Describe some common chemical properties of matter?

Three 1.0 liter flasks were filled with H2, O2 and Ne, respectively, at STP, the statement true is Each flask has the same number of gas molecules.

STP, or standard temperature and pressure, refers to the nominal atmospheric conditions at sea level. The temperatures and pressures are 0 degrees Celsius and 1 atmosphere, respectively. In addition to other professionals, the STP value is crucial for physicists, chemists, engineers, pilots, and navigators.

STP is frequently used to set standard temperature and pressure conditions, which is crucial for measurements and recording of physical and chemical processes.

It's inversely as important to indicate the applicable reference conditions of temperature and pressure when stating the molar volume of a gas( 41) as it's when expressing a gas volume or volumetric inflow rate. Stating the molar volume of a gas without indicating the reference conditions of temperature and pressure has veritably little meaning and can beget confusion.

Learn more about STP :

https://brainly.com/question/27100414

#SPJ4

Answer: B

Explanation: The number of waves passing through a point in one second is called frequency.

Answer:

During high-intensity interval training, a pH decrease may affect how well glycogen is used. Acidosis, often known as a drop in pH, is a condition that develops when lactic acid builds up in the muscles. The glycogen phosphorylase enzyme, which converts glycogen to glucose, may become inhibited as a result of this acidosis. As a result, glycogen is used less frequently as a source of energy. As a result of this decline in glycogen usage, tiredness and poor performance during intense activity may result. However, the impact of acidosis on glycogen use is poorly understood, and more investigation is needed to identify the underlying mechanism.

Explanation:

Answer:

During high-intensity interval exercise, a drop in pH can affect glycogen utilization in several ways. A decrease in pH, also known as acidosis, can lead to a decrease in the activity of enzymes involved in glycogen metabolism. For example, glycolytic enzymes, which break down glycogen into glucose and other metabolites, are sensitive to changes in pH and their activity may be decreased in acidic conditions.

In addition, acidosis can also reduce the availability of glycogen in muscle cells, as it can cause the breakdown of glycogen into lactate, which can interfere with the normal functioning of the muscle. This, in turn, can lead to decreased energy production and a reduction in the ability of the muscles to perform high-intensity activities.

Explanation:

Therefore, a drop in pH during high-intensity interval exercise can have a negative impact on glycogen utilization, leading to decreased energy production and reduced athletic performance.

Increased gas solubility Reduced gas solubility As a body of water's temperature rises, Oz's gas solubility remains unchanged. Air enters the blood when the diver drops 10 meters; an atm of pressure rises.

Gas molecules can more easily leave the solution phase at higher temperatures due to their higher kinetic energy. As a result, solubility declines. A measurement of the concentration of dissolved gas particles in a liquid, solubility is a function of gas pressure. A gas's solubility rises as pressure is increased, but it falls as pressure is decreased due to an increase in collision frequency. The solubility of gases rises with pressure, as one might anticipate. According to Henry's Law, a gas's solubility in a liquid is directly inversely proportionate to the gas's pressure above the surface of the solution. thus this will most effectively release the pressure that has been imposed.

Learn more about frequency here:

https://brainly.com/question/4393505

#SPJ4

To determine when the cells are in an isotonic solution, the additional investigation that can be used is option B. Decreasing the salinity of the environment a little at a time until ATP usage reaches a minimum.

An isotonic solution is one where the solute concentration outside the cell is the same as the solute concentration inside the cell. In this state, there is no net movement of water into or out of the cell, and the contractile vacuole does not need to pump out excess water. As the salinity of the environment is decreased, the solute concentration outside the cell will decrease, and water will enter the cell, leading to an increase in the workload of the contractile vacuole. However, when the salinity of the environment is decreased to the point where it becomes isotonic with the cytosol of the cell, the workload of the contractile vacuole will reach a minimum, as there is no more excess water to be pumped out.

Therefore, by decreasing the salinity of the environment a little at a time until the ATP usage reaches a minimum, the experimenter can determine when the cells are in an isotonic solution.

Learn more about cytosol here;

https://brainly.com/question/23987687

#SPJ4

Answer:

50 moles of oxygen

Explanation:

The reaction between octane (C8H18) and oxygen (O2) can be represented by the following equation:

C8H18 + 12.5O2 -> 8CO2 + 9H2O

So, to react fully with 4 mol of octane, we need 4 mol * 12.5 mol O2/1 mol C8H18 = 50 moles of oxygen.


ALLEN

some medicines contain legal ingredients like starch and sugar, and forensic scientists must be able to distinguish between the two. Because courts rely on the data forensic scientists find in their research, it is crucial for them to be able to recognise specific substances.

The ideal technique for this evaluation is Gas Chromatography/Mass Spectrometry (GC/MS), which is frequently used in forensic laboratories. The method offers a quick, semi-automated analysis of the material and often produces enough data to pinpoint the problematic substances. To ascertain whether an unlawful substance is present in the supplied material is the aim of forensic drug chemistry. Law enforcement can seek criminal charges based on the study' findings, and the court can decide on the right sentence.

To know more about forensic drugs visit:

https://brainly.com/question/1347938

#SPJ1

Answer:40 days

- K = [ ln ( 1/2 ) ] / [ t 1/2 ]

- K = [ln ( 1/2 ) ] / 8 = - 0.08664 ( days )^-1

ln C/ C0 = ( - K ) ( t )

C=1mg and C0= 32mg

t = [ ln (1/32 )] / [ - 0.08664 ] = 40 days

Yellow is the correct answer .

Chlorophyll is a green pigment that is essential for the process of photosynthesis in plants, algae, and some bacteria. It absorbs light energy from the sun and converts it into chemical energy, which is then used to produce organic compounds that the organism can use for energy and growth. Chlorophyll is found in specialized organelles called chloroplasts, which are present in the cells of photosynthetic organisms. There are several types of chlorophyll, but the most common types found in plants are chlorophyll a and chlorophyll b. Chlorophyll is also responsible for the green color of leaves and other photosynthetic tissues.

To learn more about the Chlorophyll , click the given below ;

https://brainly.com/question/13500580

#SPJ1

Answer:

C. Hl

Explanation:

I just looked it up on the internet lol

Density and mass concentration have the same numerical value for a pure substance. Density can be important to packaging, purity, and buoyancy because different materials typically have varied densities.

What is density?

At normal temperatures and pressures, osmium and iridium are the densest elements that are currently known.

The dimensionless number "relative density" or "specific gravity," which is the ratio of the material's density to that of a standard material, typically water, is occasionally used to substitute density in order to make density comparisons across different systems of units simpler.

As a result, if a substance has a relative density lower than one in comparison to water, it floats.

We know that

Density = mass / volume  

And volume = L*W*H (thickness)

First calculate the volume of foil as follows:

Density = mass / volume

Volume = mass / density  

= 2.722 g/ 7.26 g/ cm^3

= 0.375 cm^3

And volume = = L*W*H (thickness)

0.375 cm^3 = 5cm*5 cm * thickness

Thickness = 0.015 cm

To know more about density, click the link given below:

brainly.com/question/29775886

#SPJ1

Answer:

D: X: Be3+, Y: 91.6nm.

Explanation:

The energy required to photoionize an ion from its excited state depends on the electron configuration and energy levels of the ion. Option D corresponds to the ionization energy for Be3+ from its 3rd excited state, which is known to be 91.6 nm. Options A and C correspond to incorrect ionization energies for Li2+ and cannot be the correct answer.

ALLEN

The units which are used to represent the volume are mL, L, cm³, m³, etc. The volume of air in liters that you might inhale (and exhale) in 24.0 hours is 10,684.8 L.

The measure of the capacity that an object holds is generally defined as the volume. For example if a beaker can hold 100 mL of water, then its volume is said to be 100mL.

Here in minute, volume is:

15 × 0.495 = 7.42 L

In an hour, volume is:

7.42 × 60 = 445.2

In 24 hours, the volume will be:

Volume = 445.2 × 24 = 10,684.8 L

Thus the volume of air in 24 hours is 10,684.8 L.

To know more about volume, visit;

https://brainly.com/question/13935918

#SPJ1

Answer:

5 g/cm³

Explanation:

When we divide the mass of a substance (124.7 g) by its volume (25 cm³), we are finding its density. Density is defined as the mass per unit volume of a substance and has the unit g/cm³. In this case, dividing 124.7 g by 25 cm³ gives us 4.988 g/cm³.

However, in order to simplify the answer, it is common practice to round off the density value to the nearest whole number. In this case, 4.988 g/cm³ can be rounded off to 5 g/cm³. So, the final answer is 5 g/cm³.


ALLEN

Answer: 204.8256 millimeters

Explanation:

The formula of the original hydrate is CuSO4 · 5H2O, and its name is copper (II) sulfate pentahydrate.

First we need to use the mass information provided in the problem and the molar masses of the relevant compounds.

First, we can calculate the mass of water that was present in the original hydrate:

Mass of water = Mass of hydrate - Mass of anhydrous salt

Mass of water = 2.50 g - 1.59 g

Mass of water = 0.91 g

Next, we can calculate the number of moles of anhydrous copper (II) sulfate that remained after heating:

Number of moles of anhydrous salt = Mass of anhydrous salt / Molar mass of anhydrous salt

Molar mass of anhydrous copper (II) sulfate = (1 x 63.55 g/mol) + (1 x 32.06 g/mol) + (4 x 16.00 g/mol) = 159.61 g/mol

Number of moles of anhydrous salt = 1.59 g / 159.61 g/mol

Number of moles of anhydrous salt = 0.00997 mol

We can then calculate the number of moles of copper (II) sulfate that were present in the original hydrate:

Number of moles of copper (II) sulfate = Number of moles of anhydrous salt

Number of moles of copper (II) sulfate = 0.00997 mol

Finally, we can use the mass of copper (II) sulfate and the number of moles of copper (II) sulfate to determine the formula and name of the original hydrate. The formula of the hydrate will be in the form of CuSO4 · xH2O, where x is the number of water molecules per formula unit.

The molar mass of CuSO4 is (1 x 63.55 g/mol) + (1 x 32.06 g/mol) + (4 x 16.00 g/mol) = 159.61 g/mol.

The mass of CuSO4 in the original hydrate is 2.50 g - 0.91 g = 1.59 g.

The number of moles of CuSO4 in the original hydrate is therefore 1.59 g / 159.61 g/mol = 0.00997 mol.

The ratio of moles of water to moles of CuSO4 in the original hydrate is:

x = (moles of water) / (moles of CuSO4)

x = (0.91 g / 18.02 g/mol) / 0.00997 mol

x = 5.06

Therefore, the formula of the original hydrate is CuSO4 · 5H2O, and its name is copper (II) sulfate pentahydrate.

Learn more about original hydrate here : brainly.com/question/16275027

#SPJ1

Water is the best insulator because it has the greatest specific heat capacity and all other substances have low specific heat than the water.

The term specific heat capacity is defined as the amount of heat in joules required to increase the temperature of one gram of a substance by one degree Celsius.

An insulator is a substance which conducts heat to a very miserable extent.

From the definition of specific heat capacity and insulator, we conclude that the higher the value of specific heat capacity, the harder it would be to heat up the material, that is, the more heat would be needed.

All the given substances, only water has the greatest specific heat capacity, therefore, it's the best insulator.

Gold is the best conductor, as it has the lowest specific heat capacity.

Thus, the best insulator is water.

To learn more about the specific heat capacity, follow the link;

https://brainly.com/question/29766819

#SPJ9

Your question is incomplete, most probably your question was

Table C: Known Specific Heat Values for Common

Materials

Material Specific Heat (J/g*C)

Water 4.18

Concrete 0.88

Wood 1.80

Aluminum 0.90

Glass 0.84

Sand 0.83

Steel 0.49

Iron 0.44

Copper 0.38

Lead 0.16

Gold 0.13

What is the best insulator and why?

By dissolving the solute in the solvent while adding heat, a supersaturated solution can be created. At room temperature, a supersaturated solution contains more solute.

than can normally be dissolved in the solvent. This is accomplished by dissolving the solute in a hot solvent and then progressively chilling the solution to allow the excess solute to stay dissolved, resulting in a supersaturated solution. A solution can stay supersaturated until a seed crystal is begun, which is usually accomplished by adding solid to the solution or allowing the solvent to evaporate. The seed crystal acts as a surface for surplus solute to crystallize and exit solution. The surplus solute quickly crystallizes out of solution once a seed crystal is introduced, resulting in a saturated solution.

learn more about temperature   here:

https://brainly.com/question/11464844

#SPJ4

This equation describes how hydrogen iodide breaks down. At 700 degrees Celsius, the reaction's second order constant is 1.6 x 10-3 L mol-1 s-1. if the first

How does hydrogen fuel work?

Energy created from other sources can be transported, transported, and stored using hydrogen. Many processes can be used today to manufacture hydrogen fuel. Nowadays, electrolysis and natural gas reforming, a thermal process, are the two most used techniques. Solar-powered and biological processes are some additional techniques.

What is an atom of hydrogen?

An atom of the element hydrogen is known as a hydrogen atom. A single positively charged neutron and a single negative charge electron are present in the electrically neutral atom, and they are both held to the nucleus by the Electrical charges. Around 75% of the universe's total baryonic mass is made up of atomic hydrogen.

To know more about hydrogen visit:

https://brainly.com/question/28937951

#SPJ1

Answer:

Given that an atom has 15 electrons, here's the solution to each part of the problem:

i. Number of subshells:

The number of subshells can be determined by the electron configuration of the atom. The electron configuration of a neutral atom with 15 electrons is 1s2, 2s2, 2p6, 3s2. Thus, there are 4 subshells: 1s, 2s, 2p, and 3s.

ii. Number of orbitals:

The number of orbitals in each subshell can be determined by the value of the principal quantum number (n) and the angular momentum quantum number (l). The number of orbitals in a subshell is equal to 2l + 1.

For the subshell 1s, l = 0, so there is 1 orbital (2 * 0 + 1 = 1).

For the subshell 2s, l = 0, so there is 1 orbital (2 * 0 + 1 = 1).

For the subshell 2p, l = 1, so there are 3 orbitals (2 * 1 + 1 = 3).

For the subshell 3s, l = 0, so there is 1 orbital (2 * 0 + 1 = 1).

So in total, there are 6 orbitals: 1 for 1s, 1 for 2s, 3 for 2p, and 1 for 3s.

iii. Number of electrons having azimuthal quantum number = 1:

The azimuthal quantum number (m_l) represents the orientation of the orbital in space. The value of m_l can range from -l to +l in integer steps. For p orbitals, l = 1, so the possible values of m_l are -1, 0, and 1.

In this case, we're looking for the number of electrons with m_l = 1. In a full p orbital, there are 2 electrons with m_l = -1, 2 electrons with m_l = 0, and 2 electrons with m_l = 1.

Given that the atom has 15 electrons, it means that 2 of the electrons in the 2p subshell are unpaired (since there are an odd number of electrons). So in this case, there is 1 electron with m_l = 1.

The arrow shows that the bond between the chlorine atom and the fluorine atom is polar covalent. The electrons in the bond are pulled closer to the fluorine atom, and the chlorine atom is slightly negative.

A polar covalent bond is a type of chemical bond that occurs when two atoms share electrons unequally. In a polar covalent bond, the electrons are attracted more strongly to one of the atoms than the other, leading to a separation of electric charge.

The electrons in the bond are pulled closer to the fluorine atom, making it slightly negative, and the chlorine atom becomes slightly positive. This is because fluorine is more electronegative than chlorine, meaning that it has a greater attraction for the shared electrons in the bond.

Learn more on polar covalent atom here: https://brainly.com/question/14051272

#SPJ1

Answer:

63.6%

Explanation:

To calculate the percent yield of CH3OH, we need to compare the actual yield to the theoretical yield, which is the maximum amount of CH3OH that can be produced based on the amount of CO and H2 that was used in the reaction.

The theoretical yield can be calculated using the balanced chemical equation for the reaction:

CO(g) + 2H2(g) -> CH3OH(l)

Since 1 mole of CO reacts with 2 moles of H2 to produce 1 mole of CH3OH, the moles of CH3OH produced can be calculated by dividing the mass of CO by its molar mass and then multiplying by the ratio of CH3OH to CO in the balanced equation (1 mole of CH3OH per 1 mole of CO).

Let's assume the moles of CO used in the reaction is n. Then,

n = 85 g CO / 28.01 g/mol = 3.03 moles

And the theoretical yield of CH3OH would be:

3.03 moles CO * (1 mole CH3OH/1 mole CO) = 3.03 moles CH3OH

The moles of CH3OH can then be converted to grams:

3.03 moles CH3OH * 32.04 g/mol = 97.36 g CH3OH

Finally, the percent yield can be calculated by dividing the actual yield of CH3OH (61.8 g) by the theoretical yield (97.36 g) and multiplying by 100%.

Percent yield = (Actual yield / Theoretical yield) * 100%

= (61.8 g CH3OH / 97.36 g CH3OH) * 100%

= 63.6%

So the percent yield of CH3OH is 63.6%.

tell me if you confus

ALLEN

Answer: 30.3 g

I had this question..If i hadn't done this I'd be confused.

Answer:

The balanced chemical equation for this reaction is:

2 Cu + Ag(NO3)2 -> 2 Cu(NO3)2 + Ag

The limiting reactant is the reactant that runs out first and determines the amount of product that can be produced. To determine the limiting reactant, we need to calculate the number of moles of each reactant.

From the given mass of copper, we can calculate the number of moles as follows:

2.5 g Cu / 63.55 g/mol = 0.0395 mol Cu

From the given mass of silver nitrate, we can calculate the number of moles as follows:

5 g AgNO3 / 169.87 g/mol = 0.0295 mol AgNO3

Since 0.0295 mol of AgNO3 is less than 0.0395 mol of Cu, AgNO3 is the limiting reactant.

To calculate the amount of each product produced, we can use the stoichiometry of the balanced equation.

For Ag, the reaction produces 1 mole of Ag for every 2 moles of AgNO3, so we have:

0.0295 mol AgNO3 * 1 mole Ag / 2 moles AgNO3 = 0.0148 mol Ag

And converting moles to grams:

0.0148 mol Ag * 107.87 g/mol = 1.59 g Ag

For Cu(NO3)2, the reaction produces 2 moles of Cu(NO3)2 for every 2 moles of AgNO3, so we have:

0.0295 mol AgNO3 * 2 moles Cu(NO3)2 / 2 moles AgNO3 = 0.0295 mol Cu(NO3)2

And converting moles to grams:

0.0295 mol Cu(NO3)2 * 164.46 g/mol = 4.86 g Cu(NO3)2

Therefore, the limiting reactant is AgNO3 (Cu/AgNO3) and the reaction produces 1.59 g of Ag and 4.86 g of Cu(NO3)2.

According to the concept of half-lives, atoms remaining after 2,4,6,8,10 years are 500,250,125,62.5,31.25 atoms respectively.

Half -life of a substance is defined as the time which is required for half of the quantity of a radioactive substance to get decayed.It is a term which is used in nuclear chemistry for describing how quickly unstable atoms undergo radioactive decay into other nuclear species by emitting particles or the time which is required for number of disintegrations per second of radioactive material to decrease by one half of its initial value.

After 2 years ;1000/2=500 atoms

After 4 years ;500/2=250 atoms

After 6 years ;250/2=125 atoms

After 8 years;125/2=62.5 atoms

After 10 years ;62.5/2=31.25 atoms

Learn more about half life,here:

https://brainly.com/question/24710827

#SPJ9

The R or S designation is assigned to each stereogenic center based on the priority of the substituents attached to that carbon atom.

Enantiomers are pairs of molecules that are non-superimposable mirror images of each other. Enantiomers have the same chemical and physical properties, except for their interaction with polarized light. Enantiomers have opposite configurations at every stereogenic center, so they have opposite R or S designations.

Diastereomers, on the other hand, are stereoisomers that are not mirror images of each other. Diastereomers have different physical and chemical properties, and they have different configurations at one or more stereogenic centers. Unlike enantiomers, diastereomers do not have opposite R or S designations.

To identify stereogenic centers in a molecule, one needs to determine the number of different substituents attached to a carbon atom. The R or S designation is assigned to each stereogenic center based on the priority of the substituents attached to that carbon atom.

Learn more about Enantiomers :

https://brainly.com/question/21506956

#SPJ4

Answer: c – Reactant 1

Explanation:

Since HNO3, (Nitric Acid), is an acid, that leaves Mg(OH)2 to be the Base in the reaction.

Hence the answer is Reactant 1

Answer:

it's c

Explanation:

maybe...I don't know how I works it out but it is c

The number of moles of 5.96  g of zinc acetate is 00324 . The volume of the solution is 0.25 L. Then the molarity of the solution is  0.16 M.

Molarity of a solution is a common term used to express the concentration of a solution. It is the the ratio of number of moles of the solute to the volume of solution in liters.

Given that the solution contains 5.965 g of ammonia.

molar mass of zinc acetate = 183.4 g/mol.

no.of moles in 75 g = 75/17 = 4.411 moles.

volume of solution = 250 ml = 0.25 L.

molarity = no.of moles of solute/volume of solution in L.

= 0.032 mole/ 0.25 L= 0.16 M.

Therefore, the molarity of the solution is  0.16  M.

Find more on molarity :

brainly.com/question/2817451

#SPJ1

The type of reaction shown is a double displacement reaction.

The given chemical equation represents a chemical reaction known as a double displacement or metathesis reaction.

In this type of reaction, the cations and anions of two different compounds switch places, resulting in the formation of two new compounds.

In the given equation, Compound A and Compound B react to form Compound C and Compound D by exchanging their respective cations and anions.

More on double replacement reactions can be found here: https://brainly.com/question/29224660

#SPJ1