it is necessary to determine the solubility equilibrium constants of the specific salts in both water and hydrochloric acid in order to make a more accurate prediction.
When an insoluble salt is added to a hydrochloric acid solution, the acid will react with the salt to form a soluble chloride salt and a weak acid. The weak acid formed will then react with water to form its conjugate base and hydronium ions, which will increase the acidity of the solution.
Therefore, in general, the solubility of insoluble salts is expected to increase in hydrochloric acid solution compared to pure water solution due to the increased acidity. However, the degree to which the solubility increases will depend on the specific insoluble salt and its solubility equilibrium constants in both water and hydrochloric acid.
In some cases, the increased acidity may not have a significant effect on the solubility of the salt, while in other cases, the solubility may increase significantly.
To learn more about hydrochloric acid visit:
brainly.com/question/15102013
#SPJ11
a reversible reaction involving chemicals in a variety of physical states can reach a(n) equilibrium. endothermic
It is true that a reversible reaction involving chemicals in a variety of physical states can reach equilibrium, whether it is endothermic or exothermic.
At equilibrium, the rates of the forward and reverse reactions are equal, and the concentrations of reactants and products remain constant over time. The equilibrium constant (Kc) is a measure of the extent to which a reaction proceeds towards products or reactants at equilibrium, and it depends on the temperature and pressure conditions of the system. It is true that a reversible reaction involving chemicals in a variety of physical states can reach equilibrium, whether it is endothermic or exothermic.Exothermic is a term used to describe a chemical reaction that releases heat energy to the surroundings. In an exothermic reaction, the products formed have less energy than the reactants, and the difference in energy is released as heat. This heat can be felt as an increase in temperature or as the emission of light or sound.Examples of exothermic reactions include combustion reactions, such as the burning of fuels like wood or gasoline, which release heat and light. Another example is the reaction between sodium hydroxide and hydrochloric acid, which releases heat and produces water and salt. Exothermic reactions are often used in applications such as energy production and heating.
To know more about exothermic visit :
https://brainly.com/question/31214950
#SPJ11
An unknown substance is placed in a graduated cylinder of water. The substance immediately sinks to the bottom. What could the density of the substance be?
If a liquid is less dense than the liquid it is placed in, it will float. An unidentified material is added to a graded water cylinder. The stuff hits the bottom right away. Mass/volume equals density.
When placed in water, an object will float if its density is lower than that of the water, whereas it will sink if its density is higher. The density of a material is a distinguishing quality that is independent of the substance's volume. This assertion is supported by the Archimedes principle. This is due to the fact that the buoyant force pulling on the object is smaller than its weight. The object floats on the liquid's surface if its density is less than or equal to that of the liquid.
Read more about unknown substance at
https://brainly.com/question/2384930
#SPJ4
Which one of the following thermodynamic quantities is not a state function?a. workb. enthalpyc. entropyd. internal energye. free energy
The correct answer is (a) work. A state function is a property that depends only on the current state of the system and not on the path taken to reach that state.
In other words, the value of a state function is determined by the initial and final states of a system and not the process used to get there. Enthalpy, entropy, internal energy, and free energy are all examples of state functions because they are determined solely by the initial and final states of a system. Work, on the other hand, is not a state function because it depends on the path taken to get from the initial to the final state. The amount of work done on or by a system can vary depending on the details of the process used to change the system's state.
To learn more about work, click here:
https://brainly.com/question/31050706
#SPJ11
Calculate the energy required to take 600.0 gram sample of liquid water at 30 C° is heated until half of it boils away
Okay, here are the steps to calculate the energy required to heat 600 grams of liquid water at 30 C to boil away half of it:
1) Heat capacity of liquid water at 30 C is 4.18 J/kg.K. So heat capacity of 600 grams of water is 4.18 * 0.6 = 2.51 J/K.
2) To heat water from 30 C to its boiling point at 100 C requires 40 K of temperature change. So total temperature change is 40 K.
3) Energy required to heat the water = Heat capacity * Temperature change
= 2.51 J/K * 40 K
= 100.4 J
4) Latent heat of vaporization of water at 30 C is 40.7 J/g.
5) Mass of water boiled away = 300 grams (half the original mass)
6) Energy required to vaporize 300 grams of water = 40.7 J/g * 0.3 kg
= 12.21 MJ
7) Total energy required = Energy to heat the water + Energy to vaporize the water
= 100.4 J + 12.21 MJ
= 12.31 MJ
Therefore, the total energy required to heat 600 grams of liquid water at 30 C to boil away half of it is 12.31 MJ.
Let me know if you have any other questions!
Answer: 6.69 x 10^4 joules
Explanation:
The energy required to heat the water from its initial temperature of 30°C to its boiling point of 100°C can be calculated using the specific heat capacity of water, which is 4.18 J/g°C.
So, the energy required to heat 600.0 g of water from 30°C to 100°C can be calculated as follows:
Q1 = m x c x ΔT
Q1 = 600.0 g x 4.18 J/g°C x (100°C - 30°C)
Q1 = 150,312 J
Next, we need to calculate the energy required to boil half of the water away. The energy required to vaporize water is known as the heat of vaporization and is equal to 40.7 kJ/mol. Since one mole of water is equal to 18.02 g, the heat of vaporization for water can be calculated as 2.26 kJ/g.
So, the energy required to boil away half of the water can be calculated as follows:
Q2 = m x ΔHvap
Q2 = (600.0 g / 2) x 2.26 kJ/g
Q2 = 678.0 kJ
The total energy required is the sum of Q1 and Q2:
Total Energy = Q1 + Q2
Total Energy = 150,312 J + 678,000 J
Total Energy = 6.69 x 10^5 J
Total Energy = 6.69 x 10^4 joules.
Therefore, the energy required to take a 600.0 gram sample of liquid water at 30°C and heat it until half of it boils away is 6.69 x 10^4 joules.
determine the value of kp for the following reaction if the equilibrium concentrations are as follows: p(nocl)
The value of Equilibrium constatnt Kp for the following reaction is Kp = 0,017.
In the reaction:
2NOCl(g) ⇌ 2NO(g) + Cl₂(g)
Kp = P[NO]² P[Cl₂] / P[NOCl]²
Replacing:
Kp = [0,10]² [0,081] / [0,22]²
Kp = 0,017
The Equilibrium constant Kp is determined by dividing the partial pressure of the reactants by the partial pressure of the products, and then raising the partial pressure by a factor that is equal to the substance's coefficient in the equation.
The Kp of a reaction may be impacted by a change in temperature. In general, a rise in temperature results in an increase in the Kp value, whereas a fall in temperature results in a decrease in the Kp value. This is due to the effect that temperature has on a reaction's rate and the energy needed for it to take place.
Learn more about Equilibrium constant Kp:
https://brainly.com/question/30550192
#SPJ4
The complete question is:
Determine the value of Kp for the following reaction if the equilibrium concentrations are as follows: P(NOCl)eq = 0.22 atm, P(NO)eq = 0.10 atm, P(Cl2)eq = 0.081 atm. 2 NOCl(g) ⇌ 2 NO(g) + Cl2(g)
metal sulfides are prepared by bubbling hydrogen sulfide gas, h2s , through an aqueous solution containing the metal ion, and then adjusting the ph. when the solution is saturated with h2s , which occurs when [h2s]
The answer to question is that metal sulfides can be prepared by bubbling hydrogen sulfide gas through an aqueous solution containing the metal ion, and then adjusting the pH. The process involves saturating the solution with H2S, which occurs when the concentration of H2S reaches a certain level.
At this point, the H2S gas reacts with the metal ions in the solution to form metal sulfides, which are insoluble and can be filtered and collected.
An explanation for why this method works is that metal sulfides are generally insoluble in water, which means that they can be precipitated out of solution. By adding H2S gas, which is a reducing agent, to the solution, the metal ions are reduced to their sulfide form. This reaction is favored at low pH, which means that adjusting the pH of the solution can help to promote the formation of metal sulfides. Overall, this method is a relatively simple and efficient way to prepare metal sulfides, and can be used for a wide range of metals and applications.
To know more about metal sulfides refer to
https://brainly.com/question/24223923
#SPJ11
Which can act as a Brønsted-Lowry acid?HCO3-SO4 2-BCl3CH4
In the Brønsted-Lowry theory of acids and bases, an acid is defined as a substance that donates a proton (H+), while a base is defined as a substance that accepts a proton. Therefore, to determine which of the given compounds can act as a Brønsted-Lowry acid, we need to identify which compounds are capable of donating a proton.
HCO3- (bicarbonate) can act as a Brønsted-Lowry acid because it can donate a proton to a base. For example, in water, HCO3- can donate a proton to form H2CO3 (carbonic acid). SO4 2- (sulfate) cannot act as a Brønsted-Lowry acid because it is a negatively charged ion and cannot donate a proton. BCl3 (boron trichloride) can act as a Brønsted-Lowry acid because it can donate a proton to a base. For example, in the presence of a Lewis base such as ammonia (NH3), BCl3 can donate a proton to form NH4+ and BCl4-. CH4 (methane) cannot act as a Brønsted-Lowry acid because it does not have a proton to donate.
To know more about proton
https://brainly.com/question/1481324
#SPJ11
Saturated hydrocarbons whose carbon atoms are arranged in an open chain.
The type of hydrocarbons you are referring to are known as alkanes, which are saturated hydrocarbons with carbon atoms arranged in an open chain.
This means that the carbon atoms in alkanes are connected by single bonds, and each carbon atom has the maximum number of hydrogen atoms attached to it. Alkanes are important compounds in organic chemistry and are used as fuels and solvents. The term "saturated" refers to the fact that each carbon atom is bonded to the maximum number of hydrogen atoms, which results in a stable and non-reactive molecule.
To know more details about hydrocarbons refer to
https://brainly.com/question/27220658
#SPJ11
olive oil is a choose... , so it contains mostly choose... fatty acids. these fatty acids have choose... intermolecular forces and choose... melting points.
Olive oil is a healthy choice as it is a good source of monounsaturated fatty acids. These fatty acids have relatively weak intermolecular forces and lower melting points compared to saturated fatty acids.
This means that olive oil is liquid at room temperature, making it easier for our bodies to digest and absorb the nutrients. Monounsaturated fatty acids also have a positive impact on our health, as they can help lower cholesterol levels, reduce inflammation and protect against heart disease. Additionally, olive oil is rich in antioxidants and anti-inflammatory compounds, which further contribute to its health benefits. Therefore, incorporating olive oil into your diet can be a great way to promote overall health and wellbeing.
To know more about acid visit:
https://brainly.com/question/14072179
#SPJ11
What does it mean when the measured e°cell value is negative?.
When the measured e°cell value is negative, it indicates that the reaction is not spontaneous and requires energy input to proceed.
This means that the reduction half-reaction has a higher standard electrode potential than the oxidation half-reaction. The negative value indicates that the system is at a lower energy state than when the standard state is achieved, and the reaction is not favorable without an external energy source.
A negative E°cell value indicates that the cell reaction is non-spontaneous under standard conditions. This means that the reaction will not occur spontaneously, and an external source of energy is needed for the reaction to proceed. The E°cell value is determined by comparing the reduction potentials of the two half-reactions involved in the cell, and a negative value suggests that the overall cell reaction is not energetically favorable.
Learn more about E°cell here,
https://brainly.com/question/30258805
#SPJ11
what goes in bottom left box in a punnet square of gibbs free energy?
In a punnet square of Gibbs free energy, Delta S values are on top. Delta H is are on the side.
The electricity associated with a chemical reaction that can be used to do work. The loose electricity of a tool is the sum of its enthalpy (H) plus the manufactured from the temperature (Kelvin) and the entropy (S) of the tool. The extrade in Gibbs energy (ΔG) is the maximum amount of loose electricity available to do useful work. If ΔG > 0, the reaction is nonspontaneous withinside the direction written. If ΔG = 0, the reaction is in a country of equilibrium. If ΔG < 0, the reaction is spontaneous withinside the direction written.
To learn more about Gibbs free energy check the link below-
https://brainly.com/question/9179942
#SPJ4
estimate (a) the maximum, and (b) the minimum thermal conductivity values (in w/m-k) for a cermet that contains 77 vol% carbide particles in a metal matrix. assume thermal conductivities of 29 and 64 w/-k for the carbide and metal, respectively.
Estimated maximum and minimum thermal conductivity values for the cermet are:
Maximum thermal conductivity = 0.77 x 29 + 0.23 x 64 = 35.33 w/m-k
Minimum thermal conductivity = 0.77 x 64 + 0.23 x 29 = 55.27 w/m-k
To estimate the maximum and minimum thermal conductivity values for a cermet containing 77 vol% carbide particles in a metal matrix, we need to use the rule of mixtures.
The rule of mixtures states that the effective thermal conductivity of a composite material can be calculated as a weighted average of the thermal conductivity values of its constituent materials, where the weight is determined by the volume fraction of each material.
In this case, we have a cermet with 77 vol% carbide particles and 23 vol% metal matrix. Using the rule of mixtures, we can estimate the maximum and minimum thermal conductivity values as follows:
(a) Maximum thermal conductivity:
The maximum thermal conductivity of the cermet would occur if all the carbide particles were perfectly aligned and in contact with each other. In this scenario, the thermal conductivity of the cermet would be equal to the thermal conductivity of the carbide particles themselves, which is 29 w/m-k.
(b) Minimum thermal conductivity:
The minimum thermal conductivity of the cermet would occur if all the carbide particles were completely dispersed within the metal matrix, with no contact between them. In this scenario, the thermal conductivity of the cermet would be equal to the thermal conductivity of the metal matrix, which is 64 w/m-k.
Therefore, the estimated maximum and minimum thermal conductivity values for the cermet are:
Maximum thermal conductivity = 0.77 x 29 + 0.23 x 64 = 35.33 w/m-k
Minimum thermal conductivity = 0.77 x 64 + 0.23 x 29 = 55.27 w/m-k
To know more about thermal conductivity, refer
https://brainly.com/question/29419715
#SPJ11
What chemical processes are used to make the synthetic product?.
This reaction showcases a chemical process called "cross-linking," wherein the sodium alginate, a polymer, forms a gel-like structure when interacting with the calcium ions in the calcium chloride solution.
In a research project on synthetic products, understanding the chemical processes involved in their creation is crucial. For instance, in the classroom example of making a gel worm, the process involves combining a sodium alginate solution with a calcium chloride solution.
The calcium ions replace the sodium ions present in the alginate, causing the long polymer chains to connect and form a more solid structure. This cross-linking process demonstrates how synthetic products can be created through controlled chemical reactions. By studying the chemical processes used to make such products, students gain a deeper understanding of the underlying principles governing their formation.
In their research project, students should focus on identifying the chemical processes, reactions, and components that contribute to the creation of synthetic products. This knowledge will enable them to better analyze and evaluate the properties, uses, and potential impacts of these products on the environment and society.
Learn more about cross-linking here:
https://brainly.com/question/30820388
#SPJ11
The full question is:
The teacher models and describes the kinds of information students will be looking for in their research project on a synthetic product. It is done by using an example of a synthetic product that students make in the classroom: a gel worm (not for eating.) Students make it by combining a sodium alginate solution with a calcium chloride solution. The teacher uses this product to model answers to the three questions students need to answer in their research. What chemical processes are used to make the synthetic product?
The 2,4-DNP test shows the presence of Choose... amines and amino acids A positive 2,4-DNP test appears as Cho aldehydes and ketones A negative 2,4-DNP test appears as Cho primary and secondary alcohols
The 2,4-DNP test shows the presence of aldehydes and ketones. A positive 2,4-DNP test appears as the formation of a yellow or orange precipitate, which indicates the presence of aldehydes and ketones. A negative 2,4-DNP test appears as no color change, which suggests the absence of aldehydes and ketones, and possibly the presence of primary and secondary alcohols, amines, or amino acids.
A positive 2,4-DNP test appears as an orange precipitate, indicating the presence of aldehydes and ketones. However, this test is not specific to aldehydes and ketones, as it can also react with other carbonyl-containing compounds such as amines and amino acids. A negative 2,4-DNP test appears as having no color change or precipitation, indicating the absence of aldehydes and ketones. This test is not applicable to primary and secondary alcohols, as they do not contain a carbonyl group that can react with the 2,4-DNP reagent.
Learn more about primary and secondary alcohols at https://brainly.com/question/1414275
#SPJ11
Describe a risk of heating flasks with burners...
When heating flasks with burners, there are a number of risks that can arise. One of the most significant risks is the potential for the flask to crack or break due to thermal shock.
This occurs when the flask is rapidly heated or cooled, which can cause it to expand or contract too quickly and lead to cracking. Another risk is the possibility of the burner flame causing an explosion if it comes into contact with a flammable substance, such as a solvent or gas. This can result in serious injury or damage to equipment. In addition, heating flasks with burners can also pose a fire hazard if proper safety precautions are not taken, such as ensuring that flammable materials are kept away from the heat source and that the burner is turned off when not in use.When heating flasks with burners, there are a number of risks that can arise. One of the most significant risks is the potential for the flask to crack or break due to thermal shock. It is important to always follow proper safety protocols when using burners to heat flasks in order to minimize these risks and prevent accidents from occurring.
learn more about thermal here
https://brainly.com/question/31517920
#SPJ11
what assumptions are you making about the temperature of gas space in the graduated cylinder? why do you think this is acceptable?
The assumptions being made about the temperature of the gas space in the graduated cylinder are that it remains constant and is equal to the ambient temperature.
This assumption is made because it simplifies calculations and measurements involving gas properties. Since most experiments are conducted under controlled conditions, it is reasonable to assume that the temperature of the gas space remains constant. Additionally, the graduated cylinder is typically exposed to the surrounding environment, allowing the gas inside to reach equilibrium with the ambient temperature.
Assuming that the temperature of the gas space in the graduated cylinder remains constant and equal to the ambient temperature is acceptable because it simplifies the analysis and is generally valid for most experimental setups.
To know more about gas properties, visit:
https://brainly.com/question/857678
#SPJ11
Why does steam produce greater burns at the same temperature?
Water lacks the vitality and warmth of steam. It will burn more than boiling water due to its dormant heat of vaporization.
The latent heat of vaporization and the heat energy of boiling water are both present in steam.
Why do burns from steam are more severe than those from boiling water?Because, at the same temperature, 100 °C, steam has more energy than water. To become vaporized, steam uses the vaporization latent heat, whereas water lacks this energy. Steam burns are more severe than those caused by water because of this latent (hidden) energy.
Latent heat :The atmosphere is heavily influenced by latent heat. This is the element that contributes to the stability of the atmosphere and the formation of convective clouds. When latent heat is taken in or released, it causes climate instability, possibly leading to extreme weather.
Learn more about latent heat :
brainly.com/question/5401454
#SPJ4
The dehydration of a secondary alcohol, like cyclohexanol, is a mechanism that occurs in two steps.First, the alcohol is protonated to leave as a water molecule, creating a cation intermediate.Then, a hydrogen ion is removed, moving the electrons from that bond to make a carbon-carbon double bond.
The dehydration of a secondary alcohol, such as cyclohexanol, typically involves a two-step mechanism.
The first step involves the protonation of the alcohol to generate a carbocation intermediate, and the second step involves the removal of a proton from a neighboring carbon atom, resulting in the formation of a double bond. This reaction is an example of an elimination reaction, which involves the removal of a small molecule, such as water, from a larger molecule.
A carbocation intermediate is a positively charged carbon atom that has only six valence electrons instead of the usual eight, which it achieves by losing a bonding pair of electrons. In organic chemistry, carbocation intermediates are often formed in reactions involving alcohols, alkyl halides, or other organic molecules. They are highly reactive and can undergo various reactions such as nucleophilic attack or rearrangement. In the context of the dehydration of a secondary alcohol, the formation of a carbocation intermediate is a crucial step in the reaction mechanism.
To know more about dehydration here
https://brainly.com/question/1301665
#SPJ4
identify each of the following polyheda. if a polyhedrom can be describe in more than one way give as many nmes as possible
A tetrahedron is a polyhedron with four faces, four vertices, and six edges. It is also known as a triangular pyramid, or a triangular bipyramid.
What is triangular ?Triangular is a shape that has three straight sides and three angles. It is one of the basic shapes in geometry. Triangles are classified according to the lengths of their sides: an equilateral triangle has all sides of equal length; an isosceles triangle has two sides of equal length; and a scalene triangle has all three sides of different lengths. Triangles can also be classified according to their angles: an acute triangle has three angles less than 90 degrees; a right triangle has one angle equal to 90 degrees; and an obtuse triangle has one angle greater than 90 degrees. Triangles are important in mathematics, as they are used in calculations for area, perimeter, and angles. They are also used in engineering, architecture, and art.
To learn more about triangular
https://brainly.com/question/28857911
#SPJ4
When using glassware with standard-taper ground-glass joints, the joints should be....
When using glassware with standard-taper ground-glass joints, it is important to ensure that the joints are clean, lubricated and correctly aligned.
Before joining two pieces of glassware with ground-glass joints, it is necessary to check both the male and female pieces for any cracks or defects that may compromise the seal. Once the pieces have been checked and confirmed to be clean and defect-free, they should be lubricated with a thin layer of vacuum grease or silicone oil. The lubricant will help to create a tight seal and prevent the joints from sticking or fusing together.
When joining the two pieces of glassware, they should be gently pushed together and twisted slightly to ensure a snug fit. It is important not to apply too much force when connecting the joints, as this can cause them to crack or break. Once the glassware is connected, it should be checked to ensure that the joints are correctly aligned and that there are no visible gaps.
In summary, when using glassware with standard-taper ground-glass joints, it is important to ensure that the joints are clean, lubricated, correctly aligned, and connected with care to avoid damage to the glassware.
learn more about glassware here
https://brainly.com/question/31626098
#SPJ11
Add a solution of AgNO3 to a saturated solution of AgCl. What happens?
(A) Nothing. (B) AgOH precipitates. (C) AgCl precipitates. (D) AgNO3 precipitates. (E) NaCl precipitates.
When a solution of AgNO3 is added to a saturated solution of AgCl, a precipitate of AgCl will form. This is because AgNO3 is a soluble salt, meaning it dissociates completely in solution into its constituent ions, Ag+ and NO3-.
On the other hand, AgCl is only slightly soluble in water, meaning it exists mostly in the solid state in solution. When Ag+ ions from the AgNO3 solution are introduced into the saturated solution of AgCl, they will react with Cl- ions to form a solid precipitate of AgCl, which will appear as a white cloudy substance in the solution. The other options listed are not expected to occur under these conditions.
To know more about saturated solution click here:
https://brainly.com/question/1851822
#SPJ11
How can you judge whether the amount of heat you apply to a reflux apparatus is sufficient but not too much? (grignard lab)
The best way to judge whether the amount of heat you apply to a reflux apparatus is sufficient but not too much is to monitor the temperature of the reaction mixture.
What is temperature?Temperature is a measure of the average kinetic energy of the particles in a substance or system. It is measured in degrees on a variety of scales, including Celsius, Fahrenheit, and Kelvin. Temperature affects the rate of chemical reactions, and can be used to measure the rate of energy transfer between objects. Temperature is an important factor in determining the properties of a system, such as its boiling point, melting point and vapor pressure. Temperature is also important for living organisms, as most organisms cannot survive in extreme temperatures.
The temperature should not exceed the boiling point of the solvent, since higher temperatures can lead to decomposition of the reactants. Additionally, the temperature should not be too low, as this could lead to slow reaction times. The ideal temperature should be between the boiling point and the freezing point of the solvent.
To learn more about temperature
https://brainly.com/question/4735135
#SPJ4
Calculate the standard heat of vaporization, , for tin(IV) chloride, SnCl4, in kJ per mole. = −511.3 kJ/mol for SnCl4 and −471.5 kJ/mol for SnCl4(g).a. 39.8b. 16.4c. 26.4d. 44.8e. 53.2
The standard heat of vaporization (∆Hvap) of SnCl4 can be calculated using ∆Hsub(SnCl4) = -511.3 kJ/mol and the enthalpy of formation of SnCl4(s), which is -714.1 kJ/mol. Therefore, ∆Hvap(SnCl4) = -511.3 kJ/mol, and the answer is (a) 39.8 kJ/mol.
The formula Hvap = Hsub + Hfus, where Hsub is the standard heat of sublimation and Hfus is the standard heat of fusion, may be used to get the standard heat of vaporisation (Hvap) for SnCl4. We can infer from the provided information that Hsub(SnCl4) = -511.3 kJ/mol. The enthalpy of production of SnCl4(g), which is -471.5 kJ/mol, may be used to compute Hfus(SnCl4), and the enthalpies of formation of the elements can be used to get Hfus(SnCl4). H°f(SnCl4(s)) = -714.1 kJ/mol is what we discover. The normal heat of fusion for SnCl4 is 0 kJ/mol since it does not undergo fusion; as a result, Hvap(SnCl4) = Hsub(SnCl4) = -511.3 kJ/mol. So, the correct response is (a) 39.8 kJ/mol.
learn more about enthalpy of formation here:
https://brainly.com/question/28302300
#SPJ11
in a space shuttle the co2 that the crew exhales is removed from the air by a reaction within canisters of lithium hydroxide on average each astronaut exhales about 20.0 mol of co2 daily what mass of water will be produced when this amount reacts with lioh
The mass of the water will be produced when the amount reacts with the LiOH is 360 g.
The chemical reaction in between the CO₂ and the LiOH is expressed as the chemical equation is as :
2LiOH + CO₂ ---> Li₂CO₃ + H₂O
The moles of the CO₂ = 20 mol
The 1 mol of the CO₂ will produce the 1 mol of the H₂O
The molar ratio are 1 : 1
The moles of the H₂O = 20 mol
The mass of the H₂O = moles × molar mass
The mass of the H₂O = 20 × 18
The mass of the H₂O = 360 g
The mass of the water that is H₂O is the 360 g.
To learn more about moles here
https://brainly.com/question/31597231
#SPJ4
when molecules move down their concentration gradient, they move from where they are blank to where they are ______.
When molecules move down their concentration gradient, they move from where they are blank to where they are higher, lower.
What is molecules ?Molecules are the smallest unit of a substance that still retains the chemical and physical properties of the original material. A molecule is made up of two or more atoms that are held together by chemical bonds. Molecules can be composed of any combination of elements, such as carbon, hydrogen, oxygen, nitrogen, and others. Molecules can be both simple, with just two atoms, or complex, with thousands of atoms forming a single molecule. Molecules can be found in everything from the air we breathe to the food we eat. Molecules are the building blocks of life, and understanding the structure and properties of molecules helps scientists gain insight into the natural world.
To learn more about molecules
brainly.com/question/26556885
#SPJ4
The amount of a sample remaining after t days is given by the equation mc004-1. Jpg, where a is the initial amount of the sample and h is the half-life, in days, of the substance. A sample contains 60% of its original amount of fermium-257. The half-life of fermium-257 is about 100 days. About how old is the sample?.
The answer to the question is that the sample is about 300 days old.
The equation given relates the amount of a sample remaining after t days to its initial amount and half-life. We're told that the sample contains 60% of its original amount, so we can set the equation equal to 0.6 times the initial amount:
0.6a = a(1/2)^(t/h)
We can simplify this by dividing both sides by a:
0.6 = (1/2)^(t/h)
To solve for t, we can take the logarithm of both sides with base 1/2:
log(0.6) = log((1/2)^(t/h))
log(0.6) = (t/h)log(1/2)
t/h = log(0.6)/log(1/2)
t/h ≈ 1.8
So the sample has decayed to 60% of its original amount after about 1.8 half-lives. Since the half-life of fermium-257 is about 100 days, the sample must be about 1.8 times 100 days, or 180 days, old.
To learn more about half-life visit:
brainly.com/question/24710827
#SPJ11
If you are given a 0. 29 g piece of sodium metal to react with water, how many moles of hcl would it take to neutralize the sodium hydroxide produced?.
The answer is that it would take 0.0126 moles of HCl to neutralize the sodium hydroxide produced from the reaction between 0.29 g of sodium and water.
To determine how many moles of HCl are needed to neutralize the sodium hydroxide produced from the reaction between sodium and water, we need to first write out the balanced chemical equation for the reaction:
2 Na (s) + 2 H₂O (l) → 2 NaOH (aq) + H₂ (g)
From this equation, we can see that for every 2 moles of sodium used, 2 moles of sodium hydroxide are produced. Therefore, we need to first calculate the number of moles of sodium in the given 0.29 g piece of sodium metal.
molar mass of sodium = 22.99 g/mol
moles of sodium = 0.29 g / 22.99 g/mol = 0.0126 mol
Since 2 moles of sodium produce 2 moles of sodium hydroxide, we can say that 0.0126 mol of sodium will produce 0.0126 mol of sodium hydroxide. This means we need 0.0126 mol of HCl to neutralize the sodium hydroxide produced.
Therefore, the answer is that it would take 0.0126 moles of HCl to neutralize the sodium hydroxide produced from the reaction between 0.29 g of sodium and water.
Learn more about neutralization reaction here:
https://brainly.com/question/30068395
#SPJ11
When would we choose to use a burner in the organic lab?
A burner is an essential tool in organic chemistry labs as it is used for various purposes such as heating, sterilization, and combustion of organic materials. The choice to use a burner depends on the specific experiment or procedure being carried out.
For example, a burner may be used to heat a reaction mixture to initiate a chemical reaction or to evaporate solvent from a solution.
In addition, a burner may be used to sterilize equipment and glassware to prevent contamination of the experiment. This is particularly important when working with microorganisms or sensitive biological samples. Burners can also be used to combust organic materials such as solid waste or excess reactants.
Overall, the use of a burner in the organic lab depends on the specific experiment and the requirements of the procedure. However, it is important to remember that safety measures must always be followed when using a burner, such as proper ventilation, appropriate clothing, and handling of the equipment with care.
learn more about burner here
https://brainly.com/question/10281181
#SPJ11
In the laboratory, a general chemistry student measured the pH of a 0.583M solution of HClO3 to be 3.862. What is the experimentally determined value of Ka for HClO3?
a. 1.37 x 10-4
b. 2.35 x 10-4
c. 3.11 x 10-7
d. 1.89 x 10-8
e. 3.24 x 10-8
The experimentally determined value of Ka for HClO3 the correct option is a, 1.37 x 10^-4.
To determine the experimentally determined value of Ka for HClO3, we need to use the equation for the acid dissociation constant:
Ka = [H3O+][ClO3-]/[HClO3]
First, we need to calculate the concentration of H3O+ ions in the solution. The pH of the solution is 3.862, so we can use the following equation to calculate the concentration of H3O+ ions:
pH = -log[H3O+]
3.862 = -log[H3O+]
[H3O+] = 10^-3.862
[H3O+] = 5.22 x 10^-4 M
Next, we need to calculate the concentration of ClO3- ions in the solution. Since HClO3 is a strong acid, it completely dissociates in water to form H+ and ClO3- ions. Therefore, the concentration of ClO3- ions is equal to the concentration of HClO3:
[ClO3-] = [HClO3] = 0.583 M
Now, we can plug these values into the equation for Ka:
Ka = [H3O+][ClO3-]/[HClO3]
Ka = (5.22 x 10^-4 M)(0.583 M)/(0.583 M)
Ka = 5.22 x 10^-4
Ka = 5.22 x 10^-4 M
Therefore, the experimentally determined value of Ka for HClO3 is option a, 1.37 x 10^-4.
To know more about experimentally click here:
https://brainly.com/question/28810130
#SPJ11
The AVREAGE global temperature has ______ during the last 50 years. Use the picture for a hint.
Increased
Decreased
Remained the same
Only increased at the Equator
The average global temperature has increased during the last 50 years. The correct answer is an option: 1.
The Earth's average surface temperature has been increasing over the past 50 years, and this trend is primarily due to human activities such as burning fossil fuels and deforestation, which release large amounts of greenhouse gases into the atmosphere. These gases trap heat from the sun, causing the Earth's atmosphere to warm up. This global warming has resulted in a range of environmental impacts, including rising sea levels, more frequent and intense heat waves, and extreme weather events, as well as changes in precipitation patterns and distribution. Correct answer: 1.
To know more about global temperature, here
brainly.com/question/9089155
#SPJ1
--The complete question is, The AVREAGE global temperature has ______ during the last 50 years.
IncreasedDecreasedRemained the sameOnly increased at the Equator --