Answer: The boiling point of a 3.70 m solution of phenol in benzene is [tex]89.5^0C[/tex]
Explanation:
Elevation in boiling point:
[tex]\Delta T_b=i\times k_b\times m[/tex]
where,
[tex]\Delta T_b[/tex] = change in boiling point
i= vant hoff factor = 1 (for benzene which is a non electrolyte )
[tex]k_b[/tex] = boiling point constant = [tex]2.53^0C/kgmol[/tex]
m = molality = 3.70
[tex]T_{solution}-T_{solvent}=i\times k_b\times m[/tex]
[tex]T_{solution}-80.1^0C=1\times 2.53\times 3.70[/tex]
[tex]T_{solution}=89.5^0C[/tex]
Thus the boiling point of a 3.70 m solution of phenol in benzene is [tex]89.5^0C[/tex]
Answer:
First Question:
C. ΔTb = Kbm
Second Question:
C. 9.36° C
Third Question:
89.5
Explanation:
Got it right.
Consider the incomplete reaction below.
NaOH + X Right arrow. NaCH3COO + H2O
What is X in this reaction?
NH4OH
H3PO4
H2CO3
CH3COOH
A chemical reaction involves the interaction of reactants. The substance X ,must be an acid and in this case is CH3COOH
What is a reaction?In chemistry, a reaction is said to occur when substances interact in such a way that other new substances are formed.
Now let us look at the particular reaction; NaOH + X ----> NaCH3COO + H2O. The substance X must be an acid. Hence, the most likely susbstance is CH3COOH.
Learn more about reaction: https://brainly.com/question/22817140
How are industrial and agricultural pollution similar?
Answer:
Both of them are polluting the environment. Industrial pollution is the pollution caused from industries and it can be in different forms such as water waster or air pollution. Agricultural pollution is caused from plants or crops that are grown by the farmers. For example, pesticides that may ruin the soil and is dangerous for our environment.
Explanation:
what can a criminal do to make the bullet not match the gun hurry plz
Using distributive property solve 9×19
Answer:
9*(10+9)
(90+81)
(171) is the answer
The molecular formula for pentyne is
a.c6h6
b.c5h8
c.c5h12
d.c6h14
Answer:
B
Explanation:
The molecular formula for pentyne is C5H8
The concentration of 1130+ in a solution is found to be 1.75 X 10-8 M 250C. Find [OH].
Answer:
[OH] = 6.31 * 10^-7 M
Explanation:
Mathematically;
pH + pOH = 14
Mathematically;
pH = -log [H3O+]
also;
pOH = -log [OH]
From the question; [H3O+] = 1.75 * 10^-8 M
pH = -log [1.75 * 10^-8]
pH = 7.76
since pH is normally given to 1 decimal place
we can say pH = 7.8
Now;
pH + pOH = 14
pOH = 14-7.8
pOH = 6.2
now pOH = -log [OH]
[OH] = -antilog 6.2
[OH] = 6.31 * 10^-7 M
A balloon containing helium gas expands from 230 mL to 860 mL as more helium is added. What was the initial quantity of helium present if the expanded balloon contains 3.8 × 10-4 mol, assuming constant temperature and pressure? Which of the variables are known?
Answer and Explanation:
For computing the initial quantity of helium we have to apply the law of ideal gas which is shown below:
[tex]pV=nRT\[/tex]
[tex]n=\dfrac{pV}{RT}[/tex]
Now we have to compute the ratio between the initial and the final numbers of moles which is
[tex]\dfrac{n_1}{n_2}=\dfrac{\dfrac{p_1V_1}{RT_1}}{\dfrac{p_2V_2}{RT_2}}[/tex]
The statement defines that
[tex]T_1=T_2,~p_1=p_2.[/tex]
Therefore
[tex]\dfrac{n_1}{n_2}=\dfrac{V_1}{V_2}[/tex]
[tex]\dfrac{n_1}{3.8\times10^{-4}}=\dfrac{230}{860}\iff\\\\ n_1=\dfrac{3.8\times10^{-4}\times230}{860}[/tex]
[tex]\boxed{n_1\approx1.0\times10^{-4}~mol}[/tex]
And, the variables are known is starting volume and ending gas quantity
Answer:
beginning volume and ending quantity of gas
Explanation:
what is the answer to y=1/2-x+1
Answer:
X= -Y + 2/2 Y=-X + 3/2
Explanation:
I don't know how to simplify it anymore. You would get x=-y+3/2 and y=-x+3/2
Answer:
Explanation:
(-1/2,1)
-pls help will mark brainliest-
Answer:
Explanation: d
This formula equation is unbalanced. Pb(NO3)2(aq) + Li2SO4(aq) Right arrow. PbSO4(s) + LiNO3(aq) Which coefficient should appear in front of LiNO3 in the balanced equation? 1 2 3 4
Answer:2
Explanation:
Answer:
2
Explanation:
How to find the final temperature
Answer:
The final temperature will be "12.37°".
Explanation:
The given values are:
mass,
m = 0.125 kg
Initial temperature,
c = 22.0°C
Time,
Δt = 4.5 min
As we know,
⇒ [tex]q=mc \Delta t[/tex]
On putting the estimated values, we get
⇒ [tex]=0.125\times 22.0\times 4.5[/tex]
⇒ [tex]=12.37^{\circ}[/tex]
A student places a 12-gram cube of Ice Inside a container. After six hours, the student returns to observe the contents of the container. Which
sentence suggests that the container is an open system?
ОА
The container contains 12 grams of liquid water and no ice.
B.
The container contains 12 grams of Ice and no liquid water.
D.
The container contains 8 grams of liquid water and no ice.
The container contains 8 grams of ice and 4 grams of liquid water.
The container contains 8 grams of liquid water and 4 grams of water vapor.
E
Answer:
I think its D sorry if im wrong
Answer:i think its D
Explanation:
How many significant figures does 5.750 have?
Answer:
4
Explanation:
What is the molarity of a solution that contains 6 moles of NaCl in 3 L of solution?
a
2.0 M
b
0.5 M
c
0.25 M
d
18.0 M
Answer:
a
2.0 M
Explanation:
divide 6by 3
formula : molarity=moles divided by volume of solutions
Why does the ionization energy change when moving down a group of elements?
The number of valence electrons increases.
The nuclear positive charge increases.
The energy levels are increasing.
The attractive force decreases as the atom gets larger.
Answer:
D) The attractive force decreases as the atom gets larger.
Explanation:
i did the lesson and tried all 3, all 3 times, this was the last one and only choice left so it has to be.
Answer:
The attractive force decreases as the atom gets larger.
Explanation:
What type of mixture is fog?
O A. A homogenous mixture of a solid in a gas
B. A heterogeneous mixture of a liquid in a gas
C. A homogenous mixture of a liquid in a gas
D. A heterogeneous mixture of a solid in a gas
Answer:
. A homogeneous mixture of a solid in a gas
A catalyst can only be used once.
True
False
Answer:
False
Explanation:
Catalysts are reusable because they keep the chemical reactions moving without being consumed.
H3PO4 + Ca(OH)2 → Ca(H2PO4)2 + H2O
Given question is incomplete. The complete question is as follows.
Balance the following equation:
[tex]H_3PO_4 + Ca(OH)_2 \rightarrow Ca(H_2PO_4)_2 + H_2O[/tex]
Answer: The balanced chemical equation is as follows.
[tex]2H_3PO_4 + Ca(OH)_2 \rightarrow Ca(H_2PO_4)_2 + 2H_2O[/tex]
Explanation:
When a chemical equation contains same number of atoms on both reactant and product side then this equation is known as balanced equation.
For example, [tex]H_3PO_4 + Ca(OH)_2 \rightarrow Ca(H_2PO_4)_2 + H_2O[/tex]
Number of atoms on reactant side:
H = 5
P = 1
O = 6
Ca = 1
Number of atoms on product side:
H = 6
P = 2
O = 9
Ca = 1
In order to balance this equation, we will multiply [tex]H_3PO_4[/tex] by 2 on reactant side and we will multiply [tex]H_2O[/tex] by 2 on product side. Hence, the balanced chemical equation is as follows.
[tex]2H_3PO_4 + Ca(OH)_2 \rightarrow Ca(H_2PO_4)_2 + 2H_2O[/tex]
what is an example of a soultion
Answer:
Did you mean solution??
In chemistry, a solution is considered as a special type of homogeneous mixture composed of two or more substances. In such a mixture, a solute is a substance dissolved in another substance, known as a solvent.
Eg: sweet tea or coffee (sugar added to solution)
bleach (sodium hypochlorite dissolved in water)
HOPE IT HELPS :)
For neap tides, what must the angular alignment be between the sun, earth and moon?
Answer:
The angular alignment is 90 degrees
Explanation:
The neap tide is a type of tide which occurs around seven days after a spring tide. This type of tide happens twice every month.
The tide is usually moderate and it exists when the sun and moon are usually at right angles to each other when it occurs. A right angle is also known as 90 degrees which validates the tide occurring at an angle 90.
How do you solve this
Answer:
23.6°C
Explanation:
Step 1:
Data obtained from the question. This include the following:
Mass = 0.125kg = 0.125 x 1000 = 125g
Initial temperature (T1) = 22°C
Heat (Q) generated in 4.5mins = 835J
Specific heat capacity (C) of water = 4.184J/g°C
Change in temperature (ΔT) =?
Final temperature (T2) =?
Step 2:
Determination of the change in temperature, ΔT of water.
This can be obtained as shown below:
Q = MCΔT
835 = 125 x 4.184 x ΔT
Divide both side by 125 x 4.184
ΔT = 835 / (125 x 4.184)
ΔT = 1.6°C
Therefore, the change in temperature, ΔT is 1.6°C
Step 3:
Determination of the final temperature of water.
This can be obtained as follow:
Initial temperature (T1) = 22°C
Change in temperature (ΔT) = 1.6°C
Final temperature (T2) =?
Change in temperature (ΔT) = Initial temperature – Final temperature
ΔT = T2 – T1
1.6 = T2 – 22
Collect like terms
T2 = 1.6 + 22
T2 = 23.6°C
Therefore, the final temperature of the water is 23.6°C.
How are ancient CO2 levels measured?
Answer:
Ancient CO₂ levels can be measured from
1) Air bubbles trapped in deep ancient ice cores (up to 800,000 years ago) or
2) Tree rings (up to 10,000 years ago)
Explanation:
The percentages of CO₂ concentration in the atmosphere from previous or ancient times are found by analyzing the CO₂ content in trapped air located in the deep ancient ice cores present in Antarctica and Greenland such as the EPICA Dome C cores
As the ice is drilled though, the air released from trapped bubbles are captured for analysis and the time frame for the captured bubbles can date back up to 800,000 years
Ancient CO₂ levels can also be measured from tree rings which provide ancient CO₂ levels up to 10,000 years
Lulu Labwrecker carefully pipets 25.0 mL of 0.525 M NaOH into a test tube. She places the test tube into a small beaker to keep it from spilling and then pipets 75.0 mL of 0.355 M HCl into another test tube. When Lulu reaches to put this test tube of acid into the beaker along with test tube of base she accidentally knocks the test tubes together hard enough to break them and their respective contents combine in the bottom of the beaker. Is the solution formed from the contents of the two test tubes acidic or basic? What is the pH of the resulting solution?
Answer:
The solution formed is acidic
pH = 0.87
Explanation:
The acid-base reaction of NaOH with HCl is:
NaOH + HCl → NaCl + H₂O
Where 1 mole of NaOH reacts with 1 mole of HCl
In the problem, moles of NaOH and HCl are:
NaOH: 0.0250L × (0.525mol / L) = 0.013125 moles NaOH
HCl: 0.0750 × (0.355mol / L) = 0.026625 moles HCl
As moles of HCl > moles NaOH, HCl is in excess and the solution formed is acidic
Moles in excess of HCl are:
0.026625 moles - 0.013125 moles = 0.0135 moles HCl
As the volume of the solutions is 25.0mL + 75.0mL = 100.0mL = 0.100L, molarity of HCl after reaction is:
0.0135 moles HCl / 0.100L = 0.135M HCl = 0.135M H⁺
As pH is defined as - log [H⁺], pH of the solution is:
pH = -log 0.135M H⁺ = 0.87
pH = 0.87
The pH of the resulting solution of the acid and base mixture is; Acidic with a PH = 0.87
We are given;
Volume of NaOH = 25 mL = 0.025 L
Volume of HCl = 75 mL = 0.075 L
Concentration of NaOH = 0.525 M
Concentration of HCl = 0.355 M
Total volume of solution = 0.025 + 0.075 = 0.1 L
Now, the the equation of the reaction is;
HCl + NaOH = NaCl + H2O
We can see that 1 mole of HCl reacts with 1 mole of NaOH.
Since; number of moles = Volume × concentration
Number of moles of HCl = 0.075 × 0.355
Number of moles of HCl = 0.026625 moles
Similarly;
Number of moles of NaOH = 0.025 × 0.525
Number of moles of NaOH = 0.013125 moles
We can see that the number of moles of HCl is greater than that of NaOH and as such there is excess HCl acid in the mix.
Thus,
Excess moles of HCl acid = 0.026625 - 0.013125
Excess moles of HCl acid = 0.0135 moles
Concentration of this excess HCl is gotten by the formula;
M = Excess moles/total volume
M = 0.0135/0.1
M = 0.135 M
PH of this excess concentration is;
PH = -log [H+]
PH = -log [0.135]
PH = 0.87
Read more about PH of resulting solution at; https://brainly.com/question/2378979
Can something be an acid and a base? Why and why not
What would heating a sealed glass jar do?
O A. Increase the size of the gas molecules
B. Increase the number of gas molecules
C. Increase the pressure of the gas inside
D. Increase the volume of the gas inside
The right response is to raise the internal gas pressure. When a sealed glass jar is heated, the temperature of the gas within rises, causing the gas molecules to travel faster and collide with the jar's walls more often and with more force, increasing the gas's pressure.
What is gas molecule?Gas molecules are made up of atoms that are linked together. These interatomic connections function similarly to springs, connecting atoms of varying masses. This connection vibrates at a constant frequency known as the natural frequency. Atoms, molecules, and/or ions are all present in gases, liquids, and solids, but their behavior varies between the three phases. The graphic below depicts the tiny differences. A gas as seen via a microscope. A gas is a condition of stuff that does not have a set volume or form. Air, water vapor, and helium are examples of gases. A gas is a kind of stuff that does not have a defined volume or shape. To put it another way, a gas takes on the shape and volume of its container.
Here,
The correct answer is Increase the internal gas pressure as When a sealed glass jar is heated, the temperature of the gas within rises, forcing the gas molecules to travel faster and hit with the jar's walls more often and with more force, raising the gas's pressure.
To know more about gas molecule,
https://brainly.com/question/29848914
#SPJ1
What is a criterion for all products made using the process of technological design? The product must be cheaper than similar products.
The product must be available to any user who wants it.
The product must solve the problem for which it was designed.
The product must be capable of solving a variety of problems.
Answer:
C. The product must solve the problem for which it was designed.
Explanation:
Technological design is the study, development and application of technological process with the intent of designing a product to solve required problem.The process could be based on the use of a computer.
Generally, technological process and development always tend to design a problem solver product. Through this process, more new technologies are produced.
Therefore in technological process, the product must solve the problem for which it was designed.
Answer:
C) The product must solve the problem for which it was designed.
Give four differences between rusting and burning
Answer:
burning is a rapid process, rustig is a slow process. burning releases light during the process,rusting does not. burning can speed up with addition of more external conditions, rusting cannot be sped up greately by addition of external materials. burning results in release of large amts of heat, rusting very little amt of heat
Hope helped
plesse give a thank
and most brainlest
-Rust happens when something is unpolished and is old. Burning has been modified by heat.
-Burning is a chemical change. Rust is a physical change.
-Burning something cannot be fixed back to its natural form, while when something is rusted it can possibly be re-used and fixed.
-The texture of something burnt is usually fragile and brittle while rust makes (metal for example) gritty.
-Rust usually forms solely on metals while almost anything can be burned.
note: you asked for 4 answers but i gave you 5 in case you didnt like any of them. Hope this helps!
There are ___________ forces of attraction between particles in the gas state. Use the following word bank to help you.
Answer:
Different
Explanation:
Napisz równania reakcji chemicznych w formie cząsteczkowej, jonowej i jonowej skróconej. Podkreśl wzory soli trudno rozpuszczalnych i podaj ich nazwy.
palmitynian potasu + chlorek magnezu
zapis cząsteczkowy reakcji...………………..
zapis jonowy...…………………….
zapis jonowy skrócony...……………….
nazwa soli trudno rozpuszczalnej...……………..
oleinian sodu + azotan (V) wapnia
zapis cząsteczkowy reakcji...………………..
zapis jonowy...…………………….
zapis jonowy skrócony...……………….
nazwa soli trudno rozpuszczalnej...……………..
Answer:idioma equivocado ????
Explanation:
Balance the equation.
SiO2 +
CaC2 →
Si +
CaO +
CO2
Answer:
5SiO[tex]_{2}[/tex] + 2CaC[tex]_{2}[/tex] → 5Si + 2CaO + 4CO[tex]_{2}[/tex]
5 2 5 2 4 are your answers.
