Explain how to get it Thanks

The amount of energy absorbed by the 325g of water is 57,057J. Details about calorimetry can be found below.

The energy absorbed by a mass of substance can be calculated using the following formula;

Q = mc∆T

Where;

Q = 325g × 4.18 × (92 - 50)

Q = 57,057J

Therefore, the amount of energy absorbed by the 325g of water is 57,057J.

Learn more about energy at: https://brainly.com/question/3609481

#SPJ1

Answer:

An open system is :-

B. A system that allows energy and mass to move in and out of it.

Example :-

Water boiling in a pot on a stove. (Without lid).

Quartz and Feldspar will be comparatively larger in size since they are formed from cooling of magma while Pyroxene and Olivine are formed by the cooling of lava.

Magma is molten rock that is found deep within the earth's crust whereas Lava is molten rocks that comes up and flows on the earth's surface.

Minerals formed from magma and lava have comparatively different sizes.

Minerals formed from magma are larger in size than minerals formed from Lava. This is because minerals formed from magma undergo slower cooling, and thus, have a longer time to grow in size. However, minerals formed from lava have a relatively shorter cooling time and do not grow into very large sizes.

Therefore, Quartz and Feldspar will be comparatively larger in size since they are formed from cooling of magma while Pyroxene and Olivine are formed by the cooling of lava.

Learn more about magma and lava at: https://brainly.com/question/14886424

#SPJ1

Answer:

1. Used in many smoke detectors for homes and businesses to measure levels of toxic lead in dried paint sample to ensure uniform thickness in rolling processes like steel and paper production and to help determine where oil wells should be drilled.

2.Used to treat cancerous tumors to measure correct patient dosages of radioactive pharmaceutical to measure and control the liquid flow in oil pipelines to tell researchers whether oil wells are plugged by sand and to ensure the right fill level for packages of food, drugs, and other

products.

3.Used in medical diagnosis

4.Used to treat thyroid disorders. (Graves’s disease).

5.Used in molecular biology and genetics research.

6.Used in nuclear medicine for lung ventilation and blood flow studies.

7.Used in dental fixtures like crowns and dentures to provide a Uranium-234 natural color and brightness.

8.Used in electric blanket thermostats and to gauge the thickness of thin plastics, thin sheet metal, rubber, textile and paper.

Answer:

1.20 M (3 s.f.)

Explanation:

In this question, we are trying to find the concentration of KCl after dilution. Note that the number of moles of KCl does not change.

[tex]g \div \frac{g}{mol} = g \times \frac{mol}{g} = mol[/tex]

Number of moles of KCl

= 44.7 ÷74.55

= 0.59960 mol (5 s.f.)

New volume

= 500 mL

= (500 ÷1000) L

= 0.5 L

Concentration after dilution

= 0.59960 ÷0.5

= 1.1992 mol/L

= 1.20 M (3 s.f.)

* M is the symbol for Molarity, which is also equal to mol/L

What is one advantage of wind and hydroelectric power?

A. They are effective in any type of environment.

B. Neither harms wildlife.

C. Neither produces pollutants.

D. Both are inexpensive.

Explanation:

one of the qnswer is flood control, irrigation support, and clean drinking water

Answer:

Natural Selection

The answer is:

A. Natural Selection

Gloves is the tool component which will unlikely present a hazard in this scenario.

This is referred to as potential source of harm when performing various types of activities.

Gloves will unlikely cause harm as it is used to prevent the risk of electric shock when handling electrical devices which is why it is the most appropriate choice.

Read more about Hazard here https://brainly.com/question/7310653

#SPJ1

Answer:

4.8 g H₂O

Explanation:

To find the mass of water, you need to (1) convert grams B₂H₆ to moles B₂H₆ (via molar mass from periodic table), then (2) convert moles B₂H₆ to moles H₂O (via mole-to-mole ratio from reaction coefficients), and then (3) convert moles H₂O to grams H₂O (via molar mass from periodic table).

It is important to arrange the ratios/conversions in a way that allows for the cancellation of units (the desired unit should be in the numerator). The final answer should have 2 sig figs because the given value (3.7 grams) has 2 sig figs.

Molar Mass (B₂H₆): 2(10.811 g/mol) + 6(1.008 g/mol)

Molar Mass (B₂H₆): 27.67 g/mol

1 B₂H₆ + 3 O₂ ---> 2 HBO₂ + 2 H₂O
^                                             ^

Molar Mass (H₂O): 15.998 g/mol + 2(1.008 g/mol)

Molar Mass (H₂O): 18.014 g/mol

3.7 g B₂H₆          1 mole            2 moles H₂O           18.014 g
----------------  x  ---------------  x  -----------------------  x  -----------------  =  4.8 g H₂O
                          27.67 g           1 mole B₂H₆              1 mole

The movements of the substance across the dialysis membrane are as following: water: Moves in both directions.

Glucose: Moves into the blood.

Urea: Moves out of the blood.

Na, K, and Ca ions: Moves in both directions.

Dialysis is a process of filtration and purification of blood by a machine. This machine helped those people whose kidney stop working and doesn't purify the blood.

Thus, the correct options are: water: Moves in both directions.

Glucose: Moves into the blood.

Urea: Moves out of the blood.

Na, K, and Ca ions: Moves in both directions.

Learn more about dialysis

https://brainly.com/question/16026206

#SPJ1

Gas law refers to the relationship between the temperature, volume and pressure of a gas.

The term gas law refers to the relationship between the temperature, volume and pressure of a gas.

6a) PV =nRT

P = nRT/V

P =  0.898 * 0.082 * 293/24.5

P = 0.88 atm

6b)  Number of  moles of helium = 2.82 g/4 g/mol = 0.705 moles

Pressure =  991 mm Hg or 1.3 atm

V = nRT/P

V = 0.705 * 0.082 * 300/1.3

V = 13.3 L

8a) V = nRT/P

V = 0.814 * 0.082 * 273/1

V = 18.22 L

8b) 1 mole of oxygen occupies 22.4 L

1.21 mole of oxygen occupies   1.21 mole *  22.4 L/ 1 mole

= 27.1 l

9b) C4H10(g) + 13/2O2 -----> 4CO2 + 5H20

1 moles of butane produces 4 moles of CO2, It then follows that the volume of carbon dioxide produced is 4( 7.95 liters) = 31.8 litres

10b) CaCO3 ------> CO2 + CaO

Since the reaction is 1:1,  0.504 mol of CO2 is produced

PV =nRT

V = 0.504 * 0.082 * 273/1 atm

V = 11.3 L

Learn more about the ideal gas equation:https://brainly.com/question/79835

#SPJ1

Answer:

1 C₂H₆O

Explanation:

The given equation:

C₂H₆O + 3 O₂ ---> 2 CO₂ + 3 H₂O

Reactants: 2 carbon, 6 hydrogen, 7 oxygen

Products: 2 carbon, 6 hydrogen, 7 oxygen

As you can see, the amount of each element on both sides is identical. Therefore, the reaction is already balanced. This means that the coefficient in front of C₂H₆O is 1. When writing the equation, writing the one is insignificant and usually left out.

The ionization energy will increase substantially when 11th electron is removed compared to when the 10th electron is removed.

Ionization energy is the energy required to remove one or more electrons from a neutral atom in its gaseous state to form a positively-charged ion.

The ionization energy increases steadily as successive electrons are removed from an atom. A substantial increase in ionization energy occurs with the removal of an electron from a filled inner shell.

The 10th electrons is the last electron in the L shell of atoms. The 11th electron is the first electron in a  filled inner shell.

Therefore, ionization energy will increase substantially when 11th electron is removed compared to when the 10th electron is removed.

Note that there was no attached graph and the answer was given based on the general trend observed in ionization energies.

Learn more about ionization energy at: https://brainly.com/question/1445179

#SPJ1

Answer:

3 ZnS (s) + 2 AIP(s) ---> AI₂S₃(s) +  Zn₃P₂(s)

Explanation:

I believe you are asking for this reaction to be balanced. However, after looking more closely, those are not the products that would be created from the reactants. Assuming this is a double-displacement reaction, and taking the most common charges of the ions into consideration, the actual products would be AI₂S₃(s) + Zn₃P₂(s). I apologize if I assumed incorrectly.

For an equation to be balanced, there needs to be the same amount of each element on both sides of the equation.

The unbalanced equation:

ZnS (s) + AIP(s) ---> AI₂S₃(s) + Zn₃P₂(s)

Reactants: 1 zinc, 1 sulfur, 1 aluminum, 1 phosphorus

Products: 3 zinc, 3 sulfur, 2 aluminum, 2 phosphorus

As you can see, there is an unequal amount of each element on the reactants and products side. To balance the equation, coefficients in front of the compound(s) will be necessary.

The balanced equation:

3 ZnS (s) + 2 AIP(s) ---> AI₂S₃(s) +  Zn₃P₂(s)

Reactants: 3 zinc, 3 sulfur, 2 aluminum, 2 phosphorus

Products: 3 zinc, 3 sulfur, 2 aluminum, 2 phosphorus

Answer:

5.06 M LiCl

Explanation:

To find the new molarity of the solution, you need to (1) find the amount of moles LiCl (via the molarity equation using the original molarity and volume) and then (2) calculate the new molarity (via the molarity equation using the new volume and old moles). The final answer should have 3 sig figs to match the given values.

Molarity (M) = moles / volume (L)

Step (1)

381 mL / 1,000 = 0.381 L

Molarity = moles / volume

9.96 M = moles / 0.381 L

(9.96 M) x (0.381 L) = moles

3.79 = moles

Step (2)

750 mL / 1,000 = 0.750 L

Molarity = moles / volume

Molarity = 3.79 moles / 0.750 L

Molarity = 5.06 M

Answer:

Sickle cell anemia

Explanation:

is an inherited genetic abnormality of hemoglobin (the oxygen-carrying protein found in red blood cells) characterized by sickle (crescent)-shaped red blood cells and chronic anemia caused by excessive destruction of the abnormal red blood cells.

Answer:

Sickle cell

Explanation:

I just took the test and it was correct.

Answer:

B.

Explanation:

customization requires more material, more machine time which can creates a greater impact on the environment in the sense of pollution (travel by the extra employees, creation of custom materials, increased machine running time). Good luck in your studies. Hope this answers your question in full.

Answer:

a chemical compound

The percentage of the area under the normal distribution curve would lie above 98.02 on the x-axis is 2.5 % , option C is the answer.

Normal Distribution is a probability distribution which is symmetric about the mean , The frequency is more near the mean and less far from the mean.

It is given in the data that

10,000 more observations were collected

the percentage of the observations would be greater than 98.02 = ?

According to the 68-95-99.7 rule,

It states that approximately

68% of the observations lie within σ of µ

95% of the observations lie within 2σ of µ.

99.7% of the observations lie within 3σ of µ.

The percentage of the observation between various intervals is attached in the image in the answer.

2.1 percent of the population is distributed in the intervals between two and three standard deviations , which is the zone above 2SD and below 3SD.

As 2.1 % is approximate , Therefore from the given option , 2.5%

The percentage of the area under the normal distribution curve would lie above 98.02 on the x-axis is 2.5 % , option C is the answer.

To know more about Normal Distribution

https://brainly.com/question/15103234

#SPJ1

Answer:

c) oil and vinegar

Explanation:

A heterogeneous mixture is a mixture that does not have a "uniform composition" (meaning that the entire mixture is not thoroughly mixed to be the exact same. In different parts of the mixture, there is a              non-consistent / differing composition.)

Oil and vinegar, as you may know, do not thoroughly mix when put together--different parts of the mixture are made of different compositions. Some parts are made of oil, and some are a concentration of vinegar, but because they are not able to be mixed entirely, the mixture is considered a heterogeneous mixture. If you were to take different samples of different parts of the liquid, you would have a clear separation of oil and vinegar.

Milk is thoroughly milk--if you take out a tablespoon, it will be milk entirely--and it will have the same composition as all of the other milk in the bottle.

Air is complicated--and it can be described as either, but the question was likely intending the answer of oil and vinegar.

Vinegar and water do thoroughly mix. Vinegar absorbs water on a molecular level, so the mixture is thoroughly mixed when put together.

(Hope this helps!)

Answer: A. Simple structure, molecule, single bonds, two elements

Cr₂O₃ ( s ) + 3H₂S ( g ) → Cr₂S₃ ( s ) + 3H₂O ( l )

mol  Cr₂S₃ = 421 : 200.19 g/mol = 2.103

mol Cr₂O₃ ≈ mol Cr₂S₃ = 2.103 ( equivalent coefficient)

mass Cr₂O₃ = 2.103 x 151.99 g/mol = 319.63 gr

CH3 CH₂OH + 30₂ → 2CO₂ + 3H₂O

They are forms of water in its liquid state at ground level. Thus, the correct option is A.

Precipitation, or water in the atmosphere, forms hail. When water drops freeze together in the chilly higher parts of thunderstorm clouds, hail is the result.

When a water droplet is lifted by an updraft from a thunderstorm over the freezing point of the atmosphere, hail is created. The super-cooled water or water vapor that the frozen water droplet accretes later freezes when it comes into touch with it. A hailstone grows as a result of this process.

When water vapor from the atmosphere condenses into liquid water droplets, they become heavy enough to fall as a result of gravity.

For more information regarding hailstrom, visit:

https://brainly.com/question/26551945

#SPJ1

Answer:A

Explanation:

.

HAZMAT Class 6 Toxic and infectious substances.

Answer:

CLASS 2 Gases

Explanation:

Hope this helps

Answer:

the IUPAC name is: 2-ethyl-3-methyl-pentanal

Answer:

Thus IUPAC name is: 3-methylpentane. Was this answer helpful?

Explanation:

hope it will help you

The noble gas configurations for

Li= [He] 2s¹, Na=[Ne] 3s¹ and K =[Ar] 4s¹.

Noble gas configurations are the term for the electronic configurations of the atoms for which the electronic configuration becomes very larger i.e, for the higher atomic numbers.

For the noble gas electronic configurations, the noble gas, which is before that atom is written.

So, the Lithium can be represented as [He] 2s¹.

So, the Sodium can be represented as [Ne] 3s¹.

So, the Potassium can be represented as [Ar] 4s¹.

Hence, the noble gas configurations for Lithium= [He] 2s¹, Sodium=[Ne] 3s¹ and potassium =[Ar] 4s¹.

Learn more about electronic configurations here:

https://brainly.com/question/14267765

#SPJ10

Answer:

Substance

Explanation:

Any physical matter despite of living or non living things are composed by a set of molecules or atoms commonly known as substance

On specific living things are composed of biomolecules or cells where as non living things are composed of molecules and atoms

Answer:

Substances

Physical matters are divided into 3 states

As per randomness of particles the order is

Energy levels inside an atom are the specific energies that electrons can have when energy occupies specific orbitals. Electrons can be excited to higher energy levels by absorbing energy from the surroundings, an equivalent light is emitted when an electron returns from a high energy state to a lower one. Representation of this diagrammatic is known as the energy level diagram.