Every particle of matter in the universe attracts every other particle with a force that is directly proportional to the product of the masses of the particles and inversely proportional to the square of the distance between them. True or false?.

A measurement must have units to be meaningful.

Scientific measurements are generally based on the International System of Units. It is important to always include units when recording data, calculating, and reporting results. Units are globally recognized and necessary for the exchange of information among scientists around the world.

A conversion factor is a factor used to convert from one unit of measurement to another. Simple conversion factors can convert meters to centimeters, while more complex conversion factors can convert miles per hour to meters per second. The International System of Units commonly abbreviated as SI from the French Le Système International d'Unités is the modern metric system. SI was founded in 1960 by the 11th General Assembly of Weights and Measures.

Learn more about A measurement here:-https://brainly.com/question/21325893

#SPJ1

Answer:

115.88 m

Explanation:

The complete distance around the field (perimeter) is equal to the whole sum of the 4 sides:

Imagine you stroll trough the border of the field, you go 38.44m to the right, 19.5m up, 38.55m to the left, 19.5m down.

57.0 is the calculated value.

Any pair of non-zero digits separated by a zero is significant. The number 108.0097, for instance, includes seven significant digits. Every zero that is both to the right and left of a digit that is not zero and the decimal point has no significance. The number 0.00798, for instance, contained three significant digits. To calculate how many significant figures are in a number, use the three guidelines below: non-zero digits are always significant. Notable zeros fall inside the range of two significant digits. The importance of a final zero or subsequent zeros only applies to the decimal section.

Since there are only three significant figures in the operation, that would be the number to use: 8.00

Learn more about significant figures here-

https://brainly.com/question/14359464

#SPJ9

True

Capacitance is the ability of a component or circuit to collect and store energy in the form of an electrical charge.

Electric Charge is the property of subatomic particles that causes them to experience a force when put in an electric and magnetic field.  Electric charges are of two sorts: Positive and Negative, commonly carried by charge carriers protons and electrons.

Electric charge is a scalar quantity. Apart from having a magnitude and direction, a quantity to be named a vector ought to too comply the laws of vector addition, such as triangle law of vector addition and parallelogram law of vector addition; as it were at that point the amount is said to be a vector quantity. When two currents meet at a intersection, within the case of an electric current, the resultant current of these will be an algebraic sum and not the vector whole. Subsequently, an electric current may be a scalar quantity, in spite of the fact that it has magnitude and direction.

To learn more about electrical charge, visit;

https://brainly.com/question/9194793

#SPJ4

Answer: 16 meters; -4 meters

Explanation:

For this question, you can ignore the times that were given to you.

a.) Let's start with distance. Distance is a total sum, regardless of direction. This student walked 6 meters, stands still (0 meters), 3 meters, and 7 meters. Sum up these values: 6+0+3+7 = 16 meters

b.) Displacement adds direction. The student walks 6 meters away. We will give this the +x-direction. They then walk 3 meters back towards the origin (-x-direction) and pause for a second. They continue to walk 7 more meters toward the origin (-x-direction). This time when we sum these values we must include the signs: 6+(-3)+(-7) = -4 meters. We can test this by referring to the sentence where it says they passed their starting point. This means they are now in the -x-direction and we have a negative displacement.

Hope this helps!

Light travels at the exact speed of 299,792,458 meters (983,571,056 feet) per second in a vacuum.

The light passes through a 2.0-mm-thick section of window glass

= 1 × [tex]10^{-14}[/tex]    sec

Speed is defined as the rate at which an object's position changes in any direction. Speed is calculated as the ratio of distance traveled to time spent traveling. Speed is a scalar quantity because it has a direction but no magnitude. The SI unit of speed is milliseconds per second.

There are several types of speeds:

Speed is the street name for amphetamine sulphate, but it can also refer to other amphetamines. It's usually an off-white or pinkish powder that resembles crystals. It is also available in the form of a paste, which is usually white/grey or brown in color and can be damp and gritty.

Hence,

A thick piece of window glass = 2 mm

speed of light in medium = speed of light in vacuum / refractive index

      = (3×[tex]10^{8}[/tex])/1.5  

       = 2 ×[tex]10^{8}[/tex] m/s                                           

Time = distance / speed  

      = (2 × [tex]10^{-3}[/tex] )/(2 × [tex]10^{-11}[/tex])

      = 1 × [tex]10^{-14}[/tex]    sec

To learn more about speed ,visit;

https://brainly.com/question/13263542

#SPJ4

Answer:

Doesn't matter how fast it was going, all that matters now is that little ducky went splat and he is living no more

Explanation:

There is not enough information

There is no ground.

There is no ducky.

And it is not moving.

   The electrical charge of the metal sphere is ∈ = 2.78×10⁻⁷C  

   The value of the load or strength of the paint droplet is ∈ = 2×10⁻¹⁰ C

   Forces are the definition of Newton's second law, which is stated under the relation:

∑ Force = mass × acceleration.

  In other words, force is the origin of motion since it generates acceleration in a system.

Completamos el enunciado:

"An electrostatic paint sprayer has a 0.200-m-diameter metal sphere at a potential of 25.0 kV that repels paint droplets onto a grounded object. (a) What charge is on the sphere? (b) What charge must a 0.100-mg drop of paint have to arrive at the object with a speed of 10.0 m/s?"

We must determine the charge on the sphere initially.

a)  We determine the radius of the sphere:

r = 0.2m/2

∈ = rV/k

∈ = (0.1m)(25000V) / (9×10⁹Nm²/C²)

∈ = 2.78×10⁻⁷C

b)     If the mass of the paint drop is 0.1mg, and it moves with a velocity of 10m/s, we determine the kinetic energy.

Ke = mV²/2

Ke = 0.1×10⁻⁶kg (10m/s)² / 2

Ke = 5×10⁻⁶J = ΔE

∈ = ΔE/ ΔV

∈ =5×10⁻⁶J / 25000V

∈ = 2×10⁻¹⁰ C

Learn more about Forces in:

https://brainly.com/question/11539787

#SPJ4

For horizontally-launched projectiles, the acceleration is constant in both directions; option B.

Projectiles are objects which are launched into space and allowed to fall freely under the effect of gravity.

The motion of projectiles is known as projectile motion.

The path of a projectile motion is a parabola.

When an object or a ball is launched into the air, it moves with a constant downward acceleration.

The direction of acceleration due to gravitational force of the earth is constant in both directions.

Therefore, since the acceleration in the x-axis is zero and acceleration in the y-axis is -s -9.8 m/², the acceleration is constant in both directions.

Learn more about projectile motion at: https://brainly.com/question/24888457

#SPJ1

According to usual sign convention, thermal expansion creates a negative strain. TRUE

The propensity of matter to vary in volume in response to temperature changes is known as thermal expansion. A substance’s particles move more when it is heated, maintaining a greater average separation. Thermosets experience linear thermal expansion since they are employed in solid form.

The term “thermal expansion” refers to an object’s propensity to change its dimensions as a result of heat, including length, density, area, and volume. The substance’s kinetic energy increases when it is heated.

There are three forms of thermal expansion:

Linear growth.

Area enlargement

Volume increase

When an object’s temperature rises, it expands or grows in size, a process known as thermal expansion. Thermal expansion takes place

To know more about thermal expansion visit:

https://brainly.com/question/1992029

#SPJ4

With the help of the mathematical concept of Functions in physics, the number of days for population to reach 800 will be approximately 69 days.

Functions in physics is a mathematical concept used to represent different types of physical quantities in nature. Some types of functions are- linear, quadratic, cubic, exponential and reciprocal functions. A functions relates a set of inputs with another set of desired outputs. Functions are essential for formulating physical relationships in theoretical and practical sciences. For example, functions can be widely used in the representation of electric and magnetic fields in space and time, they are used in quantum mechanics, it is very widely used in determining the position and motion of an object in space. We perform a variety of mathematical operations on functions to make some conclusions and to answer some typical questions related to a physical system.

Here in this question, we have a function which represents a certain population of insect, the function is given by,

[tex]P(t)=200e^0^.^0^2^t[/tex]

where [tex]t[/tex] represents the number of days.

We have to find the total time in days for the population to reach 800 insects, that means,

[tex]P(t)=800[/tex]

Hence,

[tex]200e^0^.^0^2^t=800[/tex]

[tex]e^0^.^0^2^t=\frac{800}{400}[/tex]

[tex]e^0^.^0^2^t=4[/tex]

Taking natural log both sides

[tex]ln e^0^.^0^2^t=ln 4\\[/tex]

[tex]0.02t=ln4[/tex]

[tex]t=\frac{ln4}{0.02}[/tex]

[tex]t=69.3\\[/tex]

[tex]t=69[/tex] days (appproximately)

To know more about Functions in physics visit,

https://brainly.com/question/12195089

#SPJ4

The s sublevel can only hold two electrons because it has one orbital. The p sublevel has three orbitals and a maximum capacity of six electrons.

The d sublevel may hold a maximum of 10 electrons due to its five orbitals. Additionally, the 4 sublevel has 7 orbitals and a maximum of 14 electrons.

The third energy level has nine orbitals.

N is the number of orbits, while n2 is the number of orbitals (s).

How many orbitals can each set of quantum numbers identify at their greatest capacity?

As a result, the provided quantum number can only identify a maximum of one orbital, or 3pz.

To know more about Orbitals visit:

https://brainly.com/question/18914648

#SPJ4

We have looked at generational cohorts (e.g., gen x, millennials and gen z) in class. these are helpful to marketers, since all consumers within a generational cohort share the same lifestyle preferences

To know more about Operations Management  visit : https://brainly.com/question/16289727

#SPJ4

The boat will eventually stops and then speeds up in the reverse direction.

Because the object has an initial positive (northward) velocity and a negative (southward) acceleration; so, a graph of velocity versus time slopes down steadily from an original positive velocity. Eventually, the graph cuts through zero and goes through increasing-magnitude negative values.

Acceleration is the name we give to any process where the velocity changes. Since velocity is a speed and a direction, there are only two ways for you to accelerate: change your speed or change your direction—or change both.

Magnitude is defined as the maximum extent of size and the direction of an object. Magnitude is used as a common factor in vector and scalar quantities. By definition, we know that scalar quantities are those quantities that have magnitude only. Whereas vector quantities are those quantities that have both magnitude and direction.

To know more about "Acceleration"

Refer this link:

https://brainly.com/question/460763

#SPJ4

The rockets average acceleration during these first 5 minutes is 33.33 m/s².

The average acceleration of an object refers to the rate at which the velocity changes with time of motion of the object.

a = Δv/Δt

where;

The given parameters include;

v = 10 km/s = 10 km/s x 1000 m/1km = 10,000 m/s

t = 5 minutes = 5 x 60 s = 300 seconds

a = 10,000 / 300

a = 33.33 m/s²

Thus, the rockets average acceleration during these first 5 minutes is 33.33 m/s².

Learn more about average acceleration here: https://brainly.com/question/26246639

#SPJ1

In free fall, the fact that in the acceleration value (10 m/s^2) the unit of the second appears twice indicates that the object is moving at a rate of 10 meters per second every second.

The acceleration is the physical quantity that indicates the variation of velocity as a function of time,  and it is expressed in units of distance per time squared e.g.: m/sec2 ; km/h2

It is when the object or mobile falls from a height (h) with a positive acceleration equal to the gravity, describing a vertical rectilinear travel.

Learn more about free fall at: brainly.com/question/11257529

#SPJ4

A light-rail commuter train accelerates at a rate of 1.40 m/s2, it take 15.17s to reach its top speed of 76.5 km/h, starting from rest.

When describing the motion of the objects in terms of distance, time, and direction, physicists use the basic quantities of speed and velocity. Two terms and two distinct meanings. Yet, not uncommonly, we hear these terms used in interchangeably. So, what is the difference? Why is it incorrect to use terms speed and velocity interchangeably?

The reason is very simple. Speed is time rate at which an object is moving along a path, while velocity is the rate and direction of an object’s movement. Put another way, the speed is a scalar value, while velocity is a vector.

The mathematical calculation for speed is relatively straightforward, wherein the average speed of an object is calculated by dividing the distance traveled by the time it took the object to travel distance. Velocity, on the other hand, is more complicated mathematically and can be calculated in different ways, depending on what information is available about object’s motion. In its simplest form, average velocity is calculated by dividing change in position (Δr) by change in the time (Δt).

The formula to find the acceleration is:

[tex]a=\frac{v-u}{t}\\ t=\frac{v-u}{a}\\\\ =\frac{21.25-0}{1.40} \\\\ =15.17[/tex]

To know more about acceleration visit: brainly.com/question/12550364

#SPJ4

With the use of motion under the gravity formula, It will take 2.45 seconds for the ball to hit the ground.

Linear motion involves the movement of a body in a straight line. It can be horizontal motion or vertical motion which is also known as motion under gravity.

Given that a ball is dropped from the top of a tall building of height h = 29.47 m. To know how long it take the ball to hit the ground if acceleration due to gravity is to be 9.81m/s² and we neglect air resistance, we will make use of the formula below

h = ut + 1/2gt²

Since the ball is dropped from the top of a tall building, u = 0

29.47 = 1/2 × 9.81 × t²

29.47 = 4.905t²

t² = 29.47 / 4.905

t² = 6.008

t = √6.008

t = 2.45 s

Therefore, it take 2.45 seconds for the ball to hit the ground.

Learn more about Time Taken here: https://brainly.com/question/17146782

#SPJ1

The furanose form of the fructose is generated by formation of a hemiketal involving the attack of the hydroxyl group on carbon 5 with carbon 2.

Furanose can be drawn in the different structures such as Haworth structures and Fischer projections. But arrangement of atoms in the plane of the ring and Ch2Oh groups outside the plane of the ring can be clearly understood from Haworth structures. By looking at the Haworth furanose ring, one can observe that the −OH group on the second carbon is placed in two different ways on the plane of the ring. If hydroxyl group −OH is placed below the ring then it can be called as alpha form. If the −OH group is placed above ring, then it is named as beta furanose. These two forms are similar in all the respects except in stereo-geneticity. Furanose can form pyranose rings also by hemiketal formation of carbonyl of second carbon and hydroxyl of sixth carbon. This results in the formation of pyranose form of fructose. But predominant form of fructose among both is furanose rings. In both these form anomers are possible.

The furanose form of the fructose is generated by formation of a hemiketal involving the attack of the hydroxyl group on carbon 5 with carbon 2.

(This generates five-member furanose ring typical of fructose.)

To know more about fructose visit: brainly.com/question/28117000

#SPJ4

Answer:

gas thermometer is more sensitive

-4m/s^2 the velocity of a ball that rolled to the right 20 cm in 3 seconds

Vi = 20m/s

Vf = 0

t = (t2 - t1) = 8s -3s = 5s

Vf - Vi = a*5s

a = (0- 20m/s)/5s = -4m/s^2

Velocity is a measure of speed in motion or activity. A more concise word for celerity is speed. Physics uses the word "velocity" specifically to describe how quickly and in what direction an object's location changes. It is a vector quantity that expresses the speed and direction of a body's motion.

Velocity is the term for the rate at which a displacement changes. Acceleration is the measure of a change in velocity. Velocity is a vector quantity because it comprises both magnitude and direction. Acceleration is a vector quantity because it is the speed at which velocity varies.

learn more about Velocity refer

https://brainly.com/question/25749514

#SPJ9

Answer:

aowbe9 wieveiq diqbedi diwbe

Explanation:

01837192

Answer:

0.003 meters

Explanation:

[tex]d=3mm(\frac{1m}{1000mm} )=\frac{(3)(1)}{1000} =\frac{3}{1000} =0.003m[/tex]

Hope this helps

Answer:

3× 10^ {-3}m  

Explanation:

3mm=0.003m

0.003= 3× 10^ {-3}

By using the blackbody radiation formula, the temperature of the filament inside the bulb is changed by a factor of 10⁰'²⁵.

To tackle this issue, we need to understand black body radiation. A black body object's energy emission is inversely proportional to its area and the temperature to the fourth power. It may be established that

P = A . e . σ . T⁴

where P (power), A (surface area), e (emissivity), ( 5.67 x 10¯⁸ W/m²K⁴), and T (temperature) are all variables.

From the question above, we know that

P1 = 10 watt

P2 = 100 watt

T1 = T1

By using the black body radiation formula, the ratio of temperature is

T1⁴ / T2⁴ = P1 / P2

Hence,

T1⁴ / T2⁴ = P1 / P2

T1⁴ / T2⁴ = 10 / 100

T1⁴ / T2⁴ = 1 / 10

T2⁴ = 10T1⁴

T2 = ⁴√(10T1⁴)

T2 = T1 x 10⁰'²⁵

Thus, the temperature of the filament inside the bulb is changed by a factor of 10⁰'²⁵.

Learn more about filament:

https://brainly.com/question/24243186

#SPJ4

The mass of objects such as books, sandwiches, phones, pictures can be measured using a weighing balance scale.

The mass of an object is defined as the scalar quantity of that object that shows the amount of matter that makes up the object.

Mass is called a scalar quantity as it doesn't require the direction of an object but only it's magnitude to be measured.

it is measured in Kilograms or Kg using a weighing balance scale.

The volume of an object is the relationship that exists between its height, length and width. That is, L×W×H.

The volume of the ten rectangular shaped objects given above can be measured once the height, length and width of the objects are known.

The density of the objects is the relationship that exists between the mass and the volume of the object. That is,

Density= mass/volume.

Learn more about density here:

https://brainly.com/question/6838128

#SPJ1

The refractive index, n of glass is 1.53.

The critical angle of a refracting medium such as glass is the angle at  no refracted ray is obtained for light passing through the medium between the boundary or interface of the medium and a less dense medium, rather an emergent ray which is per perpendicular to the normal is obtained.

Beyond the critical angle, total internal reflection occurs.

The refractive index of a medium is the ration of the velocity of light in the less dense medium to that in a denser medium.

Given that the critical angle of a medium is C;

Refractive index, n of the medium = 1/ sin C

The critical angle from glass to air is 40.5°

The refractive index of glass = 1/sin 40.5°

Refractive index, n of glass = 1.53

Learn more about refractive index and critical angle at: https://brainly.com/question/11974403

#SPJ1

They are 1 meter apart.

The definition of force in physics is that it is a push or pull on a massed object that helps change its velocity.

An external force is a kind of agent that has the power to alter any type of resting or moving condition of a body. It has got its own direction and a magnitude.

One thing experiences a force from another. There are both living things and non-living objects in the concept of a force.

All objects, living and non-living, have the ability to exert a force on or against another item, as well as have their actions affected by forces.

The newton, abbreviated N, is the SI unit of force. The meter and unit are the foundation units that pertain to force.

To know more about Force, visit:

https://brainly.com/question/13191643

#SPJ4

According to potential energy, the energy released is 78.4 kJ.

We need to know about potential energy to solve this problem. The potential energy is the object's energy caused by its position. Potential energy can be determined as

PE = m . g . h

where PE is potential energy, m is mass, g is the gravitational acceleration (9.8 m/s²) and h is height.

From the question above, we know that

m = 80 kg

h = 100 m

By substituting the given parameters, we can calculate the height

PE = m . g . h

PE = 80 . 9.8 . 100

PE = 78400 joules

PE = 78.4 kJ

Hence, the energy released is 78.4 kJ.

Find more on potential energy at: https://brainly.com/question/1242059

#SPJ4

When Earth gets closer to a slow-moving outer planet and surpasses it in its orbit, that outer planet shows retrograde motion, similar to how a quicker runner goes past a slow runner in the outside lane.

The orbital movement of a spatial entity in the opposite direction of what is usual in a specific system is known as retrograde motion. The term "retrograde" is based on the Latin terms retro, which means "backward," and gradus, which means "step." As observed from Polaris, all main planets in the Solar System circle the Sun counterclockwise.

To learn more about the retrograde motion: brainly.com/question/22921263

#SPJ4

The number of significant figures in the product is 2.7537 x 10¹.

The term significant figures refers to the number of important single digits  in the coefficient of an expression in scientific notation.

(3.52 x 10^-11) x (7.823 x 10^11)

= (3.52 x 7.823) x (10⁻¹¹ ⁺ ¹¹)

= 27.53696 x 10⁰

= 27.53696

= 2.7537 x 10¹

Thus, the number of significant figures in the product is 2.7537 x 10¹.

Learn more about significant figures here: https://brainly.com/question/24491627

#SPJ1