Energy is the energy required to destabilize existing chemical bonds and initiate a chemical reaction.

A fuel like natural gas is burned by a lot of hot water heaters. Because combustion is an exothermic reaction, the fuel's burning causes the water to heat up.

To learn more about exothermic reaction refer to:

https://brainly.com/question/2924714

#SPJ1

5.67 x 10²³ molecules of carbon dioxide contain 38.7g of gas.

One carbon atom is covalently doubly linked to two oxygen atoms in each of the molecules that make up carbon dioxide. At room temperature, it exists as a gas. In the atmosphere, carbon dioxide serves as a greenhouse gas because it absorbs infrared radiation despite being transparent to visible light.

Carbon dioxide is used as a refrigerant, in fire extinguishers, to blow coal, foam rubber and plastics, inflate life rafts and life jackets, blast coal, promote plant growth in greenhouses, immobilize animals before slaughter, and in carbonated drinks.

1 mole of ( 6.023 × 10²³ molecules ) of Co₂ is 44g

Then, 5.67 x 10²³ molecules of contain 38.7gm of gas

Thus, 5.67 x 10²³ molecules of Co₂ contain 38.7g.

To learn more about carbon dioxide, follow the link;

https://brainly.com/question/3049557

#SPJ1

Eukaryotic cells, in contrast to prokaryotic cells, have a membrane-bound nucleus. multiple rod-shaped chromosomes, a large number of membrane-bound organelles, including the golgi apparatus.

Eukaryotic cells are distinguished by their membrane-enclosed organelles and organized nucleus. Plants, animals, fungus, and protists are a few examples of eukaryotic cells. Their genetic material is organized by chromosomes.

Within eukaryotes, organelles perform specialized tasks such power generation, photosynthesis, and membrane synthesis. The majority of them are membrane-bound organelles that serve as the locations of particular metabolic reactions. The presence of a nucleus encircled by a sophisticated nuclear membrane characterizes eukaryotic cells.

To know more about Eukaryotic cell visit:

https://brainly.com/question/11351358

#SPJ4

The set of items listed which can transform the chemical energy into the mechanical energy is the battery, wire, fan blades turning.

The chemical energy of the item is transformed into the mechanical energy by the arrangement of batteries, wire, and fan blades turning. In the wire, the movement of ion is observed, which causes the movement of fan blades. And this turning of fan blades convert chemical energy to mechanical energy.

In the engine combustion, chemical energy is first converted to heat energy, which causes the expansion of a fluid into a motion. In the contrast, motor proteins convert chemical energy in the molecule to the useful mechanical work.

Therefore, the set of items listed which can transform the chemical energy into the mechanical energy is the battery, wire, fan blades turning. Hence, option c is correct.

Your question is incomplete. The complete question is

Which set of items listed can be arranged to transform chemical energy into mechanical energy?

A. motor, fan blades turning, wire

B. magnet, wire, fan blades turning

C. battery, wire, fan blades turning

D. battery, magnet, heat

To know more about mechanical energy

https://brainly.com/question/29509191

#SPJ4

Besides nylon, other product is formed from the reaction of adipoyl chloride and 1,6-diaminohexane is nylon6,6 polyamide

Nylon is the any numerous strong tough elastic synthetic polyamide material that are fashioned into fiber, filament, bristle or sheet and used especially in textile and plastics and a solution of adipoyl chloride in cyclohexane is poured on top an aqueous solution of 1,6 diamino hexane in a beaker and nylon 6,6 polyamide is formed at the interface of two immiscible liquids and is carefully drawn from the solution and placed on a glass rod

Know more about adipoyl chloride

https://brainly.com/question/29360596

#SPJ4

addition of potassium hydroxide slightly increases the pH .

What is buffer solution ?

A buffer is a solution that can withstand changes in pH due to the addition of acidic or basic components. It can neutralize small amounts of added acids or bases and keep the pH of the solution relatively stable. This is important for processes and reactions that require a specific and stable pH range. Buffers have a working pH range and capacity that determines how much acid/base they can neutralize before their pH changes, and how much they change. Both of the two components (conjugate acid and conjugate base) are present in significant amounts and can neutralize small amounts of other acids and bases (in the form of H3O+ and OH-), thus withstanding pH changes. increase. Added to the solution. To illustrate this effect, we can consider a simple example of a buffer made from hydrofluoric acid (HF) and sodium fluoride (NaF). Hydrofluoric acid is a weak acid due to the strong attraction between the relatively small F ions and solvated protons (H3O+), which prevents complete dissociation in water.

To learn more about the buffer solution , click the link given ;

https://brainly.com/question/26416276

#SPJ4

value for δu is 20 kj when a system that is absorbing 30 kj of heat and is doing 10 kj  work done.

Data given that work done by the system and heat is absorbed by the system.

Therefore,

q=30 kj

w=−10kJ

Now from first law of thermodynamics,

ΔU=q+w

=ΔU=30+(−10)=20kJ

=Uf​−Ui​=6⇒Uf​=(Ui​+20)

δu=20 kj

First Law of Thermodynamics: The change in total internal energy of a particular system between two states is described by the first law of thermodynamics. The first law of thermodynamics states that when heat is introduced to a system or when work is done, the total internal energy will change.

A positive result when calculating work done indicates that the system releases energy into the environment while performing work. If the value is negative, the environment's work on the system has contributed energy to it.

To know more about  work done visit : https://brainly.com/question/10678395

#SPJ4

Matter are anything that is made up of atoms. The quantity of matter can be observed only on the basis of mass and volume calculation. Therefore,  earth's core is the layer of earth is liquid with the highest density.

Matter is a substance that has some mass and can occupy some volume. The matter is mainly used in science. Matter can be solid, liquid or gas.

Matter is anything that is made up of atoms. Anything around us that can be physically seen and touched are matter. Ice, water and water vapors are example of matter.

The liquid layer of the Earth's core, made of iron and nickel, that lies beneath the Mantle and surrounds the inner Core.

Therefore, earth's core is the layer of earth is liquid with the highest density.

To learn more about matter, here:

https://brainly.com/question/4562319

#SPJ1

Guanine bond with cytosine in a complimentary strand of DNA.

Nitrogenous bases, additionally called nucleobases, are nitrogenous compounds that shape an crucial part of the nucleotides. Nucleotides are constructing blocks of DNA and RNA that are composed of a sugar, nitrogenous base and a phosphate organization.

A fixed of five nitrogenous bases is used in the construction of nucleotides, which in flip increase the nucleic acids like DNA and RNA. These bases are crucially crucial because the sequencing of them in DNA and RNA is the manner records is stored.

Under ordinary conditions, the nitrogen-containing bases adenine (A) and thymine (T) pair together, and cytosine (C) and guanine (G) pair collectively. The binding of these base pairs paperwork the shape of DNA .

Learn more about Nitrogen base here:-https://brainly.com/question/14120811

#SPJ4

Option - b is answer.

KCl(aq) + AgNO₃(ag) → KNO₃(aq) + AgCl(s) is example for precipitation reactions.

The chemical reaction between potassium chloride and silver nitrate, which results in the precipitation of solid silver chloride, is one of the best illustrations of precipitation reactions. The precipitation reaction resulted in the formation of this insoluble salt.

In a precipitation reaction, dissolved substances combine to create one or more solid products. This type of reaction occurs frequently and is also known as double displacement, double replacement, or metathesis reactions because it frequently involves the exchange of ions between ionic compounds in aqueous solutions.

To know more about precipitation reaction visit:

https://brainly.com/question/27924812

#SPJ1

Neutrons striking nuclei

A single large nucleus breaking apart

Two small nuclei forming

When a large, unstable nucleus absorbs a slow-moving neutron, it splits into two smaller nuclei and additional neutrons, which is known as nuclear fission.

The mass difference between the starting nucleus and the end product, which occurs during the process, is transformed into a significant amount of energy using Einstein's equation:

E = Δmc²

When two tiny nuclei come together to form a bigger nucleus, nuclear fusion takes place.Because the final nucleus' mass is less than the sum of the original nuclei's masses during the process, Einstein's equation states that this mass difference is transformed into a significant amount of energy:

E = Δmc²

Now that we have examined each claim, we can determine which one solely applies to nuclear fission: nuclear fission is the only process that results from neutrons striking nuclei.

only true for nuclear fusion when there are two tiny nuclei merging together.large-scale energy release – relevant to both fission and fusion exclusively true for nuclear fission:

a single massive nucleus rupturing only true for nuclear fission when two tiny nuclei form.

Learn more about nuclear fission:

https://brainly.com/question/28541683

#SPJ4

An example of molecule that cannot be represented by a single Lewis structure is Ozone (O₃).

A Lewis Structure may be defined as the representation of electrons of an atom with the help of dots and symbols. The symbols are used for representing initials of atom and dots are used for electrons. If there is a molecule, which is to be represented as Lewis's structure, then the bonds are shown with the help of straight line. However, there are some atoms which cannot be represented by a single Lewis structure. For those atoms different resonating structures are drawn. Resonating structures are different Lewis structures f similar molecule or atom in which delocalization of electrons takes place. These structures are drawn because a single Lewis structure is unable to explain all the properties of the molecule.

Learn more about Lewis structure at:

brainly.com/question/1407731

#SPJ4

Hello..!

¿What is Ecosistema Lentico?

It is one that presents a closed structure and that its waters are permanently stagnant.

Are:

Answer:

Lentic Ecosystem

Explanation:

We know that higher the object more will the potential energy,

Same way we can say that The potential energy of an electron is high when the electrons are excited

and jumps from lower energy orbital to the higher energy orbitals and goes farther away from the nuclear attraction region.

The formula to find the energy of electron at nth shell is given in the figure.

We know that electron carries a negative charge.

If you put a charged particle in motion and change its direction, it will radiate energy.

But electrons behave like waves, and these waves helps us know the probability of finding electrons i.e. orbitals that we label as s, p, d, and f orbitals.

Being in the orbitals of a particular shell, electron's energy will be limiting due to counter nuclear forces.

Electron as to leave atom, or an say nuclear region to attain its highest energy.

To know more about electron:

brainly.com/question/1255220

#SPJ4

(D) 769 KJ energy evolved during the reaction of 48.7 g of Al, according to the reaction given.

Mass of aluminium (Al) = 48.7 g

Molar mass of aluminum (Al) = 27 g/mol

Heat of reaction = -852 KJ

Energy evolved = ?

Write the balanced chemical equation

    Fe₂O₃(s) + 2 Al(s)    →    Al₂O₃(s) + 2 Fe(s)

Calculate the number of moles of Al

    number of moles = mass / molar mass

Put the values

    number of moles of aluminum = 48.7 g / 27 g/mol

    number of moles of aluminum = 1.8037 mol

It is clear that the number of moles of Fe₂CO₃ is half of Al, divide the number of moles of Al by 2

    number of moles of Fe₂CO₃ = 1.8037 / 2

    number of moles of Fe₂CO₃ = 0.90185

    heat of reaction for 1 mole of Fe2CO3 = 852 KJ

    heat of reaction for 0.90185 moles of Fe₂CO₃ = 0.90185 mol × 852 KJ

    heat of reaction for 0.90185 moles of Fe₂CO₃ = 769 KJ

The complete question is attached.

You can also learn about heat of reaction from the following question:

https://brainly.com/question/2192784

#SPJ4

The bonding in the aluminum chloride is closer to that of the chlorate ion in structure.

We know that sometimes, we can not be able to describe the properties of a compound or an ion or indeed any kind of chemical specie by just a single chemical structure. In that case, we would have to have recourse to a mix of structures that are able to show how the specie can be able to participate in a chemical reaction.

A close look at the carbonate ion and the nitrate ion would show us that the charge that is carried by the specie is delocalized over a number of atoms and such we can not be able to use only a single structure to explain the bonding that occurs in the ions.

On the other hand, the aluminium chloride is a compound that is ionic in nature. The bonding in the compound would look more like that of the chlorate ion which does not have the same molecular complexity as does the carbonate ion.

Learn more about the carbonate ion:https://brainly.com/question/22530423

#SPJ1

Hydrogen has only one electron, the only force that matters (in a classical approximation) is that which exists between the positively charged nucleus and the single negatively charged electron.

The negatively charged electrons in a multi-electron atom repel one another. This phenomenon, which we refer to as "electron screening," often increases the energy of all orbital energy levels and divides the energy of a shell's subshells.

The many discrete energy levels (or, energy states) for an atom, ion, or molecule are depicted in an energy level diagram. Only electronic states, only vibrational states, or both electronic and vibrational states may be depicted in an energy level diagram.

A Jablonski diagram is one sort of energy level diagram that shows both the electronic states of an atom, ion, or molecule and the electronic transitions between these states that these entities might experience. The states are piled vertically, with the states with greater energies being stacked higher. Several stacks with the same spin multiplicity states may be included in the figure (e.g., singlet-singlet or triplet-triplet states).

To know more about energy level diagram, visit:

https://brainly.com/question/21219604

#SPJ4

80 calories are required to melt 1 gram of ice. (The energy required to elevate one gram of water by one degree Celsius is one calorie.) - The solidification process is what turns liquid into ice. 80 calories per gram will be released throughout this procedure.

This issue is meant to provide you an estimate of the amount of heat required per gram of solid water, or ice, in order for a solid to liquid phase change to occur. Simply put, a measurement of the amount of heat needed to melt one kilogram of ice at its typical melting point of 0 degrees Celsius is provided. Therefore, you could conclude that 80cal/g is similar to 80cal of It took 0C of heat to turn 1 g of ice from a solid to a liquid. Thus, 3 g of ice would require 3 g x 8 cal / 1 g / 240 cal. So, keep in mind this notation. 80cal per gram. g1means that by applying 80cal of heat, every 1 g of ice at 0°C can be transformed into liquid water at 0°C.

To know more about Calorific value, viist-https://brainly.com/question/19580135

#SPJ4

Increasing order of electronegativity Scandiun < copper < Selenium

b. Polonium < oxygen < sulfur

c. Francium < cesium < rubidium.

Electronegativity, symbolized as χ, is the tendency for an atom of a given chemical detail to attract shared electrons while forming a chemical bond. An atom's electronegativity is tormented by each of its atomic wide varieties and the distance at which its valence electrons reside from the charged nucleus.

Electronegativity is a chemical belonging that describes the tendency of an atom or a practical organization to attract electrons toward itself. The electronegativity of an atom is tormented by both its atomic quantity and the distance that its valence electrons reside from the charged nuclei.

Learn more about electronegativity here:-https://brainly.com/question/24977425

#SPJ1

A mixture of nitrogen, oxygen, fluorine, and neon are in a container which has a tiny, tiny pinhole leak. The element leaks the slowest from the container is fluorine.

The effusion of gas is expressed as follows :

rate ∝ 1 / √M

rate of effusion is inversely proportional to the square root of molecular weight.

molecular weight of nitrogen = 14amu

molecular weight of oxygen = 16 amu

molecular weight of fluorine = 19 amu

the rate of effusion with increase of molecular weight. so the elements leaks the slowest from the container is fluorine.

Thus, A mixture of nitrogen, oxygen, fluorine, and neon are in a container which has a tiny, tiny pinhole leak. The element leaks the slowest from the container is

To learn more about effusion here

https://brainly.com/question/5272713

#SPJ1

The enthalpy change per kilogram of hydrogen is -120 kJ/ g H2

What is enthalpy of a reaction?

A chemical reaction's change in enthalpy that takes place under a constant pressure is known as the "heat of reaction" or "enthalpy of reaction." It is a helpful thermodynamic unit of measurement for figuring out how much energy per mole is emitted or created during a reaction. Enthalpy is a state function as well because it is created by pressure, volume, and internal energy, all of which are state functions.

The reaction is,

2H2(g)+O2(g) = 2H2O(g) H=-484 kJ

The molar weight of hydrogen, which is represented in the equation as H2, is 2.02 g/mol. According to the equation, 2 mol of H2 produce 484 kJ of heat. The heat evolved per gram of hydrogen is calculated by dividing this by the 2 mol H2 and the 2.02 g/mol H2:

(-484 kJ/2 mol H2)(1 mol H2/2.92 g H2) = -120. kJ/g H2

Hence, the enthalpy change per kilogram of hydrogen is -120 kJ/ g H2

To know more about enthalpy of the reaction from the given link

https://brainly.com/question/15516625

#SPJ4

Atoms that are unable to pass one another become free to migrate during state shifts such as sublimation and melting. While atoms also have a tendency to clash when a solid material melts.

This allows them to slip past one another. As a result, we may say that as an object melts or sublimation, its state changes, allowing atoms that can't travel past one another to do so. A substance can transfer directly from the solid to the gas state through sublimation, bypassing the liquid step. A substance can change its phase from a solid to a liquid by the physical process of melting or fusion. When the solid's internal energy increases, usually as a result of the application of heat causes melting.

Learn more about sublimation here

https://brainly.com/question/29304516

#SPJ4

Answer: C0- 1 copper atom, 2 nitrogen, 6 oxygen atoms.

(NH4)3PO4- 12 atoms of hydrogen, three atoms of nitrogen, one atom of phosphorus, and four atoms of oxygen

NH42Cr- 1 molecule of ammonium dichromate,

AlNO3- a-1  n-3 o-9

NH4NO3- n- 2  h-4 o-3

Explanation:

Answer: Atom

Have a good day!

The substrate is a cyclohexane ring. There will be six different alkenes produced when the cyclohexane ring is treated with a strong base.

What is alkenes?
Alkenes are a common family of hydrocarbons discovered in crude oil. There is at least one carbon-carbon double bond in this family. This double bond significantly alters the chemistry of the family's compounds.

Alkenes, and ethene in particular, play a crucial role in the chemical industry. They are created through the cracking of the alkanes but are not present in significant amounts in crude oil. Like all hydrocarbons, alkenes burn in the presence of air to produce carbon dioxide and water. Ethene reacts violently in oxygen, making it ineffective as a fuel. Additionally, the alkenes are too useful for the production of plastics and numerous other chemicals that are used as fuels in the chemical industry.

To learn more about alkenes
https://brainly.com/question/24270289
#SPJ1

Trees and plants use the energy from the sun and the carbon dioxide in the air to create the food they need to survive and develop through a process called photosynthesis.

In addition to plants that have chlorophyll, photosynthesis is a mechanism that uses sunlight to help plants produce food.

A process known as photosynthesis occurs when the chlorophyll on a plant's leaves absorbs sunlight and uses it to change carbon dioxide and water into oxygen, hydrogen (water), and glucose. This glucose can then be used by the plant again or stored in the fruit.

Learn more about photosynthesis here,

brainly.com/question/29362121

#SPJ4

the reported molar concentration of the sodium hydroxide solution will be too high when is used for the standardization of the naoh solution.

The term "standardization" in scientific or analytical chemistry means the process of determining standards or concentrations of a particular substance.

One of the benefits of standardization, and the most important one, is that you get results with minimal error.

.A standard solution has an accurately known concentration and for this experiment sodium hydroxide was standardized with a primary standard acid, potassium hydrogen phthalate. A primary standard could be any pure chemical that can be used as the initiation of a quantitative analysis.

If the khp is only 90% pure, the real mass of the acid will be less than weighed doing less the real moles of potassium hydrogen phthalate. Thus, in titration, volume of NaOH will be less than real volume and reported molar concentration will be too high.

learn more about standardization https://brainly.com/question/26659980

#SPJ4

Except DNA all the rest molecules have been synthesized in experiments similar to the ones performed by miller and urey.

To know more about experiment visit:

https://brainly.com/question/11256472

#SPJ4