Does sodium and oxygen form an ionic bond?

Standard enthalpy of formation for diamonds is 1.9kJ/mol .

Enthalpy of formation of any compound is defined as the amount of energy required to form 1 mole of compound.Enthalpy of formation is usually represented as ΔHf. If the enthalpy of combustion of two reactions is given, then enthalpy of combustion of the overall reaction can be calculated with the help of Hess's Law.

Given Reactions are:-

C(graphite) + O2(g) → CO2(g)  AH°₁= --393.5 kJ/mol C

C(diamond) + O2(g) → CO2(g)

On reversing the second equation:

CO2(g) →  C(diamond) + O2(g) => AH° =-395.4 kJ/mol

C(graphite) →  C(diamond)

AH°(overall) = AH°₁ + AH° =  --393.5 kJ/mol C +-395.4 kJ/mol =               1.9kJ/mol

To know more about Hess's Law:

brainly.com/question/3393755

#SPJ4

A homogeneous mixture is one that has a consistent chemical make-up. Homogeneous mixtures have only one phase, according to their definition, composition, and characteristics.

Examples. A combination with a uniform composition is said to be homogenous. Because the particles are distributed evenly, these mixtures have a consistent composition. There is only one phase to them. They are made up of molecular or atomic level ingredients and do not divide into layers. In colloquial words, homogeneous mixes are frequently referred to as solutions. The example that follows is one of the simplest. dissolve sugar in water. A homogenous mixture is a combination of ingredients combined so thoroughly that the separate ingredients are invisible. There will be the identical amounts of each ingredient in every sample of the mixture. Mixtures that are homogeneous can be solid, liquid, or gaseous.

Learn more about  homogeneous mixture here

https://brainly.com/question/24898889

#SPJ4

Met-Ser-Ser-Leu-Ser-Leu amino acid sequence will be generated, based on 5' AUG-UCU-UCG-UUA-UCC-UUG 3' mRNA codon sequence.

mRNA have triplet codons and each triplet codon codes for an amino acid. An amino acid can be coded by many triplet codons but one amino acid can only code for a single amino acid.  

AUG is a start codon that codes for initiator amino acid called methionine. Serine can be coded by UCU, UCC, UCA, UGC, AGU, AGC triplet codon. leucine can be coded by UUA, UUG, CUU, CUC, CUA, CUG.

So the codon sequence 5' AUG-UCU-UCG-UUA-UCC-UUG 3' will generate Met-Ser-Ser-Leu-Ser-Leu amino acid sequence.

To learn more about mRNA codon sequence visit here ; https://brainly.com/question/12685080?referrer=searchResults

#SPJ4

Equilibrium pressure of NO2 (g) is 0.3604. This is calculated from the expression of equilibrium constant.

Dinitrogen tetroxide in its liquid state was used as one of the fuels on the lunar lander. Decomposition of gaseous nitrogen dioxide ,

N2O+ (g)  ---> 2NO2 (g)

chemical equilibrium is the state in which both the reactants and products are present in concentrations which have no further tendency to change with time. For this equilibrium reaction, equilibrium constant can be represented as

K(eq.) = concentration of product / concentration of reactant

In gaseous phase we consider the presence  of the molecule ,

 Kp = [NO2] / [N2O4]

where, Kp = equilibrium constant that equals to 0.133

            [N2O4] = Presence of N2O4 at equilibrium that equals to 2.71.

Putting the values in the expression of equilibrium constant,

0.133 = [NO2]2 / 2.71

[NO2]2 = 0.133 * 2.71

             = 0.3604

To learn more about Equilibrium constant please visit:

https://brainly.com/question/3159758

#SPJ4

The response that is true from the above statements are the one stating that the carbohydrates have different properties because they have different arrangements of carbon, hydrogen, and oxygen atoms.

what are structural formulas?

A chemical compound's structural formula provides a visual depiction of the molecular structure (as established by structural chemistry techniques), indicating how the atoms might be organized in actual three-dimensional space. Additionally, either directly or implicitly, the chemical bonding inside the molecule is demonstrated. Structural formulas offer a more thorough geometric depiction of the molecular structure than other forms of chemical formulas,[a] which are only able to use a small number of symbols and have limited descriptive ability.

All three of these monosaccharides—glucose, galactose, and fructose—have the same chemical formula (C6H12O6), but because of the varied arrangements of functional groups around the asymmetric carbon, they differ structurally and chemically (and are referred to as isomers).

Hence the response that is true from the above statements are the one stating that the carbohydrates have different properties because they have different arrangements of carbon, hydrogen, and oxygen atoms.

To know more about structural formulas from the given link

https://brainly.com/question/514499

#SPJ4

The atom of the element must have about three valence electrons.

We define the ionization energy as the energy that we have to supply to the atom of the element so that the atom can be able to loose electrons. Now if the electrons that we are about to loose is the first electron that is to be lost from the atom then we can talk about the first ionization energy.

In practical terms however, we can be able to loose all of the electrons that are present in the inside of the atom but this is going to take up a lot of energy and this where this question becomes quite important.

If we survey the values of the ionization energy that we have been given, we can see that after the third value of the ionization energy, there is an unprecedented jump in the value of the ionization energy.

The implication of this is that the fourth electron is in an inner shell that requires a much higher energy to be removed from the atom.

Learn more about ionization energy:https://brainly.com/question/28385102

#SPJ1

Missing parts;

Examine the following set of ionization energy values for a certain element. How many valence electrons does an atom of the neutral element possess? Ionization step - Ionization energy (kJ/mol) IE1 - 1012 IE2 - 1903 IE3 - 2912 IE4 - 4956 IE5 - 6273 IE6 - 22233 IE7 - 25997 IE8 - 27575 Express your answer numerically as an integer.

Answer:

281 g KClO₃

Explanation:

To find the mass of potassium chlorate (KClO₃), you need to

(1) calculate the number of moles O₂ (using the Ideal Gas Law)

(2) create a balanced equation involving KClO₃ and O₂

(3) convert moles O₂ to moles KClO₃ (using mole-to-mole ratio from balanced equation)

(4) convert moles KClO₃ to grams (using the molar mass of KClO₃)

It is important to arrange the ratios/conversions in a way that allows for the cancellation of units. The final answer should have 3 sig figs like the given values.

(Step 1)

To find the amount of moles O₂, you need to use the Ideal Gas Law equation:

PV = nRT

In this equation,

-----> P = pressure (atm)

-----> V = volume (L)

-----> n = number of moles

-----> R = Ideal Gas Constant (0.08206 atm*L/mol*K)

-----> T = temperature (K)

You can plug the given values into the equation and simplify to solve for "n".

P = 0.720 atm                    R = 0.08206 atm*L/mol*K

V = 114.0 L                          T = 291 K

n = ? moles

PV = nRT                                                      <----- Ideal Gas Law Equation

(0.720 atm)(114.0 L) = n(0.08206 atm*L/mol*K)(291 K)      <----- Insert values

82.08 atm*L = n(23.879 atm*L/mol)           <----- Simplify both sides (multiply)

3.44 moles = n                                            <----- Divide both sides by 23.879

(Step 2)

Unbalanced Equation: KClO₃ (s) -----> KCl (s) + O₂ (g)

Reactants: 1 potassium, 1 chlorine, 3 oxygen

Products: 1 potassium, 1 chlorine, 2 oxygen

As you can see, the amount of each type of atom is not identical on both sides of the reaction. To balance the equation, you can add coefficients in front of particular molecules/elements to alter the amount of each atom type.

Balanced Equation: 2 KClO₃ (s) -----> 2 KCl (s) + 3 O₂ (g)

Reactants: 2 potassium, 2 chlorine, 6 oxygen

Products: 2 potassium, 2 chlorine, 6 oxygen

(Step 3 + 4)

Atomic Mass (K): 39.098 g/mol

Atomic Mass (Cl): 35.453 g/mol

Atomic Mass (O): 15.999 g/mol

Molar Mass (KClO₃): 39.098 g/mol + 35.453 g/mol + 3(15.999 g/mol) = 122.548 g/mol

3.44 moles O₂           2 moles KClO₃            122.548 g
------------------------  x  -------------------------  x  -----------------------  =  281 g KClO₃
                                      3 moles O₂             1 mole KClO₃

According to the bronsted-lowry definitions of acids and bases, a acid is a substance that when a basic substance gains a proton, it forms an acid called the conjugate acid of a base.

According to the Bronsted-Lowry scheme a substance can function as an acid only in the presence of a base; similarly, a substance can function as a base only in the presence of an acid. Furthermore, when an acidic substance loses a proton, it forms a base, called the conjugate base of an acid, and when a basic substance gains a proton, it forms an acid called the conjugate acid of a base. Thus, the reaction between an acidic substance, such as hydrochloric acid, and a basic substance, such as ammonia, may be represented by the equation:

HCL + [tex]NH_{3}[/tex] ⇔ [tex]NH_{4}^{+} + Cl^{-}[/tex]

In the equation the ammonium ion (NH⁺4 ) is the acid conjugate to the base ammonia, and the chloride ion (Cl-) is the base conjugate to hydrochloric acid.

Bronsted-Lowry theory, also called proton theory of acids and bases, a theory, introduced independently in 1923 by the chemist Johannes Nicolaus Bronsted and the English chemist Thomas Martin Lowry, stating that any compound that can transfer a proton to any other compound is an acid, and the compound that accepts the proton is a base. A proton is a nuclear particle with a unit positive electrical charge; it is represented by the symbol H+ because it constitutes the nucleus of a hydrogen atom.

To learn more about Bronsted-Lowry theory visit here ; https://brainly.com/question/27724955?referrer=searchResults

#SPJ4

146.35 × 10²³ Mg atoms make up 1 mole of magnesium oxide.

The 11 moles' total amount of sodium chloride is 6.62*10²⁴ NaCl.

The amount of atoms in 591 g of gold is 1.81*10²⁴.

A)   Avogadro's number and molecular weight have been used to calculate the number of atoms in a mole of a molecule. The constant that the number provided was the Avogadro number. 6.023 × 10²³.

The following sources provide the relationship between the atoms and the mole:

1 mole = 6.023 × 10²³ atoms.

As a result, the Avogadro number was equal to the number of atoms in 1 mole of magnesium oxide.

Thus, 1 mole of MgO has 6.023 ×10²³  atoms.

The atoms of Mg may be calculated from the mass of one magnesium molecule in the chemical MgO, which is given by:

Mg atoms = Mass of Mg × Avogadro number

Mg atoms = 24.3g × 6.023 × 10²³

Mg atoms = 146.35 × 10²³

146.35× 10²³ Mg atoms make up 1 mole of magnesium oxide.

B)  Experimentally, it has been determined that Avogadro's constant is roughly equal to 6.022 × 10²³ mol⁻¹.

Given, the quantity of NaCl in moles=  11.0 mol

The sodium chloride's molar mass= 23 +  35.5 = 58.5 g/mol

NaCl has formula units in a mole.=  6.022 × 10²³

11 moles of NaCl have formula units of NaCl after that. = 11 × 6.022 × 10²³

                                                                                         =  6.62 × 10²⁴ NaCl

11 moles of sodium chloride contain 6.62*10²⁴ formula units of sodium chloride.

C)   The premise of Avogadro's hypothesis

According to Avogadro's theory,

1 mole of Gold = 6.02×10²³ atoms

But

1 mole of gold = 197 g

Thus,

197 g of gold = 6.02×10²³ atoms

How to calculate the number of atoms in 591 g of gold

197 g of gold = 6.02×10²³ atoms

Therefore,

591 g of gold = (591 × 6.02×10²³) / 197

591 g of gold = 1.81×10²⁴ atoms

In 591 g of gold, there are 1.81*10²⁴ atoms.

Learn more about  atoms here:

https://brainly.com/question/13981855

#SPJ4

Whenever one or more compounds undergo a chemical reaction, it's critical to keep in include in fundamental principles:To break bonds, energy is required.Bond formation results in the release of energy.When bonds are created in the products of exothermic processes, more energy is produced than is required to break the links between the reactants.

Because bonds have stable low-energy arrangements, energy is released as bonds form, bringing the energy level of joining atoms to a regional minimum.

The contemporary understanding of chemical processes states that in order for atoms inside the reactants to reassemble into products, bonds between their atoms must be broken.When bonds are broken, energy is absorbed, and when bonds are formed, energy is evolved.

To know more about chemical reactions visit:

https://brainly.com/question/29039149

#SPJ4

2H3PO4 + 3Ca(OH)2 â Ca3(PO4)2 + 6H2O is the correct answer.

When a robust acid reacts with a robust base the consequent salt is neither acidic nor primary in nature i.e. it is neutral. for instance while HCl (Hydrochloric acid), a strong acid, reacts with NaOH, a robust base, the resulting salt is sodium chloride and water.

To neutralize acids, a vulnerable base is used. Bases have a bitter or astringent taste and a pH more than 7.  Bases are neutralized with the aid of the use of a susceptible acid.

Including a base decreases the attention of H3O+ ions within the solution. If a base is brought to an acidic solution, the solution will become much less acidic and movements in the direction of the middle of the pH scale.

Learn more about neutralization reaction here:- https://brainly.com/question/23008798

#SPJ4

Here some examples of gas matter in my home :

Learn more about Natural Gas refer to :

https://brainly.com/question/20934447

#SPJ4

The following compounds have a structure that is somewhat ambiguous, but you can estimate the bond angles around the core atom with confidence.

The center atom in a molecular formula is often the element with lowest symbol and the largest bonding potential. The least electronegative element is normally the central atom when all the atoms typically make the same number of bonds.

Protons, electrons, and neutrons are the three basic types of particles that make up an atom. Protons and neutrons roughly share the same mass, however the mass of an electron is quite small. An antiproton has no charge, a neutron carries a positive charge.

To know more about atoms visit:

https://brainly.com/question/13654549

#SPJ4

The peaks to specific carbon for the nmr spectrum of the r-carvone reactant are:

Carbons a and j: 15.65 and 20.46ppm

Carbons b and i: 42.41ppm

Carbon c: 144.64ppm

Carbon e: 199.57ppm

Carbons d and f: 110.43pppm

Carbon g: 31.18

Carbon h: 132.27ppm

What is ccarbon?

To know more about carbon, click the link given below:

https://brainly.com/question/132329

#SPJ4

The enthalpy changes occurrence is  53.35 kJ.

What is enthalpy?

Enthalpy is a property or state function that is similar to energy; it has dimensions similar to energy (and is thus measured in units of joules or ergs), and its value is solely dependent on the temperature, pressure, and composition of the system, rather than on its history.                            

What is bond?

In molecules, atoms are joined by chemical bonds. Atomic nuclei with positive charges interact with electrons with negative charges to form bonds (the positions of which in space are determined by quantum mechanics)

1 mole of steam = 18.00g H2O

There are five stages to this problem

a] cooling steam from 140.0C to 100C

b] latent heat [heat of vaporisation] in turning steam at 100C to water at 100C

c] cooling water at 100C to 0C

d] using latent heat of fusion to turn water at 0C to ice at 0C

e] cooling ice from 0C to -55C

you just add up each stage

eg stage 1 is M x C x temp difference = 18 x 2.01 x (140-100) Joules

Unfortunately the data heat capacity of water, ltent heat vaporisation and latent heat fusion are not given, and it is impossible to do this without that data.

you just add up each stage

eg stage 1 is M x C x temp difference = 18 x 2.01 x (140-100) Joules

1 mole of steam = 18.00g H2O

18 x 2.01x(140-100) + 2260x18 + 2x100x18 + 334x18 + 2 x 45x18

= 53.35 kJ

Therefore, the enthalpy changes occurrence is  53.35 kJ.

Learn more about enthalpy from the given link.

https://brainly.com/question/16985375

#SPJ1

pH of a solution measures the acidity of a solution. pH of water can be determined with the help of pH meter or litmus paper. Pure water has a pH of 7.

In chemistry, the pH scale is used to define the acidity or basicity of an aqueous solution. Historically, pH stood for "potential of hydrogen." The pH values of acidic solutions are typically lower than those of basic or alkaline solutions.

Equipment called a pH meter detects the activity of hydrogen ions in solutions or the acidity or alkalinity of a solution.

A combination of several colors taken from lichens and made water-soluble is known as litmus. One of the earliest kinds of pH indicators, used to assess the acidity of materials, is frequently produced by its absorption onto filter paper.

For more information on pH kindly visit to

https://brainly.com/question/13213888

#SPJ4

To accelerate electrons, a cyclotron is ineffective. The electron's mass is very small, which causes a sharp increase in its speed. Similar to how the electrons drift away from the oscillating electric field due to rapid relativistic variation in their mass.

Positive ions are accelerated by cyclotrons, which are machines. Velocity is a factor in cyclotron frequency. Since electrons have such a small mass, they cannot be accelerated by a cyclotron. Because of this, the electron will be thrown out of step with the oscillating field because the velocity will be increased to such a high degree.

Learn more about the cyclotron,

https://brainly.com/question/6775569

#SPJ4

The correct answer is covalent bonds tend to be less polar than ionic bonds.

How ionic bonds are different than the covalent bond?

When two atoms share a pair of electrons in a bond, covalent bonds are created.

An electron transfer from one atom to another occurs in ionic bonds. In contrast to conventional compounds, ionic compounds are held together by an ion pair's electrostatic contact.

The degree of bond polarity is determined by the differences in electronegativity between the atoms. Ionic bonds have atoms with significantly different electronegativities than covalent compounds do. Ionic bonds are hence far more polar than covalent ones.

To know more about ionic and covalent bond, check out https://brainly.com/question/14062466

#SPJ4

HPLC columns that use a liquid stationary phase, including such octadecyl (C18), covalently attached to a silica support material, and anything else that falls within that pH range must be operated within a

The human body makes numerous physiological adjustments to maintain homeostasis. One of them is preserving a proper acid-base balance. The pH of a healthy person's body ranges from 7.35 to 7.45, with an average of 7.40, when there are no pathological conditions present.

What is pH's complete form? "Potential of Hydrogen" is the full name of pH. pH is referred to as the nernst equation of the concentration of H+ ions. So, the definition of pH is "the strength of hydrogen" or "the power of hydrogen."

To know more about pH range visit:

https://brainly.com/question/15565260

#SPJ4

What is a gas?

Substances that exist in the gaseous phase are called gases. No specific volume may be assigned to gases. When placed in a container, they expand to fill the space. The shape of gases is not well-defined.

To learn more about gas from the given link.

https://brainly.com/question/25736513

#SPJ4

Loss of one or more electrons is referred to as oxidation. Reduction is the action of adding electrons to a molecule to enhance its energy.

Does oxidation add electrons or does it lose them?

Reduction is the process of gaining electrons, whereas oxidation is the process of losing electrons. Oxidizing agents are any substances that make other substances lose electrons (become oxidized). A reducing agent, on the other hand, is any molecule that causes another chemical to gain electrons.

What is the scientific name for oxidation?

Oxidation states change. When an oxidation occurs, the oxidation state increases or electrons are lost, but when a reduction occurs, electrons are added or the oxidation state decreases.

To know more about Oxidation visit:

https://brainly.com/question/9496279

#SPJ4

Answer:20Ca

Explanation:

20Ca because the lower number is the atomic number representing the number of protons and.

The molality of the solution, given that 110 g of sucrose is dissolved in 462 g of water is 0.70 M

First we shall determine the mole of the sucrose in the solution. This is illustrated below:

Mole = mass / molar mass

Mole of sucrose = 110 / 342

Mole of sucrose = 0.322 mole

Finally, we shall determine the molality of the solution. This is shown below:

Molality = mole / mass of water (in Kg)

Molality of solution = 0.322 / 0.462

Molality of solution = 0.70 M

Thus, the molality of the solution is 0.70 M

Learn more about molality:

https://brainly.com/question/26921570

#SPJ1

To find the molecular formula of a compound with a given empirical formula and molar mass, you can use the following steps:

Determine the molar mass of the empirical formula. The molar mass of a compound is the mass of one mole of the compound, and it is calculated by adding together the atomic weights of all the atoms in the compound. To determine the molar mass of the empirical formula C2OH4, you can add up the atomic weights of carbon (12.01 g/mol), hydrogen (1.01 g/mol), and oxygen (16.00 g/mol): 2 * 12.01 + 4 * 1.01 + 16.00 = 44.03 g/mol.

Divide the molar mass of the compound by the molar mass of the empirical formula. In this case, you can divide the molar mass of the compound (88 g/mol) by the molar mass of the empirical formula (44.03 g/mol): 88 / 44.03 = 1.999. This number is the multiple of the empirical formula that you need to multiply by to get the molecular formula.

Multiply the empirical formula by the multiple determined in step 2 to get the molecular formula. In this case, you can multiply the empirical formula C2OH4 by the multiple 1.999 to get the molecular formula C3.998OH7.996. However, since you cannot have fractional atoms, you need to round this formula to the nearest whole number. Rounding to the nearest whole number gives you C4OH8 as the molecular formula.

Therefore, the molecular formula of the compound with an empirical formula of C2OH4 and a molar mass of 88 g/mol is C4OH8.

It is important to note that the empirical formula only gives you the relative proportions of the atoms in a compound, not the actual number of atoms. The molecular formula, on the other hand, gives you the actual number of atoms of each element in the compound.

The molecular formula of the compound whose empirical formula is NO₂ is N₂O₄.

The relation between molecular formula and empirical formula is mentioned as follows:

molecular formula = empirical formula × n                        ......equation 1

where, n is number of building blocks needed to build the molecular formula.

Molar mass of NO₂ = Molar mass of molecular formula = 92 g/mol

Molar mass of one building block = the molar mass of the empirical formula = (1 × 14.0067 g/mol) + (2 × 15.9994 g/mol) = 46.0055 g/mol

Substitute value of  molar mass of molecular formula and  molar mass of the empirical formula in equation1,

92 = 46.0055 × n

n = 2

Using equation 1 , we get

Molecular Formula = NO₂ × 2

Molecular Formula = N₂O₄

The molecular formula is N₂O₄.

Learn more about empirical formula from the link given below.

https://brainly.com/question/13179835

#SPJ4

The amount of intermolecular forces, the structure of the material, and the temperature all affect how much vapour a pure chemical substance produces.

Intermolecular forces operate between molecules. Intermolecular forces are less powerful than intramolecular forces. Van der Waals forces, ion-dipole communication, dipole-dipole contact, and weaker intermolecular forces are a few examples of intermolecular forces.

Molecules interact with one another to form electrostatic forces, which are interactions of positive and negative charges. Similar to how molecules are kept together by covalent bonds, forces between molecules are made up of both attractive and repelling constituents.

To know more about intermolecular visit:

brainly.com/question/9007693

#SPJ4

The reagents that can be used to achieve of the following transformation is Na2Cr207, H2S04, H20 and PCC, CH2Cl2.

What is chemical reaction?

One or more chemicals, known as reactants, are changed into one or more new substances, known as products, during a chemical reaction. Chemical elements or chemical compounds constitute substances.

In the chemical reaction, 2 butanol is converted to 2 butanone by using oxidizing agent like PCC, ch2cl2 or other reagent is na2cr2o7, h2so4, h2o used this reagent where secondary alcohol is converted to ketone.

Therefore, the reagents that can be used to achieve of the following transformation is Na2Cr207, H2S04, H20 and PCC, CH2Cl2.

To learn more about chemical reaction from the given link.

https://brainly.com/question/11231920

#SPJ4

The accompanying 110 block connects individual copper wires using metal clips over plastic slots.

Copper is a common electrical conductor used in a wide variety of electrical wiring. Copper wire is used to create, transmit, and distribute electricity in electronic circuitry, telecommunications, and many other electrical equipment.

The copper produced through electrolysis is known as pure copper of electrolytic copper. The majority of copper cables are made with this highest quality of copper (greater than 99.95%). The conductivity is at its optimum when this purity is present, and even a small drop in purity can reduce it.

To know more about copper wires visit:

https://brainly.com/question/17965702

#SPJ4

Answer: Trigonal Pyramidal

Explanation: So, firstly we should eliminate the answers that don't work. It can't be linear since there are 4 atoms. We can assume that it can't be linear since those tend to be the geometry of compounds with few atoms.

So we are left with trigonal pyramidal, trigonal planar, and tetrahedral. To help us out, we should attempt to draw the MDG.

Firstly, we have to find the center atom. We must find the most electronegative atom, Hydrogen or Nitrogen. A simple way to find the most electronegative atom is to start at the bottom left of the Periodic Table and go diagonally to the top right. Therefore, Nitrogen would be the most electronegative. So we know that Nitrogen is the center atom.

Since Hydrogen only needs two atoms to have a full octet, they will only create a singular bond. Therefore we can determine that all the Hydrogens will pair with the Nitrogen. Looking at the numbers above the periodic table, the Hydrogens will contribute with one atom each. And the Nitrogen will contribute with 5 atoms. Therefore we have 8 atoms in total. So we can do the following diagram.

      H

       I

H -- N -- H

But the problem with this diagram is that there are 6 atoms used in total since the dashes do 2 atoms. The Nitrogen also does not have a full octet. Therefore we must put two atoms on the bottom of Nitrogen. This leads to the only possible answer, Trigonal Pyramidal.

The net ionic equation for the reaction that occurs when solutions of lead(II) nitrate[Pb(NO3)2 ] and potassium iodide(2KI) are combined is:

Pb²⁺(aq) + 2 I⁻(aq) ⇒ PbI₂(s)

The balanced Molecular equation for the reaction of lead nitrate [Pb(NO3)2 ]and Potassium iodide(2KI) is given as ;

Pb(NO3)2 (l) + 2KI (s) → PbI2 (s) + 2KNO3 (l).

Solutions of lead(II) nitrate and potassium iodide were combined and formed double displacement reaction. The complete ionic equation is:

Pb²⁺(aq) + 2 NO₃⁻(aq) + 2 K⁺(aq) + 2 I⁻(aq) ⇒ 2 K⁺(aq) + 2 NO₃⁻(aq) + PbI₂(s)

Removing Spectator ions, that appear both in the reactants and in the products. They do not participate in the reaction thats why they do not appear in the net ionic equation.So, The net ionic equation is:

Pb²⁺(aq) + 2 I⁻(aq) ⇒ PbI₂(s)

The net ionic equation for the reaction of lead(II) nitrate[Pb(NO3)2 ] and potassium iodide(2KI) solution is combined:

Pb²⁺(aq) + 2 I⁻(aq) ⇒ PbI₂(s)

To learn more about ionic Equation visit here : https://brainly.com/question/15466794?referrer=searchResults

#SPJ4