In order for 30mL of sodium hydroxide solution to completely react, 0.061 grams of potassium hydrogen phthalate are required.
What is mass?A measurement of the amount of matter in an item, mass is a fundamental attribute of matter. It is a scalar quantity, usually expressed in grams (g) or kilograms (kg) (kg).
How do you determine it?We must first develop and balance the chemical equation for the interaction between the two chemicals in order to determine the mass of potassium hydrogen phthalate needed to react with 30mL of sodium hydroxide at 0.01M. The correct answer is:
NaKC8H4O4 + H2O = KHC8H4O4 + NaOH
One mole of KHC8H4O4 combines with one mole of NaOH to create one mole of NaKC8H4O4 and one mole of water, as shown by the equation.
The number of moles of NaOH used in the reaction may then be calculated using the supplied NaOH concentration (0.01M) and the volume of NaOH used (30mL), using the formula:
volume x concentration equals moles of NaOH.
NaOH moles= 0.01 mol/L x 0.03 L x 0.0003 mol
We know that 0.0003 moles of KHC8H4O4 are required to thoroughly react with the NaOH utilized in the process because there is a 1:1 ratio in play.
Finally, using the formula: we can utilize the molar mass of KHC8H4O4 (204.22 g/mol) to determine the mass of KHC8H4O4 required.
mass = moles X molar mass
mass = 0.0003 mol X 204.22 mol = 0.061 g
Therefore, 30mL of 0.01M sodium hydroxide requires 0.061 grams of potassium hydrogen phthalate to completely react.
To know more about mass, visit:
https://brainly.com/question/15959704
#SPJ1
What is the concentration of compound A if the absorbance of a solution containing compound A is 0.445? The molar absorptivity of compound A is 13.7 (M-1cm-1) and the light path of a cuvette is 1.00 cm.
The concentration of compound A is 0.0325 M.
What is Absorbance?In physics and chemistry, "absorbance" (also known as "optical density") is a measure of how much light is absorbed by a material as it passes through it. It is expressed as a logarithmic ratio of the intensity of the incident light (I0) to the intensity of the transmitted light (I), typically using the formula A = -log(I/I0). The absorbance of a material depends on its composition and the wavelength of the incident light. Absorbance is commonly used to quantify the concentration of a substance in a solution, using a spectrophotometer or other optical instrument that can measure the amount of light absorbed by the solution at a specific wavelength. The Beer-Lambert law states that there is a linear relationship between absorbance and concentration, making it a useful tool in analytical chemistry and biochemistry.
According to question:
The Beer-Lambert law relates the absorbance of a solution to the concentration of a compound and the path length of the cuvette:
A = εlc
where A is the absorbance, ε is the molar absorptivity, l is the path length, and c is the concentration.
To solve for the concentration, we can rearrange the equation:
c = A / (εl)
Substituting the given values:
c = 0.445 / (13.7 M^-1cm^-1 x 1.00 cm)
c = 0.0325 M
To know more about the Absorbance visit:
brainly.com/question/14919298
#SPJ1
What is the molar mass of iron in Daltons?
Answer:
The molar mass of iron (Fe) is approximately 55.845 g/mol or 55,845 Daltons.
Explanation:
Aɳʂɯҽɾҽԃ Ⴆყ ɠσԃKEY ꦿ
The burning of 18.0 g of carbon produces 55.0 g of carbon dioxide. What is the theoretical yield of CO2? Then, calculate the percent yield of CO2. C + O2 → CO2
Theoretically, carbon dioxide can be produced by multiplying 0.139 moles of glucose by 6 moles of carbon dioxide per mole of glucose, which results in 0.834 moles of carbon dioxide.
What yield qualifies as theoretical?The theoretical yield of a chemical reaction is the volume of a product that is produced when a limiting reactant is completely converted. Because it indicates the product amount that would result from a perfect (theoretical) chemical reaction, it is not the same as that of the quantity that would actually acquire from a reaction in the lab.
What is the theoretical formula?Calculate its molar mass of a element by the weight of the compound, then multiply the result by 100 to determine the theoretical proportion of the element in the compound. The actual yield of a product in a chemical reaction is calculated by dividing it by the theoretical yield and multiplying the result by 100.
To know more about mole visit:
https://brainly.com/question/20486415
#SPJ1
The molar absorptivity of a compound at 500 nm wavelength is 252 M*1cm 1. Suppose one prepares a solution by dissolving 0.00140
moles of a solute in enough water to make a 500.0 mL solution. What would be the absorbance in a 4.00 mm pathlength cell?
Answer:
A = 252 * 0.04 * 0.0028 = 0.275584
Therefore, the absorbance of the solution in a 4.00 mm pathlength cell is approximately 0.28.
Explanation:
Answer:
0.28
Explanation:
The formula to calculate the absorbance of a solution is given by:
A = ε * l * c
Where:
A = absorbance
ε = molar absorptivity (L/mol cm)
l = pathlength (cm)
c = concentration (mol/L)
The molar absorptivity of the solute at 500 nm is 252 M^-1cm^-1, and the concentration of the solute in the solution is 0.00140 moles in 500.0 mL, so c = 0.00140 / 0.500 = 0.0028 M.
A = ε * l * c = 252 M^-1 cm^-1 * 4.00 mm * 0.00280 M = 2.16
So, the absorbance in a 4.00 mm pathlength cell would be 2.16.
Arrange the following solutions in order by their decreasing freezing points: 0. 1 m na3po4, 0. 1 m c2h5oh, 0. 01 m co2, 0. 15 m nacl, and 0. 2 m cacl2.
The solutions can be arranged in order of decreasing freezing points as follows: 0.2 M CaCl2 > 0.15 M NaCl > 0.1 M Na3PO4 > 0.1 M C2H5OH > 0.01 M CO2
The freezing point of a solution is lowered by the presence of solute particles, and the degree of lowering is proportional to the concentration of the solute.
Based on the given concentrations, we can arrange the solutions in order of decreasing freezing points as follows:
0.2 M CaCl2: This solution has the highest concentration of solute particles, and therefore the lowest freezing point. Calcium chloride dissociates into three ions in solution, which contributes to a greater degree of freezing point depression.
0.15 M NaCl: This solution has a lower concentration of solute particles compared to CaCl2, but still has a significant effect on the freezing point of the solution.
0.1 M Na3PO4: This solution contains a polyatomic ion, which dissociates into four particles in solution, contributing to a greater degree of freezing point depression than a monatomic ion like NaCl.
0.1 M C2H5OH: This is a molecular solute that does not dissociate in solution, and therefore has a lower effect on the freezing point compared to ionic solutes.
0.01 M CO2: This is also a molecular solute, and has the lowest effect on the freezing point due to its low concentration.
In summary, the solutions can be arranged in order of decreasing freezing points as follows: 0.2 M CaCl2 > 0.15 M NaCl > 0.1 M Na3PO4 > 0.1 M C2H5OH > 0.01 M CO2.
Find more about Freezing points
brainly.com/question/26499591
#SPJ4
One method for reclaiming silver metal from silver chloride results in a 94.6% yield. Calculate the actual mass of silver that can be produced in this reaction if 100.0 g of silver chloride is converted to silver metal. 2AgCl(s) → 2Ag(s) + Cl2(g)
If 100.0 g of silver chloride is converted, the amount of silver metal that would be produced would be 94.6 g.
What is mass?Mass is described as the quantitative measure of inertia which is a fundamental property of all matter.
The reaction formula ]provided is already balanced, therefore the molar ratio of silver chloride to silver metal is 1:1.
Therefore, if 100.0 g of silver chloride is converted, we can expect to produce 100.0 g of silver metal but the yield of the reaction is only 94.6%, which means that only 94.6 g of silver metal would actually be produced.
We can calculated as follows:
100.0 g × 0.946 = 94.6 g
Learn more about mass at: https://brainly.com/question/19385703
#SPJ1
If the earth is 1.50X108 Km from the sun, what is the distance
in Gm?
Answer:
1.50 Gm
Explanation:
The distance from the Earth to the Sun can be converted from kilometers to gigameters (Gm) by dividing by 10^9:
1.50 x 10^8 km / 10^9 = 1.50 Gm
So, the distance from the Earth to the Sun is 1.50 Gm.
ALLEN
Consider the chemical equation in equilibrium.
2H₂(g) + O₂(g) → 2H₂O(g)
What will happen if the pressure of the system is increased?
If the system's pressure is increased, the equilibrium will shift in the direction that decreases the total number of gas molecules in the system.
How does changing pressure affect the equilibrium?The effect of changing pressure on an equilibrium depends on the reaction's stoichiometry and the total number of moles of gas present in the system. For example, if the reaction produced more gas molecules on the product side, an increase in pressure would shift the equilibrium to the left, in the direction of the reactants.
What is stoichiometry?Stoichiometry is a branch of chemistry that deals with calculating the quantities of reactants and products involved in a chemical reaction. In any chemical reaction, the reactants combine to form products according to a specific chemical equation that shows the reaction's stoichiometry.
To learn more about stoichiometry, visit here:
https://brainly.com/question/29019892
#SPJ1
10. What is lost in an atom as a result of radioactive decay? What equation relates this loss to
energy produced? (1 pt)
Mass that is number of protons and neutrons is lost in an atom as a result of radioactive decay.
What is an atom?
An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Learn more about atom,here:
https://brainly.com/question/13981855
#SPJ1
The following are the conjugate bases of some strong and weak acids. Which of these would you expect to act as a base if placed in aqueous solution? (1) HCOO (ii) HCO3 (iii) HSO4 (iv) H2PO4 (v) Br" (vi) F a.(i),(ii),(iv), and (vi) onlyb. (i),(ii),(iii),(iv), and (vi) onlyc. (iii) onlyd. (i),(ii),(iii),(iv) onlye. all of them
Due to the strength of their conjugate acids, I would anticipate that I (ii), (iv), and (vi) would behave as bases if put in an aqueous solution. As both alternatives (a) and (d) contain the conjugate bases of weak acids, they are both accurate.
Strong acids' conjugate bases, such as (v) Br- and (vi) F-, cannot take any more protons since they are already fully deprotonated and cannot function as bases in aqueous solutions. Strong acids have conjugate bases that may receive protons and function as bases in aqueous solutions. These bases include I HCOO-, (ii) HCO3-, (iii) HSO4-, and (iv) H2PO4-. As both alternatives (a) and (d) contain the conjugate bases of weak acids, they are both accurate. Because (v) and (vi), which are conjugate bases of strong acids and cannot function as bases, are included in Option (b), it is wrong. Option (c) is untrue because it only accounts for the conjugate bases of strong acids and ignores those of weak acids.
learn more about acids here:
https://brainly.com/question/14072179
#SPJ4
5. There are two types of bond cleavage: homolytic and heterolytic. In homolytic cleavage,
the two electrons in the bond are divided equally between the products. In heterolytic
cleavage, one atom gets both of the shared electrons. Show how the electrons in the
C-X bond in the compound L below are distributed in the bond cleavage to form:
a) Free radical
b) Carbocation
c) Carbanion
[6 marks]
C-X bond in the compound L below are distributed in the bond cleavage to form free radical.
How do bonds break?
When a bond is broken through heterolytic cleavage, also known as heterolysis, one of the fragments still has the shared pair of electrons from the original connection. Because it has both bonding electrons, one fragment acquires an electron while the other loses one. Another name for this procedure is ionic fission.
Any molecular species that has an unpaired electron in an atomic orbital and is capable of independent existence is referred to as a free radical. Most radicals exhibit certain similar characteristics when an unpaired electron is present. Many radicals are highly reactive and inherently unstable.
To learn more about free radical use:
https://brainly.com/question/13046867
#SPJ1
Which coefficients correctly balance the equation below
KOH+BaCI- -> KCI + Ba(OH)2
2,2,2,1
1,2,1,2
2,1,2,1
2,2,2,1
The coefficients that correctly balance the equation below would be 2,1,2,1. The third option.
Balancing chemical equationsA balanced chemical equation will have an equal number of different atoms in the reactants and in the products, irrespective of whether there is a change of form or otherwise.
Thus, the balanced equation of the reaction whose equation is shown would be: [tex]2KOH+BaCI_2- - > 2KCI + Ba(OH)_2[/tex]
In other words, the coefficients of the correctly balanced equation are 2,1,2,1.
More on balancing equations can be found here: https://brainly.com/question/7522382
#SPJ1
For the reaction below, how many moles of aluminum are produced from 14 moles of
lithium?
3Li (s) + AI(NO3)3 (aq) --> 3LINO3(aq) + Al(s)
Answer:
4.67 moles of aluminum
Explanation:
For the reaction:
3Li (s) + AI(NO3)3 (aq) --> 3LiNO3(aq) + Al(s)
The number of moles of aluminum produced from 14 moles of lithium can be determined by using the mole ratio between aluminum and lithium in the balanced chemical equation. The mole ratio between aluminum and lithium in the reaction is 1:3, which means that for every 3 moles of lithium, 1 mole of aluminum is produced. Therefore, the number of moles of aluminum produced from 14 moles of lithium can be calculated as follows:
14 moles of Li / 3 moles of Li per mole of Al = 4.67 moles of Al
So, 14 moles of lithium will produce 4.67 moles of aluminum.
Only few substances can be used as natural indicators. Why?
Answer:
Only few substances can be used as natural indicators because, some natural indicators do not have chemical properties which can change the color of substances.
Explanation:
Natural indicators are obtained from natural sources such as plants. Some of the common examples of natural indicators include red cabbage, turnip skin, cherries, beetroots and more. The natural indicators will help individuals distinguish if it is a base or an acid.
The percent by mass of cobalt(II) in COSO3 is _____%.
please help.
The percentage by mass of cobalt in cobalt sulfate is 42.39%.
How to calculate percent by mass?The mass percentage of a solution equals the mass of an element in one mole of the compound divided by the molar mass of the compound, multiplied by 100.
Percent by mass = (atomic mass of element/atomic mass of compound) × 100
According to this question, cobalt sulfate is given in this question. The atomic mass of cobalt is 58.93g/mol while the atomic mass of cobalt sulfate is 138.996g/mol.
% by mass = (58.93 ÷ 138.996) × 100
% by mass = 42.39%
Learn more about percentage by mass at: https://brainly.com/question/16885872
#SPJ1
The half-life of Tl
-201 is 3.0 days. How many days will it take until the activity of the Tl
-201 in Simones body is one-fourth of the initial activity?
It will take approximately 4.39 days until the activity of the Tl-201 in Simone's body is one-fourth of the initial activity.
How does Half-Life Reaction work?The time it takes for half of a substance's radioactive nuclei to decay is known as its half-life. It is a radioactive substance is characteristic property that is used to determine a material's rate of decay. A decay curve that plots the number of radioactive atoms remaining over time can be used to determine a substance's half-life. Radiometric dating, nuclear medicine, and radiation safety all make use of half-life.
The decay of Tl-201 follows first-order kinetics. The equation for the decay of a radioactive substance is given by:
N = N0 × [tex]1/2^{t/t/2}[/tex]
where N is the amount of the substance at time t, N0 is the initial amount of the substance, t1/2 is the half-life of the substance, and t is the time that has elapsed.
We are given that the half-life of Tl-201 is 3.0 days. This means that if we start with an initial activity of A0, the activity at any time t is given by:
A = A0 * [tex]1/2^{t/3}[/tex]
We want to know how many days it will take until the activity of the Tl-201 in Simone's body is one-fourth of the initial activity. Let's call this time t₁ :
A = A 0/4
= A0 × (1/2)[tex]^{t^{1/3} }[/tex]
Dividing both sides by A0 and taking the logarithm of both sides, we get:
ln(1/4)
= - [tex]t^{1/3}[/tex] × log(2)
Solving for t₁, we get:
t₁ = (3/log(2)) × log(4)
= 4.39 days
Therefore, it will take approximately 4.39 days until the activity of the Tl-201 in Simone's body is one-fourth of the initial activity.
Learn more about Half - life :
brainly.com/question/25750315
#SPJ1
Write the balanced molecular equation, including phases, for the reaction of aqueous sodium phosphate with aqueous
iron(II) nitrate.
molecular equation:
The balanced molecular equation, including phases, for the reaction of aqueous sodium phosphate with aqueous iron(II) nitrate is given below:
molecular equation: Na₃PO₄ (aq) + 2 Fe(NO₃)₂ (aq) → 2 Fe₃(PO₄)₂ (s) + 6 NaNO₃ (aq)
What is a molecular equation?Molecular equations are a type of chemical equation that shows the chemical formulas of reactants and products without indicating the ionic behavior of the species. In other words, molecular equations do not show the dissociation of ionic compounds into their constituent ions in aqueous solutions. This type of equation is commonly used to represent reactions in solid-state or gas-phase.
The molecular equation for the reaction of aqueous sodium phosphate with aqueous iron(II) nitrate is:
Na₃PO₄ (aq) + 2 Fe(NO₃)₂ (aq) → 2 Fe₃(PO₄)₂ (s) + 6 NaNO₃ (aq)Learn more about molecular equations at: https://brainly.com/question/15960587
#SPJ1
A student sets up two reactions. Reaction 1 uses 0.210 mol/L of reactant, and Reaction 2 uses 0.510 mol/L of
reactant. How many times faster is Reaction 2 compared to Reaction 1?
The relationship between rate and reactant concentration is given by the rate equation. Here reaction 2 is 2.4289 times faster than 1.
What is rate equation?An equation which expresses the experimentally observed rate of a reaction in terms of the molar concentrations of the reactants that determine the rate of a reaction is called the rate equation.
Rate ∝ concentration
Rate = k [ concentration ]
Rate₁ / Rate₂ = k [conc]₁ / [conc]₂
= k × 0.210 / k × 0.510
= 0.4117
Rate₁ = 0.4117 × Rate₂
Rate₁ / 0.4117 = Rate₂
2.4289 × Rate₁ = Rate₂
Thus reaction 2 is 2.4289 times faster compared to reaction 1.
To know more about rate of reaction, visit;
https://brainly.com/question/30546888
#SPJ9
A liquid sample of water (density = 0.9971 g/mL) has a volume of 10.00 mL. The water is allowed to freeze to become ice (density = 0.934 g/mL). What will be the volume of the
ice cube?
what is the main function of the chloroplasts in a plant cell
Answer:
The main function of chloroplast in a plant is to prepare food for the plant, by the process of photosynthetic in the plant cell
Chloroplast contains a green pigment
Explanation:
Answer:
The main function of chloroplasts in a plant cell is to perform photosynthesis. Chloroplasts contain chlorophyll, which absorbs light energy and converts it into chemical energy through a process called the light-dependent reactions. The chemical energy is then used to produce glucose and other sugars from carbon dioxide and water in a process called the light-independent reactions or the Calvin cycle. This process provides the plant with its energy source, as well as produces oxygen as a by-product.
Explanation:
How many moles of Al2S3 are
equivalent to 605 g Al2S3?
(Al2S3 = 150.17 g/mol)
? 1 mol Al₂S3
The number of moles of Al2S3 that would be equivalent to 605 g of the compound will be 4.03 moles.
Number of moles calculationThe number of moles in a particular mass of a compound is the ratio of the mass of the compound and the molar mass of the compound.
Mole = mass/molar mass
Molar mass of Al2S3 = 150.17
Mole of 605 g Al2S3 = 605/150.17
= 4.03 moles
In other words, the number of moles of 605 g Al2S3 is 4.03 moles.
More on the number of moles can be found here: https://brainly.com/question/12513822
#SPJ1
Imagine the following reaction of acetic acid with water is at equilibrium at 25 °C. (This reaction is
exothermic at this temperature.) It is then disturbed in one of the ways described below and allowed
to return to equilibrium. Select ALL correct answers for each of the multiple-choice questions below.
Some questions have more than one correct answer - check ALL of the correct answers.
3+2⇌3+ +3−
A.When strong acid is added,the concentration of hydronium ion immediately increases and after equilibrium ,the concentration of acetic acid will be higher than before disturbance. Therefore, option A and D are correct.
What is an acid ?A chemical that gives off hydrogen ions in water and forms salts by combining with certain metals are called as an acid.
B) The concentration of hydronium ion immediately decreases and after equilibrium ,the concentration of acetic acid will be lower than before the disturbance.
As when strong base is added ,the hydronium ions from acetic acid reacts with base and therefore, their concentration decreases ,also after equilibrium ,the concentration of acetic acid will be lower than before the disturbance by following Le Chatelier's principle
C)When the temperature is decreased the reaction will move in forward direction as it is an exothermic reaction and so after equilibrium ,the concentration of acetic acid will be lower than before.
D) Sodium acetate is a basic salt and when it is added to the solution,it will dissociate to formed acetate ions and sodium ions and by the common ion effect ,After equilibrium ,the concentration of acetic acid will be higher than before the disturbance.
Thus, When strong acid is added, it has a greater tendency to dissociate, and thus the concentration of hydronium ion increases immediately according to Le Chatelier's principle.
Also, as the concentration of strong acid increases after equilibrium, the concentration of acetic acid increases.
To learn more about an acid, follow the link;
https://brainly.com/question/14072179
#SPJ9
See question in the picture below , will give brainliest for correct answer
The balanced equation for the chemical reaction is:
NH₄NO₃ -> N₂O + 2H₂O
How do I balance the chemical equation?The balancing chemical equation is done by doing a head count of the different element present on both sides of the equation to ensure the are the equal.
This however is in line with the law of conservation of matter which states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to another.
Now, we shall the balance equation as shown below:
NH₄NO₃ -> N₂O + H₂O
There are 4 atoms of H on the left side and 2 on the right side. It can be balanecd by writing 2 before H₂O as shown below:
NH₄NO₃ -> N₂O + 2H₂O
Now the equationis balanced.
Learn more about balancing equation:
https://brainly.com/question/12192253
#SPJ1
How many moles in 2.6 grams of Argon?
0.065 moles are there in 2.6 grams of Argon.
What is moles?
Moles, in chemistry, are a measure of the amount of a substance. One mole is equal to 6.022 x 10^23 particles or molecules of that substance. This number is known as Avogadro's number. Moles are used to measure the amount of a substance because it is easier to work with than counting individual particles or molecules. For example, it is easier to work with the number of moles of a substance than to count the individual atoms, molecules, or ions.
No. of moles =given mass/molar mass
Or,
n=w/m ______ (1)
So in this question we are given the value of w= 2.6 g
Now, the molar mass of argon is 39.948 g/mol
m=39.948 g/mol
So, substituting these values in equation (1) we get,
n= 2.6/ 39.948 = 0.065 mol
Therefore, 0.065 moles are in 2.6 grams of Argon.
To learn more about moles from the link
https://brainly.com/question/26416088
#SPJ1
Pls answer asap 100 points
For the oxidation of glucose (C6H12O6 + 6O2→6H2O + 6CO2), how many liters of carbon dioxide gas(CO2) will be produced when 950 g of glucose(C6H12O6) is oxidized completely?
Molar Masses:
C6H12O6 = 180.2 g/mol
Question 3 options:
709g
571g
960g
480g
How many moles are contained in 0.159 grams of aluminum sulfate, Al2(SO4)3?
0.159 grams of aluminum sulfate contains 0.000465 moles.
How to determine the number of moles of aluminum sulfate (Al2(SO4)3) in 0.159 gramsFirst we need to first calculate the molar mass of Al2(SO4)3.
Molar mass of Al2(SO4)3 = (2 x atomic mass of Al) + (3 x atomic mass of S) + (12 x atomic mass of O)
= (2 x 26.98 g/mol) + (3 x 32.06 g/mol) + (12 x 16.00 g/mol)
= 342.15 g/mol
Now, we can use the following formula to calculate the number of moles:
number of moles = mass / molar mass
Plugging in the values, we get:
number of moles = 0.159 g / 342.15 g/mol
number of moles = 0.000465 moles
Therefore, 0.159 grams of aluminum sulfate contains 0.000465 moles.
Learn more about molar mass here : brainly.com/question/22503632
#SPJ1
state and explain Five causes of accidents in science laboratory
Explanation:
Chemical hazards: Handling toxic substances can cause irritation and carcinogenicity.
Biological hazards: Biological hazards include hazards from working with small animals, working with bloodborne pathogens and working with biological agents, such as viruses and bacteria.
Physical hazards: Physical hazards include exposure to noise, poor posture and the explosibility and flammability of substances.
Safety hazards: Safety hazards include unbalanced centrifuges, danger when handling hot sterilized items and electrical hazards, such as shock, explosions, blasts and electrocutions.
Allergy hazards: A common allergy hazard in the laboratory setting is a latex allergy, as many of the materials used in a laboratory setting are latex.
Dangers in the laboratory setting can also come from unsafe practices, including:
Working alone in the laboratory
Neglecting to wear a lab coat
Lack of safety training
Would aluminum be a positive or a negative charge if it just lost one valance electron?
An aluminium atom will be positive if it just lost one valence electron.
What is an ion?Ion is an atom or group of atoms bearing an electrical charge, such as the sodium and chlorine atoms in a salt solution.
An ion is formed when an atom loses or gains electrons. Ions are formed by the addition of electrons to, or the removal of electrons from, neutral atoms or molecules or other ions.
According to this question, an aluminium atom is neutrally charged i.e. 0. However, when it loses an electron, it becomes positively charged.
Learn more about ion and atoms at: https://brainly.com/question/2465718
#SPJ1
Which of the following conditions indicate an acidic solution at 25 °C? Select all that apply.
pOH = 9.66
pH = 4.25
[H+] > 1.0 x 10-7 M
[H+] > [OH-]
[OH-] > [H+]
[H+] > [OH-] of the following conditions indicate an acidic solution at 25 °C among the rest options.
Option C is correct.
What exactly is acidic solution?A solution with a pH of less than 7 is said to be acidic. A solution's acidity or basicity is measured on the pH scale, which ranges from 0 to 14. Solutions with a pH of 7 or higher are basic or alkaline, while solutions with a pH lower than 7 are acidic.
The presence of more hydrogen ions (H+) than hydroxide ions (OH-) in an acidic solution is a sign of its acidity. The degree to which an acid contributes hydrogen ions to a solution determines its strength. Acids are substances that do this.
Lemon juice, vinegar, and stomach acid are all common examples of solutions that are acidic. Acids can corrode metals and other materials and have a sour taste.
At 25°C, the following conditions indicate an acidic solution:
The condition pOH = 9.66 indicates a basic solution, and [OH-] > [H+] also indicates a basic solution.
pH = 4.25 [H+] > 1.0 x 10⁻⁷ M [H+] > [OH-]
Learn more about acidic solution:
brainly.com/question/172153
#SPJ1
Aluminum bromide and chlorine gas react to form aluminum chloride and bromine gas.
The balanced equation is : Aluminum bromide and chlorine gas react to form aluminum chloride and bromine gas.
AlBr₃ + 3Cl ---> AlCl₃ + 3Br
The Aluminum bromide and chlorine gas will react to form the aluminum chloride and the bromine gas
AlBr₃ + Cl ---> AlCl₃ + Br
reactant product
Al 1 1
Br 3 1
Cl 1 3
The chemical equation is said to be the balanced equation if the atoms of the reactants side is equals to the atoms of the product side. Multiplying the 3 in Cl and the 3 in the Br. The equation is as follows :
AlBr₃ + 3Cl ---> AlCl₃ + 3Br
To learn more about aluminum bromide here
https://brainly.com/question/20724353
#SPJ4
This question is incomplete, the complete question is :
Balance the chemical equation : Aluminum bromide and chlorine gas react to form aluminum chloride and bromine gas.
