Complete this table relating the values of Ecell and ΔG to the Q/K ratio

Q/K Ecell ΔG
<1

=1
>1
Drag these labels into table as appropriate:

>0, =0, <0

Solution C is the one that has the highest acidity. Solution B has been the most basic, whereas Solution A has been the least acidic.

The given solutions in the compound has been:

Solution A = pOH = 1.5

Solution B = pOH = 7

Solution C = pOH = 13.5

The pH can be defined as the hydrogen ion concentration in the solution. The pH can be given as:

pH = 14 - pOH

pH of solution A has been:

pH = 14 - 1.5

pH = 12.5

The solution has thus been basic.

pH of solution B has been:

pH = 14 - 7

pH = 7.

The solution has been neutral.

pH of solution C has been:

pH = 14 - 13.5

pH = 0.5

The solution has been highly acidic.

Solution C has proven to be the most acidic. The least acidic solution has been solution A since it is more basic and so less acidic, while solution B has been the most basic.

To know more about ph of solution

https://brainly.com/question/15289741

#SPJ4

3.08 g of NaCl should be added to 0.35 L of a 0.15 M solution of AgNO3 so that it reacts completely with the silver to form AgCl(s).

Solution is a process or action that is used to resolve a problem or issue. Solutions can be found through brainstorming, analysis, research, trial and error, and experimentation.

To calculate how much NaCl should be added to a 0.35 L solution of 0.15 M AgNO3 to completely react with the silver to form AgCl(s), we need to use the stoichiometric ratio of the reactants. The reaction of AgNO3 and NaCl is:
AgNO3 + NaCl → AgCl(s) + NaNO3
The ratio of AgNO3 to NaCl is 1:1, so we need to add an equal amount of moles of NaCl as AgNO3.
To calculate the moles of AgNO3, we need to use the following equation:
Moles = (Concentration)(Volume)
Moles of AgNO3 = (0.15 M)(0.35 L) = 0.0525 moles
Since we need an equal amount of moles of NaCl, we can calculate the amount of NaCl needed as:
NaCl = (0.0525 moles)(58.44 g/mol) = 3.08 g
Therefore, 3.08 g of NaCl should be added to 0.35 L of a 0.15 M solution of AgNO3 so that it reacts completely with the silver to form AgCl(s).

To learn more about solution
https://brainly.com/question/28564792
#SPJ1

The presented statement indicates that the heat of evaporation is 126.2 KJ/mol.

Common compounds that sublime easily include cardamom, camphor, dry ice, iodine, and the example below. In the scientific, sublimation is occasionally employed as a technique for the purification of solids, such as caffeine.

Direct solid-to-gas sublimation

PI3(s)  ---> PI3 (g)   is  equation for sublimation

Heat of sublimation =  dH of reaction = dH PI3 ( g) - PI3 (s)

Thus we nee to first find PI3( g)  enthalphy of formation

The reaction is   P (g) +  ( 3/2) I2  ( g)  ---->  PI3 (g)

Enthaphy of reaction  =  Bond energies of bonds broken - bond energies of bonds formed

= 3/2  BE ( I-I)   -  3 BE ( P-I)   =  ( 3/2) 151 - 3( 184)   =  -325.5 KJ

Now for reaction   dH reaction = dH products - dH reactants

- 325.5 = dH ( PI3 g) - dH ( P) -  3/2 dH ( I2)

-325.5 = dH ( PI3 g)   - 334 - ( 3/2) ( 62)

dH ( PI3 g) = 101.5 KJ /mol

Now  heat of sublimation  dH =  dH ( PI3 g) - dH ( PI3 s)  =  101.5 - ( -24.7)  = 126.2 KJ/mol

To know more about Sublimation visit:

https://brainly.com/question/16789108

#SPJ4

Elements in the each column possess similar chemical and physical properties.

Periodic table is organized in several different ways, most notably by increasing the atomic number. Because the elements are arranged by atomic number, and they are lined up in columns. Elements in each of the column will possess chemical and physical properties. The main three categories of elements are: metals, nonmetals as well as metalloids. Elements share some physical and chemical properties like: Ductility, Solids at room temperature, It has shiny luster, Conducts electricity and it form  positively charged ions (cations) as they tend to lose negative electrons easily in the chemical reactions.

To know more about elements here

https://brainly.com/question/13025901

#SPJ4

Answer: Upon successive breakage into smaller cubes, each time by halving the sides, the volume remains constant while the surface area increases dramatically. The total area of all cubes at each iteration is the red dot on the continuous line plot of area/volume.

Explanation: Hope this helps

Answer:

The total volume is the same and the total surface area doubles.

Explanation:

We know that the total volume for the large cube and the total volume for the small cubes is the same but that the surface area for the smaller cubes is double that of the large cube. So the volume-to-surface-area ratio is as to for the large cube and as to two for the small cubes. The smaller cubes are much more reactive than the large cube because of this ratio. And that is why nanoparticles are so reactive and so useful to us because of this large surface area and very small particles.

The molecular formula would be [tex]C_{3} H_{3}[/tex]. An empirical formula is a compound's chemical formula that only specifies the ratios of the elements it contains and not the precise number or arrangement of atoms.

Empirical formulas reveal the simplest or most reduced ratio of components in a compound, while chemical formulas reveal how many atoms of each element are present in a complex. The empirical formula and the chemical formula of a substance are identical if the chemical formula can no longer be lowered.

Formula for a molecule: (Empirical formula)* n

Thus, a whole number multiple of the empirical formula mass must be the molecular mass.

Here, 39 = 3* (12+1) is evident.

so Molecular Formula = [tex]C_{3} H_{3}[/tex]

Learn more about empirical formula

brainly.com/question/11588623

#SPJ4

Coal combustion produces more greenhouse gases than the combustion of any other fossil fuel

Explanation:

There are a handful of coal types, but almost all contribute substantially more CO2 into the air than other fossil fuels upon combustion.

For the atoms that do not follow the octet rule state electrons surround these atoms are 2,6,4,4,8.

The octet rule states that atoms tend to have 8 electrons in their valence shell in order to achieve a stable electron configuration. However, some atoms deviate from this rule:

NNO: Nitrogen monoxide, also known as nitric oxide, has only 2 electrons in its outermost shell.

NBF3: Boron trifluoride has only 6 electrons in its outermost shell.

NICl2: Nitrogen dichloride has only 4 electrons in its outermost shell.

NOPBr3: Nitrogen tribromide has only 4 electrons in its outermost shell.

NXeF4: Xenon tetrafluoride has only 8 electrons in its outermost shell.So the answer would be 2, 6, 4, 4, 8 respectively.

Learn more about octet rule here:

https://brainly.com/question/865531

#SPJ4

Moles of NaF form from 4.0 mol Na is

Firstly we have to find the limiting reagent for this

moles of Na = 4 moles/2 moles = 2 moles

moles of F2 = 2.5 moles/1 moles = 2.5 moles

In chemistry, the mole, also written mol, is a standard scientific unit for the calculation of large amounts of very small entities, such as atoms, molecules, or other objects

So, from here we can see that Na is the limiting reagent so product will be determined by this

2 moles of Na give 2 moles of NaF

1 moles will give 1 moles of NaF

4 mole will give 4 moles of NaF

Hence, Moles of NaF form from 4.0 mol Na is 4 moles

Learn more about Moles here:

https://brainly.com/question/15356425

#SPJ1

Answer:

4 moles

Explanation:

Start superscript, plus, and finish superscript moments can occur in the concentration gradient that the sodium creates. The atomic number of sodium is 11 and its symbol is Na.

Which comes from the Latin word natrium. It is a highly reactive, silvery-white, pliable metal. Sodium is an alkali metal in group 1 of the periodic chart. Its only stable isotope is Na. The free metal cannot be found in nature, so it must be prepared from compounds. The sixth most common element in the Earth's crust, sodium, is found in many minerals, including feldspars, sodalite, and halite (NaCl). Uses, Chemical Composition, and Physical Properties of Sodium Sodium is an atomic number 11 chemical element with the symbol Na.

Learn more about compounds here

https://brainly.com/question/13516179

#SPJ4

The answer is A produces a decrease in the entropy of the system

A)  we know that entropy is the measure of randomness. if randomness increases entropy also increases.

 entropy order of substances  : solid  <  liquid  < gas

here conversion of liquid to solid means randomness decreases . so that entropy decreases

B)  [tex]liquid \rightarrow gas\: conversion[/tex] . so entropy is increases

C)  dissolution of LiOH. that means  LiOH molecules distributed more randomly in the solution so more disorder and more entropy

D)  ice melting means : solid to liquid so entropy also increases

E) gas mixing means more disturbed in the gases more disturb will leads to more randomness and more entropy

Learn more about entropy.

brainly.com/question/13146879

#SPJ4

The standard enthalpy of formation can be ΔH fo[A] = 433 KJ/mol.

This equation essentially states that the standard enthalpy change of formation is equal to the sum of the standard enthalpies of formation of the products minus the sum of the standard enthalpies of formation of the reactants. and the standard enthalpy of formation values: ΔH fo[A] = 433 KJ/mol. Enthalpy of formation is the enthalpy change for the formation of 1 mol of a compound from its component elements, such as the formation of carbon dioxide from carbon and oxygen. The formation of any chemical can be as a  reaction from the corresponding elements:

elements→compound

Learn more about standard enthalpy:

brainly.com/question/28303513

#SPJ4

The overall equation for this reaction is: 2-Chloro-3,3-dimethylpentane + Br2 → 2-Bromo-3,3-dimethylpentane.

A reaction is a type of response that occurs when two or more substances interact with each other.

The compound shown below is 2-chloro-3,3-dimethylpentane.
When 2-chloro-3,3-dimethylpentane reacts with Br2 in CH2Cl2, a substitution reaction takes place. The chlorine atom on the carbon atom of the compound is replaced with a bromine atom, and the product formed is 2-bromo-3,3-dimethylpentane. The mechanism of this reaction is shown below.
Step 1: Br2 attacks the carbon atom of the alkane and breaks the C-Cl bond.
Step 2: A bromonium ion is formed which leaves the bromine atom on the carbon atom of the alkane.
Step 3: The bromonium ion is attacked by another molecule of Br2 and a new C-Br bond is formed.

The overall equation for this reaction is: 2-Chloro-3,3-dimethylpentane + Br2 → 2-Bromo-3,3-dimethylpentane

To learn more about reaction
https://brainly.com/question/25769000
#SPJ4

It will raise the concentration of OH- (aq), which will cause equilibrium to move in the other direction, causing the concentration of OH- (aq) to fall in order to restore balance.

The Latin term libra, which signifies weight or balance, is where the word equilibrium first appeared. Equilibrium can be visualized as an interesting story that is currently in rest. a vehicle that is going steadily. a chemical process where both the forward and backward rates of reaction are equal.

[tex]NH3(aq) + H2O (l) < === > NH4+ (aq) + OH- (aq)[/tex]

NaOH is added to system [tex]: NaOH (aq) === > Na+ (aq) + OH- (aq)[/tex]

(i) It will raise the concentration of OH- (aq), causing equilibrium to shift in a way that lowers the conc of OH- (aq) to attain equilibrium again: thus equilibrium will shift towards reactants (Left) .

(ii) Q[tex]= [OH-] [NH4+]/ [NH3] [H2O][/tex]

with increase in concentration of OH- (aq) (stress) ,value of Q​​​​​​​ will increase, since OH- appear in numerator .

(iii) Before equilibrium is re-established, rate of reverse reaction will exceed forward reaction, not vice-versa. As conc. of OH-(aq)decreases in towards reactants.

(iv) When equilibrium is re-established, rate of reverse reaction will be equal to rate of forward reaction, to maintain equilibrium.

To know more about Equilibrium visit :

https://brainly.com/question/29901689

#SPJ4

Answer:

Explanation:

Answer: (a) Formation of liquid droplets above the solution is not an indication that a chemical reaction has occurred.

1.) [Ru(CN)6]3-  2.) [Cr(CN)6]3-  3.) [Co(H2O)6]3+  4.) [CrCl6]3- are the order of octahedral splitting energy.

In the presence of ligands, the degenerate d-orbital splits into the levels eg and t2g. The presence of ligands is what causes this splitting. The energy difference between the two levels (eg and t2g) is known as the crystal-field splitting energy, or 0. This phenomenon is known as crystal-field splitting.

The crystal field splitting energy (o), which is the difference between the energies in an octahedral complex, varies in size depending on the charge on the metal ion, where the metal is located in the periodic table, and the type of ligands used.

To know more about splitting energy visit-

https://brainly.com/question/1589515

#SPJ4

In the given question, a pair of compounds that has same empirical formula is  [tex]\rm CH_3\ and\ C_2H_6[/tex]. Option a is the correct choice.

The term "compound" refers to two or more elements joined together such that the elements have lost their individual identity in favor of a new set of properties.

For [tex]\rm C_2H_6[/tex], the empirical formula can be calculated as follows:

- Divide the molar mass of each element by its atomic weight to get the number of moles of each element:

[tex]\rm C =\dfrac{ 2 }{ 12} = 0.167[/tex]

[tex]\rm H =\dfrac{ 6 }{1 }= 6.[/tex]

- Divide each number of moles by the smallest number of moles to get the simplest whole-number ratio:

[tex]\rm C = \dfrac{0.167 }{0.167}= 1[/tex]

[tex]\rm H = \dfrac{6 }{0.167} = 36[/tex]

- The empirical formula for  [tex]\rm C_2H_6[/tex] is [tex]\rm CH_3[/tex].

For [tex]\rm CH_3[/tex], the empirical formula is also [tex]\rm CH_3[/tex].

Therefore, pair of compounds that have the same empirical formula is option a.[tex]\rm CH_3\ and\ C_2H_6[/tex], since both have the empirical formula of [tex]\rm CH_3[/tex].

Learn more about compound here:

https://brainly.com/question/14117795

#SPJ12

In terms of increased polarity, the bonds should be in the following order: H-C, H-N, and H-O.

Atoms in molecules are held together by chemical bonds. Electrostatic forces between negatively charged electrons and positive charge atomic nuclei give rise to bonds.

I.) Cl-F = 3.98-3.16 = 0.82

Br-Cl = 2.96-3.16 = 0.2

Cl-Cl = 3.16-3.16 = 0

Therefore Cl-F > Br-Cl > Cl-Cl

II.) H-C = 2.55-2.2= 0.35

H-N = 3.04-2.2 = 0.84

H-O = 3.44-2.2 1.24

Therefore, H-O > H-N > H-C is the correct order

III.) Br-F = 2.96-3.980=1.02

I-F = 3.98-2.66 = 1.32

Cl-F = 3.98-3.16= 0.82

Therefore I-F > Br-F > Cl-F

IV.) Si-Cl = 3.16-1.90 = 1.26

Si-P = 2.19-1.9 = 0.29

Si-C = 2.55-1.9 = 0.65

Si-F = 3.98-1.9 = 2.08

Therefore Si-F > Si-Cl > Si-C > Si-P

Hence, only second (II) order is correct.

To know more about bond visit :

https://brainly.com/question/10777799

#SPJ4

The term best describes the flow of electrons and protons from one place to another is the electric current.

The electric current is describes as the flow of the electrons from the one place to the another place. The flow of the electrons in the wire or in the solution. The electricity defined the direction of the flow of the electrons. The direction of the movement of the electrons between the atoms is called as the electric current.

The unit of the electric current is the ampere. There are the two kinds of the electric current is direct current and the alternating current.

To learn more about electrons here

https://brainly.com/question/3174055

#SPJ4

The reaction between menthyl chloride and a strong base results in a single elimination product, 2-methylpropene, and a chloride ion.

Reaction is the process of responding to an event, action, or stimulus. It can be physical, emotional, mental, or a combination of all three.

Menthyl Chloride + Strong Base -->
Product 1: 2-Methylpropene + Chloride Ion
The reaction between menthyl chloride and a strong base results in a single elimination product, 2-methylpropene, and a chloride ion. This occurs because menthyl chloride has an allylic hydrogen, which can be abstracted by the strong base. This results in the formation of a carbocation intermediate, which then undergoes an E2 elimination reaction to form the desired product, 2-methylpropene.

Neomenthyl Chloride + Strong Base -->
Product 1: 2-Methylpropene + Chloride Ion
Product 2: 3-Methylpropene + Chloride Ion
The reaction between neomenthyl chloride and a strong base results in two elimination products, 2-methylpropene and 3-methylpropene, and a chloride ion. This occurs because neomenthyl chloride has two allylic hydrogens, which can be abstracted by the strong base. This results in the formation of two carbocation intermediates, which then undergo E2 elimination reactions to form the desired products, 2-methylpropene and 3-methylpropene.

To learn more about reaction
https://brainly.com/question/27300160
#SPJ4

Due of their propensity to create ionic connections by giving up electrons, group 2 elements all share this trait. option (d) is correct.

The negatively charged particles known as electrons revolve around the outer edges of the nucleus. For scientists, it can be challenging to monitor them because of how quickly they spin. The tiniest particles in an atom, you can put 20,000 of them inside a proton, they are drawn to the positive ion of the protons.

Same-group electrons have similar chemcial and physical characteristics. Group-2 is the alkaline earth metals which have tendency to lose two electrons to form the M+2 types of metal ions as after losing two electrons they get the Noble gas configuration.

Since they tend to lose electrons therefore they will form ionic bond with non-metals and results to form the ionic compounds.

To know more about Electrons visit :

https://brainly.com/question/5365825

#SPJ4

The Complete Question :

what do all group 2 elements have in common? (2 points) group of answer choices

(a) they all gain two electrons to form a stable outer energy level.

(b) they form covalent bonds with halogens.

(c) they all react easily with the noble gases

(d) they tend to form ionic bonds by losing electrons.

Due of their propensity to create ionic connections by giving up electrons, group 2 elements all share this trait.

Thus, they tend to form ionic bonds by losing electrons, this is the correct option.

The negatively charged particles known as electrons revolve around the outer edges of the nucleus. For scientists, it can be challenging to monitor them because of how quickly they spin. The tiniest particles in an atom, you can put 20,000 of them inside a proton, they are drawn to the positive ion of the protons.

Same-group electrons have similar chemical and physical characteristics. Group-2 is the alkaline earth metals which have tendency to lose two electrons to form the M+2 types of metal ions as after losing two electrons they get the Noble gas configuration.

Since they tend to lose electrons therefore they will form ionic bond with non-metals and results to form the ionic compounds.

To know more about electrons refer to:

brainly.com/question/5365825

#SPJ4

Thioether (CH3SCH3) acts as Lewis base and BF3 acts as Lewis acid.

Any hydrogen-containing material that has the ability to donate a proton (hydrogen ion) to another chemical is considered an acid. A base is a molecule or ion that can take up an acid's hydrogen ion. Typically, sour tastes help to identify acidic chemicals.

Acidity happens when the kidneys are unable to eliminate an excess of acid produced by the gastric glands in the stomach. It frequently occurs with indigestion, reflux, and heartburn. Acidity is typically brought on by eating too spicy food, drinking coffee, eating too much, and eating a low-fiber diet.

To know more about acid visit-

https://brainly.com/question/29796621

#SPJ4

BC point in cooling curve represents condensation until the bubble temperature is reached at C.

Drawing two straight lines connecting the data points above and below the freezing point allows one to infer the solution's freezing point from the graph. The freezing point of the solution is the temperature that corresponds to the point where the two lines converge.

The transition from a solid to a liquid requires much less energy than the reverse. This is a result of the significant particle separation in the gaseous state. The magnitude of the intermolecular forces influences the values of the temperatures of fusion and vaporisation.

Learn more about cooling curve here:

brainly.com/question/12505139

#SPJ4

The correct chemical formula for the ionic compound formed when the cation Ag (silver) combines with the anion SO2 (sulfite) is AgSO2. This compound is an ionic salt containing positively charged silver cations and negatively charged sulfite anions.

The correct chemical formula for the ionic compound formed when the cation Mg (magnesium) combines with the anion SO2 (sulfite) is MgSO2. This compound is also an ionic salt containing positively charged magnesium cations and negatively charged sulfite anions.

Both AgSO2 and MgSO2 are white solids at room temperature and are soluble in water. They are both used in industrial applications such as in the production of fertilizers and detergents.

Learn more about chemical formula:

https://brainly.com/question/11574373

#SPJ4

Thus, we can infer that 4.3 g of methane is the least amount of methane that could remain after the chemical reaction.

Colorless, odorless, and extremely combustible gas is methane (CH4). It is made of hydrogen and carbon. According to the US Environmental Protection Agency, it is also a powerful greenhouse gas, which means it contributes to increasing heat and so has an impact on climate change.

The digestive processes in termites and emissions from marshes and oceans are two of the main natural sources of methane. Human-related sources include growing rice, constructing landfills, keeping cattle and other reproductive animals (cow burps! ), and producing energy.

The given reaction is:

CH_4+2O_2→CO_2+2H_2 O

The number of moles equals the mass divided by the molar mass, as is well known. Methane has a molar mass of 16 g/mol.

Hence, No of moles = mass/molarmass

=12.8g/16g/mol

=0.8mol

Oxygen has a molar mass of 32 g/mol.

Hence, its number of moles = mass/molarmass

=75g/32g/mol

=2.34mol

One mole of methane requires two moles of oxygen, as the reaction demonstrates.

Thus, 2.34 moles of oxygen are required for every 0.493 moles of methane, or 4.68 moles total.

just 2.34 moles of oxygen are available for the process. Therefore, oxygen is the limiting reagent.

Therefore, 2.34 moles of oxygen demand the following amount of methane.

2.34/2=1.17 moles

So, 0.225 moles of methane is equal to 1.17×16=18.72g

As 18.72 g of methane and oxygen combine. As a result, the remaining methane is computed as follows.

(18.72g-12.8g) = 5.92g

Consequently, 5.92g is the minimal mass of methane.

To know more about Methane visit:

https://brainly.com/question/2127750

#SPJ4

The theoretical yield of salicylic acid according to the balanced overall equation is found to be 1.6g.

The maximum mass of a product that can be produced in a chemical process is known as the theoretical yield. The balanced chemical equation can be used to calculate it. the limiting reactant's mass and relative formula mass. The percent yield is 100% if the theoretical and actual yields are equal. Because the real yield is frequently lower than the theoretical value, percent yield is typically lower than 100%.

Molar mass methyl salicylate = 152 g/mole

moles methyl salicylate present = 1.77 x 1/152= 0.0116 moles

Theoretical yield of salicylic acid = 0.0116 x 138g/mol = 1.6g of salicylic acid

Learn more about salicylic acid here:

brainly.com/question/14635153

#SPJ4

The electron-bearing carbon atom in both methylene (-CH2-) and ethyl (-C2H5) structures has a formal charge of zero.

The formal charge is a method used to predict the electron distribution in atoms of a molecule, which can be calculated by subtracting the number of valence electrons of the free atom from the number of electrons assigned to the atom in the Lewis structure.In the case of methylene, which is a fragment of a hydrocarbon with the chemical formula -CH2- has 2 valence electrons, it shares one electron with each of the two hydrogen atoms, so the carbon atom has a formal charge of zero. In the case of ethyl, which is a fragment of a hydrocarbon with the chemical formula -C2H5, it has 5 valence electrons, it shares one electron with each of the five hydrogen atoms, so the carbon atom has a formal charge of zero.The electron-bearing carbon atoms in both methylene and ethyl have a formal charge of zero because they have a complete octet of valence electrons, which indicates a stable electronic configuration.

Learn more about formal charge here:

https://brainly.com/question/11723212

#SPJ4

The number of moles of a salt in a solution is the product of its volume in liter and molarity. Hence, number of moles of potassium bromide, KBr, are in 0.250 L of a 2.00 M solution is 0.5.

Molarity of a solution is the ratio of the number of moles of its solute to the volume of solution in liter.

To determine the number of moles of potassium bromide (KBr) in a 0.250 L of a 2.00 M solution, we can use the formula:

moles = concentration x volume

where concentration is in units of moles per liter (M), and volume is in liters (L).

Substituting the given values into the formula, we get:

moles = 2.00 M x 0.250 L

          = 0.500 mol

Therefore, there are 0.500 moles of KBr in 0.250 L of a 2.00 M solution.

Find more on molarity :

https://brainly.com/question/8732513

#SPJ2

Answer:

0.5

Explanation:

Acellus

This shows water cannot pass through the substance because it is so saturated. Consult an imaginary chemistry guidebook when you come across a solid whose ksp value in water at 258°C is to be zero.

In chemistry, a solution may reach a state of saturation after being examined for solutions and solution characteristics. The solution is in this stage when there isn't any more room for the solute to be added. Any chemical substance that has been postulated but has not yet been found, isolated, or manufactured is considered to be hypothetical (identified or shown to exist). Some hypothetical compounds cannot form at all. This shows how water cannot pass through the substance because it is so impenetrable.

Learn more about compounds here

https://brainly.com/question/12166462

#SPJ4

Answer:

The molecular formula will be a whole number multiple of the empirical formula.

The molar mass of the empirical formula (CH4N) is 12 + 4 + 14 = 30 g/mol.

60.0 g/mol ÷ 30 g/mol = 2

Molecular formula = C2H8N2