Explain in two ways that can be used to carry out the following processes during an Environmental risk assessment (ERA) a. Risk analyses and Evaluation. b. Hazard identification

Answers

Answer 1

The Environmental risk assessment include:

a. Risk analyses- To identify the need for action at a location, a risk assessor gathers and organises information from environmental samples of water, soil, and air. They also generate exposure and risk calculations and provide an analysis of potential health hazards.

b. Hazard Identification-  This entails visiting the workplace on a regular basis to inspect the operating conditions of all the equipment in use there as well as the personnel's work procedures. When inspecting, it's important to look for any potential hazards that can endanger the workers. In addition to inspection, one should talk to the managers and employees who are present at the workplace.  This would aid us in determining other threats that employees may sense but that we are unable to inspect.

Environmental Risk Assessment (ERA) examines how various environmental factors, such as the introduction of genetically modified plants, the usage of specific chemicals in food, feed, and plant protection products, or the introduction and spread of plant pests, may affect the ecosystem.

Numerous particular environmental problems can be detrimental to people's health and wellbeing. Chemical pollution, air pollution, climate change, pathogenic bacteria, lack of access to health care, inadequate infrastructure, and poor water quality are some of these problems.

To learn more on Environmental risk assessment, here:

https://brainly.com/question/15847624

#SPJ4


Related Questions

Weather Hazards: Heat Index and Wind Chill Q1: If Yuma, AZ has a temperature of 110° F and relative humidity of 10%, what is the apparent temperature (THI) in Yuma? If Yuma, AZ has a temperature of 110 degrees F and relative humidity of 10%, then the apparent temperature in Yuma is approximately 96 degrees F. If Mobile, AL has a temperature of 100° F and relative humidity of 50%, what is the apparent temperature? Air conditioners cool and dehumidify. How does this affect the actual heat index numerical value? Why don't the weather reports include the heat index during the winter months? If the temperature is 40°F and the wind is blowing at 10 mph, what is the WET? Will you be in danger of suffering frostbite? Why or why not?

Answers

If Mobile, AL has a temperature of 100 degrees F and relative humidity of 50%, then the apparent temperature in Mobile is approximately 112 degrees F.

Air conditioners cool and dehumidify, which can help lower the actual heat index numerical value, making it more comfortable in warm conditions. Weather reports do not include the heat index during the winter months since it is not applicable; temperatures are usually too low for a heat index to be calculated accurately.

If the temperature is 40 degrees F and the wind is blowing at 10 mph, the wind chill temperature (WET) is 36 degrees F. At this low temperature, frostbite can occur in a matter of minutes, even if you're moderately active outdoors. Therefore, it is important to limit exposure to cold temperatures by dressing warmly and avoiding prolonged outdoor activity when the wind chill is below freezing.

know more about relative humidity here

https://brainly.com/question/30415486#

#SPJ11

11. Why are so many of the extrasolar planets that have been
detected thus far in orbits so close to their stars?

Answers

Many of the extrasolar planets detected thus far are found in close orbits to their stars due to the limitations of current planet detection methods.

The most commonly used technique, the transit method, relies on detecting the slight decrease in starlight when a planet passes in front of its star. This method is more likely to detect planets with short orbital periods and close-in orbits.

Additionally, the radial velocity method, which measures the wobble of a star caused by an orbiting planet, is more sensitive to detecting massive planets in close orbits due to the stronger gravitational influence. As detection techniques improve and new missions are launched, a more diverse range of exoplanet populations, including those in wider orbits, will likely be discovered.

Learn more about extrasolar planets here:

https://brainly.com/question/3503373

#SPJ4

it is an assignment required in
350 words of subject indegenous science and stem

Answers

Indigenous Science and STEM relates to the knowledge passed down through generations by Indigenous peoples of the Americas. It is based on their experience and observations of their environment, and incorporates physical, biological and cultural elements.

Indigenous Science is founded upon the interconnections between humans and their natural environment, which is then used to form important theories and practices. It is inherently connected to STEM disciplines, such as mathematics, engineering, and sciences.

These disciplines are used to gain understanding of Indigenous Science's concepts and its implications on a broader scale. Indigenous Science and STEM are often studied together, as they each provide different perspectives and approaches to problem-solving that ultimately benefit all cultures.

know more about Indigenous here

https://brainly.com/question/8632762#

#SPJ11

Correct question is:

write an assignment required in 350 words of subject indegenous science and stem.

Research and share. Find a story in a national newspaper or magazine that addresses an issue associated with contemporary globalization. The article should be no more than 10 years old. Provide a proper reference for the article. Provide three examples from the article that illustrate the increasing interdependence of places and regions. Explain why you think this.

Answers

Globalization is the growing interdependence and unification of nations, financial systems, communities, and traditions throughout the globe.

What is globalization

The process encompasses multiple aspects and involves the global exchange of goods, services, information, technology, capital, and ideas.

The process of globalization has resulted in economic integration, characterized by the widespread participation of corporations in cross-border trade and investment, and the establishment of supply chains that traverse several nations. It has made it easier for commodities, amenities, and financial resources to circulate, strengthening economic interconnectedness among countries.

Learn more about globalization from

https://brainly.com/question/25499191

#SPJ4

a) Draw a sketch of the Rock Cycle which includes the majorrock types, and the key processes which result in their formation. Below your diagram, include a short definition of the major rock-forming processes in the cycle.
b) Name a specific place/geological environment (e.g. Hawaii Island chain, New Zealand North Island) where each major rock type described in your rock cycle diagram can be found.
c) For each answer to b) above, outline which specific rocks (e.g., tholeiitic basalts, arkose sandstones) and what geological structures are found in the place you named. Explain why these particular rocks and structures are found in that area, referring to the region’s tectonic setting.

Answers

a) Rock Cycle is the natural process by which rocks transform from one type to another type over time.

The key processes in the rock cycle are melting, weathering, erosion, compaction, cementation, metamorphism, and solidification. The different types of rocks that are formed by these processes are igneous, sedimentary, and metamorphic rocks.

The cycle begins when molten magma cools and solidifies to form igneous rocks. These rocks then undergo weathering and erosion to form sedimentary rocks.

These rocks undergo metamorphism and heat to form metamorphic rocks.

To know more about transform visit:

https://brainly.com/question/11709244

#SPJ11

vDescribe the associated emissions of CO, HC, NOx and particulates at the three levels (raw material, fuel processing, transport use).
2. Describe the needed energy demand for transport in terms of raw material (energy content of), fuel production (energy content) and mechanical work (energy content). Try to reflect on these numbers (how "big" are these number compared to other sectors)

Answers

The emissions associated with the three levels of transport use (raw material, fuel processing, and transport use) vary depending on the type of fuel used.

For example, when using fossil fuels such as gasoline or diesel, the emissions of CO, HC, NOx, and particulates are higher than when using renewable fuels such as biodiesel or ethanol. At the raw material level, the emissions are mainly from the extraction and refining of the fuel. At the fuel processing level, the emissions are mainly from the combustion of the fuel. Finally, at the transport use level, the emissions are mainly from the exhaust of the vehicle.

The energy demand for transport is significant, and is composed of three components: raw material, fuel production, and mechanical work. The energy content of raw materials is typically measured in British Thermal Units (BTUs). The energy content of fuel production is typically measured in megajoules (MJ).

The energy content of mechanical work is typically measured in kilowatt-hours (kWh). The energy demand for transport is significant compared to other sectors, as it is responsible for a large portion of global energy consumption.

know more about biodiesel here

https://brainly.com/question/27801107#

#SPJ11

Select all of the features present at an oceanic divergent plate boundary. HINT: You should select a total of 4 from below. Accretionary prism Trench Subduction of continental lithosphere Island arc Volcanoes on continents Subduction of oceanic lithosphere Rift Earthquakes Higher than surrounding areas Submarine volcanism

Answers

A divergent plate boundary is an area where two plates move away from each other. At this type of boundary, tectonic plates are separated by new material and various geological features are present, each exhibiting unique characteristics.

Accretionary prisms are formed by sediment that is pushed onto the edge of a tectonic plate, while trenches are formed by the sinking or subduction of an oceanic plate beneath another. Subduction of continental lithosphere occurs when a continental plate is overridden by an oceanic plate and forms volcanoes on continental landmasses.

Subduction of oceanic lithosphere occurs when two oceanic plates collide, forcing one under the other. A rift occurs when two plates tear apart, resulting in a linear depression on the surface of the earth. Earthquakes are common at divergent boundaries for obvious reasons. Submarine volcanism is the result of molten rock erupting from undersea volcanoes as a result of the two plates separating.

know more about geological features here

https://brainly.com/question/10208895#

#SPJ11

Atmospheric circulation is a process that creates the Earth's Hadley cells that yield prevailing wind patterns we experience. Name and briefly describe the two main factors that create these Hadley cells with these winds? Name these 3 MAIN prevailing winds and where they are located [from the North pole south to the equator]

Answers

The two main factors that create the Hadley cells and prevailing wind patterns are:

Differential heating

Coriolis effect

The three main prevailing winds and their locations

Polar Easterlies: These winds blow from the polar regions (North or South) towards lower latitudes. In the Northern Hemisphere, they blow from the Northeast to the Southwest. In the Southern Hemisphere, they blow from the Southeast to the Northwest.

Prevailing Westerlies: These winds blow from the subtropical high-pressure zones towards the mid-latitudes. In the Northern Hemisphere, they blow from the Southwest to the Northeast. In the Southern Hemisphere, they blow from the Northwest to the Southeast.

Trade Winds: These winds blow towards the equator from the subtropical high-pressure zones. In the Northern Hemisphere, they blow from the Northeast to the Southwest. In the Southern Hemisphere, they blow from the Southeast to the Northwest.

Learn more about Atmospheric circulation at

https://brainly.com/question/26055231

#SPJ4

Which of these proxy records can provide climate data from hundreds of thousands of years ago (or more)? [Select all that apply.] Coral records Tree rings Marine sediments Pollen Ice cores Question 7 0.5pts The Earth is closer to the sun in the Northern Hemisphere (NH) summer. True False

Answers

Proxy records can provide climate data from hundreds of thousands of years ago is The Earth is indeed closer to the sun in the Northern Hemisphere summer due to its Tilted Axes.

Correct option is B.

This is because the Northern Hemisphere tilts towards the sun in the summer when it rotates on its axis. This means that the sun's rays reach the Earth more directly and disperse more heat than normal, resulting in higher temperatures for the Northern Hemisphere summer.

This is opposed to the winter when the Earth tilts away from the sun, resulting in much colder temperatures and shorter days. This cycle of the Northern Hemisphere tilting towards and away from the sun is what results in the four seasons we experience during the year.

Correct option is B.

know more about Proxy records here

https://brainly.com/question/30931795#

#SPJ11

Correct question is:

Which of these proxy records can provide climate data from hundreds of thousands of years ago (or more)? [Select all that apply.]

a. Coral records Tree rings Marine sediments Pollen Ice cores

b. The Earth is closer to the sun in the Northern Hemisphere (NH) summer.

c. both

d. none

Air at the Earth's surface always flows faster than airflow aloft. moves from regions of high pressure to regions of low pressure. moves from regions of low density to regions of high density. moves from regions of low pressure to regions of high pressure. contains more moisture than air aloft.

Answers

At the Earth's surface, air always flows faster than airflow aloft because it is driven by differences in pressure. Air moves from regions of high pressure to regions of low pressure, and from regions of low density to regions of high density.

This is because air is less dense in regions of low pressure, and more dense in regions of high pressure. As air moves from high pressure to low pressure, it accelerates, creating wind. Additionally, air at the Earth's surface contains more moisture than air aloft. This is because air at the Earth's surface is closer to the ground, and is therefore more likely to come into contact with water sources such as oceans, lakes, and rivers.

This moisture is then carried aloft by the wind, creating clouds and precipitation. In summary, air at the Earth's surface always flows faster than airflow aloft because it is driven by differences in pressure, and contains more moisture than air aloft.

know more about low density here

https://brainly.com/question/9041034#

#SPJ11

During those three days did you eat mostly foods that are high or low on the food chain? More specifically, from what trophic level did most of your calories come from? From what trophic level did most of your protein come from?

Answers

A food's trophic level refers to its position in the food chain, or energy pyramid. The food chain starts with the lowest primary producer (plants) and consists of various levels such as herbivores (primary consumers), carnivores (secondary consumers), and so on.

The fact that most of our diet consists of foods higher up the food chain means that we eat more animal products such as meat, fish and dairy products. These foods come from higher nutritional levels and often require more energy and resources to be expended to produce them.

On the other hand, if a person's diet consists mostly of foods at the bottom of the food chain, it means eating more plant-based products such as fruits, vegetables, grains, and legumes. These foods are derived from lower trophic levels and are considered more environmentally sustainable and resource efficient.

The decision to consume foods with higher or lower nutrient levels depends on individual dietary preferences, cultural habits, health considerations, and environmental concerns.

To learn more about Food Chain:

https://brainly.com/question/7564953

#SPJ4

How can urban ecosystem be affected both by internal and
external factors?

Answers

Urban ecosystems can be affected by both internal and external factors, which can have significant impacts on their functioning and overall health.

Explanation of how each type of factor

Internal Factors:

Land use and urban design: The way land is used and urban areas are designed can impact the availability of green spaces, biodiversity, and habitat quality within the urban ecosystem. Poorly planned urbanization can lead to habitat fragmentation and loss of green areas.

Infrastructure and built environment: The construction of buildings, roads, and other infrastructure can alter the physical structure of the urban ecosystem. It can disrupt natural drainage patterns, affect water quality, and fragment habitats.

External Factors:

Climate change: Global climate change, including rising temperatures, changing precipitation patterns, and increased frequency of extreme weather events, can have profound effects on urban ecosystems. It can impact species distribution, alter plant phenology, and disrupt ecosystem functioning.

Regional air and water pollution: Pollution sources located outside urban areas, such as industrial facilities or agricultural activities, can contribute to air and water pollution in urban ecosystems. This pollution can impact air quality, water quality, and the health of urban plants and animals.

Learn more about ecosystem at

https://brainly.com/question/30187156

#SPJ4

Rock fragments found at the base of a slope - known as talus - likely accumulated as a result of which mass movement type? Creep Flows Slides Slumps Falls

Answers

Rock fragments found at the base of a slope, known as talus, are likely to have accumulated as a result of falls.

What are the falls

Falls refer to the mass movement type where rocks or rock fragments detach from a steep slope and fall freely or bounce down the slope. This can occur due to the influence of gravity, weathering, erosion, or other factors that destabilize the rocks on the slope. As the rocks fall, they accumulate at the base of the slope, forming a talus cone or debris pile.

It's important to note that other mass movement types such as slides, slumps, flows, and creep can also occur depending on various factors like slope angle, slope materials, water content, and other geological conditions. However, based on the description given, falls are the most likely mass movement type responsible for the accumulation of rock fragments at the base of a slope, forming talus.

Read mroe on Rock fragments here https://brainly.com/question/31113491

#SPJ4

4. Place the following stellar spectral classifications in
order, from highest temperature to lowest temperature. G,
K, A, B
6. Brown dwarfs are failed stars. (True or
false)

Answers

The correct order of stellar spectral classifications from highest temperature to lowest temperature is as follows: B, A, G, K

The spectral classification system, known as the Harvard spectral classification, arranges stars based on their surface temperature. In this system, stars are classified into different spectral types, denoted by letters. The sequence starts with the hottest and most massive stars (type O) and progresses to cooler and less massive stars (type M).

In this case, B is the highest temperature, followed by A, then G, and finally, K, which represents the coolest temperature among the given spectral classifications.

Learn more about Stellar here:

https://brainly.com/question/12790561

#SPJ4

Which of the following is a strategy to reduce stormwater runoff
volumes (keep more runoff on site)?
Detention/retention basins
Pervious pavements
Bioswales
All of the above

Answers

All of the above are effective strategies to reduce stormwater runoff volumes.

Detention/retention basins are areas that capture runoff and release it slowly over a period of time, allowing it to soak into the soil around it and reducing the amount released downstream. Pervious pavements are specially designed pavements that contain a large proportion of voids, allowing the water to soak through it and reducing runoff volumes.

Bioswales are shallow depressions that slowly convey runoff water to a wetland or other managed outlet and are typically planted with drought tolerant vegetation to absorb some of the runoff. Together, these strategies help to keep more runoff on site and reduce the amount of runoff that leaves the property.

know more about stormwater here

https://brainly.com/question/32045307#

#SPJ11

Which of the following statements is NOT a reason why meteorite impact craters are much more common on the Moon than on the Earth? Many impact craters on the Earth are buried by sediment over geologic time and so we don't see them. Many impact craters on the Earth are destroyed by plate tectonic processes. Smaller meteoroids and comets tend to burn up and disintegrate in the Earth's atmosphere before striking its surface. The Earth's crust is very strong and so it is difficult for meteorite impact craters to form there. The Earth's gravity is less than that of the moon's making impact much less likely.

Answers

The statement that is NOT a reason why meteorite impact craters are much more common on the Moon than on the Earth is: "The Earth's gravity is less than that of the moon's making impact much less likely".

Correct option is D.

While the gravity of the moon's is less than that of the Earth, this has nothing to do with why impact craters are not seen on the Earth. The main reason is because many impact craters on the Earth are either buried by sediment over geologic time or destroyed by plate tectonic processes.

Additionally, smaller meteoroids and comets tend to burn up and disintegrate in the Earth's atmosphere before actually reaching the surface. Consequently, the Earth's crust is relatively strong and prevents impact craters from forming. Thus, while gravity plays a role in the shape and form of the impact crater, it is not a factor in determining why impact craters are much more common on the Moon than on the Earth.

Correct option is D.

know more about meteorite here

https://brainly.com/question/1207919#

#SPJ11

When determining the location of the earthquake's epicenter with the data from 3 seismograms. Your plotted circles probably did not intersect at exactly the same spot. Can you think of any reasons why this is?

Answers

There are a few reasons why the plotted circles may not intersect at exactly the same spot. The accuracy of the seismometers can affect the data provided and the location of the epicenter.

If the data provided by one seismometer is slightly off due to a malfunction, it will affect the intersection of the circles. Additionally, depending on the type of wave used to measure the quake, the data can be skewed. For example, surface waves move slower than P and S waves and can make the epicenter appear to be further from the observation station than it actually is.

Additionally, any changes in the rock formations in the area from the seismic activity can cause a discrepancy in the data. Lastly, slight differences in the measurement of the exact time of arrival of the seismic waves can lead to an error in given locations. All these factors can contribute to the variance in the epicenter location.

know more about seismometers here

https://brainly.com/question/31035340#

#SPJ11

True or False: One of Aristotle's great virtues is that he
scrupulously records his sources for the observations he reports.
Explain why you chose that answer.

Answers

The given statement, One of Aristotle's great virtues is that he scrupulously records his sources for the observations he reports is False because Aristotle is known for his great contributions to philosophy, but he is not known for scrupulously recording his sources for the observations he reports.

Aristotle was a great thinker and philosopher, but he was not a historian. He was more concerned with developing his own theories and ideas than with documenting the sources of his observations. He was more interested in the philosophical implications of his observations than in the accuracy of the sources.

He was also more interested in the logical implications of his observations than in the accuracy of the sources. Aristotle was a great thinker, but he was not a historian. He was more concerned with developing his own theories and ideas than with documenting the sources of his observations.

know more about philosophy here

https://brainly.com/question/32416118#

#SPJ11

Wind currents develop within the atmosphere as a direct result of:

Select one:

a.
thermal energy being absorbed

b.
differential heating

c.
readiant heating

d.
thermal energy being released

Answers

Wind currents develop within the atmosphere as a direct result of b. differential heating

How do wind current develop ?

Wind currents develop within the atmosphere as a direct result of differential heating. The uneven heating of the Earth's surface leads to temperature variations, which in turn creates variations in air pressure. Warm air is less dense and rises, creating areas of low pressure, while cooler air sinks, creating areas of high pressure.

The movement of air from high-pressure areas to low-pressure areas creates wind currents. This differential heating can occur due to factors such as variations in solar radiation, land and water heating differently, and the Earth's rotation.

Find out more on wind currents at https://brainly.com/question/29517752


#SPJ1

. What are the major processes at work on the terrestrial planets’ surfaces? Which planet(s) appear to still be geologically active & how can you tell?
6. What is a magnetosphere? How do terrestrial & Jovian magnetic fields differ? What consequences could a planet suffer if it does not have a magnetic field (hint: look at Mars’ history)?
7. Compare & contrast Jupiter/Saturn vs. Uranus/Neptune in terms of size, general composition, cloud layers, ring systems, and number of satellites (i.e. what are the major trends?).
8. Which of the Jovian satellites might have liquid water oceans? Which of the Jovian satellites are volcanically active & what keeps them warm enough for this activity? Why are many of the smaller satellites (and in one case, a large one) considered "captured objects"?

Answers

The major processes at work on the terrestrial planets’ surfaces are volcanism, tectonic activity, erosion, and impact cratering. Earth and Mars appear to still be geologically active, as evidenced by the presence of volcanoes, tectonic activity, and erosion.

A magnetosphere is a region of space around a planet that is filled with a magnetic field. The terrestrial planets have relatively weak magnetic fields, while the Jovian planets have much stronger magnetic fields. If a planet does not have a magnetic field, it is more vulnerable to the effects of solar wind and cosmic radiation, which can strip away the atmosphere and cause other damage.

Jupiter and Saturn are much larger than Uranus and Neptune, and are composed mostly of hydrogen and helium. Jupiter and Saturn have multiple cloud layers and ring systems, while Uranus and Neptune have fewer cloud layers and no rings. Jupiter and Saturn have many more satellites than Uranus and Neptune.

Several of the Jovian satellites, such as Europa, Ganymede, and Enceladus, may have liquid water oceans beneath their icy surfaces. Io and Triton are volcanically active, and are kept warm enough for this activity by tidal heating.

know more about volcanism here

https://brainly.com/question/31045463#

#SPJ11

At 10.1 µm wavelength of maximum radiation emission, what are
the corresponding temperatures (in K)?

Answers

The wavelength of maximum radiation emission, known as the peak wavelength, is directly related to the temperature of an object according to Wien's displacement law.

Wien's law states that the product of the peak wavelength and the temperature is constant. Using this relationship, we can determine the corresponding temperatures for a given wavelength.

In the case of a wavelength of 10.1 µm (micrometers) or 10.1 x 10^-6 meters, we can apply Wien's displacement law. The constant in Wien's law is approximately 2.898 × 10^-3 m·K. Dividing this constant by the given wavelength (10.1 x 10^-6 meters) gives us the corresponding temperature.

Calculating the temperature:

Temperature = Constant / Wavelength

Temperature = 2.898 × 10^-3 m·K / 10.1 x 10^-6 meters

Temperature ≈ 28645.5 K

Therefore, at a wavelength of 10.1 µm, the corresponding temperature is approximately 28645.5 Kelvin (K).

Learn more about corresponding temperatures here

https://brainly.com/question/31385801

#SPJ4

A stream flow-rate (Q) is calculated as the multiplication-product of surface-area (A) and flow-velocity (V), i.e., Q = V * A; then, how is the stream's surface-area (A) calculated?
*denotes multiplication.
Question 9 options:
stream length * stream length
stream length * stream width
water depth * stream length
water depth * stream width

Answers

The correct answer is "water depth * stream width." To calculate the stream's surface area (A), you multiply the water depth (vertical measurement) by the stream width (horizontal measurement).

To calculate the surface area (A) of a river, both depth and width must be considered. Depth represents the vertical measurement from the water surface to the creek bed, and creek width represents the horizontal measurement of the creek width.

Multiplying the depth of the water by the width of the river gives the surface area of ​​the river. This calculation accounts for both vertical and horizontal water expansion and gives an accurate measure of the total area through which water flows. It is important to consider both factors to accurately determine the water surface. 

To learn more about stream flow:

https://brainly.com/question/21696299

#SPJ4

Describe how allometric growth in marginocephalia tricked
paleontologists into naming too many species. How is their
allometric growth consistent with the interpretation of
intraspecific competition?

Answers

The allometric growth in Marginocephalia led to the misidentification of multiple species by paleontologists.

How does allometric growth contribute to the misidentification of species?

Allometric growth refers to the differential growth rates of different body parts or structures within an organism. In Marginocephalia, a group of herbivorous dinosaurs that includes the well-known Triceratops, the frill and horns exhibit significant allometric growth.

Paleontologists initially interpreted these differences in size and shape as distinct species leading to an overestimation of species diversity. However, further research and analysis have revealed that these variations in frill and horn morphology are better explained by intraspecific competition.

Read more about marginocephalia

brainly.com/question/6598860

#SPJ4

a.
why is it important to protect biodiversity in urban areas?
b. Name three factors that affect biodiversity in urban
ecosystems

Answers

Biodiversity is an important part of urban ecosystems, as it provides a variety of benefits to the environment, people, and wildlife. Protecting biodiversity in urban areas is essential for maintaining a healthy and balanced ecosystem. There are three main factors that affect biodiversity in urban ecosystems: habitat destruction, pollution, and climate change.

Habitat destruction is one of the most significant threats to biodiversity in urban areas. As cities expand, natural habitats are destroyed, leaving fewer places for wildlife to live and reproduce. This can lead to a decrease in species diversity and a decrease in the number of species in an area.

Pollution is another factor that affects biodiversity in urban areas. Pollutants such as chemicals, heavy metals, and other toxins can enter the environment and cause harm to wildlife. This can lead to a decrease in species diversity and a decrease in the number of species in an area.

Climate change is also a major factor that affects biodiversity in urban areas. As temperatures rise, species may be unable to adapt to the changing environment, leading to a decrease in species diversity and a decrease in the number of species in an area.

know more about Biodiversity here

https://brainly.com/question/33175015#

#SPJ11

Latin American region enjoys monsoon climate A) False B) True

Answers

The given statement, Latin American region enjoys monsoon climate is False because The Latin American region does not enjoy monsoon climate.

Monsoon climate is characterized by seasonal reversal of winds, which bring heavy rains during certain times of the year. This type of climate is found in tropical and subtropical regions of the world, such as South and Southeast Asia, East Africa, and the Pacific Islands. Latin America, however, does not experience this type of climate.

Instead, the region has a variety of climates, ranging from tropical rainforest in the Amazon Basin to temperate climates in the Andes Mountains. The climate of Latin America is largely determined by its geography, with the Andes Mountains and the Caribbean Sea playing a major role in influencing the climate of the region.

The Caribbean Sea helps to moderate temperatures in the region, while the Andes Mountains create a barrier that blocks moisture from the Pacific Ocean, resulting in a drier climate in the western part of the region. Additionally, the region's location near the equator means that it experiences a tropical climate, with warm temperatures year-round.

know more about monsoon here

https://brainly.com/question/852921#

#SPJ11

Which country does the United States get most of imported oil from? Canada Saudi Araba Mexico Iraq Russia

Answers

The United States gets most of its imported oil from Canada. Canada is the largest single foreign source of oil for the United States, accounting for around forty percent of the total amount of imported oil.

Correct option is A.

This is an important trade relationship which has been heavily relied on since the 1970s. Due to the high production rate and the large reserves of oil, Canada has been able to take advantage of the US as their customer. Furthermore, the oil extracted from the tar sands in the Alberta region is of a particularly high quality, allowing for increased export opportunities.

Even though the US has partnerships with other countries such as Saudi Arabia, Mexico, Iraq, and Russia, the Canadian oil industry has been and is expected to remain, the biggest supplier of imported oil for the United States.

Correct option is A.

know more about customer here

https://brainly.com/question/31192428#

#SPJ11

What geologic formation is the most likely source of most of the boulders and large cobbles on the beaches near Seattle?

Answers

The most likely source of most of the boulders and large cobbles on the beaches near Seattle is the Columbia River Basalt Group.

This geologic formation is composed of a series of lava flows that were erupted from the Columbia River Plateau between 17 and 6 million years ago. The basalt flows are composed of dark, fine-grained basaltic rocks that are very resistant to weathering and erosion.

As the basalt flows cooled, they fractured into large blocks and boulders that were then transported by the Columbia River and its tributaries to the beaches near Seattle. The large cobbles and boulders on the beaches are the remnants of these ancient lava flows.

know more about Columbia River here

https://brainly.com/question/30840043#

#SPJ11

1) Senator A. B. Hilt has asked you to look back at historical records so that he can understand more about how climate change is affecting hurricane strength.
a. In September of 2019, Hurricane Dorian smashed records when it rapidly intensified just east of the Bahamas (islands east of Florida). Explain how warm SST anomalies can have an effect on tropical cyclones in a continually warming planet as a result of climate change.
b. What is the feedback loop associated with the principle from part a.? You may draw a picture and/or use some basic math to present the case.
c. Hypothesize what the future effects of the feedback loop would be under "worst case" climate change emissions scenarios, and what that could mean for future hurricane intensities. Please write a paragraph with at least 3 sentences.
c. Senator A.B. Hilt is going to be attending the next United Nations Climate Change Conference, and is curious what the effects of these feedback loops and "worst case" scenario will have on some of the poorer island nations in the South Pacific. Write a short paragraph with at least 3 sentences with your findings.

Answers

a. Warm SST anomalies can have a direct impact on tropical cyclones. SST is the sea surface temperature which is considered to be one of the key factors responsible for the formation of tropical cyclones.

When SST increases, it means that the ocean has more heat energy, which can provide more fuel to tropical cyclones. This results in the formation of stronger and more frequent tropical cyclones.

Continually warming the planet as a result of climate change leads to higher SST values, providing more energy to tropical cyclones, which can further intensify their strength. This is the main reason why tropical cyclones have become more frequent and stronger in recent years.
b. The feedback loop associated with the principle of increasing SST is a positive feedback loop.

To know more about anomalies visit:

https://brainly.com/question/30397891

#SPJ11

differential transmissivity of shortwave insolation and longwave terrestrial radiation by various atmospheric gases is better known as differential transmissivity of shortwave insolation and longwave terrestrial radiation by various atmospheric gases is better known as global dimming. global warming. cloud-albedo forcing. latent heat transfer. the greenhouse effect.

Answers

Answer: green house pls mark brayinliest  have a good night/day

Explanation: well Differential transmissivity of shortwave insolation and longwave terrestrial radiation by various atmospheric gases is better known as the green house

List three ways in which scientists can detect changes in
climate, particularly due to the accumulation of carbon dioxide, by
examining the geologic record.

Answers

Scientists can examine the geologic record to detect changes in climate due to the accumulation of carbon dioxide by looking at the composition of the atmosphere.

By analyzing the composition of the atmosphere, scientists can determine the amount of carbon dioxide present in the atmosphere and compare it to past levels. This can help them to determine if the amount of carbon dioxide has increased over time, which could indicate a change in climate.

Scientists can also examine the geologic record to detect changes in climate due to the accumulation of carbon dioxide by looking at the temperature of the Earth’s surface. By analyzing the temperature of the Earth’s surface, scientists can determine if the temperature has increased over time, which could indicate a change in climate.

Finally, scientists can examine the geologic record to detect changes in climate due to the accumulation of carbon dioxide by looking at the amount of ice present in the polar regions. By analyzing the amount of ice present in the polar regions, scientists can determine if the amount of ice has decreased over time, which could indicate a change in climate.

know more about geologic record here

https://brainly.com/question/11353751#

#SPJ11

Other Questions
Consider a transaction dataset that contains five items, {A, B, C, D, E}. Suppose the rules {A, B} C have the same confidence as {A, B} D, which one of the following statements are true or not, and why:1. The confidence of the {A, B} {C, D} is the same as the confidence of {A, B} {C}.2. All transactions that contain {A, B, C} also contain {A, B, D}. Which of the following is true regarding computer science?O Jobs in this field are limited.OIt only involves writing code.OIt involves more than just writing code.O Only a programmer can work in this field. Which three phrases describe the purpose of financial institutions Know how to find the charge on ions in an ionic compound. Example: What is the charge on the manganese ion in Mn2O3?(+3) 36.) Know how to find the conjugate acid and the conjugate base of a species. Example: What is the conjugate base of phosphoric acid, H3PO4 ? (H2PO4) 43.) Know how to write Lewis structures. Example: Draw the Lewis structure for ozone, O3. 44.) Know how to predict how many resonance forms a compound has. Example: How many resonance forms are there for the carbonate ion, CO32 ? (3) 45.) Know VSEPR theory (how to predict the shape of a molecule). Example: What is the shape of the SCl2 molecule?(bent) Complete a reaction table (in millimoles) for the net reaction resulting when 49.9 mL of 0.0890 M AgNO3 and 31.0 mL of 0.110 MK2CrO4 are mixed.Enter the net ionic reaction. (Use the lowest possible coefficients. Include states-of-matter under the given conditions in your answer.) (a) What mass of precipitate would form?g(b) What is the molar concentration of the remaining excess reactant? Assume that the volumes are additive.M Consider the following initial value problem: y+81y={9t,63,0t7t>7y(0)=0,y(0)=0 Using Y for the Laplace transform of y(t), i.e., Y=L{y(t)}, find the equation you get by taking the Laplace transform of the differential equation and solve for Y(s)= Score On Last Try: 0.5 Of 1 Pts. See Details For More. You Can Retry This Question BelowGiven The Function F(X)=X2e6x Determine The Open Interval(S) Where The Function Is Concave Up Determine The Open Interval(S) Where The Function Is Concave Down Determine Any Points Of Inflection. Question 4 Find The Inflection Point For The Function Shown Below. If There Problem #1: Using the fact that y 1(x)=e xis solution of the second order linear homogeneous DE (9+8x)y 8y (1+8x)y=0, find a second linearly independent solution y 2(x) using the method of reduction of order (Do NOT enter y 2(x) a part of your answer) and then find the unique solution of the above DE satisfying the initial conditions y(0)=22,y (0)=14 Enter your answer as a symbolic function of x, as in these not include ' y(x)= ' in your answer. Problem #1: examples Problem #2: Use the method of variation of parameters to find a particular solution to the following differential equation y +100y=csc10x, for 0Problem #2: Enter your answer as a symbolic function of x, as in these Do not include ' y= ' in your answer. examples 59 1 7 -3 -5 1 5 are an orthogonal basis for the column space of A. Then find an upper triangular matrix R such that A = QR. = 2. (30 points) Apply the Gram-Schmidt process to the columns of A to find a matrix Q, whose columns Please help asap!!!39-42 Rank the functions in order of how quickly they grow as \( x \rightarrow \infty \). 40. \( y=2^{x}, \quad y=3^{x}, \quad y=e^{x / 2}, \quad y=e^{x / 3} \) HELP ASAP I NEED HELP SOMEPLACE HELP MEON THIS QUESTION REVIEW the Bill of Rights -- the first ten amendments or changes to the U.S. Constitution, listed below the prompts. Then, RESPOND to the following three critical thinking prompts. Be sure to number and space your responses. 2. Consider the rights or liberties that are included in the Bill of Rights. Then, select one (1) that you feel could be removed and either a) not cause damage to the fabric of civic life and/or b) actually improve civic life in the USA. Explain your reasoning. You may not choose the 3rd Amendment, see note below. Note: Amendment 3, which states that "No Soldier shall, in time of peace be quartered in any house, without the consent of the Owner, nor in time of war, but in a manner to be prescribed by law," is arguably unnecessary in contemporary society. This is an obvious one; we are scientists, and look for a challenge. progressive muslims typically support all of the following for women, except . a. the rejection of islamic inheritance laws b. the increased occurrence of polygamy c. the increased role of women in government and society d. the rejection of gender separation and clothing requirements please select the best answer from the choices provided. a b c d mark this and return PLEASE HELPPPPPPPPPPPPPPPPPPPP If f(x) - f'(x)= 4x + 5 2x+6 > find: f'(2) - Question Help: Video Find the derivative of the function g(x) g'(x) = C = et 5-x Find the derivative of the function g(2) g'(x) = 5-2 Use the quotient rule to find the derivative of 9e +4 4x 5x7 Use e^x for e. You do not need to expand out your answer. Be careful with parentheses! - Question 8 If f(x) = 3-1 4+x find: f'(x) = Question Help: Video Submit Question 0/1 pt 399 Detail MatLab preferred zybookWrite code that creates variables of the following data types or data structures:An array of doubles.A uint8.A string (either a character vector or scalar string are acceptable).A 2D matrix of doubles.A variable containing data from an external file.For the last variable, you do not need to specify the contents of the file. Assume any file name you use is a valid file on your computer.View keyboard shortcutsEditViewInsertFormatToolsTableParagraph which adaptions woud be more advantogeous to a desert-dwelling organism than to a rain forest dwelling organism all the characteristics listed below are common behavior patterns found in all primates except * 2 points a. mother-infant bond b. affiliation and grooming c. father-son bond d. cooperation and conflict which statement regarding ph and enzyme function is false? reaction rates will decrease if the ph is above the optimum level. reaction rates always increase as the ph level rises. Mount BakerA Glacier PeakA Mount RainierMount AdamsMount St HelensMount HoodWASHINGTONMount JeffersonThree SistersNewberryOREGONCrater LakeMedicine LakeMount Shasta& Lassen PeakCALIFORNIA100 KmBased on the volcanic mountain range shown on the map, describe the motion of the plates and identifythe type of plate boundary in this region.