Consider the ionization energy (IE) of the magnesium atom. Which of the following is not true? Select one: a. The IE of Mg is lower than that of sodium. b. The IE of Mg is lower than that of neon. c. The IE of Mg is lower than that of beryllium. d. The le of Mg is higher than that of calcium. e. The IE of Mg is lower than that of Mgt.

Rosuvastatin is a dihydroxymonocarboxylic acid that is used to treat (6E) -7-{4-(4-fluorophenyl)-2-[methyl(methylsulfonyl)amino] Two hydroxy substituents are present at positions 3 and 5 in the compound 6-(propan-2-yl)pyrimidin-5-yl hept-6-enoic acid (the 3R,5S-diastereomer).

Since its introduction, rosuvastatin has lived up to its initial expectations as a very effective statin that has positive effects on HDL, demonstrates a decline or cessation in the atherosclerotic burden, and lowers cardiovascular events in reduced patients.

Rosuvastatin is typically used once daily. Since you can use it whenever you choose, it's better to consume it at the exact hour each day. Taken with or without food, rosuvastatin typically won't make you feel sick.

To know more about rosuvastatin visit:

https://brainly.com/question/24891584

#SPJ4

The correct Option is (D), Reaction formation is a defense mechanism in which an individual acts exactly the opposite of his/her unacceptable impulses.

In sublimation, the form is altered without the essence. Converting the outlet or means of expression out of something negative and improper to a more positive or acceptable entails changing anything from solid to vapor in the physical sense.

Molecules are transferred from the solid phase to a gas phase during sublimation. Because substances always release the heat while freezing because the solid phase has a lower energy than that of the liquid phase, Efus(sl)>0.

To know more about sublimation visit :

https://brainly.com/question/28626755

#SPJ4

The new pressure of the gas is 2.75 atm.

Standard temperature and pressure refers to the conditions at temperature 0°C or 273K and pressure 1 atm.

According to Boyle's law, "The volume of a given amount of gas held at constant temperature varies inversely with the applied pressure when the temperature and mass are constant. "

This means that with the increase in volume increases, there will be a decrease in pressure and vice versa.

This gas law  equation is represented as:

P₁V₁ =P₂V₂

where,

P₁ and P₂ are initial and final pressure respectively.

V₁ and V₂ are initial and final volume respectively.

Given here,

P₁= 1 atm

V₁= 1.24 L

V₂= 451 ml = 0.451 L

To find: P₂

using the equation,

P₁V₁ =P₂V₂

⇒1 × 1.24 L = P₂ × 0.451 L

⇒  P₂ = 2.75 atm

Thus, the new pressure is 2.75 atm

To know more about standard temperature and pressure here

https://brainly.com/question/14047937

#SPJ4

The discrepancy between the atomic masses and the masses number of the atomic (M) is equal to the amount of neutrons (Z).

In contrast to the hydrogen nucleus, which has a single proton, neutrons are necessary for the durability of nuclei. Nuclear fusion or fission generate a ton of neutrons. Through fusion, fusion, and spontaneous fission processes, they are a major contributor to the planetary formation of fundamental particles within stars.

Hydrogen = 0 neutrons

Helium = 2 neutron

lithium=4 neutron

beryllium=5 neutron

boron = 6 neutron

carbon = 6neutron

nitrogen=7n

oxygen= 8n

fluorine= 10n

neon= 10n

sodium= 12n

magnesium= 12n

aluminum = 14 n

silicon= 14n

phosphorus= 16n

sulphur= 16n

chlorine= 18 n

argon= 22 n

potassium= 20n

calcium= 20n

To know more about neutrons visit:

https://brainly.com/question/29771588

#SPJ1

The chemical reaction in which NO2^- acts as a base is; H30^+(1) + NO2^- (aq) HNO2(aq) +

H2O(1)

According to the Brownstead - Lowry definition of acids and bases, an acid is any substance that donates a proton while a base is any substance that accepts a proton. Hence, the NO2^- ion acts as a base in reactions where it accepts a proton to yield its conjugate acid.

Learn more about chemical reaction at https://brainly.com/question/11314881.

#SPJ4

An element in which the highest occupied s and p sublevels are filled is called a noble gas or an inert gas.

The noble gases are a group of elements in the periodic table that are located in the far right column, these elements are helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), and radon (Rn).

The noble gases have a full valence shell, meaning that their outermost electron shell is filled with the maximum number of electrons. This gives them a stable electron configuration and makes them unreactive with other elements. Because of this, they are also referred to as "inert" gases.

Noble gases are chemically unreactive due to their filled valence shells, which makes them a unique group of elements and they are used in a wide range of industrial and medical applications.

a) 0.47 mol ethanol having volume about  2.24 liters.

b) 1.24 mol ethanol having volume about 5.9L.

c) 1.3×10⁻² mol ethanol having volume about 0.062L.

The ratio of a substance's given mass in a chemical reaction to the mass of one mole of that substance determines the number of moles of that substance. The Avogadro number, or 6.023×10²³, is equal to one mole of any substance.

We have 0.210M ethanol solution

Molarity = no of moles /v in ml

0.47 mol ethanol

0.210M = 0.47/ /v in liters

v in liters = 0.47/0.210

v in liters =  2.24 liters

1.24 mol ethanol

0.210M = 1.24/ /v in liters

v in liters = 1.24/0.210

v in liters = 5.9L

1.3×10⁻² mol ethanol

0.210M = 1.3×10⁻² /v in liters

v in liters = 1.3×10⁻²/ 0.210m

v in liters = 0.062L or 62ml.

To know more about moles visit:

https://brainly.com/question/29249811

#SPJ4

Answer:

the molecular formula = SF6

Explanation:

firstly we have to list the firmulas we r goin to use to work out the molecular formula.

now we use the 1st formula to find n which will be substituted into the molecular formula

We are going to take the mass we have been given in the question as the mass of the compound and substitute it to the formula.

Then we will work out the mass of empirical formula for the compound: Sulphur; 32 flourine;19 SF6_ 32+6(19)=146

now we finish off n

Lastly we work out the molecula formula

the final answer will therefore be SF6

The maximum amount of NaCl possible would be 5.85 grams.

From the balanced equation of the reaction, the mole ratio of sodium that reacts to sodium chloride that is formed is 1:1. Thus, the first thing would be to convert the mass of the sodium given to its mole equivalent.

Mole = mass/molar mass

Mole of 2.3 g sodium = 2.3/23 = 0.1 mol

Since the mole equivalent of the sodium that reacts is 0.1, the mole equivalent of the sodium chloride that is produced will also be 0.1 since the mole ratio is 1:1.

Thus, the mass of 0.1 mol sodium chloride can be deduced as follows:

Mass = mole x molar mass

Molar mass of NaCl = 23 + 35.5 = 58.5 g/mol

Mass of 0.1 mo of NaCl = 0.1 x 58.5

                                       = 5.85 grams.

In other words, the maximum amount of sodium chloride that can be formed from the reaction of 2.3 g of sodium with excess chrlorine will be 5.85 grams.

More on stoichiometric problems can be found here: https://brainly.com/question/29775083

#SPJ1

Since oxygen consumes more methane than the available, we conclude that methane is the limiting reactant, for which it will be completely consumed, therefore, no remaining methane will be left over.

Insufficient amounts of oxygen, and methane burns to give off carbon dioxide (CO2) and water (H2O). When it undergoes combustion it produces a great amount of heat, which makes it very useful as a fuel source.

Methane forms explosive mixtures with air and the loudest explosions occur when one volume of methane is mixed with 10 volumes of air. Air containing less than 5.5% methane no longer explodes.

To know more about methane, visit here:

https://brainly.com/question/2127750

#SPJ4

The term "partial pressure" refers to the amount of pressure that each gas in a mix exerts. A mole fraction of the a gas,x, can also be used to formulate Dalton's law.

The partial pressure formula: what is it?

Partial pressures can be calculated in one of two ways: 1) To determine the individual pressures of each gas in a mixture, use PV = nRT. 2) Determine the proportion of pressure from of the total pressure that may be assigned to each single gas by using the molar concentration of each gas.

What is the name for partial pressure?

The idea of partial pressure is derived from the fact so each individual gas contributes to the overall pressure in a given proportion, which corresponds to its partial pressure. In order to characterise all the pieces, it is essentially equivalent to taking a percent or proportion of the whole.

To know more about partial pressure visit:

https://brainly.com/question/16749630

#SPJ4

The comparison of the formulas for nitrogen monoxide and nitrogen dioxide is: The formula for nitrogen monoxide (NO) is NO and the formula for nitrogen dioxide (NO2) is NO2.

Nitrogen monoxide (NO) and nitrogen dioxide (NO2) are both compounds made up of nitrogen and oxygen.

The difference between the two lies in the number of oxygen atoms present in each molecule.

NO contains one oxygen atom, while NO2 contains two oxygen atoms. NO is commonly known as nitric oxide and is a colorless and odorless gas that acts as a signaling molecule in the body.

NO2, on the other hand, is a reddish-brown gas that has a sharp, pungent odor and is a toxic air pollutant.

Read more about nitrogen and oxygen here:

https://brainly.com/question/9154002

#SPJ1

As a non-metal, nitrogen will gain one electron. Iodine will gain an electron because it is a non-metal. Since tungsten is a metal, nitrogen normally gains three electrons.

In contrast, nonmetals typically add or share electrons to finish their valence shells. With the exception of hydrogen and helium, all nonmetals have an entirely full valence shell of eight electrons.

Most likely, chlorine will gain an electron. A fully populated shell is a relatively stable arrangement when taking into account the energy states of an atom.

To know more about Nitrogen visit:

https://brainly.com/question/16711904

#SPJ4

1. Identify the phenylthiohydantion: This step involves identifying the amino acid to be degraded using an appropriate reagent that will react with the amino acid to form a new compound called a phenylthiohydantoin.

Phenylthiohydantion (PTH) is a chemical compound that is used as a reactant in organic synthesis.

2. Extract the derivatized amino acid: This involves extracting the phenylthiohydantion from the reaction mixture by using an appropriate solvent.
3. Treat with 6M HCl: This step involves treating the extracted phenylthiohydantion with 6M HCl, which will cleave the peptide bond and produce the free amino acid and a thiohydantoin derivative.
4. Treat with phenyl isothiocyanate: This step involves treating the thiohydantoin derivative with phenyl isothiocyanate, which will form a phenylthiocarbamoyl derivative.
5. Treat with trifluoroacetic acid: This step involves treating the phenylthiocarbamoyl derivative with trifluoroacetic acid, which will hydrolyze the derivative and release the amino acid as a phenylthiohydantoin derivative.
6. Treat with dinitrofluorobenzene: This step involves treating the phenylthiohydantoin derivative with dinitrofluorobenzene, which will further degrade the derivative into its component parts.

To learn more about phenylthiohydantoin
https://brainly.com/question/17562786
#SPJ4

[tex]H_{3} CONa[/tex] and [tex]CH_{2} MgBr[/tex] are electron poor groups. LiCH, COOH, HBr are electron rich groups.

Whereas NeCH group doesn't exist.

Electron-deficient composites are those composites that do not have a sufficient number of electrons to complete the quintet of the central snippet. These composites contain inadequate figures of electrons to form normal electron- brace bonds between each brace of clicked tittles. Electron deficient composites live in polymorphic forms to complete their electron insufficiency.

The type of hydrides that have further electrons than needed for cling is called electron-rich hydrides. The redundant number of electrons is substantially the lone brace of electrons on the central snippet. These types of composites are generally formed by groups of 15, 16, and 17 rudiments.

Learn more about electron poor groups visit:

brainly.com/question/30086470

#SPJ4

There is only one signal despite the substance having the chemical composition C5H10.

C5H10. Also take note of the one degree of unsaturation, which can be interpreted as either an alkene or a cyclic system. Since an alkene would provide at least two distinct signals (protons on carbons implicated in the alkene bond and protons on carbons close to it), this chemical must be cyclic. Each proton (and hence each carbon) must be the same because there is only one signal. Thirteen hydrocarbon isomers' chemical formula is C5H10 (represented by their CAS numbers on the chart). Cycloalkanes and alkenes can be made from them.

With these restrictions, only one structure is viable.

For more information on NMR spectra kindly visit to

https://brainly.com/question/14868725

#SPJ4

O2 has a -498 kJ/mol bond energy.

Measure of Bond Energy

The symbol for it is typically H. Bond energy is measured in kcal/mol, often known as kJ/mol, or kilojoule/mol. It should be noticed that the bond energy is consistently positive. The favourable indication results from the energy being supplied to disrupt the chemical bonds.

Bond enthalpy, often referred to as bond-dissociation enthalpy, average bond energy, or bond strength, is a term used to indicate how much energy is held in a bond between atoms in a molecule. In particular, it refers to the additional energy required for the homolytic or symmetrical cleavage of a bond in the gas phase.

To know more about bond energy visit:

https://brainly.com/question/26141360

#SPJ4

The nuclear fission of U-235 is a process of radioactive decay in which the heavy nucleus of Uranium-235 which absorbs a neutron first and then it ultimately converts into a an unstable nucleus of Uranium-236 which eventually bifurcates into the lighter elements and additional neutrons.

One of the fissile isotopes that undergo an important and crucial nuclear fission reactions is U-235 which in turn forms a chain reaction. A nuclear fission can be defined as a process of radioactive decay where a heavier nucleus splits further into the two or more lighter elements by absorbing a neutron and releasing its multiples along with great amount of energy.

Taking up the example of Uranium-235, when it's bombarded with small neutrons, the nucleus of U-235 absorbs one of them and turns to heavier U-236 which remains unstable for an infinitesimal time. This U-236, undergoes a phase where fission occurs and it releases three neutrons and produce Kr-92 and Ba-141 along with enormous amount of energy and gamma rays.

Learn more about nuclear fission:

brainly.com/question/913303

#SPJ4

Boiling Points - Fractional distillation uses temperature to separate substances. It works by heating a mixture until its components vaporize.

Fractional distillation is a process used to separate mixtures of liquids that have different boiling points. It is an essential technique used in chemical laboratories and the petroleum and petrochemical industries. This process involves heating a mixture of liquids to its boiling point, then cooling and condensing the vapors, and collecting the resulting fractions of the mixture.

The vapors are then passed through fractionating columns which have different boiling points, allowing the substances to separate. The vapors that have the lowest boiling points are collected first, followed by the ones with higher boiling points.

To learn more about Fractional distillation
https://brainly.com/question/790490
#SPJ4

State not play an important a significant role in the extent of harm upon exposure to a chemical.

What is meant by chemical?

To learn more about chemical refer to

https://brainly.com/question/1222323

#SPJ4

The molality of the NH3 solution is: 2.34 moles NH3/0.0712 kg = 33.0 m.

Molality is a concentration unit that is most often used in chemistry to express the concentration of solutions. It is defined as the number of moles of solute dissolved in one kilogram of a solvent. It is represented by the symbol m and is expressed in units of moles per kilogram (mol/kg). Molality is a temperature-independent concentration unit and it is often used to calculate freezing point depression, boiling point elevation, and osmotic pressure. It is also useful in determining the activity coefficient of solutions which is important in determining the strength of chemical interactions.

The molarity of an NH3 solution is calculated by dividing the concentration of the solute (in moles) by the volume of the solution (in liters).
Molarity = moles of solute/liters of solution
The moles of NH3 can be calculated by using the molar mass of NH3:
moles of NH3 = 40.0 g NH3/17.03 g/mol NH3 = 2.34 moles NH3
The volume of the solution can be calculated by using the density of the solution:
volume of solution = 70.0 g water/0.982 g/ml = 71.2 ml
Therefore, the molarity of the NH3 solution is:
Molarity = 2.34 moles NH3/0.0712 L = 33 mol/L
The molality of an NH3 solution is calculated by dividing the concentration of the solute (in moles) by the mass of the solvent (in kilograms).
Molality = moles of solute/kilograms of solvent
The moles of NH3 can be calculated by using the molar mass of NH3:
moles of NH3 = 40.0 g NH3/17.03 g/mol NH3 = 2.34 moles NH3
The mass of the solvent can be calculated by using the density of the solution:
mass of solvent = 70.0 g water/0.982 g/ml = 71.2 g
Therefore, the molality of the NH3 solution is:
Molality = 2.34 moles NH3/0.0712 kg = 33.0 m

To learn more about molality
https://brainly.com/question/1370684
#SPJ4

The indicator is generally added to the titrant in a titration. The primary standard used in this experiment is potassium dichromate (K2Cr2O7).

Indicators are generally added to the titrant, not the analyte, in a titration. The primary standard used in this experiment is potassium permanganate (KMnO₄).

The indicator is generally added to the titrant in a titration in order to indicate the endpoint of the titration. The primary standard used in this experiment is potassium dichromate (K2Cr2O7), which is a substance that is used to calibrate the Volhard method.

For more questions like Titration click the link below:

https://brainly.com/question/2728613

#SPJ4

170 mg of Pb is equal to 0.17 g of Pb. Since the density of water is 1.0 g/ml, that would be the same as 0.17 ml of water. So, the answer is 0.17 ml of water contains 170 mg of Pb.

The density of a substance (volumetric relative density but rather specific mass) is its mass per unit volume. The most common symbol for density is (the lower case Greek letter rho), but the Latin letter D is also an option. It is sometimes modified by the dimensionless value "relative density" as well as "specific gravity," i.e. the ratio of the denseness of the material compared to a standard material, usually water, to simplify density comparisons across different systems of units. As a result, a relative density below one in relation to water indicates that the substance hovers in water.

To learn more about density
https://brainly.com/question/28348989
#SPJ4

If the pressure of the each gas is increased at a constant temperature until condensation occurs, Then a) octane will condense at the lowest pressure.

Condensation is the process by which water vapor in the air is converted to liquid water. It is the opposite of evaporation. Condensation is essential for the water cycle as it causes the formation of clouds. Condensation is the process by which the physical state of matter changes from the gas phase to the liquid phase. For example, condensation occurs when water vapor (a gas) in the air contacts a cooler surface and turns into liquid water. Octane is a gasoline additive that modern engines need to function properly. Sources of octane have taken many forms over the years. Ocatne will condense at the lowest pressure.

Learn more about the condensation in

https://brainly.com/question/1447093

#SPJ4

According to Le Chatelier's principle, if a cation forms an insoluble precipitate with [AgCl], the direction that is favored when added to the system is for the precipitate to form.

When a cation is added to a solution containing Ag+ ions and Cl- ions, it can form an insoluble precipitate with AgCl if it is one of the cations that are capable of doing so. This will cause AgCl to come out of the solution and form a solid precipitate.

This reaction is exothermic, releasing heat, and the formation of the precipitate will consume Ag+ and Cl- ions, which will decrease the concentration of the ions in the solution.

By consuming the reactants, the formation of the precipitate will cause the reaction to shift to the right, in the direction of the formation of the precipitate. This is in agreement with Le Chatelier's principle which states that a system at equilibrium will shift to counteract the changes imposed on it.

To know more about  Le chatelier's principle:

https://brainly.in/question/1114178

#SPJ4

Encryption at rest using AES-256

Automatic key rotation every 90 days

Compliance with SOC 2, SOC 3, PCI DSS, and HIPAA standards

Azure Disk Encryption is a good solution to encrypt data at rest using AES-256 and automatic key rotation every 90 days. Azure also has certifications for SOC 2, SOC 3, PCI DSS, and HIPAA, so using Azure services can help you meet those compliance standards. Another solution to consider is Azure Key Vault, which allows you to manage and rotate encryption keys for data at rest, and can also help with compliance requirements.

The equilibrium constant for reaction A is 4.84×1012, B is 3.35×1034, and C is 4.5510^-7.

A. The equilibrium constant for the reaction 4COF2(g)⇌2CO2(g)+2CF4(g) is Kp = (Kp for 2COF2(g)⇌CO2(g)+CF4(g))^2 = (2.2×106)^2 = 4.84×1012

B. The equilibrium constant for the reaction 23COF2(g)⇌13CO2(g)+13CF4(g) is Kp = (Kp for 2COF2(g)⇌CO2(g)+CF4(g))^(23/2) = (2.2×106)^(23/2) = 3.35×1034

C. The equilibrium constant for the reaction CO2(g)+CF4(g)⇌2COF2(g) is Kp = 1/(Kp for 2COF2(g)⇌CO2(g)+CF4(g)) = 1/(2.210^6) = 4.5510^-7

D. In the first reaction 4COF2(g)⇌2CO2(g)+2CF4(g) products will be favored at equilibrium because Kp > 1. In the second reaction 23COF2(g)⇌13CO2(g)+13CF4(g) products will be favored at equilibrium because Kp > 1. In the third reaction CO2(g)+CF4(g)⇌2COF2(g) reactants will be favored at equilibrium because Kp < 1

Learn more about equilibrium constant here:

https://brainly.com/question/15118952

#SPJ4

The periodic table has a variety of different elements. Some substances are radioactive, a few are dangerous, and a few are noble gases. Therefore, within a period, the atomic radius reduces from left to right.

The term "periodic table" refers to a table where elements having characteristics such as metals, non-metals, metalloids, and radioactive elements are arranged in atomic number order.

The elements belonging to period 2 are Lithium, Beryllium, Boron, Carbon, Nitrogen, Oxygen, Fluorine and neon. Within a period, the atomic radius reduces from left to right.

Therefore, within a period, the atomic radius reduces from left to right.

Learn more about periodic table, here:

https://brainly.com/question/11155928

#SPJ1

An identical cylinder containing hydrogen at the same pressure as a cylinder containing oxygen will contain more hydrogen molecules because hydrogen gas (H2) has a lower molar mass than oxygen gas (O2). This means that there are more H2 molecules in a given volume at a given pressure, as compared to O2.

Because hydrogen gas (H2) has a smaller molar mass than oxygen gas, an identical cylinder holding hydrogen at the same pressure will hold more hydrogen molecules (O2). This indicates that compared to O2, there are more H2 molecules in a given volume at a given pressure.

Learn more about identical cylinder here:

https://brainly.com/question/28474923

#SPJ4

Excited electrons that revert to the ground state result in atomic emission spectra.

To know more about atomic emission spectra visit

https://brainly.com/question/14231399

#SPJ4