Answer:
Explanation:
The mass of the emitted particle is the smallest in beta decay.
Beta decay is the flow of electrons, alpha decay is the flow of helium nuclei
During alpha decay, the mass of the emitted particle is the smallest compared to other types of radioactive decay.
In alpha decay, an unstable atomic nucleus emits an alpha particle, which consists of two protons and two neutrons bound together, effectively forming a helium-4 nucleus. This means that the alpha particle has a mass of approximately 4 atomic mass units (AMU).
In contrast, beta decay involves the emission of beta particles, which can be either beta-minus particles (electrons) or beta-plus particles (positrons). These particles have much smaller masses compared to alpha particles. For example, a beta-minus particle (electron) has a mass of approximately 0.00055 AMU, and a beta-plus particle (positron) has the same mass but opposite charge.
Gamma decay, on the other hand, does not involve the emission of particles with mass but instead releases high-energy photons (gamma rays) to stabilize the nucleus.
Hence, the alpha particle emitted during alpha decay has the smallest mass among the particles emitted during radioactive decay processes.
During alpha decay, the mass of the emitted particle is the smallest compared to other types of radioactive decay.
To know more about alpha decay here
https://brainly.com/question/27870937
#SPJ4
A 24-v battery is powering a light bulb with a resistance of 2. 5 ohms. What is the current flowing through the bulb?.
The current passing through the bulb having a voltage of 24 V is 9.6 Amperes
The potential difference of the bulb = 24 V
The resistance of the bulb = 2.5 ohms
The current flowing through the bulb can be found using ohm's law i.e.
I = V / R
where I is the current flowing through the bulb
V is the potential difference in the bulb
R is the resistance in the bulb
Let us substitute the known values in the above equation, we get
I = 24 / 2.5
= 9.6 A
Therefore, the current flowing through the bulb is 9.6 A
Learn more about the ohms law in
https://brainly.com/question/1247379
#SPJ4
why does a solid break at one location vs another
Answer:
can you provide a paper so I can see exactly what u have to do so I can help because I think I know the aswer
as they reach an intersection, you realize you are in the straight lane and you intended to make a left turn. what should you do
You should turn left and must yield to oncoming vehicles going straight.
Left turns must give way to oncoming traffic. A four-way stop allows the first driver to reach the intersection ahead of the other drivers after coming to a complete stop. Drivers entering the driveway from a driveway alley or curb must yield to vehicles already on the main road.
Gradually decelerate while looking in the rearview mirror. Transfer to the left lane. Watch out for oncoming vehicles and pedestrians. A green light means GO but you must let any remaining vehicles bicycles, or pedestrians at the intersection pass before you can proceed. You can turn left only if there is enough room for oncoming traffic bicyclists or pedestrians to turn before it becomes dangerous.
Learn more about An intersection here:-https://brainly.com/question/28432272
#SPJ4
An antelope is being chased across the savannah by a hungry lion. The lion runs at a constant speed. How might the antelope use its velocity to escape the lion? choose the three statements that apply.
The antelope can flee from the lion if it can run in the same direction while speeding up, if it can run in that same direction while speeding up, or if it can do both.These first three claims are accurate in all three cases.
How do prey and predator interact?There is a prey-predator connection in every ecosystem.Only if the prey possesses additional traits, such as the capacity to mimic the poisonous species that the predator despises, the speed to run, the capacity to hide from the predator, etc., can it escape the predator.The lion's preferred prey is the antelope.So the antelope can easily flee from the lion if it speeds up its pace.It can readily hide in another location and flee the lion if it runs at the same speed but changes directions.The victim makes an effort to defend itself against the predator in this way.As a result, the first three methods—A, B, and C—can all be employed to avoid the lion (predator).To learn more about antelope refer
https://brainly.com/question/16374264
#SPJ4
calculate the self-inductance (in mh) of a 49.0 cm long, 10.0 cm diameter solenoid having 1000 loops.
The self inductance in the solenoid is
Self inductance in the solenoidWe have,
Length of solenoid = 49.0 cm = 0.49 m ⇒ l
Diameter of the solenoid = 10.0 cm ⇒ d
Radius = 5 cm = 0.05 m ⇒ r
Number of loops in the solenoid is 1000 ⇒ N
µ₀ = 4π × 10⁻⁷ H/m.
So, the self inductance in the solenoid is:
L = {μ₀ (N)² (A)}/l
= {(4π × 10⁻⁷) (1000)² (0.05)²}/0.55
= 0.00570 H = 5.70 mH
Learn more about solenoid here: https://brainly.com/question/15612168#SPJ4
How do you identify conjunctive adverbs in a sentence?.
Subjunctive adverbs can be followed by a semicolon or period usually followed by a comma.
Adverb Conjunctions also called conjunctive adverbs to join two complete thoughts together like conjunctions. Use the second sentence to modify the first sentence like an adverb. Subjunctive adverbs can be followed by a semicolon or period, usually followed by a comma.
Conjunctive adverbs are a special type of adverb used to connect independent clauses together. While most adverbs are used to modify verbs adjectives or other adverbs subjunctive adverbs are used as conjunctions to connect one sentence to another. Indicates a connection between two separate statements within a sentence. Organize your ideas into two or more sentences. Show the relationships between ideas in stand-alone sentences.
Learn more about Conjunctive adverbs here:-https://brainly.com/question/14407099
#SPJ4
what is the size and position of an image formed by a plane mirror? question 20 options: same size, closer to the mirror same size, same distance away from the mirror enlarged, closer to the mirror reduced, farther from the mirror
Same size image is formed by a plane mirror, and same distance away from the mirror is formed by a plane mirror.
How an image is formed by a plane mirror.?To see an example of how a mirror can reflect an image, simply visit the nearby restroom. The images of a plane mirror are identical to the object in terms of size, location, and orientation (they are "upright").
Take note of how the observer perceives the reflected rays as coming from the mirror's reflection. These rays actually originate from the reflection locations on the mirror. Because the image behind the mirror cannot be projected onto a screen and instead only appears to come from a single location behind the mirror, it is known as a virtual image.
To know more about plane mirror, visit:
https://brainly.com/question/13101215
#SPJ4
H2 + O = H2O which are the reactants and which are the products?
please answer
The reactants are shown on the left and the products are shown on the right. For example: hydrogen and oxygen can react to form water as shown in the equation below. 2H2 + 02 → 2H2O (You can disregard the numbers in the equations during this activity.)
Explanation:
hydrogen+oxygen= water
a spherical, convex mirror has a radius of curvature of 0.123 m. what is the focal length of the mirror? (in m; answer sign and magnitude)?
To find the spherical convex mirror radius, learn the focal length and magnitude.
What is focal length?
The focal length of a thin lens in air is measured from the lens's center to its primary foci, also known as focal points. The focal length of a converging lens, such as a convex lens, is positive and determines how far a collimated light beam must travel to focus on a single point.
What is magnitude?
Magnitude typically refers to size or distance. By comparing the size and motion speed of the object, we can relate magnitude to movement. The object's or quantity's size determines its magnitude.
R=0.123m
Focal length E= R/2
E= - 0.0615m.
Therefore, the focal length is 0.0615m.
Learn more about focal length from the given link.
https://brainly.com/question/28039799
#SPJ4
what would the roche limit be for an earth-orbiting body with the same density as earth? (the earth's density is 5.5 g/cm3. give your answer in terms of rearth.)
Buying or selling the Earth will go against the rights of the inhabitants of the world (humans and other living beings).
What is the Roche limit of Earth?
Solar influence
Far from the Roche limit, the mass is practically spherical. Closer to the Roche limit, the body is deformed by tidal forces. Within the Roche limit, the mass's own gravity can no longer withstand the tidal forces, and the body disintegrates.If Earth had two moons, it would be catastrophic. An extra moon would lead to larger tides and wipe out major cities like New York and Singapore. The extra pull of the moons would also slow down the Earth's rotation, causing the day to get longer.The Moon will swing ever closer to Earth until it reaches a point 11,470 miles (18,470 kilometers) above our planet, a point termed the Roche limit. "Reaching the Roche limit means that the gravity holding it [the Moon] together is weaker than the tidal forces acting to pull it apart," Wilson said.The Roche limit for the Moon orbiting the Earth is 2.86 times radius of EarthThe nearest distance between the planet and its satellite at where the planets gravitational pull does not torn apart the planets satellite is known as Roche limit.The relation to determine Roche limit is:
[tex]Roche Limit=(2.423) (Rp3) {{\sqrt[3]{\frac{D_{P} }{D_{m} } } } }[/tex]
Here is radius of planet and are density of planet and moon respectively.
According to the problem,
Density of Earth, = 5.5 g/cm³
Density of Moon, = 3.34 g/cm³
Consider be the radius of the Earth.
Substitute the suitable values in the equation (1).
To learn more about earth-orbiting refer to:
https://brainly.com/question/15127663
#SPJ4
_____ is a branch of science that involves the study of the physical world; _____ is the language of physics.
7) A net force of 6. 6 N acts on 9. 0 kg hamster. If this
object accelerates from rest to 3. 0 m/s west
>a) How far did the hamster travel?
The distance of the object is 12.27m
We are given that,
The net force = F = 6.6N
The mass = m = 9.0kg
The velocity of the object = v = 3.0m/s
Therefore , the hamster is travelled distance ,that can be calculated by Newton's second law of motion,
F = ma
F = (mv²)/r
r = (mv²)/F
Putting the above values in the given equation,
r = (9.0kg)(3.0m/s)²/6.6N
r = 12.27m
Therefore, the hamster travelled 12.27m.
To know more about distance
https://brainly.com/question/4918603
#SPJ4
two parallel wires are separated by 6.00 cm, each carrying 3.00 a of current in the same direction. (a) what is the magnitude of the force per unit length between the wires? (b) is the force attractive or repulsive?
The magnitude of the force per unit length between the wires is 3 x 10⁻⁵ N/m and attractive forces will be in output.
Given-
Two parallel wires, each carrying 3A of current in the same direction, are spaced apart by 6cm.
Theory-
When electric charges are in relative motion with one another and have an effect on magnetized materials, a magnetic field, also known as a pseudo-vector field, is created. We can define the magnetic field as the region where magnetic force is present and is present around a magnet. Electric charges and magnetic dipoles are moved by a magnetic force created by a magnetic field, a type of field that travels through space.Two wires carrying various currents in the same direction are provided to us. Here, we can assume that a wire is maintained in the magnetic field of another wire, causing the generation of magnetic force that the wire experiences.Mathematics-
[tex]F=\alpha Ii/2\pi d\\\\\alpha =4\pi *10^{-7}\\I=i=3A\\d=6cm=0.06m\\\\\\Substituting\\\\F=3 *10^{-5} N/m[/tex]Since the currents flowing in both the wires is same so the force induced will have negative field. Negative field refers to attractive force.To know further about attractive forces -
https://brainly.com/question/2396709
#SPJ4
If a wave has a wavelength of 50 m and is traveling through water that is 30 m deep, what kind of wave is this?.
If a wave has a wavelength of 50 m and is traveling through water that is 30 m deep then this kind of wave is called deep water wave.
How is it a deep water wave?By definition, deep-sea waves are waves that occur at depths greater than half the wave's wavelength.In this case the wave wavelength is 50 m and the water depth is 30 m.Half the wave wavelength is 25 m.And this waves become deep sea waves or water waves.What is a deep water wave?Deep-sea waves occur when the depth is more than half the wavelength. Mathematically, deep-sea waves are defined as waves originating in the deep ocean that are greater than twice the wavelength of the wave. For example, if a particular wave has a wavelength of 10 meters, it is considered a deep-sea wave if the depth of the ocean where it originates is greater than 5 meters.Can learn more about deep water waves from https://brainly.com/question/23269505
#SPJ4
In the reaction shown, iron reacts with water to form iron oxide (Fe3O4) and hydrogen gas (H₂).
3Fe + 4H₂0
Fe3O4 + 4H₂
Which of these BEST describes the iron (Fe) reactant?
A. molecule
B. ion
C. compound
D. Element
Cold water does not react with iron. Iron, however, interacts with steam to create iron and hydrogen oxide. Fe3O4 + 4H2 = 3Fe(s) + 4H2O. Iron (II, III) oxide, also known as ferric oxide (Fe3O4), is a combination of Fe O and Fe2O3.
What happens when water and iron are combined?Ferric oxide (Fe2O3) and hydrogen gas are produced when ferrous oxide (Fe O) and water (H2O) combine (H2). This reaction yields a black solid called Fe3O4, which is frequently used as an antirust pigment. Understanding the chemical equation for this reaction is required to determine whether a specific mixture will produce Fe3O4: 2Fe3+(aq)+3H2 = 2Fe(s)+3H2(g) (g). According to this equation, two moles of iron metal will interact with to create two moles of ferric ion and three moles of hydrogen gas, it takes three moles of hydrogen gas. All of the iron will be transformed to Fe3+ ions and no Fe3O4 will occur if the combination only contains one mole of each component.
To know more about Rusting , visit-https://brainly.com/question/13026484
#SPJ13
A runner exerting a running force of 325 n to the right is met with an air resistance force of 45 n to the left. What is the net force of the runner?(1 point).
The correct answer of net force of the runner is 280 N.
What is resultant force?
A resultant force is the single force and corresponding torque that are produced when adding vectors to a system of forces and torques acting on a rigid body.
Therefore given,
Runner force = F1 = 325 N
Resistance force in opposite direction of runner = F2 = 45 N
Resultant Force, F(Net) = 325 – 45 = 280 N
The net force of the runner would be 280 N
To learn more about resultant force from the given link
https://brainly.com/question/25239010
#SPJ4
Early skeptics of the idea of a rotating earth said that the fast spin of earth would throw people at the equator into space. The radius of earth is about 6400 km. Show why this objection is wrong by determining the following information.
The radius of earth is about 6400 km.
The new inflationary model was good attempt to explain why the universe is expanding. This could explain why there is so much of matter.
Invariant conditions coexist in inertial frames. These are the frames that obeys newton's law of motion. The Lorentz and gauche configurations co-ordinate out the space and time as minoskwi space with the fourth co-ordinate with position time pair. Earth is flat oval shaped with bulged towards equator and flat at poles.
Since the equatorial plane has greater side compared to polar plane and gravity has less impact on equator due to this factor.
Mathematical Reasoning-
[tex]equator > polar\\\\ge < gp[/tex]
[tex]F=G\frac{Mm}{R^2}[/tex]
[tex]F=mg[/tex]
[tex]g=\frac{GM}{R^2}[/tex]
g ∝ R⁻²
To know more about inertial frames -
https://brainly.com/question/15868300
#SPJ4
A 1. 2-m3 rigid tank contains nitrogen gas at 200 kpa and 350 k. Heat is transferred to the nitrogen in the tank and the pressure of nitrogen rises to 900 kpa. Determine the work done during this process.
Using the concepts of work, we got that 0 joule is the amount of the work done during the process in which 1.2-m3 rigid tank contains nitrogen gas at 200 kpa and 350 k and heat is transferred to the nitrogen in the tank and the pressure of nitrogen rises to 900 kpa.
We are given some values of the rigid tank which are
Volume of the tank (V) = 1.2 m³
Initial pressure of the nitrogen (P₁) = 200 kPa
Initial temperature of the nitrogen (T₁) = 350 K
Final pressure of the nitrogen (P₂) = 900 kPa
The volume of nitrogen gas is same as volume of tank. Now, as the tank is rigid so, the volume of nitrogen gas remains the same.
We know that,
Work done on a gas is given as: PΔV
Where, ΔV is the change in volume.
But, the volume here is constant. So, ΔV = 0.
Therefore, work done=P×0=0Joules.
Hence, if 1. 2-m3 rigid tank contains nitrogen gas at 200 kpa and 350 k and Heat is transferred to the nitrogen in the tank and the pressure of nitrogen rises to 900 kpa, then the work done during this process is 0 joules.
To know more about work, visit here:
https://brainly.com/question/18094932
#SPJ4
What is the moment of inertia of a 1. 5-kg-rod that rotates about its center? the length of the rod is 1. 8 m.
Using the concepts of Moment of inertia, we got that 2.43kgm² is the moment of inertia of a 1. 5-kg-rod that rotates about its center if the length of the rod is 1. 8 m.
We know very well that moment of inertia of rod is different at different point.
Moment of inertia of rod about the center is given by (1/2)ML²,where moment of inertia of rod at the ends is given by (1/3)ML².
Now, we have mass of rod which is given by 1.5 kg, and length of rod is 1.8m
Therefore, moment of inertia of a rod about its center=(1/2)ML².
On putting the values,(M.O.I)=(1/2)×1.5×(1.8)×(1.8)
=>(M.O.I)=(0.5)×1.5×1.8×1.8
=>(M.O.I)=2.43Kgm²
Hence, the moment of inertia of a 1. 5-kg-rod that rotates about its center, if the length of the rod is 1. 8 m. is 2.43kgm².
To know more about moment of inertia, visit here:
https://brainly.com/question/15246709
#SPJ4
two wires have the same diameter and same resistance. if one is made of copper, and the other is of silver, which wire is longer?
The silver wire will be longer than the copper wire as the silver has the high expandability than the copper and not just that the silver is very good conductor for electricity but we use copper for wires cause of there cheap availability.
what is resistance?
The amount that an object impedes or resists in an electric current is referred to as resistance. Electric current is the flow of electrons. Consider an example of a person attempting to move from one shop to another in a busy market. This condition is eerily similar to an electron attempting to pass through a wire.
Resistance is the property of materials that allows electric current to flow. Resistance unquestionably resists the passage of current. Furthermore, the unit of resistance is ohms, which is symbolised by the Greek capital letter omega. Furthermore, resistance is affected by the voltage across a resistor as well as the current running through it. Resistance is a measure of the resistance to current flow in an electrical circuit.
To learn more about resistance follow the given link: https://brainly.com/question/16014555
#SPJ4
Connor is driving to a concert and needs to pay for parking. There is an automatic fee of $8 just to enter the parking lot, and when he leaves the lot, he will have to pay an additional $2 for every hour he had his car in the lot. How much total money would connor have to pay for parking if he left his car in the lot for 3 hours? how much would connor have to pay if he left his car in the lot for tt hours?.
Connor has to pay for parking if he left his car in the lot for 3 hours will be $10. The expression will be C = 13 -t for t hours.
Solution:
The expression for t hours will be:-
Gas left after t hours: 13−1t
Cost of gas left after 3 hours: 13−1(3)= $10
Therefore, Connor has to pay for parking if he left his car in the lot for 3 hours will be $10. The expression will be C = 13 -t for t hours.
It's okay to hold hands. In small towns putting your arm around your partner can cause glare. Avoid cuddling on public benches queues and restaurants. Also, don't look into each other's eyes affectionately when there are other people around. It's best not to kiss or hug Japanese people to greet them. While Westerners often kiss on the cheek as a greeting, Japanese prefer bowing and shaking hands. In addition, public declarations of love are not considered good manners.
Learn more about An automatic fee here:-https://brainly.com/question/24039502
#SPJ4
what is the direction of the centripetal acceleration of the gum, as the fan is turning at top speed?
Radially inward is the direction of the gum when the fan reaches its top speed.
Centripetal acceleration is the type of acceleration that acts on the object with its direction towards the midpoint of the circular motion that the object is revolving in like in the case of the fan with the gum.
It should be kept in mind that centripetal acceleration acts on the body when it is in a constant circular motion albeit the direction changes periodically with the object always acting radially inward.
The centripetal acceleration is given by the formula
= v² / r
Here v = velocity of moving object
r = distance from midpoint/centre of the circular path
To learn more about Centripetal acceleration visit
https://brainly.com/question/14465119
#SPJ4
an 8.00 kg block of wood sits at the edge of a frictionless table, 2.20 m above the floor. a 0.500 kg blob of clay slides along the length of the table with a speed of 24.0 m>s, strikes the block of wood, and sticks to it. the combined object leaves the edge of the table and travels to the floor. what horizontal distance has the combined object traveled when it reaches the floor?
The object has to travel a horizontal distance of 0.943 m when it reaches a floor.
Here, it has been mentioned that the mass of the wood is = 8.00 kg
The mass of the clay blob is = 0.500 kg
The speed of the clay blob is = 24 m/s
The speed of the wood is = 0 m/s
We already know that the formula for the final velocity after the collision is
= [tex]m_{1}[/tex][tex]v_{1}[/tex]/[tex]m_{1}[/tex]+[tex]m_{2}[/tex]
Using this formula and the given conditions, we get-
= 1.41 m/s (i)
We know the formula = S = ut+1/2g*t^2
Using this formula and the values given, we get the time traveled to go down = 2.20= 0+1/2(9.8)*t^2
= t = 0.669 seconds (ii)
Using the values of (i) and (ii), we get-
Distance travelled horizontally = x = 1.41 * 0.669
= 0.943 meters
Therefore, we know that the object travels 0.943 meters horizontally,
Learn to know more about the collision on
https://brainly.com/question/13138178?referrer=searchResults
#SPJ4
A baseball rolls off a 0. 70 m high desk and strikes the floor 0. 25 m away from the base of the desk. How fast was the ball rolling?.
The ball was rolling at a speed of 0.66 m/s when it was rolling on the desk.
The speed of the ball as it fallsDetermine the time it takes the ball to fall to the floor.
We have,
y = 0.70 m
g = 9.8 m/s²
s = 0.25 m
So,
y = ½ (a) (t)²
t = √(2y/g)
= √(2) (0.70 m) / (9.8 m/s²)
= 0.378 s
Determine the speed at which the ball rolls across the table.
v = s/t
= 0.25/0.378
= 0.66 m/s
Thus, the ball rolls off the table at a speed of 0.66 m/s
Learn more about speed here: https://brainly.com/question/26399085#SPJ4
A 0.045 kg bullet moving at 478 m/s strikes a stationary 5.2 kg wooden block. The bullet passes through the block and leaves with a velocity of 304 m/s. If the block was originally at rest, how fast does it move after being hit by the bullet?
Work out and use units
The speed of the block ofter being hit by the bullet of mass 0.045 kg is 6.77 m/s.
What is speed?Speed can be defined as the ratio of distance to time.
To calculate how fast the block move after being hit by the bullet, we use the formula below.
Formula:
U = (mv-mV)/M......... Equation 1Where:
U = Speed of the block after being hit by the bulletM = Mass of the blockm = Mass of the bulletv = Initial speed of the bulletV = Final speed of the bulletFrom the question,
Given:
m = 0.045 kgM = 5.2 kgv = 478 m/sV = 304 m/sSubstitute these values into equation 1
U = [(0.045×478)+)-(0.045×304)]/5.2U = (21.51+13.68)/5.2U = 35.19/5.2U = 6.77 m/sHence, the speed of the block ofter being hit by the bullet is 6.77 m/s.
Learn more about speed here: https://brainly.com/question/4931057
#SPJ1
an ice dancer with her arms stretched out starts into a spin with an angular velocity of 1.00 rad/s. her moment of inertia with her arms stretched out is 2.48 kg m2. what is the increase in her rotational kinetic energy when she pulls in her arms to make her moment of inertia 1.40 kg m2?
The rotational kinetic energy when she pulls in her arms is 0.7 joule.
We need to know about kinetic energy to solve this problem. Kinetic energy is the energy from a moving object. It can be determined as
KE = 1/2 . I . ώ²
where KE is kinetic energy, I is the moment of inertia and ώ is the angular speed.
From the question above, we know that
ώ = 1 rad/s
I = 1.4 kgm²
Let's assume that the angular velocity does not change. The kinetic energy should be
KE = 1/2 . I . ώ²
KE = 1/2 . 1.4 . 1²
KE = 0.7 joule
Find more on kinetic energy at: https://brainly.com/question/25959744
#SPJ4
Jack is trying out a new skateboard that he got for his birthday. He puts one foot on the skateboard and the other foot on the ramp. He notices that when he pushes off of the ramp with his foot, his body and the skateboard move forward up the ramp. He wants to investigate this phenomenon to answer the question: What causes this motion? He determines that he needs to figure out which force pair is involved with the motion he experiences.
How high up is a 5 kg object that has 400 joules
of Energy?
(Round to two decimal places)
Answer:
8.15 m
Explanation:
Potential Energy = m g h
400 = 5 * 9.81 * h
h = 8.15 m
what property or properties of light determine whether it is blue or red or ultraviolet or any other type of light in the electromagnetic spectrum?
Wavelength is the property of light determine whether it is blue or red or ultraviolet or any other type of light in the electromagnetic spectrum
Wavelength is that property of light which determine the color and type of light .
In visible region , every colors of light have its associated wavelength .
The distance between consecutive crests of a wave, particularly the points of an electromagnetic wave is known as its wavelength.
To learn more about Wavelength here :
https://brainly.com/question/12924624
#SPJ4
a mass oscillates on a spring on a frictionless, horizontal surface. at the time indicated by the arrow, what is the phase of the oscillation?
If a mass oscillates on a spring on a horizontal, non-stick surface, vx is equal to zero and Fx is the phase of the oscillation. During the Arrow's Predicted Time,
What does the term oscillation mean?Oscillation is the process of any quantity or measure repeatedly varying about its equilibrium value throughout time. Another definition of oscillation is the repeated variation of a substance between two values or around its core value.
Are periodic motion and oscillation the same thing?When an object goes back and forth frequently, it is said to be oscillating. In contrast, periodic motion is the movement of an item that repeats a course after a regular time period. Every oscillatory motion is periodic, but not every periodic motion is an oscillatory motion.
To know more about oscillation visit:
https://brainly.com/question/29273618
#SPJ4
