Consider the following mechanism: Step 1 (fast): 2 A → B Step 2 (slow): B + 2 C → D + E Step 3 (fast): D + C → E + F
Choose the correct statement.

The correct answer is D) protons and neutrons.  Electrons are much smaller than protons and neutrons and have a mass of approximately 9.11 x 10^-31 kg, which is about 1/1836 the mass of a proton or neutron.

Therefore, electrons do not have a mass of 1.67 x 10^-27 kg.

Protons and neutrons are found in the nucleus of an atom, and they have almost the same mass, with protons having a mass of approximately 1.67 x 10^-27 kg and neutrons having a mass of approximately 1.69 x 10^-27 kg. Therefore, a combination of protons and neutrons can have a mass of 1.67 x 10^-27 kg.

So, the correct answer is D) protons and neutrons.

Learn more about mass here:

https://brainly.com/question/11954533

#SPJ11

The reaction is a first-order reaction with respect to a. This means that the rate of the reaction is directly proportional to the concentration of a. As the concentration of a decreases, the rate of the reaction also decreases.

In order to determine the order of the reaction, we need to first understand what the half-life represents. Half-life is the time taken for the concentration of a reactant to reduce by half its initial concentration. The half-life of a first-order reaction is independent of the initial concentration of the reactant.
Looking at the figures, we can see that the half-life of the reaction is constant. This indicates that the reaction follows a first-order reaction. In a first-order reaction, the rate of reaction is directly proportional to the concentration of one of the reactants.
In this case, the concentration of a is decreasing with time. Therefore, the reaction is a first-order reaction with respect to a. This means that the rate of the reaction is directly proportional to the concentration of a. As the concentration of a decreases, the rate of the reaction also decreases.
In conclusion, based on the constant half-life represented in the figures, the order of the reaction is first-order with respect to a. This means that the rate of the reaction is directly proportional to the concentration of a. The figures provide us with important information to determine the order of the reaction and its kinetics.

To know more about reaction visit :

https://brainly.com/question/30983146

#SPJ11

The molality of Na⁺ ions in the 6.29% by mass Na₂CO₃ solution is 1.05 mol/kg.


Molality is defined as the number of moles of solute per kilogram of solvent. In this case, the solute is Na₂CO₃  and the solvent is water.
First, we need to calculate the number of moles of Na₂CO₃  in 100 g of the solution:
Mass of Na₂CO₃  = 6.29 g
Moles of Na₂CO₃  = 6.29 g / 105.99 g/mol = 0.0593 mol
Next, we need to calculate the mass of water in 100 g of the solution:
Mass of water = 100 g - 6.29 g = 93.71 g
Finally, we can calculate the molality of Na⁺ ions:
Molality of Na⁺ ions = (0.0593 mol / 0.09371 kg) / 2 = 1.05 mol/kg
Note that we divided by 2 because Na₂CO₃ dissociates into two Na⁺ ions and one CO₃²⁻ ion.

Learn more about molality here:

https://brainly.com/question/30909953

#SPJ11

The equilibrium constant for the given reaction is 0.03125.

The balanced chemical equation for the reaction of KClO3 to form KCl and O2 is:

2KClO3(s) → 2KCl(s) + 3O2(g)

At equilibrium, the reaction quotient Qc can be calculated using the molar concentrations of the products and reactants raised to the power of their stoichiometric coefficients:

Qc = [KCl]^2 [O2]^3 / [KClO3]^2

Using the given values, we can substitute:

Qc = (1 mol/L)^2 (0.5 mol/L)^3 / (2 mol/L)^2 = 0.03125 mol/L

At equilibrium, Qc is equal to the equilibrium constant Kc. Therefore, we can write:

Kc = [KCl]^2 [O2]^3 / [KClO3]^2 = 0.03125

Substituting the given values, we can solve for Kc:

Kc = (1 mol/L)^2 (0.5 mol/L)^3 / (2 mol/L)^2 = 0.03125

for more questions on reaction

https://brainly.com/question/29470602

#SPJ11

Antonio's assumption that the raised dots on the paper represent numbers and the numbers represent letters is a reasonable starting point for understanding how dotted paper works. It reflects a common misconception about Braille, a tactile writing and reading system used by individuals who are blind or visually impaired.

However, a more accurate understanding is Rafi's suggestion that the dots represent both numbers and letters. Braille is a tactile writing system that uses combinations of raised dots in specific cell patterns to represent letters, numbers, punctuation marks, and even musical notation. Each Braille cell consists of six dots, arranged in two columns of three dots each.

In Braille, different combinations of these six dots are used to represent different symbols. For example, the letter "A" is represented by a single dot in the upper left corner of a cell, while the letter "B" is represented by dots in the upper left and upper right corners, and so on. Similarly, numbers are represented using specific combinations of dots in cell patterns.

Ham's insight that the dots represent different symbols and each symbol represents a word is not entirely accurate. While Braille can convey words, it represents individual letters and uses them to form words, just like in written text. Each cell in Braille usually represents a single letter, number, or other symbol, not an entire word.

It is important for Antonio and his classmates to understand the importance of Braille and its unique role in facilitating literacy and communication for the visually impaired. When they realize that the raised dots on the paper represent letters and numbers, they can appreciate the complexity and efficiency of the Braille system, which allows blind individuals to read, write, and access information independently.

For more such questions on Braille ,

https://brainly.com/question/13655692

#SPJ11

Molecular oxygen (O2) is used for the final electron acceptor in the electron transport chain during aerobic respiration.

Aerobic respiration is the process by which cells produce ATP (adenosine triphosphate) in the presence of oxygen. The process involves the breakdown of glucose to produce ATP through a series of steps: glycolysis, the citric acid cycle, and oxidative phosphorylation.

During oxidative phosphorylation, the electron transport chain utilizes molecular oxygen (O2) as the final electron acceptor. O2 combines with hydrogen ions to form water (H2O) as a byproduct.

This reaction generates a large amount of energy, which is used to drive the synthesis of ATP. Therefore, O2 plays a crucial role in the process of aerobic respiration by acting as the final electron acceptor in the electron transport chain.

Visit here to learn more about electron:

brainly.com/question/30010470

#SPJ11

To calculate the pH of the solution, you can use the equation: pH = pKa + log([[tex]\frac{A-}{HA}[/tex]). The pH of the solution is approximately 4.14.

Where pKa is the dissociation constant of CH[tex]_{3}[/tex]COOH, [A-] is the concentration of the conjugate base (CH[tex]_{3}[/tex]COO-) and [HA] is the concentration of the weak acid (CH[tex]_{3}[/tex]COOH).

First, you need to calculate the concentration of CH[tex]_{3}[/tex]COO- in the solution. This can be done using the stoichiometry of the reaction between CH[tex]_{3}[/tex]COOH and NaOH:

CH[tex]_{3}[/tex]COOH + NaOH -> CH[tex]_{3}[/tex]COO- + H[tex]^{2}[/tex]O + [tex]Na^{+}[/tex]

Since the mole ratio of CH[tex]_{3}[/tex]COOH to NaOH is 0.150/0.0200 = 7.5, all of the NaOH will react with the CH[tex]_{3}[/tex]COOH, producing 0.0200 mol of CH[tex]_{3}[/tex]COO-. The volume of the solution is not given, so assume a volume of 1 L for simplicity. Therefore, the concentration of CH[tex]_{3}[/tex]COO- is:

[A-] = 0.0200 mol / 1 L = 0.0200 M

The concentration of CH[tex]_{3}[/tex]COOH is already given as 0.150 M.

Now you can substitute these values into the pH equation:

pH = 4.76 + log(0.0200 / 0.150) = 4.14

Therefore, the pH of the solution is approximately 4.14.

More on pH: https://brainly.com/question/15463092

#SPJ11

Answer:

[tex] \huge{ \boxed{0.6 \: M}}[/tex]

Explanation:

The molarity of the solution given the number of moles and volume can be found by using the formula;

[tex]c = \cfrac{n}{v} [/tex]

where

c is the concentration in M , mol/dm³ or mol/L

v is the volume in L or dm³

n is the number of moles

From the question

n = 3 mol

v = 5 L

[tex]c = \dfrac{3}{5} = 0.6[/tex]

We have the final answer as

The body fluid compartment that contains higher levels of Na+, Cl-, and HCO3- is the extracellular fluid compartment (ECF).

This compartment includes interstitial fluid (fluid between cells) and plasma (fluid component of blood). Na+ and Cl- are the primary ions in ECF, accounting for around 90% of all positively charged ions in this compartment. HCO3- is an important buffer in ECF, helping to maintain acid-base balance. The concentrations of these ions in ECF are carefully regulated by the kidneys, which control electrolyte and fluid balance in the body. Imbalances in ECF electrolyte levels can lead to serious health problems, such as high blood pressure, dehydration, and electrolyte imbalances.

To learn more about body click here: brainly.com/question/1543844

#SPJ11

a. The volume is held constant in all the containers.

b. Container 4 has the particles with the most kinetic energy.

c. Container 1 has the lowest temperature

d. Container 4 has the lowest pressure.

e. Container 3 has the highest pressure.

f. The relationship above  represents the ideal gas law.

g. The ideal gas law represents a  relationship between pressure, volume, and temperature in proportionality for a fixed number of gas particles.

The ideal gas law, also called the general gas equation, is described as  the equation of state of a hypothetical ideal gas.

The ideal gas law sates that the volume of a given amount of gas is directly proportional to the number on moles of gas, directly proportional to the temperature and inversely proportional to the pressure.

Mathematically ideal gas law:

PV=nRT,

where P = pressure,

V = volume,

n = e number of gas particles,

R =  gas constant,

T = temperature.

The volume  is held constant as well as  the number of gas particles.

b. Container 4 has the most KE because it has  the highest temperature.

c. Container 1 has the lowest temperature because it has the smallest amount of kinetic energy as shown .

d. Container 4 has the lowest pressure because it has the smallest number of gas particles as well as the smallest amount of collisions with the walls of container .

e. Container 3 has the highest pressure because it has the highest number of gas particles as well as the highest amount of collisions with the walls of container .

We then can conclude that if one variable is held constant, a change being experienced in another variable will bring  an opposite change in the remaining variables.

Learn more about ideal gas law at: https://brainly.com/question/12873752

#SPJ1

The balanced equation for this reaction is: Cl2 (g) + 2KI (aq) → 2KCl (aq) + I2 (s)

In this reaction, chlorine gas (Cl2) is bubbled into a solution of potassium iodide (KI). The reactants combine to form aqueous potassium chloride (KCl) and solid iodine (I2). The equation is balanced because the number of atoms of each element is equal on both sides of the arrow. Two molecules of potassium iodide react with one molecule of chlorine gas to produce two molecules of potassium chloride and one molecule of solid iodine. This is an example of a single displacement reaction, where the chlorine replaces the iodine in the potassium iodide compound.

When chlorine gas (Cl2) is bubbled into a solution of potassium iodide (KI), the products formed are aqueous potassium chloride (KCl) and solid iodine (I2). The balanced equation for this reaction is:

Cl2 (g) + 2 KI (aq) → 2 KCl (aq) + I2 (s)

In this equation, the chlorine gas replaces iodide ions in potassium iodide, resulting in the formation of potassium chloride and iodine.

To know about chlorine:

https://brainly.com/question/19460448

#SPJ11

The correct answer for The half-life of an isotope is one day. At the end of three days, how much of the isotope remains is D) one-eighth

The half-life of an isotope is the amount of time it takes for half of the substance to decay. In this case, the half-life is one day. Therefore, after one day, half of the isotope will remain, and the other half will have decayed. After two days, half of what remained after the first day will remain, so a quarter of the original isotope will remain. After three days, half of what remained after the second day will remain, so one-eighth of the original isotope will remain. The correct answer is D) one-eighth. In conclusion, the amount of the isotope that remains after three days is determined by taking one-half of the previous day's remaining amount, resulting in one-eighth of the original isotope remaining after three days.

To know more about isotope visit:

brainly.com/question/28039996

#SPJ11

Striking a match is an example of providing activation energy to a chemical reaction (option D).

A chemical reaction is a process involving the breaking or making of interatomic bonds, in which one or more substances are changed into others.

Lighting a match is an example of chemical reaction because it involves the interaction of potassium chlorate from the match-tip and the red phosphorus (phosphorus sulfide) on the match box strip.

Upon striking the surface of this strip to create a flame and generate heat, the chemical reaction persists. Hence, striking the match stick is like an activation energy for the reaction to occur.

Learn more about activation energy: https://brainly.com/question/28384644

#SPJ1

Polymers of polysaccharides, fats, and proteins are all synthesized from monomers by the process of connecting monomers together through condensation reactions.

Condensation reactions involve the removal of a water molecule, which results in the formation of a covalent bond between the two monomers. For example, monosaccharides can be connected through glycosidic bonds to form polysaccharides such as starch and cellulose. Similarly, amino acids can be connected through peptide bonds to form proteins, and fatty acids can be connected to glycerol through ester bonds to form fats. The reverse of this process, where a polymer is broken down into its constituent monomers through the addition of water molecules, is called hydrolysis.

Therefore, option A, connecting monosaccharides together through condensation reactions, is the correct answer. This process of polymerization is a fundamental aspect of biochemistry, as it is responsible for the formation of the complex macromolecules that make up living organisms.

Learn more about Polymers here:

https://brainly.com/question/1443134

#SPJ11

Aldehydes, ketones, carboxylic acids, esters, and amides are all classes of organic compounds that contain the carbonyl group as the functional group.

The functional group C=O, known as carbonyl group, is present in several classes of organic compounds, including aldehydes, ketones, carboxylic acids, esters, amides, and many others. Aldehydes contain the carbonyl group at the end of a carbon chain, with a hydrogen atom attached to the other carbon of the carbonyl group. For example, formaldehyde (HCHO) and acetaldehyde (CH3CHO) are two common aldehydes. Ketones, on the other hand, contain the carbonyl group in the middle of a carbon chain, with two carbon groups attached to the carbonyl carbon. For example, acetone ((CH3)2CO) is a common ketone. Carboxylic acids contain the carbonyl group attached to a hydroxyl group (-OH), forming a carboxyl group (-COOH). For example, acetic acid (CH3COOH) is a carboxylic acid. Esters are formed from a reaction between a carboxylic acid and an alcohol. The carbonyl group is part of the carboxyl group, and the other oxygen is part of the alcohol. For example, methyl acetate (CH3COOCH3) is an ester. Amides contain the carbonyl group attached to a nitrogen atom. For example, acetamide (CH3CONH2) is an amide. In summary, aldehydes, ketones, carboxylic acids, esters, and amides are all classes of organic compounds that contain the carbonyl group as the functional group.

For more such questions on organic compounds

https://brainly.com/question/9436336

#SPJ11

NOTE complete question

Which of the following classes of organic compounds has C=O as the functional group?

a) Alkenes

b) Alcohols

c) Carboxylic acids

d) Aldehydes

e) Ketones

Select the correct option(s).

Metals and non-metals are the two basic groups into which we can divide all engineering materials. These two groups are further divided into the following: Ferrous Metals and Alloys

Unless there are multiple procedures for the same material, the design engineer typically chooses the required material and process concurrently. However, a material's qualities greatly depend on the processing steps that it has undergone. The engineer needs to be familiar with the fundamentals of to choose the best material for the design. These two groups are further divided into the following: Ferrous Metals and Alloys.

To know more about engineering, here:

https://brainly.com/question/31140236

#SPJ1

The reverse of an exothermic reaction is an endothermic reaction, which means it absorbs heat from the surroundings. The enthalpy change for the reverse reaction is equal in magnitude but opposite in sign to that of the forward reaction.

This means that if the forward reaction has a negative enthalpy change, indicating that it releases heat, then the reverse reaction will have a positive enthalpy change, indicating that it absorbs heat. However, the amount of heat absorbed or released by the reverse reaction is not necessarily larger or smaller than the forward reaction. It depends on the specific reaction and the conditions under which it occurs.

The reverse of an exothermic reaction is endothermic by the same amount as the forward reaction. In an exothermic reaction, energy is released, while in an endothermic reaction, energy is absorbed. The enthalpy change of the reverse reaction is the opposite in sign but equal in magnitude to that of the forward reaction, ensuring the conservation of energy.

To know about exothermic:

https://brainly.com/question/4345448

#SPJ11

The percent yield for the reaction is 24.4%. To calculate the percent yield, we need to first find the theoretical yield of P4O6, which is the maximum amount of product that could be produced if all the reactants were used up completely.

The balanced chemical equation for the reaction between phosphorus and oxygen to form P4O6 is:

4 P + 3 O2 → 2 P4O6

Using the given masses of the reactants, we can calculate the limiting reactant, which is the one that will be completely used up in the reaction.

The molar masses of phosphorus and oxygen are 30.97 g/mol and 32 g/mol, respectively.

The moles of phosphorus in the mixture is:

75.3 g / 30.97 g/mol = 2.43 mol

The moles of oxygen in the mixture is:

38.7 g / 32 g/mol = 1.21 mol

Since the ratio of P to O2 in the balanced chemical equation is 4:3, we can see that there is not enough oxygen to react completely with all the phosphorus. Therefore, oxygen is the limiting reactant.

The moles of P4O6 that can be produced from the reaction is:

1.21 mol O2 x (2 mol P4O6 / 3 mol O2) = 0.807 mol P4O6

The theoretical yield of P4O6 in grams is:

0.807 mol P4O6 x 219.96 g/mol = 177.4 g P4O6

The actual yield of P4O6 from the reaction is given as 43.3 g.

The percent yield is calculated as:

(actual yield / theoretical yield) x 100%

(43.3 g / 177.4 g) x 100% = 24.4%

Therefore, the percent yield for the reaction is 24.4%.

To know about Reactant visit:

https://brainly.com/question/30129541

#SPJ11

The chemical basis of converting light into a photographic silver image is based on the fact that light-sensitive silver halide crystals, typically silver bromide (AgBr) or silver chloride (AgCl), undergo a photochemical reaction when exposed to light.

1. A light-sensitive photographic emulsion, containing silver halide crystals, is applied to a film or paper base.
2. When exposed to light, the silver halide crystals absorb photons and create a latent image. This is due to the formation of small clusters of silver atoms (Ag) within the crystals.
3. The exposed film or paper is then developed in a chemical solution, which reduces the silver halide crystals with exposed silver atoms into metallic silver (Ag). This forms the visible image.
4. The unexposed silver halide crystals are removed during the fixing process, leaving only the metallic silver to form the final photographic image.

In summary, the chemical basis of converting light into a photographic silver image relies on the photochemical reaction of light-sensitive silver halide crystals, creating a latent image that can be developed into a visible image composed of metallic silver.

Learn more about the photochemical reaction: https://brainly.com/question/29479719

#SPJ11

To have a compound with the formula C4H11N, we can consider the possible isomers with a 2o amine and a 3o carbon atom.

A 2o amine has two alkyl groups and one hydrogen atom attached to the nitrogen atom, while a 3o carbon atom has three alkyl groups attached to the carbon atom. For a compound to contain both a 2o amine and a 3o carbon atom, there must be one nitrogen atom and one carbon atom in the molecule with the specified bonding pattern. The remaining two carbon atoms can be arranged in different ways.

The possible isomers are:

N,N-dimethyl-2-butamine

N,N-diethyl-2-methylpropanamine

Therefore, there are two compounds with the formula C4H11N that contain a 2o amine and a 3o carbon atom.

Learn more about C4H11N here:

https://brainly.com/question/17176236

#SPJ11

The maximum number of electrons that can occupy the n=4 quantum shell is 32. This is based on the formula 2n^2, which gives the maximum number of electrons that can occupy any given quantum shell. Therefore, for the n=4 shell, the maximum number of electrons that can occupy it is 2(4^2), or 32.

In quantum mechanics, electrons are arranged in shells around the nucleus of an atom. The shells are designated by the principal quantum number (n), with n=1 representing the innermost shell.

The maximum number of electrons that can occupy any given shell is given by the formula 2n^2.

For the n=4 quantum shell, the maximum number of electrons that can occupy it is 2(4^2), or 32. This means that the first three shells (n=1, 2, and 3) can hold a maximum of 2, 8, and 18 electrons, respectively, while the n=4 shell can hold a maximum of 32 electrons.

The number of electrons that actually occupy the n=4 shell in an atom depends on the specific atom and its electron configuration.

For example, the electron configuration of potassium (K) is [Ar] 4s1, which means it has one electron in the n=4 shell. On the other hand, the electron configuration of germanium (Ge) is [Ar] 3d10 4s2 4p2, which means it has a total of 18 electrons in the n=4 shell (10 in the d subshell, 2 in the s subshell, and 6 in the p subshell)

Visit here to learn more about Electrons:

brainly.com/question/860094

#SPJ11

Using the three key signals, it indicates that the pinacolone product is pure, if all three key signals are observed without any unexpected peaks.

Based on the provided NMR data for pinacolone, we can analyze the purity of the product using three key signals. Pinacolone is a ketone molecule with one keto carbonyl group, four long-chain carbons, and two branched carbons.

1. The first key signal to look for is the presence of a carbonyl group (C=O) in the chemical shift range of 200-220 ppm. A sharp peak in this region indicates the keto carbonyl group is present, which is a characteristic feature of pinacolone.

2. The second key signal corresponds to the four long-chain carbons, which typically appear in the 20-40 ppm range. Peaks in this region suggest the presence of these carbon atoms, contributing to the molecular structure of pinacolone.

3. The third key signal is related to the two branched carbons. These carbons usually show up in the 10-30 ppm range in the NMR spectrum. Peaks within this region indicate that the branched carbons are present in the pinacolone molecule.

If all three key signals are observed without any unexpected peaks, it indicates that the pinacolone product is pure. Conversely, the presence of extra peaks in the NMR spectrum may suggest impurities or side products in the sample.

More on pinacolone: https://brainly.com/question/30888003

#SPJ11

The maximum number of moles of calcium that could be deposited is 7.28 mol. It's worth noting that this calculation assumes 100% efficiency, which is unlikely in practice.

To answer this question, we need to use Faraday's laws of electrolysis, which state that the amount of substance produced during electrolysis is directly proportional to the amount of electrical charge passed through the electrolyte. We can calculate the amount of electrical charge passed using the equation:
Q = It
where Q is the electrical charge (in Coulombs), I is the current (in Amperes), and t is the time (in seconds).
In this case, we are given I = 19.47 A and t = 19.97 hours x 3600 seconds/hour = 71892 seconds. Therefore, Q = 19.47 A x 71892 s = 1.401 x 10^6 C.
To calculate the maximum number of moles of calcium that could be deposited, we need to convert the electrical charge to moles using the Faraday constant:
1 mol of electrons = 96485 C
Therefore, the number of moles of calcium deposited is:
n = Q / (2 x F)
where F is the Faraday constant, which is 2 because each calcium ion requires 2 electrons to be reduced to calcium metal.
n = 1.401 x 10^6 C / (2 x 96485 C/mol) = 7.28 mol
So the maximum number of moles of calcium that could be deposited is 7.28 mol. It's worth noting that this calculation assumes 100% efficiency, which is unlikely in practice. Additionally, the question doesn't provide information about the size of the electrode or the concentration of the calcium chloride, which could affect the amount of calcium deposited. Finally, while this calculation doesn't involve plutonium atoms directly, it's worth noting that plutonium is also a metallic element that can be produced by electrolysis under certain conditions.

To know more about calcium chloride visit :

https://brainly.com/question/664620

#SPJ11

we can use the formula Q = mcΔT, where Q is the heat energy added, m is the mass of the lead sinker, c is the specific heat of lead, and ΔT is the change in temperature. The mass of the lead sinker is 18.4 g, rounded to the nearest 0.1 g.

Rearranging the formula to solve for m, we get m = Q / (cΔT). Plugging in the given values, we get m = 145.6 J / (0.129 J/goC * 62oC) = 18.4 g. Therefore, the mass of the lead sinker is 18.4 g, rounded to the nearest 0.1 g. It is important to note that the specific heat of a substance is the amount of heat energy required to raise the temperature of one gram of the substance by one degree Celsius. In this case, the specific heat of lead is 0.129 J/goC, which means that it takes 0.129 J of heat energy to raise the temperature of one gram of lead by one degree Celsius. By using this relationship and the formula Q = mcΔT, we can calculate the mass of the lead sinker given the amount of heat energy added and the resulting change in temperature.
for more question on mass
https://brainly.com/question/20024683

#SPJ11

Answer:

10

Explanation:

the volume of C2H2 reacted with 25 moles of O2

9.85L of ethyne is needed to react with 25 L of oxygen for the reaction at STP.

The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter.

A mole is defined as the amount of substance containing the same number of atoms, molecules, ions, etc. as the number of atoms in a sample of pure 12C weighing exactly 12 g.

Given,

Volume of oxygen = 25 L

We know that 1 mole of a gas occupies 22.4 L of volume

So, 25L is occupied by 1.11 moles of oxygen.

From the reaction, 5 moles of oxygen needs 2 moles of ethyne.

1 mole of oxygen would need 2/5 moles of ethyne

Thus, moles of ethyne needed = ( 2 / 5) × 1.11

= 0.44 moles

Volume of ethyne needed = 0.44 × 22.4 = 9.85 L

Learn more about Moles, here:

https://brainly.com/question/31597231

#SPJ1

The exothermic process represented by the equation 2H2O2 (I) ---> 2H2O (I) + O2 is best classified as a chemical change because covalent bonds are broken and new covalent bonds are formed.

In this reaction, hydrogen peroxide decomposes into water and oxygen gas. The breaking of the O-O bond in hydrogen peroxide requires energy, but once the bond is broken, the energy released is greater than the energy required, resulting in an exothermic process. Entropy does increase as the process proceeds, but this is not the defining characteristic of a chemical change. Therefore, answer choice d is the correct answer.

The exothermic process represented by the equation 2H2O2 (l) ---> 2H2O (l) + O2 is best classified as a chemical change because covalent bonds are broken and new covalent bonds are formed (option d). This reaction involves the decomposition of hydrogen peroxide (H2O2) into water (H2O) and oxygen gas (O2), demonstrating a change in chemical composition and the creation of new substances.

To know about exothermic visit:

https://brainly.com/question/4345448

#SPJ11

The chemistry and cooking tool named after a famous alchemist is a Bunsen burner.

Robert Wilhelm Eberhard von Bunsen, a German chemist, is the alchemist after whom the Bunsen burner is named. It is a common tool used in chemistry labs as well as in cooking, as the flame can be adjusted to various heights and temperatures. It is also utilized for combustion reactions because of its high heat output and near-vertical flame.

It's important to remember that while it's named after Bunsen, he wasn't the inventor of the Bunsen burner, but rather a scientist who used it regularly in his work. The burner's design and invention are attributed to Peter Desaga, a student of Bunsen's.

Learn more about combustion reactions here:

https://brainly.com/question/14335621

#SPJ11

Answer:

London dispersion

Explanation:

If the IR spectrum of a reaction product contains a broad peak near 3300 cm-1, there could be other functional groups present in the sample besides an alcohol.

The 3300 cm-1 region in an IR spectrum is typically associated with the stretching vibrations of O-H bonds, which are present in alcohols, but also in other functional groups like carboxylic acids and phenols.
A carboxylic acid would show a broad peak in the same region as an alcohol, but the peak would be more intense due to the stronger hydrogen bonding in carboxylic acids. On the other hand, a phenol would show a peak in the same region as an alcohol, but it would be broader and less intense due to hydrogen bonding and resonance effects.
In addition to these functional groups, there could be other factors that contribute to a broad peak in the 3300 cm-1 region. For example, water or other solvents could be present in the sample, which would also show a peak in this region. Another possibility is that the reaction product contains impurities or other compounds that are not related to the desired product. In this case, further analysis would be necessary to determine the identity of the other compounds present.
To know more about Spectrum visit:

https://brainly.com/question/31086638

#SPJ11