Evaluate. Be sure to check by differentiating. ∫e9x+8dx ∫e9x+8dx= (Type an exact answer. Use parentheses to clearly denote the argument of each function).

Therefore, the indefinite integral of ∫6x(9−x)dx is [tex]27x^2 - 2x^3 + C[/tex], where C is a constant.

To find the indefinite integral of ∫6x(9−x)dx, we can expand the expression and then integrate each term separately:

∫6x(9−x)dx = ∫[tex](54x-6x^2)dx[/tex]

Using the power rule for integration, we have:

∫54xdx =[tex](54/2)x^2 + C_1[/tex]

[tex]= 27x^2 + C_1[/tex]

∫[tex]-6x^2dx = (-6/3)x^3 + C_2 \\= -2x^3 + C_2[/tex]

Combining the results, we have:

∫6x(9−x)dx[tex]= 27x^2 - 2x^3 + C[/tex]

To check our work, we can differentiate the obtained result:

[tex]d/dx (27x^2 - 2x^3 + C) = 54x - 6x^2[/tex]

which matches the original integrand 6x(9−x).

To know more about indefinite integral,

https://brainly.com/question/31969670

#SPJ11

To measure the amount of water in a bird bath, the appropriate metric unit would be liters, as it is commonly used to measure liquid volume. Liters provide a precise measurement for the quantity of water.

In the U.S. customary system, the appropriate unit would be gallons. However, gallons are not listed as an option in the given choices. Therefore, the U.S. customary unit cannot be selected from the available options. Liters are a suitable choice because they provide a precise measurement for the quantity of water.

It's important to note that the choice of unit depends on the desired level of precision and the system of measurement being used. In this case, grams, kilometers, miles, ounces, and quarts are not appropriate units for measuring the amount of water in a bird bath.

To learn more about liters click here : brainly.com/question/32866481

#SPJ11

The value of the curvature κ(x) = 10 sec^2 x tan x /[1+25 sec^4 x]^3/2.

To find the curvature using the formula κ(x)=|f"(x)|/[1+(f’(x))^2]^3/2 with the function y = 5 tan x, we need to differentiate y twice and substitute the values in the formula.

Given function is y = 5 tan x.

The first derivative of y = 5 tan x is: y' = 5 sec^2 x.

The second derivative of y = 5 tan x is: y'' = 10 sec^2 x tan x.

Substitute the value of f"(x) and f'(x) in the formula of curvature κ(x) = |f"(x)|/[1+(f’(x))^2]^3/2 :κ(x) = |10 sec^2 x tan x|/[1+(5 sec^2 x)^2]^3/2κ(x) = 10 sec^2 x tan x /[1+25 sec^4 x]^3/2

Therefore, the value of the curvature κ(x) = 10 sec^2 x tan x /[1+25 sec^4 x]^3/2.

To know more about curvature visit:

brainly.com/question/33155369

#SPJ11

To find A, 6, and the frequency range within 500Hz ≤ f ≤ 1000Hz such that x₁[n] = x₂[n], we need to match the frequency and phase components of the sampled signals x₁[n] and x₂[n] using the given formulas and sampling rate.

In the given problem, x₁(t) is a signal composed of two cosine functions with different frequencies and phases. We are given x₁(t) = 5 cos(2π(400)t + 0.5π) + 10 cos(2π(500)t - 0.5).

To obtain x₁[n], we sample x₁(t) at a rate of fs = 900Hz, using the sampling period Ts = 1/fs = 1/900. Similarly, for x₂(t), we have x₂(t) = A cos(2πft + p), where f is the frequency and p is the phase.

To match x₁[n] and x₂[n], we need to find A, 6, and the frequency range within 500Hz ≤ f ≤ 1000Hz.

First, we determine the frequency and phase of x₁[n]. The given signal x₁(t) has frequency components of 400Hz and 500Hz. When sampled at fs = 900Hz, the frequency components get aliased, which means they fold back into the Nyquist range.

To find the aliasing frequencies, we use the formula f_alias = |f - k*fs|, where k is an integer. In this case, for the 400Hz component, we have f_alias = |400 - k*900|, and for the 500Hz component, we have f_alias = |500 - k*900|.

Next, we match the frequencies by setting f_alias = f within the given frequency range. Solving these equations, we find that f = 500Hz is the frequency that satisfies the condition.

Finally, we determine the value of A by comparing the amplitudes of the matched frequency components in x₁(t) and x₂(t). By comparing the coefficient of the cosine function, we find that A = 5.

In summary, to make x₁[n] = x₂[n], we set A = 5, f = 500Hz, and consider the frequency range 500Hz ≤ f ≤ 1000Hz. These values ensure that the sampled signals x₁[n] and x₂[n] have matching frequency components and equal values at each sample point.

Learn more about sampled signals

brainly.com/question/33182434

#SPJ11

The revenue function given is R(x) = 100x - 0.001x² + 0.00003x³ dollars per unit. The production level is raised from 1,100 units to 1,700 units.

Let's start by finding the revenue generated by producing 1,100 units:

R(1,100) = 100(1,100) - 0.001(1,100)² + 0.00003(1,100)³

        = 110,000 - 1.21 + 4.2

        = 108,802.79 dollars

Now, let's find the revenue generated by producing 1,700 units:

R(1,700) = 100(1,700) - 0.001(1,700)² + 0.00003(1,700)³

        = 170,000 - 4.89 + 10.206

        = 175,115.31 dollars

Thus, the correct option is a)551,366,000.

To know more about production visit :

https://brainly.com/question/30333196

#SPJ11

To evaluate the integral ∫[0 to 5] (8e^x + 10cos(x)) dx, we will find the antiderivative of each term and apply the definite integral limits. The result will be expressed as a rounded decimal.

To evaluate the integral, we first find the antiderivative of each term individually. The antiderivative of 8e^x is 8e^x, and the antiderivative of 10cos(x) is 10sin(x). We then apply the definite integral limits by subtracting the antiderivative evaluated at the upper limit from the antiderivative evaluated at the lower limit.

For the term 8e^x, the antiderivative is 8e^x. Evaluating this at the upper limit (5) gives us 8e^5. Evaluating it at the lower limit (0) gives us 8e^0, which simplifies to 8.

For the term 10cos(x), the antiderivative is 10sin(x). Evaluating this at the upper limit (5) gives us 10sin(5). Evaluating it at the lower limit (0) gives us 10sin(0), which simplifies to 0.

Finally, we subtract the result of the antiderivative at the lower limit from the result at the upper limit: (8e^5 - 8) + (10sin(5) - 0). Simplifying this expression will give us the numerical value of the integral, which will be rounded to the appropriate decimal.

Learn more about integral here:

https://brainly.com/question/31433890

#SPJ11

The value of y is 24.

Non of the given option is correct.

To find the value of y in the given triangle, we can apply the Pythagorean theorem.

The Pythagorean theorem states that in a right-angled triangle, the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the lengths of the other two sides.

In the given triangle, we have a right angle and one leg of length 12. The other leg has a length of 12√3. Let's assume y represents the length of the hypotenuse. Applying the Pythagorean theorem, we have:

(12)^2 + (12√3)^2 = y^2

144 + 432 = y^2

576 = y^2

Taking the square root of both sides, we get:

y = √576

y = 24

Non of the given option is correct.

For more questions on Pythagorean theorem

https://brainly.com/question/343682

#SPJ8

The production level that will maximize profit is approximately 741.67 units.

Given the cost function C(x) = 3750 + 890x + 1.2x² and the demand function p(x) = 2670, the production level that will maximize profit is obtained as follows:

Profit function, P(x) = R(x) - C(x), where R(x) = xp(x)

Since p(x) = 2670,

R(x) = xp(x) = 2670x

Substituting R(x) and C(x) in the profit function, we have:

P(x) = 2670x - (3750 + 890x + 1.2x²)

P(x) = - 1.2x² + 1780x - 3750

To maximize profit, we need to find the value of x that will give the maximum value of P(x).

Maximizing P(x) is equivalent to minimizing -P(x).

So, we find the derivative of -P(x) and equate it to zero.

Then, we solve for x to obtain the production level that will maximize profit.

That is, -P'(x) = 0.

-P'(x) = 0, implies that 2.4x - 1780 = 0.

Hence, 2.4x = 1780. So, x = 1780/2.4.

Thus, the production level that will maximize profit is approximately 741.67 units.

Answer: Therefore, the production level that will maximize profit is approximately 741.67 units.

To know more about function, visit:

https://brainly.com/question/30721594

#SPJ11

Therefore, to yield the maximum profit, 235 units must be produced and sold.

To find the number of units that must be produced and sold in order to yield the maximum profit, we need to consider the profit function. The profit function is given by subtracting the cost function from the revenue function.

Given:

Revenue function R(x) = 6x

Cost function [tex]C(x) = 0.01x^2 + 1.3x + 20[/tex]

The profit function P(x) is obtained by subtracting the cost function from the revenue function:

P(x) = R(x) - C(x)

[tex]= 6x - (0.01x^2 + 1.3x + 20)[/tex]

To find the maximum profit, we need to determine the value of x that maximizes the profit function P(x). We can do this by finding the critical points of P(x) and evaluating their second derivatives.

Taking the derivative of P(x) with respect to x:

P'(x) = 6 - (0.02x + 1.3)

Setting P'(x) equal to 0 and solving for x:

6 - (0.02x + 1.3) = 0

0.02x = 4.7

x = 235

To determine whether x = 235 corresponds to a maximum or minimum, we can take the second derivative of P(x).

Taking the second derivative of P(x) with respect to x:

P''(x) = -0.02

Since the second derivative P''(x) is negative for all x, the critical point x = 235 corresponds to a maximum.

To know more about maximum profit,

https://brainly.com/question/30887890

#SPJ11

The missing terms are s = 6, a = 6.

To evaluate the given expression, we need to find the missing terms.

The expression is Σ6(2)n-1, where n starts from 1.

To find the missing terms, let's calculate the first few terms of the series:

When n = 1:

6(2)^1-1 = 6(2)^0 = 6(1) = 6

When n = 2:

6(2)^2-1 = 6(2)^1 = 6(2) = 12

When n = 3:

6(2)^3-1 = 6(2)^2 = 6(4) = 24

Based on the pattern, we can see that the terms of the series are increasing. Therefore, we can represent the series as:

s = 6, 12, 24, ...

The missing terms in the expression are:

a = 6 (the first term of the series)

d = 6 (the common difference between consecutive terms)

So, the missing terms are s = 6, a = 6.

for such more question on series

https://brainly.com/question/29062598

#SPJ8

The discounted rental cost of all equipment is RM 22.50.

Roro Beach Shop is a shop that provides rental services in Pangkalan Balak, Melaka. It offers various equipment such as snorkeling gear, beach chairs, life jackets, umbrellas, etc.

The rental cost of each item is different. Suppose, a tourist wants to rent snorkeling gear, beach chair, life jacket, and umbrella. The rental cost for each item is RM 10, RM 5, RM 7, and RM 3, respectively.The rental cost of each item will be added up to find the total rental cost of all equipment. Then, the discount of 10% will be calculated if tourists rent for more than 4 hours.

The formula to find the rental cost of equipment is:

Total rental cost = (rental cost of snorkeling gear) + (rental cost of beach chair) + (rental cost of life jacket) + (rental cost of umbrella)

Now, let's calculate the rental cost of equipment and total rental cost. Rental cost of snorkeling gear = RM 10Rental cost of beach chair = RM 5Rental cost of life jacket = RM 7Rental cost of umbrella = RM 3Total rental cost = RM 10 + RM 5 + RM 7 + RM 3= RM 25

If tourists rent equipment for more than 4 hours, a discount of 10% will be given. Therefore, the rental cost of equipment will be: Discounted rental cost = 90% of the total rental cost Discounted rental cost = (90 / 100) × RM 25= RM 22.50

The total rental cost of all equipment is RM 25. If tourists rent equipment for more than 4 hours, a discount of 10% will be given.

Therefore, the discounted rental cost of all equipment is RM 22.50.

To know more about equipment visit:
brainly.com/question/14702531

#SPJ11

The limit of x(π-2tan^(-1)(5x)) as x approaches infinity does not exist.

To evaluate the limit, we can analyze the behavior of the expression as x becomes infinitely large. Let's simplify the expression: x(π-2tan^(-1)(5x)) = xπ - 2xtan^(-1)(5x).

The first term, xπ, grows indefinitely as x approaches infinity. However, the behavior of the second term, -2xtan^(-1)(5x), is more complicated. The function tan^(-1)(5x) represents the inverse tangent of (5x), which has a maximum value of π/2. As x becomes larger, the inverse tangent approaches its maximum value, but it does not exceed it. Thus, multiplying it by -2x does not change the fact that it remains bounded.

Therefore, as x tends to infinity, the second term approaches a finite value, while the first term grows infinitely. Since the expression does not converge to a specific value, the limit does not exist.

Learn more about limit here:

https://brainly.com/question/12207539

#SPJ11

It is incorrect to say that the sum of a rational and an irrational number is always irrational (A) or always rational (B). Similarly, it is incorrect to say that the sum is never irrational (C). The correct statement is that the sum of a rational and irrational number is sometimes a rational number (D).

The correct answer is D. The sum of a rational and irrational number is sometimes a rational number.

To understand why, let's consider an example. Let's say we have a rational number, such as 2/3, and an irrational number, such as √2.

When we add these two numbers together: 2/3 + √2

The result is a sum that can be rational or irrational depending on the specific numbers involved. In this case, the sum is approximately 2.94, which is an irrational number. However, if we were to choose a different irrational number, the result could be rational.

For instance, if we had chosen π (pi) as the irrational number, the sum would be:2/3 + π

In this case, the sum is an irrational number, as π is irrational. However, it's important to note that there are cases where the sum of a rational and an irrational number can indeed be rational, such as 2/3 + √4, which equals 2.

for more search question sum

https://brainly.com/question/30442577

#SPJ8

The first system (i) [tex]\(y[n] = 5x[n] + 8x[n-3]\) for \(n \geq 0\)[/tex] is non-causal, while the second system (ii) [tex]\(y[n] = 9x[n-1] + 7x[n+1] - 0.5y[n-1]\) for \(n \geq 0\)[/tex] is causal.

To determine whether a system is causal or non-causal, we need to examine the range of values for the time index n in the system's equations.

(i) [tex]\(y[n] = 5x[n] + 8x[n-3]\) for \(n \geq 0\):[/tex]

In this system, the output y[n] at any time index n depends on the input x[n] and the delayed input x[n-3].
The presence of the term x[n-3] indicates that the system depends on the input's future values. Therefore, this system is non-causal.

(ii) [tex]\(y[n] = 9x[n-1] + 7x[n+1] - 0.5y[n-1]\) for \(n \geq 0\)[/tex]

In this system, the output y[n] at any time index n depends on the input x[n-1], the input x[n+1], and the delayed output y[n-1].
All the terms involve either the current or past values of the input or output. There is no dependency on future values. Therefore, this system is causal.

Learn more about causal system here:

https://brainly.com/question/32685220

#SPJ11

The length of MH in parallelogram MATH with diagonals MT and AH intersecting at E is 32.

Hence option C is correct.

To solve this problem,

We need to use the fact that the diagonals of a parallelogram bisect each other.

Let's call the length of MT "x" and the length of AH "y".

Since MT and AH intersect at E,

We can use the fact that they bisect each other to set up two equations:

AT + TH = 2x ..... (1)

AM + MH = 2y ....(2)

We know that AT = 8x - 2,

so we can substitute that into equation (1) and simplify:

8x - 2 + TH = 2x

6x = TH + 2

TH = 6x - 2

We also know that AM = TH,

Since they are opposite sides of a parallelogram.

So we can substitute that into equation (2) and simplify:

TH + MH = 2y

6x - 2 + MH = 2y

MH = 2y - 6x + 2

Now we need to eliminate y from the equation.

To do that, we need another equation that relates x and y.

We can use the fact that opposite angles of a parallelogram are congruent:

angle MTH = angle HAT

Since these angles are vertical angles, they are congruent. So we can set up an equation:

5x + 8 = 8x - 2

3x = 10

x = 10/3

Now we can substitute this value of x back into our equation for TH:

TH = 6(10/3) - 2

     = 18

And we can substitute both x and TH back into our equation for MH:

MH = 2y - 6x + 2

MH = 2(18) - 6(10/3) + 2 = 32

So the length of MH is 32, which means the answer is (C).

To learn more about parallelograms visit:

https://brainly.com/question/11037270

#SPJ4

The complete question is attached below:

The sequence {a_n} defined by a_1 = 5 and a_(n+1) = √(5a_n) is investigated. The explanation below provides insights into the behavior of the sequence.

To investigate the sequence {a_n}, we start with a_1 = 5 and recursively compute the terms using the formula a_(n+1) = √(5a_n). By substituting the value of a_n into the formula, we can find the next term in the sequence. For example, a_2 = √(5a_1) = √(5*5) = √25 = 5. Similarly, we can find a_3, a_4, and so on. As we continue this process, we observe that each term is equal to the previous term, indicating that the sequence remains constant.

Therefore, the sequence {a_n} is a constant sequence, where all terms are equal to 5.

Learn more about substituting here: brainly.com/question/24807436

#SPJ11

The effectiveness of each method depends on the characteristics of the differential equation. Integration works for equations that can be directly integrated, e^rt is useful for linear homogeneous equations, separation of variables is applicable to first-order equations, and the Laplace transform is suitable for linear equations with constant coefficients.  

(a) Integration: This method works for problems where the equation can be directly integrated. By integrating both sides of the equation, we can find the antiderivative and obtain the general solution. However, not all differential equations can be solved through integration alone, especially those that involve nonlinear or higher-order terms.

(b) e^rt: This method is effective for solving linear homogeneous equations with constant coefficients. By assuming a solution of the form y = e^rt and substituting it into the differential equation, we can determine the values of r that satisfy the equation. However, it may not work for nonlinear or non-homogeneous equations.

(c) Separation of variables: This method works well for first-order ordinary differential equations that can be separated into two variables. By rearranging the equation and integrating each side separately, we can find the solution. However, it may not be applicable to higher-order differential equations or equations with nonlinear terms.

(d) Laplace transform: The Laplace transform method is suitable for solving linear ordinary differential equations with constant coefficients. By applying the Laplace transform to both sides of the equation and manipulating the resulting algebraic equation, we can obtain the solution. However, it may not be practical for solving certain boundary value problems or equations with complicated initial conditions.

Learn more about antiderivative here:

https://brainly.com/question/33243567

#SPJ11

It can be influenced by various factors and can be financed through capital inflows and serve as an indicator of economic growth and specialization.

Deriving the identity for a country as a net borrower to the world:The national income identity (Y = C + I + G + X − M) represents the total output (Y) of an economy, which is divided into consumption (C), investment (I), government spending (G), exports (X), and imports (M). By rearranging the terms, we can derive an identity that shows how a country can be a net borrower from the rest of the world:

Y − C − G = I + (X − M)

This equation states that the difference between total output (Y) and domestic consumption (C) and government spending (G) represents the country's savings (S) or investment (I). The term (X - M) represents the current account balance, which is the difference between exports (X) and imports (M). If the current account balance is negative, indicating that imports exceed exports, then the country is a net borrower from the rest of the world.

Factors contributing to a net borrower position to the rest of the world:

Several factors can contribute to a country being a net borrower from the rest of the world. These include:

a) Low domestic savings: If a country has a low domestic savings rate, it will need to rely on borrowing from foreign sources to finance investment and consumption.

b) High investment needs: Countries that require significant investment in infrastructure, technology, or capital goods may need to borrow from abroad to fund these investments.

c) Trade imbalances: Persistent trade deficits, where imports consistently exceed exports, can lead to a net borrower position as the country needs to finance the shortfall by borrowing from foreign sources.

d) Fiscal deficits: Large government budget deficits, where government spending exceeds tax revenue, can also contribute to a net borrower position as the government needs to borrow to finance its spending.

Why a large trade deficit may not necessarily be a cause for concern:

A large trade deficit, while often seen as an economic imbalance, may not necessarily be a cause for concern for an economy due to the following reasons:

a) Capital inflows: A trade deficit can be financed by attracting foreign capital inflows, such as foreign direct investment or portfolio investments. These inflows can help stimulate economic growth, create jobs, and support domestic investment.

b) Comparative advantage: A trade deficit can be a result of a country specializing in certain industries where it has a comparative advantage while importing goods in which it lacks efficiency. This allows the country to focus on producing and exporting goods in which it is most competitive.

c) Consumption and investment: A trade deficit can be driven by robust domestic consumption and investment, which are indicators of a growing economy. This suggests that the country is attracting capital and utilizing imports to meet the demands of its expanding economy.

d) Currency dynamics: A trade deficit can be influenced by currency exchange rates. If a country's currency is relatively strong, it may lead to higher imports and a trade deficit. However, this can also attract foreign investments and boost the country's export competitiveness in the long run.

Learn more about divided here:

https://brainly.com/question/15381501

#SPJ11

To find the derivative dy/dx of the function y = √(5/x + 7), we need to use the chain rule. The derivative of y with respect to x can be obtained by differentiating the function inside the square root and then multiplying it by the derivative of the expression inside the square root with respect to x.

Let's differentiate the function y = √(5/x + 7) using the chain rule. The chain rule states that if we have a composite function y = f(g(x)), then the derivative of y with respect to x is given by dy/dx = f'(g(x)) * g'(x).

In this case, f(u) = √u and g(x) = 5/x + 7. Therefore, we have:

dy/dx = f'(g(x)) * g'(x).

First, let's find the derivative of f(u) = √u, which is f'(u) = 1/(2√u).

Next, let's find the derivative of g(x) = 5/x + 7. Using the power rule and the constant multiple rule, we get g'(x) = -5/x^2.

Now, we can substitute these derivatives into the chain rule formula:

dy/dx = f'(g(x)) * g'(x) = (1/(2√(5/x + 7))) * (-5/x^2).

Simplifying, we have:

dy/dx = -5/(2x^2√(5/x + 7)).

Therefore, the derivative dy/dx of the function y = √(5/x + 7) is -5/(2x^2√(5/x + 7)).

Learn more about chain rule here:

https://brainly.com/question/30764359

#SPJ11

The total amount of sales is approximately Rs. 870000.

Let's break down the problem step by step to find the total amount of sales.

Let's denote the total annual sales as "S" in rupees.

According to the given information:

The agent receives a commission of 10% on the total annual sales.

The agent also receives a bonus of 2% on the excess of sales over Rs. 20000.

The total amount of commission and bonus is Rs. 104000.

To calculate the commission and bonus, we can set up the following equation:

Commission + Bonus = Rs. 104000

The commission can be calculated as 10% of the total sales:

Commission = 0.10S

The bonus is applicable only on the excess of sales over Rs. 20000. So, if the sales exceed Rs. 20000, the bonus amount can be calculated as 2% of (Total Sales - Rs. 20000):

Bonus = 0.02(S - 20000)

Substituting the values of commission and bonus in the equation:

0.10S + 0.02(S - 20000) = 104000

Simplifying the equation:

0.10S + 0.02S - 400 = 104000

0.12S = 104400

Dividing both sides of the equation by 0.12:

S = 104400 / 0.12

S ≈ 870000

Therefore, the total amount of sales is approximately Rs. 870000.

for such more question on total amount

https://brainly.com/question/25109150

#SPJ8

Question

a commission of 10% is given to an agent on the total annual sales with the addittion of bonus 2% on the excess of sales over rs. 20000 if the total amount of commission and bonus is rs.104000 find the total amount sales

Using Newton's method with an initial approximation of x₁=1, the third approximation to the root of the equation x⁵−x−7=0 is approximately x₃=1.8200.

Newton's method is an iterative numerical method used to approximate the roots of an equation. It starts with an initial approximation, in this case x₁=1, and then improves the approximation by using the formula:

xₙ₊₁ = xₙ - f(xₙ) / f'(xₙ)

where f(x) is the equation we are trying to find the root of, and f'(x) is its derivative. For the equation x⁵−x−7=0, the derivative is 5x⁴-1.

Using the initial approximation x₁=1, we can calculate x₂, the second approximation, using the formula above. Then, we repeat the process to find x₃, the third approximation. Continuing this iterative process, we approach a more accurate value for the root of the equation.

By performing the calculations, we find that x₃ is approximately equal to 1.8200, rounded to four decimal places. This value is a closer approximation to the actual root of the equation.

For more information on approximation visit: brainly.in/question/39337472

#SPJ11

The position function for the given velocity and initial position is r(t) = (1/11)e^11t i - (1/25)cos(5t^2) j + (1/6)(t^2√(t^2+4) - 4) k + 7i + 4j + k.

The position function r(t) can be found by integrating the given velocity function v(t) with respect to time.

In two lines, the final answer for the position function r(t) is:

r(t) = (1/11)e^11t i - (1/25)cos(5t^2) j + (1/6)(t^2√(t^2+4) - 4) k + 7i + 4j + k.

Now let's explain the answer:

To find r(t), we integrate each component of the velocity function v(t) separately with respect to t. For the x-component, the integral of e^11t with respect to t is (1/11)e^11t. Therefore, the x-component of r(t) is (1/11)e^11t.

For the y-component, the integral of tsin(5t^2) with respect to t is obtained using a substitution. Let u = 5t^2, then du/dt = 10t. Rearranging gives dt = du / (10t). Substituting into the integral, we have ∫ sin(u) * (1/10t) * du = (1/10) ∫ sin(u) / t du = (1/10) ∫ sin(u) * (1/u) du. This integral is a well-known function called the sine integral, which cannot be expressed in terms of elementary functions.

For the z-component, we integrate tsqrt(t^2+4) with respect to t. Using a substitution u = t^2+4, we have du/dt = 2t, which gives dt = du / (2t). Substituting into the integral, we get ∫ u^(1/2) * (1/2t) * du = (1/2) ∫ (u^(1/2)) / t du = (1/2) ∫ (u^(1/2)) * (1/u) du = (1/2) ∫ u^(-1/2) du = (1/2) * 2u^(1/2) = u^(1/2) = sqrt(t^2+4).

Adding up the components, we obtain the position function r(t) = (1/11)e^11t i - (1/25)cos(5t^2) j + (1/6)(t^2√(t^2+4) - 4) k + C, where C is the constant of integration. Given the initial position r(0) = 7i + 4j + k, we can find the value of C by plugging in t = 0. Thus, C = 7i + 4j + k.

Hence, the complete position function is r(t) = (1/11)e^11t i - (1/25)cos(5t^2) j + (1/6)(t^2√(t^2+4) - 4) k + 7i + 4j + k.

Learn more about integral here:

https://brainly.com/question/31433890

#SPJ11

Option A. Answer: A) c(t) = 2040 + 17,400t - 43.5t².Given that a widget factory produces n widgets in t hours of a single day. The number of widgets the factory produces is given by the formula,n(t) = 10,000t - 25t², 0 ≤ t ≤ 9

and the cost, c, in dollars of producing n widgets is given by the formula c(n) = 2040 + 1.74n.

We need to find the cost c as a function of time t that the factory is producing widgets.

To find the cost c as a function of time t that the factory is producing widgets, we substitute n(t) in the formula of c(n) as follows;

c(t) = 2040 + 1.74 × [n(t)]c(t)

= 2040 + 1.74 × [10000t - 25t²]c(t)

= 2040 + 17400t - 43.5t²

Hence, the cost c as a function of time t that the factory is producing widgets is

c(t) = 2040 + 17,400t - 43.5t²,

which is option A. Answer: A) c(t) = 2040 + 17,400t - 43.5t².

To know more about factory produces visit:

https://brainly.com/question/29698347

#SPJ11

Using Euler's method with a step size of h = 1.5, the value of y(3) is approximately -13.025.

To approximate the value of y(3) using Euler's method with a step size of h = 1.5, we can iteratively compute the values of y at each step.

The given differential equation is:

2y + 16 = 5x

We are given the initial condition y(0) = 3.6, and we want to find the value of y at x = 3.

Using Euler's method, the update rule is:

y(i+1) = y(i) + h * f(x(i), y(i))

where h is the step size, x(i) is the current x-value, y(i) is the current y-value, and f(x(i), y(i)) is the value of the derivative at the current point.

Let's calculate the values iteratively:

Step 1:

x(0) = 0

y(0) = 3.6

f(x(0), y(0)) = (5x - 16) / 2 = (5 * 0 - 16) / 2 = -8

y(1) = y(0) + h * f(x(0), y(0)) = 3.6 + 1.5 * (-8) = 3.6 - 12 = -8.4

Step 2:

x(1) = 0 + 1.5 = 1.5

y(1) = -8.4

f(x(1), y(1)) = (5x - 16) / 2 = (5 * 1.5 - 16) / 2 = -6.2

y(2) = y(1) + h * f(x(1), y(1)) = -8.4 + 1.5 * (-6.25) = -8.4 - 9.375 = -17.775

Step 3:

x(2) = 1.5 + 1.5 = 3

y(2) = -17.775

f(x(2), y(2)) = (5x - 16) / 2 = (5 * 3 - 16) / 2 = 2.5

y(3) = y(2) + h * f(x(2), y(2)) = -17.775 + 1.5 * 2.5 = -17.775 + 3.75 = -13.025

Therefore, using Euler's method with a step size of h = 1.5, the value of y(3) is approximately -13.025.

To know more about Euler's method, visit:

https://brainly.com/question/30699690

#SPJ11

The area of the region is square units.. 19.855.

The equation of the rose is r=3cos(7θ). Here is its graph :The area of one leaf of the rose can be calculated as follows:This implies that the area of the region inside one leaf of the rose r=3cos(7θ) is 19.855 square units. 

To know more about area visit:

brainly.com/question/28393668

#SPJ11

To solve the given difference equation using the transform method, we can apply the Z-transform. Given the difference equation y(k+2) + y(k) = x(k), where x(k) is the discrete unit step function and y(k) = 0 for k < 0, we can take the Z-transform of both sides of the equation.

Applying the Z-transform to the given difference equation, we have:

Z{y(k+2)} + Z{y(k)} = Z{x(k)}

Using the time-shifting property of the Z-transform, we obtain:

z^2Y(z) - zy(0) - y(1) + Y(z) = X(z)

Substituting y(0) = 0 and y(1) = 0 (since y(k) = 0 for k < 0) and rearranging the equation, we get:

(Y(z)(z^2 + 1)) - (zY(z)) = X(z)

Now, we can solve for Y(z) by isolating it on one side of the equation:

Y(z) = X(z) / (z^2 + 1 - z)

Finally, to obtain the time-domain solution, we need to find the inverse Z-transform of Y(z). The inverse Z-transform can be computed using partial fraction decomposition and the table of Z-transform pairs. Once we obtain the inverse Z-transform, we will have the solution y(k) in the time domain.

Learn more about time-shifting property  here: brainly.com/question/33233898

#SPJ11

Measure of segment DC is 24

Measure of segment C'B' is 16

Measure of segment AD is 10

Measure of segment A'B' is 7

Measure of angle C is 49 degrees

Measure of angle A' is 111 degrees

Measure of angle D' is 65 degrees

Measure of angle B' is 135 degrees

Measure of angle A is 111 degrees

To determine the measures, we need to know the properties of parallelograms, we have;

We have that the two parallelograms are equal

Now, trace the angles from one to other

Angle A = 360 - (49 + 135 + 65)

add the values, we have;

Angle A = 360 -249

Angle A =111 degrees

Learn more about parallelograms at: https://brainly.com/question/10744696

#SPJ1

The derivative of the function f(x) = (3 ln(x))e^x can be calculated using the product rule. The derivative of the function f(x) = (3 ln(x))e^x is f'(x) = 3e^x (ln(x) + 1/x).

Using the product rule, we have the formula for the derivative: f'(x) = (3 ln(x))e^x * (d/dx)(e^x) + e^x * (d/dx)(3 ln(x)).

To find (d/dx)(e^x), we know that the derivative of e^x is simply e^x. Therefore, (d/dx)(e^x) = e^x.

To find (d/dx)(3 ln(x)), we apply the derivative of the natural logarithm. The derivative of ln(x) is 1/x. Therefore, (d/dx)(3 ln(x)) = 3 * (1/x).

Now, substituting these values back into the formula for the derivative, we have:

f'(x) = (3 ln(x))e^x * e^x + e^x * 3 * (1/x).

Simplifying further, we get:

f'(x) = 3e^x ln(x) * e^x + 3e^x/x.

Combining like terms, the final derivative formula is:

f'(x) = 3e^x (ln(x) + 1/x).

In summary, the derivative of the function f(x) = (3 ln(x))e^x is f'(x) = 3e^x (ln(x) + 1/x).

Learn more about deravative here:
brainly.com/question/25324584\

#SPJ11

The point on the curve y = 6 + 2e^x - 4x where the tangent line is parallel to the line 4x - y = 8 can be found by finding the x-coordinate at which the derivative of the curve matches the slope of the given line. The point on the curve where the tangent line is parallel to the line 4x - y = 8 is (ln(4), 6 + 2e^(ln(4)) - 4ln(4)).

To determine the point on the curve where the tangent line is parallel to the given line, we need to find the x-coordinate at which the derivative of the curve matches the slope of the line 4x - y = 8. First, let's find the derivative of the curve y = 6 + 2e^x - 4x. Taking the derivative with respect to x, we get dy/dx = 2e^x - 4. Next, let's find the slope of the line 4x - y = 8. We rearrange the equation to y = 4x - 8 and note that the slope of this line is 4. To find the point on the curve where the tangent line is parallel to the given line, we set the derivative equal to the slope of the line and solve for x:

2e^x - 4 = 4

Simplifying the equation, we have:

2e^x = 8

Dividing both sides by 2, we get:

e^x = 4

Taking the natural logarithm of both sides, we find:

x = ln(4)

Learn more about slope here:

https://brainly.com/question/3605446

#SPJ11

The cost at the production level 1850 is $11260. The average cost at the production level 1850 is $6.086. The marginal cost at the production level 1850 is $15.392.

a) To find the cost at the production level 1850, substitute x = 1850 into the cost function C(x). The cost at this production level is $11260.

b) The average cost is obtained by dividing the total cost by the production level. At x = 1850, the total cost is $11260 and the production level is 1850. Therefore, the average cost at this production level is $6.086.

c) The marginal cost represents the rate of change of the cost function with respect to the production level. To find the marginal cost at x = 1850, take the derivative of the cost function with respect to x and substitute x = 1850. The marginal cost at this production level is $15.392.

d) The production level that minimizes the average cost can be found by setting the derivative of the average cost function equal to zero and solving for x. The production level that minimizes the average cost is 12800 units.

e) To find the minimal average cost, substitute the production level 12800 into the average cost function. The minimal average cost is $5.532.

Learn more about average cost : brainly.com/question/29509552

#SPJ11