Determine if the sequence below is arithmetic or geometric and determine the
common difference / ratio in simplest form.
19, 14, 9, ...

Answers

Answer 1

We represent it as -5. Thus, the common difference/ratio of the given sequence in the simplest form is -5.

To determine if a sequence is arithmetic or geometric, we have to find the differences (common differences) between the terms in the sequence.

The differences between the terms are calculated to determine if they are consistent for the arithmetic sequence or if they have a common ratio for the geometric sequence.

Therefore, the sequence below is arithmetic:19, 14, 9, ...To determine the common difference, we subtract each term from the previous term.19 – 14 = 5; 14 – 9 = 5Therefore, the common difference is 5. Hence, this is an arithmetic sequence with a common difference of 5.

Also, we can say that 14 - 19 = -5, 9 - 14 = -5, and so on. This is a common difference of 5 in the opposite direction. We can say that the difference is -5.

For more such questions on sequence

https://brainly.com/question/7882626

#SPJ8


Related Questions

A recycling bin is in the shape of a rectangular box. Find the height of the box if its length is 16 ​ft, its width is ​9 ft, and its surface area is 638ft^2 ​(In the​ figure h=height, Assume that the given surface area includes that of the top lid of the​ box.)

Answers

The height of the rectangular recycling bin is 7 ft.

How to calculate the height of the box

To find the height of the rectangular recycling bin, we can use the formula for the surface area of a rectangular box:

Surface Area = 2lw + 2lh + 2wh

Given:

Length (l) = 16 ft

Width (w) = 9 ft

Surface Area = 638 ft²

Substituting these values into the surface area formula, we have:

638 = 2(16)(9) + 2(16)h + 2(9)h

638 = 288 + 32h + 18h

638 = 288 + 50h

350 = 50h

h = 350 / 50

h = 7

Therefore, the height of the rectangular recycling bin is 7 ft.

Learn more about height at https://brainly.com/question/73194

#SPJ1

please, answer! 50 pts!

Answers

Answer:

Slope = 4

y-intercept = -1

Step-by-step explanation:

Slope-intercept form is one of the most common ways to write a linear equation when graphing.

Slope-intercept Form

Slope-intercept form is written as y = mx + b. In this equation, m is the slope. Slope represents the rate of change of the equation. The slope can also be described as the change in y over the change in x.

Additionally, the b represents the y-intercept. The y-intercept is the y-value where the graph intersects with the y-axis.

Finding Slope and Y-intercept

The equation we are given is y = 4x - 1. This means that the slope is 4. So, the rate of change for the equation is 4 units up per 1 unit right. Additionally, the y-intercept is -1. This means that the function will intersect the y-axis when y = -1. Using this information, we could graph the function if we wanted.

X intercept (1/4 0)
Y intercept (0,-1)

Help me plssssssssssssssss

Answers

Answer:

a) 13

b) B

Step-by-step explanation:

y = x² - 3, where x= 4

• y= 4²-3

•y = 16-3

•y = 13.

(Hope I answered your question)

) You are the manager of a firm that produces output in two plants. The demand for your firm's product is P = 78 − 15Q, where Q = Q1 + Q2. The marginal costs associated with producing in the two plants are MC1 = 3Q1 and MC2 = 2Q2. What price should be charged to maximize profits? 2) _______ A) $80.5 B) $40.5 C) $60.5 D) $20.5

Answers

The price that should be charged to maximize profits:  $80.5 (option a).

To determine the price that should be charged to maximize profits, we need to find the quantity that maximizes the firm's profit function. The profit function can be calculated by subtracting the total costs from the total revenue.

First, let's find the total revenue function. The demand equation given is P = 78 − 15Q, where Q = Q1 + Q2. We can rearrange this equation to express Q in terms of P: Q = (78 - P) / 15.

The total revenue function is calculated by multiplying the price (P) by the quantity (Q): TR = P * Q. Substituting Q, we get TR = P * [(78 - P) / 15].

Next, we need to find the total cost function. The marginal costs associated with producing in the two plants are MC1 = 3Q1 and MC2 = 2Q2. The total cost is the sum of the costs in both plants: TC = MC1 + MC2. Substituting the respective marginal cost equations, we get TC = 3Q1 + 2Q2.

Finally, we can calculate the profit function by subtracting the total cost from the total revenue: Profit = TR - TC.

Now, to find the price that maximizes profits, we need to differentiate the profit function with respect to price (P) and set it equal to zero. By solving this equation, we can find the value of P that maximizes profits.

Taking the derivative of the profit function with respect to P and setting it equal to zero, we get d(Profit)/dP = 0. Solving this equation will give us the value of P that maximizes profits.

After solving the equation, we find that P = $80.5 maximizes profits. Therefore, the price that should be charged to maximize profits is A) $80.5.

For more such questions on profits, click on:

https://brainly.com/question/26483369

#SPJ8

which of the following situations has a straight line and passes through the origin? • Kevin gets $2 for each point he scores in a basketball match. • The area of district and its population. • The cost of a pie is $3.50 and the base charge is $2. • All of the choices.

Answers

The situation that has a straight line and passes through the origin is when "All of the choices" are true.

A straight line equation in slope-intercept form is given by; y = mx + b, where m is the slope and b is the y-intercept.However, when the straight line passes through the origin, then the value of b becomes zero, which means the equation becomes; y = mx.

Therefore, among the given situations, the one that has a straight line and passes through the origin is "All of the choices."

Since all the given situations have a proportional relationship, which means as one variable increases, the other variable increases, then they all form a straight line that passes through the origin.

Therefore, all the given situations have a straight line and passes through the origin.

For more question on origin

https://brainly.com/question/12282253

#SPJ8

Select the correct answer.
A department store's customer parking lot has 4 rows with an equal number of parking spots in each row. The lot also has 15 parking spots for store
employees. If c cars can be parked in each of the 4 main rows of the parking lot, what is the expression for the maximum number of cars that can be
parked in the parking lot?
O A. 150-4
OB. 15-4)
OC. 40+15
OD.
4(0+15)

Answers

The correct expression for the maximum number of cars that can be parked in the parking lot is 4c + 15. Option C

Given that there are 4 main rows with an equal number of parking spots in each row, and each row can accommodate c cars, the total number of parking spots in the main rows is 4c.

Additionally, there are 15 parking spots specifically allocated for store employees.

To find the maximum number of cars that can be parked in the parking lot, we need to add the number of parking spots in the main rows and the number of parking spots for employees.

Expression:

Total number of cars = Number of cars in main rows + Number of cars in employee spots

Number of cars in main rows = 4c

Number of cars in employee spots = 15

Therefore, the maximum number of cars that can be parked in the parking lot is:

Total number of cars = 4c + 15

This expression represents the sum of cars parked in the main rows and the cars parked in the employee spots, giving us the maximum capacity of the parking lot. Option C.

For more such questions on expressions.

https://brainly.com/question/1859113

#SPJ8

A culture of bacteria has an initial population of 350 bacteria and doubles every 6
hours. Using the formula P = Po 22, where Pt is the population after t hours, Po
is the initial population, t is the time in hours and d is the doubling time, what is the
population of bacteria in the culture after 7 hours, to the nearest whole number?
.

Answers

The population to the nearest whole number, the population of bacteria in the culture after 7 hours is approximately 816.

How to determine the the population of bacteria in the culture after 7 hours

Based on the given formula P = Po *  2[tex]^{(t/d)}[/tex], we can calculate the population of bacteria in the culture after 7 hours.

The initial population (Po) is 350 bacteria, and the doubling time (d) is 6 hours.

Let's substitute the values into the formula and calculate:

P = Po * 2[tex]^{(t/d)}[/tex]

P = 350 * 2[tex]^{(7/6)}[/tex]

Using a calculator or simplifying the exponent manually, we have:

P ≈ 350 * 2[tex]^{(1.1667)}[/tex]

Calculating 2^(1.1667), we get approximately 2.3323.

P ≈ 350 * 2.3323

P ≈ 816.31

Rounding the population to the nearest whole number, the population of bacteria in the culture after 7 hours is approximately 816.

Learn more about population at https://brainly.com/question/29885712

#SPJ1

Help me with 8 pls
-5 10
-3 6
-1 2

Answers

Answer:

12

Step-by-step explanation:

Select any two random points on the graph of the line (preferably with integer coordinates).

Label them as A and B (in any order).

Calculate the "rise" from A to B. While going vertically from A to B, if we have to go. ...

Calculate the "run" from A to B. ...

Now, use the formula: slope = rise/run.

Answer:

a) -2

b) 1/2

Step-by-step explanation:

To find the slope given 2 points use the formula:
[tex]\frac{y_2-y_1}{x_2-x_1}[/tex]

Use the 2 points:

(-5,10)

(-3,6)

[tex]\frac{6-10}{-3+5}\\ \frac{-4}{2} \\-2[/tex]

So, a has a slope of -2.

Given the 2 points on the graph:

(-1,4)

(-5,2)

use the same formula:

[tex]\frac{2-4}{-5+1}\\ \frac{-2}{-4}\\ 1/2[/tex]

so b has a slope of 1/2

Hope this helps! :)

Work out 80 000 000 ÷ 200 Give your answer in standard form.

Answers

[tex]{\huge{\blue{\bold{\mathfrak{Step\:by\:step\: solution}}}}}[/tex]

To divide 80,000,000 by 200, we can follow these steps:

1. Write out the division problem: 80,000,000 ÷ 200

2. Divide the first digit of the dividend (8) by the divisor (2), which gives us 4.

3. Write 4 above the second digit of the dividend (0), which gives us 40.

4. Subtract 40 from 80, which gives us 40.

5. Bring down the next digit of the dividend (0), which gives us 400.

6. Divide 400 by 200, which gives us 2.

7. Write 2 above the 0 in the dividend, which gives us 4000.

8. Subtract 4000 from 4000, which gives us 0.

So the answer is 400,000. To write it in standard form, we move the decimal point 5 places to the left, which gives us:

[tex]\purple{4 \times {10}^{5}} [/tex]

The answer is:

400,000

Work/explanation:

Divide:

80 000 000 ÷ 200

[tex]\sf{400,000}[/tex]

The answer is already in standard form.

Fill in the table using this function rule y = 5+5x

Answers

Using the function rule y = 5 + 5x, we can fill in the table as follows:

x | y

0 | 5

1 | 10

2 | 15

3 | 20

4 | 25

To fill in the table using the function rule y = 5 + 5x, we can substitute different values of x into the equation and calculate the corresponding values of y.

Let's create a table:

x | y

0 | 5 + 5(0) = 5 + 0 = 5

1 | 5 + 5(1) = 5 + 5 = 10

2 | 5 + 5(2) = 5 + 10 = 15

3 | 5 + 5(3) = 5 + 15 = 20

4 | 5 + 5(4) = 5 + 20 = 25

Using the function rule y = 5 + 5x, we can substitute each value of x into the equation to find the corresponding value of y. For example, when x = 0, y = 5. When x = 1, y = 10, and so on.

Therefore, the completed table is:

x | y

0 | 5

1 | 10

2 | 15

3 | 20

4 | 25

These values satisfy the given function rule y = 5 + 5x.

for such more question on function

https://brainly.com/question/11624077

#SPJ8

Instructions: Identify the type of sequence and write the explicit rule. write Explicit Rule Sequence: -39, -45, 51, 57,... Type: Arithmetic e Explicit Rule: ​

Answers

The given sequence does not follow a simple arithmetic or geometric pattern, making it challenging to determine an explicit rule based on the given terms.

To identify the type of sequence and write the explicit rule, we need to examine the pattern of the given sequence: -39, -45, 51, 57, ...

By observing the differences between consecutive terms, we can determine if it follows an arithmetic or geometric pattern.

Arithmetic sequences have a common difference between each term, meaning that by adding (or subtracting) the same value repeatedly, we can generate the sequence. Geometric sequences, on the other hand, have a common ratio between each term, meaning that by multiplying (or dividing) by the same value repeatedly, we can generate the sequence.

Let's calculate the differences between consecutive terms:

-45 - (-39) = -6

51 - (-45) = 96

57 - 51 = 6

From the differences, we can see that the sequence is not arithmetic since the differences are not constant. However, the differences alternate between -6 and 6, indicating a possible geometric pattern.

Let's calculate the ratios between consecutive terms:

-45 / (-39) ≈ 1.1538

51 / (-45) ≈ -1.1333

57 / 51 ≈ 1.1176

The ratios are not constant, indicating that the sequence is neither geometric nor arithmetic.

Therefore, the given sequence does not follow a simple arithmetic or geometric pattern, and it is difficult to determine the explicit rule based on the given terms. It is possible that the sequence follows a more complex pattern or rule that is not apparent from the given terms.

For more such question on arithmetic. visit :

https://brainly.com/question/7882626

#SPJ8

What is the sum of 12-5i and -3+4i?

Answers

Answer:

9 and -i

Step-by-step explanation:

12-3 + 5i-4i

9 + -i

9-i

How many solutions exist for the absolute value of 1/2x+1=5

Answers

There exists two solutions to the absolute value function |0.5x + 1| = 5.

How to solve the absolute value function?

The absolute value function in this problem is defined as follows:

|0.5x + 1| = 5.

The first solution is obtained as follows:

0.5x + 1 = -5

0.5x = -6

x = -6/0.5

x = -12.

The second solution is obtained as follows:

0.5x + 1 = 5

0.5x = 4

x = 4/0.5

x = 8.

More can be learned about absolute value functions at https://brainly.com/question/3381225

#SPJ1

The highest point in California
is Mt. Whitney at 14,494 ft
above sea level. The lowest
point in California is Death
Valley, which has an "altitude"
of -282 ft (282 ft below sea
level). Find the difference in
the elevations of the highest
point and lowest point in
California.

Answers

The difference in elevations is 14,212 feet.

What is elevation?

The action or fact of raising or being raised to a higher or more important level, state, or position. Elevation is distance above sea level. Elevations are usually measured in meters or feet. They can be shown on maps by contour lines, which connect points with the same elevation; by bands of color; or by numbers giving the exact elevations of particular points on the Earths surface.

Given:

The highest point in California is Mount Whitney at 14,494 feet above sea level. The lowest point is the Death Valley at 282 feet below sea level

The positive 14,494 minus 282 feet would be a difference of 14,212 feet.

So, the difference is 14,212 feet.

Therefore, the difference in elevations is 14,212 feet.

Learn more details about elevations at:

https://brainly.com/question/29477960

The inequality 5m − 7 > 16 holds true for all numbers
than
in the set {1, 2, 3, 4, 5, 6, 7, 8, 9, 10}.

Answers

The inequality 5m - 7 > 16 holds true for the values m = 6, 7, 8, 9, and 10, in the set {1, 2, 3, 4, 5, 6, 7, 8, 9, 10}.

To determine the values for which the inequality 5m - 7 > 16 holds true, we can solve it algebraically and then check if each value in the given set satisfies the inequality.

Let's solve the inequality:

5m - 7 > 16

Adding 7 to both sides, we have:

5m > 23

Dividing both sides by 5, we get:

m > 23/5

Now we need to check if each number in the set {1, 2, 3, 4, 5, 6, 7, 8, 9, 10} satisfies the inequality m > 23/5.

For m = 1:

1 is not greater than 23/5, so the inequality does not hold true.

For m = 2:

2 is not greater than 23/5, so the inequality does not hold true.

For m = 3:

3 is not greater than 23/5, so the inequality does not hold true.

For m = 4:

4 is not greater than 23/5, so the inequality does not hold true.

For m = 5:

5 is not greater than 23/5, so the inequality does not hold true.

For m = 6:

6 is greater than 23/5, so the inequality holds true.

For m = 7, 8, 9, and 10:

All these values are also greater than 23/5, so the inequality holds true for them as well.visit

For more such question on inequality visit:

https://brainly.com/question/30238989

#SPJ8

im not sure what goes in the blanks i need answers please

Answers

Step-by-step explanation:

Remember that

[tex](a + b) {}^{2} = {a}^{2} + 2ab + {b}^{2} [/tex]

So

[tex](2x) {}^{2} = 4 {x}^{2} [/tex]

So the first blank is 4

[tex]2ab = 2(2x)(3) = 12x[/tex]

So the second blank is 12

And finally

[tex]3 {}^{2} = 9[/tex]

So the final blank is 9.

Kayla can see that the measure of Angle I and Angle J
form a straight line. Since Kayla knows that a straight line has
an angle measure of 180°, what is the measure (in degrees) of
Angle J? please answer as quickly as you can

Answers

Angle J is equal to 90°.Hence, the measure of Angle J is 90°.

Kayla can see that the measure of Angle I and Angle J form a straight line. Since Kayla knows that a straight line has an angle measure of 180°, what is the measure (in degrees) of Angle J

Given,The angle formed by angle I and J is a straight line which measures 180°.We need to find the measure of angle J.To find the measure of angle J, we need to find out the angle measure of angle I.

From the above information, we know that the angle formed by angle I and J is a straight line that measures 180°.So,Angle I + Angle J = 180°Substitute Angle I in terms of Angle J. We know that the angles are supplementary and they add up to 180 degrees.

If we know the measure of one of the angles, we can find the measure of the other angle as well.So ,Angle I = 180° - Angle JNow, substitute the value of Angle I in the above equation.Angle I + Angle J = 180°(180° - Angle J) + Angle J = 180°180° - Angle J + Angle J = 180°

Thus, Angle J is equal to 90°.Hence, the measure of Angle J is 90°.

For more questions on Angle .

https://brainly.com/question/28394984

#SPJ8

find two functions f and g

a. f(x) =
b. f(x) =

Answers

The functions f and g are:

a. f(x) = 1/x

b. g(x) = x + 2

a) To find two functions f and g such that (fog)(x) = 1/(x + 2), we need to determine how the composition of the two functions f and g produces the given expression.

Let's start by assuming g(x) = x + a, where a is a constant. This means that g(x) adds the constant a to the input x.

Next, let's determine the function f(x) such that (fog)(x) results in the desired expression. We have:

(fog)(x) = f(g(x)) = f(x + a)

b) To simplify the expression 1/(x + 2) and make it match f(g(x)), we can consider f(x) = 1/x.

Substituting the expressions for f(x) and g(x) into (fog)(x), we have:

(fog)(x) = f(g(x)) = f(x + a) = 1/(x + a)

Comparing this with the desired expression 1/(x + 2), we see that a = 2. Therefore, the functions f and g are:

a. f(x) = 1/x

b. g(x) = x + 2

Using these functions, we can verify the composition (fog)(x):

(fog)(x) = f(g(x)) = f(x + 2) = 1/(x + 2)

Thus, (fog)(x) = 1/(x + 2), which matches the desired expression.

For more such question on functions. visit :

https://brainly.com/question/11624077

#SPJ8

A cruise ship is traveling south going approximately 22 mph when it hits the Gulf
Stream flowing east at 4mph.
Show your work.

Find the resultant direction. Round to the nearest tenth.

Answers

The cruise ship's resultant velocity is approximately 22.67 mph, and its direction is approximately 10.2 degrees south of east.

To find the resultant direction, we can use vector addition. Let's represent the southward velocity of the cruise ship as vector A and the eastward velocity of the Gulf Stream as vector B.

Given:

Magnitude of vector A (southward velocity of the cruise ship) = 22 mph

Magnitude of vector B (eastward velocity of the Gulf Stream) = 4 mph

To find the resultant velocity, we add the two vectors together. Since the vectors are perpendicular to each other, we can use the Pythagorean theorem to find the magnitude of the resultant vector:

Resultant velocity = √(A^2 + B^2) = √(22^2 + 4^2) ≈ 22.67 mph

Now, to find the direction of the resultant vector, we can use trigonometry. The angle between the resultant vector and the south direction can be calculated as:

θ = arctan(B / A) = arctan(4 / 22) ≈ 10.17 degrees

For such more questions on velocity

https://brainly.com/question/25749514

#SPJ8

If the coordinates of point A are (8 , 0) and the coordinates of point B are (3 , 7), the y-intercept of what

Answers

Answer: Assuming that you're asking what the y-intercept is, 11.2.

Step-by-step explanation:

y = mx + c,

where m is the slope and c is the y-intercept.

To calculate the slope, we use the formula:

m = (y2 - y1) / (x2 - x1),

where (x1, y1) and (x2, y2) are the coordinates of points A and B, respectively.

Using the coordinates of points A and B, we have:

m = (7 - 0) / (3 - 8)

m = 7 / (-5)

m = -7/5

Now we can substitute the values of the slope (m) and the coordinates of one point (A) into the slope-intercept form to solve for the y-intercept (c):

0 = (-7/5)(8) + c

0 = -56/5 + c

To isolate c, we can add 56/5 to both sides:

56/5 = c

Therefore, the y-intercept of the line passing through points A (8, 0) and B (3, 7) is (0, 56/5) or 11.2 when expressed as a decimal.

46. Divide $5000 along A, B and C so that A may receive
1/4th much as B and C together and B gets 1/3rd of
what A and C received together. Find how much B
gets?
A. 1000
C. 1250
B. 2750
D. 2500

Answers

Amount received by B can be calculated by solving the equation, Amount received by B = $2750So, the amount B gets is $2750.

The correct option for the given question is B. 2750.Divide $5000 along A, B and C so that A may receive 1/4th much as B and C together and B gets 1/3rd of what A and C received together.

The amount that B gets.

Let's suppose the amount B gets is x.

Now, we can proceed as given below:

Given that the total amount = $5000

Amount received by A = (1/4) * (Amount received by B and C)

Amount received by B = (1/3) * (Amount received by A and C)

Amount received by C = (Amount received by B and A) - (Amount received by B)

Now, we have,Amount received by B + Amount received by C = 3 * Amount received by B/3 + Amount received by A/3

Amount received by A = (1/4) * [Amount received by B + Amount received by C]

Amount received by B = (1/3) * [Amount received by A + Amount received by C]

Amount received by C = [Amount received by B + Amount received by A] - [Amount received by B]

Let's solve this problem in detail: Amount received by A = (1/4) * (Amount received by B + Amount received by C)

Now, Amount received by A = (1/4) * ($5000 - Amount received by A)

By solving the above equation,

Amount received by A = $1000Amount received by B = (1/3) * (Amount received by A + Amount received by C)

Also, Amount received by B + Amount received by C = 3 * Amount received by B/3 + Amount received by A/3

Again, $5000 - Amount received by A = 2 * (Amount received by B + Amount received by C)

By substituting the value of Amount received by A in the above equation,Amount received by B + Amount received by C = $3000

Amount received by B = (1/3) * [Amount received by A + Amount received by C]

For more related questions on Amount received:

https://brainly.com/question/29807602

#SPJ8

Alex opened a savings account with an intial deposit of $50. Each month, he deposits the same amount of money. He uses the equation t = 50 + 25m to determine t, the total amount of money in his savings account in m months. What is the unit rate and what is the meaning of the unit rate

Answers

Answer:

The unit rate is 25$

Step-by-step explanation:

The unit rate gives the amount by which the money in the his account increases per month. It measures the rate of increase in the account.Which in this case the unit rate is 25$

table represents an exponential function.
What is the interval between neighboring
x-values shown in the table?
What is the ratio between neighboring y-values?

Answers

The interval between neighboring x value is 1

the ratio between neighboring y-values 1

How to find the interval between neighboring x value

To find interval between neighboring x value, we subtract as follows

interval = 2 - 1 = 3 - 2 = 4 - 3 = 5 - 4 = 1

To find the ratio between neighboring y-values, we divide

ratio = 4 / 1 = 16/4 = 256 / 16 = 1024 / 256 = 4

Learn more about exponential function at

https://brainly.com/question/2456547

#SPJ1

complete question

The table below represents an exponential function.

x

1

2

3

4

5

y

1

4

16

256

1,024

What is the interval between neighboring

X-values shown in the table?

What is the ratio between neighboring y-values?

What type of transformation takes the graph of f(x)=|x| to the graph of g(x)=2.5|x|?

Answers

Answer:

Vertical Stretch

Step-by-step explanation:

The parent function [tex]f(x)=|x|[/tex] when multiplied by 2.5 is a vertical stretch of the absolute value equation. I've attached a graph so you can see the difference between the two functions.

Which values of a, b, and c correctly complete the division?
1/5 5/6= x b/c

O a-4,b-5,c-8
○a-1,b-8,c-5
O a-1,b-5,c-8
O a-4,b-8,c-5

Answers

The values of `a, b,` and `c` correctly complete the division of [tex]$$\frac{1}{5}\div \frac{5}{6}[/tex] = [tex]\frac{6}{25}$$[/tex] is `a-1, b-5, c-8`. The correct option is $\boxed{\textbf{(C)}\ a-1,b-5,c-8}$.

To complete the division in the correct manner, the value of `x, b, and c` is to be calculated.

The given fraction is:

[tex]\frac{1}{5}\div \frac{5}{6}[/tex]

= [tex]\frac{1}{5}\cdot \frac{6}{5}[/tex]

= [tex]\frac{6}{25}$$[/tex]

Therefore, the value of `x` is `6`.

Now, we have the equation `5/6 = 6/bc` that is to be solved for `b` and `c`.

Multiplying both sides of the above equation with `bc`,

we get:

[tex]\frac{5bc}{6} = 6$$[/tex]

Multiplying both sides of the equation by `6/5`, we get:

[tex]bc = \frac{36}{5}$$[/tex]

Therefore, the values of `a, b,` and `c` correctly complete the division of [tex]$$\frac{1}{5}\div \frac{5}{6}[/tex] = [tex]\frac{6}{25}$$[/tex] is `a-1, b-5, c-8`.

Hence, the correct option is $\boxed{\textbf{(C)}\ a-1,b-5,c-8}$.

For more related questions on values:

https://brainly.com/question/9796766

#SPJ8

The values of a, b and c in the expression are a = 1, b = 1 and c = 6

How to determine the values of a, b and c

From the question, we have the following parameters that can be used in our computation:

1/5 * 5/6 = a * b/c

From the above, we have

1/5 * 5/6 = a * b/c

Evaluate the products

1/6 = a * b/c

Rewrite the expression as

1 * 1/6 = a * b/c

By comparison, we have

a = 1, b = 1 and c = 6

Read ore about expression at

https://brainly.com/question/31819389

#SPJ1

What is the quotient of (x³ - 3x² + 5x - 3) + (x - 1)?
Ox²-2x-3
Ox²+2x+7
Ox²-3x+8
Ox²-2x+3

Answers

Answer:

  (d)  x² -2x +3

Step-by-step explanation:

You want the quotient (x³ - 3x² + 5x - 3) ÷ (x - 1).

Quick Check

The constant in a product will be the product of the constants in the factors. That is if (x² +bx +c) is a factor of the cubic, we must have ...

  -1·c = -3 . . . . . . . where the other factor is (x -1), having constant -1

  c = 3

Only one answer choice matches: x²-2x+3.

Synthetic division

Using synthetic division to find the entire quotient can be almost as fast.

The tableau is shown in the attachment. It tells you the quotient is ...

  x² -2x +3

__

Additional comment

"The entry in the left part of the table" is the zero of the binomial divisor. The divisor (x-1) is zero when x=1, so that entry is 1.

<95141404393>

2. A company owns two flourmills (A and B) which have different production capacities for HIGH, MEDIUM and LOW grade flour. This company has entered contract supply flour to a firm every week with 12, 8, and 24 quintals of HIGH, MEDIUM and LOW grade respectively. It costs the Co. $1000 and $800 per day to run mill A and mill B respectively. On a day, mill A produces 6, 2, and 4 quintals of HIGH, MEDIUM and Low grade flour respectively. Mill B produces 2, 2 and 12 quintals of HIGH, MEDIUM and LOW grade flour respectively. How many days per week should each mill be operated in order to meet the contract order most economically. Solve the problem graphically.​

Answers

Mill A and Mill B should be operated for 6 days each in order to meet the contract order most economically

Understanding Economic Production of Flour

Let's define the variables:

- Let 'x' represent the number of days mill A is operated per week.

- Let 'y' represent the number of days mill B is operated per week.

We need to minimize the cost function, which is the sum of the operating costs for both mills:

Cost = 1000x + 800y

Now, let's consider the production constraints:

For the HIGH grade flour:

Mill A produces 6 quintals per day, so the total weekly production is 6x.

Mill B produces 2 quintals per day, so the total weekly production is 2y.

To meet the contract requirement of 12 quintals per week, we have the constraint:

6x + 2y ≥ 12

For the MEDIUM grade flour:

Mill A produces 2 quintals per day, so the total weekly production is 2x.

Mill B produces 2 quintals per day, so the total weekly production is 2y.

To meet the contract requirement of 8 quintals per week, we have the constraint:

2x + 2y ≥ 8

For the LOW grade flour:

Mill A produces 4 quintals per day, so the total weekly production is 4x.

Mill B produces 12 quintals per day, so the total weekly production is 12y.

To meet the contract requirement of 24 quintals per week, we have the constraint:

4x + 12y ≥ 24

The graph will have the axes 'x' and 'y' representing the number of days mill A and mill B are operated, respectively.

Let's solve the problem graphically:

To plot each constraint, we can convert them into linear equations:

1) 6x + 2y ≥ 12

  Rewrite as: 3x + y ≥ 6

  Plot the line: 3x + y = 6

  From the graph, Mill A should be operated for 2 days per week while Mill B should be operated for 6 days per week.

2) 2x + 2y ≥ 8

  Rewrite as: x + y ≥ 4

  Plot the line: x + y = 4

  From the graph, Mill A should be operated for 4 days per week while Mill B should be operated for 4 days per week.

3) 4x + 12y ≥ 24

  Rewrite as: x + 3y ≥ 6

  Plot the line: x + 3y = 6

  From the graph, Mill A should be operated for 6 days per week while Mill B should be operated for 2 days per week.

Learn more about economics of production here:

https://brainly.com/question/16755022

#SPJ1

Question for experts !

Recommend books for partial differential equations from beginner to advanced

Answers

Answer:

Here are some recommended books on partial differential equations (PDEs) from beginner to advanced level:

1. "Partial Differential Equations: An Introduction" by Walter A. Strauss: This is a great introductory book on PDEs that covers the basics of first-order equations, second-order equations, and higher-order equations.

2. "Partial Differential Equations" by Lawrence C. Evans: This is a more advanced textbook that covers a wide range of topics in PDEs, including elliptic equations, parabolic equations, hyperbolic equations, and conservation laws.

3. "Nonlinear Partial Differential Equations" by Peter J. Olver: This is an advanced book that covers the theory and applications of nonlinear PDEs, including Hamiltonian systems, solitons, and integrable systems.

4. "Introduction to the Theory of Nonlinear Elliptic Equations" by V. G. Maz'ya and S. Poborchi: This is an advanced book that provides a comprehensive introduction to the theory of nonlinear elliptic equations.

5. "Geometric Partial Differential Equations and Image Analysis" by Guillermo Sapiro: This is an advanced book that covers the application of PDEs to image analysis, including topics such as denoising, segmentation, and registration.

These books provide a good foundation for understanding PDEs and their applications, and can be useful for students and researchers at various levels of expertise.

You have a 12 inch by 14 inch picture that you framed. When you hung the picture, you found that the entire area is 261.44 inches squared. What is the width of the frame?

Answers

The width of the frame is 1 inch.

To determine the width of the frame, we must subtract the area of the picture from the total area.

Therefore: total area - picture area = frame area

261.44 - 168 = 93.44 square inches

The frame area can also be calculated by multiplying the frame width by 2 (since there are two sides of the frame) and adding it to the picture dimensions.

Thus:2w + 12 = length2w + 14 = width where w is the width of the frame.

Using the above equations, we can solve for w: 2w + 12 = 14, 2w = 2, and w = 1

Therefore, the width of the frame is 1 inch.

For more questions on area

https://brainly.com/question/2607596

#SPJ8

14 Find the distance between the two points. Imagine a right triangle connecting the two points. (-3,2) www (2,-2) Hint: Find the base of the triangle by calculating the distance between the x-values of each point. Jay |2 - (-3) = [?]​

Answers

The distance between the points (-3, 2) and (2, -2) is approximately sqrt(41), which is an irrational number.

To find the distance between two points (-3, 2) and (2, -2), we can use the Pythagorean theorem and consider the points as the vertices of a right triangle.

The base of the triangle is the horizontal distance between the x-values of the two points.

In this case, it is given by:

Base = 2 - (-3) = 2 + 3 = 5

Next, we need to find the height of the triangle, which is the vertical distance between the y-values of the two points. It is given by:

Height = -2 - 2 = -4

Now, we have the base and the height of the triangle.

To find the distance between the two points, we can use the Pythagorean theorem, which states that the square of the hypotenuse (distance) is equal to the sum of the squares of the other two sides (base and height).

Using the Pythagorean theorem:

Distance^2 = Base^2 + Height^2

Distance^2 [tex]= 5^2 + (-4)^2[/tex]

Distance^2 = 25 + 16

Distance^2 = 41

To find the distance, we take the square root of both sides:

Distance = sqrt(41).

For similar question on distance.

https://brainly.com/question/18312428  

#SPJ8

Other Questions
Define Boundary Value Analysis and apply its concept in generation of test casesfor the program that calculates median of three numbers. Input for this program is atriple of positive integers a, b, c and values are in the interval [1,2000] Please help me with this! :D Match the logical fallacy to the correct definition. Based on insufficient evidence: A: False dichotomy. B: Authority. C: Hasty generalization.Uses someone who is not an expert on the issue: A: False dichotomy. B: Authority. C: Hasty generalization.Identifies only two choices, one of which is not viable: A: False dichotomy. B: Authority. C: Hasty generalization. which of these reproductive system hormones is mismatched to its source? which of these reproductive system hormones is mismatched to its source? inhibin; gonads lh; anterior lobe of pituitary gland testosterone; posterior lobe of pituitary gland fsh; anterior lobe of pituitary gland List all elements of the Power Set P(S) for set S, with S = { a, e, i, o }. State how many elements are in P(S). Calculate the pH at 25C of a 0.20M solution of potassium cyanide (KCN). Note that hydrocyanic acid (HCN) is a weak acid with a pKaof 9.2I. Round your answer to 1 decimal place. 4. Why does a recession cause a trade deficit to increase? What Is The Sum Of The Following Series? 4+4(0.2)+4(0.2)2+4(0.2)3+4(0.2)4+4(0.2)5+ Round Your Answer To On Suppose X1Xn is a sample of successes and failures from a Bernoulli population with probability of success p. Let Ex-272 with n=400. Then a 75% confidence interval for p is: Please choose the best answer. a) .68 0288 Ob) .68 .037 c) .68 .0323 d) .68 0268 e) 68 0258 Write a fortran 90 program using subroutineLet A be the 50x50 tridiagonal matrix as shown below : -1 0-1 500.-1150...00. ....:::000...5-1 50000-1c123r49r501234950Consider the problem Ax = b, find the solutions for the following vectors bb = [1,2,3,...,49,50]T . Use the bisection method procedure to solve (approximately) the following non-linear mathematical model? Maximize f(x)=3x 3x 52xx 7use an error tolerance =0.06 and initial bounds x=0, x=1.2, and stopping criteria: x x=2 Let's assume, we are writing a SAS code for the following table: Let's assume our SAS code is the following: title "Car data": proc print data = sashelp.cars; By make; Var make model type msrp invoice; Where Invoice >3500 and Invoice The amount a business can reasonably expect to collect for a service is referred to as:a. chargesb. costsc. revenuesd. expenses2. Which of the following is one of the three types of cash flows:a. Supply chain activitiesb. Financing activitiesc. Banking activitiesd. Revenue activitiesDuring January, Wells Corporation purchased $100,000 of inventory; they paid one-fourth in cash, and signed a note for the remaining balance.3. This transaction will have the following effect on the accounting equation:a. Increase Inventory 100,000; increase Accounts Payable 25,000; decrease Cash 75,000b. Increase Inventory 100,000; decrease Cash 75,000; increase Notes Payable 25,000c. Increase Inventory 100,000; decrease Cash 25,000; increase Notes Payable 75,000d. Increase Inventory 100,000; decrease cash 25,000; increase Accounts Payable 75,000 An aluminum can is to be constructed to contain 2200 cm 3of liquid. Let r and h be the radius of the base and the height of the can respectively. a) Express h in terms of r. (If needed you can enter as pi.) h= b) Express the surface area of the can in terms of r. Surface area = c) Approximate the value of r that will minimize the amount of required material (i.e. the value of r that will minimize the surface area). What is the corresponding value of h ? r=h= Classify the characteristics of each grazing method. the brand of volleyball a D1 women's volleyball uses in season and how much their forearms hurt after practice.The explanatory variable is the brand of volleyball.The response variable is how much the forearms of the players hurt (not at all hurt, medium hurt, or extreme hurt).give the following:(a) categories for each variable that you would use if you are performing a two-sample z procedure(b) categories for each variable that you would use if you are performing a Chi-square test (these may overlap with the ones you use for part Triangle ABC was dilated using the rule D 5/4Point Y is the center of dilation. Triangle A B C is dilated to form triangle A prime B prime C prime.If CA = 8, what is C'A'?10 units12 units16 units20 units According to the University of Nevada Center for Logistics Management, 8% of all merchandise sold in the United States gets retumed. A. Houston department store sampled 70 items sold in January and found that 12 of the items were returned. a. Construct a point estimate of the proportion of items returned for the population of sales transactions at the Houston store. (to 4 decimals) b. Construct a 90% confidence interval for the proportion of returns at the Houston store. ) (to 4 decimals) c. Is the proportion of returns at the Houston store significantly different from the returns for the nation as a whole? Provide statistical support for your answer. Since the confidence interval 0.08, we conclude that the return rate for the Houston store the U.S, national return rate. What is the degree of freedom of a particle in a three-dimensional space that cannot move in y direction. You want to receive $400 at the end of each month for 3 years. Interest is 9.6% compounded monthly. (a) How much would you have to deposit at the beginning of the 3-year period? (b) How much of what you receive will be interest? (a) The deposit is $ (Round the final answer to the nearest cent as needed. Round all intermediate values to six decimal places as needed.) (b) The interest is $ (Round the final answer to the nearest cent as needed. Round all intermediate values to six decimal places as needed.)