The empirical formula of the hydrocarbon is [tex]C_2H_3[/tex] if combustion of 8.60 g of a hydrocarbon produced 26.5 g of [tex]CO_2[/tex] and 12.2 g of [tex]H_2O[/tex].
What is an empirical formula?A chemical formula showing the simplest ratio of elements in a compound rather than the total number of atoms in the molecule [tex]CH_2O[/tex] is the empirical formula for glucose.
1 mole of carbon dioxide contains a mass of 44 g, out of which 12 g are carbon.
Hence, in this case the mass of carbon in 8.46 g of [tex]CO_2[/tex]:
([tex]\frac{12}{44}[/tex]) × 8.46 = 2.3073 g
1 mole of water contains 18 g, out of which 2 g is hydrogen;
Therefore, 2.6 g of water contains;
([tex]\frac{2}{18}[/tex] × 2.6 = 0.2889 g of hydrogen.
Therefore, with the amount of carbon and hydrogen from the hydrocarbon, we can calculate the empirical formula.
We first calculate the number of moles of each,
Carbon = [tex]\frac{2.3073}{12}[/tex] = 0.1923 moles
Hydrogen = [tex]\frac{0.2889}{1}[/tex]= 0.2889 moles
Then, we calculate the ratio of Carbon to hydrogen by dividing by the smallest number value;
Carbon : Hydrogen
[tex]\frac{0.1923}{0.1923}[/tex] : [tex]\frac{0.2889}{0.1923}[/tex]
1 : 1.5
(1 : 1.5) 2
= 2 : 3
Hence, the empirical formula of the hydrocarbon is [tex]C_2H_3[/tex].
Learn more about the empirical formula here:
https://brainly.com/question/14044066
#SPJ1
Which of the following alkali metal is expected to melt if the room temperature
rise to 30oc (a) Na (b) K (c) Rb (d) Cs
What is the percent yield for the reaction below when
705.0 g SO2 and 80.0 g 0₂ produce 586.0 g SO3?
2SO2(g) + O2(g) → 2SO3(g)
The percent yield would be 68.3%
Percent yieldThis is given as:
Percent yield = yield/theoretical yield x 100%
From the equation:
[tex]2SO_2(g) + O_2(g) -- > 2SO_3(g)[/tex]
The mole ratio of the reactants is 2;1
Mole of 705 g SO2 = 705/64 = 11.02 moles
Mole of 80 g O2 = 80/32 = 2.5 moles
O2 is limiting.
Mole ratio of O2 and SO3 = 1:2
Mole equivalent of SO3 = 2.5 x 2 = 5.0 moles
Mass of 5 moles SO3 = 5 x 80 = 400 grams
Percent yield = 400/586 = 68.3%
More on percent yield can be found here: https://brainly.com/question/17042787
#SPJ1
Questions 1. Why does the colour change not occur instantly? Questions 1 . Why does the colour change not occur instantly ?in the reaction between carbon dioxide and water
Answer:
which is an example of analog device
Due to the reaction's slow process of producing ppt or a change in color.
What is chemical reaction?Chemical reaction is defined as a procedure where one or more compounds, known as reactants, are changed into one or more new substances, known as products. Chemical reactions result in the formation of new chemical bonds between the atoms of the reactant molecules and the product particles' atoms. While there are the same number of atoms both before and after the chemical transition, there will be a change in the number of molecules.
When carbon dioxide and water combine, carbonic acid is created. The indicator changes color as a result of the water becoming slightly acidic due to carbon dioxide gas from exhaled breath. Dissolution causes a change in pressure. This suggests a physical alteration.
Thus, due to the reaction's slow process of producing ppt or a change in color.
To learn more about chemical reaction, refer to the link below:
https://brainly.com/question/29039149
#SPJ2
What is the number of elements in 2Ca(OH)2
TUTOR Determining Molecular Weight
What is the molecular weight of Cr3(ASO4)2? amu
The molecular weight of Cr3(AsO4)2 is 433.827.
Is molecular weight the same As molar mass?Furthermore, the primary distinction between each is that molar mass gives the mass of a mole of a selected substance. While molecular weight is the mass of a molecule of a particular substance. At an equal time as the definition and devices are splendid for molar mass and molecular weight, the value is the same.
The sum of the atomic hundreds of all atoms in a molecule is based totally on a scale wherein the atomic loads of hydrogen, carbon, nitrogen, and oxygen are 1, 12, 14, and 16, respectively.
Learn more about molecular weight here https://brainly.com/question/26388921
#SPJ10
Choose the correct option.
1. A chain of small chemical units combined to form a large single unit is called ______
a) Polymer
b) Poly
c) Polythene
d) None of the above
2. Polythene and PVC are examples of
a) Bio degradable substance
b) Thermosetting plastics
c) Thermoplastics
d) Rayon
3. Plastics which when moulded once, cannot be softened by heating. Such plastics are called __ a) Polythene
b) Thermoplastics
c) Polyster
d) Thermosetting plastics
4. Polycot is made by mixing two types of fibres namely
a) Silk + Cotton
b) Polythene + cotton
c) Silk + Polyester
d) Polyester + Cotton
5. The 4 R Principle is
a) Reduce, Reuse, Recycle, Recover
b) Remember, reduce, Recycle, Rejoice
c) Repeat, Rejoice, recycle, reduce
d) None of the above
6. _____________ is an example of natural polymer
a) Rayon
b) Cellulose
c) Nylon
d) All of the above
7. Which of the following is Non-biodegradable ?
a) Woolen clothes
b) Plastic bag,
c) Cotton cloth
d) Wood
8. Bakelite and Melamine are examples of
a) Thermosetting plastics
b) Silk
c) Nylon
d) Rayon
9. Fire proof plastic uniform worn by fire fighters has a coating of _____ to make it fire resistant. a) Nylon
b) Rayon
c) Melamine plastic
d) silk
The coating on modern non- stick cookware and electric iron is of
a) Terrycot
b) Rayon
c) Polyester
d) Teflon
examples of molecular compound
Answer:
Molecular compounds are inorganic compounds that take the form of discrete molecules. Examples include such familiar substances as water (H2O) and carbon dioxide (CO2). These compounds are very different from ionic compounds like sodium chloride (NaCl).
Assume that you measured exactly 2.0 mL of the sodium chloride solution into a small test tube. How many moles of
sodium chloride are in the tube?
PLEASE HELP ASASP!!!!!!!
Answer:
B
Explanation:
I took the test
If the earth were the size of an apple, which piece would best represent the amount of mass of the
atmosphere?
O the skin
O the meat
O the stem
O Oops..... I am sorry. I just ate the Pacific Ocean by mistake.
O a seed
If data from a clinical trial contains personal information about a study participant, which process should be used to separate identifying information from health information?
A. De-identification
B. Informed consent
C. ALCOA
D. Good documentation practices
If data from a clinical trial contains personal information about a study participant, De-identification process should be used to separate identifying information from health information. Thus, Option (A) is correct
What is De-identification process ?De-identification is a process of detecting identifiers (e.g., personal names and social security numbers) that directly or indirectly point to a person (or entity) and deleting those identifiers from the data.
De-identification and anonymization are strategies that are used to remove patient identifiers in electronic health record (EHR) data.
Hence, De-identification process should be used to separate identifying information from health information. Thus, Option (A) is correct.
learn More about health record here ;
https://brainly.com/question/11156017
#SPJ1
12. Consider the system PCl3(g) + Cl2(g) PCl5(g) at equilibrium at 25°C, for which H° = –92.5kJ at 25°C. When some Cl2(g) is added at constant volume and temperature, the ratio of the partial pressure of PCl5 to the partial pressure of PCl3 wil
For a system PCl3(g) + Cl2(g) PCl5(g) at equilibrium at 25°C, for which H° = –92.5kJ at 25°C, the ratio of the partial pressure of PCl5 to the partial pressure of PCl3 is will increase
What is the ratio of the partial pressure of PCl5 to the partial pressure of PCl3?Generally, the equation for chemiecal reaction is mathematically given as
PC3 (g) + C₁₁₂ (g) = PC15 (g) 3
Assuming the addition of some Cl2 gas. The reaction will shift to the right at the invariant volume temperature, maintaining equilibrium. This results in a rise in P9Cl5(g) and a fall in PpCl3(g).
PpCl (g) /PpCl (g) will increase
Read more about Chemical Reaction
https://brainly.com/question/11231920
#SPJ1
The ratio of the partial pressure of PCl₅ to the partial pressure of PCl₃ is will increase for a system PCl₃ (g) + Cl₂ (g) --> PCl₅ (g) at equilibrium at 25°C, for which H° = –92.5kJ at 25°C when some Cl₂ (g) is added at constant volume and temperature.
What is the ratio of the partial pressure of PCl₅ to the partial pressure of PCl₃?
Generally, the equation for chemical reaction is mathematically given as ;
PCl₃ (g) + Cl₂ (g) --> PCl₅ (g)
Assuming the addition of some Cl₂ gas,
The reaction will shift to the right at the constant volume and temperature, maintaining equilibrium.
This results in a rise in PCl₅ (g) and a fall in PCl₃(g).
Hence, the ratio of the partial pressure of PCl₅ to the partial pressure of PCl₃ is will increases
Read more about Chemical Reaction here;
brainly.com/question/11231920
#SPJ1
The properties of an element depend on the electron structure within its atoms. The electrons are arranged in different
orbitals, at different energy levels and sublevels. Match each sublevel to the maximum number of electrons it can
accommodate?
S=2, p=6, d=10, and f=14 the maximum number of electrons it can
accommodate.
What are orbitals?The probability of finding an electron around the nucleus.
The principal number (n), is the number of the shell, it goes from 1 to 7 and is represented by the letter K, L, M, N, O, P, Q. The maximum number of electrons in the shells are, K = 2, L = 8, M = 18, N = 32, O = 32, P = 18, Q =8.
The secondary number (l) is the subshells, and it goes from 0 to 4 and is represented, in order, for the letter, s, p, d, f. The maximum number of electrons permitted in each subshell is s = 2, p = 6, d = 10, f = 14.
The magnetic number (ml), is represented by orbitals, and it goes from -l to +l, passing by 0. The maximum number of electrons is 2 for each one.
The spin number (ms) refers to the rotation of the electron, and it can be +1/2 or -1/2.
Hence, S=2, p=6, d=10, and f=14 the maximum number of electrons it can
accommodate.
Learn more about the orbitals here:
https://brainly.com/question/18914648
#SPJ1
What is the IUPAC name of the following compounds i. CO₂ ii. NO₂ iii. HNO3 iv. H₂SO4 v. K-Cr₂O vi. [Fe(CN)
Explanation:
I) carbon dioxide
ii) nitrogen dioxide
iii) nitric acid
iv) sulphric acid
v) Potassium dichromate
vi) hexacyanoferrate (III) ion( not sure)
10. Two primary sites for the
polio virus replication?
Answer:
the cytoplasm
protein 3b more commonly called vpg
Is XeCl4 a molecular compound?
Answer:
Hint for Naming XeCl4
We have two non-metals so this is a molecular (sometimes called covalent) compound.
Fill in the coefficients that will balance the following reaction:
(Note: Use 1 as coefficient where appropriate)
Fe(HCO3)3 + CaO → Fe2O3 + Ca(HCO3)2
Answer:
2 Fe(HCO₃)₃ + 3 CaO ---> 1 Fe₂O₃ + 3 Ca(HCO₃)₂
Explanation:
The unbalanced equation:
Fe(HCO₃)₃ + CaO ---> Fe₂O₃ + Ca(HCO₃)₂
Reactants: 1 iron, 3 hydrogen, 3 carbon, 10 oxygen, 1 calcium
Products: 2 iron, 2 hydrogen, 2 carbon, 9 oxygen, 1 calcium
As you can see, the reaction is clearly unbalanced because the number of each element on both sides is different. The best way to go about balancing an equation is by trying to first balance an element located in only one molecule on either side. For example, I started trying to balance iron. After balancing iron, I looked to balance other elements that would have been affected by the new coefficient (i.e., hydrogen, carbon).
The balanced equation:
2 Fe(HCO₃)₃ + 3 CaO ---> 1 Fe₂O₃ + 3 Ca(HCO₃)₂
Reactants: 2 iron, 6 hydrogen, 6 carbon, 21 oxygen, 3 calcium
Products: 2 iron, 6 hydrogen, 6 carbon, 21 oxygen, 3 calcium
Now, with these coefficients, the quantity of each element on both sides is the same.
Identify bond types as either ionic, metallic or covalent
HCN
Fe
PbO
Si
Answer:
In ionic bond one element should be metal and next should be non metal. in covalent both element should be met Alice. if there valence electron is less than 4 than it is metal or more than 4 it is non metal.
A team of scientists altered the DNA of E. coli bacteria. The bacteria thus developed had the ability to generate insulin exactly identical to the human insulin molecule. What could be the likely impact of this biotechnology on the individual and the society?
The medical costs for insulin-dependent patients would rise.
Large-scale insulin could be produced in relatively lesser time.
The price of insulin available from sources other than bacteria may fall.
The patients who take insulin may become infected with E. coli bacteria.
Answer:
Large-scale insulin could be produced in relatively lesser time.
Explanation:
We already sort of do this where we infect the bacteria with a plasmid containing our insulin gene and it causes them to produce insulin. Since the question is saying that we edited their DNA directly, now these bacteria don't need to be infected with plasmid b/c now they can just pass these genes onto their offspring.
This will allow us to make TONS of insulin cuz bacteria are crazy good at making stuff and growing.
Approximately 50% of our bone is chemically calcium phosphate, Ca3(PO4)2
If an adult has 12 kg of bone, calculate the mass of calcium is present
Classify each of the following substances as a compound or element.
a. Gold _____________
b. Ethanol _____________
c. Sugar _____________
d. Sulfur _____________
e. Hydrogen gas______
f. Carbon dioxide_______
Answer:
A. Element
B. Compound
C. Compound
D. Element
E. Compound
F. Compound
Explanation:
Elements are what is already on the periodic table and compounds are the substances created when they are combined.
PLEASEEEE HELP MEEEEE
Answer:
3.82 x 10²¹ molecules As₂O₃
Explanation:
To find the amount of molecules arsenic (III) oxide (As₂O₃), you need to (1) convert kg to lbs, then (2) convert g As₂O₃ to moles As₂O₃ (via molar mass), and then (3) convert moles to molecules (via Avogadro's number).
1 kilogram = 2.2 lb
Molar Mass (As₂O₃): 2(74.992 g/mol) + 3(15.998 g/mol)
Molar Mass (As₂O₃): 197.978 g/mol
Avogadro's Number:
6.022 x 10²³ molecules = 1 mole
0.0146 g As₂O₃ 1 kg 189 lb
------------------------ x --------------- x ------------------ x ................
1 kg 2.2 lb
1 mole 6.022 x 10²³ molecules
x ------------------ x --------------------------------------- = 3.82 x 10²¹ molecules As₂O₃
197.978 g 1 mole
Consider the following reaction.
2Fe2O3(s)+3C(s)−→−heat4Fe(s)+3CO2(g)
Calculate the number of grams of Fe2O3 needed to react with 18.3 g C.
Answer:
162 g Fe₂O₃
Explanation:
To find the mass of Fe₂O₃, you need to (1) convert grams C to moles C (via molar mass from periodic table), then (2) convert moles C to moles Fe₂O₃ (via mole-to-mole ratio from reaction coefficients), and then (3) convert moles Fe₂O₃ to grams (via molar mass). It is important to arrange the ratios/conversions in a way that allows for the cancellation of units. The final answer should have 3 sig figs to reflect the given value.
Molar Mass (C): 12.011 g/mol
2 Fe₂O₃(s) + 3 C(s) ---> 4 Fe(s) + 3 CO₂(g)
Molar Mass (Fe₂O₃): 2(55.845 g/mol) + 3(15.998 g/mol)
Molar Mass (Fe₂O₃): 159.684 g/mol
18.3 g C 1 mole 2 moles Fe₂O₃ 159.684 g
-------------- x ---------------- x ------------------------- x ----------------- = 162 g Fe₂O₃
12.011 g 3 moles C 1 mole
How many grams of Fe(NO3)3 are present in a 20.0 mL sample of a 0.500 M solution?
The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, 0.80g of Fe(NO[tex]_3[/tex])[tex]_3[/tex] are present in a 20.0 mL sample of a 0.500 M solution.
What is molarity?Molarity can be calculated by dividing number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.
Mathematically,
Molarity= number of moles of solute/volume of solution in litre (1)
Where,
moles= given weight /by molecular weight
= w/241.8
Substituting values in equation 1
0.500= (w/241.8)/(20.0 /1000)
w=0.80g
Therefore, 0.80g of Fe(NO[tex]_3[/tex])[tex]_3[/tex] are present in a 20.0 mL sample of a 0.500 M solution.
Learn more about Molarity, here:
https://brainly.com/question/16727614
#SPJ2
How would you draw the ionic compound Beryllium Arsenide lewis structure?
Answer:
[Na]^+ [Cl]^-
Explanation:
Lets say its sodium, its number of electrons is 11, but when its stable (an ion), it is 10. and chloride, number of electrons is 17, but when its stable (an ion) it is 18. So the lewis structure for that is, remember with the straight brackets (not sure what it's called, but you know what I mean I guess) its this one: [ ]
Sodium will be + because it has more protons (11-10 = +1), and chloride will be - because it gained an electron, so has more electrons than protons (17-18 = -1)
So the lewis structure would be:
[Na]^+ for sodium
and
[Cl]^- for chlorine
Sodium chloride:
[Na]^+ [Cl]^-
Also just to add, only 1 of each atom (Na and Cl) was needed for the bonding, but if let's say example; 2 Cl was needed to bond with sodium, there would be 2 Cl (same) and 1 Na.
QUESTION 1
What happens when water droplets are on a glass surface?
O They scatter around, maintaining their spherical shapes.
They spread and stick to the surface.
They join to form on gigantic sphere.
O They evaporate.
Answer:
It appears all of them are correct
Smaller drops will scatter around while maintaining their shape
Larger drop will spread stick to the surface.
and drops close together will join to form on gigantic sphere(but not perfect sphere)
and if they are in the sun, they'll eventually evaporate
Explanation:
just need help with one question pls
Answer:
A large absorption at 2950 cm⁻¹ indicates that there is likely an sp³C-H functional group somewhere in the molecule. The "sp³" designation means that this is a single bond because these atoms have 4 orbitals available (s + p + p + p) for hybridizing, meaning only single bonds are possible.
Help me pleaseeeeeeeee
Answer:
Make life easy for your customers and they are more likely to come back and buy again.
Explanation:
For example, you have to hire the right talent. You don't want somebody on the job that doesn't know how to do anything.
Number of molecules in .99 mol C6H5NO2
Answer:
5.96 * 10^23 molecules
Explanation:
Don't start counting up the number of CsHsNs and Os there are Counting up the atom ions will get a wrong answer. The question is asking for the number of molecules. That means you do not break down each molecule to find the number of molecules. You modify 1 mol to find out how many molecules are in 0.99 mols. Do that using a proportion.
1 mol contains 6.01 * 10^23 molecules
0.99 mol contains x
1/0.99 = 6.02 * 10^23 / x molecules
x = 0.99 * 6.02 * 10^23
x = 5.96 * 10^23
How many moles of zinc, Zn, are in 1.31×1024 Zn atoms?
Answer:
=7.89013× 10^47 moles of zinc
Explanation:
1 atom contains 6.023×10^23 moles.
1.31×10^24 atoms of zinc contain6.023×10^24×1.31×10^.24
