Direction: Use the word bank to answer the following questions. Each word will be used only once. Crest Frequency Mechanical Infrared Trough Transverse Radio Gamma Wavelength Longitudinal Ultraviolet X-rays Visible Light Amplitude Electromagnetic___________________ is the maximum distance that matter is displaced from the resting position.

The density of a place refers to the quantity of things—which may include people, animals, plants, or objects—there are in it.

The quantity of things—which could include humans, animals, plants, or objects—in a given space is referred to as density. To determine density, divide the number of objects by the area's measurement. The number of people in a country divided by its area in square kilometres or miles is known as its population density.

The amount of "stuff" in a certain amount of space is measured by its density. For instance, a block of gold will be denser than a chunk of the softer, lighter element lead (Pb), which is a heavier element (Au). A brick is more dense than a block of Styrofoam. It is described as mass divided by volume.

To learn more about density refer to:

https://brainly.com/question/1354972

#SPJ1

When a train of a roller coaster moves upwards, the kinetic energy is getting lower. This conclusion is from the principle of conservation of energy.

The principle of conservation of energy states that "The total energy is neither increased nor decreased in any process. Energy can be transformed from one form to another, and transferred from one object to another, but the total amount remains constant."

In the same way, the Conservation of Mechanical Energy states that the total mechanical energy of a system is conserved. It can be expressed as

E₁ = E₂

KE₁ + U₁ = KE₂ + U₂

½mv₁ + mgh₁ = ½mv₂ + mgh₂

Where

The index 1 and 2 shows at point 1 and 2.

Suppose that a train of a roller coaster moves from point 1 at the lowest point and it moves upwards to point 2, at a higher point. When the train moves upwards,

So, the kinetic energy at point 2 would be

½mv₂ < ½mv₁

It would be lower than the kinetic energy at point 1.

Otherwise the potential energy is getting higher as the height is getting higher.

Thus, the kinetic energy when a train of a roller coaster moves upwards is getting lower.

Learn more about conservation of energy here:

brainly.com/question/29558218

#SPJ4

Answer:

Gravity and Air Resistance Quick Check

Explanation:

1)It stops accelerating.

2)The greater the object’s surface area, the more air resistance it encounters.

3)Vt=2w/dACd

4)363 m/s

5)a typical meteorite’s weight, surface area, and coefficient of drag; air density close to Earth

This is for gaca people other people might not have this so relook at it to make sure or u will get a low grade

The conditions must exist for a solar eclipse to occur are:

A solar eclipse is a phenomenon in which the sun's light is covered by the moon during the day. It occurs when the position of the Sun, the Moon and the Earth is in the exact same plane.

The Moon's shadow covers the Earth's surface during the day. The Sun's rays are blocked by the Moon so that during the day, the Sun's light looks dim, even quite dark.

A solar eclipse is only experienced by some areas on the Earth's surface. It happens because the Moon that covers the Sun is much smaller than the Sun. A small part of the Earth experiences a total solar eclipse. A total solar eclipse occurs in the Moon's umbra, the area completely covered by the Moon's shadow. Most areas of the Earth experience a partial solar eclipse. A partial solar eclipse occurs in the Moon's penumbra, the area partially covered by the Moon's shadow.

Learn more about solar eclipse here:

brainly.com/question/4279342

#SPJ4

The sum total of all forces which are acting on an object is known as the net force. A mass can accelerate due to the net force.

The sum total of all the forces which are acting on an object is known as the net force. A mass that can accelerate due to net force on an object. Whether a body is at rest or in motion, it is a subject to another force. When there are a lot of forces which are acting on a system, the term net force is used to denote it.

Here, r₁₂ = 0.550m r₂₃ = 0.550m. Then the distance from the first charge to the third one will be:

r₁₃ = r₁₂ + r₂₃ = 0.550 + 0.550 = 1.1m

According to the Coulomb's law, the net force on particle q₂ will be equal to the sum of the forces on particle q₂ from the particle q₁ and q₃.

F₃+ = F₁₃ +F₂₃ = q₁q₂/r²₁₃ + k q₃q₂/r²₂₃

Where, k = 9 × 10⁹ N m²/C²

Substituting numerical values, we obtain:

F₃ = 9 × 10⁹ (-66.3 × 10⁻⁶)(-43.2 × 9 × 10⁻⁶)/ 1.45² + 9 × 10⁹ × 108 × 10⁻⁶ (-43.2 × 10⁻⁶) / 0.550²

Learn more about Net force here:

https://brainly.com/question/29261584

#SPJ1

The speed of sound in the room is 354 m/s. The result is obtained by using the formula for frequency in an open organ pipe.

An organ pipe is an element that produces sound resonating at a specific pitch when pressurized air is exerted through it.

There are two kinds of organ pipe. They are

The frequency of an open organ pipe can be calculated by

fₙ = v / λ

fₙ = (n + 1)v / 2L

Where

Note:

An organ pipe in which open at both ends produces sound.

Find the speed of sound in the room!

The frequency of second overtone means frequency of the second-harmonic. So, n = 2.

Using the formula above, the speed of sound is

fₙ = (n + 1)v / 2L

f₂ = (2 + 1)v / 2(1.75)

303 = 3v/3.5

3v = 303 × 3.5

3v = 1060.5

v = 353.5

v ≈ 354 m/s

Hence, in the room of the open organ pipe, the speed of sound is 354 m/s. The correct answer is (c).

Learn more about organ pipe here:

https://brainly.com/question/29590044

#SPJ4

Temperature change in adiabatic heating occurs due to: (b) a pressure increase.

The adiabatic process can be either reversible or irreversible. Following are the essential conditions for the adiabatic process to take place:

As we know, heat, temperature, and the external environment are factors responsible for the flow of heat from one system to another. Changes do take place when heat is transferred. A process in which no heat transfer takes place is known as an adiabatic process.

There are several instances, some are stated below:

To know more about thermodynamics visit:

https://brainly.com/question/14041640

#SPJ4

Different masses change the temperature at different rates when they are exposed to the same amount of thermal energy. The reason for this is that the amount of mass affects an object's ability to absorb thermal energy.

Thermal energy is the energy enclosed within a system that controls its temperature. Heat is also defined as the flow of thermal energy. Thermodynamics is a branch of physics that deals with how heat is transmitted between various systems and how work occurs in the process.

Once the temperatures are equal, there is no net heat transfer because the amount of heat transmitted from one object to the other is equal to the amount of heat returned. Temperature change is a significant effect of heat transfer: Heating raises the temperature, while cooling lowers it.

Learn more about thermodynamics here;

https://brainly.com/question/30207871

#SPJ4

The hertz (Hz) is the SI frequency unit named after the German physicist Heinrich Hertz; one hertz means that an event occurs once every second.

The frequency of a repeating event is the number of occurrences per unit of time. It is distinct from angular frequency and is sometimes referred to as temporal frequency. The unit of frequency is hertz, which equals one event per second. The number of waves that pass through a fixed point in a given amount of time is described by frequency. So, if a wave takes half a second to pass, the frequency is 2 per second. The frequency is 100 per hour if it takes 1/100 of an hour.

Here,

The hertz (Hz) is the SI unit of frequency, named after the German physicist Heinrich Hertz; one hertz means that an event occurs once every second.

To know more about frequency,

https://brainly.com/question/1415786

#SPJ4

Stephen hawking is called the god of physics.

Stephen William Hawking was a British theoretical physicist, cosmologist, and author who, at the time of his death, was the Director of Research at Cambridge University's Center for Theoretical Cosmology. Stephen Hawking was considered one of the greatest theoretical physicists in history. From the Big Bang to Black His Hole, his work on the origin and structure of the universe has revolutionized the field, but his best-selling book is an excellent introduction to readers who may not have Dr. Hawking's scientific background. also appealed. Hawking is best known for discovering that black holes emit radiation that can be detected with special instruments.

Learn more about Stephen hawking in

https://brainly.com/question/915061

#SPJ4

Acceleration of the ball is positive as it falls down because there is a gravity that make it faster.

Constant acceleration define as an even more specific type of accelerated moving object. An object that moves with constant acceleration has a speed that changes for the same amount every second. For a finite time, constant acceleration are determine by deviation between initial velocity and  the velocity during the end of the counted time. It is formulated as: a = V - Vo * t where Vo is initial velocity, t is counted time, and V is the counted velocity in the end of counted time.

Learn more about constant acceleration here

https://brainly.com/question/28693744

Unless influenced by an imbalanced force, an item at rest stays at rest, and an object in motion stays in motion while maintaining a steady speed and a straight line.

Newton's first law states that an object will stay at rest or in uniform motion along a straight line unless driven to alter its condition by the action of an external force.

Inertia is the tendency of a body to resist changes in its state of motion. If all external forces cancel one other out, there is no net force acting on the item. If there is no net force applying to the item, it will maintain a constant velocity.

Learn more about Inertia:

https://brainly.com/question/2419201

#SPJ4

A ballistic issue is when a projectile moves unevenly through a resistant material, such as air. Any missile, spacecraft, or aero plane are all considered "rockets," as are certain other objects.

Ballistics is a branch of mechanics that studies the projectile's launch, flight, behaviour, and effects. the art or science of making and accelerating projectiles to achieve a desired performance, especially projectiles like bullets, unguided bombs, rockets, or the like. Cartridges are made utilising the ballistics scientific theory by a weapons engineer or armourer, commonly known as a "ballistician." Any rocket-powered missile, spacecraft, aeroplane, or other type of vehicle is referred to as a "rocket." The word "ballistics" comes from a Greek verb that means "to toss."

Learn more about projectile here

brainly.com/question/11422992

#SPJ4

Three main sources of electrical energy generation 40 years from now would predictably be:

Renewable energy which includes sources such as solar, wind, geothermal, and hydroelectric power, which are considered to be sustainable and have low environmental impact. As concerns about climate change and the need to reduce carbon emissions continue to grow, it is likely that renewable energy sources will play an increasingly important role in meeting energy needs.

Nuclear power plants are a reliable and low-carbon source of energy, but have a lot of concerns regarding safety, waste and proliferation. Natural gas is considered a transition fuel, as it emits less carbon dioxide than coal, but more than renewable energy sources.

Find out more on electrical energy sources at https://brainly.com/question/2293158

#SPJ1

When θ = 0o ➔ τ = 0. The loop's plane must be opposite the magnetic field in order for there to be a minimum torque, hence the angle should be zero degrees.

. We use the magnetic flux as a tool to illustrate how the electromagnet flux is distributed in the vicinity and inside everything magnetic in nature.

Our planet is shielded from space rays and charged particles from our Sun by the magnetic field, which is created by the churning of liquid metal in the Earth's core. It also offers the framework for compass navigation.

To know more about  magnetic field visit:

https://brainly.com/question/23096032

#SPJ4

The stem of meat thermometer shall be constructed of stainless steel.

An instant-read thermometer is a more popular type that you can quickly use to determine whether food is done by inserting it into it for a short period of time. A probe thermometer is another kind; it is made to stay inside the meat throughout cooking.

Still, it can get as cold as -58 to as hot as 572 degrees Fahrenheit. We used this thermometer to check the temperature of our meats, and we discovered that it was just as accurate—if not more—and quicker. Even though the price is higher, the product's high quality and prolonged battery life make it worthwhile.

To know more about thermometer visit:

https://brainly.com/question/14056623

#SPJ4

As 'd' becomes doubled in the parallel-plate capacitor are connected to a battery, energy decreases by the factor of 2.

The energy stored in a parallel plate capacitor is given by the following formula:

[tex]U=\frac{1}{2} CV^{2}[/tex]

[tex]C= \frac{A}{d}[/tex]∈

then,

[tex]U= \frac{1}{2} \frac{A}{d} V^{2}[/tex] ----- (1)

As it can be seen from the equation (1) that energy is inversely proportional to the separation between the plates. 'D' becomes doubled, and energy decreases by the factor of 2.

Energy stored in a capacitor can be expressed as the following:

E = (1/2)CV^2 .....1

We must know that the capacitance of a capacitor is inversely proportional to the distance between the two plates.

C = kA/d ....2

Whenever the value d doubles, and every other determinant of capacitance remains the same, the value of capacitance is halved.

Cf = kA/2d = C/2

Cf = C/2

Potential difference remains the same, the energy stored would also be halved since the energy stored in the capacitor is directly proportional to the capacitance.

Ef = (1/2)(Cf)V^2

Ef = (1/2)(C/2)V^2 = [(1/2)CV^2]/2

Ef = E/2

Where;

E is the initial energy stored in the capacitor respectively

Ef is the final energy stored in the capacitor respectively

C is the initial capacitance of the capacitor.

Cf is the final capacitance of the capacitor.

d is the distance between the plates

A is the area of plates

k is the permittivity of dielectrics

Learn more about capacitors:

brainly.com/question/29100869

#SPJ4

Intraspecific competition occurs between individuals of the same species (e.g., males competing for reproduction) while interspecific competition occurs between individuals of different species (e.g., fish for food resources).

Intraspecific competition is competition between members of the same species for resources, such as food, water, and space, which is an important factor in the regulation of population size, as it helps to keep population numbers in balance in the environment.

Therefore, with this data, we can see that intraspecific competition is a  kind of competition that happens when members of the same species fight for the same.

Learn more about Intraspecific competition here:

https://brainly.com/question/12691387

#SPJ1

Answer:

Therefore, the force multiplied by time is equal to the change in the momentum of the object. This quantity is known as impulse delivered by the force.

Explanation:

brainiest

The metric system uses Celsius as the primary unit of measurement for temperature.

Nearly all nations in the world use the metric system as their official unit of measurement, which includes Celsius. The Celsius scale is used to measure temperature in most scientific disciplines. The freezing point of water is zero degrees Celsius, and the boiling point is one hundred degrees Celsius. By the middle of the 20th century, Celsius, the most widely used temperature unit in the modern metric system, had been adopted by the majority of the world. Anders Celsius, a Swedish astronomer, created the Celsius scale in 1742.

Most places in the globe measure temperature using the Celsius system (°C). The historical development of this empirical scale led to the definition of its zero point, 0 °C, as the freezing point.

To learn more about Standard Unit :

https://brainly.com/question/14354072

#SPJ4

If 400 joules of work is done, 100 newtons force much have been applied.

In order to calculate the force required to lift an object weighing 220 newtons to a height of 4 meters with a lever having an effort arm of 10 meters and a load arm of 2 meters, we must first determine the amount of work done.

Since 400 joules of work was done, we can use the formula Work = Force x Distance to calculate the force required.

In this case, the distance is 4 meters, so the equation becomes

400 = Force x 4.

By dividing 400 by 4 we can determine that the force required is 100 newtons.

Therefore, in order to lift the object weighing 220 newtons to a height of 4 meters with a lever having an effort arm of 10 meters and a load arm of 2 meters, 100 newtons of force must have been applied.

Learn more about Force:

brainly.com/question/13191643

#SPJ4

Four systems of equations are 1) Graphical system 2) Elimination method system, 3) Substitution system 4) Cross multiplication system. These systems or methods are used to solve an equation.

Graphical method: To solve linear equations graphically, first draw the graph for both equations in the same coordinate graph and locate the intersection point on the graph.

Elimination method: In this method, any of the coefficients is first eliminated by equating. After eliminating the coefficient, the equations are resolved to get the other equation. For example:

3x + 2y = 9 ———–(i)

x – y = 6 ———–(ii)

Here, if equation (ii) is multiplied by 3, the coefficient of “x” will become the equal and can be eliminated.

So, multiply equation (ii) × 3 and then subtract equation (i)

3x + 2y - 9 - 3x-3y-18 = 0

y = -9/5

Now, put the value of y = 1.8 in equation (ii).

So, x – 1.8 = 6

x = 4.2

Substitution method: To solve a linear equation using this method, first, take the value of one variable separately from any of the equations. Then, substitute the value of this variable in the second equation and solve it.

Cross multiplication method: Linear equations can be easily solved using this method. In this technique is used to simplify the solution. Following formula is used for solving 2 variable equation:

x /(b₁ c₂ − b₂ c₁) = y / (c₁ a₂ − c₁ a₁) = 1 /(b₂ a₁− b₁a₂)

To know more about Elimination method, here

https://brainly.com/question/30287548

#SPJ4

The electric field has an angle of 0 degrees and a magnitude of 2546.35 N/C.

An electric field is a physical field that surrounds electrically charged particles and acts as an attractor or repellent to all other charged particles in the vicinity. It can also refer to a system of charged particles' physical field. Each location in space where a charge exists in any form can be considered to have an electric field attached to it. The electric force per unit charge is another name for an electric field. E = F/Q is the formula for the electric field. Volts per meter is the SI unit for the electric field. The Newton's per coulomb unit is the same as this one. Newton is a unit of force and Coulomb is a unit of energy in these derived units.

Here,

E=kq/r^2

r= 5 x r^2 = 7.07 cm or .0707 m

E=(9 x 10^9)(1 x 10^-9)/(.0707)^2

= 1800.5 N/C

Now to find the x component,

cos 45 = x/1800.5

x= 1273.18 N/C

Now just multiply by 2 to accommodate both charges,

E=2546.35 N/C in direction of 0 degrees

The electric field has a magnitude of 2546.35 N/C and an angle of 0 degrees.

To know more about electric field,

https://brainly.com/question/15800304

#SPJ4

To find the radius of the orbit of Mars, we can use the equation T^2 = (4π^2 / G(M)) * r^3, where T is the orbital period, G is the gravitational constant, M is the mass of the sun, and r is the orbital radius.

Plugging in the given values:

(2.46 years)^2 = (4π^2 / 6.672 * 10^-11 Nm^2/kg^2) * r^3

r = ((2.46 years)^2 * (6.672 * 10^-11 Nm^2/kg^2)) / (4π^2) * (1.989 * 10^30 kg)^(1/3)

To find the orbital speed of Mars, we can use the equation v = 2πr / T, where v is the orbital speed, r is the orbital radius, and T is the orbital period.

Plugging in the given values:

v = 2π * r / (2.46 years)

Note: You should convert 2.46 years to seconds using year to seconds conversion factor.

Uranium atom has an atomic number of 92 which means there are 92 protons and 92 electrons in the atomic structure. U-238 has 146 neutrons in the nucleus, but the number of neutrons can vary from 141 to 146.

1) The velocity of the barium atom in reference to the tube can be determined using the conservation of momentum principle. The overall momentum of the uranium atom before decay is equal to the total momentum of the krypton and barium atoms after decay. Therefore:

mU * vU = mK * vK + mBa * vBa

where mU, mK, and mBa are the masses of the uranium, krypton, and barium atoms, respectively, and vU, vK, and vBa are the atoms' velocities in relation to the tube.

For vBa, we discover:

mBa = vBa = (mU * vU - mK * vK)

2) To calculate the Krypton atom's velocity in relation to the enclosing tube, the velocity of the Krypton atom relative to the barium atom must be included.

In light of this, vK = vK in relation to barium + vBa

Where vK relative to barium (2.35 x 106 m/s) is the issue statement's reference to the velocity of the krypton atom with respect to the barium atom.

To learn more about atom refers to:

https://brainly.com/question/17545314

#SPJ1

The sandbag takes  0.306 seconds to reach the ground.

To determine the time it takes for the sandbag to reach the ground, we can use the equations of motion:

y = vₒt + (1/2)at²

Where y is the final vertical displacement, vₒ is the initial velocity, t is the time, and a is the acceleration. Since the sandbag is being released from rest, the initial velocity is zero.

y = (1/2)gt²

where g is the acceleration due to gravity, which is approximately 9.8 m/s²

Now we know the acceleration of the hot air balloon is g/4, and we know that the acceleration of the sandbag is g once it is released from the hot air balloon.

We need to find the time when the vertical displacement of the sandbag is the same as the altitude of the hot-air balloon at the time of release.

y = (1/2)(g/4)t² = (1/2)gt²

we can set the two equations equal to each other.

(1/2)(g/4)t² = (1/2)gt²

then we can solve for t

t = (2 * g/4 ) / g = 2/g = 2/9.8 = 0.204 seconds = 0.204 * 1.5 = 0.306 seconds

So the sandbag takes 1.5 seconds to reach the ground.

For more questions like Sandbag click the link below:

https://brainly.com/question/13194737

#SPJ4

Empirical evidence is the information obtained through observation and documentation of certain behavior and patterns or through an experiment.

The main ways to gather empirical evidence are through experiments or observation. The term "primary sources" refers to the observations or experiments. But it can also be found in a variety of secondary sources, such as books, articles, reports, newspapers, etc.

A fundamental component of the scientific research approach that can be used in many fields is empirical evidence. The gathering of objective evidence is the major issue with empirical research. Researchers must carefully plan their study while reducing the risk of probable mistakes.

In the field of science, it is typical for numerous researchers or scientists to acquire data simultaneously by conducting identical studies. Peer review is another crucial scientific strategy used to substantiate the data presented in a study or piece of research.

To learn more about Empirical Evidence refer to  :

https://brainly.com/question/4822928

#SPJ1

Answer: Robert Wilson and Arno Penzias

Explanation:

Newton's second law is also known as the law of acceleration or the force law. It states that the acceleration of an object is directly proportional to the net force acting on the object and inversely proportional to its mass.

Newton's second law, also known as the law of acceleration or the force law, states that the acceleration of an object is directly proportional to the net force acting on the object and inversely proportional to its mass.

In other words, it says that the more force applied to an object, the greater its acceleration will be, and the more massive an object is, the less it will accelerate for a given force.

This law is typically represented mathematically as F=ma, where F is the net force, m is the mass of the object, and a is the acceleration of the object. It is a fundamental principle in the study of motion and is used to calculate the motion of objects under the influence of forces.

To learn more about Newton's second law at

https://brainly.com/question/13447525?referrer=searchResults

#SPJ4

The mole, often known as mol, is a SI unit that counts the particles in a given substance. 6.0221*10^23 atoms, or other fundamental building blocks like molecules, make up one mole.

A substance's mole is equivalent to 6.022 x 10^23 of that material (such as atoms, molecules, or ions). The term "Avogadro's number" or "Avogadro's constant" refers to the number 6.0221*10^23. To convert between mass and the quantity of particles, use the mole concept.

The ratio between the atomic mass unit and gram mass unit sizes affects the number in a mole, or Avogadro's number. One mole of hydrogen atoms weighs about one gram, compared to the mass of one hydrogen atom, which is roughly one unit.

Learn more about Mole Visit: brainly.com/question/30236487

#SPJ4