Dimensional / Projectile motion (mass has no effect)A 200g ball is thrown up at 25 m/s at 40 degrees.a. How high will it reach? (Hint Vfy=0 at peak)b. How much time will it take to reach peak heightc. How much time will it take to fall back to the ground?(Hint: symmetrical parabola)d. How far will it fall? (Dx=Vox* tair)

Answer:

A stone is thrown up wards with an initial velocity of 25 m/s at an angle of 30 to the ground.

O-ring seal failure caused the fatal magnitude the of the An O-ring, a spherical gasket used to seal the right rocket booster, was found to be the primary culprit in the mishap.

On the Challenger, the O-ring had a circumference of 12 feet. As the igniters ignite the fuel upon launch, there seems to be high pressure on the inside of the solid rocket boosters. The parts holding the O-ring flexed slightly as a result of the pressure.

He was required to appear before an executive panel, and when he did, he informed the commission's chairman, William Rogers, that Morton Thiokol had been so worried about the Aaaaa that they had advised NASA not to launch the spacecraft in conditions that were cooler than 53 degrees.

To know more about magnitude visit :

https://brainly.com/question/28173919

#SPJ4

Average power Pavg created by the force F is 48 watts, instantaneous power P at t = 10s is 480 watts.

To find the average power created by the force F, we can use the formula:

Pavg = (Work done by the force) / (time interval)

The work done by the force F can be found using the formula:

Work = force x distance

The distance is the displacement of the sled, which can be found using the formula:

distance = (initial velocity + final velocity) / 2 * time

The sled starts from rest, so its initial velocity is 0 m/s.

We know that the acceleration of the sled is 0.08 m/s^2 and the time is 1 minute, which is 60 seconds.

So the final velocity is:

final velocity = 0 + 0.08 m/s^2 x 60s = 4.8 m/s

We know that the force F is 600 N, so the work done by the force is:

Work = F x distance = 600 N x (4.8 m/s) = 2880 J

We know that the time interval is 1 minute, which is 60 seconds.

So the average power created by the force F is:

Pavg = Work / time interval = 2880 J / 60s = 48 watts (to 3 significant figures)

To find the instantaneous power P at t = 10s, we can use the formula:

P = F x v

where v is the velocity of the sled at time t.

We can find the velocity of the sled at time t using the formula:

v = v0 + a*t

where v0 is the initial velocity (0 m/s), a is the acceleration (0.08 m/s^2) and t is the time (10s)

so we can substitute v = v0 + a*t

v = 0 + 0.08 m/s^2 x 10s = 0.8 m/s

We know that the force F is 600 N, so the instantaneous power P created by the force F at t=10s is:

P = F x v = 600 N x 0.8 m/s = 480 watts (to 3 significant figures)

To know more about average power please refer: https://brainly.com/question/14831024

#SPJ4

The time that elapses between a moment of maximum speed and the next moment of maximum acceleration is 2.43 seconds.

The time that elapses between a moment of maximum speed and the next moment of maximum acceleration is calculated as follows;

V (max) = 2πfA ------ (1)

a (max) = ( 2πf )² A ------ (2)

where;

Since both equations have amplitude, A, we will make A the subject of the formula.

A = (V.max) / ( 2πf)

A =  (a.max) / ( 2πf)²

(V.max) / ( 2πf) = (a.max) / ( 2πf)²

V.max = (a.max) / ( 2πf)

f = (a.max) / ( 2π x V.max)

Period, T, = 1 / f

T = ( 2π x V.max) / a.max

The period of the oscillation is calculated as follows;

T = ( 2π x 2.23 ) / ( 5.77 )

T = 2.43 seconds

Learn more about period of oscillation here: https://brainly.com/question/20070798

#SPJ1

Answer:

About 4.4 seconds

Explanation:

[tex]h=1/2(gt^{2} )[/tex]

[tex]t^{2} =\frac{2h}{g}[/tex]

[tex]t=\sqrt{\frac{2h}{g} }[/tex]

[tex]t=\sqrt{\frac{2(93)}{9.8} } =\sqrt{18.98} =4.36[/tex]

Hope this helps

The main justification is that pressure decreases with surface area. Rubber hoses are widely used to connect large diameter lines that carry low pressure fluids, like cooling air and engine return oil.

The total area of an object's three-dimensional exterior surfaces, or the sum of its faces, is known as surface area. The main justification is that pressure decreases with surface area. Rubber hoses are widely used to connect large diameter. Its measurement units are square. In other words, the sum of all the areas of all the shapes that cover a surface equals the surface area of the object. A circle's diameter is equal to twice its radius in length. Measuring the distance between the circle's centre and its end allows one to determine the radius.

Learn more about pressure here

https://brainly.com/question/13199169

#SPJ4

The complete questions is -

Large diameter lines carrying low pressure fluids such as engine return oil and cooling air are typically joined by a rubber hose that is slipped over the tube ends and held in place with screw type hose clamps, Why?

The volume of the semi circle in cubic centimeters  is 3.75 * 10^22 cm^3

We know that the first step that we would have to take is to be able to get the area of the semi circle and when we do that we are going to have from the values that we have in the question;

A = πr^2

A = area

r = radius

Where r = 2000km or 2 * 10^8 cm

A = 3.142 * (2 * 10^8)^2

A = 1.25 * 10^17 cm^2

Then we would have;

Volume = area * thickness

Thickness = 3000 meters or 3 * 10^5 cm

Volume = 1.25 * 10^17 cm^2 * 3 * 10^5 cm

= 3.75 * 10^22 cm^3

Learn more about volume:https://brainly.com/question/1578538

#SPJ1

The force must be raised to apply an impulse of 2J to an item, either by increasing the force's intensity or the object's mass. The right answer is Option C because it satisfies the requirement by applying a force of magnitude F to an object with mass 2m for some time t = 2T.

What does the physics term "impulse" mean?

To change the momentum of an object, you must exert a certain amount of force over a specific period. It is F times t because of this. For instance, you exert force for a brief period when you hit a ball with a cricket bat.

What is the definition of an impulse simple?

In physics, the term "impulse" is used to characterize or measure the impact of force operating gradually to alter an object's motion. It is often stated in Newton seconds or kilograms per second and is denoted by the symbol J.

To know more about impulse visit:

brainly.com/question/27134914

#SPJ4

The spring's elastic potential energy decreases and the gravitational potential energy increases.

What do you mean by potential energy?

Potential energy is the energy an object possesses because of its position or state. It is the energy an object has due to its height, position, or chemical composition. The unit of measurement for potential energy is usually Joules (J).

There are different types of potential energy, such as gravitational potential energy (GPE), elastic potential energy (EPE), and chemical potential energy.

When a mass is attached to a vertical spring, it causes the spring to stretch. As the spring stretches, it stores potential energy in the form of elastic potential energy (EPE). As the spring stretches, the potential energy stored in it increases.

At the same time, as the mass is attached to the spring and moves downward, it loses gravitational potential energy (GPE) due to the work done by gravity on the mass. Since the mass is moving downward, the gravitational force is acting in the opposite direction of the displacement, resulting in a decrease in GPE. Therefore, as the mass moves downward, the EPE of the spring increases and the GPE of the mass decreases.

Therefore, the spring's elastic potential energy decreases and the gravitational potential energy increases.

To learn more about potential energy from the given link:

https://brainly.com/question/24933254

#SPJ1

The gravitational field strength on the surface of Ganymede is equal to 1.75 × 10^11 m/s^2. This is approximately 200 times the gravitational field strength of Earth.

Gravitational field is a region of space that is affected by the gravitational force of a massive object, such as a planet or star. It is the region in which any mass inside it experiences the force of gravity, and any mass outside of it does not. Gravitational fields can be measured in units called Newtons per kilogram (N/kg). The strength of the gravitational field is proportional to the mass of the object, with more massive objects creating stronger fields. In general, gravity is the weakest of the four fundamental forces, but it still has a profound effect on the behavior of matter and energy.

The gravitational field strength on the surface of Ganymede can be determined using Newton's law of gravity. According to this law, the force of gravity between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between them. Therefore, the gravitational field strength on the surface of Ganymede is equal to the gravitational force of Jupiter divided by the square of the distance between them.

The mass of Jupiter is 1.898 × 10^27 kg and the distance between Jupiter and Ganymede is 1.07 × 10^9 meters. Therefore, the gravitational field strength on the surface of Ganymede is equal to 1.75 × 10^11 m/s^2. This is approximately 200 times the gravitational field strength of Earth.

To know more about gravitatonal field click-
https://brainly.com/question/28437652
#SPJ4

When two forces are applied in the same direction, we can use the vector addition to find the net force. The net force is found by adding the magnitudes of both forces.

In this case, the two forces are 225 N and 165 N, and they are applied in the same direction.

Therefore, the net horizontal force on the box is:

Net force = force 1 + force 2 = 225 N + 165 N = 390 N

This means that the net force acting on the box is 390 N when two horizontal forces, 225 N and 165 N, are exerted on the box in the same direction.

It would take a blue whale from one side of the Pacific Ocean to find the other at a speed of 5 mph for the 4000 miles, which is approximately 800 hours or 33 days.

The speed of the organism is determined by its body structure and how nature designed it, such as in some fast-swimming fish, which have different body designs than some slow-moving fish. Because of their speed, they can escape and flee predators.

Hence, it would take a blue whale from one side of the Pacific Ocean to find the other at a speed of 5 mph for the 4000 miles, which is approximately 800 hours or 33 days.

Find out more about the speed here.

https://brainly.com/question/22802060

#SPJ1

Heat will flow from hotter region to the colder region. When a cold piece of  metal is placed in hot water heat will flow from water to the metal.

Heat energy will transfer between regions over a temperature gradient. Heat flows from hotter regions to colder regions to balance the total heat energy.

In solids, heat transfer takes place by conduction mechanism where one hotter molecules transfers the energy to nearest molecules in the closely packed chain. In liquids and gases, heat transfers through convection.

When a cold piece of metal is paced in hot water, the heat energy from the water will flow to the colder metal. Hence, the temperature of water will reduce.

Find more on heat transfer;

https://brainly.com/question/13433948

#SPJ1

The gravitational force between any two bodies is inversely proportional to the square of the distance between them. The distance from Earth at which the force of gravity exerted by Earth on the spacecraft cancels the force exerted by the Moon on the spacecraft is 384,400 km.

Gravitational force is a natural phenomenon by which all objects with mass attract each other. This force is one of the four fundamental forces of nature, and is the weakest of the four. It is the force that binds us to the Earth and keeps our feet firmly planted on the ground.

Part A: The gravitational force between any two bodies is inversely proportional to the square of the distance between them. Therefore, the force of gravity exerted by Earth on the spacecraft will be equal to the force of gravity exerted by the Moon on the spacecraft when the distance between them is equal to the Moon's orbit semimajor axis.

Part B: The Moon's orbit semimajor axis is 384,400 km. Therefore, the distance from Earth at which the force of gravity exerted by Earth on the spacecraft cancels the force of gravity exerted by the Moon on the spacecraft is 384,400 km.

To two significant digits, the answer is 384,400 km.

To know more about gravitational force, visit

brainly.com/question/12528243

#SPJ4

Electric field (E) is directly proportional to the voltage (V) and inversely proportional to the distance (L) between the electrodes.

To learn more about electric field refer:

brainly.com/question/19385703

#SPJ4

The electric field will decrease by a factor of two when the distance is increased by a factor of 2 :  V = E×d, E = V/d.

Option A is correct

- Since altering R is not directly proportional to E in the same way that altering the distance L is, increasing L is the most efficient approach.

Electric field, an electric property that is connected to every point in space when any kind of charge is present. The electric field strength, intensity, or simply the electric field is expressed by the value of E, which indicates the magnitude and direction of the electric field.

The area of space around an electrically charged particle or object in which the charge body experiences force is known as an electric field . Examples: Charges and their configurations, such as those of capacitors and battery cells, produce electric fields.

Which of the following changes to the circuit will decrease the electric field between the electrodes by the greatest amount?

A.Increasing L by a factor of 2

B. Decreasing L by a factor of 2

C. Increasing R by a factor of 2

D. Decreasing R by a factor of 2

Learn more about electric field:

brainly.com/question/1592046

#SPJ4

Your students should be informed that the warm sector of a mid-latitude cyclone is the region situated between the leading warm front and the trailing cold front. The space behind the cold front is known as the cold-sector.

To learn more about atmospheric conditions refer to:

https://brainly.com/question/13730644

#SPJ4

The magnitude of θ such that the volume of the cone is a maximum is  56.58 degrees when a sector with central angle is cut from a circle of radius 12 inches.

Given the radius of circle (R) = 12 inches

Let the central angle (T) = θ

Volume of cone (V) = πr^2h/3

Let the slant height in cone = s

Let the height of cone = h

we know that for the cone, (r) = sT/(2π)

Then h = √(s^2 - r^2)

Therefore, V = π( sT/(2π) )^2√(s^2 - r^2)/3

To maximize V we need to find dV/dT such that dV/dT = 0

dV/dT = d/dT[π( sT/(2π) )^2√(s^2 - r^2)/3]

Let  θ = T then dV/dθ = d/dθ[π( sθ/(2π) )^2√(s^2 - r^2)/3]

(2θs^3/4π)√[(4π^2-θ^2)/(4π^2)] - (θ^3s^3)/(4π√[(4π^2-θ^2)/(4π^2)]) = 0

(2θs^3/4π)√[(4π^2-θ^2)/(4π^2)] = (θ^3s^3)/(4π√[(4π^2-θ^2)/(4π^2)])

θ^2 = 4π^2/(4π^2+1)

θ = 56.58 degrees

Hence the magnitude of θ such that the volume of the cone is a maximum is 56.58 degrees.

To learn more about magnitude click here https://brainly.com/question/29766788

#SPJ4

The answer to the question is Option A i.e. the forces form an action-reaction pair, and the child velocity is five times the velocity of the adult and in the opposite direction.

According to Newton’s third law of motion (every force has an equal and opposite reaction force), when two bodies interact, both of them apply forces on one another that are equal in magnitude but opposite in direction. This third law of motion by Newton is also known as the law of action and reaction and the forces form a action-reaction force.

Thus, when the adult pushes the child with a force of any magnitude, the child pushes the adult with the same magnitude force but in opposite direction thus the forces are a form of action-reaction pair.

as, F = ma and the forces are equal in magnitude for both, the velocity of the adult and that of the child have an inverse relation as that of masses of both, thus the velocity of child is five times that of the adult.

Thus, the answer to the question is Option A.

ALSO, the conditions follow the law only because the man and the child are standing on a frictionless floor i.e. ice so there is no static friction in play holding the heavier mass back for force to be nullified.

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ4

One way to provide gravity in space is to spin a cylinder. The centripetal acceleration is provided by the normal force of the outside wall .

However, in the broader sense, gravity is indeed a force because it describes the resulting interaction between two masses. Gravitational effects are fundamentally caused by the warping of spacetime and the motion of objects through the warped spacetime. However, the end result is as if a force was applied.

The numerical value for the acceleration of gravity is most accurately known as 9.8 m/s/s. There are slight variations in this numerical value (to the second decimal place) that are dependent primarily upon on altitude.

To know more about gravity visit

https://brainly.com/question/12008506

#SPJ1

The spinning of a cylinder is one method of creating gravity in space. The outer wall's normal force produces the centripetal acceleration.

But in a larger sense, gravity is a force because it represents the interaction that happens when two masses are in close proximity to one another. Fundamentally, the curvature of geometry and the passage of things through the stretched spacetime are what produce gravitational effects. However, the outcome appears to be the consequence of applying force.

The most precise measurement of the gravitational acceleration is 9.8 m/s/s. This number has small fluctuations (to the first significant digit) that are mostly determined by altitude.

To know more about gravity visit:

https://brainly.com/question/940770

#SPJ1

When the melting point, liquid density, and gas density are specified, 1.360 L of liquid nitrogen is created.

We presume that the specified volume of gas is fully liquefied because no other requirements are provided (no equilibrium gas phase).

Determine the mass of nitrogen as follows:

241.0L * 4.566 g/L = 1100.406g.

Determine the amount of liquid nitrogen based on the mass determined in step 2:

Volume = mass/liquid density = 1100.406g/L = 1.360 L.

A liquid's density is a measurement of how heavy it is for the amount measured. When two liquids of identical weight or volume are weighed, the heavier liquid is more dense. A liquid that is less dense than water will float on the surface of the water if it is gently added to the surface.

The correct question is:

At the boiling point, the density of liquid nitrogen is 809 g/L and that of the gas is 4.566 g/L. How many liters of liquid nitrogen are produced when 241.0 L of nitrogen gas is liquefied at 77.36 K?

Learn more about Density here:

https://brainly.com/question/6329108

#SPJ4

Time=0.9/2.998*10^8 is the equation for how long it takes light to travel 90 cm.

Velocity is the rate and direction of an object's movement, whereas speed is the time rate at which an object is moving along a path. In other words, velocity is a vector, whereas speed is a scalar value. the speed at which an object's position changes in any direction. The distance traveled in relation to the time it took to travel that distance is how speed is defined. The direction of a body or object's movement is defined by its velocity. In its basic form, speed is a scalar quantity. In essence, velocity is a vector quantity. It is the speed at which distance changes. It is the displacement change rate.

Here,

distance=90 cm=0.9 m

speed=2.998*10^8 m/s

thus time taken will be:

=distance/speed

time=0.9/2.998*10^8=0.10006 seconds

thus the expression is:

time=0.9/2.998*10^8

The expression for how long does it take light to travel 90 cm is time=0.9/2.998*10^8.

To know more about speed,

https://brainly.com/question/9998060

#SPJ4

The height of the fountain is 9.6 m.

The radius of the pool is calculated by applying the formula for circumference of a circle.

P = 2πr

where;

r = ( P ) / ( 2π )

r = ( 34.8 ) / ( 2π )

r = 5.54 m

The height of the fountain is calculated as follows;

the angle of elevation, radius of the pool and the height of the fountain forms a right triangle.

let the height of the fountain = h

tan 60 = h / r

h = r x tan 60

h = ( 5.54 m ) x tan 60

h = 9.6 m

Learn more about height here: https://brainly.com/question/974651

#SPJ1

The orbit radius for object A is B. one-half the orbit radius for object B

If the velocity only changes in direction (constant speed), then its acceleration has constant magnitude and is called centripetal.

An orbit that is perfectly balanced and has a constant speed is called a circular orbit. There are countless different elliptical orbits where velocity and speed are variable.

The velocity of an item rotating in a circle at a constant speed changes. This is thus because velocity depends on both speed and direction as a vector variable. Even if its speed is constant, the object in orbit is accelerating because its velocity is changing.

Learn more about acceleration

https://brainly.com/question/460763

#SPJ4

The average force applied to the skull by the fist is 5.9 kg x 498 m/s2, or 2,945 N.

Force is an action that can cause an object to change its motion and/or shape. It can be an external force, such as gravity, or an internal force, such as friction. Forces can be applied by a single object, such as pushing on a wall, or they can be the result of two objects interacting, such as when two objects collide. Newtons are used to measure force, which is a vector quantity both with magnitude and direction.

F = m x a

formula a = (Vf - Vi) / t

Therefore, the average force that the fist exerts on the head is 5.9 kg x 498 m/s2, which equals 2,945 N.

To learn more about force

https://brainly.com/question/13191643

#SPJ4

Speed is the rate at which an object moves, while velocity is the speed of an object in a given direction, and acceleration is affected by both speed and velocity, as an increase in either can cause an increase in acceleration.

To learn more about speed and velocity refer to:

https://brainly.com/question/21729272

#SPJ4

The magnitude οf the impulse is  −1120 Ns.

In its simplest form, an impulse is a fοrce that has been gradually integrated. By dividing the force's magnitude by the length of time it is applied, we can calculate the impulse's size for a force with a constant magnitude.

From the infοrmation given, the fοllowing can be deduced:

Height = 10m

Mass = 64kg

The kinetic energy is calculated as 1/2mv² while pοtential energy is calculated as mgh. Frοm the law of conversation:

[tex]\mathrm{ \dfrac{1}{2} mv^2 = mgh}[/tex]

[tex]\mathrm{v = \sqrt{2gh} }[/tex]

[tex]= \sqrt{2} \times \sqrt{9.8 } \times\sqrt{9}[/tex]

= 13.28 m/s

The change in velocity will be;

= 80(0 - 14)

= 80 × (-14)

= −1120 Ns

In cοnclusion, the magnitude οf the impulse is −1120 Ns.

Learn mοre about impulse on:

brainly.com/question/229647

#SPJ4

The post-collision speed and direction of cart B in cm/s is 32.5 cm/s in the right

From the law of conservation of momentum, the sum of initial momentum equals the sum of final momentum

Momentum, p-mv where m is the mass and v is the velocity

m1v1 + m2v2 = (M1V2 + M3V₁)

Let right direction be positive while left negative hence

1 x 27.6 + (0.5*-42.9) = 1 x -10.1 + 0.5v

16.25 = 0.5v

v = 16.25/0.5 = 32.5 cm/s in the right

Hence, post-collision speed and direction of cart B in cm/s is 32.5 cm/s in the right

Learn more about Speed here:

https://brainly.com/question/3004254

#SPJ4

positive while seconds moving counterclockwise Direction are negative 1.18lb.ft

Direction is characterized as the course that anything follows, the route that needs to be taken to go to a particular location, the direction where something is beginning to take shape, or the direction you are facing. When you turn right instead of left, that is an illustration of direction.

Directions explain how to perform an action or the proper sequence. You are provided instructions for a number of your activities and assessments. It's critical to comprehend the motivation behind the instructions. Before starting anything, it's also crucial to follow ALL of the instructions.

To know more about direction visit:

https://brainly.com/question/30173481

#SPJ4

It is illegal to follow an emergency vehicle at a distance of less than 500 feet or to stop within 300 feet of where an emergency vehicle is responding to an alarm.

Maintaining a safe distance from an emergency vehicle enhances the safety of both the emergency vehicle's crew and other drivers on the road by providing the emergency vehicle with the necessary space to maneuver and respond quickly to an alarm. When an emergency vehicle is responding to an alarm, it may need to make sudden stops, turns or change speed quickly, and if the vehicle behind is too close, it may not be able to react in time and cause an accident. By maintaining a safe distance, other drivers can react in a timely manner to the emergency vehicle's movements, reducing the risk of collisions and accidents. Additionally, maintaining a safe distance can also help to increase visibility for the emergency vehicle's crew, which can help them to navigate through traffic more safely and quickly. This ultimately contributes to the safety of all parties involved.

This statement is referring to laws and regulations regarding the distance that a driver must maintain from an emergency vehicle that is responding to an emergency call or alarm. Following an emergency vehicle too closely, or stopping too close to where an emergency vehicle is responding to an alarm, can impede the emergency vehicle's ability to respond quickly and safely.

It is illegal to follow an emergency vehicle at a distance of less than 500 feet because this distance is considered to be too close and can pose a safety hazard to the emergency vehicle and its crew. When an emergency vehicle is responding to an alarm, it may need to make sudden stops, turns or change speed quickly and if the vehicle behind is too close, it may not be able to react in time and cause an accident.

It is also illegal to stop within 300 feet of where an emergency vehicle is responding to an alarm. Stopping too close to the emergency vehicle can block the view of other drivers and make it difficult for the emergency vehicle to maneuver. Additionally, it can impede the flow of traffic and make it difficult for other vehicles to pass, which can cause a backup and delay the emergency vehicle's response time.

In summary, these regulations are put in place to ensure the safety of emergency vehicle's crews and other people on the road, and to make sure that emergency vehicles can respond to an alarm quickly and safely.

To know more about safety hazard, visit: https://brainly.com/question/30275814

#SPJ4

The patterns would you observe if you started at sea level and traveled upward through the earth's atmosphere to an elevation of 100 km are-

In this case, Option B and F are correct.

The atmosphere is what?

To know more about atmosphere click-

brainly.com/question/30157320

#SPJ4

Which of the following patterns would you observe if you started at sea level and traveled upward through the Earth's atmosphere to an elevation of 100 km? Choose one or more:

A. a progressive decrease in temperature

B. decreasing pressure

C. changes from warming trends to cooling trends at distinct boundaries D. increasing pressure

E. increasing density

F. decreasing density