consider a cold canned (typically cylindrical in shape) drink left on a table. would the heat transfer be steady or transient? would you model the heat transfer as one-, two-, or three-dimensional? also, which coordinate system would you use to analyze this heat transfer problem?

The range of the wavelengths for the sound over the audible range of frequencies in room temperature is from 24 meters to 18×10⁻³ meters.

The relation between velocity , wavelength and frequency of a sound is given by the following equation :

⇒ V = λ x ν        where, V stands for the velocity of the sound, λ stands for the wavelength, and ν stands for frequency of the sound. To find wavelength, we have to put ν on the left side of the equation which gives us :

λ = V/ν

Velocity of the sound at room temperature ≈ 360m/s

For 15 hertz, Wavelength =  V/ν

= 360/15

=24 meters

For 20,000 hertz, Wavelength = V/ν

= 360/20000

=18×10⁻³ meters

Therefore, the audible range of wavelengths is from 24 meters to 18×10⁻³ meters.

Learn more about Sound waves here,

https://brainly.com/question/15085890

#SPJ4

Yes, that is correct. The World Meteorological Organization (WMO) has recognized a temperature of 56.7 °C (134.1 °F) recorded on July 10, 1913, at Furnace Creek Ranch in Death Valley, California, USA, as the highest temperature ever reliably recorded on Earth. This record was set during a period of intense heat in the region and remains the subject of some debate and scrutiny by scientists due to the quality of the recording equipment used at the time.

In order to foster worldwide collaboration in meteorology, the study of the Earth's atmosphere and its phenomena, and allied geophysical disciplines, the United Nations has established the World Meteorological Organization (WMO). It was founded in 1950, and Geneva, Switzerland, serves as its corporate headquarters.

The WMO's goals are to encourage the growth and use of meteorology for the benefit of humanity and to make it easier for its member nations to exchange meteorological and related information. National meteorological and hydrological services are given direction and support by it, which enables them to build better weather forecasting and warning systems as well as methods for dealing with the effects of weather-related disasters and climate change.

The World Meteorological Organization (WMO) is in charge of a number of significant global projects and programs, such as the World Weather Watch, which gathers and disseminates meteorological information and forecasts globally, and the Global Atmosphere Watch, which tracks changes in the composition of the Earth's atmosphere and their effects on climate and the environment.

For the measurement of weather and climate variables, the WMO also upholds a number of international standards and norms. It also plays a significant role in advancing scientific research and capacity building in developing nations.

To know more about World Meteorological Organization (WMO), visit:

https://brainly.com/question/29237050

#SPJ4

Yes, that is correct. The World Meteorological Organization (WMO) has recognized a temperature of 56.7 °C (134.1 °F) recorded on July 10, 1913, at Furnace Creek Ranch in Death Valley, California, USA, as the highest temperature ever reliably recorded on Earth.

In order to foster worldwide collaboration in meteorology, the study of the Earth's atmosphere and its phenomena, and allied geophysical disciplines, the United Nations has established the World Meteorological Organization (WMO). It was founded in 1950, and Geneva, Switzerland, serves as its corporate headquarters.

The WMO's goals are to encourage the growth and use of meteorology for the benefit of humanity and to make it easier for its member nations to exchange meteorological and related information. National meteorological and hydrological services are given direction and support by it, which enables them to build better weather forecasting and warning systems as well as methods for dealing with the effects of weather-related disasters and climate change.

The World Meteorological Organization (WMO) is in charge of a number of significant global projects and programs, such as the World Weather Watch, which gathers and disseminates meteorological information and forecasts globally, and the Global Atmosphere Watch, which tracks changes in the composition of the Earth's atmosphere and their effects on climate and the environment.

For the measurement of weather and climate variables, the WMO also upholds a number of international standards and norms. It also plays a significant role in advancing scientific research and capacity building in developing nations.

This record was set during a period of intense heat in the region and remains the subject of some debate and scrutiny by scientists due to the quality of the recording equipment used at the time.

To know more about World Meteorological Organization (WMO), visit:

brainly.com/question/29237050

#SPJ4

The moon is decreasing in light between a full moon and a last quarter moon called waning.

Describe about moon?
Moon is the satellite of Earth and the only natural satellite of Earth. It is the fifth-largest natural satellite in the Solar System. It orbits around Earth in an elliptical path and takes 27.3 days to complete one revolution. It is made up of different types of rocks and dust and has no atmosphere. Its surface is covered with impact craters, mountains, valleys, and lava-filled plains. It also has frozen water at the poles. The moonlight is reflected sunlight and the light of the moon changes its shape throughout the month due to its changing position with respect to the Earth and the Sun. It is the Earth's only natural satellite and the most visible object in the night sky.

Therefore, The moon is decreasing in light between a full moon and a last quarter moon called waning.

To learn more about moon

Here: https:brainly.com/question/27353113

#SPJ4

Gas to liquid is the  phase change represents a decrease in entropy.

option B

The measurement of randomness or disorder in a system is known as entropy.

As for the order of entropy, The increase in disorder causes the entropy to rise when we transition from the solid state to the liquid state to the gaseous state. Entropy will decrease when we transition from a gaseous state to a liquid state and then a solid state because chaos is becoming less disorganized. Entropy rises for options 1, 3, and 4. whereas the entropy falls in option 2. Entropy is the measurement of the amount of thermal energy per unit of temperature in a system that cannot be used for productive labor. Entropy is also a measure of molecular disorder since work is produced by ordered molecular motion.

To know more about entropy on

https://brainly.com/question/864622

#SPJ4

The speed of the ball as it swings through this point is   a) 23.8 m/s

    b) 0

The most crucial scientific notion is measurement. A variety of measurable quantities are quantified using base or physical fundamental units.. One such quantifiable metric is speed, which calculates the ratio between the distance an item travels and the time needed to cover that distance. Let's explore speed in-depth in this session. Given that it just has a direction and no magnitude, speed is a scalar quantity.

a) The ball deviates from a straight line course due to the strain in the rope, which counteracts the effects of gravity. Last year's acceleration is

 a =[tex]\frac{ T -mg}{m}[/tex] = 2g = [tex]\frac{v^2}{r}[/tex]. . . . m is mass

 v = [tex]\sqrt(2gr)[/tex]= [tex]\sqrt{(2\times9.8 \times29 )} = \sqrt{(568.4 m^2/s^2)}[/tex]

 v ≈ 23.8 m/s a rough estimate of the ball's speed at the low point

b) The acceleration needed to cause the ball to veer from its horizontal course is determined using the same procedure.

 a =   a =[tex]\frac{ T -mg}{m}[/tex] = [tex]\frac{ mg -mg}{m}[/tex]= 0

and the velocity is  v = [tex]\sqrt{(ar)[/tex] = 0 . . . . . speed of the ball where the rope is vertical

Learn more about speed

brainly.com/question/28224010

#SPJ4

The value of the resistance r is 20.25 ohms.

The value of the resistance r is calculated by applying Ohm's law as shown below.

Ohm's law states that the current flowing in a circuit is directly proportional to the voltage across the circuit.

V = IR

where;

P = IV

I = P / V

I = ( 32 W ) / ( 24 V + 12 V )

I = 0.889 A

R = V/I

R = ( 24 + 12 ) / ( 0.889 A )

R = 40.5 ohms

The value of each resistance, r is calculated as;

r = 40.5 ohms / 2

r = 20.25 ohms.

Learn more about resistance here: https://brainly.com/question/17563681

#SPJ1

In any interaction between objects, the total momentum of the objects before the interaction is equal to the total momentum of the objects after the interaction.

Conservation of momentum is a fundamental law of physics that states that the total momentum of a system of objects is conserved if no external forces act on the system.

During a collision, momentum is transferred between the objects involved in the collision. According to the law of conservation of momentum, the total momentum of the objects before the collision is equal to the total momentum of the objects after the collision. This means that the momentum of the system as a whole is conserved.

To know more about the momentum, here

brainly.com/question/15095150

#SPJ4

Answer:

11.33 km/min

Explanation:

170km ÷ 15min = 11.33km/min

The connection of kinetic energy and potential is demonstrated by this animated roller coaster created by WGBH. When the coaster cars travel around the track's loop and ascend and descend the hills.

Describe kinetic.

Those who are learning English Kinetic is defined as being related to or pertaining to the motion of physical objects, including the forces that cause those motions. Kinetic energy: of or pertaining to the energy and energy involved in the motion of physical objects.

What is the kinetic energy relationship?

She was the initial person to publish the kinetic energy relationship. This implies that an object traveling at twice the speed will strike twice as forcefully. The energy an object has as a result of motion is known as kinetic energy in physics. It is described as the effort required to move a mass-determined body from rest to the indicated velocity.

To know more about kinetic visit:

https://brainly.com/question/26472013

#SPJ1

The correct option is D. 3690s They can hare afford to nap if he does not want to lose the race.

D= 1000m

[tex]V_T[/tex]= 0.27 m/s

[tex]T_t=\frac{1000}{0.27} = 3703.7sec[/tex]

[tex]T_h = \frac{100}{15}[/tex][tex]= 6.7sec[/tex]

[tex]T_t = 7+ t_n +t_h[/tex]

[tex]3703.7 = 7+t_n +6.7\\t_n = 3703.7- 13.7\\t_n = 3690sec[/tex]

The pace is measured as the ratio of distance to the time wherein the distance is turned into a blanket. the pace is a scalar quantity because it has the most effective course and no importance. For the size of the pace in vehicles, speedometers are used. pace also can be calculated with the assistance of a graph. the space-time graph allows know-how of the rate of an object.

In regular use and in kinematics, the rate of an object is the value of the change of its position over the years or the importance of the alternate of its function per unit of time; its miles as a result a scalar amount. the spot pace is the limit of the common pace because the period of the time c program language period approaches 0. pace isn't always similar to velocity.

To learn more about Speed visit here:

brainly.com/question/28224010

#SPJ4

The two factors that determine gravitational attraction are mass and distance.

Gravitational force is the force of attraction between two objects that is directly related to their mass and the distance between them. It is one of the four fundamental forces of nature, along with the electromagnetic force, weak nuclear force, and strong nuclear force. The gravitational force is responsible for keeping planets in orbit around the sun, for holding the Earth and moon in their respective orbits, and for keeping the moon spinning on its axis.

The gravitational force between two objects is determined by the product of their masses and the inverse square of their distance. This can be expressed mathematically as: F = G (m1m2) / d², where F is the gravitational force, G is the gravitational constant, m1 and m2 are the masses of the two objects, and d is the distance between them. As the distance between two objects increases, the force of gravitational attraction between them decreases.

To learn more about gravitational
https://brainly.com/question/72250
#SPJ1

By combining the additional resistors in a certain combination that is then placed in series with the original resistor, he achieves the desired resistance which is expressed as follows:

1- Resistors in series: when  [tex]R_{1}, R_{2}, R_{3}[/tex]​, ...... several resistors when are connected in series, the sum of the individual resistances gives the equivalent resistance [tex]R_{eq}[/tex]​:

​[tex]R_{eq}[/tex] = [tex]R_{1} + R_{2} + R_{3} + ........[/tex]

2- Resistors in Parallel: when [tex]R_{1}, R_{2}, R_{3}[/tex]​​, ...... several resistors when connected in parallel, the sum of the reciprocals of the individual resistances is the reciprocal of the equivalent resistance​ [tex]R_{eq}[/tex] :

[tex]\frac{1}{R_{eq} } = \frac{1}{R_{1} } +\frac{1}{R_{2} } + \frac{1}{R_{3} } +.... (2)[/tex]

There are four​ ways to connect the three additional resistors in series with the original resistor.

The first way​ is if all the resistors are in series. The equivalent resistance of the new circuit is then found in Equation (1):

[tex]R_{eq} = R+R + R + R \\ = 4R[/tex]

The second way​ is if all the additional resistors are in parallel. The three resistors in the blue rectangle are in parallel and their equivalent resistance is from Equation(2):

[tex]\frac{1}{R_{eq} } = \frac{1}{R} + \frac{1}{R} + \frac{1}{R} \\ R_{eq} = \frac{R}{3}[/tex]

The R/3 and R resistors are in series and their equivalent resistance is ind from Equation (1):

[tex]R_{eq} = \frac{R}{3} + R\\ = \frac{4}{3} R[/tex]

The third way is if two resistors from the additional resistors are in parallel and the third one is in series with the combination. The two resistors in the blue rectangle are in parallel and their equivalent resistance is found in Equation (2):

          [tex]\frac{1}{ R_{eq}} = \frac{1}{R} + \frac{1}{R} \\ R_{eq} = \frac{5}{2} R[/tex]

The two R resistors and the R/2 resistor  are in series and their equivalent resistance is found in Equation(1):

[tex]R_{eq} = \frac{R}{2} + R + R\\ = \frac{5}{2}R[/tex]

The fourth way is if two resistors from the additional resistors are in series and the third one is in parallel with the combination. The two resistors in the blue rectangle are in series and their equivalent resistance is ind from Equation(1):

[tex]R_{eq} = R + R\\ = 2R[/tex]

The 2R and R resistors are in parallel and their equivalent resistance is found in Equation (2):

[tex]\frac{1}{R_{eq} } = \frac{1}{2R} + \frac{1}{R}\\ R_{eq} = \frac{(2R)R}{2R + R}\\[/tex]

[tex]= \frac{2R^{2} }{3R} \\ =\frac{2}{3} R[/tex]

The 2R/3 and R resistors are in series and their equivalent resistance is found in Equation (1):

[tex]R_{eq} = \frac{2R}{3} + R\\ = \frac{5}{3}R[/tex]

Therefore, there is no combination possible that would make the equivalent resistance of the circuit [tex]\left \ {{7} \atop {3}} \right. R[/tex]  and the expressed situation is impossible.

To learn more about resistance,

brainly.com/question/28135236

#SPJ4

If the force required to pull the two separate blocks at constant speed is F, then the force required to pull the two stacked blocks at a constant speed will be 2F.

When two blocks are tied together and pulled across a level surface with friction, the force required to pull them at constant speed is determined by the frictional force between the blocks and the surface. Let's call this force F.

When one block is stacked on top of the other, the total mass of the two blocks is now doubled, but the contact area between the blocks and the surface remains the same. As a result, the frictional force between the blocks and the surface will also double, since it is proportional to the normal force (the force perpendicular to the surface), which is equal to the weight of the blocks. Therefore, the force required to pull the two stacked blocks at a constant speed will be twice the original force F required to pull the two separate blocks.

In other words, if the force required to pull the two separate blocks at constant speed is F, then the force required to pull the two stacked blocks at a constant speed will be 2F.

For more such questions on Force: brainly.com/question/13191643

#SPJ4

The angular frequency of the oscillations is 3.126 rad/s.

To find the angular frequency of the oscillations, we need to use the formula:

ω = √(k/m)

where ω is the angular frequency, k is the spring constant, and m is the mass attached to the spring.

First, let's find the spring constant k. According to Hooke's law, the force F applied to a spring is proportional to its displacement x from its equilibrium position, and the constant of proportionality is the spring constant k:

F = -kx

where the negative sign indicates that the force is in the opposite direction to the displacement. We can rearrange this equation to solve for k:

k = -F/x

where F is the weight of the mass attached to the spring, which is given by:

F = mg

where m is the mass of the object and g is the acceleration due to gravity. Therefore, we have:

k = -(mg)/x

Substituting the given values, we get:

[tex]k = -(0.5 kg)(9.81 m/s^2)/(0.2 m)[/tex]

= -24.525 N/m

Next, we need to find the new equilibrium position of the mass after it is pulled down by an additional 0.1 m. Since the spring is initially stretched by 0.2 m, the total displacement from the rest position is 0.2 m + 0.1 m = 0.3 m. Therefore, the new equilibrium position is 0.3 m below the original rest position.

Now, we can find the angular frequency of the oscillations using the formula:

ω = √(k/m)

where m is the mass of the object. Since the mass is the same as before, we have:

ω = √(k/m)

= √(-24.525 N/m / 0.5 kg)

= 3.126 rad/s

Therefore, the angular frequency of the oscillations is 3.126 rad/s.

Learn more about angular velocity, here:

https://brainly.com/question/29557272

#SPJ1

The wavelength of the light producing the fringe pattern is  (2 * 0.237 mm) / 798 = 0.00059mm.=590nm

To solve for the wavelength of the light producing the fringe pattern, we can use the formula:

wavelength = (2 * distance moved by mirror M2) / (number of fringes shifted)

Plugging in the values given, we get:

wavelength = (2 * 0.237 mm) / 798 = 0.00059 mm=590nm

Therefore, the wavelength of the light producing the fringe pattern is 0.00059 mm.

In a Michelson interferometer, a beam of light is split into two parts by a semi-transparent mirror called a beam splitter. One part of the beam travels to a fixed mirror, while the other part of the beam travels to a movable mirror. The two reflected beams recombine at the beam splitter and create an interference pattern that can be observed. By moving the movable mirror, the phase difference between the two beams changes, causing the interference pattern to shift. By measuring the number of fringes shifted and the distance the mirror is moved, it is possible to determine the wavelength of the light.

To learn more about wavelength, refer:

https://brainly.com/question/17161594

#SPJ4

Answer:

The efficiency of a simple machine such as an inclined plane will decrease if the plane is made steeper. This is because a steeper plane requires more force to lift the same load, leading to a greater loss of energy due to friction and other sources of inefficiency. A gentler slope allows the force applied to the load to be spread out over a greater distance, reducing the force required to lift the load and therefore increasing the overall efficiency of the machine.

Explanation:

ALLEN

In wireless systems, wavelength is often expressed in metres (m), centimetres (cm), or millimetres (mm). Wavelength is typically represented by the Greek symbol lambda (λ).

The wavelength is the separation between the corresponding points of two succeeding waves, and is equal to the speed (v) of a wave train in a medium divided by its frequency (f). When two points or particles are referred to be "corresponding points," it means that they are both in the same phase and have completed exactly the same portions of their periodic motion. Typically, the wavelength of transverse waves—those whose points advance at right angles to one another—is measured from crest to crest or from trough to trough; for longitudinal waves—those whose points advance in the same direction—the wavelength is measured from compression to compression or from rarefaction to rarefaction.

Learn more about Wavelength here:

https://brainly.com/question/7143261

#SPJ4

The exterior or housing, the audio reception and speaker system, the picture tube, and a complicated mass of electronics including cable.

Antennae input and output devices, a built-in antenna in most sets, a remote control receiver, and computer chips, make up the four main sets of parts that make up a television.

Typically, in addition to coaxial cable, HDMI, and other audio-video connectors, smart TVs also enable Ethernet, WiFi, USB, Bluetooth, and flash memory cards from digital cameras.

Therefore, the TV consists of exterior, audio reception, speaker system, and picture tube.

Learn more about TV, here:

https://brainly.com/question/24030285

#SPJ9

A system is at rest. The mass of each object is shown. Neglecting the mass of the strings, the number of forces that are acting on the 6 kg block is option B. There are 2 forces

The system is at rest, so the forces acting on the 6 kg block must be balanced. Since the only forces acting on the block are the tensions in the strings, there must be two forces acting on the block. The correct answer is B. There are 2 forces.

Therefore, the mass of each object is shown. Neglecting the mass of the strings, the number of forces that are acting on the 6 kg block is option B. There are 2 forces.

learn more about forces: https://brainly.com/question/12970081

#SPJ1

An electron behaves in ways that are at least partially indeterminate it means electron does not follow the same trajectory.

An electron is a quantum entity and a very tiny atom. The bonding of individual atoms depends heavily on electrons. The charge on the electron is adverse.

Species holding negative charge are popular by the name of" electrons" and electromagnetic field is employed to capture electrons by laboratory instruments. Several chemistry generalities are described using electrons and colorful subatomic patches.

This statement means that electrons have indeterminate geste which states that under identical conditions an electron doesn't follow the same line. Also, the electrons don't land in the same spot each time. thus, an electron behaves in ways that are at least incompletely indeterminate.

Learn more about Electrons:

https://brainly.com/question/12225628

#SPJ4

The hare can afford to nap for a maximum time of 6.67 seconds without losing the race if his speed is 15 m/s.

After running for 7 seconds, the hare has covered a distance of:

[tex]d_h = v_h * t = 15 m/s * 7 s = 105 m[/tex]

The hare is now 895 m away from the starting line and 100 m away from the finish line. The tortoise is 895 m away from the starting line and moving towards the finish line at a speed of 0.27 m/s.

The hare needs to cover a distance of 100 m to reach the finish line, while the tortoise needs to cover a distance of 895 m. If the hare takes a nap for a certain amount of time, the tortoise will continue to move towards the finish line and may eventually cross the finish line before the hare wakes up.

We can calculate the time it would take the tortoise to reach the finish line by dividing the distance by its speed:

[tex]t_t = d_t / v_t = 895 m / 0.27 m/s = 3314 s[/tex]

The hare needs to wake up and cover the remaining distance to the finish line before the tortoise does. The distance the hare needs to cover is:

[tex]d_h = 100 m[/tex]

The maximum speed of the hare is 15 m/s, which means the time it would take the hare to cover the distance is:

[tex]t_h = d_h / v_h = 100 m / 15 m/s = 6.67 s[/tex]

Learn more about speed here:

https://brainly.com/question/680492

#SPJ4

Answer:

The formula is:

v = f λ

Where,

v is the velocity or speed of the wave (in m/s)

f is the frequency of the wave (in Hz)

λ is the wavelength of the wave (in m)

We can rearrange this formula to solve for the frequency:

f = v / λ

We are given the speed and the wavelength of the wave, so we can plug them into the formula:

f = 47 m/s / 25 m

f = 1.88 Hz

To give the answer to 2 decimal places, we round it to:

f = 1.88 Hz

Therefore, the frequency of the wave is 1.88 Hz.

Explanation:

Answer:

1.88 Hz.

Explanation:

The frequency (f) of a wave is related to its speed (v) and wavelength (λ) by the equation f = v/λ.

So to find the frequency of a wave with a speed of 47 m/s and a wavelength of 25 m, we just need to substitute these values into the equation:

f = 47 m/s / 25 m

f = 1.88 Hz

Rounding to 2 decimal places, the frequency of the wave is 1.88 Hz.

The length of the string is 2.75m and the frequency of the pendulum is 0.2Hz.

Frequency is a measure of the number of cycles of a periodic wave that occur in a unit of time. It is usually expressed in Hertz (Hz), which is the number of cycles per second. The frequency of a wave determines its perceived pitch, with higher frequencies producing higher pitches and lower frequencies producing lower pitches.

a. The length of the pendulum required to achieve a period of 5 seconds can be calculated using the formula:

T = 2 * π * √(l/g)

where T is the period, l is the length of the pendulum, and g is the acceleration due to gravity (approximately [tex]9.8 m/s^2[/tex]). Solving for l:

[tex]l = (g * T^2) / (4 * π^2)[/tex]

Substituting T = 5 seconds and g =[tex]9.8 m/s^2[/tex], we get:

[tex]l = (9.8 * 5^2) / (4 * π^2)[/tex] = 2.75 meters

So the correct answer is c. 2.75 meters.

(22) b. The frequency of a pendulum is given by the formula:

f = 1 / T

where f is the frequency and T is the period. Substituting T = 5 seconds, we get:

f = 1 / 5 = 0.2 Hz

So the correct answer is d. 0.2 Hz.

Therefore, The length of the string is 2.75m and the frequency of the pendulum is 0.2Hz.

To learn more about frequency visit:

brainly.com/question/27151918

#SPJ1

The physical properties of gold, such as its malleability, ductility, and electrical/thermal conductivity, are important for making synthetic products from gold.

Physical properties are characteristics of a material that can be observed without changing the composition of the material. Examples of physical properties include color, density, hardness, electrical conductivity, melting point, boiling point, and solubility.

From a chemical perspective, gold is a relatively inert element, meaning it is resistant to oxidation and other chemical reactions. This makes it ideal for use in applications where it may be exposed to harsh environments or corrosive materials, such as medical implants and aerospace components. Additionally, gold's unique properties make it suitable for use in catalytic reactions, meaning it can speed up chemical reactions without itself being consumed or affected. This is used in a variety of industries, such as the production of pharmaceuticals, food additives, and polymers.

To learn more about physical properties
https://brainly.com/question/19921381
#SPJ1

The freezing point of the solution will decreases by the addition of the salt. The freezing point of the solution is  - 0.76 °C and boiling point increases to 100.21  °C.

The addition of a nonvolatile salt into a solvent will decrease the freezing point of the solution. Similarly the salt addition will increases the boiling point of the solution. Both are colligative properties and depends on the molality as written below:

ΔTf = Kf m

ΔTb = Kb m

Where, kb for water is 0.52 °C kg/mol and Kf is 1.86 °C kg/mol.

Molar mass of FeCl₃ = 162.3 g/mol

no.of moles in 10.6 g = 10.6 /162. 3 = 0.065 moles.

mass of water = 159 g = 0.159 kg.

molality of the solution = 0.065 mol/0.159 kg = 0.4088.

now, ΔT  = 0.186 °C kg/mol × 0.4088 = 0.76

T = 0 - 0.76 = -0.76°C (freezing point of water = 0°C ).

Similarly ΔTb  = 0.52 °C kg/mol × 0.4088 = 0.212

Tb = 100 + 0.212 = 100.21 °C (boiling point of water =100°C ).

Therefore, the freezing point of the solution is- 0.76  °C and boiling point of the solution is 100.21 °C.

Find more on freezing point depression :

https://brainly.com/question/2292439

#SPJ1

(a) The change in momentum is -12.04 kg-m/s

(b) The force exerted by the bat is 1003.33 N

The given values are :

The mass of a ball, m = 0.14 kg

Initial speed of the ball, u = 40 m/s

Final speed of the ball, v = -46 m/s

(a) The change in momentum of the ball during the collision with the bat is given by :

Change in P = m(v-u )

Change in P = 0.14(-46-40)

Change in P = - 12.04 kg-m/s

(b) Time for collision, t = 0.012 s

the force can be calculated as follows :

force = Change in P/ t

force = 1003.33 N

Learn more about force at: https://brainly.com/question/12785175

#SPJ1

Complete question:

An official major league baseball has a mass of 0.14 kg. A pitcher throws a 40 m/s fastball which is hit by the batter straight back up the middle at a speed of 46 m/s.

a) What is the change in momentum of the ball during the collision with the bat?

b) If this collision occurs during a time of 0.012 seconds, what is the average force exerted by the bat on the ball?