At a particular temperature, H2(g)+I2(g)2HI(g) equals 64. H2 and HI have heterogenous equilibrium concentrations of 2 and 16 mollit-1, respectively.
How does the straightforward reaction 2NO g O2 g)= 2NO2 g) flow overall?Second order in NO and first order in O2 is the reaction 2NO(g) + O2(g) 2NO2(g). The observed rate of the reaction at [NO] = 0.8 M and [O2] = 3.7 M is 0.00022022 M/s.
What does the equilibrium constant Keq equal?The concentration of the reactants is high at equilibrium if Keq is a small number (Keq1). In this instance, the reaction is in favor of reactants forming. According to Keq 1, the reactants and products are present in significant quantities.
To know more about heterogenous equilibrium visit:-
https://brainly.com/question/16612856
#SPJ1
select the statements below that correctly describe where earth's three most abundant elements (iron, oxygen, and silica) are located.
The statements that describe where the earth's three most abundant elements that iron, oxygen, and silica are located are :
1) The majority of iron is located in the core.
2) Silica is abundant in the mantle and the crust.
3) The majority of oxygen is located in the crust and mantle.
1) The majority of iron is located in the core. The crust is estimated to have about 85% iron.
2) Silica is abundant in the mantle and the crust. Silica compounds are compounds that mainly found in the mantle and the crust.
3) The majority of oxygen is located in the crust and mantle. Oxygen is often called as atmospheric gas, it is found mainly on the crust, and oxygen is the second most abundant element on the earth.
To learn more about element here
https://brainly.com/question/6033100
#SPJ4
A student is demonstrated a transformation of kinetic and potential energy in a system using the pendulum shown below at which point is the system does the pendulum bob demonstrate minimum potential energy 
The potential energy of the pendulum can be modeled off of the basic equation PE = mgh.
How do you find the potential and kinetic energy of a pendulum?where h is the height and g is the acceleration brought on by gravity. This equation is frequently used to simulate items falling freely.The pendulum is not falling freely; instead, it is restrained by the rod or string.
As a result, we must express the height in terms of the angle and the pendulum's length L. Therefore, h = L(1 - COS) The formula for kinetic energy is KE= 12mv2, where m is the pendulum's mass and v is its speed. The pendulum is temporarily immobile when it is at its highest point (Point A).
There is no kinetic energy in the pendulum; all of its energy is gravitational potential energy. If friction and other non-conservative factors are ignored, we see that in a straightforward.
To learn more about potential and kinetic energy refer to :
https://brainly.com/question/18963960
#SPJ1
A scientist calculated that 10% of the collisions that occur for a specific reaction are in the correct orientation for a reaction to occur, but they found experimentally that the actual number of reactions that occurred was much lower than their calculation. Which factor did they forget to account for?
The collisions that produce products are the effective collisions. As a consequence, there will be more atom-to-atom collisions.
The collision frequency is defined by the collision theory as the quantity of collisions per unit volume of the reaction mixture. The collisions that produce products are effective collisions. The following two factors affect effective collisions: - 1. The appropriate orientation of the molecules at the time of impact is necessary for the production of products. 2. The energy of the molecules colliding must be greater than a certain threshold energy in order for the collision to be successful. Reactant molecules gain energy when the temperature of a reaction mixture rises, causing them to travel quickly from one spot to another. As a consequence, there will be more atom-to-atom collisions. As a result, the rate of reaction increases. So, it follows that as the temperature of a reaction rises, more collisions take place and the reaction time shortens.
Learn more about Collision frequency here:
https://brainly.com/question/15966627
#SPJ4
Some automobiles and buses have been equipped to burn propane (C_3H_8). Compare the amounts of energy that can be obtained per gram of C_3H_8(g) and per gram of gasoline, assuming that gasoline is pure octane, C_8H_18(l). (See Example 6.11.) Look up the boiling point of propane.
Propane will release a higher amount of energy per gram than octane.
The known heat of combustion for propane is −50.3kJ/g which means that one gram of the hydrocarbon will release or give -50.3 kJ of energy. On the other hand, the heat of combustion for octane is −47.9kJ/g. The heat of combustion for octane tells us that if we burn one gram of octane, it will give 47.9 kJ of energy.
Based on the values we provide for the question, propane will release a higher amount of energy per gram than octane.
What is energy?
Common forms of energy include kinetic energy of a moving object, potential energy stored by an object (for example due to its position in a field), elastic energy stored in a fixed object, chemical energy associated with chemical reactions, radiation. energy carried by electromagnetic radiation and internal energy contained in a thermodynamic system. All living organisms constantly receive and release energy.To know more about energy, click the link given below:
https://brainly.com/question/29763772
#SPJ4
Determine a starting alkene that could produce each of the following alcohols and provide the reagents necessary to produce the alcohol.
2-methyl-1-propanol and 2-Methylpropene alcohols and provide the reagents necessary to produce the alcohol.
What is alkene?Alkenes are a class of organic compounds that contain a carbon-carbon double bond. They are unsaturated hydrocarbons, meaning they contain fewer hydrogen atoms than the corresponding alkanes. Alkenes are relatively reactive molecules, and they are used in a variety of industrial processes, such as the manufacture of plastics, detergents, and solvents. Alkenes are also important intermediates in organic synthesis, and they form the basis of many important biochemical molecules.
1. 2-methyl-1-propanol
Starting Alkene: 2-Methylpropene
Reagents: H2O, H2SO4, and H3O+
2. 3-methyl-2-butanol
Starting Alkene: 3-Methyl-2-butene
Reagents: H2O, H2SO4, and H3O+
To know more about alkene click-
https://brainly.com/question/10113466
#SPJ4
When we buy artificial jewellery after sometime it looks worn off. Why so?
When we buy artificial jewelry after sometime it looks worn off because of the chemical reactions of the materials which are used in making the jewelry.
What is a Chemical reaction?This is referred to as the process in which one or more substances, the reactants, are converted to one or more different substances, the products under various types of conditions.
When artificial jewelry is made, it may be coated with a layer of plating, such as gold or silver, to give it a more attractive appearance which is therefore subject to various types of reactions when in contact with substance such as oil, sweat etc which us why it looks worn off after some time.
Read more about Chemical reaction here https://brainly.com/question/16416932
#SPJ1
programmable transition metal dichalcogenide homojunctions controlled by nonvolatile ferroelectric domains. true or false
programmable transition metal dichalcogenide homojunctions controlled by nonvolatile ferroelectric domains: False
What is the nonvolatile ?
Nonvolatile memory is a form of computer memory that can retain stored data even when the power is turned off. Unlike volatile memory, which requires a constant electrical charge to maintain stored data, nonvolatile memory does not require power to retain information. Common types of nonvolatile memory include read-only memory (ROM), flash memory, and most types of magnetic storage devices, such as hard drives or tape drives. Nonvolatile memory is used in a variety of applications, including embedded systems, personal computers, game consoles, and other digital electronics.
To learn more about nonvolatile
https://brainly.com/question/29005051
#SPJ4
identify the reducing and oxidizing agents and determine the species that is oxidized and the species that is reduced.a. mg + Fe2+ ------ Mg2+ + Feb. Cu2+ + Sn -------- Sn2+ + Cuc. H2 + CH2=CH2-------- CH3CH3
T he H2 + CH2=CH2-------- CH3CH3 is the reducing and oxidizing agents .
What is reducing agents?
The electron donor is a reducing substance, which is usually in one of its lower oxidation states. Because it gives up electrons in the redox reaction, a reducing agent becomes oxidized. The earth metals, formic acid, and sulfite compounds are a few examples of reducing agents.
What is oxidizing agents?
A substance or element that participates in an oxidation-reduction (redox) reaction and receives electrons from a separate species is known as an oxidizing agent. An oxidant is a chemical molecule that readily exchanges oxygen or other material atoms for an electron.
Therefore, H2 + CH2=CH2-------- CH3CH3 is the reducing and oxidizing agents.
Learn more about reducing agents from the given link.
https://brainly.com/question/12549467
#SPJ4
which one of the following is the primary difference between an anaphylactic reaction and an anaphylactoid reaction?
The condition anaphylaxis requires the reaction to be mediated through Ig E antibodies while an anaphylactoid reaction doesn’t need the presence of Ig E antibodies for a hypersensitive reaction to occur.
Anaphylactic and anaphylactoid reactions are both life-threatening events that result from a misdirected and overreactive immune response to a substance that is viewed by the body as a foreign substance. This foreign substance intervening the immune system is referred to as an antigen. The reactions are systemic, which involve multiple organ systems, and are direct results of the release of chemical mediators from basophils and mast cells.
An anaphylactic reaction occurs only after the patient/carrier has been previously exposed, for at least once, to the antigen and is then sensitized; while an anaphylactoid reaction can occur following a single, first-time exposure to a certain or some certain agents in non-sensitized patients.
Hence, for the reason that anaphylactic and anaphylactoid reactions produce the same clinical manifestations, they are treated exactly the same way and we use the term anaphylaxis to refer to both conditions.
Learn more about anaphylactoid reaction here:
https://brainly.com/question/14470162
#SPJ4
An ad claims that a supplement helps a person lose weight, helps curb appetite to snack less, raises levels of serotonin to make a person feel less hungry, blocks new fat from forming, and increases metabolism to have more energy and burn existing fat. The manufacturer of the supplement published the data from the study of the product.
The study of the supplement used 100 subjects between the ages of 20 and 65. Of the 100 participants, 50 were male and 50 were female. Once the participants were selected for the study, each had the visceral fat measured. After all 100 participants were measured, it was determined that each had a measurement of more than 90 centimeters.
The testing subjects were divided into two groups. One group of 50 received the supplement and one group of 50 received a placebo. The study lasted for 16 weeks, but after 12 weeks, both groups were given the placebo.
After 16 weeks, men in both groups had a slight decrease in body weight. At the end of the study, the group receiving the supplement had reduced visceral fat when compared to the placebo.
After reading this data summary, what do you think? Answer the following questions in a post. Each question is worth 2 points.
Based on the testing data of the supplement, were any of the product's claims, proven correct? If so, identify the claims.
What data led you to that conclusion?
Which of the product's claims, if any, were not proven to be correct?
What type of testing data would you need to see in support of those claims to believe they were true?
When you see a product advertised on social media, how can you determine whether it is making reliable claims?
The claim that the supplement helps a person lose weight, helps curb appetite to snack less, raises levels of serotonin to make a person feel less hungry, blocks new fat from forming, and increases metabolism to have more energy and burn existing fat, were not proven to be correct in this study.
The data that led me to that conclusion is:
The data from the study showed that the supplement had no significant effect on weight loss, appetite, serotonin levels, new fat formation, and metabolism. The only claim that was proven to be correct was that the supplement reduced visceral fat when compared to the placebo.Which of the product's claims, if any, were not proven to be correct?All the claims made by the product, except reducing visceral fat, were not proven to be correct in this study.
The type of testing data would you need to see in support of those claims to believe they were true is:
I would need to see more data from a larger, randomized, double-blind, placebo-controlled study that would show that the supplement has a significant effect on weight loss, appetite, serotonin levels, new fat formation, and metabolism. This study should also have a longer duration, and measure a variety of other outcomes such as body composition, and hormone levels.When you see a product advertised on social media, you should be skeptical of the claims made by the product, especially if it seems too good to be true. Look for products that have been studied and the data is readily available, avoid products that make claims that seem too good to be true, and be wary of products that are marketed as "miracle cures" or that are marketed as cures for serious diseases or illnesses. Additionally, you can check if the product has been approved by the FDA and if it has any certifications or awards from reputable organizations.
Learn more about Data testing from
https://brainly.com/question/17399396
#SPJ1
one effect of a catalyst being added to a reaction mixture is to increase the rate of a chemical reaction without becoming part of the products.True
False
The statement that one effect of a catalyst being added to a reaction mixture is to increase the rate of the chemical reaction without becoming the part of the products is true.
Definition of a catalyst - A catalyst is any substance which increases the rate of any chemical reaction without being consumed in that reaction. A catalyst works by providing an alternate or a different pathway for the reaction, one which has a lower activation energy than that of the uncatalyzed pathway. This lower activation energy applies/means that a larger fraction of collisions are successful at any given temperature, leading to or resulting in an increased reaction rate.
Catalysts are primarily/mainly categorized into four types. They are
(1) Homogeneous,
(2) Heterogeneous (solid),
(3) Heterogenized homogeneous catalyst, and
(4) Biocatalysts.
Learn more about catalyst here:
https://brainly.com/question/28813725
#SPJ4
what pressure will be required to comprise 350cm³ of hydrogen at 700mmhg to 300cm³ provided the temperature remains constant
At a constant temperature of 700 mmHg, 882 mmHg of pressure is necessary to compress 350 cm3 of hydrogen to 300 cm3 of hydrogen.
Explain about the ideal gas law.In this query, the ideal gas law is utilized. According to the ideal gas law, the ratio of an ideal gas' pressure, volume, and temperature is given by the equation P1V1 = P2V2, where P1 and V1 stand for the gas' beginning pressure and volume and P2 and V2 represent the gas' final pressure and volume, respectively.
Determine how much pressure is different.
P2 - P1 = 0.0046828 kPa
Calculate the pressure difference in mmHg in step six.
A kPa equals 7.50062 mmHg.
In mmHg, 0.0046828 kPa is 0.3505
Increase the original pressure by the difference in pressure.
P1 plus 0.3505 mmHg equals 882 mmHg.
As a result, 882 mmHg of pressure is needed to compress 350 cm3 of hydrogen into 300 cm3 at a constant temperature of 700 mmHg.
To learn more about the ideal gas, visit
brainly.com/question/28257995
#SPJ1
calculate the total number of carbon atoms represented in all of the rubp molecules used in one turn of the calvin cycle.
Carbon dioxide (CO2) enters plants through stomata in the leaves, where it diffuses through intercellular spaces over small distances until it reaches the mesophyll cells.
what is meant by mesophyll cells?
Mesophyll conductance is an essential part of photosynthesis, and during the past two decades, its significance for an accurate definition of photosynthetic constraints has grown. A complex process including both biochemical and anatomical components, carbon dioxide diffusion over the leaf mesophyll. The main factors affecting it are cell wall thickness, chloroplast distribution, and aquaporins. In the past ten years, mesophyll conductance has drawn more attention as a fundamental factor in photosynthesis under water stress and as a potential target for increasing plant productivity and water usage effectiveness. The focus of this chapter will be on the mesophyll conductance's response to water stress and recovery, including drought adaptation, and how important it is in limiting photosynthesis in water-limited circumstances.
To know more about mesophyll cells refer to:
https://brainly.com/question/15897351
#SPJ4
The ratio of a weak acid and its conjugate base at the point of maximum buffering capacity is a. 1/1 b. 1/10 c. 10/1 d. no definite ratio is needed
Option (a) is correct. The ratio of a weak acid and its conjugate base at the point of maximum buffering capacity is 1 : 1.
Weak acids are the acids which do not completely dissociate into their constituent ions when dissolved in solutions. It partially dissociates into its ions in an aqueous solution or water. Weak acids does not produce many hydrogen ions when it is in an aqueous solution. Conjugate base is said to be the particle that is left over after the acid loses its hydrogen ion. Conjugate bases are negatively charged and have high pH values. Conjugate base is produced when an acid loses a hydrogen ion.
According to Henderson-Hasselbalch Equation for the reaction is,
pH = PKa + log [base] / [acid]
At the point of maximum buffering capacity the concentrations of acid and base are equal. so, the logarithm of the concentrations of the acid and base is equal to 0. so the ration become 1:1.
To learn more about Henderson-Hasselbalch Equation please visit:
https://brainly.com/question/13423434
#SPJ4
Use the changes in oxidation numbers to determine which elements are oxidized and which are reduced in these reactions. (Note: it is not necessary to use balanced equations)
Reaction 1: Na + Cl2 → NaCl,In this reaction, sodium (Na) is oxidized and chlorine (Cl) is reduced. The oxidation number of sodium changes from 0 to +1, and the oxidation number of chlorine changes from 0 to -1.
What is the sodium ?
Sodium is an essential mineral found in small amounts in many foods. It is an important electrolyte that helps to regulate the amount of water in and around cells, maintain blood pressure, and support nerve and muscle function. While sodium is important for good health, too much of it can be harmful. Consuming too much sodium can lead to high blood pressure, heart disease, stroke, and other health issues. People are advised to limit their sodium intake to no more than 2,300 milligrams per day, with an ideal daily limit of 1,500 milligrams.
To learn more about sodium
https://brainly.com/question/25597694
#SPJ4
Which of the following formulas for ionic compounds are written correctly?O Mg3(PO4)2 O CaCO3 O Na(OH) KSo4 O NaNO3
Option (a) is correct. Magnesium phosphate is an ionic compound having the formula [tex]Mg_{3} (PO_{4} )_{2}[/tex] .
The Ionic compounds are the type of chemical compound where the oppositely charged ions of a metal and a nonmetal are attracted to each other to form an ionic bond. The compound formed from the bonded ions have different properties from the elements that make up the compound. Ionic compounds containing basic ions hydroxide (OH−) or oxide (O2−). These are classified as bases. Ionic compounds can be formed by acid–base reactions. Ionic compounds can be produced from their constituent ions by evaporation of the solvent, precipitation, freezing and a solid-state reaction. It can form by the electron transfer reaction of reactive metals with reactive non-metals.
To learn more about Ionic compounds please visit:
https://brainly.com/question/977324
#SPJ4
) determine if the following compounds contain ionic or covalent bonds or both. [note: many of these molecules contain polyatomic ions. if so, indicate where the ionic and covalent bonds exist. for example, the molecule ammonium carbonate is an ionic compound, but it contains two polyatomic ions that are held together by covale
1. Ammonium Carbonate: Ionic, with two polyatomic ions held together by covalent bonds.2. Carbon Dioxide: Covalent,3. Sodium Chloride: Ionic,4. Magnesium Oxide: Ionic,5. Water: Covalent.
What is the Carbon Dioxide ?
Carbon Dioxide (CO2) is a colorless, odorless, non-flammable gas that is present in the Earth's atmosphere in trace amounts. In its natural form, it is produced by the natural breakdown of organic material. It is also a by-product of the burning of fossil fuels and other combustion processes. CO2 is an important part of the global carbon cycle, and plays a key role in regulating the Earth's climate. It is also used in a variety of industries, including the food and beverage industry, in the production of carbonated drinks, and in fire extinguishers. It is also used in greenhouses to increase the amount of carbon dioxide available for plant growth. In addition, it is used in carbon capture and storage technologies, where it is captured from the atmosphere and stored underground.
To learn more about Carbon Dioxide
https://brainly.com/question/25385913
#SPJ4
Every mineral has properties that make it unique. Look over the
minerals below and match each mineral with its picture and
properties listed below.
Talc
Sulfur
Fluorite
Halite
Pyrite
Diamond
Also 4) green or yellow tone used in toothpaste
And 8) taste doesn’t leave much streak
A mineral's other physical characteristics and the form that its crystals assume can differ. Kyawthuite is the rarest mineral on the planet. There is just one crystal known to exist, and it was discovered in Myanmar's Mogok region.
What is the most unique mineral?On our globe, minerals can be found in a variety of forms, from genuine gem-like hidden treasures to dazzling flecks in sand or gravel. Minerals are organic, or naturally occurring elements or compounds that do not contain carbon, according to the U.S. Geological Society(opens in new tab). Every kind of mineral has a distinct chemical composition and a well-ordered interior structure. Along with other physical characteristics, a mineral's crystals can take on many shapes.Kyawthuite is the most uncommon mineral in the world. In the Mogok region of Myanmar, there is only one crystal that has been identified. It was given official recognition by the International Mineralogical Association in 2015, according to Caltech's mineral database(opens in new tab), and is a tiny (1.61-karat), deep orange gemstone.To Learn more About mineral's Refer To:
https://brainly.com/question/15844293
#SPJ1
A compound melting at 134∘ was expected to be either aspirin (135∘) or urea (133∘).Explain how you could determine whether one of these two suspected compounds was identical to the unknown compound without using any form of spectroscopy.
One method of determining the identity of the unknown compound without using any form of spectroscopy would be to perform a series of chemical tests.
What is the spectroscopy ?
Spectroscopy is an analytical technique used to measure the energy of radiation emitted or absorbed by a sample. It is used to study the composition and structure of matter by analyzing the interaction of radiation with the sample. Spectroscopy is used in many areas of science and engineering, such as astronomy, medicine, and materials science. It is also used to identify unknown substances and to measure the concentrations of different components in a sample. Spectroscopic measurements can determine the chemical composition of a sample, its physical properties, and even the temperature of a sample. Spectroscopy can also be used to measure the distance between two objects, or to monitor the motion of stars and galaxies. Spectroscopy is an invaluable tool for scientists and engineers in many fields.
To learn more about spectroscopy
https://brainly.com/question/14854785
#SPJ4
At a presentation for undergraduate students, a lecturer explained that even a small quantity of potassium metal can react explosively when exposed to water, igniting with purple flames and ricocheting wildly across the surface of the water. He showed the students a small demonstration of this reaction with a tiny fragment of potassium in a large beaker, and then explained, "While this reaction is fascinating to observe, none of you should attempt to recreate this effect outside of a controlled laboratory setting, as this reaction can be dangerous and difficult to control." Inspired by the presentation, a student broke into a lab on campus and stole a large quantity of potassium metal and put it in a lake on campus to simulate a fireworks display. The ensuing explosive reaction spread across the entire lake, causing massive property damage and injuring a professor who was feeding ducks by the lake. The professor can establish that but for the lecturer's demonstration, the student would never have thought to put the potassium in the lake. The applicable jurisdiction has adopted a pure several liability theory of recovery.
Assuming that the professor has a valid claim against the student for negligence, is the professor likely to prevail in an action against the lecturer?
Answers:
A. No, because the lecturer neither authorized nor encouraged the student's negligent conduct.
B. No, because the student was not an employee of the lecturer.
C. Yes, because the lecturer's demonstration gave the student this idea, making him a but-for cause of the professor's injuries.
D. Yes, but only for the lecturer's proportionate share of the professor's damages.
Duty, Breach, Cause, and Harm are the four components that a plaintiff must demonstrate in order to succeed in a negligence claim.
Which factors does a plaintiff need to prove in a negligence case in order to win? 1) Duty, 2) Breach, 3) Cause, and 4) Harm are the four components that a plaintiff must demonstrate in order to succeed in a negligence claim.In most civil injury lawsuits, the defendant is accused of negligence.A victim who sues for negligence must prove four things in order to prevail: (1) the offender owed the victim a duty; (2) the wrongdoer breached the obligation; (3) the violation resulted in the injury; and (4) the victim suffered damages.The plaintiff is required to show a cause-and-effect connection between the defendant's negligence and the harm before negligence law can hold the defendant accountable for the plaintiff's damages.So, the primary element of carelessness that establishes a connection between the defendant's wrongdoing and the plaintiff's harm is causation.To learn more about negligence case refer
https://brainly.com/question/25911081
#SPJ4
Definition of conjugated fatty acid
Answer: Some conjugated fatty acids may confer health benefits ranging from the prevention of hypertension to protection against certain forms of cancer, although more research is needed to confirm such effects.
Conjugated fatty acids include isomers of linoleic acid. Conjugated analogues linoleic acids are the most investigated conjugated fatty acids. The reason why the isomer of conjugated fatty acids are studied is because they have the potential to treat human illnesses. A biological activity that conjugated fatty acids have been studied for is the reduction of body fat and the increasing of lean body mass.
Some conjugated fatty acids may confer health benefits ranging from the prevention of hypertension to protection against certain forms of cancer, although more research is needed to confirm such effects.
it is possible for two elements to combine in different ways to form two or more different compounds, such as co and co2. when this occurs, the different masses of element b that combine with a fixed mass of element a can be expressed as a(n) of small numbers. this observation is summarized by the law of proportions.
Yes, two elements can combine in different ways to form different compounds.
How it is possible for two element to combine in different ways?
For example, co and co2 are two different compounds that can be formed from the combination of carbon (C) and oxygen (O)
The law of proportions states that when two elements combine to form different compounds, the different masses of the second element that combine with a fixed mass of the first element can be expressed as a ratio of small whole numbers.
This observation is based on the fact that the elements tend to combine in specific ratios and not in any proportion.
The law of proportion is one of the basic principles of stoichiometry, the branch of chemistry that deals with the quantitative relationships between reactants and products in a chemical reaction.
This law is also known as the Law of definite proportions or Proust's Law.
The law of proportions is important for determining the composition of a compound, and for predicting the outcomes of chemical reactions.
To learn more about law of proportion refer:
https://brainly.com/question/13398611
#SPJ4
The binding of glucose to hexokinase O a. is an example of induced-fit binding of a substrate to the active site of an enzyme. b. is not well characterized. O c. is an example of lock-and-key binding of a substrate to the active site of an enzyme. d. differs from the binding of substrates to other kinases.
The binding of glucose to hexokinase O is an example of lock-and-key binding of a substrate to the active site of an enzyme.
What is lock-and-key binding?
Lock-and-key binding is a type of macromolecular recognition in which the shape of a molecule, known as the "key", fits into the shape of a receptor molecule, known as the "lock". This type of binding is based on the complementary shapes of the two molecules and the weak interactions between them. The key molecule usually binds to the lock molecule with a high degree of specificity and affinity, meaning that the key will only fit into its corresponding lock. This type of binding is essential for many biological processes such as enzyme catalysis and signal transduction.
To learn more about lock-and-key binding
https://brainly.com/question/7197043
#SPJ4
Which of the following compounds would have Lewis dot diagrams constructed with the same number of valence electrons as NH4+?
H2O, The ammonium ion, NH4+ has 5 valence electrons from the nitrogen, 4 valence electrons from the hydrogens (1 from each hydrogen). The "+" indicates that one valence electron was lost. Therefore, the total number of valence electrons of NH4+ are: 5 + 4 - 1 = 8 valence electrons.
What is meant by hydrogens?
Methane, also known as natural gas, can be replaced with hydrogen, a clean fuel. It is the most prevalent chemical element and is thought to make about 75% of the universe's mass. Numerous hydrogen atoms can be found in water, plants, animals, and, of course, people here on earth.Fuel cells may produce energy, power, and heat using hydrogen. The two industries where hydrogen is currently most widely employed are fertilizer manufacturing and petroleum refining, with the developing markets of utilities and transportation.Around room temperature and pressure, hydrogen is a gas, but at -423 degrees Fahrenheit, it condenses into a liquid.To learn more about hydrogens refer to
https://brainly.com/question/24433860
#SPJ4
In an Experiment a fuel raised the temperature of 500g of water by 4 degree C.
a) work out the energy released in the experiment.( It takes 4.2J of energy to raise the temperature of 1g of water by 1 degree C)
Answer:
The energy released in the experiment is (500g)(4 degrees C)(4.2 J/g-degree C) = 8,400 J.
Explanation:
a metal is reacted with hcl to produce hydrogen gas. the mass of th mtal that reacts with one mole of hydrochloric acid is
A metal is reacted with the HCl to produce the hydrogen gas. The mass of the metal that will reacts with one mole of the hydrochloric acid is 23 g.
The metal that will react with the hydrochloric acid, HCl is the metal sodium, Na. The reaction is given as :
2Na + 2HCl ---> 2NaCl + H₂
The moles of the HCl = 1 mole
2 moles of Na react with the 2 moles of the HCl
moles of the Na = 1 mole
The molar mass of Na = 23 g/mol
The mass of Na = moles × molar mass
= 23 × 1
= 23 g
To learn more about moles here
https://brainly.com/question/29799279
#SPJ4
classify each element correctly according to its general position on the periodic table. s s drop zone empty. cu cu drop zone empty. ca ca drop zone empty. si si drop zone empty. main-group metal metalloid nonmetal transition metal
According to the position of the molecule in periodic table, S is nonmetal: Cu and Ca are metal: and Si is a metalloid.
Calcium (Ca) is a metal since it is an element that forms positive ions and has metallic bonding.
Copper (Cu), a mineral and element, is a significant industrial metal due to its excellent ductility, malleability, thermal and electrical conductivity, and corrosion resistance.
Sulfur (S) is a member of the third period and family, which is the oxygen family (chalcogens family). Because the electrons are not free to flow, it is a bad conductor of heat and electricity. Sulfur lacks luster and forms sulfur dioxide, an acidic substance, when it interacts with oxygen, making it non-metallic.
Silicon (Si) is categorized as a metalloid because some of its properties are comparable to those of metals and others to those of nonmetals. For instance, silicon has a bluish-gray metallic luster and is considered to be a poor conductor of electricity.
learn more about periodic table here:
brainly.com/question/11155928
#SPJ4
The actual question is:
Sort each element into groups based on where it is located on the periodic table.
Element:
Ca, S, Si and Cu
properties:
Metal, Nonmetal and Metalloid
Which of the following descriptors best describes the stereoconfiguration of the molecule below? Z E cis trans
The following descriptors best describes the stereo configuration of the molecule below is the E configuration.
The cis / trans configuration are determine for the molecules which have the two similar substituents. But in this case all the four substituents attached to the double bonded carbon is deferent.
The E / Z configuration is determine by the whether the higher priority group on the each carbon is on the same side or the opposite side of the double bond. Since the high priority groups are on the opposite side, then the alkene has an E configuration.
Thus, the given molecule has the E configuration.
To learn more about E/Z here
https://brainly.com/question/26624086
#SPJ4
How many atoms of oxygen are in 2 Al(OH)3?
3
6
1
2
Answer: 3
Explanation: For every one aluminum ion, there are three hydroxide ions. Therefore, there are three atoms of oxygen and three atoms of hydrogen.
Answer:
6
Explanation:
there are two moles of Al(OH)3
each Al(OH)3 has three moles of oxygen
so in total 2 * 3 = 6
To practice solving percentage composition problems, a student made a series of circle graphsshowing the composition of a sample of carbon dioxide (CO2). Graph A is based on a sample that is 100% CO2. Graph B represents the mass fractions of a 100.0-g sample of CO2. Graph Crepresents the mass fractions of a 23.5-g sample of CO2.Which graph displays an incorrect composition relationship? A. Graph A B. Graph B C. Graph CD. All of the graphs are correctBased on the data shown in Graph C, how many atoms of carbon are there in a 23.5-g sample of CO2? F. 2.26 x 10^23 atoms G. 3.21 x 10^23 atoms H. 6.02 x 10^23 atomsJ. 1.18 x 10^24 atoms
The statement that the graphs of f and g are parallel and that the graph of f is translated 23 units down to create the graph of g is correct because the function f(x) = x was changed to form g(x) = f(x) -23.
The letter C is the response to your query. 2.906 x 1023 atoms Explanation: Data, Lead weighs 100 g. There are?number of atoms. Process: 1. Check the periodic chart for Lead's atomic number. Atomic weight is 207.2 g. 2.- To determine the number of atoms, use proportions and the Avogadro number. 207.2 g. 6,023,1023,023 atoms. 100 g. x = (100 x 6.023 x 10²³) / 207.2. x = 6.025 x 10²⁵ / 207.2. x equals 2.906 x 1023 atoms. Translation of a geometric figure in geometry involves adding a digit (11) to the value on the x-coordinate (x-axis) of the pre-image and subtracting a digit (8) from the value on the y-coordinate (y-axis) of the pre-image.
Learn more about Translation here:
https://brainly.com/question/29345544
#SPJ4
