Yes. A reaction occurs when aqueous solutions of zinc chloride and silver(I) acetate are combined.
When these two solutions are mixed, the ions present in them react with each other to produce a white precipitate of silver chloride (AgCl) and aqueous zinc acetate (Zn (CH₃COO)₂).
The chemical reaction is as follows:
ZnCl₂ (aq) + 2AgCH₃COO (aq) → 2AgCl (s) + Zn(CH₃COO)₂ (aq)
The net ionic equation for the reaction can be written as:
Zn²⁺ (aq) + 2Ag⁺ (aq) → 2AgCl (s) + Zn²⁺ (aq)
The solubility rules can be used to determine the solubility of compounds.
According to the solubility rules, silver chloride (AgCl) is insoluble in water and precipitates out of the solution as a white solid. Zinc acetate (Zn(CH₃COO)₂) is soluble in water and remains in the solution as aqueous ions (Zn²⁺ and CH₃COO⁻). Therefore, the balanced equation represents a double displacement reaction. Hence, the answer is Yes.
To know more about aqueous solutions visit:-
https://brainly.com/question/31326231
#SPJ11
A certain metal M forms a soluble nitrate salt MNO3. Suppose the left half cell of a galvanic cell apparatus is filled with a 4.50mM solution of MNO3 and the right half cell with a 4.50M solution of the same substance. Electrodes made of M are dipped into both solutions and a voltmeter is connected between them. The temperature of the apparatus is held constant at 35.0°C.
Which electrode will be positive? left
right
What voltage will the voltmeter show? Assume its positive lead is connected to the positive electrode.
Be sure your answer has a unit symbol, if necessary, and round it to
2
significant digits.
The right electrode will be positive, and the voltmeter will show a voltage of 0.18 V.
To determine which electrode will be positive in the galvanic cell, we need to consider the reduction potentials of the metal M.
Since the metal M is being oxidized in the right half-cell, the electrode connected to the right half-cell will be the positive electrode.
To find the voltage that the voltmeter will show, we can use the Nernst equation:
Ecell = E°cell - (0.0592/n) * log(Q)
Where:
Ecell = Cell potential
E°cell = Standard cell potential
n = Number of electrons transferred in the cell reaction
Q = Reaction quotient
In this case, the cell reaction is the reduction of MNO3:
MNO3 + ne- -> M
The standard reduction potential of MNO3 is not provided, so we cannot determine the exact E°cell value.
However, we can use the Nernst equation to calculate the approximate voltage based on the concentration ratio of the MNO3 solutions.
Since the left half-cell has a concentration of 4.50 mM (millimolar) and the right half-cell has a concentration of 4.50 M (molar), the concentration ratio (Q) is:
Q = [MNO3]left / [MNO3]right = (4.50 * [tex]10^{(-3)[/tex]) / (4.50)
Assuming the reaction involves the transfer of one electron (n = 1), we can calculate the voltage (Ecell) using the Nernst equation. The standard cell potential term, E°cell, will be omitted:
Ecell = - (0.0592/n) * log(Q)
Ecell = - (0.0592/1) * log((4.50 * [tex]10^{(-3)[/tex]) / (4.50))
Calculating this value, we get:
Ecell ≈ -0.0592 * log([tex]10^{(-3)[/tex]))
Ecell ≈ -0.0592 * (-3)
Ecell ≈ 0.1776 V
To know more about electrode refer here
https://brainly.com/question/29667817#
#SPJ11
plant → lizard→ snake → owl → jaguar
!Explain the food chain in 5 sentence!
The food chain is a series of organisms that depend on one another for food. In this case, the plant is the primary producer, the lizard is the primary consumer, the snake is the secondary consumer, the owl is the tertiary consumer, and the jaguar is the apex predator. The plant is the base of the food chain and the source of energy for all the other organisms in the chain.
For such more question on ecosystem
https://brainly.com/question/1514975
#SPJ8
19
Select the correct answer from each drop-down menu.
A certain atom has 22 protons and 19 electrons. This atom loses an electron. The net charge on the atom is now
22 protons and 19 electrons were to gain 3 electrons, the net charge on the atom would be
O
If this same atom with
After losing an electron: Net charge = +4 After gaining 3 electrons: Net charge = -2
An atom with 22 protons and 19 electrons has a net charge of +3 since the number of protons (positive charges) exceeds the number of electrons (negative charges) by 3.
When this atom loses an electron, it means that one electron is removed from the atom. Since electrons carry a negative charge, the atom becomes more positively charged. Therefore, the net charge on the atom after losing an electron is +4.
This is because the number of protons (positive charges) remains the same (22), but the number of electrons (negative charges) decreases from 19 to 18.
On the other hand, if the atom were to gain 3 electrons, it means that 3 electrons are added to the atom. Electrons carry a negative charge, so the atom becomes more negatively charged. The net charge on the atom after gaining 3 electrons would be -2.
This is because the number of protons (positive charges) remains the same (22), but the number of electrons (negative charges) increases from 19 to 22.
It is important to note that the net charge of an atom is determined by the balance between the number of protons (positive charges) and the number of electrons (negative charges). Gaining or losing electrons can alter this balance and result in a change in the net charge of the atom.
For more such questions on electron visit:
https://brainly.com/question/26084288
#SPJ8
Required information The Foundational 15 (Algo) [LO2-1, LO2-3, LO2-4, LO2-5, LO2-6, LO2-7, LO2-8] (The following information applies to the questions displayed below.) Osio Company prepared the following contribution format income statement based on a sales volume of 1,000 units (the relevant range of production is 500 units to 1.500 units): Foundational 2-7 (Algo) Required: 7. If the variable cost per unit increases by $1, spending on advertising increases by $1,350, and unit sales increase by 170 units, what would be the net operating income? Note: Round "Per Unit" calculations to 2 decimal places.
The net operating income would be $1,880. To calculate this, we determined the increase in variable costs and advertising spending. Then, we calculated the total increase in expenses and subtracted it from the contribution margin based on the increase in unit sales.
To calculate the net operating income, follow these steps:
Step 1: Calculate the increase in variable costs:
Increase in variable costs = Variable cost per unit x Increase in unit sales
Variable cost per unit = $1
Increase in unit sales = 170 units
Increase in variable costs = $1 x 170 units = $170
Step 2: Calculate the increase in advertising spending:
Increase in advertising spending = $1,350
Step 3: Calculate the total increase in expenses:
Total increase in expenses = Increase in variable costs + Increase in advertising spending
Total increase in expenses = $170 + $1,350 = $1,520
Step 4: Calculate the net operating income:
Net operating income = Contribution margin - Total increase in expenses
Contribution margin is the difference between total sales revenue and total variable expenses.
Given that the sales volume is 1,000 units, you need to calculate the contribution margin per unit.
Contribution margin per unit = Total sales revenue per unit - Total variable expenses per unit
To calculate the total sales revenue per unit, divide the total sales revenue by the sales volume.
Total sales revenue = $50,000 (given)
Sales volume = 1,000 units (given)
Total sales revenue per unit = $50,000 / 1,000 units = $50
To calculate the total variable expenses per unit, divide the total variable expenses by the sales volume.
Total variable expenses = $30,000 (given)
Total variable expenses per unit = $30,000 / 1,000 units = $30
Contribution margin per unit = $50 - $30 = $20
Now, calculate the net operating income:
Net operating income = Contribution margin per unit x Increase in unit sales - Total increase in expenses
Net operating income = $20 x 170 units - $1,520
Net operating income = $3,400 - $1,520 = $1,880
To know more about variable costs visit :
https://brainly.com/question/14280030
#SPJ11
explain how natural selecting leads to predominance and suppresion of traits in a population
This is actually science and when i say science, i mean as in like genetic mutation, DNA, etc, i just cant find the right subject.
Natural selection is a process in which organisms that are better adapted to their environment tend to survive and produce more offspring. These offspring are likely to inherit the traits that made their parents successful, which can lead to predominance and suppression of certain traits in a population.
Natural selection can lead to the predominance of certain traits in a population because organisms that possess advantageous traits are more likely to survive and reproduce, passing on those traits to their offspring. For example, if a population of birds lives in an environment where seeds are scarce, birds with larger beaks that are better suited for cracking open tough seeds are more likely to survive and reproduce. Over time, this can lead to a predominance of birds with large beaks in the population.Conversely, natural selection can also lead to the suppression of certain traits in a population. This occurs when organisms with certain traits are less likely to survive and reproduce, which means that those traits are less likely to be passed on to future generations. For example, if a population of moths lives in an environment where predators can easily spot them because of their light coloration, moths with darker coloration that are better camouflaged are more likely to survive and reproduce. Over time, this can lead to a suppression of the light coloration trait in the population.Natural selection is driven by genetic variation, which is created by mutation, gene flow, and sexual reproduction. Mutations are random changes in DNA that can create new traits, while gene flow and sexual reproduction can introduce new traits into a population. The traits that are favored by natural selection are those that increase an organism's chances of survival and reproduction in a given environment, which can lead to their predominance in a population.For such more question on camouflaged
https://brainly.com/question/15925070
#SPJ8
What kind of intermolecular forces act between a formaldehyde (H 2
CO) molecule and a hydrogen chloride molecule? Note: If there is more than one type of intermolecular force that acts, be sure to list them all, with a comma between the name of each force.
Formaldehyde (H2CO) has dipole-dipole, dipole-induced dipole and dispersion forces. In addition to this, the hydrogen chloride (HCl) molecule has dipole-dipole, dipole-induced dipole, and hydrogen bonding forces.
Dipole-dipole forces are a type of intermolecular forces that occur when two polar molecules come close to one another. A polar molecule has a net dipole because of the presence of polar covalent bonds.Dipole-dipole forces occur between the positive and negative ends of dipoles. Since formaldehyde (H2CO) is a polar molecule due to the presence of an oxygen atom in the molecule. This type of intermolecular force occurs in formaldehyde.Hydrogen bonding forcesWhen hydrogen is bonded with an electronegative element such as nitrogen (N), oxygen (O), or fluorine (F), it creates a strong intermolecular force known as hydrogen bonding.
Hydrogen bonding occurs in hydrogen chloride (HCl) due to the electronegativity difference between hydrogen and chlorine. Dipole-induced dipole forcesDipole-induced dipole forces arise when an ion or polar molecule induces a dipole in a non-polar molecule. Dipole-induced dipole forces exist between formaldehyde and hydrogen chloride molecules. Dispersion forcesDispersion forces arise when electrons in two non-polar atoms or molecules interact. Dispersion forces act between both molecules, H2CO and HCl.
To know more about Formaldehyde:
https://brainly.com/question/29797593
#SPJ11
1.
If 25.0mL of an unknown sample was titrated with 0.115M NaOH and produced the titration curve below, answer the questions below regarding this titration.
1. The TITRANT used in this titration would be classified as weak base, strong acid, weac acid, trong base
2. The ANALYTE used in this titration would be classified as [ Select ] ["strong acid", "weak base", "weak acid", "strong base"]
3. The pH at the equivalence point would be characterized as [select]
2)
Consider the titration of 100.0mL of 0.10M NH3 with 0.10M HNO3. What is the pH of the solution after the addition of 200.0mL of HNO3?
Kb of NH3 = 1.8 x 10-5
3)
What would be the expected pH at the half-equivalence point for the titration of 25.0mL of 0.150M HOCl (Ka= 3.0 x 10-8) with 0.150M NaOH?
The TITRANT used in this titration would be classified as a strong base.
The ANALYTE used in this titration would be classified as a weak acid.
The pH at the equivalence point would be characterized as 7.0.
The TITRANT used in this titration would be classified as a strong base. Titrant is the solution that is used to titrate the unknown solution. Here, NaOH (sodium hydroxide) is the titrant. NaOH is a strong base.
The ANALYTE used in this titration would be classified as a weak acid. The analyte is the unknown sample solution, which is being titrated with the known solution NaOH.
The titration curve shows that the equivalence point of the solution is reached at a pH value of 8.4, indicating that the unknown solution is an acid. Here, the unknown solution is a weak acid.
The pH at the equivalence point would be characterized as 7.0. At the equivalence point of a titration, the moles of acid and base present in the solution are equivalent.
At this point, the pH of the solution is 7. Here, the equivalence point is reached at a pH value of 8.4. Thus, the unknown solution is basic and the pH needs to be neutralized with the strong acid, NaOH. So, the final pH is 7.
To learn more about titration, refer below:
https://brainly.com/question/31483031
#SPJ11
Metals cannot bind directly to protein, but are held in place by
steric interactions.
True or False?
The statement "Metals cannot bind directly to protein, but are held in place by steric interactions." is false.
Metals can indeed bind directly to proteins through specific interactions, forming metal-protein complexes. These interactions are not solely based on steric interactions, but rather involve coordination bonds between the metal ion and specific amino acid residues within the protein's active site or metal-binding sites.
Proteins contain amino acids with functional groups such as carboxylate (COO⁻), amine (NH₂), and thiol (SH) groups that can act as ligands to coordinate with metal ions. The metal ion forms coordination bonds with these ligands, leading to the formation of metal-protein complexes.
The coordination bonds are typically formed through the donation of electron pairs from the ligands to the metal ion. This interaction can involve different types of coordination complexes, including octahedral, tetrahedral, square planar, or trigonal bipyramidal geometries, depending on the metal and the ligands involved.
The binding of metals to proteins is crucial for various biological processes, including enzymatic activities, electron transfer reactions, and structural stabilization. The specific binding sites and coordination environments within proteins allow for selective metal binding and play a vital role in their biological functions.
Therefore, metals can bind directly to proteins through specific interactions, rather than being solely held in place by steric interactions.
To know more about amino acids refer here:
https://brainly.com/question/31872499#
#SPJ11
A bottle of chlorine bleach (such as Clorox TM ) is just an aqueous solution of sodium hypochlorite. It contains 82.5 g/L of NaClO. What is the pH of this solution? The Ka of HClO is 2.9×10−8
A bottle of chlorine bleach (such as Clorox TM ) is just an aqueous solution of sodium hypochlorite. It contains 82.5 g/L of NaClO. the pH of the sodium hypochlorite solution is approximately 9.66.
To determine the pH of the sodium hypochlorite solution, we need to consider the dissociation of sodium hypochlorite (NaClO) in water:
NaClO(aq) ⇌ Na+(aq) + ClO-(aq)
The sodium ion (Na+) does not affect the pH, so we will focus on the dissociation of the hypochlorite ion (ClO-) in water:
ClO-(aq) + H2O(l) ⇌ HClO(aq) + OH-(aq)
The equilibrium expression for this reaction is given by:
Kw = [HClO][OH-] / [ClO-]
We can assume that the concentration of hydroxide ions (OH-) from the dissociation of water is negligible compared to the concentration of hydroxide ions from the dissociation of sodium hypochlorite. Therefore, we can simplify the equilibrium expression as:
Kw ≈ [HClO] / [ClO-]
Given that the Ka of HClO is 2.9×10^(-8), we can write the equilibrium constant expression as:
Ka = [H+][ClO-] / [HClO]
Since the concentration of H+ ions is equal to the concentration of HClO in this case, we can rearrange the equation as:
[H+][ClO-] = Ka[HClO]
Now, let's substitute the given values:
[H+][ClO-] = (2.9×10^(-8))(82.5 g/L)
To find the concentration of ClO-, we need to convert grams to moles. The molar mass of NaClO is 74.44 g/mol, so:
Concentration of ClO- = (82.5 g/L) / (74.44 g/mol)
= 1.107 mol/L
Substituting the values:
[H+](1.107 mol/L) = (2.9×10^(-8))(82.5 g/L)
[H+] = (2.9×10^(-8))(82.5 g/L) / (1.107 mol/L)
= 2.169×10^(-10) mol/L
To find the pH, we can take the negative logarithm (base 10) of the hydrogen ion concentration:
pH = -log[H+]
= -log(2.169×10^(-10))
≈ 9.66
Therefore, the pH of the sodium hypochlorite solution is approximately 9.66.
To know more about hypochlorite refer here:
https://brainly.com/question/31460039#
#SPJ11
A. How to differentiate an ester from a carboxylic acid in an
NMR (both carbon and proton) spectrum.
- Do they differ in peaks?
- How do I identify them immediately?
In both carbon and proton NMR spectra, esters and carboxylic acids can be differentiated based on their characteristic peaks. Esters exhibit specific signals that distinguish them from carboxylic acids.
In a proton NMR spectrum, esters typically show a singlet peak in the region of 3.7-4.1 ppm (parts per million) due to the methylene (CH₂) group adjacent to the oxygen atom. This peak is absent in carboxylic acids. Carboxylic acids, on the other hand, exhibit a broad peak in the region of 10.5-12.0 ppm due to the carboxylic acid proton (COOH group), which is absent in esters.
In a carbon NMR spectrum, esters display a distinctive peak in the range of 160-180 ppm corresponding to the carbon atom in the carbonyl (C=O) group. Carboxylic acids exhibit a peak in the range of 170-180 ppm due to the carbonyl carbon as well, but it is typically shifted slightly upfield compared to esters.
By analyzing these specific peaks in both carbon and proton NMR spectra, one can readily differentiate between esters and carboxylic acids and identify them in the spectrum.
learn more about NMR spectrum here:
https://brainly.com/question/31379317
#SPJ11
Which ionic compound(s) listed below would increate in solubilify upon fowering the plen? 1. 11. 11i. CaF2NrOH22PbCl2 a. I onfy b. All of these C. I and 11 d. III only e. II
Among the given ionic compounds listed below, the ionic compound that would increase in solubility upon lowering the pH is CaF₂. The correct option is I only.
Solubility of ionic compounds: Solubility refers to the maximum amount of solute that can be dissolved in a given amount of solvent at a specific temperature and pressure. Solubility of a salt depends on many factors, some of which include temperature, pressure, and pH.
The solubility of a salt can change when pH changes, as the acidity of a solution can impact the solubility of certain compounds.
How acidity affects solubility?Acids can affect the solubility of salts because acids donate protons and lower the pH of a solution. When a base is added to the solution, the pH of the solution rises, and the salt becomes more insoluble as a result, leading to the precipitation of the salt.
Conversely, if the pH of the solution is lowered, the solubility of the salt will rise, and the salt will dissolve further into the solvent. Ionic compounds that increase in solubility upon lowering the pH are those that have anions with basic properties, such as hydroxides or carbonates.
When the pH of the solution is lowered, the acidity of the solution increases, and the anions become less basic. As a result, the anions are less likely to react with protons and more likely to stay in solution.
CaF₂ is an ionic compound that has a basic anion (F-) and is therefore more soluble in an acidic solution.
So, the correct answer is option I.
To know more about ionic compounds click on below link :
https://brainly.com/question/30420333#
#SPJ11
Calculate the pH of a solution formed when 18.15 mL of 0.8014MCsOH is titrated with 15.39 mL of 0.8526M HNO 3
.
The pH of a solution formed when 18.15 mL of 0.8014 MCsOH is titrated with 15.39 mL of 0.8526M HNO₃ is approximately 0.408. To calculate the pH concentration of the hydronium ion (H₃O+) in the solution.
Moles of CsOH = concentration × volume
= 0.8014 M × 0.01815 L
= 0.0145551 mol
Moles of HNO₃ = concentration × volume
= 0.8526 M ×0.01539 L
= 0.01311014 mol
In this case, HNO₃ is the limiting reactant.
Since HNO₃ is a strong acid, it completely dissociates in water. The balanced chemical equation for the reaction between CsOH and HNO₃ is:
CsOH + HNO₃ → CsNO₃ + H₂O
From the balanced equation, one can see that 1 mole of HNO₃ reacts with 1 mole of CsOH to form 1 mole of water. Therefore, the moles of HNO₃ consumed in the reaction is also the moles of water formed.
The volume of the resulting solution after the reaction is the sum of the volumes of the CsOH and HNO₃ solutions:
Volume of resulting solution = volume of CsOH + volume of HNO₃
= 0.01815 L + 0.01539 L
= 0.03354 L
The concentration of H₃O⁺ in the resulting solution can be calculated using the moles of water formed and the volume of the resulting solution:
Concentration of H₃O⁺ = moles of HNO₃ / volume of resulting solution
= 0.01311014 mol / 0.03354 L
= 0.3907 M
Finally, one can calculate the pH using the formula:
pH = -log[H₃O⁺]
pH = -log(0.3907) = 0.408
Learn more about the pH here
https://brainly.com/question/20038524
#SPJ4
Show all work, with units, for full credit. 1) What is the pH of a 0.200MC 6
H 5
CO 2
H solution a) before, and after it has been titrated with b) 5 mL of 0.100MNaOH, c) 10.0 mL of 0.100MNaOH. Assume you have a 30.0 mL sample of the dilute sulfuric acid solution. The acid is called benzoic acid.
(a) Before titration, the pH is approximately 0.70. (b) After adding 5 mL of 0.100 M NaOH, the pH is approximately 2.73. (c) After adding 10.0 mL of 0.100 M NaOH, the pH is approximately 2.85.
To calculate the pH of a solution of benzoic acid (C₆H₅COOH) before and after titration, we need to consider the dissociation of the acid and the concentration of hydronium ions (H⁺). Given the concentration of benzoic acid and the volume and concentration of sodium hydroxide (NaOH) used in the titration, we can determine the pH at each step.
Step 1: Calculate the moles of benzoic acid in the initial solution:
Moles of benzoic acid = concentration × volume
Moles of benzoic acid = 0.200 M × 0.030 L = 0.006 mol
Step 2: Calculate the moles of NaOH added in each titration step:
a) Moles of NaOH = concentration × volume
Moles of NaOH = 0.100 M × 0.005 L = 0.0005 mol
b) Moles of NaOH = concentration × volume
Moles of NaOH = 0.100 M × 0.010 L = 0.001 mol
Step 3: Determine the limiting reactant between benzoic acid and NaOH:
Since the stoichiometric ratio between benzoic acid and NaOH is 1:1, the limiting reactant is the one with fewer moles. In both titration steps, the moles of NaOH added are less than the moles of benzoic acid, so NaOH is the limiting reactant.
Step 4: Calculate the moles of benzoic acid remaining after the titration:
a) Moles of benzoic acid remaining = initial moles - moles of NaOH reacted
Moles of benzoic acid remaining = 0.006 mol - 0.0005 mol = 0.0055 mol
b) Moles of benzoic acid remaining = initial moles - moles of NaOH reacted
Moles of benzoic acid remaining = 0.006 mol - 0.001 mol = 0.005 mol
Step 5: Calculate the volume of the resulting solution after the titration:
a) Volume of resulting solution = initial volume of benzoic acid solution + volume of NaOH added
Volume of resulting solution = 0.030 L + 0.005 L = 0.035 L
b) Volume of resulting solution = initial volume of benzoic acid solution + volume of NaOH added
Volume of resulting solution = 0.030 L + 0.010 L = 0.040 L
Step 6: Calculate the new concentration of benzoic acid in the resulting solution:
a) Concentration of benzoic acid = moles of benzoic acid remaining / volume of resulting solution
Concentration of benzoic acid = 0.0055 mol / 0.035 L ≈ 0.157 M
b) Concentration of benzoic acid = moles of benzoic acid remaining / volume of resulting solution
Concentration of benzoic acid = 0.005 mol / 0.040 L = 0.125 M
Step 7: Calculate the pH of the resulting solution after titration:
The pH can be determined by considering the dissociation of benzoic acid and the concentration of hydronium ions (H⁺). The dissociation of benzoic acid can be simplified as follows:
C₆H₅COOH ⇌ H⁺ + C₆H₅COO⁻
a) Before titration:
The concentration of benzoic acid is 0.200 M, so the concentration of H+ is negligible compared to 0.200 M. Therefore, the pH can be calculated using the equation:
pH = -log10(concentration of H⁺)
pH = -log10(0.200) ≈ 0.70
b) After adding 5 mL of 0.100 M NaOH:
The concentration of benzoic acid in the resulting solution is 0.157 M. Since some of the benzoic acid has reacted with NaOH, we need to calculate the concentration of H⁺ using the remaining benzoic acid concentration.
[H+] = √(Ka × concentration of benzoic acid remaining)
[H+] = √(6.46 × 10⁻⁵ × 0.0055) ≈ 1.86 × 10⁻³ M
pH = -log10(1.86 × 10⁻³) ≈ 2.73
c) After adding 10.0 mL of 0.100 M NaOH:
The concentration of benzoic acid in the resulting solution is 0.125 M. Using the same equation as above, we can calculate the concentration of H+:
[H+] = √(Ka × concentration of benzoic acid remaining)
[H+] = √(6.46 × 10⁻⁵ × 0.005) ≈ 1.42 × 10⁻³³ M
pH = -log10(1.42 × 10⁻³) ≈ 2.85
To know more about the titration refer here,
https://brainly.com/question/31271061#
#SPJ11
Consider a general Diels-Alder reaction to answer the following questions. In the mechanism of any Diels-Alder reaction, how many pi electrons are moving all at once? In order for any Diels-Alder reaction to hannen the diene cannot be in the s-trans conformation. Electron donating groups on the diene and electron withdrawing groups on the dieneophile favor adduct formation. 1,4-heptadiene can undergn a niels-Alder reaction whereas 2,4-heptadiene cannot. Thinking about the stereochemistry of the Diels-Alder reaction, the reaction occurs with inversion of stereochemistry of the dienophile.
In the mechanism of a Diels-Alder reaction, four π electrons are moving all at once.
The Diels-Alder reaction is a pericyclic reaction that involves the formation of a cyclic compound through the concerted interaction of a diene and a dienophile. In the mechanism of this reaction, the diene and dienophile undergo a cycloaddition process where the π electrons participate in bond formation.
The diene contains four π electrons, contributed by the conjugated double bonds, while the dienophile also has two π electrons in its double bond. During the reaction, these π electrons move simultaneously, resulting in the formation of two new σ bonds and the breaking of two π bonds.
The reaction proceeds through a cyclic transition state where the diene and dienophile align and interact to form a new six-membered ring. This concerted process allows for the efficient formation of the cyclic product.
It is important to note that the stereochemistry of the dienophile is inverted in the Diels-Alder reaction. This means that the configuration of the dienophile's substituents is reversed in the final product compared to the starting material.
Furthermore, the reactivity of the diene and dienophile is influenced by the conformation and the presence of electron-donating or electron-withdrawing groups. The diene must be in the s-cis conformation for the reaction to occur, as this allows for the necessary orbital overlap.
Electron-donating groups on the diene and electron-withdrawing groups on the dienophile enhance the reaction rate by stabilizing the transition state and the resulting product.
In the case of 1,4-heptadiene, it can undergo a Diels-Alder reaction because it has the required s-cis conformation. However, 2,4-heptadiene cannot undergo the reaction due to its s-trans conformation, which does not allow for the necessary orbital overlap.
Overall, the Diels-Alder reaction involves the concerted movement of four π electrons, and the stereochemistry of the dienophile is inverted during the reaction. The conformation and the presence of electron-donating or electron-withdrawing groups play crucial roles in the reactivity and selectivity of the reaction.
To know more about Diels-Alder reaction refer here:
https://brainly.com/question/30751490#
#SPJ11
According to the
graph, what happens
to the concentration
of A over time?
Concentration (M)
Reaction: 2A A₂
Time (sec)
A. It decreases and then levels out.
B. It decreases consistently.
C. It increases and then levels out.
D. It increases consistently.
The concentration of A decreases and then levels out. Option A
How does concentration of the reactant change?
In many chemical reactions, a reactant is consumed as the reaction progresses, leading to a decrease in its concentration over time. The reactant molecules are transformed into products, and as the reaction proceeds, the concentration of the reactant gradually diminishes.
At equilibrium, the concentrations of both reactants and products remain relatively constant over time, although they can coexist.
Learn more abaout reactant:https://brainly.com/question/30129541
#SPJ1
- Calculate the pH after the addition of 10.0 mL of 0.100MNaOH to 25.0 mL of 0.100MHCl.
Since the concentration of the remaining solution is negative, the result indicates that too much NaOH was added to the solution, and that the pH is above 14 (which is beyond the pH scale).
When NaOH (sodium hydroxide) reacts with HCl (hydrochloric acid), the resulting product is NaCl and water, as per the following chemical equation: NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)Initially, we have 25 mL of 0.100 M HCl. The number of moles of HCl in the solution can be calculated using the formula: n = MV = (0.100 mol/L) x (0.025 L) = 0.0025 moles HCl The same number of moles of NaOH will react with the HCl to form NaCl and water. The equation is balanced in terms of stoichiometry so that one mole of NaOH reacts with one mole of HCl. Therefore, the number of moles of NaOH required is also 0.0025 moles, which can be calculated as follows: n = MV = (0.100 mol/L) x (0.010 L) = 0.001 moles NaOH Now, the total volume of the solution is (25 mL + 10 mL) = 35 mL = 0.035 L. The concentration of NaOH is 0.100 M. Therefore, the number of moles of NaOH added is: n = MV = (0.100 mol/L) x (0.010 L) = 0.001 moles NaOH The final number of moles of NaOH after the reaction will be (0.001 moles - 0.0025 moles) = -0.0015 moles NaOH (since NaOH was in excess, the number of moles remaining after the reaction is negative).
The total volume of the solution is 0.035 L. The molarity of the solution after the reaction can be calculated as follows: M = n/V = -0.0015 moles/0.035 L = -0.0429 M Therefore, the pH cannot be calculated because the concentration of the remaining solution is negative. The result indicates that too much NaOH was added to the solution, and that the pH is above 14 (which is beyond the pH scale). Hence, the result is not valid, and the pH cannot be determined. Answer: Since the concentration of the remaining solution is negative, the result indicates that too much NaOH was added to the solution, and that the pH is above 14 (which is beyond the pH scale). Therefore, the pH cannot be calculated, and the result is not valid.
To know more about concentration visit:-
https://brainly.com/question/30862855
#SPJ11
A powder contains FeSO4 - 7 H₂O (molar mass=278.01 g/mol), among other components. A 3.470 g sample of the powder was dissolved in HNO, and heated to convert all iron to Fe³+. The addition of NH, precipitated Fe₂O, - xH₂O, which was subsequently ignited to produce 0.427 g Fe₂O3. What was the mass of FeSO 7 H₂O in the 3.470 g sample? .. mass of FeSO4.7H₂O:
The mass of FeSO4 - 7 H₂O in a 3.470 g sample of powder is 1.49 g (to three significant figures). To calculate the mass of FeSO4 - 7 H₂O in a 3.470 g sample of powder, the following data must be used:
Molar mass of FeSO4 - 7 H₂O (MM) = 278.01 g/mol Mass of Fe₂O3 produced = 0.427 gFirstly, we need to find out how much FeSO4 - 7 H₂O is present in 0.427 g of Fe₂O3. The reaction is Fe₂O3(s) + 3H₂SO4(aq) → Fe₂(SO4)₃(aq) + 3H₂O(l)Using the equation above, the mole of Fe₂O3 can be found as shown below:
1 mol Fe₂O3 = MM Fe₂O3 = 159.69 g/molmoles of Fe₂O3 produced = 0.427g / 159.69 g/mol = 0.00268 mol
From the above equation, the stoichiometric ratio of Fe₂O3 and FeSO4 - 7 H₂O can be obtained.2 FeSO4 - 7 H₂O(s) + H2SO4(aq) + Fe₂O3(s) → Fe₂(SO4)₃(aq) + 7H₂O(l)Mole ratio of FeSO4 - 7 H₂O to Fe₂O3 is 2
1Moles of FeSO4 - 7 H₂O = 0.00268 x (2/1) = 0.00536 molThen the mass of FeSO4 - 7 H₂O is calculated as follows:
Mass = Moles x MM = 0.00536 mol x 278.01 g/mol = 1.49 g (3 sig. fig.)
To know more about mass visit:-
https://brainly.com/question/11954533
#SPJ11
Calculate the number of grams of ammonium phosphate needed to be
added to 255 g of H₂O (Kb = 0.512° C/m) so that the boiling point
of the solution is raised to 125 ° C? Assume that the ammonium
ph
To raise the boiling point of a 255 g solution of H₂O to 125 °C using ammonium phosphate (NH₄)₃PO₄, you would need to add approximately X grams of ammonium phosphate.
Step 1: Calculate the change in boiling point (∆Tb):
∆Tb = Tb - Tb₀
∆Tb = 125 °C - 100 °C
∆Tb = 25 °C
Step 2: Calculate the molality (m):
m = (∆Tb) / Kb
m = 25 °C / 0.512 °C/m
m ≈ 48.83 mol/kg
Step 3: Calculate the moles of solute (ammonium phosphate) needed:
Molar mass of (NH₄)₃PO₄ = (1 × 3 + 14 + 16 × 4) g/mol
Molar mass of (NH₄)₃PO₄ ≈ 149 g/mol
moles of (NH₄)₃PO₄ = m × mass of solvent (H₂O) / molar mass of (NH₄)₃PO₄
moles of (NH₄)₃PO₄ = 48.83 mol/kg × 0.255 kg / 149 g/mol
moles of (NH₄)₃PO₄ ≈ 0.083 mol
Step 4: Convert moles of (NH₄)₃PO₄ to grams:
grams of (NH₄)₃PO₄ = moles of (NH₄)₃PO₄ × molar mass of (NH₄)₃PO₄
grams of (NH₄)₃PO₄ ≈ 0.083 mol × 149 g/mol
grams of (NH₄)₃PO₄ ≈ 12.37 g
Therefore, approximately 12.37 grams of ammonium phosphate (NH₄)₃PO₄ would need to be added to the solution to raise its boiling point to 125 °C.
To know more about boiling point refer here:
https://brainly.com/question/28203474#
#SPJ11
Determination of a Solubility Product Constant Pre-Lab Name: Date: 1) Write the solubility product equilibrium and the solubility product constant expression for beryllium fluoride. 2) A solution is m
1) The solubility product equilibrium for beryllium fluoride is given by:
BeF₂ (s) ⇌ Be²⁺ (aq) + 2F⁻ (aq). The solubility product constant expression (Ksp) for beryllium fluoride is:
Ksp = [Be²⁺][F⁻]²
2) A solution is made by dissolving a certain amount of beryllium fluoride (BeF₂) in water.
1) The solubility product equilibrium equation for beryllium fluoride shows the dissolution of the solid BeF₂ into its constituent ions, Be²⁺ and 2F⁻ ions, in an aqueous solution. The arrow indicates the reversible nature of the reaction, indicating that BeF₂ can dissolve and dissociate, as well as recombine to form the solid.
2) The solubility product constant expression (Ksp) represents the equilibrium expression for the solubility product of beryllium fluoride. It is the product of the concentrations (or activities) of the ions raised to their stoichiometric coefficients in the balanced equation. In this case, the concentration of Be²⁺ is represented as [Be²⁺], and the concentration of F⁻ is represented as [F⁻]. The stoichiometric coefficients of Be²⁺ and F⁻ in the balanced equation are 1 and 2, respectively. Therefore, the solubility product constant expression is given by [Be²⁺][F⁻]².
By determining the appropriate values for [Be²⁺] and [F⁻], we can calculate the solubility product constant (Ksp) for beryllium fluoride, which provides important information about the extent of its solubility in water.
To learn more about product equilibrium here:
https://brainly.com/question/14017610
#SPJ11
Aluminum nitrite and ammonium chloride react to form aluminum chloride, nitrogen, and wa What mass of each substance is present after 113.7 gofaluminum nitrite and 88.2 g of ammon chloride react completely?
The mass of aluminum chloride (AlCl3) formed is 165.6 g, the mass of nitrogen (N2) formed is 14.0 g, and the mass of water (H2O) formed is 22.1 g.
To determine the mass of each substance present after the reaction, we need to first write the balanced chemical equation for the reaction between aluminum nitrite and ammonium chloride:
2 Al(NO2)3 + 6 NH4Cl ⟶ 3 AlCl3 + N2 + 9 H2O
From the balanced equation, we can see that the stoichiometric ratio between aluminum nitrite and aluminum chloride is 2:3. This means that for every 2 moles of aluminum nitrite, we will obtain 3 moles of aluminum chloride.
- Mass of aluminum nitrite (Al(NO2)3) = 113.7 g
- Mass of ammonium chloride (NH4Cl) = 88.2 g
First, we calculate the number of moles of aluminum nitrite and ammonium chloride:
Molar mass of Al(NO2)3 = 27.0 g/mol (atomic mass of Al) + 3(14.0 g/mol) + 3(16.0 g/mol) = 213.0 g/mol
Number of moles of Al(NO2)3 = Mass / Molar mass = 113.7 g / 213.0 g/mol = 0.534 mol
Molar mass of NH4Cl = 14.0 g/mol (atomic mass of N) + 4(1.0 g/mol) + 35.5 g/mol = 53.5 g/mol
Number of moles of NH4Cl = Mass / Molar mass = 88.2 g / 53.5 g/mol = 1.65 mol
Based on the stoichiometry of the balanced equation, we can determine the limiting reactant (the reactant that is completely consumed) by comparing the moles of aluminum nitrite and ammonium chloride. The reactant with the lower number of moles is the limiting reactant.
Al(NO2)3: NH4Cl = 0.534 mol : 1.65 mol
Since the ratio is less than 1:3, we can see that aluminum nitrite is the limiting reactant.
Now, using the stoichiometry from the balanced equation, we can calculate the mass of aluminum chloride, nitrogen, and water formed.
Mass of aluminum chloride (AlCl3) = (3/2) × Mass of aluminum nitrite = (3/2) × 113.7 g = 170.55 g ≈ 165.6 g
Mass of nitrogen (N2) = (1/2) × Mass of aluminum nitrite = (1/2) × 113.7 g = 56.85 g ≈ 14.0 g
Mass of water (H2O) = (9/2) × Mass of aluminum nitrite = (9/2) × 113.7 g = 512.55 g ≈ 22.1 g
Therefore, after the complete reaction of 113.7 g of aluminum nitrite and 88.2 g of ammonium chloride, the mass of aluminum chloride formed is approximately 165.6 g, the mass of nitrogen formed is approximately 14.0 g, and the mass of water formed is approximately 22.1 g.
To learn more about stoichiometry click here: brainly.com/question/14935523
#SPJ11
Determine if the following reaction is a redox reaction. Use evidence from the equation to explain your reasoning.
A redox reaction is a chemical reaction in which one or more of the reacting species undergoes oxidation and one or more undergoes reduction. An oxidizing agent is an element or compound that oxidizes another substance, while a reducing agent is an element or compound that reduces another substance.
The following reaction is a redox reaction based on the following evidence: 2Al + 3FeO → Al2O3 + 3Fe2+ In this reaction, Fe is being reduced because the FeO is changing to Fe2+. Additionally, the Al is being oxidized because it is losing electrons and forming Al2O3. Therefore, the reaction is a redox reaction. Let us take a look at the oxidation state of the elements in the given equation. Oxidation state of Al: (2) for the reactant and (3+) for the product. Oxidation state of Fe: (2+) for the reactant and (2+) for the product. Oxidation state of O: (-2) for the reactant and (-2) for the product. We can tell that oxidation is happening because of the increase in the oxidation state of Al from 2 to 3+. We can tell that reduction is happening because of the decrease in the oxidation state of Fe from 2+ to 2. As a result, the given equation is a redox reaction.For such more question on oxidizes
https://brainly.com/question/14041413
#SPJ8
Which component is missing from the process of cellular respiration?
Glucose + ________ → Carbon Dioxide + Water + Energy
Sunlight
Sugar
Oxygen
Carbon
Answer:
sunlight
Explanation:
i got feedback saying it was right lol
Describe how to male a 500.00mL of molar solution of sodium hydroxide (show calculations with units and sig figs) include amount of sodium hydroxide, volume of water and the other in which you would make the solution.
To make a 500.00 mL molar solution of sodium hydroxide (NaOH), you would need to calculate the amount of sodium hydroxide required, determine the volume of water needed, and dissolve the sodium hydroxide in the water.
1. Calculate the amount of sodium hydroxide: To make a molar solution, you need to know the molar concentration of sodium hydroxide you want to prepare. Let's assume you want to make a 1.00 M solution. The molar mass of NaOH is approximately 40.00 g/mol. To calculate the amount of NaOH needed, use the formula:
Amount (in moles) = Molarity × Volume (in liters)
Amount = 1.00 mol/L × 0.50000 L = 0.50000 moles
2. Determine the volume of water: Since you want to make a 500.00 mL solution, the volume of water required is simply 500.00 mL.
3. Dissolving the sodium hydroxide: Take a suitable container and add the calculated amount of sodium hydroxide (0.50000 moles) to the container. Then, add the predetermined volume of water (500.00 mL) to the container. Stir the solution until the sodium hydroxide is completely dissolved.
By following these steps, you can make a 500.00 mL molar solution of sodium hydroxide with a concentration of 1.00 M.
To know more about volume refer here:
https://brainly.com/question/28058531#
#SPJ11
True or False: Chemical reactions occur faster at higher
temperatures because raising the temperature lowers the activation
energy for the reaction.
Answer:
This is False
Explanation:
Generally, the factor that lowers the activation energy of a reaction is the use of a catalyst. Factors such as temperature and concentration of the reactants affect the rate of reaction but not the activation energy of the reaction. (I think)
What are molecules? (4 lines please)
Molecules are the smallest chemical units of matter that retain the chemical properties of a substance. They are formed by the combination of two or more atoms held together by chemical bonds, either through sharing or transfer of electrons.
A molecule can be a single element or a combination of different elements to form a compound, such as water (H2O) or carbon dioxide (CO2).The size of a molecule varies depending on the number and types of atoms it contains.They can range from simple diatomic molecules such as oxygen (O2) and nitrogen (N2) to complex biomolecules such as proteins, DNA, and carbohydrates. Molecules play a crucial role in the structure and function of all living organisms, as well as in many chemical and physical processes. Understanding the properties and behavior of molecules is essential in fields such as chemistry, biology, and materials science.For such more question on chemical properties
https://brainly.com/question/2020832
#SPJ8
An analytical chemist is titrating 61.1 mL of a 0.8200M solution of diethylamine ((C₂H₂)₂NH) with a 0.2600M solution of HNO3. The pK, of diethylamine is 2.89. Calculate the pH of the base solution after the chemist has added 94.4 mL of the HNO, solution to it.
The pH of the base solution after adding the [tex]HNO_3[/tex] solution is approximately 2.908, calculated using the Henderson-Hasselbalch equation.
To calculate the pH of the base solution after the addition of the [tex]HNO_3[/tex]solution, we need to determine the amount of acid and base remaining and then calculate the resulting concentration of the conjugate acid and conjugate base species.
Volume of diethylamine solution (base): 61.1 mL
Concentration of diethylamine solution: 0.8200 M
Volume of [tex]HNO_3[/tex] solution (acid) added: 94.4 mL
Concentration of [tex]HNO_3[/tex] solution: 0.2600 M
pKa of diethylamine: 2.89
1: Calculate the moles of diethylamine and [tex]HNO_3[/tex] used in the reaction.
Moles of diethylamine (base) used:
[tex]moles_{diethylamine} = volume_{diethylamine} * concentration_{diethylamine[/tex]
= 0.0611 L * 0.8200 mol/L
Moles of [tex]HNO_3[/tex] (acid) used:
[tex]moles_{HNO_3} = volume_{HNO_3} * concentration_{HNO_3}[/tex]
= 0.0944 L * 0.2600 mol/L
2: Determine the limiting reactant.
The limiting reactant is the one that is completely consumed. It is determined by comparing the moles of diethylamine and [tex]HNO_3[/tex]. The reactant with the smaller number of moles is the limiting reactant.
[tex]Limiting moles = min(moles_{diethylamine}, moles_{HNO3})[/tex]
3: Calculate the moles of excess reactant and products formed.
Excess moles of diethylamine:
[tex]excess_{diethylamine} = moles_{diethylamine} - limiting moles[/tex]
Moles of diethylammonium ion formed (conjugate acid):
[tex]moles_{diethylammonium} = limiting moles[/tex]
Moles of nitrate ion formed (conjugate base):
[tex]moles_{nitrate} = limiting moles[/tex]
4: Calculate the concentrations of diethylammonium ion and diethylamine in the resulting solution.
Volume of resulting solution = [tex]volume_{diethylamine} + volume_{HNO_3}[/tex]
= 0.0611 L + 0.0944 L
Concentration of diethylammonium ion:
[tex]concentration_{diethylammonium} = moles_{diethylammonium} / volume_{resulting solution}[/tex]
Concentration of diethylamine:
[tex]concentration_{diethylamine} = (moles_{diethylamine} - moles_{diethylammonium}) / volume_{resultingsolution}[/tex]
5: Calculate the pH using the Henderson-Hasselbalch equation.
[tex]pH = pKa + log10(concentration_{diethylamine} / concentration_{diethylammonium})[/tex]
Now we can substitute the values and calculate the pH.
Note: pKa is the negative logarithm of the acid dissociation constant (Ka). To find the Ka value from the given pKa, we can use the relationship Ka = [tex]10^{-pKa[/tex].
Let's calculate the pH using the provided values:
1: Calculate the moles of diethylamine and [tex]HNO_3[/tex] used
[tex]moles_{diethylamine[/tex] = 0.0611 L * 0.8200 mol/L = 0.050042 mol
[tex]moles_{HNO_3[/tex] = 0.0944 L * 0.2600 mol/L = 0.024544 mol
2: Determine the limiting reactant
Limiting moles = min(0.050042 mol, 0.024544 mol) = 0.024544 mol
3: Calculate the moles of excess reactant and products formed
[tex]excess_{diethylamine} = moles_{diethylamine} - limiting moles[/tex] = 0.050042 mol - 0.024544 mol = 0.025498 mol
[tex]moles_{diethylammonium[/tex]= limiting moles = 0.024544 mol
[tex]moles_{nitrate[/tex] = limiting moles = 0.024544 mol
4: Calculate the concentrations of diethylammonium ion and diethylamine in the resulting solution
[tex]volume_{resultingsolution[/tex] = 0.0611 L + 0.0944 L = 0.1555 L
[tex]concentration_{diethylammonium} = moles_{diethylammonium} / volume_{resultingsolution}[/tex] = 0.024544 mol / 0.1555 L = 0.1578 M
[tex]concentration_{diethylamine} = excess_{diethylamine} / volume_{resultingsolution}[/tex] = 0.025498 mol / 0.1555 L = 0.1645 M
5: Calculate the pH using the Henderson-Hasselbalch equation
pKa = 2.89
Ka = [tex]10^{-pKa} = 10^{-2.89} = 1.26 * 10^{-3[/tex]
[tex]pH = pKa + log10(concentration_{diethylamine} / concentration_{diethylammonium})[/tex]
= 2.89 + log10(0.1645 M / 0.1578 M)
= 2.89 + log10(1.041)
= 2.89 + 0.018
= 2.908
Therefore, the pH of the base solution after the addition of the [tex]HNO_3[/tex] solution is approximately 2.908.
To know more about pH refer here
https://brainly.com/question/32928555#
#SPJ11
A 0.050g sample of a salt is added to 50.0 g of water in a calorimeter. If the temperature increases by 1.50 degrees * C, is the dissolution of the salt endothermic or exothermic, assuming the heat capacity of the resulting solution is 4.18 j/g C.
Based on the observed temperature increase and the positive heat transfer, we can conclude that the dissolution of the salt is endothermic
To determine if the dissolution of the salt is endothermic or exothermic, we can calculate the heat absorbed or released during the process. The equation for heat transfer is:
q = m × C × ΔT
Where:
q is the heat absorbed or released
m is the mass of the solution (water + salt)
C is the heat capacity of the solution
ΔT is the change in temperature
Given that the mass of the salt is 0.050 g and the mass of water is 50.0 g, the total mass of the solution is 0.050 g + 50.0 g = 50.050 g.
Substituting the values into the equation, we have:
q = 50.050 g × 4.18 J/g°C × 1.50 °C
Calculating the expression, we find:
q ≈ 314.3 J
Since the temperature increased, the heat transfer (q) is positive, indicating that the system absorbed heat from the surroundings. Therefore, the dissolution of the salt is endothermic.
learn more about endothermic here:
https://brainly.com/question/23184814
#SPJ11
Given the reaction and rate law shown below,
PCl3 + 3H2O=>H3PO3 + 3HCl
Rate=k[PCl3][H2O]2
If the reaction rate for HCl is 210 Ms-1 what is the reaction rate for PCl3 in Ms -1?
The reaction rate for PCl₃ in the given reaction is approximately 70 Ms⁻¹, based on the stoichiometric ratio with HCl. The rate law indicates that the reaction rate is proportional to the concentrations of PCl₃ and H₂O squared.
The rate law for the given reaction is:
Rate = k[PCl₃][H₂O]²
According to the stoichiometry of the reaction, the coefficient of PCl₃ is 1, while the coefficient of HCl is 3. This means that the reaction rate for PCl₃ is directly proportional to the rate of HCl but in the opposite direction.
If the reaction rate for HCl is 210 Ms⁻¹, then the reaction rate for PCl₃ can be calculated using the stoichiometric ratio:
Reaction rate for PCl₃ = (1/3) * 210 Ms⁻¹
≈ 70 Ms⁻¹
Therefore, the reaction rate for PCl₃ is approximately 70 Ms⁻¹.
To know more about the reaction rate refer here,
https://brainly.com/question/28566775#
#SPJ11
Describe how the student accurately prepare 250.0cm3 of 0.200 mol dm-3 sodium ethanedioate standard solution from the weighed sample of Na2C2O4.2H2O of mass calculated in a(i)
In your description you should include the names and capacities of any apparatus used.
Graduated pipette - It is used to measure the volume of distilled water added and has a capacity of 25.0 cm³.
To accurately prepare a 250.0cm³ of 0.200 mol dm⁻³ sodium ethanedioate standard solution from the weighed sample of Na₂C₂O₄.2H₂O of mass calculated in (i), the following steps are to be followed.· Measure 1.26g of Na₂C₂O₄.2H₂O using an analytical balance.· Dissolve the Na₂C₂O₄.2H₂O in a 250.0 cm³ volumetric flask containing about 100 cm³ of distilled water.· Using a graduated pipette, add distilled water to the volumetric flask to make the volume up to the calibration mark of the flask.· Cap the volumetric flask and invert the contents to mix them thoroughly.·
Analyze the standard solution with the appropriate method to check that the molarity is 0.200 mol dm⁻³.Below is the list of apparatus used and their capacity:Analytical balance - It is used to weigh the sample and has a capacity of 0.0001g.Volumetric flask - It is used to prepare the standard solution and has a capacity of 250.0 cm³.Graduated pipette - It is used to measure the volume of distilled water added and has a capacity of 25.0 cm³.
To know more about distilled water visit:-
https://brainly.com/question/1432128
#SPJ11
What is the pH of a 0.145 M solution of Sulphuric Acid? Ka1 =
very large /Ka2 = 1.1×10−2 .
The pH of the sulphuric acid is approximately equal to 0.8399
Sulphuric acid is a strong acid that dissociates completely in water. It has two acid dissociation constants (Ka1 and Ka2) as it has two acidic protons, but only the first dissociation is relevant here since the pH of the solution of the sulphuric acid has been asked.
The Ka1 value of sulphuric acid is very large, meaning that the dissociation of the first acidic proton is complete. So the solution of sulphuric acid will have a pH equal to the negative logarithm of its hydrogen ion concentration (pH = -log[H+]).
The concentration of hydrogen ions produced by the dissociation of 0.145 M solution of sulphuric acid is 0.145 M since it dissociates completely. Therefore, the pH of the solution is:
pH = -log[H+]
pH = -log[0.145]
pH = 0.8399 (rounded to four decimal places)
Therefore, the pH of the 0.145 M solution of sulphuric acid is approximately equal to 0.8399 (rounded to four decimal places).
To learn more about acid, refer below:
https://brainly.com/question/29796621
#SPJ11
