determine the maximum wind velocity of a 45 cross wind if the maximum corsswind compenet for the airplane is 25 knots

Answers

Answer 1

The maximum wind velocity of a 45 degree cross wind for an airplane with a maximum crosswind compensation of 25 knots is 25 knots.

What is velocity?

Velocity is a physical quantity that measures both the speed and direction of an object. It is a vector quantity, meaning it has both a magnitude and a direction. Velocity is typically represented as a change in position over a given amount of time, usually expressed in meters per second (m/s). Velocity can be calculated by dividing the change in position by the change in time. Velocity is an important concept in physics and is used to describe the motion of objects in a variety of different scenarios.

This is because the maximum crosswind compensation for the airplane limits the maximum wind velocity of the cross wind. Therefore, if the cross wind has a 45 degree angle, the maximum wind velocity of the cross wind would be 25 knots.


To learn more about velocity
https://brainly.com/question/80295
#SPJ4


Related Questions

A person holding a GDL license must take training classes if this happens?

Answers

In many jurisdictions, a person holding a Graduated Driver's License (GDL) is required to take training classes if certain events occur.

These events may include traffic violations, accidents, or other incidents that demonstrate a need for further education or training. The specific requirements and consequences of failing to complete these classes vary depending on the jurisdiction and the severity of the situation.

In some cases, failure to complete required training classes can result in the revocation or suspension of the GDL license, which can significantly impact a person's ability to drive legally and safely. It is important for individuals with a GDL license to understand the specific requirements in their jurisdiction and to take steps to meet those requirements if necessary.

Taking training classes can not only help GDL holders meet legal requirements but can also improve their driving skills and reduce the risk of future accidents or violations. It is always recommended to take advantage of any available training opportunities to become a safer and more responsible driver.

To know more about Graduated Driver's License click here:

https://brainly.com/question/14312700

#SPJ11

through how many volts of potential difference must an electron be accelerated to achieve a wavelength of 0.27 nm?

Answers

Answer: 1120673.9 volts

Explanation:

The de Broglie wavelength of an electron is given by the equation λ = h / (mv), where h is the Planck constant, m is the mass of the electron, and v is its velocity.

The kinetic energy of an electron can be calculated from the potential difference it is accelerated through, using the equation KE = qV, where q is the charge of the electron and V is the potential difference.

Setting these two equations equal to each other, we get λ = h / (mv) = h / √(2mKE).

Solving for V, we get V = KE / q = (h^2 / 2mq) / λ^2.

Substituting the given values, we get V = (6.626 x 10^-34 J.s)^2 / (2 x 9.109 x 10^-31 kg x 1.602 x 10^-19 C x (0.27 x 10^-9 m)^2)

Thus, V = 1120673.9 volts (approx).

Which two materials form igneous rocks upon cooling?.

Answers

The two materials that form igneous rocks upon cooling are magma and lava.

Igneous rocks are formed when molten material from the Earth's mantle or crust cools and solidifies. Magma is molten material found beneath the Earth's surface, while lava is molten material that has erupted from a volcano and reached the surface. As these materials cool, they crystallize and form various types of igneous rocks, such as basalt, granite, and obsidian.

Igneous rocks are formed from the cooling and solidification of magma and lava, which are the primary materials responsible for their formation.

To know more about  igneous rocks, visit:

https://brainly.com/question/23555197

#SPJ11

A free particle of momentum p 0
â
moving in one dimension is represented by a plane wave. A measuring apparatus determines that the particle lies inside a region of width D centered at x=0. The resulting interaction with the particle is assumed to leave the wave function unchanged for a width D, centered at x=0 but to reduce it to zero outside this region. In other words after the measurement the wave function is assumed to be zero for â£xâ£>D/2. What are the average momentum and the average kinetic energy of the particle after the measurement has been made? (Hint: the results of HW set 4, problem 3 ) may be useful.)

Answers

The average momentum of the particle after the measurement has been made is the same as before the measurement was made, namely p0. This is because the wave function is unchanged for a width D centered at x=0.

What is average momentum?

Average momentum is the average of the momentum of all of the particles in a system. It is a measure of the total momentum in a given system and is calculated by taking the sum of the individual momentums of all the particles in the system and dividing it by the total number of particles. Average momentum is a vector quantity, meaning it has both magnitude and direction. It is often used in physics to describe the motion of a system of particles.

The average kinetic energy of the particle after the measurement has been made is given by the equation E = (p0²)/2m, where m is the mass of the particle. This is because the wave function is proportional to the momentum and therefore the kinetic energy is proportional to the square of the momentum.

To learn more about average momentum
https://brainly.com/question/30247376
#SPJ4

find the self-inductance of a 1800-turn solenoid 51 cm long and 4.0 cm in diameter. express your answer with the appropriate units.

Answers

The number of turns, [tex]\mu_0[/tex] is the permeability of free space, l is the length of the solenoid, and R is its radius. L = 0.0011 H (Henries)

What is solenoid?

A solenoid is an electrical device consisting of a coil of wire wrapped around a hollow, cylindrical core. When an electric current is passed through the coil, a magnetic field is created that can be used to generate a force or move an object. The magnetic field of the solenoid is concentrated and localized, allowing it to be used for precise movements and controllable forces.

The self-inductance of a solenoid can be calculated using the formula

[tex]L = (N^2 * \mu_0 * l)/(R^2),[/tex]

where N is the number of turns, [tex]\mu_0[/tex] is the permeability of free space, l is the length of the solenoid, and R is its radius.

Plugging in the given values, we have:

[tex]L = (1800^2 * 4\pi*10^-7 * 0.51)/(0.02^2)[/tex]
L = 0.0011 H (Henries).

To learn more about solenoid
https://brainly.com/question/1873362
#SPJ4

5) At what, if any, temperature are the numerical readings on the Fahrenheit and Celsius scales the same?
A) -30°
B) -40°
C) -50°
D) -60°
E) They can never read the same because they are based on different zeroes.

Answers

They can never read the same because they are based on different zeroes on the Fahrenheit and Celsius scales the same.

What is Fahrenheit?

Fahrenheit (°F) is a temperature scale used in the United States and a few other countries. It is named after the German physicist Daniel Gabriel Fahrenheit (1686–1736), who proposed it in 1724. On the Fahrenheit scale, the freezing point of water is 32 degrees, and the boiling point is 212 degrees. The scale is defined with the freezing point of water being 32 degrees and the boiling point of water being 212 degrees.

The Fahrenheit and Celsius scales both measure temperature, but they use different zeroes. The Fahrenheit scale uses a zero of 32°F for the freezing point of water and 212°F for the boiling point of water, while the Celsius scale uses a zero of 0°C for the freezing point of water and 100°C for the boiling point of water. This means that the numerical readings on the two scales will never be the same, no matter what temperature is being measured.

To learn more about Fahrenheit
https://brainly.com/question/30403835
#SPJ4

A duck flying south for the winter has a velocity of 10.0 m/s. if the duck is flying against a gust of northerly wind with a velocity of 2.5 m/s, what is the resultant velocity of the duck? [Consider north to be positive]

Answers

To find the resultant velocity of the duck flying south against a northerly wind, we need to consider both the duck's velocity and the wind's velocity. Since the duck is flying south (opposite of the positive direction), its velocity will be -10.0 m/s. The northerly wind has a velocity of 2.5 m/s (positive direction).

To find the resultant velocity, we simply add the two velocities together:
Resultant velocity = (-10.0 m/s) + (2.5 m/s) = -7.5 m/s

The negative sign indicates that the duck's resultant velocity is in the southward direction, and the magnitude of this velocity is 7.5 m/s. So, the duck is flying south with a resultant velocity of 7.5 m/s against the northerly wind.

you know more about the duck flying pls visit-

https://brainly.com/question/29754444

#SPJ11

Write an equation in slope-intercept form of the line with the given parametric equations.

Answers

The equation of a line in slope-intercept form from its parametric equations, we need to eliminate the parameter by solving for it in one equation and substituting it into the other equation. The resulting equation will have the slope and y-intercept of the line.

To write the equation of the line in slope-intercept form from its parametric equations, we need to eliminate the parameter. Let's say the parametric equations are:
x = at + b
y = ct + d
where a, b, c, and d are constants. To eliminate t, we can solve for t in one of the equations and substitute it into the other equation. Let's solve for t in the first equation:
t = (x - b) / a
Now substitute this expression for t in the second equation:
y = c((x - b) / a) + d
Simplifying this equation gives:
y = (c/a)x - (cb/a) + d
This is the equation of the line in slope-intercept form, where the slope is c/a and the y-intercept is -cb/a + d.
In conclusion, to write the equation of a line in slope-intercept form from its parametric equations, we need to eliminate the parameter by solving for it in one equation and substituting it into the other equation. The resulting equation will have the slope and y-intercept of the line.

To know more about slope visit :

https://brainly.com/question/29140119

#SPJ11

a battery works because it group of answer choices pumps positive charge from its negative terminal to its positive terminal. creates positive charge. creates negative charge. pumps positive charge from its positive terminal to its negative terminal. it depends on the type of battery.

Answers

A battery is a device that converts chemical energy into electrical energy, which can then be used to power various electronic devices. The battery consists of two terminals, the positive and negative terminals, which are connected to the two electrodes in the battery.

The positive terminal is where the electrons leave the battery, while the negative terminal is where they enter.

When the battery is connected to a circuit, the chemical reactions inside the battery produce a flow of electrons from the negative to the positive terminal. This flow of electrons creates a potential difference between the two terminals, which can then be used to power the circuit. Therefore, it is incorrect to say that a battery pumps positive charge from its negative terminal to its positive terminal or vice versa. Rather, it produces a flow of electrons from the negative terminal to the positive terminal.

Different types of batteries work in different ways, but the fundamental principle remains the same. The key to the battery's operation is the chemical reaction that occurs inside it, which produces the flow of electrons between the terminals.

To know more about  battery  visit:

brainly.com/question/29605565

#SPJ11

70) At what temperature is the rms speed of hydrogen molecules, H2, which have a molecular weight of 2.02 g/mole, equal to 2.0 km/s? The Boltzmann constant is 1.38 × 10-23 J/K and NA = 6.022 × 1023 molecules/mol.
A) 17°C
B) 34°C
C) 51°C
D) 68°C
E) 72°C

Answers

The temperature at which the rms speed of hydrogen molecules is 2.0 km/s is approximately 51°C (324 K). Answer: C.

What is Temperature?

Temperature is a physical quantity that expresses the degree of hotness or coldness of a substance, usually measured on a scale such as Celsius or Fahrenheit. It is a measure of the average kinetic energy of the particles in a system. At higher temperatures, the particles have greater kinetic energy and move faster, while at lower temperatures they move more slowly.

We can use the formula for root mean square speed of gas molecules:

v(rms) = sqrt(3kT/m)

where k is the Boltzmann constant, T is the temperature in Kelvin, and m is the mass of the molecule.

Rearranging the equation to solve for temperature, we get:

m = 2.02 g/mol = 2.02 x [tex]10^{-3}[/tex] kg/mol

v(rms) = 2.0 km/s = 2.0 x [tex]10^{3}[/tex] m/s

k = 1.38 x [tex]10^{23}[/tex] J/K

T = (2.02 x [tex]10^{-3}[/tex] kg/mol * (2.0 x [tex]10^{3}[/tex]m/s)^2)/(3 * 1.38 x [tex]10^{-23}[/tex] J/K)

T = 51.3 K

Learn more about Temperature from the given link

https://brainly.com/question/26866637

#SPJ4

78) A Carnot air conditioner has a coefficient of performance of 17.0 and removes 72.0 MJ of heat from the interior of a house every hour. How much power does it consume?
A) 1180 W
B) 1320 W
C) 520 kW
D) 3.14 MW
E) 1.25 MW

Answers

The power consumption of a Carnot air conditioner with a coefficient of performance of 17.0 and removing 72.0 MJ of heat per hour can be calculated as P = Q/(COP), where P is power, Q is heat removed, and COP is coefficient of performance. Therefore, P = 72.0 MJ/17.0 = 4.24 MW.

To understand this calculation, it is important to know that the coefficient of performance (COP) is the ratio of heat removed to work done. In this case, the COP is 17.0, meaning that for every unit of work done, the air conditioner removes 17 units of heat. Using this ratio, we can calculate the power consumption required to achieve a given amount of heat removal.

Learn more about power consumption here;

https://brainly.com/question/22103646

#SPJ11

What could have caused the planets to migrate through the solar system?.

Answers

Answer:

Explanation:

The orbit of a planet can change due to gravitational encounters with a large number of planetesimals.

A 20 kg cart is pushed with a force of 40 N while it encounters a frictional force of 20 N. What is the cart's acceleration?A. 4 m/s2 B. 1 m/s2 C. 0 m/s2 D. 5 m/s2

Answers

The acceleration of the cart is 1 m/s^2.

According to Newton's second law of motion, the net force acting on an object is directly proportional to its acceleration, and the equation that represents this is F = ma, where F is the net force, m is the mass of the object, and a is the acceleration. In this problem, the cart has a mass of 20 kg, and it is being pushed with a force of 40 N, but it also encounters a frictional force of 20 N. Therefore, the net force acting on the cart can be calculated by subtracting the frictional force from the pushing force, which is 40 N - 20 N = 20 N. Using the equation F = ma, we can plug in the values for the net force and mass to find the acceleration, which is a = F/m = 20 N / 20 kg = 1 m/s^2. Therefore, the answer is B, 1 m/s^2. This means that for every second the cart is pushed, its speed increases by 1 meter per second.

To learn more about acceleration, click here:
https://brainly.com/question/12550364

#SPJ11

the temperature coefficient of resistivity of platinum is 3.9x10^-3/degrees celsius. if a platinum wire has a resistance of r at room temperature (23 degrees celsius), to whattemperature must it be heated in order to double its resistance to 2r?

Answers

To double the resistance of a platinum wire from r to 2r, the temperature must be increased by a total of 86.2°C.

This is because the temperature coefficient of resistivity of platinum is 3.9x10^-3/°C, meaning that for every 1°C increase in temperature, the resistance of the wire increases by 3.9x10^-3. Therefore, for a total increase of 86.2°C, the resistance of the platinum wire will double from r to 2r. It is important to note that this value is a relative increase from the room temperature of 23°C, meaning that the final temperature must be 109.2°C in order for the resistance to double.

The temperature coefficient of resistivity of platinum is 3.9x10^-3/degrees celsius. if a platinum wire has a resistance of r at room temperature (23 degrees celsius), to what temperature must it be heated in order to double its resistance to 2r is  86.2°C.

Know more about resistance here

https://brainly.com/question/29427458#

#SPJ11

A solid plank with a uniform distribution of mass along its length rests on a platform with one end of the plank protruding over the edge. How far out can we push the plank before it tips? Explain.
a. Only about a third of the plank can hang over the edge before this mass results in a net torque.
b. None of the plank can protrude over the edge without resulting in a net torque.
c. About two-thirds of the plank can protrude over the edge without resulting in a net torque.
d. The plank can be pushed to its center point where the center of gravity is located without resulting in a net torque.

Answers

About two-thirds of the plank can protrude over the edge without resulting in a net torque. The correct answer is c.

The plank is resting on a platform with one end protruding over the edge. The mass of the plank is distributed uniformly along its length. Therefore, the center of gravity of the plank is located at the midpoint of the plank.

At some point, the force exerted on the end of the plank is greater than the weight of the mass that is displaced from the center of gravity of the plank, and the plank will start to tip over. The point at which this occurs is determined by the distribution of mass along the length of the plank and the geometry of the platform.

We can calculate the maximum distance that the plank can protrude over the edge before it tips by considering the center of gravity of the plank. When the center of gravity of the plank is located at the midpoint of the plank, the maximum distance that the plank can protrude over the edge is equal to the length of the plank. The correct answer is c.

Learn more about net torque Visit: brainly.com/question/30338139

#SPJ4

Choose the experimental facts that confirm that photons possess wave-like properties. Please check all that apply! Check all that apply.
Doppler effect
The photoelectric effect
Single slit experiment
Compton scattering
Double slit experiment
The blackbody radiation spectrum

Answers

Answer: The experimental facts that confirm that photons possess wave-like properties are:

Single slit experimentDouble slit experimentThe blackbody radiation spectrum

Therefore, you should check the following options:

Single slit experimentDouble slit experimentThe blackbody radiation spectrum

A 110 g ball moving to the right at 4. 3 m/s catches up and collides with a 450 g ball that is moving to the right at 1. 2 m/s. If the collision is perfectly elastic, what is the speed

Answers

A 110 g ball moving to the right at 4.3 m/s catches up and collides with a 450 g ball that is moving to the right at 1.2 m/s. If the collision is perfectly elastic, then speed of the 110 g ball after the collision is 5.55 m/s to the right.

In an elastic collision, both momentum and kinetic energy are conserved.

Let's define the positive direction to be to the right.

Before the collision, the momentum of the system is

p = m1v1 + m2v2

p = (0.11 kg)(4.3 m/s) + (0.45 kg)(1.2 m/s)

p = 0.473 kg⋅m/s

After the collision, the momentum of the system is still to the right, and is given by

p' = m1v1' + m2v2'

Where v1' and v2' are the final velocities of the two balls.

Since the collision is elastic, kinetic energy is conserved as well, so we can write

(1/2)m1[tex]v1^{2}[/tex] + (1/2)m2[tex]v2^{2}[/tex] = (1/2)m1[tex]v1'^{2}[/tex] + (1/2)m2[tex]v2'^{2}[/tex]

Substituting the given masses and initial velocities, we get and Solving for v1', we get

v1' = 5.55 m/s

Therefore, the speed of the 110 g ball after the collision is 5.55 m/s to the right.

To know more about elastic collision here

https://brainly.com/question/2321300

#SPJ4

8) Nitrogen boils at -196°C. What is the corresponding temperature in the Fahrenheit scale?
A) -315°F
B) -196°F
C) -346°F
D) -290°F
E) -321°F

Answers

According to the question the corresponding temperature in the Fahrenheit scale -346°F.

What is Fahrenheit?

Fahrenheit is a temperature scale that was developed by the German physicist Daniel Gabriel Fahrenheit in the early 18th century. Fahrenheit is the most widely used temperature scale in the United States, with temperatures being measured in degrees Fahrenheit (°F). In Fahrenheit, the freezing point of water is 32°F and the boiling point is 212°F.

To convert a temperature from Celsius to Fahrenheit, use the equation F = (C × 9/5) + 32.
In this case, we can plug in -196°C for C and solve for F: F = (-196 × 9/5) + 32 = -346°F.

To learn more about Fahrenheit
https://brainly.com/question/30403835
#SPJ4

Does this graph show a function? Explain how you know.
-5
5
-5
5
A. Yes; there are no y-values that have more than one x-value.
B. Yes; the graph passes the vertical line test.
C. No; the graph.fails the vertical line test.
D. No, there are y-values that have more than one x-value.

Answers

No; the graph fails the vertical line test.

option C.

What is the vertical line test?

The vertical line test is a graphical method used to determine if a given curve or graph represents a function.

It involves drawing a vertical line anywhere on the graph and observing whether the line intersects the curve at more than one point.

If a vertical line intersects the curve at only one point for all possible values of x, then the graph represents a function.

On the other hand, if a vertical line intersects the curve at more than one point for any value of x, then the graph does not represent a function.

So when we draw a single straight vertical line through the circular curve, it intersects at two points, so it does not show a function.

Learn more about the vertical line test here:

brainly.com/question/1821791

#SPJ1

which one of the following types of electromagnetic wave travels through space the fastest? which one of the following types of electromagnetic wave travels through space the fastest? microwaves infrared ultraviolet radio waves they all travel through space at the same speed.

Answers

They all travel through space at the same speed. The speed of electromagnetic waves in a vacuum (such as space) is approximately 299,792,458 meters per second, which is often referred to as the speed of light. Therefore, all types of electromagnetic waves, including microwaves, infrared, ultraviolet, and radio waves, travel at the same speed through space.Electromagnetic waves are a type of energy that consists of oscillating electric and magnetic fields that travel through space at the speed of light. They are produced by the acceleration of electric charges, such as electrons, and are characterized by their wavelength, frequency, and energy.

Electromagnetic waves can be classified based on their frequency or wavelength, and this determines their properties and uses. The electromagnetic spectrum is the range of all possible frequencies of electromagnetic waves.

The electromagnetic spectrum includes radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. Radio waves have the longest wavelength and lowest frequency, while gamma rays have the shortest wavelength and highest frequency.

Electromagnetic waves have a wide range of applications in various fields, including communication, medicine, and technology. Radio waves are used for communication, such as broadcasting and mobile communication. Infrared radiation is used in remote sensing, thermal imaging, and heating. Visible light is the only part of the electromagnetic spectrum that can be seen by the human eye and is used for illumination and imaging. X-rays and gamma rays are used in medical imaging and radiation therapy.

However, exposure to high levels of electromagnetic radiation can be harmful to living organisms, and precautions are taken to ensure safe use in applications such as medical imaging and communication.

To know more about electromagnetic waves visit:

https://brainly.com/question/29774932

#SPJ11

A 30.0 kg mass is traveling to the right with a speed of 2.80 m/s on a smooth horizontal surface when it collides with and sticks to a second 30.0 kg mass that is initially at rest but is attached to one end of a light, horizontal spring with force constant 160.0 N/m. The other end of the spring is fixed to a wall to the right of the second mass. Find the frequency of the subsequent oscillations

Answers

According to the question the frequency of the oscillations is 0.531 Hz.

What is frequency?

Frequency is a measure of how often something occurs over a given period of time. It is typically expressed as a number of occurrences per unit time, such as per second, minute, hour, day, week, month, or year. Frequency can also refer to the number of times a specific event or phenomenon is observed during a certain period of time.

Step 1: Calculate the total mass of the system:

Total mass = 30.0 kg + 30.0 kg = 60.0 kg

Step 2: Calculate the total energy of the system:

Total energy = (1/2) × m × v2 = (1/2) × 60.0 kg × (2.80 m/s)2 = 392 J

Step 3: Calculate the spring constant:

Spring constant = 160.0 N/m

Step 4: Calculate the total mass-spring system's effective spring constant:

Effective spring constant = k/m = (160.0 N/m)/(60.0 kg) = 2.67 N/m

Step 5: Calculate the frequency of the subsequent oscillations:

Frequency = (1/2π) × √(k/m) = (1/2π) × √(2.67 N/m) = 0.531 Hz

To learn more about frequency

https://brainly.com/question/254161

#SPJ4

Wave interference that results in lesser wave amplitude is called:.

Answers

The type of wave interference that results in lesser wave amplitude is called "destructive interference".

Destructive interference occurs when two waves with the same frequency and amplitude are out of phase with each other, meaning that the crest of one wave coincides with the trough of the other wave.

As a result, the positive and negative displacements of the waves cancel each other out, leading to a reduction in the overall amplitude of the resulting wave.

Destructive interference can occur in various types of waves, including sound waves, water waves, and electromagnetic waves such as light.

It is an important concept in wave physics, and is used in many applications such as noise-cancelling headphones, where destructive interference is used to cancel out unwanted sound waves.

To know more about destructive interference refer here

brainly.com/question/16098226#

#SPJ11

A railroad handcar is moving along straight, frictionless tracks with negligible air resistance. In the following cases, the car initially has a total mass (car and contents) of 170 kg and is traveling east with a velocity of magnitude 5.50 m/s . Find the final velocity of the car in each case, assuming that the handcar does not leave the tracks.
A) An object with a mass of 20.0 kg is thrown sideways out of the car with a speed of 1.90 m/srelative to the car's initial velocity.
B) An object with a mass of 20.0 kg is thrown backward out of the car with a velocity of 5.50 m/srelative to the initial motion of the car.
C) An object with a mass of 20.0 kg is thrown into the car with a velocity of 5.90 m/s relative to the ground and opposite in direction to the initial velocity of the car.

Answers

Using the principle of conservation of momentum, we calculated the final velocities of a handcar after an object was thrown out, thrown backward, and thrown into it. The final velocities were 5.32 m/s to the east, 3.97 m/s to the west, and 4.12 m/s to the west, respectively.

To solve this problem, we need to use the principle of conservation of momentum, which states that the total momentum of a system is conserved in the absence of external forces. In this case, we can treat the handcar and its contents as a system, since there are no external forces acting on it.

Let's first calculate the initial momentum of the system. The momentum is given by the product of the mass and velocity, so the initial momentum is:

[tex]p_{initial} = m_{total} \times v_{initial[/tex]

where m_total = 170 kg is the total mass of the system and [tex]v_{initial[/tex] = 5.50 m/s is the initial velocity of the car.

A) When the object is thrown sideways out of the car, there is no change in the car's velocity since the object is moving perpendicular to the direction of motion. However, the momentum of the system changes because the object is leaving with some velocity. Let's call the mass of the object [tex]m_{object[/tex]= 20 kg and its velocity relative to the car [tex]v_{object[/tex] = 1.90 m/s. The momentum of the object is:

[tex]p_{object} = m_{object} \times v_{object[/tex]

The total momentum of the system after the object is thrown out is:

[tex]p_{final} = p_{initial} - p_{object}[/tex]

since the momentum of the object is leaving in the opposite direction of the initial velocity of the car, the final velocity of the car will be slightly smaller than the initial velocity, and its direction will be unchanged. Using the conservation of momentum equation, we can solve for the final velocity of the car:

[tex]p_{final} = m_{total} * v_{final[/tex]

[tex]v_{final} = p_{final} / m_{total}[/tex]

Substituting the values we have:

[tex]$v_{final} = \frac{m_{total} \cdot v_{initial} - m_{object} \cdot v_{object}}{m_{total}} = \frac{170 \text{ kg} \cdot 5.50 \text{ m/s} - 20.0 \text{ kg} \cdot 1.90 \text{ m/s}}{170 \text{ kg}} = 5.32 \text{ m/s}$[/tex]

Therefore, the final velocity of the car is 5.32 m/s to the east.

B) When the object is thrown backward out of the car, the momentum of the system changes since the object is leaving with some velocity in the opposite direction of the car's initial velocity. Let's call the velocity of the object relative to the car [tex]v_{object[/tex]= -5.50 m/s. The momentum of the object is:

[tex]p_{object} = m_{object} \times v_{object[/tex]

The total momentum of the system after the object is thrown out is:

[tex]p_{final} = p_{initial} - p_{object[/tex]

since the momentum of the object is leaving in the opposite direction of the initial velocity of the car, the final velocity of the car will be smaller and in the opposite direction. Using the conservation of momentum equation, we can solve for the final velocity of the car:

[tex]p_{final} = m_{total} \times v_{final[/tex]

[tex]v_{final} = p_{final} / m_{total[/tex]

Substituting the values we have:

[tex]v_{final} = \frac{m_{total} \cdot v_{initial} - m_{object} \cdot v_{object}}{m_{total}} = \frac{170 \text{ kg} \cdot 5.50 \text{ m/s} - 20.0 \text{ kg} \cdot (-5.50 \text{ m/s})}{170 \text{ kg}} = 3.97 \text{ m/s}$[/tex]

Therefore, the final velocity of the car is 3.97 m/s to the west.

C) When the object is thrown into the car, the momentum of the system changes since the object is entering with some velocity in the opposite direction of the car's initial velocity. Let's call the velocity of the object relative to the ground [tex]v_{object[/tex] = -5.90 m/s. The momentum of the object is:

[tex]p_{object} = m_{object} \times v_{object[/tex]

The total momentum of the system after the object is thrown in is:

[tex]p_{final} = p_{initial} + p_{object[/tex]

since the momentum of the object is entering in the opposite direction of the initial velocity of the car, the final velocity of the car will be smaller and in the opposite direction. Using the conservation of momentum equation, we can solve for the final velocity of the car:

[tex]p_{final} = m_{total} * v_{final[/tex]

[tex]v_{final} = p_{final} / m_{total[/tex]

Substituting the values we have:

[tex]$v_{final} = \frac{m_{total} \cdot v_{initial} + m_{object} \cdot v_{object}}{m_{total}}$[/tex]

[tex]\frac{(170\,kg \cdot 5.50\,m/s + 20.0\,kg \cdot -5.90\,m/s)}{170\,kg}[/tex]

= 4.12 m/s

Therefore, the final velocity of the car is 4.12 m/s to the west.

To learn more about momentum

https://brainly.com/question/30677308

#SPJ4

could newton laws or keplers 3rd law be applied to the hot gas orbiting the nucleus of m87 to determine the mas of the central black hole

Answers

Both Newton's laws and Kepler's third law can be used to estimate the mass of the black hole in M87, and combining the information obtained from both methods has led to the discovery that the black hole is approximately 6.5 billion times the mass of the sun.

Yes, both Newton's laws and Kepler's third law can be used to determine the mass of the central black hole in M87 by analyzing the motion of the hot gas orbiting the nucleus.

Newton's laws of motion can be applied to the orbiting gas to determine the centripetal force acting on it, which is related to the gravitational force between the gas and the central black hole. This, in turn, can be used to calculate the mass of the black hole.

Kepler's third law can also be used to determine the mass of the black hole by analyzing the orbital period and distance of the gas from the black hole. The law states that the square of the orbital period is proportional to the cube of the semi-major axis of the orbit, which can be used to calculate the mass of the black hole.

By combining the information obtained from both methods, astronomers have been able to estimate the mass of the central black hole in M87 to be approximately 6.5 billion times the mass of the sun. This groundbreaking discovery was made possible by the Event Horizon Telescope, which is a network of telescopes that are able to observe black holes and their surroundings in unprecedented detail.

To learn more about black holes

https://brainly.com/question/31869219

#SPJ4

conservation of momentum: you are standing on a skateboard, initially at rest. a friend throws a very heavy ball towards you. you can either catch the object or deflect the object back towards your friend (such that it moves away from you with the same speed as it was originally thrown). what should you do in order to minimize your speed on the skateboard?

Answers

Conservation of momentum is a fundamental law in physics, which states that in a closed system, the total momentum remains constant. In the given scenario, if you catch the ball, the momentum of the system will change as you and the skateboard will start moving in the opposite direction to compensate for the momentum of the ball. On the other hand, if you deflect the ball back towards your friend, the momentum of the system will remain constant, but the direction of the momentum will change. In order to minimize your speed on the skateboard, it is recommended to deflect the ball back towards your friend. By doing so, the momentum of the system will remain constant, and the skateboard's speed will not increase. However, it is essential to ensure your safety and take precautions while performing such an experiment.
Hi there! To minimize your speed on the skateboard, you should deflect the object back towards your friend. Let me explain using conservation of momentum:

1. Initially, both you and the skateboard are at rest, so your total momentum is 0.
2. When the heavy ball is thrown towards you, it has a certain momentum (mass of ball × speed).
3. Conservation of momentum states that the total momentum before and after an interaction must be equal.

If you catch the ball, the momentum of the ball will be transferred to you, causing you and the skateboard to move at a higher speed. On the other hand, if you deflect the ball back with the same speed, the ball's momentum will be reversed in direction but maintain the same magnitude.

In this case, your final momentum will be the opposite of the ball's momentum, making the total momentum still 0. Therefore, deflecting the ball back towards your friend will minimize your speed on the skateboard.

To know more about skateboard visit

https://brainly.com/question/30552059

#SPJ11

Where is the greatest Moment of Inertia for a spinning object with changing radius?

Answers

The greatest moment of inertia for a spinning object with changing radius occurs at the furthest point from the center of rotation, where the radius is at its maximum.

What is rotation?

Rotation is a type of motion where an object or a body spins around its center or an axis. It is an essential part of the universe and can be seen in everyday life. Its properties surface in a variety of physical phenomena, including the spinning of planets, the precession of a spinning top, and the orbital motion of stars and planets. Rotation can be regular and periodic, or chaotic and random. It can also be linear or angular. In linear rotation, the object moves in a straight line around a fixed point, while in angular rotation, the object moves around a circle or an ellipse. Rotation is caused by an external force and is studied in fields such as physics, astronomy, and engineering.

To learn more about rotation

https://brainly.com/question/30698261

#SPJ4

The volume V of an ideal gas varies directly with the temperature T and inversely with the pressure P. A cylinder contains oxygen at a temperature of 310 degrees K and a pressure of 18 atmospheres in a volume of 120 liters. Find the pressure if the volume is decreased to 90 liters and the temperature is increased to 330 degrees K. Round your answer to two decimal places. The pressure is Number atmospheres. Show your work and explain, in your own words, how you arrived at your answer.

Answers

The pressure is 12.31 atmospheres when the volume is decreased to 90 liters and the temperature is increased to 330 degrees K.

What is atmospheres?

An atmosphere is a layer of gases that surround a planet or other celestial body. It is held in place by the planet's gravity and is composed of a variety of gases. Earth's atmosphere is composed mostly of nitrogen (78%) and oxygen (21%), and it is responsible for maintaining the planet's temperature and weather patterns.

V = kT/P
where k is a constant.
We can also create an equation using the given information:
120 = k(310)/18
We can solve for k by multiplying both sides by 18:
2160 = k(310)
We can solve for k by dividing both sides by 310:
k = 6.96774
We can use the equation V = kT/P to solve for P when V is 90 liters and T is 330 degrees K:
90 = 6.96774(330)/P
We can solve for P by multiplying both sides by P:
90P = 6.96774(330)
We can solve for P by dividing both sides by 6.96774(330):
P = 12.31 atmospheres
Therefore, the pressure is 12.31 atmospheres when the volume is decreased to 90 liters and the temperature is increased to 330 degrees K.

To learn more about atmospheres
https://brainly.com/question/13265242
#SPJ4

Look at the illustration of the various positions of the moon in its orbit around the earth. For each position, draw the phase of the moon as seen from earth and label the lunar phase. In the table, fill in the approximate times of moonrise and moonset for the indicated lunar phases. Explain how the times of moonrise and moonset were chosen.

Answers

The four primary moon phases and four intermediate moon phases that make up a lunar month occur at four different times, with the intermediate moon phases occurring in the intervals between the prime phases.

What are the phases of the moon?

There are eight phases of the moon.

The new moon, first quarter, full moon, and last quarter are the main phases. Waxing crescent, waxing gibbous, fading crescent, and waning gibbous are the secondary phases.

Waxing describes the increase of the Moon's image, and waning describes a decrease in that image.

Learn more about moon phases at: https://brainly.com/question/1286359

#SPJ1

If you double the mass of the block attached to a spring-block oscillator, what will happen to the frequency of the oscillation?

Answers

The frequency of an oscillator (f) is inversely proportional to the square root of the mass (m) attached to it. Mathematically, it can be represented as:

f ∝ 1/√m

This means that if you double the mass of the block attached to a spring-block oscillator, the frequency of the oscillation will decrease by a factor of √2, which is approximately 1.4. In other words, the oscillation will become slower and have a longer period. This relationship can be understood by considering that increasing the mass will increase the inertia of the system, making it harder for the spring to push and pull the mass back and forth at the same rate. Therefore, the frequency of the oscillation decreases as the mass increases.

To know more about mass please visit:

https://brainly.com/question/19694949

#SPJ11

a moth at about eye level is 11.1 cm in front of a plane mirror; you are behind the moth, 46.6 cm from the mirror. what is the distance between your eyes and the apparent position of the moth's image in the mirror?

Answers

The total distance between your eyes and the apparent position of the moth's image in the mirror is 57.7 cm. This is calculated by adding the distances from the mirror to the moth and from the mirror to your eyes.

To find the distance between your eyes and the apparent position of the moth's image in the mirror, we need to consider the individual distances involved. The moth is 11.1 cm in front of the mirror. Since plane mirrors create virtual images that appear to be the same distance behind the mirror as the object is in front of it, the moth's image will also appear 11.1 cm behind the mirror.

You are 46.6 cm behind the moth, so you are also 46.6 cm away from the mirror. To find the total distance between your eyes and the moth's image, we simply add these two distances together: 11.1 cm + 46.6 cm = 57.7 cm.

To know more about eye level visit:

https://brainly.com/question/31597596

#SPJ11

Other Questions
When will a person be given a proposed license suspension? an indicator is a substance that at a particular ph will go from:select the correct answer below:colorless to coloredcolored to colorlessone color to another colordepends on the indicator The price of a DVD rental is $2.50 and the price of a downloaded movie is $1.00. If the price of a DVD rental falls by $0.50, the relative price of a downloaded movie How would a manufacturer benefit by using fewer scarce?. karlie is planning out her future. she told her mother that she is going to graduate high school at age 18, go to college and graduate at age 22, and go to medical school and become a doctor at the age of 26 or 27. she is going to get married right after she completes her residency and have her first baby at age 30. karlie is describing her . question 8 options: a) social clock b) non-normative life events c) stage of identity versus role confusion d) stage of intimacy versus isolation which law is designed to regulate the informed use of credit?save our homeresparegulation zusa patriot act What form of poetry did Claude McKay use in "If We Must Die"? Which consequences can be caused by overusing fertilizers and pesticides for agriculture?. which of the following are characteristics of homo economicus? multiple select question. cognitively naive highly disciplined well-informed narrowly self-interested t a given instant the current and self-induced emf in an inductor are directed as indicated in fig. 30-59. (a) is the current increasing or decreasing? (b) the induced emf is 17 v, and the rate of change of the current is 25 ka/s; find the inductance. which of the following is the time immediately following an orgasm during which an individual is incapable of experiencing another orgasmA. plateauB. resolutionC. retroactive periodD. refractory period ifferences between house and senate versions of a bill are resolved . to stop or delay a bill from passing, a senator may on the senate floor.T/F consider the following theorem. theorem 9.5.1: the number of subsets of size r that can be chosen from a set of n elements is denoted n r and is given by the formula n r The presidential election of 1968 revived the political life of richard nixon. Based on the election map above, what region of the united states seemed to be the only one to support lyndon johnsons great society?. consider the market for u.s. dollars where the price of a dollar is given in terms of turkish lira. for each scenario, determine whether the dollar will appreciate or depreciate. hold everything constant except the change that is being described. a. u.s. electronics become much more popular after a new movie technology is developed. b. in 2012, inflation in turkey was 8 percent whereas inflation in the united states was 2.5 percent. c. as part of its policy to increase employment in the united states, the federal reserve cuts interest rates by 25 basis points. d. the most recent global economic report indicated that average incomes in turkey grew 5 percent whereas u.s.a. incomes grew by just 3 percent. e. turkey develops a new, more affordable method of reducing auto emissions. This material property controls spreading of light on microsurface detail: which nursing interventions would the nurse provide to an older client with hypertension? select all that apply. one, some, or all responses may be correct. What is his next guess as to why the Raven is saying "Nevermore" ? on april 30, year 1, tilton products purchased machinery for $55,000. the useful life of this machinery is estimated at 8 years, with an $5,000 residual value. tilton uses a calendar year-end for financial reporting. in year 7, tilton products sells this machinery for $4,000. at the date of sale, the machinery had been depreciated by tilton products to its estimated residual value of $5,000. this sale results in: The weights in pounds of a breed of yearling cattle follows the Normal model N(1128,62). What weight would be considered unusually low for such an animal? Select the correct choice below and fill in the answer boxes within your choice. A.Any weight more than 2 standard deviations below the mean, or less than nothing pounds, is unusually low. One would expect to see a steer 3 standard deviations below the mean, or less than nothing pounds only rarely. B.Any weight more than 3 standard deviations below the mean, or less than nothing pounds, is unusually low. One would expect to see a steer 2 standard deviations below the mean, or less than nothing pounds only rarely. C.Any weight more than 1 standard deviation below the mean, or less than nothing pounds, is unusually low. One would expect to see a steer 2 standard deviations below the mean, or less than nothing pounds only rarely.