximately 994.3 J/(kg°C). This means that it takes 994.3 J of energy to raise the temperature of one kilogram of this metal by one degree Celsius.

We can use the formula for heat energy,

Q = m x c x ΔT,

We know the values for Q, m, and ΔT from the problem:

Plugging in the given values, we get:

7690 J = 0.085 kg x c x (100°C - 11.2°C)

We can simplify this equation by subtracting the initial temperature from the final temperature:

7690 J = 0.085 kg x c x 88.8°C

Solving for c, we get:

c = 7690 J / (0.085 kg x 88.8°C)

c = 994.3 J/(kg°C)

To know more about specific heat  here

brainly.com/question/11297584

#SPJ1

--The complete Question is, an 85 gm piece of metal is boiling and has an initial temp of 100 degrees after being removed from the water the metal cools down to 11.2 degrees celsius. 7690 j of energy is released what is the specific heat of the metal?--

The gas occupies 900.0 ml at the temperature of the 27. 0 °C. The volume at the 132. 0 °C is the 4400 mL.

The expression for the volume and the temperature is as :

V₁ / T₁ = V₂ / T₂

Where,

The Initial temperature of the gas, T₁ = 27. 0 °C

The final temperature of the gas, T₂ =  132. 0 °C

The initial volume of the gas, V₁ = 900mL

The final volume of the gas, V₂ = ?

V₂ = V₁ T₂ / T₁

The V₁  = 900 mL

The T₁ = 27. 0 °C

The T₂ = 132. 0 °C

The V₂ = ?

V₂ = ( 900 × 132 ) /27

V₂ = 4400 mL

Thus, the final volume of the gas is 4400 mL.

To learn more about temperature here

https://brainly.com/question/22808691

#SPJ4

The oxidation number of oxygen increases in reaction b) 2SO2 (g) + O2 (g) → 2SO3 (g).

In this reaction, the oxidation number of sulfur increases from +4 to +6, while the oxidation number of oxygen decreases from 0 to -2. This means that oxygen has been oxidized because its oxidation number has increased. The reaction involves the addition of oxygen to sulfur dioxide to form sulfur trioxide, which is an important industrial process used in the production of sulfuric acid.

To know more about oxidation number, click here:-

https://brainly.com/question/29263066

#SPJ11

To find the milliliters of 0.0850 M NaOH required to titrate 40.0 mL of 0.0900 M HNO3 to the equivalence point, you can use the formula: So, 42.4 milliliters of 0.0850 M NaOH are required to titrate 40.0 mL of 0.0900 M HNO3 to the equivalence point.

moles of acid = moles of base

First, find the moles of HNO3:
moles of HNO3 = (volume in L) * (molarity)
moles of HNO3 = (0.0400 L) * (0.0900 M) = 0.00360 moles

Since the ratio of acid to base is 1:1, the moles of NaOH required will also be 0.00360 moles. Now, find the volume of NaOH needed:

volume of NaOH = (moles of NaOH) / (molarity of NaOH)
volume of NaOH = (0.00360 moles) / (0.0850 M) = 0.0424 L

Finally, convert the volume to milliliters:

0.0424 L * 1000 = 42.4 mL

The moment in a chemical reaction when the quantity of one reactant has entirely interacted with the amount of another reactant is known as the equivalence point in chemistry. The reactants have now been devoured in the ideal ratios, causing one reactant to be completely consumed by the other.The equivalency point is achieved, for instance, in acid-base titration when the ratio of acid to base reaches unity. The solution is now neutral, not acidic or basic. Typically, an indicator whose colour changes when the reaction reaches the stoichiometric point is used to determine the equivalence point.

Learn more about equivalence point here:

https://brainly.com/question/31375551

#SPJ11

The empirical formula of the magnetite ore is FeO₂, which indicates that the ore contains one iron atom and two oxygen atoms in each molecule.

The empirical formula of the iron ore, magnetite, can be determined using the mass of iron and oxygen present in the sample. Given that 72.35 g of iron is obtained from 100.0 g of the ore, the mass of oxygen can be calculated by subtracting the mass of iron from the total mass of the ore:

Mass of oxygen = Total mass of ore - Mass of iron

Mass of oxygen = 100.0 g - 72.35 g

Mass of oxygen = 27.65 g

To determine the empirical formula, we need to convert the mass of iron and oxygen to moles and then find the simplest whole number ratio between them. The molar mass of iron is 55.845 g/mol and the molar mass of oxygen is 15.999 g/mol. Using these values, we can calculate the number of moles of each element:

Moles of iron = 72.35 g / 55.845 g/mol = 1.295 mol

Moles of oxygen = 27.65 g / 15.999 g/mol = 1.728 mol

Dividing each of these values by the smallest value (1.295 mol) gives us the simplest whole number ratio:

Moles of iron = 1.295 mol / 1.295 mol = 1

Moles of oxygen = 1.728 mol / 1.295 mol = 1.334

Rounding to the nearest whole number gives us the empirical formula FeO₂.

To know more about the Iron ore, here

https://brainly.com/question/18649046

#SPJ4

In the context of geometric random variables, the letter "N" usually stands for the number of trials required to obtain the first success in a sequence of independent Bernoulli trials with a fixed probability of success, denoted by "p".

A geometric random variable models the probability distribution of the number of failures that occur before the first success in a sequence of independent trials, each with a probability of success "p". The number of trials required to obtain the first success is a random variable that follows a geometric distribution. The probability mass function of a geometric random variable N is given by P(N = k) = (1 - p)^(k-1) * p, where k is the number of trials required to obtain the first success. The expected value of a geometric random variable is E[N] = 1/p.

The geometric distribution is commonly used in various fields, such as reliability analysis, queueing theory, and statistical inference.

To learn more about Probability click here

https://brainly.com/question/30034780

#SPJ11

To some extent, the statement that every electron shields the nuclear charge from every other electron is valid.


Electrons have a negative charge and are attracted to the positively charged nucleus of an atom. However, electrons also repel each other due to their negative charges. As a result, each electron in an atom experiences both attraction to the nucleus and repulsion from other electrons.

The shielding effect occurs when electrons in the inner energy levels of an atom shield the positive charge of the nucleus from the outer electrons. This shielding reduces the net attractive force that the outer electrons experience from the nucleus.

However, it is important to note that not all electrons in an atom shield the nuclear charge equally. Electrons in higher energy levels (further from the nucleus) are less effective at shielding the nuclear charge than electrons in lower energy levels (closer to the nucleus).

Additionally, electrons in the same energy level do not shield each other completely because they still experience some repulsion from each other.

Therefore, while the statement is valid to some extent, it is not a complete description of the complex interactions between electrons and the nucleus in an atom.

learn more about shielding effect

https://brainly.com/question/27985711

#SPJ11

If the packing falls through the column, the first step is to turn off the flow of liquid or gas through the column to prevent further damage or loss.

Then, the column needs to be carefully inspected to determine the extent of the damage and identify the cause of the packing failure. Depending on the severity of the damage, the packing may need to be replaced or repositioned, and any underlying issues that contributed to the failure need to be addressed.

It is important to follow proper safety protocols and procedures when working with columns and packing to prevent accidents or injuries. If the packing falls through the column, it's essential to stop the process and carefully disassemble the column to remove the dislodged packing material.

Then, reassemble the column, ensuring the packing is properly positioned and secured to prevent future issues. Once the column is reassembled, you can resume the process.

to know more about packing falls pls visit:

https://brainly.com/question/15268466

#SPJ11

If the packing falls through the column, the first step is to turn off the flow of liquid or gas through the column to prevent further damage or loss.

The column needs to be carefully inspected to determine the extent of the damage and identify the cause of the packing failure.

It is important to follow proper safety protocols and procedures when working with columns and packing to prevent accidents or injuries. If the packing falls through the column, it's essential to stop the process and carefully disassemble the column to remove the dislodged packing material.

Thus, we will reassemble the column, ensuring the packing is properly positioned and secured to prevent future issues. Once the column is reassembled, you can resume the process.

Learn more about packing falls here:

brainly.com/question/15268466

#SPJ4

The minimum integer value of the stoichiometric coefficient for substance HCl(aq) needed to balance this chemical equation is 6.

In the field of chemistry known as stoichiometry, needed quantitative data is ascertained by exploiting relationships between the reactants and/or products of a chemical process. Stoichiometry literally translates as the measure of elements because the Greek words stoikhein and metron both mean element and measure, respectively. To comprehend the links between products and reactants and why they exist, which necessitates understanding how to balance processes, is necessary before using stoichiometry to do calculations regarding chemical reactions.

Chemical equations using chemical symbols are widely used to represent chemical processes in chemistry. The reactants are shown on the left side of the equation, and the products are shown on the right, with a single or double arrow separating the two sides to indicate the reaction's direction. When discussing solubility constants, the significance of single and double arrows is significant, but we won't go into detail about it in this module. An equation must have an equal number of atoms on both its left and right sides in order to be balanced. By increasing the coefficients, one can achieve this.

Learn more about stoichiometric coefficient:

https://brainly.com/question/6666875

#SPJ4

True; the magnitude of the crystal field splitting affects the magnetic properties of a complex ion because it affects the pairing of electrons.

The magnitude of the crystal field splitting refers to the energy difference between the d orbitals in a complex ion, which determines the electronic configuration and the extent of electron pairing. If the splitting is small, the electrons may pair up in the lower energy orbitals, leading to a diamagnetic complex.

If the splitting is large, the electrons may occupy higher energy orbitals, resulting in an unpaired electron and a paramagnetic complex. Therefore, the magnetic properties of a complex ion are directly affected by the magnitude of the crystal field splitting. Hence, the statement "the magnitude of the crystal field splitting affects the magnetic properties of a complex ion because it affects the pairing of electrons" is true.

Learn more about paramagnetic complex here:

https://brainly.com/question/17080272

#SPJ11

When one equivalent of HBr reacts with the given compound, two different products can be formed: kinetic and thermodynamic.The kinetic product is formed through the faster reaction pathway, which usually involves a lower activation energy.

In this case, the kinetic product is formed by adding the HBr molecule to the more substituted carbon of the double bond. This results in a more stable intermediate, which can then form the kinetic product through proton transfer. The kinetic product is shown below:
[Insert image of kinetic product].The thermodynamic product is formed through the slower reaction pathway, which usually involves a higher activation energy.

In this case, the thermodynamic product is formed by adding the HBr molecule to the less substituted carbon of the double bond.This results in a less stable intermediate, which can then form the thermodynamic product through proton transfer. The thermodynamic product is shown below:[Insert image of thermodynamic product]

To know more about compound  visit:

https://brainly.com/question/23334479
#SPJ11

∆Hf(BaBr₂) = -262 kJ/mol. Ba atomization energy (175) and 1st ionization energy (503) overcome the lattice energy (+1950), making the formation of BaBr₂ exothermic.

Explanation: A Born-Haber cycle shows the steps involved in the formation of an ionic compound. For BaBr₂, the cycle includes formation of Ba atoms from solid Ba, dissociation of Br₂, ionization of Ba to form Ba⁺, electron affinity of Br to form Br⁻, and formation of the solid BaBr₂ lattice. The lattice energy (+1950 kJ/mol) is overcome by the sum of the atomization energy (175 kJ/mol) and the first ionization energy of Ba (503 kJ/mol), as well as the exothermicity of adding electrons to Br to form Br⁻ (-325 kJ/mol). The overall enthalpy change (∆Hf) for the formation of BaBr₂ is -262 kJ/mol, indicating that the process is exothermic and spontaneous.

Learn more Ba⁺, electron about here:

https://brainly.com/question/19360277

#SPJ11

The pressure when the balloon is at maximum volume would be 0.0258 atm.

Boyle's law states that the product of the pressure and volume of a gas is constant, as long as the temperature is constant.

Mathematically, the law can be expressed as:

[tex]P_1V_1[/tex] = [tex]P_2V_2[/tex]

In this case:

Solving for P2, we get:

P2 = (P1 x V1) / V2

= (0.993 atm x 195 L) / 7.50 x 10^3 L

= 0.0258 atm

Therefore, the pressure when the balloon is at maximum volume is 0.0258 atm.

More on Boyle's law can be found here: https://brainly.com/question/30367067

#SPJ1

The elements with the highest density are found in the metals group of the periodic table, specifically in the late transition metals and the rare earth elements.

These elements have a high atomic number in periodic table, which means that they have a large number of protons in their nuclei, and therefore a high number of neutrons as well. As a result, they have a high atomic mass and a high density.

Some examples of elements with high density include:

Platinum (Pt)

Gold (Au)

Mercury (Hg)

Tantalum (Ta)

Tungsten (W)

Germanium (Ge)

Cerium (Ce)

It's worth noting that the density of an element can also be affected by its crystal structure, as different crystal structures can have different densities.  

Learn more about periodic table Visit: brainly.com/question/15987580

#SPJ4

Correct Question:

in what area of the periodic table would the elements with the highest density be found?

When an acid reacts with a base, it forms a salt and water, in a process known as neutralization.

However, not all substances can react with hydrochloric acid (HCl) to form a salt. Calcium hydroxide (Ca(OH)2) is a base that will not react with HCl to form a salt, but rather it will form calcium chloride and water. On the other hand, Ag, Zn, Cu, and CO3 are all metals and anions that can react with HCl to form their respective chlorides. Thus, the reaction between an acid and a base can vary depending on the specific substances involved, and the resulting product will be determined by their chemical properties.

To know more about acid please visit:

https://brainly.com/question/29426933

#SPJ11

As we add a base to an acidic solution, the pH of the solution increases.

The pH will continue to increase as we add more base until it reaches a certain point where the amount of base added is stoichiometrically equivalent to the amount of acid present in the solution. At this point, the pH of the solution will be at its highest point, known as the equivalence point.

At the equivalence point, all the acid has reacted with the base, and the solution contains only the salt and water formed by the reaction. The pH of the solution at the equivalence point will depend on the strength of the acid and base used.

The reason for the increase in pH as we add base is due to the neutralization reaction that takes place between the acid and the base. The acid donates a proton (H⁺) to the base, which accepts the proton and becomes a conjugate acid. This reaction reduces the concentration of H⁺ ions in the solution, which causes the pH to increase.

To know more about equivalence point here

https://brainly.com/question/4518249

#SPJ4

Answer:

Blue litmus turn to red color in the presence of an acid

Answer:

Z: Planet was formed after the sun.

Explanation:

Characteristic Z: The planet was formed after the sun cannot be used to help identify the planet since all the planets in the solar system, including Earth, were formed after the sun. Therefore, this characteristic applies to all planets in the solar system, and it cannot be used to distinguish one planet from another.

Good luck! >:))))

It would take approximately 23.0 minutes for the amount of argon-44 to decrease from 80.0 mg to 10.0 mg.

To solve this problem, we can use the formula for radioactive decay:

N(t) = N0 * (1/2)^(t/T)

where N(t) is the amount of the radioisotope at time t, N0 is the initial amount, T is the half-life, and t is the time elapsed.

We can rearrange this formula to solve for t:

t = T * log(N(t)/N0) / log(1/2)

Putting in the values for argon-44:

N0 = 80.0 mg

N(t) = 10.0 mg

T = 12 min

t = 12 min * log(10.0 mg / 80.0 mg) / log(1/2)

t = 12 min * (-1.32193) / (-0.69315)

t = 23.0 min (rounded to 2 decimal places)

Learn more on radioisotopes here https://brainly.com/question/18640165

#SPJ1

Answer:

The splitting between energy levels is greater for higher lying energy levels than for lower lying energy levels because of the Coulomb force, which is the force of attraction or repulsion between charged particles.

In an atom, the positively charged nucleus exerts an attractive force on the negatively charged electrons, holding them in orbit around the nucleus. However, the electrons also repel each other due to their negative charges. The net result is that the energy levels of the electrons in an atom are determined by a balance between the attractive and repulsive forces acting on them.

The Coulomb force is proportional to the product of the charges of the interacting particles and inversely proportional to the square of the distance between them. As the distance between the nucleus and the electron increases, the Coulomb force becomes weaker, resulting in smaller energy differences between adjacent energy levels. Conversely, as the distance between the nucleus and the electron decreases, the Coulomb force becomes stronger, resulting in larger energy differences between adjacent energy levels.

Since higher lying energy levels are farther away from the nucleus than lower lying energy levels, the Coulomb force is weaker for the higher energy levels, resulting in larger energy differences between adjacent energy levels. This is why the splitting between energy levels is greater for higher lying energy levels than for lower lying energy levels.

The pH of a weak acid solution can be calculated using the equation:

pH = -log(Ka * [HA])

Acid is a type of chemical compound that contains hydrogen molecules and is characterized by a sour taste and a corrosive nature. Acids can be divided into two categories: mineral acids (e.g. hydrochloric acid) and organic acids (e.g. acetic acid). Acids are strong electrolytes, meaning that when they are dissolved in water, they dissociate into their component ions. These ions are proton donors, and can react with other substances to form new compounds.

Where Ka is the acid dissociation constant and [HA] is the initial concentration of the acid.

Plugging in the values given, we get:

pH = -log(Ka * [HA]) = -log(0.20) = -(-1.7) = 1.7

To learn more about acid

https://brainly.com/question/25148363

#SPJ4

The answer is c. 3. Sodium borohydride (NaBH4) is a strong reducing agent that can reduce aldehydes and ketones to their corresponding alcohols.

Borohydride is an inorganic compound that is composed of boron and hydrogen. It is a type of hydride, which is a compound that contains hydrogen and a metal or metalloid. Borohydride has a number of commercial and industrial uses, such as in the production of fuel cells, biodegradable detergents, and pharmaceuticals. It is also used as a reducing agent in the synthesis of organic compounds. Borohydride can be produced through a variety of methods, such as electrochemical reduction and thermal decomposition. Borohydride is a strong reducing agent, and its use as a reagent in organic synthesis has been increasing over the past few years due to its ease of use, low cost, and high reactivity.

For each mole of NaBH4, three moles of ketone can be reduced.

Therefore the correct option is C.

To learn more about borohydride

https://brainly.com/question/31321350

#SPJ4

To build a simple filtration apparatus, you will need the following materials:

Steps to build a simple filtration apparatus:

1. Choose a funnel that fits securely on top of the beaker or flask.

2. Fold a filter paper in half and then in half again to create a cone shape that fits inside the funnel.

3. Place the folded filter paper in the funnel, making sure that the paper touches the sides of the funnel to create a seal.

4. Wet the filter paper with a small amount of the solvent that will be used to filter the material.

5. Place the funnel on top of the beaker or flask, making sure that the funnel is centered and level.

6. Pour the material to be filtered onto the filter paper in the funnel.

7. Allow the solvent to pass through the filter paper, carrying the desired particles with it, and collecting in the beaker or flask below.

8. Dispose of the filter paper and collected material appropriately.

Note: The size and shape of the funnel, filter paper, and container may vary depending on the amount and nature of the material being filtered.

To know more about filtration apparatus, please click on:

https://brainly.com/question/5106546

#SPJ11

The hydronium ion concentration, [H₃O⁺] = 7.14 x 10⁻⁶ M, which is calculated in the below section.

The value of Kw = 5.1 x 10⁻¹¹

In the autoionization of water, a proton is transferred from one water molecule to another to produce a hydronium ion (H₃O⁺) and a hydroxide ion (OH⁻). The equilibrium expression for this reaction is Kw = [H₃O⁺][OH⁻],

The concentration of hydronium ion and hydroxyl ion when a water molecule dissociates is the same which is 1 mol.

Kw = [H₃O] [OH⁻]

5.1 x 10⁻¹¹ = [H₃O⁺]²

[H₃O⁺] = √(5.1 x 10⁻¹¹)

[H₃O⁺] = 7.14 x 10⁻⁶ M

To learn more about hydronium ion check the link below-

brainly.com/question/27586088

#SPJ4

Out of the given salts, the one that produces a neutral solution when dissolved in water is NH4F. When an acid and a base react, they produce salt and water. Some salts can produce an acidic or basic solution depending on the nature of the acid and base used.

In the case of NH4F, it is a salt produced from the reaction of a weak acid (NH4OH) and a strong base (HF). Therefore, it has the ability to produce a neutral solution when dissolved in water. LiOCl, BaBr2, CaSO3, and (NH4)2SO4 are all produced from the reaction of a strong acid and a strong base or a weak acid and a weak base, making them acidic, basic or even amphoteric (able to produce both acidic and basic solutions) when dissolved in water.  For example, if a strong acid and a weak base react, the resulting salt will produce an acidic solution. On the other hand, if a weak acid and a strong base react, the resulting salt will produce a basic solution.

To know more about neutral solution

https://brainly.com/question/29510389

#SPJ11

When we react a weak base with a strong acid, the component of the base that contributes to the ph of the solution is the conjugate acid.

When a weak base is reacted with a strong acid, the weak base is protonated by the acid to form its conjugate acid. The conjugate acid of the weak base is the species that contributes to the pH of the solution since it is the one that can donate protons to water and increase the concentration of H₃O⁺ ions.

The conjugate base of the weak base, on the other hand, is typically very weakly basic and does not affect the pH significantly.

For example, when ammonia (NH₃), a weak base, reacts with hydrochloric acid (HCl), a strong acid, it forms ammonium chloride (NH₄Cl). The ammonium ion (NH₄⁺), which is the conjugate acid of NH₃, contributes to the pH of the solution by donating protons to water to form H₃O⁺ ions. |

The chloride ion (Cl⁻), which is the conjugate base of HCl, does not affect the pH significantly.

Hence when a strong acid reacts with a weak base, the part of the base that affects the solution's pH is called the conjugate acid.

To know more about conjugate acid, refer here:

https://brainly.com/question/31229565#

#SPJ11

The structural features that would allow a molecular substance to exhibit hydrogen bonding between its molecules are:
- one or more hydrogen atoms
- one or more o-h bonds
- one or more n-h bonds

Hydrogen bonding occurs between molecules when hydrogen atoms are bonded to highly electronegative atoms such as oxygen, nitrogen, or fluorine. Therefore, the presence of these atoms in a molecule is necessary for hydrogen bonding to occur. Additionally, the presence of o-h and n-h bonds in a molecule indicates that there are hydrogen atoms bonded to oxygen or nitrogen atoms, respectively, which are capable of participating in hydrogen bonding.
To allow a molecular substance to exhibit hydrogen bonding between its molecules, the following structural features are necessary:

1. One or more hydrogen atoms
2. One or more O-H bonds OR one or more N-H bonds

So, the correct options are:

- One or more hydrogen atoms
- One or more O-H bonds
- One or more N-H bonds

Hydrogen bonding occurs when a hydrogen atom is covalently bonded to a highly electronegative atom like oxygen (O) or nitrogen (N). These O-H or N-H bonds create a polar environment where hydrogen atoms develop a partial positive charge, allowing them to interact with nearby electronegative atoms, such as oxygen or nitrogen, in other molecules.

To know more about  bonding visit:

brainly.com/question/2495446

#SPJ11

Heat capacity of the calorimeter is 15.68 kJ/°C when a 21.8 g sample of ethanol is burned in a bomb calorimeter and the temperature rises from 25.0 °C to 62.3 °C, with a ΔrU of -1235 kJ/mol.

What is the heat capacity of a bomb calorimeter when a given mass of ethanol is burned?

To calculate the calorimeter's heat capacity, use the following formula:

q = CΔT

Where q is the amount of heat absorbed by the calorimeter, C is its heat capacity, and T is the temperature change.

First, let's calculate the amount of heat released by the combustion of ethanol. We can use the given value of ΔrU and the number of moles of ethanol burned to calculate the heat released:

n = m/M

n = 21.8 g / 46.07 g/mol = 0.473 mol

qrxn = ΔrU * n

qrxn = -1235 kJ/mol * 0.473 mol = -585.16 kJ

Since the heat released by the reaction is absorbed by the calorimeter, we have:

qcal = -qrxn

qcal = 585.16 kJ

Finally, we can utilise the values of qcal and T to compute the calorimeter's heat capacity:

C = qcal / ΔT

C = 585.16 kJ / (62.3 °C - 25.0 °C)

C = 585.16 kJ / 37.3 °C

C = 15.68 kJ/°C

Therefore, the heat capacity of the calorimeter is 15.68 kJ/°C.

To learn more about calorimeter, visit: https://brainly.com/question/2963957

#SPJ4