consider a process in which an ideal gas is compressed to one-half of its original volume at constant temperature. calculate the entropy change per mole of gas.

Benzoic acid and phenol will end up in the aqueous layer as their corresponding sodium salts.

When sodium bicarbonate (NaHCO₃) is added to a mixture of benzoic acid, phenol, and naphthalene, the compounds that end up in the aqueous layer depend on their acid-base properties and their solubility in water.

Benzoic acid and phenol are both acidic compounds and will react with the basic sodium bicarbonate to form their respective sodium salts, which are more water-soluble than the corresponding acids. Naphthalene is a non-polar compound and is not expected to react with NaHCO₃.

The reactions with NaHCO₃ can be represented as follows:

Benzoic acid + NaHCO₃ → Na benzoate + CO₂ + H₂O

Phenol + NaHCO₃ → Na phenolate + CO₂ + H₂O

Both Na benzoate and Na phenolate are more water-soluble than their respective acids and will dissolve in the aqueous layer. Therefore, benzoic acid and phenol will end up in the aqueous layer as their corresponding sodium salts.

Naphthalene, on the other hand, is not expected to dissolve significantly in water and will remain in the organic layer.

To know more about aqueous layer here

https://brainly.com/question/14356327

#SPJ4

The molarity of this saturated naoh(aq) solution  0.0142 M.The molarity (M) of a solution is defined as the number of moles of solute per liter of solution.

To find the molarity of a saturated NaOH solution with a concentration of 569 g/L, we need to first calculate the number of moles of NaOH present in one liter of the solution.

The molar mass of NaOH is 40.00 g/mol, so the number of moles of NaOH present in 569 g (or 0.569 kg) is:

moles of NaOH = (0.569 kg) / (40.00 g/mol) = 0.0142 mol

Therefore, the molarity of the saturated NaOH solution is:

Molarity = moles of NaOH / volume of solution in liters

Since we know that the volume of the saturated solution is 1 liter, we can substitute the values:

Molarity = 0.0142 mol / 1 L = 0.0142 M

So the molarity of the saturated NaOH solution is 0.0142 M.

learn more about molarity here:

https://brainly.com/question/8732513

#SPJ4

A chemical equation is a statement using chemical formulas that express both the identities and the relative amounts of the reactants and products involved in a chemical or physical change.

The relative amounts of reactants and products in a balanced chemical equation are described by a reaction's stoichiometry.

Chemical equations are statements that use symbols and formulae to explain a chemical reaction. For instance, when hydrochloric acid and sodium hydroxide solution combine, salt and water are produced along with a significant amount of heat.

Raw materials called reactants interact with one another to create products. Under the proper circumstances, such as temperature, time, or pressure, the chemical bonds of the reactants are broken, and the atoms create new bonds that lead to various combinations.

To know about reactants

https://brainly.com/question/14225536

#SPJ4

the empirical formula of the unknown organic acid is C9.5H3.55O2.5.

To find the empirical formula, we need to calculate the moles of carbon, hydrogen, and oxygen in the sample:

Moles of CO2 produced: 21.2 g CO2 x (1 mol CO2/44.01 g CO2) = 0.482 mol CO2

This represents the moles of carbon in the sample.

Moles of H2O produced: 3.25 g H2O x (1 mol H2O/18.015 g H2O) = 0.18 mol H2O

Moles of oxygen: The remaining mass of the sample after subtracting the mass of carbon and hydrogen is due to oxygen.

Mass of oxygen = 10.0 g - (21.2 g/44.01 g/mol x 12.01 g/mol + 3.25 g/18.015 g/mol x 2.02 g/mol) = 2.03 g

Moles of oxygen = 2.03 g / 16.00 g/mol = 0.127 mol

Carbon: 0.482 mol CO2 / 0.127 mol = 3.8

Hydrogen: 0.18 mol H2O / 0.127 mol = 1.42

Oxygen: 0.127 mol O2 / 0.127 mol = 1

These ratios indicate that the empirical formula is C3.8H1.42O1, but we need to convert this to a whole-number ratio. The simplest whole-number ratio is obtained by multiplying each subscript by 2.5:

C3.8H1.42O1 x 2.5 = C9.5H3.55O2.5

Therefore, the empirical formula of the unknown organic acid is C9.5H3.55O2.5.

Learn more about moles here:

https://brainly.com/question/28239680

#SPJ4

Answer: C; Replacement

Explanation: In chemistry there is an activity series which shows that some elements are allowed to replace the space of others. This is the scenario represented in this picture.

The partial pressure of each noble gases is  P(He) = 0.5420 atm, P(Ne) = 0.2932 atm and P(Kr) = 0.1648 atm.

The pressure that's wielded by one among the admixture of feasts if it occupies the same volume on its own is known as Partial pressure. Every gas exerts certain pressure in a admixture. The total pressure of a a mixture of an ideal gas is the sum of partial pressures of individual feasts in the admixture,

Dalton's Law of partial pressure,

Ptotal = P(He) + P(Ne) + P(Kr)

P(He) = X(He)*Ptotal,

P(Ne) = X(Ne)*Ptotal,

P(Kr) = X(Kr)*Ptotal

X(He)= n(He)/ntotal,

X(Ne)= n(Ne)/ntotal ,

X(Kr)= n(Kr)/ntotal

ntotal = n(He) + n(Ne) + n(Kr)

so by calculating,

n= m/M

n(He) = 5.50 g/ 4.003 g/mole = 1.374 mol

n(Ne) = 15.0 g / 20.18g/mole = 0.7433 mol

n(Kr) = 35.0 g/83.80 g/mole = 0.4177 mol

ntotal = 1.374 mol + 0.7433 mol + 0.4177 mol = 2.535 mol

P(He) = X(He)*Ptotal = (1.374 mol/2.535mol)(1 atm) = 0.5420 atm

P(Ne) = X(Ne)*Ptotal = (0.7433 mol/ 2.535 mol)(1 atm) = 0.2932 atm

P(Kr) = X(Kr)*Ptotal = (0.4177 mol/2.535 mol)*(1 atm) = 0.1648 atm

Therefore, partial pressure of gases:

P(He) = 0.5420 atm

P(Ne) = 0.2932 atm

P(Kr) = 0.1648 atm

Learn more about Partial pressure:

https://brainly.com/question/19813237

#SPJ4

Complete question:

To prevent the presence of air, noble gases are placed over highly reactive chemicals to act as inert blanketing gases. A chemical engineer places a mixture of noble gases consisting of 5.50g of He, 15.0g of Ne and 35.0g Kr in a piston cylinder assembly at STP=0 degree Celsius and 1atm. RAM: He 4.003g/mole, Ne 20.18g/mole and Kr 83.80g/mole. What is the partial pressure for each noble gas?

The chemist should observe the formation of solid copper metal, a change in color of the solution, and the disappearance of the aluminium foil through this unbalanced equation.

The balanced equation for the reaction between copper (II) chloride and aluminum is:

3CuCl2 + 2Al → 2AlCl3 + 3Cu

In this reaction, aluminum replaces copper in the copper chloride solution to form aluminium chloride and copper metal.

The likely observations when the reaction stops are:

1. The solution may change color, indicating that a chemical reaction has occurred. Copper (II) chloride is blue, while aluminum chloride is colorless.

2. Solid copper metal may form and settle at the bottom of the container, indicating that a precipitation reaction has occurred.

3. The aluminum foil may appear to have dissolved or disintegrated, as it has been consumed in the reaction.

4. The reaction mixture may become warmer due to the exothermic nature of the reaction.

To learn more about unbalanced equation Click here:

brainly.com/question/11322377

#SPJ4

Molar concentration of the FeCl2 solution is calculated as 3.947 M.

Molar concentration of the solution is defined as number of moles of solute per liter of solution.

Given, mass of FeCl2 = 225 g and molar mass of FeCl2 = 126.75 g/mol

So, moles of FeCl2 = mass of FeCl2 / molar mass of FeCl2

= 225 g / 126.75 g/mol

= 1.776 moles

Given, volume of the solution is 450 mL, or 0.45 L,

the molar concentration can be calculated by:

molar concentration = moles of FeCl2 / volume of solution

= 1.776 moles / 0.45 L

= 3.947 M

So the molar concentration of the FeCl2 solution is 3.947 M.

To know more about molar concentration, refer

https://brainly.com/question/26255204

#SPJ1

Answer:

1.777

Explanation:

To determine the number of moles of FeCl2 in the solution, we need to first convert the given mass of FeCl2 to moles using its molar mass.

Number of moles = Mass / Molar mass

Mass of FeCl2 = 225 g

Molar mass of FeCl2 = 126.75 g/mol

Number of moles of FeCl2 = 225 g / 126.75 g/mol = 1.777 moles

Therefore, the solution contains 1.777 moles of FeCl2.

When an atom of chlorine and an atom of hydrogen become a molecule of hydrogen chloride a chemical bond is formed and energy is released.

Chemical Bonding refers to the conformation of a chemical bond between two or further tittles, motes, or ions to give rise to a chemical emulsion. These chemical bonds are what keep the tittles together in the influencing emulsion.

During the bond conformation, when reactant tittles come closer to form chemical bonds, the energy is relased to minimize the aversion between the tittles.

Since the system tends to release energy when a chemical bond is established, the enthalpy change in this script will be negative.

In the implicit energy wind during the conformation of a chemical bond, the energy is negative at equilibrium distance which indicates that energy is released during the conformation of a bond.

Learn more about Bond formation:

https://brainly.com/question/863189

#SPJ4

To create photochemical smog, in addition to volatile organic compounds (VOCs), the presence of nitrogen oxides (NOx) is required. The combination of these two groups of pollutants can lead to the formation of ground-level ozone and other harmful secondary pollutants.

In addition to volatile organic compounds (VOCs), the presence of nitrogen oxides (NOx) is required to create photochemical smog. NOx is a term used to describe the family of nitrogen oxides, which include nitrogen monoxide (NO) and nitrogen dioxide (NO2), both of which are produced mainly from vehicle emissions, industrial processes, and combustion of fossil fuels.

When VOCs and NOx are emitted into the atmosphere and are exposed to sunlight, a series of complex photochemical reactions occur. This can result in the formation of ground-level ozone, a key component of photochemical smog, as well as other harmful secondary pollutants such as peroxyacetyl nitrate (PAN) and aldehydes.

Therefore, to create photochemical smog, the presence of both VOCs and NOx is necessary.

Learn more about photochemical smog here: brainly.com/question/15728274

#SPJ4

A piston confines 0.200 mol Ne(g) in 1.20 l at 25 °C . Two experiments are performed. The process does more work is the second experiment.

(a) The gas is allowed to expand through the additional 1.20 L against the  constant pressure of the 1.00atm

Irreversible path is as :

W = -Pex × ΔV

Where

Pex = 1.00 atm

ΔV = 1.20 L

W = - (1.00 atm) × 1.20 L

W = -1.20 L. atm  × 101.325 J /1 L.atm

W = -121.59 J

(b)  The gas is allowed to expand the reversibly and the  isothermally to the same final volume is as :

W = - nRT ln (V final / V initial)

Where

n = the number of moles = 0.200

R = gas constant = 8.3145 J/K.mol

T = 298 Kelvin

V final / V initial  = 2.40 / 1.20 = 2

W = - (0.200mol) × 8.3145 J/K.mol × 298K × ln(2.4/1.2)

W = - 343.5 J

Thus the second one does the more work.

To learn more about work here

https://brainly.com/question/13945379

#SPJ4

The average rate of the reaction during the time interval of 0.530 m to 0.512 m is 0.00041 M/s.

The decomposition of HBr takes place according to the reaction below,

2HBr(g) = H2(g)+ Br2(g)

a) Rate of reaction is the measure of the change in concentration of the reactants or the change in concentration of the product per unit time(seconds).

Therefore;

Rate = -1/2(Δ(HBr)/Δt = Δ(H₂)/Δt =Δ(Br₂)/Δt,

where ΔHBr is the change in concentration of HBr (reactant), ΔH₂ is the change in hydrogen concentration , ΔBr₂ is the change in bromine concentration and Δt is the change in time.

b) Average rate of reaction after 22 sec will be,

rate = -1/2Δ(HBr)/Δt

       = -1/2 (0.530 M - 0.512 M)/(22 s-0 s)

       = -1/2 (- 0.018)/22

       = 0.00041 M/s

Therefore,  the average rate of the reaction during this time interval. is 0.00041 M/s.

Learn more about Rate of reaction:

https://brainly.com/question/8773624

#SPJ4

Complete question:

Consider the reaction 2 hbr (g) à h2 (g) + br2 (g)

a. express the rate of the reaction in terms of the change in concentration of each of the reactants and products.

b. in the first 22.0 s of this reaction, the concentration of hbr dropped from 0.530 m to 0.512 m . calculate the average rate of the reaction in this time interval.

Taking into account definition of limiting reagent, H₂O will be the limiting reagent, 0.275 moles of H₂S can be produced if 0.99 mol of aluminum sulfide and 0.55 mol of water react and 0.898 moles of the excess reagent remains after the reaction is complete.

In first place, the balanced reaction is:

Al₂S₃ + 6 H₂O → 2 Al(OH)₃ + 3 H₂S

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The limiting reagent will be the one that is used up first in the reaction while the excess reagent will be the one that is not completely used up during the reaction.

The amount of product obtained from the reaction will always depend on the amount of limiting reagent in the reaction.

To determine the limiting reagent, it is possible to use a simple rule of three as follows: if by stoichiometry 1 mole of Al₂S₃ reacts with 6 moles of H₂O, 0.99 mole of Al₂S₃ reacts with how many moles of H₂O?

moles of H₂O= (0.99 mole of Al₂S₃× 6 moles of H₂O)÷ 1 mole of Al₂S₃

moles of H₂O= 5.94 moles

But 5.94 moles of H₂O are not available, 0.55 moles are available. Since you have less moles than you need to react with 0.99 mole of Al₂S₃, H₂O will be the limiting reagent.

To calculate the amount of excess reagent that remains after the reaction is complete, you can use a simple rule of three as follows: if by stoichiometry 6 moles of H₂O reacts with 1 mole of Al₂S₃, 0.55 moles of H₂O reacts with how many moles of Al₂S₃?

moles of Al₂S₃= (1 mole of Al₂S₃× 0.55 moles of H₂O)÷ 6 moles of H₂O

moles of Al₂S₃= 0.092 moles

If 0.99 moles of Al₂S₃ are avilable, the excess moles can be calculated as:

excess moles of Al₂S₃= 0.99 moles - 0.092 moles

excess moles of Al₂S₃= 0.898 moles

0.898 moles of the excess reagent remains after the reaction is complete.

Considering the limiting reagent, the following rule of three can be applied: if by reaction stoichiometry 6 moles of H₂O form 3 moles of H₂S, 0.55 moles of H₂O form how many moles of H₂S?

moles of H₂S= (0.55 moles of H₂O×3 moles of H₂S)÷6 moles of H₂O

moles of H₂S= 0.275 moles

Finally, 0.275 moles of H₂S can be produced.

Learn more about limiting reagent:

brainly.com/question/24945784

#SPJ1

False. As you go from left to right across the periodic table, the number of protons and electrons in the atoms increases, but the atomic radius decreases.

This is due to the increasing nuclear charge (number of protons in the nucleus) that attracts the electrons more strongly, pulling them closer to the nucleus and reducing the size of the atom. This effect is only partially offset by the addition of more electrons in higher energy levels, as these are further away from the nucleus and have less influence on the overall size of the atom. Protons and electrons are subatomic particles that make up atoms. Protons are positively charged particles found in the nucleus of an atom, while electrons are negatively charged particles that orbit the nucleus in shells or energy levels.

Learn more about atomic radius here:

https://brainly.com/question/14544878

#SPJ4

Answer:

1 Al + 2 ZnCl2 -> 2 AlCl3 + 1 Zn

Explanation:

The equation needs to be balanced so that there is an equal number of atoms of each element on both sides of the equation. To balance this equation, the coefficients 1, 2, 2, and 1 need to be placed in front of Al, ZnCl2, AlCl3, and Zn, respectively:

1 Al + 2 ZnCl2 -> 2 AlCl3 + 1 Zn

This means that for every 1 atom of aluminum, there are 2 atoms of zinc chloride, which react to form 2 atoms of aluminum chloride and 1 atom of zinc.

ALLEN

Answer:

The formula for nitrogen fluoride is NF3.

Explanation:

Answer:

Explanation:

One nitrogen atom and three fluorine atoms make up this poisonous and extremely reactive chemical. It is used to make fertilisers, refrigerants, and semiconductors.

The mass of the fourth isotope is approximately 100.9866 amu.

Let x be the mass of the fourth isotope.

Since the average atomic mass is determined to be 69.3680

amu, we can set up an equation using the given information to solve for x, the mass of the fourth isotope:

(0.2436)(69.321 amu) + (0.3356)(69.3863 amu) + (0.1022)(69.8741 amu) + (x)(0.2186) = 69.3680 amu

Simplifying and solving for x, we get:

16.8670336 amu + 23.27195028 amu + 7.13326402 amu + 0.2186x = 69.3680 amu

47.2722479 amu + 0.2186x = 69.3680 amu

0.2186x = 22.0957521 amu

x = 100.9866 amu

Learn more about average atomic mass and isotopes at: https://brainly.com/question/28308742

#SPJ1

If it is in group 1 or group 7 (or any group higher than 7), the element is a metal or is a non-metal, then the compound is ionic.

Ionic chemistry is the study of how atoms and molecules interact with each other through the transfer of electrons. It involves the transfer of ions, which are atoms or molecules that have gained or lost an electron. These ions interact with each other to form ionic compounds, which are composed of ionic bonds. These bonds are formed by the attraction between the positive and negative charges of the ions.

This is because ions form when atoms of a metal lose electrons to a non-metal in order to achieve a full outer shell of electrons. Group 1 elements tend to lose one electron, while group 7 elements tend to gain seven electrons.

To learn more about ionic
https://brainly.com/question/30373783
#SPJ1

Answer:

C. Burning a log in a fireplace

Explanation:

Chemical energy is stored in the bonds between atoms and molecules and can be converted into another form of energy. This can occur through chemical reactions, such as combustion or decay.

An example of chemical energy being converted into another form is option C: Burning a log in a fireplace. In this example, the chemical energy stored in the wood is released through combustion, producing heat and light. The heat energy is then transferred to the surrounding air and environment, warming it up.

This is different from options A and B, which involve physical changes but not the conversion of chemical energy. Option D, a roller coaster going downhill, is an example of potential energy being converted into kinetic energy, but not of chemical energy being converted.


ALLEN

the answer for the scientific notation is[tex]D. 2.4 x 10¹².[/tex]

Scientific notation is a way of writing numbers that is commonly used in science and mathematics to represent very large or very small numbers in a compact and convenient format. The notation expresses a number as a coefficient multiplied by a power of 10. The coefficient is a number between 1 and 10, and the power of 10 represents the number of zeros to the right (for positive powers) or left (for negative powers) of the decimal point.

To perform the multiplication [tex](6.0 × 10^5) × (4.0 × 10^6)[/tex], we can simply multiply the coefficients and add the exponents of 10:

[tex](6.0 × 10^5) × (4.0 × 10^6) = 24.0 × 10^(5+6) = 24.0 × 10^11[/tex]

To express the answer in correct scientific notation, we need to make sure the coefficient is a number between 1 and 10. We can do this by dividing the coefficient by 10 and adding 1 to the exponent of 10:

[tex]24.0 × 10^11 = 2.4 × 10^(11+1) = 2.4 × 10^12[/tex]

Therefore, the answer is[tex]D. 2.4 x 10¹²[/tex]

To learn more about scientific notation follow the given link: brainly.com/question/28709269

#SPJ1

Asparagine is an amino acid that is most likely to participate in hydrogen bonding with water due to the presence of a polar, hydrophilic side chain  ( -CONH2). The other amino acids listed are nonpolar and hydrophobic.

Asparagine is an amino acid that contains a polar, hydrophilic amide side chain (-CONH2), making it the most likely amino acid to participate in hydrogen bonding with water. Hydrogen bonding occurs between the partially positive hydrogen atoms of water and the partially negative oxygen or nitrogen atoms of asparagine. The polar nature of the asparagine side chain allows it to interact with the polar water molecules, forming hydrogen bonds that help to stabilize the protein structure. This is particularly important in proteins that are located on the surface of cells or in extracellular spaces, as these regions are often exposed to water and require stable structures to maintain their function. In contrast, amino acids such as leucine, valine, alanine, and phenylalanine have nonpolar, hydrophobic side chains that do not participate in hydrogen bonding with water. These hydrophobic amino acids are more likely to be found in the interior of proteins, where they can interact with other nonpolar amino acids and help to stabilize the protein structure through hydrophobic interactions.

To know more about amino acids, visit:https://brainly.com/question/15687833

#SPJ4

Yes, a polymer is created when two or more monomers come together through the chemical process known as polymerization.

Polymers, which are big molecules made up of repeated subunits, are constructed from monomers. These smaller molecules, known as monomers, can join together to produce larger molecules by covalent bonding. Polymerization is the process of joining monomers to create polymers, and it can be triggered by a number of different chemical processes. Numerous natural and manufactured compounds, such as plastics, proteins, DNA, and carbohydrates, depend on monomers for their synthesis. Monomer selection is crucial in the design and synthesis of materials because the characteristics of the monomers that go into a polymer can have a significant impact on the qualities of the finished product.

Learn more about monomers here:

https://brainly.com/question/30407615

#SPJ4

What is the process by which a polymer is formed, and what are the starting materials for this process?

The minimum personal protective equipment (ppe) are glasses, gloves and protective coat

Personal Protective Equipment that is appropriate when working with laboratory. Gloves and lab coats are the simplest and most reliable types of safety equipment when there is a good chance that a splash will occur.

Labs do not allow open-toe footwear or sandals. Lab coats, aprons, or protective suits should be worn even if there is just a slight possibility of coming into contact with a very dangerous substance.

Use of specialist protective clothing is necessary to avoid skin contamination during exposures to strong acids.

To know more about personal protective equipment in laboratory

https://brainly.com/question/30262927

The minimum personal protective equipment (PPE) needed in a chemistry laboratory includes safety goggles, lab coat, gloves, and closed-toed shoes.

PPE refers to all the equipment that someone can use to reduce workplace hazards to worker health and safety. In the chemistry laboratory it is very important to use personal protective equipment because people will be handling different substances and implements that may represent a danger to the safety of the people on site.

Learn more about chemistry laboratory here https://brainly.com/question/14514242

#SPJ11

In contrast, metals, nonmetals, and metalloids are the three primary categories of elements. Metalloids often lie between metals and nonmetals in the periodic table, hence the phrase "semi-conductors."

Elements are the fundamental constituents of matter. They are pure chemicals that cannot be chemically divided into more basic substances. The periodic table contains 118 known elements, each of which has a distinct atomic number, chemical symbol, and set of physical and chemical properties. The periodic table arranges the elements according to their atomic makeup and electron configurations. Metals, nonmetals, and metalloids are the three primary categories of elements. Metals are typically ductile and malleable materials that transfer heat and electricity well. Nonmetals are not malleable or ductile and often perform poorly as heat and electrical conductors. The characteristics of metalloids fall in between those of metals and nonmetals.

Learn more about elements here:

https://brainly.com/question/11980760

#SPJ4

What are metalloids, and why are they sometimes referred to as semiconductors?

NOx is the chemical compound that leads to the formation of photochemical smog in the troposphere when it reacts with other compounds in the presence of sunlight.

As nitrogen oxides and volatile organic compounds (VOCs) combine with sunlight, a mixture of pollutants called photochemical smog is produced, which explains why there is a brown cloud above cities. Due to the fact that we receive the most sunshine in the summer, it tends to happen more frequently. The three main components of photochemical smog are sunlight, hydrocarbons, and nitrogen oxides. While nitrogen oxides and hydrocarbons can also arise from natural processes and fossil fuel-burning generating plants, gasoline-powered automobiles are the primary source of these pollutants.

Here is more information about photochemical smog: brainly.com/question/27960448

#SPJ4

Water is absorbed in the intestine through the process of osmosis. Osmosis is the movement of water molecules from an area of high concentration to an area of low concentration through a semi-permeable membrane.

In the intestine, the semi-permeable membrane is the cell wall of the intestinal epithelium.

As water moves into the intestine, it dilutes the concentration of solutes such as glucose and electrolytes, creating an osmotic gradient. This gradient drives the movement of water into the bloodstream, where it is distributed throughout the body and helps to maintain fluid balance.

In addition to osmosis, active transport mechanisms, such as sodium-glucose cotransporters, also play a role in absorbing water and electrolytes from the intestine. These transporters actively transport solutes and water across the cell membrane and into the bloodstream, further contributing to the regulation of fluid balance in the body.

Learn more about osmosis here:

https://brainly.com/question/14925714

#SPJ4

The pH values after the given volumes of acid have been added are: a) 12.18, b) 12.39, c) 11.78, d) 11.25, and e) 10.79.

To solve the problem, we need to use the balanced chemical equation for the reaction between KOH and HClO4:

KOH + HClO4 -> KClO4 + H2O

At the start of the titration, before any HClO4 has been added, we have a solution of KOH with a concentration of 0.150 M. We can use this concentration to calculate the initial concentration of hydroxide ions in the solution:

[OH-] = 0.150 M

a) Before any HClO4 has been added, the volume of the solution is 20.0 mL. At this point, no HClO4 has reacted with the KOH, so the concentration of OH- ions is still 0.150 M. To calculate the pH, we can use the formula for the dissociation constant of water:

Kw = [H+][OH-] = 1.0 x 10^-14

pH = -log[H+]

[H+] = Kw/[OH-] = 6.67 x 10^-13 M

pH = -log(6.67 x 10^-13) = 12.18

b) After 1.5 mL of HClO4 has been added, the volume of the solution is 21.5 mL. The moles of HClO4 added is:

0.125 mol/L x 0.0015 L = 1.875 x 10^-5 mol

The moles of KOH initially in the solution is:

0.150 mol/L x 0.020 L = 0.003 mol

Thus, the moles of KOH remaining after reaction with HClO4 is:

0.003 mol - 1.875 x 10^-5 mol = 0.00298125 mol

The total volume of the solution is 21.5 mL, so the new concentration of KOH is:

0.00298125 mol / 0.0215 L = 0.1387 M

Using this concentration, we can calculate the concentration of OH- ions:[OH-] = 0.1387 M

Using the same formula for Kw and pH as before, we find that:

[H+] = 4.06 x 10^-13 M

pH = -log(4.06 x 10^-13) = 12.39

c) Repeating the above process for a volume of 24.0 mL gives:

[H+] = 1.64 x 10^-12 M

pH = -log(1.64 x 10^-12) = 11.78

d) For a volume of 26.5 mL:

[H+] = 5.67 x 10^-12 M

pH = -log(5.67 x 10^-12) = 11.25

e) For a volume of 29.0 mL:

[H+] = 1.63 x 10^-11 M

pH = -log(1.63 x 10^-11) = 10.79

Therefore, the pH values after the given volumes of acid have been added are: a) 12.18, b) 12.39, c) 11.78, d) 11.25, and e) 10.79.

To learn more about dissociation constant Click here:

brainly.com/question/28197409

#SPJ4

The value of the expression 29.615 / 6.09 using the division property will be 4.863.

Algebra is the study of algebraic expressions, while logic is the manipulation of those concepts.

The acronym PEMDAS stands for Parenthesis, Exponent, Multiplication, Division, Addition, and Subtraction. This rule is used to answer the problem correctly and precisely.

The numbers are given below.

29.615 and 6.09

Then the division between the numbers 29.615 and 6.09 will be given by putting a division sign between them. Then we have

⇒ 29.615 / 6.09

⇒ 4.863

The value of the expression 29.615 / 6.09 using the division property will be 4.863.

More about the Algebra link is given below.

https://brainly.com/question/953809

#SPJ1

The law that states that the volume of a gas is directly proportional to the number of moles of gas at constant temperature and pressure is known as Avogadro's Law.

Avogadro's Law states that the volume of a gas is directly proportional to the number of moles of gas at constant temperature and pressure. This law was first proposed by Amedeo Avogadro, an Italian scientist, in 1811. According to this law, if the amount of gas in a container is increased while the temperature and pressure remain constant, the volume of the gas will also increase in proportion to the number of moles of gas present. Conversely, if the amount of gas is decreased, the volume will also decrease proportionally. Avogadro's Law is based on the fact that the number of gas molecules in a given volume of gas is directly proportional to the number of moles of gas present. This law is an important concept in the study of gases and is used in many areas of science, including chemistry, physics, and engineering. It is also essential in the development of the ideal gas law, which describes the behavior of gases under various conditions.

To know more about gas law,

visit:https://brainly.com/question/1190311

#SPJ4

The value of x  = 15°

What is triangle?

A triangle is a geometric shape that consists of three sides and three angles. It is a polygon with three sides. The sum of the three angles in a triangle always adds up to 180 degrees.

The sum of angles in a triangle is 180°.

Since we are given two angles, we can find the measure of the third angle by subtracting the sum of the two given angles from 180°.

The measure of the third angle is:

180° - 30° - 135° = 15°

Therefore, x = 15°.

Learn more about  triangle here : brainly.com/question/1058720

#SPJ1