e) suppose you choose the initial masses so that both reactions produce pcl 3. explain how both of these chemical reactions obey the law of definite proportions, even though they produce different numbers of moles of the product. justify your answer with calculations.

Answers

Answer 1

The law of definite proportions states that regardless of the amount of reactants used, a chemical reaction will always produce the same proportion of products. In this case, both reactions will produce the same mole ratio of PCL3 (1:1) even though they produce different numbers of moles of the product. To demonstrate this, let's take a look at the first reaction:

Reaction 1:

2HCl + Ca3(PO4)2 → 2CaCl2 + PCl3

2 moles of HCl + 1 mole of Ca3(PO4)2 → 2 moles of CaCl2 + 1 mole of PCl3

Therefore, the mole ratio of PCL3 is 1:1.

Now let's look at the second reaction:

Reaction 2:

HCl + P4O10 → PCl3 + H3PO4

1 mole of HCl + 2 moles of P4O10 → 1 mole of PCl3 + 2 moles of H3PO4

Once again, the mole ratio of PCL3 is still 1:1. Therefore, both of these chemical reactions obey the law of definite proportions.

What is definite proportions?

Definite proportions law states that a given compound always contains the same elements in the same proportions by mass. This law, also known as the law of constant composition.

To learn more about definite proportions

Here: https://brainly.com/question/1496091

#SPJ4


Related Questions

metals are excellent conductors of electricity. nonmetals are poor conductors of electricity and are called insulators. some elements have the ability to conduct electricity roughly between that of metals and nonmetals. give some examples of these elements, and name the class they belong to

Answers

Examples of elements that conduct electricity between that of metals and nonmetals are carbon, silicon, and germanium.

What is electricity?

Electricity is a form of energy that is created when electrons move from one atom to another. It is a form of energy that can be used to power a variety of appliances, from lights to computers to refrigerators. Electricity is created when electrical charges move through a conductor, such as a wire. It can also be stored in batteries for later use. Electricity can be very dangerous and should always be handled with care.

These elements belong to a class called semi-conductors. Semi-conductors are materials that can be manipulated to allow them to either conduct or insulate electricity depending on their application. They are an integral part of many electronic circuits, whether it be for computers, phones, or other electronic devices. Semi-conductors are also used in photovoltaic cells, which are used to convert solar energy into electricity.

To know more about electricity click-
https://brainly.com/question/24154868
#SPJ4

Calculate how many grams of Aluminum are needed to produce 21.6 grams of Aluminum oxide (Al2O3).

4Al + 3O2 → 2Al2O3

a
5.71 g Al
b
132 g Al
c
11.43 g Al
d
26.982 g Al

Answers

11.4g of Al are needed to produce 21.6g of Al2O3.

The gas chromatograph, in combination with the _________________, can separate the components of a drug mixture and then unequivocally identify each substance present in the mixture.
- Mass Spectrometer

Answers

The gas chromatograph, in combination with the mass Spectrometer, can separate the components of a drug mixture and then unequivocally identify each substance present in the mixture.

A mass spectrometer can only determine a molecule's mass after it has changed into a gas-phase ion. To do this, it charges molecules electrically and converts the resulting flow of electrically charged ions into a proportionate electrical current that a data device can then read. The components of a drug mixture are separated by the gas chromatograph and mass spectrometer, which then positively identify each component. By electrically charging molecules, which results in a flow of electrically charged ions, it does this.

learn more about chromatograph  here:

brainly.com/question/29442779

#SPJ4

Why is the CH3OH polar and not non polar? Also why is the structure tetrahedral and not octahedral? It has 6 sides.
I am so confused

Answers

Do you mean CH3COOH

Write a balanced chemical equation describing the dissolution (dissolving) of strontium fluoride. Determine the molar solubility of SrF2 in a 0.5 mol/L solution of Sr(NO3)2. (Strontium nitrate is a highly soluble salt)

Answers

The balanced chemical equation for the dissolution of strontium fluoride in water is: SrF2 (s) + H2O (l) --> Sr(NO3)2 (aq) + 2F- (aq) and The molar solubility of SrF2 in a 0.5 mol/L solution of Sr(NO3)2 is approximately 3.8 x 10^-7 mol/L.

How to calculate molar solubility of SrF2?

The molar solubility of SrF2 in a 0.5 mol/L solution of Sr(NO3)2 can be determined using the solubility product constant (Ksp) of SrF2. The Ksp of SrF2 is 2.9 x 10^-11.

The solubility of SrF2 in a 0.5 mol/L solution of Sr(NO3)2 can be calculated by using the expression:

Ksp = [Sr2+] [F-]^2

where [Sr2+] is the molarity of the Sr2+ ions and [F-] is the molarity of the F- ions.

The solubility of SrF2 in a 0.5 mol/L solution of Sr(NO3)2 can be calculated by using the expression:

[Sr2+] = Ksp / [F-]^2

The molar solubility of SrF2 in a 0.5 mol/L solution of Sr(NO3)2 is approximately 3.8 x 10^-7 mol/L

To learn more about molar solubility, visit: https://brainly.com/question/30265969

#SPJ1

A certain substance has a fixed composition of S and Cl atoms regardless of its source. Which of the following statements about the substance is true?A.) The substance is a homogenous mixtureB.) The substance contains atoms of silicon and chlorineC.) The substance is a heterogenous mixtureD.) The substance is a compound that contains two elementsE.) The substance must contain equal numbers of S and Cl atoms

Answers

The answer was the substance is a compound that contains two elements.

What is meant by elements ?

A fundamental object that is difficult to divide into smaller bits is known as an element.An element is a substance that cannot be broken down by non-nuclear reactions in chemistry and physics.A discrete component of a larger system or collection is referred to as an element in computers and mathematics.The names nihonium, moscovium, tennessine, and oganesson are the official names for elements 113, 115, 117, and 118, respectively.A pure element is one that is made up of atoms of the same kind. Since sodium exclusively contains sodium atoms, it is a pure element. While various atom types make up cement and glass, respectively.

To learn more about elements refer to

https://brainly.com/question/20096027

#SPJ4

The mass of a mole of carbon atoms is 12.011 grams. What is the mass of a single atom of carbon? 1.9 x 10-23 g atom 1.995 x 10-23 2 x (6.022 x 10²3) 2.0 x 10²3 atom atomn​

Answers

The mass of a single atom of carbon is 1.9 x 10-²³ g/atom (option A).

How to calculate mass of single atom?

An atom is the smallest possible amount of matter which still retains its identity as a chemical element, now known to consist of a nucleus surrounded by electrons.

According to this question, the mass of a mole of carbon atoms is 12.011 grams.

1 mole of carbon atom = 12g

1 mole of a carbon atoms = 6.022 × 10²³ atoms

Hence, mass of 6.022 × 10²³ atoms of carbon = 12g

Mass of 1 atom of carbon = 12 ÷ 6.022 ×10²³ = 1.9 × 10-²³ g/atom.

Therefore, 1.9 × 10-²³ g/atom is the mass of a single atom of carbon.

Learn more about atom at: https://brainly.com/question/29695801

#SPJ1

Given the reactions: Mg(s) + 2H2O(l) → Mg(OH)2(s) + H2(g) For the reaction to occur at the greatest rate, 1 gram of Mg(s) should be added in the forms of
a. large chunks
c.small chunks
b. a ribbon (a thin, long piece)
d. a powder

Answers

Answer: D
Powders have the greatest surface area and the greater the surface area the greater the reaction rate

Select the type of chemical bond that most commonly forms between each combination of elements as indicated.
Metallic bond → _____
Covalent bond → _____
Ionic bond → _____
Two or more metal atoms
Metal to nonmetal
Nonmetal to nonmetal

Answers

The type of chemical bond that most commonly forms between each combination of elements is Metallic bond → metallic, Covalent bond → covalent, Ionic bond → ionic.

A metallic bond is a type of chemical bond that forms between two or more metal atoms. The metallic bond is characterized by the sharing of electrons between the atoms, creating a metallic lattice structure. This type of bonding results in a strong bond that gives metals their characteristic properties such as high melting points, ductility, and conductivity.

A covalent bond is a chemical bond in which atoms share electrons. Covalent bonds typically form between nonmetal atoms and are characterized by the sharing of electrons between atoms. Covalent bonds are typically strong and result in stable compounds. They are commonly found in compounds such as water, methane and carbon dioxide.

An ionic bond is a chemical bond in which one atom loses an electron to another atom. Ionic bonds typically form between metal atoms and nonmetal atoms. Ionic bonds are characterized by the transfer of electrons, resulting in the formation of ions. Ionic bonds are typically strong and result in stable compounds, They are commonly found in compounds such as sodium chloride (NaCl) and calcium chloride (CaCl2).

To know more about covalent bond

https://brainly.com/question/10777799

#SPJ4

The salt NaHSO3 (Ka1(H2SO3) = 1.4×10-2; Ka2(HSO3-) = 6.5×10-8) undergoes hydrolysis upon dissolution in water. The complete (i.e. without any approximation made) proton balance for the system is:

Answers

This equation implies that there are two protons on the left side and two protons on the right side.

The proton balance for the system

NaHSO3 + H2O → Na+ + HSO3- + OH-

H2SO3 + 2 H2O → H3O+ + HSO3- + OH-

1.4 x 10-2 H3O+ + 6.5 x 10-8 HSO3- → 1.4 x 10-2 OH- + 6.5 x 10-8 H3O+

NaHSO3  ->  Na+ + HSO3- (Ka1 = 1.4 x 10-2)

HSO3-  ->  H+ + SO32- (Ka2 = 6.5 x 10-8)

The complete proton balance for the system is:

NaHSO3 + H2O <=> Na+ + H3O+ + HSO3-

HSO3- + H2O <=> H+ + SO32- + H2O

NaHSO3 + H2O <=> Na+ + H3O+ + H+ + SO32-

So the proton balance is:

NaHSO3 + H2O <=> Na+ + 2 H3O+ + SO32-

The two acid dissociation constants (Ka1 and Ka2) determine the relative concentrations of the three species.At equilibrium, the concentrations of Na+, HSO3-, and SO32- will be determined by the equilibrium constants Ka1 and Ka2. The overall reaction equation for the hydrolysis of NaHSO3 can be written as:

NaHSO3 + H2O <=> Na+ + 2 H3O+ + SO32-

This equation implies that the hydrolysis of NaHSO3 is a neutralization reaction, where the hydrogen ions from the acid (NaHSO3) are neutralized by the hydroxide ions in water.The two acid dissociation constants (Ka1 and Ka2) determine the relative concentrations of the three species and the pH of the solution.

To learn more about The proton balance for the system refer to:

https://brainly.com/question/12449324

#SPJ1

which of the following correctly represents an oxidation or reduction reaction? choose all that are correctly matched? A.oxidation of pyruvate to CO 2​B.oxidation of NAD +to NADH C.reduction of pyruvate to CO 2​D. reduction of NAD + to NADH

Answers

Oxidation of pyruvate to CO2, oxidation of NAD+ to NADH,  reduction of NAD+ to NADH correctly represents an oxidation or reduction reaction. Thus, option A, B, D is the answer.

An oxidation reaction is a chemical reaction in which a molecule loses one or more electrons. A reduction reaction is a chemical reaction in which a molecule gains one or more electrons.

Oxidation of pyruvate to CO2 represents an oxidation reaction because pyruvate loses electrons and becomes CO2 in this reaction.

Oxidation of NAD+ to NADH represents an oxidation reaction because NAD+ loses electrons and becomes NADH in this reaction.

Reduction of pyruvate to CO2 is not a correct statement because pyruvate is a molecule that loses electrons in the process of oxidation, not reduction.

Reduction of NAD+ to NADH represents a reduction reaction because NAD+ gains electrons and becomes NADH in this reaction.

Learn more about oxidation:

https://brainly.com/question/25798412

#SPJ4

What is the mass, in grams, of 9.56 x 10 molecules of methanol (CH, OH) ?

Answers

The mass of given no. of molecules of methanol will be 508 grams.

First , we have to calculate the no. of moles. So, No of moles = No. of molecules / avagadros no. Therefore :

⇒9.56 x [tex]10^{23}[/tex]  / 6.02 x [tex]10^{23}[/tex]

⇒15.875 moles

Now, We know that the molecular mass of methanol is 32 grams. So, we can calculate the mass by simply multiplying the molecular mass with moles.

Therefore,

⇒15.875 x 32

508.00 grams

Learn more about mole concept here,

https://brainly.com/question/22540912

The complete question should be ,

What is the mass, in grams, of 9.56 x [tex]10^{23}[/tex]  molecules of methanol (CH, OH) ?

If light travels exactly 1 meter in 1/299,772,458 of a second, how many kilometers does it travel in 4.00 years? for this question, 1 year = 365.25 days.

Answers

To solve this problem, we need to convert the time in years to seconds, and then multiply it by the speed of light to find the distance traveled.

First, we'll convert the time in years to days: 4.00 years * 365.25 days/year = 1461 days

Now we'll convert days to seconds: 1461 days * 24 hours/day * 60 minutes/hour * 60 seconds/minute = 31,557,600 sec

Now we can multiply the time in seconds by the speed of light to find the distance traveled: 31,557,600 sec * (1 meter / (1/299,772,458)) = 9.461*10^16 meters

To express the distance in kilometers we need to divide the distance in meters by 1000

9.46110^16 meters / 1000 = 9.46110^13 kilometers.

So, light travels 9.461*10^13 kilometers in 4.00 years.

To know more about Light

https://brainly.com/question/10728818

What do you mean by 1 3 dipolar addition reaction?

Answers

The 1,3-dipolar addition, a chemical reaction between a 1,3-dipole and a dipolarophile, results in a five-membered ring. The first 1,3-dipolar cycloadditions weren't discovered until the latter part of 19th century.

The early 20th century, following the discovery of 1, 3-dipoles. From the food our bodies digest to the way the sunlight we receive is created, chemical reaction occur all around us. Understanding physical and chemical changes is essential before beginning chemical processes. A molecule is defined as a collection of two or more atoms held together by the attractive forces known as chemical bonds; depending on the context, the term may or may not include ions that fit this criteria.

Learn more about chemical reaction here

https://brainly.com/question/29039149

#SPJ4

: identify the structures of each amino acid and classify each amino acid. the structures of each amino acid are shown.

Answers

Aliphatic, aromatic, acidic, basic, acid amide, sulfur and cyclic amino acids. Based on characteristic of functional group amino acids are classified as: polar and non-polar amino acids.

What is meant by functional?

Functional refers to an object's operation or usefulness. It also denotes that it relates to how it performs or operates.A mathematical machine known as a function accepts one or more numbers as inputs and outputs another number.One or more functions may be inputs to a functional, which outputs a number. A Functional is a function of Functions, then.All biological activities, including digestion, elimination, respiration, and others, can be performed by a cell. The functional unit of life is referred to be such for this reason. Each and every living thing is made up of cells, which are the smallest unit of life.

To learn more about  functional refer to

https://brainly.com/question/22340031

#SPJ4

which of the following solutions are acidic? select all that apply. multiple select question. O caco3 (aq)O ch3ch2cooh (aq) O h3po4 (aq) O hbr (aq) O naoh (aq)

Answers

Acidic solutions include those with HBr, H3PO4, and CH3CH2COOH.Any liquid that has more hydrogen ions per volume than water is considered acidic.

An acidic solution is what, exactly?Any liquid that has more hydrogen ions per volume than water is considered acidic; liquids with less hydrogen ions per volume are not. Acidic solution. One who or which has a pH greater than 7.0 is said to be an alkaline.An aqueous solution that has been exposed to an acid has hydrogen ions released into it. A base is something that liberates hydroxide ions. In terms of how they react with organic materials, bases are caustic and acids are corrosive.Acidic solutions include those with HBr, H3PO4, and CH3CH2COOH.Any liquid that has more hydrogen ions per volume than water is considered acidic.          

To learn more about Acidic solutions refer to:

https://brainly.com/question/24255408

#SPJ4

The density of grain alcohol is 0.789 g/mL. Given that the density of water at 4 C° is 1.00 g/mL, what is the specific gravity of grain alcohol? Enter your answer in provided box.

Answers

Density and specific gravity are related but not the same, Specific gravity is defined as the ratio of the density of a substance to the density of a reference substance. In this case, the reference substance is water, and it is commonly assumed to be water at 4°C (39.2°F) and is generally given as 1.000 g/cm3 (or 1.000 g/ml).

So, the specific gravity of grain alcohol = Density of grain alcohol / Density of water at 4°C = 0.789 g/mL / 1.00 g/mL = 0.789.

This value is dimensionless and it is used to compare the density of different substances with water.

Osmosis may be defined as the movement of a solvent through a semipermeable membrane from a region of higher solute concentration to one of lower solute concentration True False

Answers

False. Osmosis may be defined as the movement of a solvent through a semipermeable membrane from a region of lower solute concentration to one of higher concentration.

Osmosis can be defined as the movement of solvent particles or water from lower solute concentration to higher solute concentration through the semipermeable membrane. This process does not require any energy. This requires only a concentration gradient. Semipermeable membranes are very thin layers of material which allows some things to pass through them. The movement of a solvent through a semipermeable membrane from a region of higher solute concentration to one of lower solute concentration is called diffusion.

To learn more about Osmosis please visit:

https://brainly.com/question/2811191

#SPJ4

Calculate the volume in liters of a 0.12 mol/L potassium dichromate solution that contains 175. g of potassium dichromate (K,Cr₂O₂). Round your answer to 2 significant digits. OL S​

Answers

The volume of the potassium dichromate solution is 15.58 liters.

What is the molar mass of potassium dichromate?

The molar mass of potassium dichromate, also known as potassium bichromate, is 294.19 g/mol. Molar mass is the mass of one mole of a substance, which is defined as Avogadro's number of atoms or molecules. The molar mass of a substance can be calculated by adding up the atomic masses of all the atoms in its chemical formula. In the case of potassium dichromate, its chemical formula is K2Cr2O7. The molar mass is calculated by adding up the atomic masses of 2 atoms of potassium (K), 2 atoms of Chromium (Cr) and 7 atoms of Oxygen (O) (2* 39.0983 + 252.00 + 716.00 = 294.19 g/mol).

To know more about Molar Mass visit: https://brainly.com/question/22997914

#SPJ1

Two forms of butane known as n-butane and iso-butane form an equilibrium according to the reaction n-butane (g) iso-butane (g) If the equilibrium constant for this reaction is 23,which set of concentrations listed below represents an equilibrium of these two compounds? 3) (n-butane] 0.04 M [iso-butane] = 0.27 M In-butane] 0.45 M liso-butane] 0.22 M In-butane] 0.23 M liso-butane] 0,01 M In-butane] 0.02 M fiso-butane] 0.46 M

Answers

If the equilibrium constant for this reaction is 23, set (3) (n-butane] 0.04 M [iso-butane] = 0.27 M, of concentrations represents an equilibrium of these two compounds.

The equilibrium constant for a reaction is the ratio of the product concentrations to the reactant concentrations at equilibrium, raised to their stoichiometric coefficients. In this case, the reaction is:

n-butane (g) <==> iso-butane (g)

The equilibrium constant for this reaction, Kc, is defined as:

Kc = [iso-butane]/[n-butane]

Therefore, if the equilibrium constant is given as 23, then at equilibrium:

[iso-butane]/[n-butane] = 23

Out of the given sets of concentrations, only set 3) represents an equilibrium of these two compounds:

[n-butane] = 0.04 M

[iso-butane] = 0.27 M

Because:

[iso-butane]/[n-butane] = 0.27/0.04 = 6.75 which is close to the equilibrium constant of 23. The other sets of concentrations represent different ratios of [iso-butane]/[n-butane] which is not equal to 23 and thus not in equilibrium.

To know more about equilibrium please refer: https://brainly.com/question/15118952

#SPJ4

Consider the following pair of nucleophiles in CH3OH. Which, a: F- or b: N3- is the better nucleophile? Answer typing a or b. Consider the following pair of nucleophiles in CH3OH. Which, a: CH3S- or b: H2O is the better nucleophile? Answer typing a or b.

Answers

According to  the problem,Consider the following pair of nucleophiles in CH3OH. H2O is the better nucleophile.

What is the nucleophile ?

Nucleophiles are atoms or molecules that carry a negative charge and have the ability to form an electron-pair bond with a positive or partially positive atom. Common nucleophiles include hydroxide ions (OH–), amines (H2N–), and carboxylates (RCOO–). Nucleophiles are important in many organic reactions, such as substitution, elimination, and addition reactions. They are also important in biochemistry, where they facilitate enzyme-catalyzed reactions such as hydrolysis, oxidation, and reduction. In biochemistry, nucleophiles can attack the carbonaly carbon of an organic molecule, resulting in a covalent bond known as an ester or amide bond.

To learn more about nucleophile

https://brainly.com/question/14052597

#SPJ4

A sample of sodium sulfate (MM = 142.04 AMU/molecule) was found to contain 5.4 x 1018 oxygen atoms. What was the mass of the sample in AMUs?

Answers

The mass of the sodium sulfate sample is 0.00126grams.

How to calculate mass?

The mass of a substance can be calculated by multiplying the number of moles in the substance by its molar mass as follows:

mass = no of moles × molar mass

According to this question, a sample of sodium sulfate (MM = 142.04 amu/molecule) was found to contain 5.4 x 10¹⁸ oxygen atoms. The number of moles can be calculated as follows:

no of moles = 5.4 × 10¹⁸ ÷ 6.02 × 10²³ = 0.89 × 10-⁵ moles = 0.0000089moles

mass = 0.0000089moles × 142.04 amu/molecule

mass = 0.00126grams.

Learn more about mass at: https://brainly.com/question/16386473

#SPJ1

reaction 1: reaction 2: reaction 3: the chemical equations and equilibrium expressions for two reactions at the same temperature are given above. based on the information, which of the following expressions can be used to calculate the value of for reaction 3 at the same temperature? (a) (b) (c) (d)

Answers

The expression for K3 = 1K1×1K2 when the chemical equations and equilibrium expressions for two reactions at the same temperature are given.

A rate law illustrates how a chemical reaction's rate is influenced by the reactant's concentration. For a reaction like aA -> A, the rate law frequently takes the form rate = k[A]n, where k is the proportionality constant known as the rate constant and n is the order of the reaction.

Given the reactions as:

CO(g)+3H2(g)⇄CH4(g)+H2O(g)

the rate law for the above equation is (K1) = [CH4][H2O]/[CO][H2]^3

Then [H2]^3 = [CH4][H2O]/K1[CO]

CO2(g)+H2(g)⇄CO(g)+H2O(g)

the rate law for the above equation is (K2) = [CO][H2O]/[CO2][H2]

[CO2] = [CO][H2O]/K2[H2]

CH4(g)+2H2O(g)⇄CO2(g)+4H2(g)

Similarly the rate law for the above equation is (K3) = [CO2][H2]^4/[CH4][H2O]^2

Then K3 = [CO][H2][CH4][H2O][H2O]/K2[H2]K1[CO]

Then K3 = 1K1×1K2

To learn more about equilibrium click here https://brainly.com/question/29359391

#SPJ4

complete question: Reaction 1:CO(g)+3H2(g)⇄CH4(g)+H2O(g),  K1=[CH4][H2O][CO][H2]3 . Reaction 2:CO2(g)+H2(g)⇄CO(g)+H2O(g), K2=[CO][H2O][CO2][H2]. Reaction 3:CH4(g)+2H2O(g)⇄CO2(g)+4H2(g)then K3=?

The chemical equations and equilibrium expressions for two reactions at the same temperature are given above. Based on the information, which of the following expressions can be used to calculate the value of K3 for reaction 3 at the same temperature?

elect all that apply which of the accompanying depictions show the electron distribution in the h2o molecule correctly? select all that apply. multiple select question. a b c d

Answers

Tetrahedral H2O has an electrical geometry, Water is classified as tetrahedral in terms of electron-group geometry since it has four electron groups.

Which statement most accurately characterizes a covalent species with four electron groups revolving around the primary atom?Two bonded pairs and two lone pairs result in a bent shape being visible. - A tetrahedral system has all four electron pairs acting as bonding partners.Tetrahedral H2O has an electrical geometry.A quantitative way to express binding polarity is the dipole moment. When the electron density is unevenly distributed within a bond or molecule, a dipole moment results.Water is classified as tetrahedral in terms of electron-group geometry since it has four electron groups.            

To learn more about Water refer to:

https://brainly.com/question/1313076

#SPJ4

chemistry slay bslay slay slay

Answers

The third term of the sequence is 19. The term to term rule when we reverse the order of the sequence is subtract 13 then divide by 6.

How to find terms in a sequence?

The sequence has three terms. Its term to term rule is as follows:

multiply by 6 and then add 13.

The first term of the sequence is -2.

By using the rule the third term can be found as follows:

Second term:

-2 × 6 + 13 = - 12 + 13 = 1

Third term

1 × 6 + 13 = 6 + 13 = 19

Therefore, the first three terms are as follows:

-2, 1, 19

Now, let's reverse the three terms of the sequence,

19, 1, -2

Therefore, the term to term rule of the sequence is as follows:

subtract 13 then divide by 6

Learn more on sequence here:

brainly.com/question/26151197

#SPJ1

match each soluble ionic compound with the number of moles of ions formed when 1 mole of each compound is dissolved into water. cacl2 cacl2 drop zone empty. nabr nabr drop zone empty. fe(no3)3 fe(no3)3 drop zone empty. 3 moles of ions 4 moles of ions 2 moles of ions need help? review these concept resources.

Answers

3 moles, 2 moles, 4 moles. soluble ionic compound with the number of moles of ions formed when 1 mole of each compound is dissolved into water. cacl2 cacl2 drop zone empty.

nabr nabr drop zone empty. fe(no3)3 fe(no3)3 drop zone empty. 3 moles of ions 4 moles of ions 2 moles of ions need help review these concept resources.Moles (nevi) are a form of skin growth that is rather frequent. Clusters of pigment-forming cells lead them to look as tiny, dark brown dots (melanocytes). The majority of people have 10 to 40 moles that form during childhood and adolescence and may alter or vanish over time. A non-cancerous condition of pigment-producing skin cells that is generally known as birth markings or moles.This form of mole is frequently big and is caused by a disease involving melanocytes, or pigment-producing cells (melanin). Melanocytic nevi can be rough, flat, or elevated in appearance. They might be present at birth or appear later in life. Melanocytic nevi can develop malignant in rare cases.

learn more about moles  here:

https://brainly.com/question/26416088

#SPJ4

three, two, and four moles An ideal gas combination is made up of 4 moles of hydrogen, 2 moles of helium, and 1 mole of water vapour. What is the mixture's molar specific heat at a constant

Why are you asking this I wonder. Are you uncertain as to whether the term "hydrogen" refers to hydrogen molecules or hydrogen atoms (H)? (H2)

The query contains a hint: molar mass

We are dealing with the macro world which is the one in which we reside, and in this world, "hydrogen exists as H2 molecules. There has a 2 g/mol molar mass.

If a question reads "You are dealing with atoms while dealing with hydrogen atoms

You are working with molecules if an inquiry asks about "hydrogen molecules

Since hydrogen occurs as molecules in the larger universe, you are dealing with molecules if an inquiry asks, "hydrogen

Learn more about moles of hydrogen here:

https://brainly.in/question/25363072

#SPJ4

H₂O + SO3 → H₂SO4
Why is this a synthesis reaction?

Answers

This is a synthesis reaction because 2 types of molecules are being combined together to form one molecule.

The amount of emitted photons detected by a PMT is directly proportional to the amount of time the detector is allowed to acquire light. Herb is making fluorescence measurements when his Xe source explodes. He is able to scrounge up an old Xe source he can use put it only has 42 percent of the power output of his original source. If his original scan time was 1.25 seconds, what will his scan time be with the new source?

Answers

If his original scan time was 1.25 seconds, 3 seconds will be his scan time be with the new source.

What is photon?

The discrete packet (or quantum) containing electromagnetic (as well as light) energy known as a photon is referred to as a photon. In a vacuum, which is a region that is entirely empty, photons are always moving at the same speed as light to everyone observers.

Number of photons detected = (Power output of source) x (Scan time)

Power output of new source = 0.42 x Power output of original source

Number of photons detected = (Power output of new source) x (New scan time)

Number of photons detected = (0.42 x Power output of original source) x (New scan time)

Number of photons detected = (Power output of original source) x (1.25 seconds)

dividing both side by Power output of original source to get:

(New scan time) = (Number of photons detected) / (0.42 x Power output of original source)

(New scan time) = (1.25 seconds) / (0.42)

(New scan time) = 3 seconds

Therefore, 3 seconds will be his scan time be with the new source, if his original scan time was 1.25 seconds.

To know more about photon, here:

https://brainly.com/question/12015967

#SPJ1

2Na + Cl2 → 2NaCl

1 mol Na = 22.990 g Na

1 mol Cl2 = 70.906 g Cl2

1 mol NaCl = 58.443 g NaCl

How many grams of NaCl could you make with 1.5 moles of Na?

a
112.45 g
b
87.665 g
c
23.125 g
d
38.962 g

Answers

The correct choice is B) 87.665g

How do I even answer and draw this? Can someone answer this for me please

Answers

ewhat grade is this

Explanation:

Other Questions
what are the parts of the male structure of a flower? Consider Earth to be stationary, and the moon as orbiting Earth in a circle of radius R. If the masses of Earth and the Moon are ME and Mm, respectively, which of the following best represents the total mechanical energy of the Earth-Moon system? igor wants to set margins for a worksheet he has created per his choice. which of these will he select as x and y in the series of clicks to do so: page layout tab > page setup > x > margins drop-down list > y > specify choice for top, header, left, right, bottom and footer text boxes > ok? At Chocolatier Incorporated, there are two factors that determine the cost of healthcare. If an employee makes less than $65,000 per year, he pays$52 per month forindividual coverage and $98 per month for family coverage. If an employee makes atleast $65,000 per year, individual coverage is $67 per month and family coverage is$122 per month.a) Graham makes $62,800 per year. He has individual health care. His yearly contributionis 10% of the total cost. How much does his employer contribute?b) Claudia s annual salary is $75,400. She has family health care. Her employercontributes $1,052 per month toward her total coverage cost. What percent doesClaudia contribute toward the total coverage? Round to the nearest tenth of a percent. 4 Ways the Westward expansion had an effect on the native Americans Lewis is a state court judge. Like other judges, Lewis often refers to secondary sources of law for guidance. These sources include:1. official comments to statues2. others states' statutes3. state constitutions4. the U.S. Constitution bag a has 2 yellow marbles,2 red marbles,and 3 blue marbles picking from bag a is certain,likely,unlikely,impossible This type of muscle blends into tendinous insertions that attached to bones pulling them which produces the desired movement question 5 in the video welcome to people, process and operating system fundamentals for cybersecurity, alex states that to be effective, a cybersecurity analyst must posses which two (2) types of skills? (select 2) Kate's food budget for the month is R700. The first week she spent R189,75, the second week she spent R203,20 and the third week she spent R146,95. How much does she have left for the last week? which statements indicate that the nurse leader is adapting changes in leadership practices | to changes in health care systems? select all that apply. one, some, or all responses may GeometryA drawer contains 12 white socks and 8 black socks. You randomly choose 1 sock and do not replace it. Then you randomly choose another sock. a. What is the probability of selecting a white sock first and then a black sock?b. What is the probability of selecting two white socks? c. What is the probability of selecting two black socks? scientist have conducted experiments to test the hypothesis into passive What are the three main types of irony which of them are used in this story how?. Linger time i the amount of time a peron typically pend on any one particular item in the mueum. How did the linger time for "Dynamic Sun" compare with other exhibit at the Air and Space Mueum? I need help fast please!! What is a computer network?A) computers that are able to schedule meetingsB) a printer, scanner, or other peripheralsC) two or more connected computersD) a computer used by television executives Explain the usages and properties of these 6 organic compounds. This _____ resource organizes the drugs by classifications and off-label drug uses but has no pictures of the medications. - You have a total of 10 coins consisting of nickels and dimes in yourpocket. The value of the coins is $0.70. Write and solve a system of linearequations to find the numbers of nickels and dimes in your pocket.