The following is the formula for computing the customer lifetime value:CLV = Σ [(Mt – Ct) * (Retention rate) – 1] / (1 + i)t(Initial acquisition cost)Where,Mt – margin from the customer for the year t.CT – costs incurred to retain the customer in year t.Retention rate – rate of customer retention.
Margin from the customer is equal to revenue minus the cost of goods sold. In the given table, the margin from the customer can be calculated by subtracting COGS (Cost of Goods Sold) from the revenue. Thus, the following table is drawn as per the data given:Year Margin from customer (Mt) 1 $800 2 $520 3 $345 4 $270 5 $430 6 $470In the given table, the costs incurred to promote customer retention to a rate of 0.9 in years 1 through 6 are already given. Therefore, the given data can be used to calculate the customer lifetime value for the customer 421 based on the data above for the first six years of the customer relationship.CLV = [(800 - 800 * 0.1) / (1 + 0.1)] + [(520 - 80) / (1 + 0.1)²] + [(345 - 80) / (1 + 0.1)³] + [(270 - 80) / (1 + 0.1)⁴] + [(430 - 70) / (1 + 0.1)⁵] + [(470 - 70) / (1 + 0.1)⁶] – 800CLV = $2,504.44 (rounded to two decimal places)
Now, the discounted net cash flows for each year and in total are calculated:Year Discounted Net Cash Flow 1 $727.27 2 $427.61 3 $248.59 4 $142.32 5 $251.39 6 $246.26 Total $2,043.44Therefore, the discounted net cash flows for each year and in total are calculated to be $727.27, $427.61, $248.59, $142.32, $251.39, $246.26, and $2,043.44 respectively (rounded to four decimal places).
To know more about Lifetime value visit-
https://brainly.com/question/28539902
#SPJ11
Starting with $17,000, how much will you have in 18 years if
you can earn 15 percent on your money? Round the answer to the
nearest cent. Round FV-factor to three decimal places.
Calculate your answer
To calculate the future value (FV) of an investment, we can use the formula:
FV = PV * (1 + r)^n
Where:
FV is the future value
PV is the present value (starting amount)
r is the interest rate
n is the number of periods
Given:
PV (Present Value) = $17,000
Interest rate (r) = 15% or 0.15 (as a decimal)
Number of periods (n) = 18 years
Let's calculate the future value (FV):
FV = $17,000 * (1 + 0.15)^18
Using a calculator or spreadsheet, we can compute the value inside the parentheses first:
(1 + 0.15)^18 ≈ 8.864
Now, let's calculate the future value:
FV ≈ $17,000 * 8.864 ≈ $150,608.39
Therefore, after 18 years of earning a 15% annual interest rate, you would have approximately $150,608.39 (rounded to the nearest cent).
Learn more about investment, from
https://brainly.com/question/29547577
#SPJ11
the federal reserve sets the reserve requirement, which banks must meet through deposits at the fed and cash held at the bank. what do these requirements achieve? check all that apply.
The Federal Reserve sets the reserve requirement, which banks must meet through deposits at the Fed and cash held at the bank.
The reserves requirements aim to control the money supply and ensure the stability of the banking system. Thus, the following are the things that these requirements achieve:It helps to maintain the stability of the banking system.It helps to control the money supply.It helps to influence interest rates.The reserve requirement is a monetary policy tool that is used by the Federal Reserve to achieve its goals. Through the reserve requirement, the Federal Reserve influences the supply of money by controlling the amount of funds that banks can lend. This is because banks are required to hold a portion of their deposits in reserve at the Fed. By changing the reserve requirement, the Federal Reserve can control the amount of money that banks can lend, thereby influencing the money supply and the interest rates.In summary, the Federal Reserve sets the reserve requirement to control the money supply, influence interest rates, and maintain the stability of the banking system.
To know more about Federal Reserve visit:
https://brainly.com/question/14700070
#SPJ11
Shimmer Corporation manufactures and sells two types of decorative lamps, Knox and Ayer It expects to manufacture 16,000 Knox lamps and 7,000 Ayer lamps in 2017. The following data are available for the year 2017 Click the icon to view the information) Click the icon to view the December 31, 2017 production budo in units) Calculate (a) the direct materials usage budget in quantity and dollars (label it Schedule 3A (b) the direct materiais purchase budget in quantity and dollars (label Schedule 38) and (c) the direct manufacturing lab costs budget label it Schedule 4) for the year ending December 31, 2017 (a). Begin by calculating the direct materials usage budget in quantity and then in dollars (label it Sched 3A) for the year ending December 31, 2017 Schedule 3A: Direct Material Usage Budget in Quantity and Dollars for the Year Ending December 31, 2017 Material Metal Fabric Total Physical Units Budget Direct materials required for Knox lamps yards Direct materials required for Ayer lamps lbs Ayer Schedule 2: Production Budget (in Units) for the Year Ending December 31, 2017 Knox Budgeted units sales 16,100 Add target ending finished goods inventory 2,400 Total required units 18,500 2,500 Deduct beginning finished goods inventory 16,000 Units of finished goods to be produced 7,000 1,400 8,400 1,400 7,000 Print Done Direct materials Metal Fabric $ 3 per pound (same as in 2016) $ 4 per yard (same as in 2016) $ 23 per hour Direct manufacturing labor Content of Each Product Unit Product Knox Metal Ayer 2 pounds 2 yards Fabric 1 pounds 1 yard 0.05 hours 0.1 hours Direct manufacturing labor Direct Materials Direct manufacturing labor $ 23 per hour Content of Each Product Unit Product Knox Ayer Metal 1 pounds 2 pounds 2 yards Fabric 1 yard Direct manufacturing labor 0.05 hours 0.1 hours Direct Materials Metal Fabric Beginning inventory Target ending inventory 18,000 pounds 16,000 pounds 5,000 yards 3,000 yards
To calculate the direct materials usage budget in quantity and dollars (Schedule 3A) for the year ending December 31, 2017, we will use the provided information.
Here's the breakdown:
Schedule 3A: Direct Material Usage Budget in Quantity and Dollars for the Year Ending December 31, 2017
Material | Metal | Fabric
Physical Units Budget:
Knox lamps | 16,000 | 16,000 yards
Ayer lamps | 7,000 | 7,000 yards
Direct materials required for Knox lamps:
Metal: 16,000 units x 2 pounds/unit = 32,000 pounds
Fabric: 16,000 units x 2 yards/unit = 32,000 yards
Direct materials required for Ayer lamps:
Metal: 7,000 units x 1 pound/unit = 7,000 pounds
Fabric: 7,000 units x 1 yard/unit = 7,000 yards
To calculate the direct materials usage budget in dollars, we need to multiply the quantity by the respective cost per unit:
Direct materials cost per unit:
Metal: $3 per pound
Fabric: $4 per yard
Direct materials cost budget:
Knox lamps:
Metal: 32,000 pounds x $3/pound = $96,000
Fabric: 32,000 yards x $4/yard = $128,000
Ayer lamps:
Metal: 7,000 pounds x $3/pound = $21,000
Fabric: 7,000 yards x $4/yard = $28,000
Therefore, the direct materials usage budget in dollars (Schedule 3A) for the year ending December 31, 2017, is as follows:
Material | Metal | Fabric
Budgeted Cost:
Knox lamps | $96,000 | $128,000
Ayer lamps | $21,000 | $28,000
To know more about budgeted cost
https://brainly.com/question/31417552
#SPJ11
Multiple Choice The majority of firms in the U.S. are structured as corporations, O Undistributed corporate profits are taxable income to the shareholders. O Corporations can have an unlimited life. Shareholders are protected from all potential losses. О O Shareholders directly elect the chief financial officer.
Option (c), Corporations can have an unlimited life. Shareholders are protected from all potential losses.
The majority of firms in the U.S. are structured as corporations. Corporations can have an unlimited life and shareholders are protected from all potential losses. A corporation is an organization that is authorized to act as a legal entity, separate from its owners, and is owned by its shareholders. It is a legal structure used to organize a business. The structure of a corporation protects its shareholders from potential losses. This means that shareholders are not personally responsible for the debts or legal obligations of the corporation.
Corporations can exist in perpetuity or an unlimited life span. This means that a corporation can continue to exist, even if its owners or shareholders die or sell their shares. As long as the corporation is run properly and meets its legal requirements, it can exist indefinitely.
Shareholders do not directly elect the chief financial officer. The chief financial officer (CFO) is typically appointed by the board of directors, who are elected by the shareholders. The CFO is responsible for managing the financial operations of the corporation, including financial planning, budgeting, and reporting.
Undistributed corporate profits are taxable income to the shareholders. This means that if a corporation makes a profit and does not distribute it to its shareholders, the shareholders will still be taxed on that income.
Learn more about chief financial officer (CFO): https://brainly.com/question/1396068
#SPJ11
what other two functions besides operations must an operations strategy include?
Besides operations, an operations strategy may include the following two functions: Marketing and Sales Function and Supply Chain Management Function.
Marketing and Sales Function: The operations strategy should align with the marketing and sales function to ensure that the operations can effectively support the marketing and sales efforts. This involves understanding customer needs, market demands, and competitive factors to develop operational capabilities that meet customer requirements and support the overall marketing and sales strategy. It includes aspects such as product design, pricing, promotion, distribution, and customer service.
Supply Chain Management Function: The operations strategy should also integrate with the supply chain management function to optimize the flow of materials, information, and services across the supply chain. This involves managing the sourcing, procurement, production, and distribution processes to ensure efficient and effective coordination with suppliers, manufacturers, distributors, and customers. It includes activities such as supplier selection, inventory management, logistics planning, and demand forecasting.
By including the marketing and sales function and the supply chain management function in the operations strategy, organizations can ensure a holistic approach that aligns the operational capabilities with market demands and supply chain dynamics, ultimately leading to competitive advantage and customer satisfaction.
To know more about Operations strategy visit-
brainly.com/question/29602613
#SPJ11
Which of the following metrics is most useful when optimizing landing pages?
a. Pageviews Per Visit
b. Bounce Rate
c. Traffic Sources
d. Total Number of Visitors
B). When it comes to optimizing landing pages, the most useful metric to focus on is the bounce rate. Bounce rate represents the percentage of visitors who leave your site after viewing only one page.
By tracking your bounce rate, you can determine which landing pages are not performing well and identify areas for improvement. For example, if you have a high bounce rate on a landing page, you may need to adjust the messaging or design to better match visitor expectations. Additionally, by conducting A/B testing on landing pages with high bounce rates, you can experiment with different elements to see what resonates with your audience and ultimately improve your conversion rates.
While other metrics such as pageviews per visit, traffic sources, and total number of visitors are important, they do not provide as much insight into the effectiveness of your landing pages as the bounce rate.
To know more about optimizing visit:-
https://brainly.com/question/28587689
#SPJ11
The Luna Company made the following two errors in counting ending inventory: 1. Understated 12/31/22 inventory by $150 Overstated 12/31/23 inventory by $450 2. Indicate the error in the following items. Show supporting computations. 12/31/23 Retained Earnings $ over/under 2024 Net Income $ over/under 2022 2023 2024 U/S 150 O/S 450 a. b. Beg. Inv. Purchases End. Inv CGS Gross Profit Net Income Ret. Earnings
There is no change in Retained Earnings in 2022 and 2024 due to the errors in counting ending inventory. Retained Earnings in 2023 is overstated by $450.
The Luna Company committed two errors in counting the ending inventory. The first mistake was that the inventory was understated by $150 as of 12/31/22. The second error was that the inventory was overstated by $450 as of 12/31/23.Here are the answers to the following questions:1. The error in the following items as of 12/31/23Retained earnings $450 overNet income $450 over2. Beg. Inv. $0 (since the question only deals with ending inventory) Purchases $0 (since we're not given any details about purchases)Ending inventory = Beg. Inv. + Purchases - Cost of Goods Sold (CGS)CGS = Sales - Gross ProfitGross Profit = Net Sales - CGSNet Income = Gross Profit - ExpensesRetained Earnings = Beginning RE + Net Income - Dividends(a) End. Inv. = Beg. Inv. + Purchases - CGS$150 Understated = Beg. Inv. + $0 - ($0 + CGS)CGS = $150Ending inventory = Beg. Inv. + Purchases - $150$450 Overstated = Beg. Inv. + Purchases - Ending Inv.$450 = $0 + $0 - Ending Inv.Ending Inv. = $-450 (Negative value, which indicates an overstatement of inventory)(b) CGS = Sales - Gross Profit$0 = Sales - Gross ProfitGross Profit = $0Net Income = Gross Profit - ExpensesNet Income = $0 - $0Net Income = $0Since there is no net income, there will be no effect on Retained Earnings in any of the years. Retained Earnings would be the same in 2022, 2023, and 2024. Thus, there is no change in Retained Earnings in 2022 and 2024 due to the errors in counting ending inventory. But, there is an overstatement of $450 in 2023. As a result, Retained Earnings in 2023 is overstated by $450.
To know more about Inventory visit :
https://brainly.com/question/30138556
#SPJ11
n February 22, Triangle Corporation acquired 9,100 shares of the 200,000 outstanding common stock of Jupiter Co. at $38 plus commission charges of $165. On June 1, a cash dividend of $2.15 per share was received. On November 12, 2,900 shares were sold at $48 less commission charges of $200. At the end of the accounting period on December 31, the fair value of the remaining 6,200 shares of Jupiter Company’s stock was $38.52 per share. Required: Using the cost method, journalize the entries for (a) the purchase of stock, (b) the receipt of dividends, (c) the sale of 2,900 shares, and (d) the change in fair value. Refer to the chart of accounts for the exact wording of the account titles. CNOW journals do not use lines for journal explanations. Every line on a journal page is used for debit or credit entries. CNOW journals will automatically indent a credit entry when a credit amount is entered. In your computations, round per share amounts to two decimal places. When required, round final answers to the nearest dollar.
CHART OF ACCOUNTS
Triangle Corporation
General Ledger
ASSETS
110 Cash
111 Petty Cash
120 Accounts Receivable
121 Allowance for Doubtful Accounts
131 Notes Receivable
132 Interest Receivable
141 Merchandise Inventory
145 Office Supplies
146 Store Supplies
151 Prepaid Insurance
161 Investments-Jupiter Co. Stock
165 Valuation Allowance for Equity Investments
166 Valuation Allowance for Available-for-Sale Investments
181 Land
191 Store Equipment
192 Accumulated Depreciation-Store Equipment
193 Office Equipment
194 Accumulated Depreciation-Office Equipment
LIABILITIES
210 Accounts Payable
221 Notes Payable
231 Interest Payable
241 Salaries Payable
251 Sales Tax Payable
EQUITY
311 Common Stock
312 Paid-In Capital in Excess of Par-Common Stock
321 Preferred Stock
322 Paid-In Capital in Excess of Par-Preferred Stock
331 Treasury Stock
332 Paid-In Capital from Sale of Treasury Stock
340 Retained Earnings
350 Unrealized Gain on Equity Investments
351 Cash Dividends
352 Stock Dividends REVENUE
410 Sales
611 Interest Revenue
612 Dividend Revenue
621 Income of Jupiter Co.
631 Gain on Sale of Investments
641 Unrealized Gain on Trading Investments
EXPENSES
511 Cost of Merchandise Sold
512 Bad Debt Expense
515 Credit Card Expense
516 Cash Short and Over
520 Salaries Expense
531 Advertising Expense
532 Delivery Expense
533 Repairs Expense
534 Selling Expenses
535 Rent Expense
536 Insurance Expense
537 Office Supplies Expense
538 Store Supplies Expense
561 Depreciation Expense-Store Equipment
562 Depreciation Expense-Office Equipment
590 Miscellaneous Expense
710 Interest Expense
721 Loss of Jupiter Co.
731 Loss on Sale of Investments
741 Unrealized Loss on Trading Investments
This journal entry assumes that the investments in Jupiter Co. stock are accounted for using the cost method, which means the investments are initially recorded at cost and subsequent changes in fair value are not recognized.
The dividends received are recorded as dividend revenue. The sale of shares results in a loss on sale, and the change in fair value is recorded through adjusting entries for the valuation allowance and unrealized gain on equity investments. Purchase of Stock: Date: February 22 Debit: Cash: 138,800.00 Commission Expense: 200.00 Loss on Sale of Investments: 11,300.00 Investments - Jupiter Co. Stock: 159,500.00.
learn more about:- Triangle Corporation here
https://brainly.com/question/4427163
#SPJ11
You have just been tasked to put together a team to develop a new class registration process at school. You are the leader of the team and can build the team however you want. Keeping in mind the characteristics of an effective team, explain the size of the team you would build, the diversity of the team members, and the specific member roles. In addition, identify how your talents will make you a better team leader.
Diversity of team members For a team to be effective, it is essential to have team members with diverse backgrounds, experiences, skills, and perspectives.
This will lead to increased creativity, innovation, and problem-solving. It is crucial to note that diversity is not just about ethnicity and gender, but also includes differences in work styles, communication, and personality.2. Size of the team The ideal size of the team will depend on the nature and complexity of the project. However, research has shown that the optimal team size is between five to seven members.
This size allows for effective communication, collaboration, and decision-making. It also enables all team members to feel like they are valued and can contribute to the project.3. Specific member roles The roles and responsibilities of each team member should be clear and well-defined.
To know more about experiences visit:-
https://brainly.com/question/30461376
#SPJ11
The purpose of this assignment is to understand the various terminology when working on taxes. Think about how Jamie Lee Jackson’s scenario in the Continuing Case located Connect, and how it applies to your daily life. Write a 150-200-word summary discussing the following items. Note: You can go over the word count if so desired.
Explain the difference between tax deductions, tax credits, exemptions, and filing status.
What tax-efficient strategies could be used to lower your tax liability?
Jamie Lee Jackson’s scenario in the Continuing Case located in Connect and how it applies to your daily lifeThe Internal Revenue Service (IRS) offers tax incentives to motivate taxpayers to save for retirement, invest in education, and purchase energy-efficient products.
A tax credit, a tax deduction, a tax exemption, and a filing status are the four primary elements of the U.S. federal income tax system. These four elements aid taxpayers in lowering their tax liability and retaining more of their hard-earned cash. A tax credit is a dollar-for-dollar reduction in taxes. A $1,000 tax credit, for example, reduces your tax obligation by $1,000.
A tax deduction is an amount that reduces the overall amount of income on which taxes are calculated. A tax exemption is an amount of money that is exempt from federal taxes. A filing status determines how a taxpayer's income is taxed. Single, married filing jointly, married filing separately, and head of household are the four filing options. One may choose the filing status that allows them to take advantage of the most tax breaks.The following are some tax-efficient strategies that may help to reduce your tax liability:-
Investing in a tax-deferred account-Saving for retirement-Contributing to a Health Savings Account (HSA)-Making charitable donations-Claiming tax credits for education or energy-efficient home upgrades-Establishing a home-based company and deducting expenses.Taxes are an unavoidable part of life, and the IRS is always seeking for methods to make sure everyone pays their fair share. However, utilizing deductions, credits, and other tax-efficient strategies may help you save a significant amount of money on taxes and retain more of your hard-earned cash.
To know more about Tax exemption visit-
brainly.com/question/30046826
#SPJ11
Kessen Inc.'s bonds mature in 7 years, have a par value of $1,000, and make an annual coupon payment of $70. The market interest rate for the bonds is 8.5%. Should an investor decide to purchase this bond today, would the bond be priced at a premium or discount? Please explain.
The bond would be priced at a discount.
Kessen Inc.'s bonds have an annual coupon payment of $70, a par value of $1,000, and mature in 7 years. If the market interest rate for the bonds is 8.5 percent, an investor who wants to buy this bond today should ask how much it costs. Because the coupon rate is less than the market interest rate, this bond would be priced at a discount. When the market interest rate is greater than the bond's coupon rate, a bond is typically priced at a discount. At the time of purchase, the bond's current price should be lower than its par value.
The bond would be priced at a discount.
To know more about market interest rate visit:
https://brainly.com/question/28147772
#SPJ11
Problem 5 Midtown Bank always has two tellers on duty. Customers arrive to receive service from a teller at a mean rate of 40 per hour. A teller requires an average of 2 minutes to serve a customer. When both tellers are busy, an arriving customer joins a single line to wait for service. Assume that arrival rate and service times are Poisson and exponential, respectively. Determine the basic measures of performance W₂, W. L. and L-for this queueing system.
Queueing theory is a mathematical approach used to study systems or queues that form when demand outstrips capacity, resulting in customers waiting in line. Midtown Bank has two tellers on duty, and customers arrive at a rate of 40 per hour to receive service from a teller. The average time a teller requires to serve a customer is two minutes. We'll use the Poisson arrival rate and exponential service time assumptions in this queueing system.
Basic measures of performance for this queueing system are: the average waiting time for a customer in the queue (W), the average waiting time for a customer in the system (W₂), the average number of customers waiting in the queue (L), and the average number of customers in the system (L₀).
Now let's calculate each of these measures:
Average number of customers waiting in the queue (L)
L = λ²/(μ(μ - λ))
λ = 40 per hour = 40/60 per minute = 2/3 per second
μ = 1/2 minutes per customer
L = (2/3)² / (1/2 * (1/2 - 2/3))
L = (4/9) / (-1/6)
L = (4/9) * (-6/1)
L = -24/9
L = -8/3 or -2.67
The average number of customers waiting in the queue is negative, which means there are no customers waiting in the queue.
Average number of customers in the system (L₀)
L₀ = λ/(μ - λ)
L₀ = (2/3) / (1/2 - 2/3)
L₀ = (2/3) / (-1/6)
L₀ = (2/3) * (-6/1)
L₀ = -4 or 4 customers
The average number of customers in the system is 4.
Average waiting time for a customer in the queue (W)
W = λ/(μ(μ - λ))
W = (2/3) / (1/2 * (1/2 - 2/3))
W = (2/3) / (-1/6)
W = (2/3) * (-6/1)
W = -4 or 4 minutes
The average waiting time for a customer in the queue is 4 minutes.
Average waiting time for a customer in the system (W₂)
W₂ = 1/(μ - λ)
W₂ = 1/(1/2 - 2/3)
W₂ = 1/(-1/6)
W₂ = -6 or 6 minutes
The average waiting time for a customer in the system is 6 minutes.
Therefore, the basic measures of performance for this queueing system are:
The average waiting time for a customer in the queue (W) = 4 minutes The average waiting time for a customer in the system (W₂) = 6 minutes The average number of customers waiting in the queue (L) = 0The average number of customers in the system (L₀) = 4 customers.
To know more about Queueing theory visit:
https://brainly.com/question/30908030
#SPJ11
Explain the term logistics and supply chain. How do they
relate to each other? How do they add value for firms? (10
marks)
Logistics and supply chain management are closely related terms that refer to the process of planning, implementing, and controlling the flow of goods, services, and information from the point of origin to the point of consumption.
Logistics involves the management of activities such as transportation, warehousing, inventory management, and order fulfillment, while supply chain management encompasses the coordination and integration of these activities across multiple organizations involved in the production and distribution of goods or services.
The effective management of logistics and supply chain activities adds value for firms in several ways. Firstly, it helps in reducing costs by optimizing transportation routes, minimizing inventory levels, and improving overall operational efficiency. By streamlining processes and eliminating unnecessary steps, firms can achieve cost savings and enhance their profitability. Secondly, logistics and supply chain management contribute to improving customer satisfaction. Efficient order fulfillment and timely delivery of products or services enhance customer experience and build loyalty. Additionally, effective supply chain management enables firms to respond quickly to changing customer demands and market trends, improving their competitiveness in the marketplace.
Learn more about logistics here : brainly.com/question/30009541
#SPJ11
Question 1 Tally.ERP 9 as an accounting software package was exclusively devised to automate and integrate all the operations, such as sales, finance, purchasing, inventory, and manufacturing for many small and medium sized enterprises (SMEs). With Tally.ERP 9, accurate, up-to date business information is literally at your fingertips anywhere in the world. Required: With practical examples using Ayele restaurant company as a case study, explain the functionalities that has enabled Tally.ERP 9 to make inroads into the Ghanaian accounting software packages market. (20 marks) Question 2 You have been employed as a financial accountant after graduating from the University of Professional Studies, (UPSA) in CAIS Company Limited (A firm in the construction industry). The top management of the company is asking you to deploy a computerized accounting system in the Finance Department as the head of that department. The following questions were posed to you: (a) Discuss ten possible paybacks will a computerised accounting system bring CAIS Company Limited. (10 marks) (b) There are so many different accounting software packages on the Ghanaian market. Discuss five factors that CAIS Company Limited should be looking for when choosing a computerised accounting package. (10 marks) Question 3 The vision of Enterprise Insurance Limited is to gain a competitive superiority over its competitors in the same industry in Ghana. Required: a. Using practical examples, discuss how the emerging accountancy tool which focuses more on developing systems to perform intelligent things be adopted to assist Enterprise Insurance Limited to achieve this vision. (10 marks) b. Are there any obstructions to how this competitive superiority using this emerging accountancy tool could be harnessed by Enterprise Insurance Limited? (10 marks)
Functionalities that have enabled Tally.ERP 9 to make inroads into the Ghanaian accounting software packages market with practical examples using Ayele restaurant company as a case study: Tally
.ERP 9 as an accounting software package was exclusively devised to automate and integrate all the operations, such as sales, finance, purchasing, inventory, and manufacturing for many small and medium-sized enterprises (SMEs). The following are some of the functionalities that have enabled Tally.ERP 9 to make inroads into the Ghanaian accounting software packages market:
1. Accounting Management: This is one of the key features of Tally.ERP 9, as it aids in the management of all accounting procedures, including ledgers, balance sheets, and bank reconciliation statements, among others. Tally.ERP 9 can assist Ayele restaurant in managing its accounts by generating various kinds of accounts reports, ledger reports, trial balance, and balance sheets, among other things.2. Inventory Management:
Tally.ERP 9 can aid Ayele restaurant in managing its inventory by providing them with a clear view of inventory levels, recording purchases and sales transactions, tracking expiration dates, and automating purchase orders. It assists Ayele restaurant to keep track of all inventory items in real-time and to generate inventory reports.3. Statutory Compliance:Tally.ERP 9 assists Ayele restaurant in adhering to the regulations and legal requirements established by the Ghanaian government, including filing tax returns and submitting reports. This is accomplished by producing accurate tax calculation reports, filing GST returns, e-Way bills, and so on.
Learn more about cash receipts Here-
https://brainly.com/question/30237257
#SPJ4
Inspection, scrap, and repair are examples of:
Select one:
a. prevention costs
b. external costs
c. internal costs
d. costs of dissatisfaction
Inspection, scrap, and repair are examples of internal costs. Hence the correct option is c.
Quality costs are divided into four categories: internal failure, external failure, prevention, and appraisal. The internal costs are inspection, scrap, and repair. They are all part of the internal costs. These costs include the costs of lost time and materials, as well as the costs of repair and replacement of defective products or parts. They are associated with identifying and resolving defects before the product is shipped.
The dissatisfaction cost is the cost of a product or service that fails to meet customer expectations. This is the cost of the customer's dissatisfaction with a product or service that falls short of their expectations. The dissatisfaction cost includes the cost of customer complaints and returns, as well as the loss of future sales due to negative word of mouth. It is an external failure cost.
Prevention costs are costs associated with preventing defects and problems from occurring in the first place. These costs are often associated with process improvements, training, and education. Examples of prevention costs include research and development, quality planning, quality assurance, and process control.
Appraisal costs are the costs of verifying that the product or service meets customer requirements. These costs are associated with the measurement and testing of products or services to ensure they meet specifications. Examples of appraisal costs include inspection, testing, and calibration.
You can learn more about internal costs at: https://brainly.com/question/9525022
#SPJ11
According to Ricardo, a country will have a comparative advantage in the product in which its
According to Ricardo, a country will have a comparative advantage in the product in which its opportunity cost of producing is lower than that of other countries. David Ricardo was a 19th-century British economist who developed the theory of comparative advantage in international .
Is the theory of theory of comparative advantage proposes that a country should focus on producing the goods and services for which it has the lowest opportunity cost in order to achieve the highest efficiency and ultimately economic growth. Opportunity cost is the value of the next best option that must be given up in order to pursue a certain In other words.
should specialize in producing goods and services that it is most efficient at producing, even if it is not the absolute best at producing those goods and services. By doing so, it can trade with other countries and obtain the goods and services that it is not efficient at producing, leading to gains from trade.
To know more about producing Visit:
https://brainly.com/question/30141735
#SPJ11
which of the following statements is true? rate constants are temperature dependent.
Yes, the statement "Rate constants are temperature dependent" is true. The rate constant (k) of a reaction is directly proportional to temperature and increases with temperature.
A chemical reaction rate is directly proportional to the concentration of the reactants, which determines the rate of reaction. The rate constant is a proportionality constant in the rate equation of a chemical reaction. The Arrhenius equation is used to describe the relationship between temperature and rate constant in chemical kinetics. It is defined as: k = Ae^(-Ea/RT) where k is the rate constant, A is the pre-exponential factor, Ea is the activation energy of the reaction, R is the ideal gas constant, and T is the absolute temperature.The Arrhenius equation helps to explain why most chemical reactions occur faster at higher temperatures. As temperature increases, more particles acquire enough energy to overcome the activation energy barrier, which leads to more successful collisions and an increased rate of reaction. Thus, rate constants are temperature dependent.
To know more about Rate constants visit:
https://brainly.com/question/20305871
#SPJ11
. calculate the contribution to the test statistic for male in the leisure location. contribution = 5. calculate the test statistic for this procedure.
The contribution to the test statistic for males in the leisure location is 5.
In order to calculate the test statistic for this procedure, we need to follow these steps:
Step 1: Identify the observed frequency (O) and the expected frequency (E) for males in the leisure location.
Step 2: Calculate the difference between the observed frequency and the expected frequency (O - E).
Step 3: Square the difference calculated in step 2 ((O - E)^2).
Step 4: Divide the squared difference by the expected frequency ((O - E)^2 / E).
Step 5: The result obtained in step 4 is the contribution to the test statistic for males in the leisure location, which is given as 5 in this case.
The test statistic is typically used in chi-square tests, which are employed to compare observed frequencies with expected frequencies based on certain assumptions. In this particular case, the contribution to the test statistic for males in the leisure location is already provided as 5. To calculate the overall test statistic, we would need to follow the same steps mentioned above for all the other categories (e.g., females in leisure location, males in other locations, etc.) and sum up all their contributions. The resulting value would be the test statistic for this procedure.
To know more about test statistic visit :-
https://brainly.com/question/31746962
#SPJ11
Can you describe a time when your stress resulted in making errors at work
Answer:
ACTION: When I started work on the task, I soon realised it was going to take me much longer than I'd anticipated. I'd made a mistake in estimating how long the task would take to complete. Because of my mistake, I had to stay behind late after work each evening and commit the extra hours to get the job finished
QUESTION 3 Table 5.7 The Terminal Company is attempting to balance its assembly line of high-voltage electrical connectors. The desired output for the line is 50 connectors per hour, and the information on the work elements for this assembly line is as follows. Work Elements Immediate Time (sec) Predecessor(s) 40 36 20 25 30 34. 35 B, C 15 40 38 E, H G, I, J Use the information from Table 5.7 to balance this line. What is the most efficient solution? 70-79% more than 90% 80-90% O less than 70%
Table 5.7 gives the following data about the assembly line of high-voltage electrical connectors: Work Elements Immediate Time (sec) Predecessor(s) 40 36 20 25 30 34. 35 B, C 15 40 38 E, H G, I, J Desired output = 50 connectors per hour. The assembly line must be balanced using this data.
Let's first find the cycle time (CT): CT = (40 + 36 + 20 + 25 + 30 + 34 + 35 + 15 + 40 + 38) seconds / 50 connectors per hour CT = 303 seconds / 50 connectors per hour CT = 6.06 seconds per connector or 363.64 seconds per minute The bottleneck work element is B, C (immediate time = 35 seconds). It must be equal to or greater than the CT. Hence, it must be assigned to its own workstation (by itself). Also, E, H (immediate time = 38 seconds) cannot be assigned to the same workstation as G, I, J (immediate time = 40 seconds). Here is the allocation:Work Station 1: Work Element Immediate Time (sec) Predecessor(s) 35 B, CWork Station 2: Work Element Immediate Time (sec) Predecessor(s) 40 G, I, JWork Station 3: Work Element Immediate Time (sec) Predecessor(s) 38 E, HWork Station 4: Work Element Immediate Time (sec) Predecessor(s) 36 NoneWork Station 5: Work Element Immediate Time (sec) Predecessor(s) 30 NoneWork Station 6: Work Element Immediate Time (sec) Predecessor(s) 25 NoneWork Station 7: Work Element Immediate Time (sec) Predecessor(s) 20 NoneWork Station 8: Work Element Immediate Time (sec) Predecessor(s) 15 None Work Station 1 has the longest cycle time. The efficiency of this line can be calculated as follows: Efficiency = (Sum of the workstation times) / (Number of workstations * CT) Efficiency = (35 + 6.06 + 38 + 36 + 30 + 25 + 20 + 15) seconds / (8 workstations * 6.06 seconds per connector) Efficiency = 70.96%So, the most efficient solution is less than 70%. Answer: O less than 70%.
To know more about electrical connectors visit:
https://brainly.com/question/32418929
#SPJ11
This is a subjective question, hence you have to write your answer in the Text-Field given below. 7.6693 Construction rings are tested for their diameter desired to be within a certain range. Random samples of 5 rings are chosen from the despatch section and their diameter values measured. The sample mean X and standard deviations are found. After 20 samples. EX bar = 1850 and Es = 200. The specifications are 95 = 5 mm. [2x7=14] a. Find the control limits for the X bar and s-charts. b. Assuming that the process in control, estimate the process mean and process standard deviation c. Find the process capability indices Cp and Cpk and comment on their values. d. If the target value is 90 mm, find the capability indices Cpm and Cpmk. e. What proportion of the output is nonconforming, assuming a normal distribution of the quality characteristic? 1. If the process mean is moved to 92 mm, what proportion of the output is nonconforming? What are your proposals to improve process performance? g. Can we conclude that Cpk is less than 1? Use a = 0.05. 2This is a subjective question, hence you have to write your answer in the Text-Field given below. 7.6693 Construction rings are tested for their diameter desired to be within a certain range. Random samples of 5 rings are chosen from the despatch section and their diameter values measured. The sample mean X and standard deviations are found. After 20 samples, EX bar = 1850 and Es = 200. The specifications are 95 = 5 mm. [2x7=14] a. Find the control limits for the X bar and s-charts. b. Assuming that the process in control, estimate the process mean and process standard deviation. c. Find the process capability indices Cp and Cpk and comment on their values. d. If the target value is 90 mm, find the capability indices Cpm and Cpmk. e. What proportion of the output is nonconforming, assuming a normal distribution of the quality characteristic? 1. If the process mean is moved to 92 mm, what proportion of the output is nonconforming? What are your proposals to improve process performance? g. Can we conclude that Cpk is less than 1? Use a = 0.05.
a. Control limits for X bar chart:
Upper Control Limit (UCL) = 1850 + 1.494*200 = 2150.8
Lower Control Limit (LCL) = 1850 - 1.494*200 = 1549.2
Control limits for s chart:
Upper Control Limit (UCL) = 200 * 2.114 = 422.8
Lower Control Limit (LCL) = 200 * 0 = 0
b. Estimation of process mean: 1850 mm
Estimation of process standard deviation:
200 mm
c. Cp and Cpk = Lower specification limit = 95 mm
Upper specification limit = 105 mm.Cp = (USL-LSL)/(6σ) = (105 - 95)/(6 * 200) = 0.00083
Cpk = min{ (USL - µ)/3σ, (µ - LSL)/3σ} = min{ (105 - 1850)/3(200), (1850 - 95)/3(200)} = 0.5.
As Cpk is also less than 1, it indicates that process is not centered within the specification limits. Thus, this process needs to be improved. Reduce variability in the process. Improve monitoring and measurement of the process.
a. Control limits for X bar chart:
Upper Control Limit (UCL) = 1850 + 1.494*200 = 2150.8
Lower Control Limit (LCL) = 1850 - 1.494*200 = 1549.2
Control limits for s chart:
Upper Control Limit (UCL) = 200 * 2.114 = 422.8
Lower Control Limit (LCL) = 200 * 0 = 0
b. Estimation of process mean: 1850 mm
Estimation of process standard deviation:
200 mm
c. Cp and Cpk = Lower specification limit = 95 mm
Upper specification limit = 105 mm.Cp = (USL-LSL)/(6σ) = (105 - 95)/(6 * 200) = 0.00083
Cpk = min{ (USL - µ)/3σ, (µ - LSL)/3σ} = min{ (105 - 1850)/3(200), (1850 - 95)/3(200)} = 0.5.
Comment on their values: Since Cp is very less than 1, the process is not capable to meet the specification limits. As Cpk is also less than 1, it indicates that process is not centered within the specification limits. Thus, this process needs to be improved.
d. Cpkm = Min{Cpl, Cpu} = Min{3σ(μ - LSL), 3σ(USL - μ)} / (USL - LSL)
When target value is 90 mm,
LSL = 85 mm and USL = 95 mm. Cpm = |
Tolerance band width| / 6σ =(95-85) / (6*200) = 0.00083
Cpkm = Min{3σ(1850 - 85), 3σ(95 - 1850)} / (95 - 85)
Cpkm = Min{3*200*(1850-85), 3*200*(95-1850)}/(95-85) = 0.4067 (Minimum of Cpl and Cpu is Cpu)
d. Nonconforming proportion of output, assuming a
normal distribution = P(Z < (LSL - µ)/σ) + P(Z > (USL - µ)/σ)
where, µ = 1850 mm, σ = 200 mm, LSL = 95 mm and USL = 105 mm
P(Z < (95 - 1850)/200) + P(Z > (105 - 1850)/200)P(Z < -8.75) + P(Z > 8.75) is negligible. Therefore, the proportion of non-conforming output is negligible.
e. Nonconforming proportion of output, assuming normal distribution, if the process mean is moved to 92 mm,
P(Z < (95 - 92)/200) + P(Z > (105 - 92)/200)P(Z < 0.015) + P(Z > 0.065) = 0.0207 (approximately).
Therefore, the proportion of non-conforming output is 2.07%.
Proposal to improve process performance: Since both Cp and Cpk values are low, it indicates the process is not capable and is not centered within the specification limits. To improve process performance, following measures can be taken: Identify and remove the root cause of the problem. Adopt more capable machines. Implement process control techniques. Reduce variability in the process. Improve monitoring and measurement of the process.
g. As Cpk is 0.5 which is less than 1, we can conclude that the process is not capable of meeting the specification limits.
To know more about measurement visit:
https://brainly.com/question/2384956
#SPJ11
Which of the following is the most correct characterization of a "Bottleneck?" A bottleneck is the step that causes all other steps in the process not to live up to their full potential. The bottlenec
The most correct characterization of a bottleneck is that it is a point in a process where the flow of work is restricted or slowed down, leading to a delay in the completion of tasks.
It is often caused by a resource constraint or an inefficient process design that prevents the smooth flow of work from one step to another. The bottleneck can have a significant impact on the productivity and profitability of an organization, as it limits the throughput and efficiency of the system. Therefore, it is important to identify and eliminate bottlenecks in order to improve the overall performance of the process. This can be done through process analysis and optimization, resource allocation, and prioritization of tasks. Effective management of bottlenecks can lead to increased productivity, faster delivery times, and improved customer satisfaction.
To learn more about bottleneck click here https://brainly.com/question/32075545
#SPJ11
You are given an M/M/1 queueing system in which the expected waiting time and expected number in the system are 120 minutes and 8 customers, respectively. Using one hour as the unit of time determine the A. average expected customer's arrival rate, 1, B. average service rate C. the utilization factor p of the system.
The utilization factor (p) of the system is 0.264.
Given information: Expected waiting time (W) = 120 minutes
Expected number of customers (L) = 8 customers
λ (arrival rate) = ? μ (service rate) = ? Utilization factor (p) = ?
The formulae required to solve this problem are:
W = L/λ(μ - λ)p = λ/μ
where,
W: Expected waiting time L: Expected number of customers λ: Average arrival rate μ: Average service rate p: Utilization factor(A)
The average expected customer's arrival rate is
λ = L/Wλ = 8/120 = 1/15 customers per minute
λ = 1/15 × 60 = 4 customers per hour
Therefore, the average expected customer's arrival rate is 4 customers per hour.
(B) The average service rate is
μ = λ(W + 1)μ = λ(W + 1)/L
where W + 1 = expected time in the system= expected waiting time + expected service time= W + 1/μμ = λ(W + 1)/Lμ = λ(W + 1)/8μ = λ(120 + 1)/8μ = λ × 15.125
Therefore, the average service rate is 15.125 customers per hour.
(C) The utilization factor (p) of the system is p = λ/μp = 4/15.125
p = 0.264
Therefore, the utilization factor (p) of the system is 0.264.
To know more about utilization visit:
https://brainly.com/question/32065153
#SPJ11
Explain what can occur to cause an increase in the debt ratio. 5) First, explain what seignorage is. Second, write out and explain the expression that represents seignorage. And finally, what policies can a central bank implement to increase seignorage?
The debt ratio is determined by dividing a company's total liabilities by its total assets. The numerator represents the amount of debt, while the denominator represents the amount of assets the company has at its disposal.
What is seignorage?Seignorage refers to the profit made by the issuer of currency, which is the difference between the face value of the currency and the cost of producing it. It is a source of revenue for the central bank and the government. Seignorage is affected by the total amount of currency in circulation, which is influenced by the central bank's policies.
The seignorage expression is represented by the following equation: (Total currency value - Cost of producing currency) / Total currency valueIn this equation, the total value of the currency in circulation is multiplied by the difference between the face value and the cost of producing the currency. Then, the result is divided by the total value of the currency in circulation. It's also worth noting that the higher the cost of producing currency, the lower the seignorage amount will be.
Policies that a central bank can use to increase seignorage include:
Increasing the money supply - The central bank can increase the money supply by printing more currency, which increases seignorage by increasing the total currency value in circulation.
Reducing the cost of producing currency - The central bank can reduce the cost of producing currency by adopting cost-saving measures such as switching to lower-cost materials or outsourcing the production of currency to a third-party
.Printing new currency - When the central bank prints new currency to replace damaged or old currency, it can increase seignorage. The cost of producing new currency is generally lower than the face value of the currency, so the central bank can make a profit by producing and distributing new currency.
Learn more about the money supply: https://brainly.com/question/30218160
#SPJ11
To reinforce the core concepts related to the subject, the instructor will provide a topic related to change management in Week 1/ Week 2. The students will have to search for academic articles related to the topic and write a research paper. The aim of this assignment is to develop an in-depth understanding of a topic related to change management, by examining the latest academic articles, and other relevant content related to the course.
Objectives
The research paper will help students gain an in-depth understanding of one key change management concepts. This is an individual assignment, and the students will be assigned a topic for writing the research paper. The students must describe the concept in the research paper in detail and then critically evaluate, with evidence, the ideas presented in th
The instructor will provide a topic related to change management in Week 1/Week 2 to reinforce the core concepts related to the subject.
The students will have to search for academic articles related to the topic and write a research paper. The objective of this assignment is to develop an in-depth understanding of a topic related to change management, by examining the latest academic articles and other relevant content related to the course.
The research paper will help students gain an in-depth understanding of one key change management concept. It is an individual assignment, and the students will be assigned a topic for writing the research paper. The students must describe the concept in detail and then critically evaluate, with evidence, the ideas presented in the main answer. I
To know more about management visit:-
https://brainly.com/question/32653981
#SPJ11
our economists estimate that citizens in our country have an mpc of .80. we can fix the problem by increasing gdp by $400
the MPC of .80 tells us that if we increase GDP by $400, people will consume more and save less, leading to an increase in GDP.
The given problem states that the economists estimate that citizens in our country have an MPC of .80. We can fix the problem by increasing GDP by $400. So, what is the MPC, and MPC stands for Marginal Propensity to Consume. It is defined as the proportion of an additional increment of income that is spent on consumption, rather than on saving. It is a crucial concept in Keynesian economics and demand theory. MPC is used to fix the problem by increasing GDP by $400 as given. MPC tells us that if the income of individuals in the economy increases by $1, then they will spend 0.80 cents on consumption and save 0.20 cents. If GDP increases by $400, it means that the economy will have more money in circulation. Now, if people start to consume more and save less due to the increase in GDP, then it will further increase GDP by increasing the demand for goods and services. Hence, it will fix the problem. Therefore, the MPC of .80 tells us that if we increase GDP by $400, people will consume more and save less, leading to an increase in GDP.
To know more about economy visit:
https://brainly.com/question/30131108
#SPJ11
Hermione Ltd. produces magical wands. The budgeted production
equals 500 magical wands and the budgeted fixed production
overheads equals £282,000. The actual production level was 20%
lower than esti
The fixed production overheads represent an estimation based on the given information. Variations in actual costs and production levels may still occur, requiring further analysis and adjustments to accurately reflect the impact on the company's financials.
Hermione Ltd., a company that produces magical wands, had initially budgeted to produce 500 magical wands. The budgeted fixed production overheads for this production level were set at £282,000. However, the actual production level turned out to be 20% lower than the estimated quantity.
To determine the impact of the lower production level on the fixed production overheads, we need to calculate the revised overheads based on the actual production quantity.
Given that the actual production level is 20% lower than the budgeted quantity of 500 magical wands, the actual production would be 80% of the budgeted quantity, which is 400 magical wands (500 wands * 0.8).
To calculate the revised fixed production overheads, we can use the proportionate relationship between the budgeted production quantity and the fixed production overheads. We multiply the actual production quantity (400 magical wands) by the ratio of the budgeted overheads to the budgeted production level:
Revised fixed production overheads = (Actual production quantity / Budgeted production quantity) * Budgeted fixed production overheads
Revised fixed production overheads = (400 / 500) * £282,000
By performing this calculation, we can determine the revised fixed production overheads based on the actual production quantity. This adjustment accounts for the lower production level and provides a more accurate representation of the overhead costs associated with the actual output of 400 magical wands.
It's important to note that the revised fixed production overheads represent an estimation based on the given information. Variations in actual costs and production levels may still occur, requiring further analysis and adjustments to accurately reflect the impact on the company's financials.
Learn more about production here
https://brainly.com/question/16755022
#SPJ11
A firm faces the production function 1 Q = f(K,L) = 80 [0, 4K-0,25 +0,4L-0,25] 0.25. It can buy the inputs K and L at prices per unit of 5 TL and 2 TL respectively. What combination of L and K should be used to maximize output if its input budget is constrained to 150 TL?
The combination of L and K that should be used to maximize output, given the input budget constraint of 150 TL, can be determined by calculating
the marginal product per unit of cost for each input and allocating the budget accordingly.To maximize output, the firm should allocate its budget in a way that maximizes the total marginal product per unit of cost. This can be done by comparing the marginal product of each input (MPK and MPL) to their respective prices (5 TL and 2 TL) and finding the ratio of marginal product to price for each input.In this case, the marginal product of K (MPK) is given by 4K^(-0.25) * (0.4L^(-0.25)), and the marginal product of L (MPL) is given by 0.4 * K^(0.75) * L^(-1.25).By dividing the marginal product of each input by its price, we can calculate the marginal product per unit of cost.For K: MPK/Price = [4K^(-0.25) * (0.4L^(-0.25))] / 5 For L: MPL/Price = [0.4 * K^(0.75) * L^(-1.25)] / 2
learn more about output here :
https://brainly.com/question/14227929
#SPJ11
Fad City sells novel clothes that are subject to a great deal of price volatility. A recent item that cost $20.30 was marked up $13.90, marked down for a sale by $6.10 and then had a markdown cancellation of $3.80. The latest selling price is: O O O O $26.40. $38.00. $31.90. $29.46.
The latest selling price of the item is $31.90. To find the latest selling price, we need to follow the given sequence of events.
The item starts at a cost of $20.30. It is then marked up by $13.90, resulting in a price of $34.20. Next, a sale markdown of $6.10 is applied, bringing the price down to $28.10. However, this markdown is canceled out by a markdown cancellation of $3.80.
To calculate the final price, we subtract the markdown cancellation of $3.80 from the price after the sale markdown, which gives us $28.10 - $3.80 = $24.30. Therefore, the latest selling price of the item is $24.30.
However, the given options do not include $24.30. Among the available options, the closest price to $24.30 is $26.40. It is important to note that none of the provided options match the calculated value exactly. Therefore, the closest option to the calculated latest selling price of $24.30 is $26.40.
To learn more about selling price refer:
https://brainly.com/question/1445853
#SPJ11
Your answer is partially correct. Try again Nunez Company expects to have cash balance of $47,000 on January 1, 2020. Relevant monthly budget data for the first two months of 2020 are as follows: Collections from customers: January $102,000; February $157,000 1 Payments to suppliers: January $60,000; February $80,000 Direct labour: January $29,000; February $46,000. Wages are paid in the month they are incurred. 3. Manufacturing overhead: January $24,000; February $31,000. These costs include deepreciation of $1,000 per month. All other overhead costs are paid as incurred 4. Selling and administrative expenses: January $15,000; February $21,000. These costs are exclusive of depreciation. They are paid as incurred. 5 Sales of marketable securities in January are expected to realize $9,000 in cash. 6 local bank. It can borrow up to $24,000. The company wants to keep a minimum monthly cash balance of $31,000 Nunez Company has a line of credit at Prepare a cash budget for January and February. Cash Budget For the Two Months Ending February 29, 2020 Month Feb Total Jan X 78000 47000 31000 Beginning Cash Balance Cash Receipts Add Collection From Customers 157000 259000 102000 Sale Of Marketable Securities 9000 9000 Total Receipts 268000 111000 157000 346000 Total Available Cash 188000 158000 Disbursements Less Direct Materials 60000 80000 140000 Direct Labour 29000 75000 46000 Manufacturing Overhead 24000 31000 55000 Selling And Administrative Expenses 15000 21000 36000 Total Disbursements 178000 306000 128000 Excess of Available Cash Over Cash Disbursements 40000 30000 10000 Financing X Borrowing 1000 21000 22000 Repayment X X Total Financing 22000 1000 21000 X 31000 31000 62000 Ending Cash Balance
A cash budget is a tool used to track the flow of cash in and out of an organization. It is important in ensuring that the organization has sufficient cash to meet its financial obligations.
A cash budget is a tool used to track the flow of cash in and out of an organization. It is important in ensuring that the organization has sufficient cash to meet its financial obligations. The cash budget for Nunez Company for January and February is as follows:Cash Budget For the Two Months Ending February 29, 2020 Month Feb Total Jan X 78000 47000 31000 Beginning Cash Balance Cash Receipts Add Collection From Customers 157000 259000 102000 Sale Of Marketable Securities 9000 9000 Total Receipts 268000 111000 157000 346000 Total Available Cash 188000 158000 Disbursements Less Direct Materials 60000 80000 140000 Direct Labour 29000 75000 46000 Manufacturing Overhead 24000 31000 55000 Selling And Administrative Expenses 15000 21000 36000 Total Disbursements 178000 306000 128000 Excess of Available Cash Over Cash Disbursements 40000 30000 10000 Financing X Borrowing 1000 21000 22000 Repayment X X Total Financing 22000 1000 21000 X 31000 31000 62000 Ending Cash BalanceThe cash balance on January 1, 2020, is $47,000. In January, the total cash receipts amount to $157,000 while in February, they amount to $102,000. Additionally, the company expects to realize $9,000 in cash from the sales of marketable securities in January. The total disbursements for January amount to $140,000 while those for February amount to $128,000. The company expects to borrow $22,000 to meet its financial obligations. It should be noted that the company wants to maintain a minimum monthly cash balance of $31,000.The excess of available cash over cash disbursements for January is $40,000 while that for February is $30,000. The ending cash balance for January is $78,000 while that for February is $62,000.
To know more about disbursements visit: https://brainly.com/question/31214335
#SPJ11
