Energy in Chemical Reactions II Unit Test
NEED HELP FAST
1. A scientist wants to perform a reaction in a vacuum chamber to control the experiment as much as possible and to prevent other variables from impacting the reaction. The scientist is trying to determine if the reaction is endothermic or exothermic and measure how much energy is absorbed or given off. Is this a valid approach? Why or why not? In three to five sentences, explain your reasoning.

2. A chemist wants to observe the following reaction:

2H2 + O2 → 2H2O

The chemist is standing inside a room with oxygen in the air and has a balloon filled with hydrogen. The chemist holds a small flame up to the hydrogen balloon. When the balloon pops, the hydrogen explodes in a ball of fire.

Based on what you know about breaking and forming bonds, explain which part of the reaction is higher in energy (i.e., does it take more energy to break the bonds of the reactants, or is more energy given off when the product bonds are formed?). Defend your answer in three to five sentences.

3. A scientist studies the bond energies of different compounds containing nitrogen (N). The scientist observes that the N–N bonds in one group of compounds have a bond energy of 209 kJ/mol, while the N–N bonds in another group of compounds have a bond energy of 418 kJ/mol. In one or two sentences, hypothesize a reason for this difference.

Answers

Answer 1

Answer:

1.) A vacuum chamber is a valid approach to control the experiment and prevent other variables from impacting the reaction. However, the scientist should be careful in interpreting the results since the reaction might be different in a vacuum than in air. A vacuum can affect the rate of reaction and the thermodynamics of the reaction, which might make it difficult to determine if the reaction is endothermic or exothermic.

2.) The reaction 2H2 + O2 → 2H2O is exothermic because it releases energy. When the bonds in the hydrogen molecule break, a large amount of energy is released, and when the hydrogen and oxygen molecules combine to form water, the energy released is greater than the energy required to break the bonds. This results in a net release of energy and makes the reaction exothermic.

3.) The difference in bond energies of N–N bonds in different compounds could be due to the presence of different chemical groups around the nitrogen atoms. These chemical groups can influence the bond strength between the nitrogen atoms, causing the bond energy to vary. Additionally, different bonding arrangements, such as single or double bonds, could also contribute to the difference in bond energy.


I would greatly appreciate Brainliest.
Have a nice day.


Related Questions

How many atoms are in 2 H2O molecules?.

Answers

There are a total of 6 atoms in 2 H2O molecules. Each H2O molecule is made up of 2 hydrogen atoms and 1 oxygen atom, which means that 2 H2O molecules contain a total of 4 hydrogen atoms and 2 oxygen atoms. This can be calculated by multiplying the number of atoms in each molecule (2 hydrogen atoms and 1 oxygen atom) by the number of molecules (2). Therefore, 2 H2O molecules contain 2 x 2 = 4 hydrogen atoms and 2 x 1 = 2 oxygen atoms, for a total of 4 + 2 = 6 atoms.

To learn more about atoms:

https://brainly.com/question/6258301

#SPJ4

Describe the structure of the berilium atom

Answers

Answer:

Beryllium as 4 protons and 5 neutrons in its nucleus giving it an Atomic Number of 4 and an atomic mass of 9. An atom of Beryllium has only 2 electrons in its outer shell.

How many moles of water molecules are in 0.100 mol of copper(II) sulphate pentahydrate?

Answers

Answer:

0.500 moles of water molecules

Explanation:

The chemical formula of copper(II) sulphate pentahydrate is CuSO4·5H2O, which means that it contains 5 moles of water molecules for every 1 mole of copper(II) sulphate. To find the number of moles of water molecules in 0.100 mol of copper(II) sulphate pentahydrate, we can multiply the number of moles of copper(II) sulphate by the coefficient of water molecules:

0.100 mol x 5 moles of water/1 mole of copper(II) sulphate = 0.500 moles of water.

so there are 0.500 moles of water molecules in 0.100 mol of copper(II) sulphate pentahydrate.

How many molecules are in 1 mole?.

Answers

There are 6.022 x10²³ molecule in 1 mole.

Multiply the number of moles by the Avogadro constant to get the total number of atoms or molecules in a sample. The equation reads as follows:

number of molecule= moles x avogadro's number

An equal amount of different gases measured at the same pressure and temperature each have the same number of molecules, and one mole of material has 6.022x10²³ atoms.

Avogadro's number is a ratio that compares the physical mass of an individual to the molar mass of an atom on an atomic scale. The quantity of elementary particles (atoms, molecules, compounds, etc.) in a mole of a substance is known as Avogadro's number. Its unit is the symbol NA and its mass is 6.022x 10²³ mol⁻¹.

Learn more about number of molecule at brainly.com/question/29769911

#SPJ4

Please help…. I don’t get any of this :(

Answers

Alex and Sam's bike have more chance to get rusted tan others especially Sam.

Why are aluminum bike frames used?

Aluminum is the most popular material used for bike frames and is renowned for having a high strength-to-weight ratio, being relatively light (though often not as light as carbon fiber), and being corrosion resistant. It is a well-liked option for riders and racers on a budget because it is also fairly priced.

A titanium frame doesn't need to be protected because a thin oxide coating builds on it to prevent further oxidation. A bare aluminum frame is more susceptible to oxidation and is hence more vulnerable to salt air. Steel is quickly oxidized. Paint is required to protect steel and aluminum frames from corrosion, however with time, paint deteriorates and cracks, exposing the frame.

Since bike chains are composed of steel, they require more frequent cleaning and lubrication than they would in a dry environment. Although the superior brake and shifter components are anodised, salt air will eventually penetrate the aluminum's surface treatment.

To learn more about oxidation use link below:

https://brainly.com/question/6816739

#SPJ1

How many grams will need to prepare a bath containing 6. 70 moles of epsom salt?

Answers

Answer:

806 grams MgSO4 (epsom salt)

Explanation:

Determine the chemical composition of epsom salt.  It is magnesium sulfate:  MgSO4.  Determine the molar mass of epsom salt by adding the individual atomic masses of each element in the salt:

1 Mg = 24.3 AMU

1 S =    32 AMU

4 O = 64 AMU

Total = 120.36 AMU

This is also the number for molar mass, just expressed as grams/mole instead of AMU.   The molar mass of MgSO4 is 120.36 grams/mole.

If we want 6.70 moles, we can multiply the molar mass by 6.70 moles:

 (6.70 moles)*(120.4 grams/mole) = 806 grams MgSO4 (epsom salt)

which property of water allows it to dissolve many substances?

Answers

The property of water that allows it to dissolve many substances is its polarity.

What is polarity?

Polarity refers to the distribution of electrical charge in a molecule. A polar molecule has an uneven distribution of electrons, resulting in a partial positive charge on one end of the molecule and a partial negative charge on the other end. This creates a dipole moment in the molecule.

Water molecules are polar, meaning that the electrons in the molecule are not distributed evenly, resulting in a partial positive charge on one end of the molecule and a partial negative charge on the other end.

This polarity allows water molecules to form hydrogen bonds with other polar or charged molecules, such as ions and polar compounds. This type of bonding allows many substances, such as salt and sugar, to dissolve in water.

Additionally, the polarity of water molecules also allows them to interact with nonpolar substances through London Dispersion Forces, which also allows some nonpolar substances to be dissolved in water.

Hence, the polarity of water allows it to dissolve many substances.

To learn more about polarity from the given link:

https://brainly.com/question/8229259

#SPJ4

What is the density of a glass fragment that has a mass of 1.5g and a volume of 0.75mL?

Answers

2gcm³ is the density of a glass fragment that has a mass of 1.5g and a volume of 0.75mL.

What is density ?

The term density is define as the ratio of mass and volume. The formula for density is d = M/V, where d is density, M is mass, and V is volume. Density is commonly expressed in units of grams per cubic centimeter.

Density = mass / volume

Given:

Density = ?

Mass = 1.5 gram

Volume = 0.75 ml

By substituting this values in give equation we get,

Density = 1.5 / 0.75

= 2 gcm³

Thus, 2 gcm³ is the density of a glass fragment that has a mass of 1.5g and a volume of 0.75mL.

To learn more about the density, follow the link;

https://brainly.com/question/29775886

#SPJ1

The pH of dil.Hcl is____ and the solution is_____

Answers

Answer:

pH of HCl solution is 1.52, which suggests that dilute HCl solution is very acidic in nature.

which law states that volume increases with temperature?

Answers

In accordance with Charles' Law, for a given quantity of gas under a constant pressure, the volume of the gas varies in a direct proportion to its absolute temperature.

What exactly are Boyle's Law and Charles Law?As the pressure lowers, the gas volume rises according to Boyle's Law. According to Charles' Law, as a gas's temperature rises, its volume expands.In accordance with Charles' Law, for a given quantity of gas under a constant pressure, the volume of the gas varies in a direct proportion to its absolute temperature. Utilizing the Kelvin scale, the absolute temperature is calculated.Charles' law states that when the temperature of a gas is raised while keeping the pressure constant, the volume of the gas also rises.In accordance with Charles' Law, for a given quantity of gas under a constant pressure, the volume of the gas varies in a direct proportion to its absolute temperature.            

To learn more about Charles' Law refer to:

https://brainly.com/question/16927784

#SPJ4

How many molecules are in 2. 0 molecules?.

Answers

Two O molecules would refer to two individual molecules of O, which stands for oxygen. Oxygen is a diatomic molecule, which means that each molecule of oxygen is made up of two atoms of oxygen (O2). So, the number of molecules in two O molecules would be two.

Two O molecules refers to two individual molecules of oxygen, which is a diatomic molecule made up of two atoms of oxygen (O2). It's a number that represents the number of molecules.

Each molecule has two atoms of oxygen. So, the number of molecules in two O molecules would be two. The statement is talking about a quantity of molecules, not a physical object or a specific set of molecules. In other words, the number 2.0 or two in this context is a representation of the quantity of oxygen molecules, not a physical object with a specific number of molecules.

Learn more about oxygen:
https://brainly.com/question/24259144

#SPJ4

A student researches how two types of rocks are formed and records the information below.
Rock Formation
Rock 1: Formed by cooling magma
Rock 2: Formed by compacting and cementing particles together
The student claims that Rock 2 is more likely to contain a fossil than is Rock 1
Which statement BEST describes the students claim?

There wasn’t a science option :(

Answers

Answer: Based on Rock Formation, the student's judgment that Rock 2 is more likely to contain a fossil than Rock 1 is appropriate.

Explanation:

Rocks are classified into three types:

Igneous rocks, metamorphic rocks, and sedimentary rocks.

Rock 1 is an Igneous Rock.

When a fiery, molten rock crystallizes and hardens, it forms igneous rocks (from the Latin root word fire).

Rock 2 is a Sedimentary Rock

At standard surface temperatures, sedimentary rock is developed at or near the Earth's surface by the build-up and lithification of sediment (detrital rock) or by precipitation from suspension (chemical rock).

Under low temperatures and pressure, rock deposits produce sedimentary rocks in the ocean and on the Earth's crust. Plants and animals die and are deposited in a sedimentary deposit.

The following are the reasons why sedimentary rocks are the only rock types that hold fossils:

The burial of deceased plants and animals by additional sediment results in the build-up of minerals from water in bones, which leads to the development of fossils.

As a result, sedimentary rocks are the only rock types that retain fossils.

To learn more about Rocks

https://brainly.com/question/19709356

A change in a substance that does not involve a change in the identity of the substance called

Answers

A physical change is a change in a substance that does not result in a change in the substance's identity.

A physical change is what?

A change in a substance that only affects its physical properties does not alter the substance's identity. Physical changes can involve a substance's state (such as when ice turns into liquid water), its size or shape (such as when it is cut or bent), or its density or texture (like when a solid is crushed or a liquid is whipped).A substance's chemical composition can change without affecting its physical properties.State transitions, such as a solid turning into a liquid or a liquid turning into a gas, may be involved in these modifications.Crushing a solid or whipping a liquid, which are examples of changes in density or texture,

To learn more about physical change refer to:

brainly.com/question/17931044?referrer=searchResults

#SPJ4

What are pollutant that caue acid precipitation to enter the air?
Select the following:
1. Drilling for natural ga
2. Burning coal
3. Tranporting petroleum

Answers

Burning coal cause acid precipitation to enter the air.

About Acid rain

Acid rain is defined as all kinds of rain with a pH below 5.6. Rain is naturally acidic (pH slightly below 6) because carbon dioxide (CO2) in the air which dissolves with rainwater has the form a weak acid . This type of acid in rain is very useful because it helps dissolve the minerals in the soil which are needed by plants and animals.

Acid rain is caused by Sulfur which is an impurity in fossil fuels as well as nitrogen in the air which reacts with oxygen to form sulfur dioxide and nitrogen oxides. These substances diffuse into the atmosphere and react with water to form sulfuric acid and nitric acid which are easily soluble so that they fall with the rainwater. This acidic rainwater will increase the acidity of the soil and surface water which will prove harmful to fish and plant life. Efforts to overcome this are currently being intensively implemented.

Learn more about acid rain at https://brainly.com/question/26775834.

#SPJ4

Predict the polarity of 6 real molecules (O2, HF, H2O, NH3, CF4, CH3F). First, draw the
molecules and any bond dipoles. Then draw any molecular dipoles. Explain your
reasoning before you check your predictions with the simulation.

Answers

Carbon dioxide,Ammonia,Oxygen,Water,Hydrogen fluoride,Nitrogen are the polarity of 6 real molecules

What are the molecular polarity?Polar molecules are those that possess regions of positive and negative charge. Water is an example of a polar material. The type of bonds it has, when coupled with its shape, gives one end of the molecule a slight positive charge (the hydrogen end) and the other a slight negative charge (the oxygen end).Like bonds, molecules can also be polar. In a polar molecule, electron density is unevenly distributed throughout the molecule, resulting in regions of partial negative charge and regions of partial positive charge.Whether a molecule is polar or nonpolar is a matter of its geometry. If one end of the molecule has a positive charge while the other end has a negative charge, the molecule is polar. If a charge is evenly distributed around a central atom, the molecule is nonpolar.

To learn more about molecular polarity refers to:

brainly.com/question/17118815

#SPJ1

How many grams are in 562 dg?

Answers

Answer:

56.2 g

Explanation:

What is the value of 2 in H2O?.

Answers

Answer:

2 of hydrogen (H)

Explanation: Because it says h is for hydrogen and 2

Which of the following pH values indicates a solution with the highest concentration of hydrogen ions? A. pH = 1, B. pH = 2, C. pH = 7, D. pH = 14.

Answers

A solution with a higher number of free hydrogen ions would have lesser pH than a solution having comparatively lower number of free hydrogen ions. Thus, the answer would be Option A i.e. pH = 1.

On the pH ( denoting potential or power of hydrogen) scale , the number which has the highest concentration of  hydrogen ions must generally be 0. This represents or marks a chemical/solution with a hydrogen ion concentration of 1 mole/liter or a solution of 1 M (Molarity). Such high concentrations/numbers of hydrogen ions are typically only found in solutions/mixtures made with a strong acid when completely dissociates in water (hydrochloric acid is an example of such solution). We generally treat the pH scale from zero(0) to fourteen (14). For each pH unit, the concentration of hydrogen ions or the number of free hydrogen ions decreases by an order of 10. However, for a solution of pH of less than 0 to exist, a higher hydrogen ion concentration than 1 M concentration would be required.

The lowest known pH is -3.6 from  which is achieved by extremely acidic mine water.

Thus, acids generally have high concentrations of hydrogen atoms.

Hence, the answer to the question would be an option with lowest pH score, which is option A.

Learn more about pH here:

https://brainly.com/question/491373

#SPJ4

Explain why your lung capacity and breathing rate are larger when you are exercising than when you are asleep

Answers

When exercising, the body requires more oxygen to fuel the muscles and produce energy. To meet this increased demand for oxygen, the lungs increase their capacity and breathing rate. This allows for more oxygen to be taken in with each breath and for the oxygen to be delivered to the muscles more quickly.

During exercise, the body's metabolism increases as the muscles need more energy to perform the exercises. As a result, the heart rate increases and the blood vessels dilate, allowing for more blood to flow through the body and deliver oxygen to the muscles. The lungs also respond to the increased demand for oxygen by increasing their capacity and breathing rate to take in more oxygen with each breath.

Additionally, the diaphragm and intercostal muscles that control the lungs' expansion and contraction also play an important role in this process. During exercise, these muscles work harder, allowing the lungs to expand more and take in more oxygen with each breath.

On the other hand, when you're asleep, the body's metabolism slows down and the muscles are at rest. So, the body doesn't need as much oxygen as it does during exercise. As a result, the lungs' capacity and breathing rate decrease, allowing for less oxygen to be taken in with each breath and for the oxygen to be delivered to the body more slowly.

In summary, when exercising the body requires more oxygen to fuel the muscles and produce energy, and the lungs increase their capacity and breathing rate to meet this increased demand for oxygen, allowing for more oxygen to be taken in with each breath and for the oxygen to be delivered to the muscles more quickly.

Usually people breathe more gradually while they are sleep, and as sleep stages progress, inhaling becomes more constant and less unpredictable. Nonetheless, studies have shown that when we are in the rapid eye movement (REM) sleep hormone, we also breathe more rapidly and unevenly.

Your lungs and cardiovascular system work quite hard while you exercise. They work together to bring oxygen into the system and get it to the working muscles. This helps your lungs work better by subsequently increases and fortifying the tissue surrounding them.

What type of elements do form ionic bonds and whyexplain why an ionic bond cannot be formed between the atoms of the same element

Answers

The ionic bonds formed in between the metals and non metals. The ionic bond is formed in between the atoms by the complete transfer of electrons.

The ionic bond is formed between the metal , which has ability to donate the electrons and the non metals , which has the tendency to accept the electron pair. The ionic bond is formed by the complete sharing of the electrons. The ionic bond cannot be formed between the atoms of the same elements because the atoms with the same electronegativity shares the electrons and form the covalent bond.

The example of the ionic bond is NaCl.

To learn more about ionic bond here

https://brainly.com/question/11527546

#SPJ4

polyatomic ions can a group of atoms have a charge ?answer key

Answers

A polyatomic ion, which is a grouping of atoms, can indeed have a charge. Monatomic ions have a charge due to an imbalance in the number of protons and electrons for the same reason.

Polyatomic ions are made up of two or more atoms that are covalently bonded, much to the structure of a neutral molecule. This cluster of covalently bonded atoms has different ratios of electrons to protons, as the name suggests. The terms "atomic ion" or "monatomic ion" can be used to refer to an ion that is made up of of one particular type of atom, with each atom having some sort of net charge, either positive or negative. the case where an ion has two or more atoms.

Learn more about molecules here

https://brainly.com/question/19556990

#SPJ4

How do you calculate 1 mole in grams?.

Answers

To calculate the mass of one mole in grams, you multiply the molar mass of the substance by Avogadro's number, which is 6.022 x 10²³. For example, the molar mass of water is 18.02 g/mol, so one mole of water would be 18.02 x 6.022 x 10²³= 1.080 x 10²⁴ grams.

A mole is a unit of measurement in chemistry that is used to express the amount of a substance. One mole is equal to Avogadro's number, which is 6.022 x 10²³ atoms, ions, or molecules.

To calculate the mass of one mole in grams, you multiply Avogadro's number with the molar mass of the substance in grammes per mole (g/mol). For example, the molar mass of water is 18.02 g/mol, so one mole of water would be 18.02 x 6.022 x 10²³ = 1.080 x 10²⁴ grams. This conversion factor is useful in determining the mass of a substance needed to react with another substance in a balanced chemical equation.

Learn more about mole:

https://brainly.com/question/29724957

#SPJ4

The smallest subatomic particle that makes up an atom, and carries a negative charge is called

Answers

An electron is the name for the smallest subatomic particle that constitutes an atom and has a negative charge.

Where can one find electrons and what do they do?

Electrons are tiny subatomic particles with a negative electric charge. They control chemical reactions and bonds and are located outside of the atomic nucleus.An electron is a subatomic particle with a negative electric charge.It is in charge of chemical reactions and bonding and can be found outside the atomic nucleus.The building blocks of electricity, known as electrons, are present in every atom. The movement of electrons through a substance is what generates electrical current.Because electrons have a relatively low mass compared to other subatomic particles, wave-particle duality in quantum mechanics applies to them.

To learn more about electron refer to:

brainly.com/question/9231327?referrer=searchResults

#SPJ4

Which is structural isomer of 3-ethyl-3-methylhexane? 3.3 diethyloctane 2,2.3,3 tctramethylpentane 2,7-dimethyloctane 2.8-dimethylnonane

Answers

2,2,3,3-tetramethylpentane is the structural isomer of 3-ethyl-3-methyl hexane.

What is a structural isomer?

Structural isomers are isomers in which the atoms are completely different in order but have the same molecular formulas.

These are molecules with the same molecular formula but different connectivity depending on the order in which they are assembled.

The structure of Alkane (C4H10) is a simple example of a structural isomer with multiple isomers.

According to the International Union of Pure and Applied Chemistry (IUPAC), structural isomerism is also known as constitutional isomerism. It is a type of isomerism in which molecules with the same molecular formula but different orders and bonding, as opposed to stereoisomerism.

Learn more about stereoisomerism here:

https://brainly.com/question/26857937

#SPJ4

name all monatomic and polyatomic ions

Answers

Monatomic Ions:
- Sodium Ion (Na+)
- Calcium Ion (Ca2+)
- Magnesium Ion (Mg2+)
- Potassium Ion (K+)
- Chloride Ion (Cl-)
- Bromide Ion (Br-)
- Sulfate Ion (SO4 2-)

Polyatomic Ions:
- Ammonium Ion (NH4+)
- Hydrogen Carbonate Ion (HCO3-)
- Nitrate Ion (NO3-)
- Phosphate Ion (PO4 3-)
- Hydroxide Ion (OH-)
- Carbonate Ion (CO3 2-)
- Sulfite Ion (SO3 2-)

What is H2O equal to?.

Answers

Answer:

2 of hydrogen (H) and 1 oxygen (O) atom.

Explanation: The chemical formula for water is H2O, which means this molecule has 3 atoms

The number of significant figures in a value is a display of the _________ of a measurement.
A. precision
B. accuracy
C. both precision and accuracy
D. none of the above

Answers

Answer:

Number two answer is accuracy

What is the kinetic energy of a 10 kg object moving with a velocity of 2m s?.

Answers

Answer:

kinetic energy = 20jouls.

Explanation:

From the question

Mass = 10kg

velocity = 2m/s

kinetic energy = ?

kinetic energy is giving by the formula

=1/2 ×mass× velocity²

=1/2 ×10 × 2²

=5 × 4

=20j

Therefore kinetic energy = 20jouls.

describe how mike seperates the unreacted magnesium from the magnesium sulfate solution.​

Answers

The method for extracting magnesium from magnesium sulphate solution described in the invention includes the following steps: decreasing stress.

How can magnesium be extracted from magnesium sulphate?

The technique described by the invention includes the following steps to recover magnesium from the a magnesium sulphate solution: Calcium sulphate, which is employed as a seed crystal, is mixed with cao and/or calcium hydroxide in (A), and magnesium sulphate solution is mixed with the ca(oh)2 and/or calcium hydroxide combination in (B).

What method of separation is applied to magnesium sulphate?

The most favoured method for separating the halite crystals from the magnesium sulphate crystals after milling is elutriation. This method involves pumping air into a container(19) containing a mixture very coarse halite and fairly fine magnesium.

TO KNOW MORE ABOUT MAGNESIUM VISIT:

https://brainly.com/question/1533548

SPJ1

Is the ending substance the same substance as the blue powder? what happened to the atoms of the starting substances when the ending substances formed? be sure to explain your answers to both of these questions.

Answers

The ending product resembles the blue powder just a little bit.

What is a simple definition of a chemical reaction?

In a chemical reaction, one or more substances—also known as reactants—are changed into one or more additional substances—also known as products. Chemical elements or chemical compounds make up substances.

The result of a chemical reaction is a different substance, and the qualities of the new material are determined by how the atoms are rearranged throughout the process. When the new material is generated as a result of the reaction, the atoms of the initial substance degrade at the end. Because the elements involved in the reaction were divided, both reactants reduced amounts of the initial materials to create the new compound.

To learn more about chemical reaction use link below:

https://brainly.com/question/11231920

#SPJ4

Other Questions
Which diagram below demonstrated balanced forces? Where did Elie live before he was deported?. in a cap-and-trade program: group of answer choices each firm is provided a fixed number of permits for a particular pollutant and no individual firm is allowed to acquire additional permits. government fixes the price of pollution rights and firms choose how many permits to purchase. government fixes the maximum amount of a pollutant that firms can discharge and issues permits that firms can buy from and sell to each other. firms can emit whatever type of pollutant they want, so long as the total tonnage does not exceed a government-established quantity. Raelyn has 33 red beads and 21 blue beads. She mixes thebeads together and uses 6 beads for each key chain shemakes. What multiplication equation and division equation canhelp Raelyn determine how many key chains she can make? plss helpp, its due soon... although freud conceptualized the libido as the life energy within the id, many people think of it as the . when pompey and crassus entered their consulship in 70 bce, there were concerns that pompey was too old and had spent too many years in lower magistracies to be effective. T/F Which of the following are buying-related activities, in contrast to selling-related activities? (Choose every correct answer.)A. Multiple select question.B. Purchasing MP3s from an online retailerC. Receiving payment from a client for a haircutD. Using a credit card at a grocery checkout counterE. Giving a barista cash for a cup of coffee Find the Area of the figure below, composed of a rectangle and two semicircles. Round to the nearest tenths place. Noah opens a savings account which gives compound interest of 2.5% peryear. He puts 4000 into it.a) How much money will Noah have in the account after 9 years?b) How much interest will Noah have earned from this account after9 years?Give your answers in pounds (L) to the nearest 1p. review your notes about basic persuasion theory. which of the following statements is incorrect about basic persuasion theory? (1.3) (2.5) (2,7) (4,9) does it represent a function Frances Ellen Watkins Harper was a free Black woman who contributed to the abolitionist movement by Which of the following is a solution to the equation below 4x^2-9x=28A-7B-4C-7/2D-7/4 Four years is the term for the AmericanSupreme Court judgeSenatorHouse representativePresident ____are small subunits, that when combined, form polymers. cell communication is critical for the function of both unicellular and multicellular eukaryotes. which of the following is likely true of cell signaling? responses cell signaling uses the highest molecular weight molecules found in living cells. cell signaling uses the highest molecular weight molecules found in living cells. cell signaling has largely been replaced by other cell functions in higher mammals. cell signaling has largely been replaced by other cell functions in higher mammals. similar cell signaling pathways in diverse eukaryotes are evidence of conserved evolutionary processes. similar cell signaling pathways in diverse eukaryotes are evidence of conserved evolutionary processes. cell signaling functions mainly during early developmental stages. Do haikus have to be about nature?. What is the solution to the linear equation 2. 8 y 6 0. 2 y 5y 14 y 10 y 1 y 1 y 10?. What type of lens correct near-sightedness? (Myopia)A. Converging (convex)B. Converging (concave)