Answer:
MAC address
Explanation:
When Computer 1 wants to send a packet to Computer 2, it first checks the ARP (Address Resolution Protocol) table for the corresponding MAC address that matches the gateway IP. The ARP table is a cache table stored in a computer's memory that maps IP addresses to their corresponding MAC addresses. The gateway IP is the IP address of the router on the local network that connects to other networks, such as the Internet. By checking the ARP table for the corresponding MAC address that matches the gateway IP, Computer 1 can determine the physical address of the router and send the packet to the correct destination.
Computer 1 wants to send a packet to Computer 2. Since computer 2 is not on the local network, Computer 1 checks the ARP table for the corresponding MAC address that matches the gateway IP.
What is MAC address?An exclusive identification code given to a network interface controller to be used as a network address in communications inside a network segment is called a media access control address.
Ethernet, Wi-Fi, and Bluetooth are just a few of the IEEE 802 networking technologies that frequently employ this application.
MAC addresses come in three different types: Unicast, Multicast, and Broadcast. Take a quick glance at the first byte to determine which address type you are reading.
Computer 1 desires to transmit Computer 2 a packet. Computer 1 searches the ARP table for the associated MAC address that matches the gateway IP because Computer 2 is not a part of the local network.
Thus, answer is MAC address.
For more details regarding MAC address, visit:
https://brainly.com/question/27960072
#SPJ2
a procedure to shut down the computer network so the operating system can be replaced is a , whereas a procedure to close the store at the end of each evening is a .
A procedure to shut down the computer network so the operating system can be replaced is a Shutdown procedure, whereas a procedure to close the store at the end of each evening is a Closing procedure.
What is process shutdown system?The automatic isolation and activation of every component of a process is known as process shutdown (PSD). The process is still under pressure during a PSD. PSD mostly consists of field-mounted sensors. A system logic unit for processing incoming signals, trip relays, valves, alarms, and MHI units are also included.
System shutdown gets the system to a point where it is secure to turn the computer off. The user is then informed that the computer can be shut off when all file-system buffers have been flushed to the disk.
Emergency shutdown systems, often known as ESDs, are employed in hazardous locations to prevent circumstances that could have disastrous repercussions on the economy, the environment, or operational efficiency.
To learn more about System shutdown refer :
https://brainly.com/question/8313830
#SPJ4
In the three-box information processing model, what is the first place memories are stored?A. short-term memoryB. eidetic memoryC. semantic memoryD. sensory memoryE. procedural memorywww.crackap.com
Sensory memory are the first place memories stored in the three-box information processing model.
What is Sensory memory?Sensory information is ingested by sensory receptors and processed by the nervous system at every moment of an organism's existence. Short-term memory receives sensory information from sensory memory and temporarily stores it there.
Traditional human senses include sight, hearing, taste, smell, and touch. After the initial stimulus has stopped, people can still remember their impressions of sensory information thanks to sensory memory (SM). A typical example of SM is when a young child can write letters and make circles at night by twirling a sparkler.
The sparkler appears to leave a trail that forms a continuous image when spun quickly enough. This "light trail" is the picture that is stored in the iconic memory visual sensory store.
Learn more about Sensory memory
https://brainly.com/question/6365987
#SPJ4
to switch chart rows and columns, we can click anywhere in the chart containing the data series that we want to plot on different axes, click on the design tab in chart tools, then in the data group, and finally click switch row/column. True or false?
False. To switch chart rows and columns, click anywhere in the chart containing the data series that we want to plot on different axes, click on the Design tab in Chart Tools, then in the Data group, and finally click Switch Row/Column.
What is data series?Data series is a sequence of data points, usually in chronological order. It is used to measure changes in data over time and to analyze trends or patterns. Data series can be used in many different fields, such as economics, finance, and statistics. Data series are typically presented in charts, graphs, or tables. They are used to compare past and present data in order to project the future, make predictions, or draw conclusions. Data series can also be used to identify relationships between two or more variables. For example, a data series can be used to compare the sales of a particular product in different cities over time.
To learn more about data series
https://brainly.com/question/29379129
#SPJ4
you obtain your applications and updates in rpm format.which of the following distributions is your system based on?
The distribution of your system is likely to be Red Hat Enterprise Linux (RHEL). RHEL is a popular Linux distribution that uses RPM packages for application installation and updates.
What is Linux
Linux is used in many different applications, including web servers, mobile phones, embedded systems, and supercomputers. It is also popular for use in desktops and laptops, where it can be used for many different tasks such as web browsing, word processing, and gaming. Linux is also popular for use in cloud computing and other distributed computing applications.
Linux is highly secure and reliable, making it a great choice for many different types of applications. It is also highly customizable, allowing users to modify the operating system to suit their needs. Additionally, many popular applications, such as Apache and MySQL, are available for use on Linux.
To know more about Linux
https://brainly.com/question/15122141
#SPJ4
7) suppose we want to choose a number at random between 0 and 9, allowing any number between 0 and 9 as the outcome (like 0.84522 or 7.1111119). calculator and computer random number generators will do this. the sample space of this random process is the entire interval of values between 0 and 9 on the number line. if we define y
The random module's randint() function can be used to produce a random integer between 0 and 9. In between 0 and 9, print the produced random integer.
How do you get a random number from 0 9 in Python?We'll demonstrate how to create random integers in Python that range from 0 to 9 in this article. There are several ways to do this challenge, which are listed below:The randint() methodUsing the randrange() functionUsing the secrets modulePython has a wide number of routines for producing random integers in certain ranges. The built-in random module of Python will be covered in this section.Randint() and randrange are the two main methods that the random module offers to generate random integers (). Another module named secrets is additionally utilized to generate random values.The randint() method
An integer with a random value within the given range is returned by the random.randint() method.The steps to follow to complete the desired goal are listed in the algorithm below.Import the random module using the keyword import.The random module's randint() function can be used to produce a random integer between 0 and 9.In between 0 and 9, print the produced random integer.Example
The random.randint() method is used in the software that follows to produce a random number between 0 and 9.To Learn more About random module refer TO:
https://brainly.com/question/20693552
#SPJ4
fill in the blank: when using growth-driven design, you can experience____ , ___ , ____and _____ compared to traditional web design.
Simply said, growth-driven design (GDD) is an effective and efficient way to create a website.
Which of the following best sums up the use of user research in growth-driven design?The entire GDD technique makes use of user research, but the strategy stage and the plan step of the continuous improvement stage are where it's most frequently applied.
A growth-driven business is what?Although a developing company may seem relentless in its efforts to attract new clients, the goal and driving force behind these initiatives is profit development, not client satisfaction. Customer service for both new and returning customers is a top priority for a business that is focused on growth.
To know more about website visit:-
https://brainly.com/question/19459381
#SPJ4
in microsoft excel, if you are asked to plot volume of gas as a function of the temperature of the gas, which values should be entered on the left column?
In microsoft excel, if you are asked to plot volume of gas as a function of the temperature of the gas, the left column should contain the temperature values.
What is microsoft excel?Microsoft Excel is a powerful spreadsheet application used to store, analyze, and manipulate data. It is developed and marketed by Microsoft, and is part of the Microsoft Office suite of programs. Excel is used by businesses, students, and individuals to make calculations, create graphs and charts, and organize data. Excel is capable of sorting, filtering, formatting, and organizing data as well as create macros and formulas. It is a great tool for data analysis and data visualization. Excel also allows users to import data from external sources such as databases, websites, and text files.
To learn more about microsoft excel
https://brainly.com/question/14317943
#SPJ4
which version of the ftp server is running on the target system? submit the entire banner as the answer.
220 Microsoft FTP Service version of the ftp server is running on the target system.
Which version of the ftp server is running on the target system?The answer to the question of which version of the FTP server is running on the target system is the entire banner displayed when connecting to the FTP server. The banner typically contains information about the FTP server, including the version number. The banner will look something like this: "220 Welcome to FTP Server X.X.X". The number after "FTP Server" is the version number.For example, if the banner displayed when connecting to the target system's FTP server is "220 Welcome to FTP Server 5.7.1", then the server is running version 5.7.1 of the FTP server. It is important to obtain the exact version number of the FTP server running on the target system, as this information is necessary for any vulnerability assessments or patch management.In addition to the version number, the banner may also include other information, such as the name of the FTP server software, the type of encryption used, and the operating system the server is running on. This information can be useful when troubleshooting issues or performing other server-related tasks.In summary, the answer to the question of which version of the FTP server is running on the target system is the entire banner displayed when connecting to the FTP server. This banner typically contains the version number of the server software, as well as other information that can be useful when troubleshooting or performing other server-related tasks.To learn more about version of the ftp server refer to:
https://brainly.com/question/27610307
#SPJ4
in order to build a player, go to player settings to resolve the incompatibility between the color space and current settings
It is the ideal colour space for use with digital devices like tablets and smartphones as well as computer screens. As a result, sRGB is the standard colour space.
How to resolve incompatibility between color space and current settings?Go to "Player Settings" and under "Player/Other Settings," adjust "Color Space" to "Gamma" if you receive a warning about a conflict between the colour space and your current settings. Once the compatibility issue has been resolved, click "Build", choose a folder on your computer, and then start publishing. You can customise a number of settings for the Unity-built game's final product using the Player Settings (menu: Edit > Project Settings > Player).
In order to depict realistically, linear colour space is the preferable option. Gamma Color Space is the default in Unity. To open the item in Photoshop, double-click the associated object icon. Once you've done that, select Edit>>>Assign profile and change the colour profile to Working RGB/sRGB. (This can alter the image's colour; however, you can simply apply adjustment layers to correct it.)
To learn more about Player settings refer to :
https://brainly.com/question/29544964
#SPJ4
Sidney needs to create a decimal number variable that will be added to another number. What kind of variable is required?
A.
binary
B.
Boolean
C.
string
D.
float
Float is required, to create a decimal number variable that will be added to another number, hence option D is correct.
What is float?There is a decimal point in decimal numbers. Out of all the available data types, the float data type is the one that stores decimal numbers.
The float must be used since the number must be utilized in other calculations. despite the fact that the numbers can be stored in strings, they cannot be used in additional calculations.
Therefore, if Sidney needs to create a decimal number variable that will be added to another number, the float is required.
Learn more about float, here:
https://brainly.com/question/13441316
#SPJ1
TRUE OR FALSE while software vendors generally provide evaluation or demonstration copies of their products, hardware vendors never provide evaluation products because of the expense of hardware.
While software vendors generally provide evaluation or demonstration copies of their products, hardware vendors never provide evaluation products because of expense of hardware. (True)
What is a hardware?The physical components of a computer, such as its internal components and connected external devices, make up its hardware. A computer's calculations, data storage, input processing, and output are all carried out by hardware components. Hardware is any tangible component of a computer that you can physically touch.
All hardware devices, whether internal or external, have chips on a circuit board that serve a purpose. All hardware must be able to communicate with the rest of the computer, typically by plugging into a port, socket, or wireless radio. After that, hardware components will also have additional components that help them perform their function, such as buttons, sensors, protective cases, or even cooling fans to prevent overheating.
Learn more about hardware components
https://brainly.com/question/24231393
#SPJ4
your boss has given you a task that includes multiple deadlines and requires the coordination of various team members. which of the following microsoft applications could be used to manage this? visio project access evernote
Micro soft Project, Visio, and Access could all be used to manage this task. Evernote is not a Micro soft application and would not be suitable for this task.
What is micro soft application?
Micro soft applications are software programs created by Micro soft Corporation. These applications are used to accomplish a variety of tasks, such as word processing, data analysis, and presentations. Some of the most popular Micro soft applications include the Microsoft Office Suite, which includes the Micro soft Wo rd, Ex cel, and Power Point programs. Micro soft also offers a variety of other applications, including Outlook, S kype, and Sw ay. Micro soft applications are available for both Windows and Mac operating systems. They can be purchased individually or as part of a package. Micro soft applications are widely used in both personal and professional settings.
To learn more about micro soft application
https://brainly.com/question/30135894
#SPJ4
Below is the International Morse Code, where each letter is made up of a unique combination of dots and dashes.
This code is an example of what type of encoding?
Answer: Morse code is a type of character encoding that transmits telegraphic information using rhythm. Morse code uses a standardized sequence of short and long elements to represent the letters, numerals, punctuation and special characters of a given message.
Explanation:
You have installed a package called mathpac with apt-get. After a system upgrade, the package is not working correctly.
Which of the following commands is the MOST correct method to get the package to work?1. apt-get upgrade mathpac
2. apt-cache
3. aptitude
4. upgrade
upgrade apt-get The MOST accurate way to make the package work is with mathpac. Software is not created using the tool from the source code.
The apt-get command is described.The Advanced Package Utility (APT) library can be accessed using the command line tool apt-get (a package management system for Linux distributions). You can use it to find, download, manage, update, and uninstall software.
How do I use apt-get to install packages?By using the "apt-get" command with the "install" option when the package is immediately accessible in the default repositories, you can install it. To install new packages on your system, you must have sudo capabilities. You might be prompted to confirm that you want to install this package on your system.
To know more about Software visit:-
https://brainly.com/question/1022352
#SPJ4
You have an Azure subscription that contains the following resource groups:
RG1 in the Central US region
RG2 in the East US region
RG3 in the West US region
In RG1, you deploy a virtual machine scale set named VMSS1 in the West US region.
You need to deploy a new Azure virtual machine named VM1 and add it to VMSS1.
To which resource group can you deploy VM1?
Select only one answer.
RG1 only
RG3 only
RG1 or RG3 only
RG1, RG2 or RG3
RG1 only right answer....
True or False, diagnostics led error codes in an alienware notebook don't always supersede the led indication for low battery indication
False. The LED error codes in an Alienware notebook will always supersede the LED indication for low battery indication.
What is error code?Error codes are numerical values that are assigned to specific errors that occur when using computer software or hardware. They are typically used to help identify the cause of the error and provide potential solutions to help solve the problem. Error codes provide a way of quickly identifying the source of an issue and can help save time in troubleshooting and resolving the error. They are also used in software development to help identify and fix bugs before releasing a product.
To learn more about error code
https://brainly.com/question/23591228
#SPJ4
Integer variables totalflowers and numflowers are read from input. a bouquet consists of numflowers flowers, and the number of flowers is given by total flower's. assign remaining flowers with the remaining flowers after making as many bouquets as possible. ex: if the input is 13 4, then the output is:
The C++ language programme for integer variables is available here. The input is read to determine totalflowers and numflowers. Flowers, such as numflowers, make up a bouquet.
#include <iostream>
using namespace std;
int main(){
int totalFlowers;
int numFlowers;
int remainingFlowers;
cin >> totalFlowers;
cin >> numFlowers;
// your code here //
remainingFlowers = totalFlowers%numFlowers;
cout<<"Remaining flowers: " << remainingFlowers << endl;
return 0;
}
High-performance apps may be made using the cross-platform language C++.
Bjarne Stroustrup created C++ as an addition to the C language.
Programmers have extensive control over memory and system resources thanks to C++.
In 2011, 2014, 2017, and 2020, the language underwent four significant updates, becoming C++11, C++14, C++17, and C++20.
One of the most widely used programming languages worldwide is C++.
Operating systems, graphical user interfaces, and embedded devices all use C++ today.
Learn more about Language here:
https://brainly.com/question/28266804
#SPJ4
Power comes into your factory at 480 volts AC. You must design a new power circuit to power three office computers.
What do you need in order to convert the incoming power to what the computers require?
A. A transformer
B. A relay
C. A GFCI
D. A generator
In order to convert the incoming power to what the computers require, a transformer is used. The correct option is A.
What is a transformer?To avoid wasting energy, the magnetic field between the primary and secondary coils is guided by the transformer's core.
The secondary coil's electrons are compelled to move once the magnetic field enters it, using electromotive force to produce an electric current (EMF). A transformer is to be used to provide power for a computer disk drive.
Therefore, the correct option is A. A transformer is used to convert the incoming power to what the computers require
To learn more about transformers, refer to the link:
https://brainly.com/question/27797829
#SPJ1
which of the following are ways to prevent email phishing attacks against user passwords? select all that apply.
Use a password manager are ways to prevent email phishing attacks against user passwords.
What is phishing attacks?Phishing attacks are a type of cyber attack that use social engineering techniques to deceive victims into revealing sensitive information such as usernames, passwords, and credit card details. Attackers typically use email, text, or web links to lure victims into clicking on malicious links and entering their personal information. Phishing attacks can also be disguised as legitimate businesses, government agencies, or other trusted organizations to encourage victims to enter their credentials. Attackers often use spoofing techniques to make it harder for victims to detect the malicious activity. To protect against phishing attacks, users should be wary of suspicious emails, text messages, and web links. Additionally, they should be sure to verify the identity of the sender before entering any personal information.
To learn more about phishing attacks
https://brainly.com/question/30115315
#SPJ4
Print numbers 0, 1, 2, ..., userNum as shown, with each number indented by that number of spaces. For each printed line, print the leading spaces, then the number, and then a newline. Hint: Use i and j as loop variables (initialize i and j explicitly). Note: Avoid any other spaces like spaces after the printed number. Ex: userNum = 3 prints:
0
1
2
3
import java.util.Scanner;
public class NestedLoop {
public static void main (String [] args) {
Scanner scnr = new Scanner(System.in);
int userNum;
int i;
int j;
userNum = scnr.nextInt();
/* Your solution goes here */
}
}
A loop is a control flow statement that allows a certain piece of code to be executed repeatedly a specified number of times or until a certain condition is met.
What are the types of loop?There are different types of loops in programming languages such as for loops, while loops, do-while loops, and for-each loops.
They are used to iterate through data structures such as arrays and lists, perform repetitive tasks, and control the flow of a program.
Loops are an essential tool for efficient and efficient coding.
The sample code is as follows:
import java.util.Scanner;
public class NestedLoop {
public static void main (String [] args) {
Scanner scnr = new Scanner(System.in);
int userNum;
int i;
int j;
userNum = scnr.nextInt();
for(i = 0; i <= userNum; i++){
for(j = 0; j < i; j++){
System.out.print(" ");
}
System.out.println(i);
}
}
}
To learn more about while loop refer to:
https://brainly.com/question/14390367
#SPJ4
A user is connected to a docking station with an optical drive and is trying to back up personal files to removable media, but is encountering write errors. Which of the following is MOST likely cause of the errors?O The disk has already been finalized
O The files are encrypted
O There is a corrupt file on the hard drive
O The files are not compatible with the type of disk used
In computing, a docking station or port replicator (hub) or dock provides a simplified way to plug-in a mobile device, such as a laptop, to common peripherals.
What is docking station?A mobile device's port count can be increased with office docking stations. This allows you to expand the capabilities of the mobile device without compromising mobility by connecting new peripherals or devices.
You're ready to go once you plug your laptop into the docking station and insert the HDMI or DisplayPort wire from your monitor into the socket on the dock. The process is the same for USB-C monitors: first, use USB-C to connect your monitor to the dock, then use the dock to attach the laptop.
Thus, using two docking stations will be successful. view the docks for Android and Apple. a base station that transforms a laptop into a desktop computer. The keyboard, mouse, monitor, and printer are permanently plugged into a laptop rather than having to connect various peripherals to it in order to make it desktop-ready.
To learn more about docking station refer to :
https://brainly.com/question/14410659
#SPJ4
A user is connected to a docking station with an optical drive & is trying to back up personal files to removable media, but is encountering write errors. The disk has already been finalized is most likely the cause of the errors. Thus, option A is correct.
What is docking station?Office docking stations enable a mobile device's port count to be increased. Through the addition of new peripherals or devices, you can increase the mobile device's capabilities without sacrificing mobility.
The moment your laptop is connected to the docking station and the HDMI or DisplayPort cable from your monitor is inserted into the corresponding socket on the dock, you are ready to use the device. The steps are the same for USB-C monitors: first, use USB-C to connect your monitor to the dock, then use the dock to connect the laptop.
Consequently, it will be successful to use two docking stations. a look at the Apple and Android docks an adapter base station that turns a laptop into a desktop computer.
To learn more about docking station refer to :
brainly.com/question/14410659
#SPJ4
internet access became faster and more widely available due to large-scale adoption of broadband technology. True Or false
Since broadband technology has been extensively used, internet connection has gotten quicker and more accessible.
What is broadband technology?Broadband is a phrase used to describe high-speed Internet connectivity that is always active and quicker than dial-up access. Several high-speed transmission techniques are part of broadband, including: Subscriber Digital Line (DSL)
Broadband connections come in four flavours: DSL, Cable, Fiber Optics, and Satellite. A broadband connection is a high-speed internet connection that is quicker than the standard dial-up access over PSTN in the context of internet access (Public Switched Telephone Network).
The way that broadband operates is very different. It distributes the phone line into numerous channels as opposed to treating it as a dialup connection, which treats the phone line as a single, constrained pipe between your computer and the ISP's computer. These channels allow for the parallel streaming of information.
Read more about broadband technology:
https://brainly.com/question/19538224
#SPJ4
Define a function named SortVector that takes a vector of integers as a parameter. Function SortVector() modifies the vector parameter by sorting the elements in descending order (highest to lowest). Then write a main program that reads a list of integers from input, stores the integers in a vector, calls SortVector(), and outputs the sorted vector. The first input integer indicates how many numbers are in the list.
Ex: If the input is:
5 10 4 39 12 2
the output is:
39,12,10,4,2,
For coding simplicity, follow every output value by a comma, including the last one.
Your program must define and call the following function:
void SortVector(vector & myVec)
Answer:
Here is an example implementation of the SortVector function and main program in C++
(Picture attached)
The SortVector function takes in a vector of integers by reference (indicated by the & symbol) and sorts the elements in descending order using the std::sort function from the algorithm library. The greater<int>() function is used as the comparison function to sort the elements in descending order.
we have detected unusual transactions on your account and recharging is currently unavailable for security reasons. you can contact customer support for details. tiktok
Go to the Support link, select your country, then a product. If you don't see one that handles your issue then keep experimenting with selections until you reach one that gets you a telephone call and get the representative to redirect you.
What is a link?An element of a chain is a link, or hyperlink in computing. Each piece of metal that forms a link in a chain is made up of many pieces.
The word "link" is now used in a novel way by people. Multiple types of Web pages make up the World Wide Web on the Internet. We can access other pages quickly and easily thanks to the computer programme (HTML) that is used to create these pages.
A word or image can be displayed on a web page as a link at the request of the person who created it. In other words, the computer will display the new page we want to see when we use our mouse to click the link.
Learn more about World Wide Web
https://brainly.com/question/20341337
#SPJ4
what is the proper format for a single line comment in karel? question 27 options: this is a comment // this is a comment /* this is a comment this is a comment
In Karel, the proper format for a single line comment is '// '. Therefore, correct answer option to this question is A: '// this is a comment.'
In Karel, a single line comment is written using two backslashes such as "//" . A single line comment starts and ends at the same line. Single-line comments allow programmers tp provide description about code only one line at a time.
Different programming languages use different symbol or sign to represent a single line comment. However, in Karel the symbol used to represent a single line comment is '//'.
You can learn more about single line comment at
https://brainly.com/question/24131343
#SPJ4
encryption your wireless data prevents anyone who might be able to access your network from viewing it
True, encryption your wireless data prevents anyone who might be able to access your network from viewing it
What is wireless data?A technology called wireless data communication sends signals through the atmosphere using the radio spectrum. It can be used on LANs or WANs in one- or two-way networks and can carry analogue or digital signals.
Different radio spectrum segments are used by specific wireless data communication applications and technologies to transmit signals (between the frequencies of 30 Hz and 300 GHz).
With radio waves, intended distances can range from a few metres for Bluetooth to millions of kilometres for deep-space radio communications. It includes various forms of fixed, mobile, and portable applications like two-way radios, cellular phones, personal digital assistants (PDAs), and wireless networking.
Learn more about wireless data
https://brainly.com/question/6875185
#SPJ4
TRUE/FALSE. globalization is the trend in which buying and selling in markets has increasingly crossed national borders.
True. Globalization is the trend of increased economic, social, and cultural exchange and integration between countries and societies, which has led to increased buying and selling across international borders.
What is Globalization?Globalization is the process of increased interconnectedness between countries and their citizens through the growth of international trade, communication, immigration, and cultural exchange. It is a process that has increased the interdependence of nations, economies, and peoples around the world. Globalization has had a major impact on the way people live and work, as well as on the environment. It has enabled people to access a wider range of products, services, and information, while also making it easier to move capital and labor across national boundaries. At the same time, however, it has also created new challenges, such as environmental degradation, inequality, and global health issues. Globalization has the potential to lift millions out of poverty and create jobs, but it also carries risks, such as the threat of economic downturns and the displacement of workers.
To learn more about Globalization
https://brainly.com/question/30169341
#SPJ4
The following query
SELECT c.CustomerName AS Customer, b.CustomerName AS BilledToCustomer
FROM Sales.Customers b
JOIN Sales.Customers c ON b.CustomerID = c.BillToCustomerID
is an example of:
a) Left Outer Join
b) Cross Join
c) Right Outer Join
d) Self Join
Regardless of whether they match entries in the Order T Table, all Customer T Table rows.
What is T Table?The critical values of t are listed in the Student's t table, which serves as a reference. Also known as the t table, t-distribution table, t-score table, t-value table, or t-test table, the student's t table is a statistical analysis tool. Finding the crucial values for a confidence interval when the data is roughly normally distributed is the most typical application of the t-distribution. To get the corresponding p-value for a statistical test using the t-distribution (t-tests, regression analysis). A high t-score, sometimes referred to as a t-value, indicates that the groups are different, whereas a low t-score indicates that the groups are similar.Degrees of freedom are the values in a study that are open to change and are crucial for determining the significance and reliability of the null hypothesis.
The complete question is:
The following code would include:
SELECT Customer_T.CustomerID,CustomerName, OrderID
FROM Customer_T LEFT OUTER JOIN Order_T ON
Customer_T.CustomerID = Order_T.CustomerID;
a) all rows of the Order_T Table regardless of matches with the Customer_T Table.
b) only rows that don't match both Customer_T and Order_T Tables.
c) all rows of the Customer_T Table regardless of matches with the Order_T Table.
d) only rows that match both Customer_T and Order_T Table
To learn more about T Table, refer to:
https://brainly.com/question/26724171
#SPJ4
1
a) Using VLSM, give a scheme to divide a class C into four subnets where the required host numbers are: 100, 55, 20, 30. can VLSM be used? Explain the answer.
(b) If the numbers of required hosts are 100, 50, 50, and 20, can VSLM be used?
Explain the answer
Answer:
Explanation: (a) Yes, VLSM can be used to divide a Class C address into four subnets. To do this, we would start by subnetting the Class C address with a /27 subnet mask. This would give us 32 subnets, each with 30 hosts. We can then use the remaining two subnets to create the required networks. To create a network with 100 hosts, we would use a /25 subnet mask, giving us two subnets each with 126 hosts. For the network with 55 hosts, we would use a /26 subnet mask, giving us four subnets each with 62 hosts. To create a network with 20 hosts, we would use a /28 subnet mask, giving us 16 subnets each with 14 hosts. Finally, to create a network with 30 hosts, we would use a /27 subnet mask, giving us 32 subnets each with 30 hosts.
(b) Yes, VSLM can be used if the numbers of required hosts are 100, 50, 50, and 20. VSLM is a network design method that uses a hierarchical approach to divide an IP address space into smaller subnets. In this case, the number of hosts required for each subnet can be determined by dividing the total number of hosts by the number of subnets. For example, the first subnet can be assigned 100 hosts, the second subnet can be assigned 50 hosts, the third subnet can be assigned 50 hosts, and the fourth subnet can be assigned 20 hosts. Thus, VSLM can be used to divide the IP address space into smaller subnets based on the number of required hosts.
Just to be clear I picked this answer from somewhere. I hope this helps you.
Using the data for the JC Consulting database shown in Figure 2-1 and your answers from the previous question, which tables would need to be involved if you wanted to create a query that showed the EmployeeID and LastName fields from the Employees table as well as all TaskID and Description fields from the TaskMasterList table that were related to that employee?
To create a query that shows the EmployeeID and LastName fields from the Employees table as well as all TaskID and Description fields from the TaskMasterList table that were related to that employee, the Employees table and TaskMasterList table would need to be involved.
A join would need to be performed on the EmployeeID field in the Employees table and the EmployeeID field in the TaskMasterList table to link the related tasks to the correct employee.
What is the query about?To create a query that shows the EmployeeID and LastName fields from the Employees table as well as all TaskID and Description fields from the TaskMasterList table that are related to that employee, we need to use data from both the Employees table and the TaskMasterList table.
The Employees table contains information about the employees, such as their EmployeeID and LastName. The TaskMasterList table contains information about tasks, such as the TaskID and Description.
Therefore, To link the tasks to the correct employee, we need to use a join. A join is a SQL operation that combines rows from two or more tables based on a related column between them. In this case, we would use the EmployeeID field in the Employees table and the EmployeeID field in the TaskMasterList table as the related column. This join would return only the rows from both tables where the EmployeeID values match.
Learn more about query from
https://brainly.com/question/25694408
#SPJ1
