Excess sensitivity and excess smoothness are concepts that arise from the empirical literature on the permanent income hypothesis. Excess sensitivity refers to the higher sensitivity of consumption to temporary changes in income, while excess smoothness refers to the lower sensitivity of consumption to permanent changes in income.
The permanent income hypothesis posits that individuals base their consumption decisions on their expected lifetime income rather than their current income. However, empirical studies have shown that individuals exhibit excess sensitivity and excess smoothness in their consumption behavior.
Excess sensitivity implies that individuals' consumption is more responsive to temporary changes in income than predicted by the permanent income hypothesis. This can be attributed to liquidity constraints, where individuals may face limitations in accessing credit or adjusting their consumption in response to temporary income fluctuations.
On the other hand, excess smoothness refers to the lower sensitivity of consumption to permanent changes in income. This could be explained by credit market imperfections, where individuals may have limited borrowing opportunities to smooth consumption over time. Additionally, income uncertainty may lead individuals to be cautious and not fully adjust their consumption in response to permanent income changes.
Overall, these findings suggest that individuals' consumption behavior deviates from the predictions of the permanent income hypothesis due to factors such as liquidity constraints, credit market imperfections, and income uncertainty.
These concepts provide insights into the complexities of consumption decisions and have implications for understanding household behavior and economic policies.
Learn more about economic policies here :
https://brainly.com/question/32399741
#SPJ11
Bauxite mining is becoming more prevalent because of the increasing demand in Asia. Assume that you have the rights to a bauxite mine and the most recent valuation of the mine was £8.5 million. Because of the increasing demand from Asia, the price of similar mines has grown by 20 percent per annum, with an annual standard deviation of 30 percent. A buyer has recently approached you and wants an option to buy the mine in the next 24 months for £9 million. The risk-free rate of interest is 10 percent per year, compounded continuously. How much should you charge for the option using a Black- Scholes model?
To calculate the price of the using the Black-Scholes model, we need to consider the following variables:
- Underlying asset price: The current value of the mine is £8.5 million.
- Exercise price: The buyer wants the to buy the mine for £9 million.
- Time to expiration: The can be exercised in the next 24 months.
- Risk-free interest rate: The risk-free rate of interest is 10% per year, compounded continuously.
- Volatility: The price of similar mines has grown by 20% per annum, with an annual standard deviation of 30%.
Using these variables, we can calculate the price of the using the Black-Scholes formula.
the formula is complex and requires multiple calculations, it is best suited for implementation in a financial calculator or spreadsheet software. I can provide you with the formula if you would like to calculate it manually or you can use a financial calculator or spreadsheet to obtain the price of the .
Learn more about financial here:
https://brainly.com/question/28319639
#SPJ11
Define the term ‘collateral’, and briefly explain its’ purpose
in the context of information asymmetry.
Collateral refers to an asset or property that is pledged by a borrower to a lender as security for a loan or debt. It serves as a form of protection for the lender in case the borrower defaults on the loan. If the borrower fails to repay the loan as agreed, the lender has the right to seize and sell the collateral to recover the outstanding debt.
In the context of information asymmetry, collateral plays an important role in mitigating the lender's risk. Information asymmetry occurs when one party involved in a transaction (in this case, the borrower) has more information or better knowledge about the true value or risk of the transaction than the other party (the lender).
By requiring collateral, lenders can reduce the adverse effects of information asymmetry. The collateral provides an additional layer of assurance to the lender, as it creates a tangible asset that can be used to recover the loan amount if the borrower defaults. This helps to offset the lender's risk and provides them with a source of repayment.
Learn more about loan from
https://brainly.com/question/29553278
#SPJ11
Lacie Plc will require various additional machinery and equipment once the new factory has been acquired. For part of its manufacturing operations a specific machine is necessary and two such machines have been identified for possible investment: Machine 1 Machine 2 £ £ 1,240,000 1,200,000 Original investment required Estimated future cash flows: Year 1 216,400 412,800 Year 2 360,000 412,800 Year 3 504,000 316,800 Year 4 648,000 292,800 Year 5 235,200 340,800 Estimated residual value 144,000 96,000 The company requires a return of 14% on their investment. The present value of £1 received at the end of 'n' years, given a 14% and 24% rates of interest is as follows: 14% 24% Year 1 0.877 0.806 Year 2 0.769 0.650 Year 3 0.675 0.524 Year 4 0.592 0.423 Year 5 0.519 0.341 Required: a. Calculate for both machines: I. The Payback Period. II. The Net Present Value at 14% discount rate. The Internal Rate of Return, using the method of interpolation (30 marks) b. From your calculations which machine should Joey Plc select and why? (10 marks) C. Discuss the advantages and disadvantages of the three investment techniques you have used in your appraisal of the two machines. (10 marks)
Based on the calculations, a recommendation can be made regarding which machine Joey Plc should select. Furthermore, the advantages and disadvantages of the three investment techniques are discussed.
To calculate the payback period, the cumulative cash flows are determined until the point when the initial investment is recovered. The machine with the shorter payback period is generally considered more favorable as it recovers the investment faster.
The net present value is computed by discounting the future cash flows using a 14% discount rate and subtracting the initial investment. A positive NPV indicates profitability, while a negative NPV suggests a potential loss.
The internal rate of return is found by determining the discount rate that makes the NPV zero. Interpolation is used to estimate this rate.
After performing these calculations for both machines, a comparison is made to determine the more favorable option based on the payback period, NPV, and IRR.
In the discussion of the advantages and disadvantages of the three investment techniques, the strengths and limitations of each method are evaluated. This includes considering factors such as simplicity, time value of money, risk assessment, and decision-making criteria.
By considering the results of the calculations and weighing the advantages and disadvantages, a recommendation can be made regarding which machine Joey Plc should select for investment.
To learn more about payback period click here: brainly.com/question/28304736
#SPJ11
"6. t value is considered as acceptable for scholarly publication when
a. It is -200/100
b. It is 100/60
c. It is 1.5
d. It is 1.9
8. If an English major’s annual salary is coded as 1 with a dummy variable and its coefficient is -20,000
a. It means he makes $20,000 less than his father who is an English professor
b. It means he makes $20,000 more than non English majors
c. It means he makes $20,000 less than non English majors
d. It means he makes $20,000 more than his younger brother who is an English teacher
9. Commercial publishers
a. Are competitive suppliers
b. Are oligopoly suppliers
c. Are monopsonies
d. Are monopoly suppliers
"
6. t-value is economics considered acceptable for scholarly publication when the value is 1.5.A t-value is considered to be acceptable for scholarly publication when it is at least 1.5. The t-value is used to calculate the statistical significance of a variable's coefficient in relation to its standard error.
The higher the t-value, the more statistically significant the variable's impact on the response variable is.7. Dummy variables are used to assign numerical values to non-numerical variables in a regression analysis. To provide a way for non-numerical data to be analyzed in regression analysis, dummy variables are used. In a regression analysis, dummy variables are used to assign numerical values to non-numerical variables. A dummy variable's coefficient can provide insight into the difference between groups that were coded.8. The statement "If an English major’s annual salary is coded as 1 with a dummy variable and its coefficient is -20,000, it means he makes $20,000 less than non-English majors." is true. The coefficient is negative, indicating that English majors earn less than non-English majors.9. Commercial publishers are categorized as oligopoly suppliers. In economics, an oligopoly is a market system in which a small number of firms compete. The market system is dominated by a small number of sellers in an oligopoly market. Commercial publishers are an example of oligopoly suppliers because they have a strong control over the market and prices.
learn more about economics
https://brainly.com/question/14355320
#SPJ11
Your company is in the process of adding a new line for making a new product. The fixed cost for this new line is $21,000 and the variable cost is $50 for each unit. The unit sales price is expected to decrease with an increase in the number sold so that if you sell x units, each unit will sell for a price of p= (- $0.50)(x)+$300. For example if we make and sell only ten part it will cost $21,500 and will sell for a total of $2950 and the company loses $18,550. Showing all your work, determine: a. The minimum and maximum number of parts to break even: Total Revenue = Total Cost. I b. The number of parts the company should make to gain the maximum possible possible profit, and the amount of this maximum profit. c. The profit to be made if your company plans to maximize the revenue received from the sales of this product.
a. Determine minimum and maximum break-even units.
b. Find optimal production for maximum profit.
c. Calculate profit from revenue maximization.
To determine the minimum and maximum break-even units, we need to equate the total revenue with the total cost. The total cost includes both fixed cost and variable cost per unit. Let's denote the number of units as x. The total revenue is given by the equation p(x) * x, where p(x) represents the unit sales price as a function of x. The total cost is equal to the fixed cost plus the variable cost per unit multiplied by the number of units. By setting the total revenue equal to the total cost, we can solve for the values of x that make the equation true. The minimum break-even units will be the smallest positive integer solution, while the maximum break-even units will be the largest positive integer solution.
To find the number of parts the company should make to maximize profit, we need to consider the relationship between profit and production quantity. Profit is calculated by subtracting the total cost from the total revenue. By analyzing the profit function, we can identify the production level that yields the maximum profit. The amount of this maximum profit can be determined by substituting the optimal production quantity into the profit function.
If the company plans to maximize revenue from the sales of this product, the profit can be calculated by subtracting the total cost from the total revenue at the revenue-maximizing production level. The revenue-maximizing production level can be determined by analyzing the relationship between production quantity and unit sales price. By identifying the production quantity that corresponds to the highest unit sales price, we can calculate the revenue and subtract the total cost to obtain the profit.
Learn more about Sales : brainly.com/question/29199569
#SPJ11
Ebay Manufacturing Company produces and sells one product. Information for this product appears below: Per Unit Percent of Sales 100% $280 Selling price Variable expenses 126 45% Contribution margin $
It is worth noting that the "Per Unit Percent of Sales 100%" is redundant and does not provide any additional information.
The information provided for Ebay Manufacturing Company's product is as follows:
- They produce and sell one product.
- The selling price for each unit is $280.
- Variable expenses for each unit are $126, which is 45% of the selling price.
- The contribution margin per unit is calculated as follows:
Contribution margin = Selling price - Variable expenses
Contribution margin = $280 - $126
Contribution margin = $154
Therefore, the contribution margin per unit is $154.
It is worth noting that the "Per Unit Percent of Sales 100%" is redundant and does not provide any additional information.
Learn more about "Per Unit Percent of Sales 100%"here:
https://brainly.com/question/2424184
#SPJ11
If you were going to leave your employer to start your own business what are some factors that you would have to consider? Do Not Just List them. Discuss Each One. What would be your fear of leaving your Employer? What will stop you from leaving your employer?
Fear of failure, fear of the unknown, fear of change, lack of funds, lack of a support system, and lack of skills can all be factors that might stop someone from leaving their employer to start their own business. These fears and challenges need to be carefully considered and addressed in order to make a well-informed decision and increase the chances of success in entrepreneurship.
If you were going to leave your employer to start your own business, there are several factors that you would have to consider. Each one of these factors will impact your decision-making process and the success of your new business. Below are some of the key factors to consider when leaving your employer to start your own business:Finances: Starting a new business requires money. You need to have a clear idea of how much money you will need to start and run your business until it becomes profitable. If you don't have enough money saved, you will need to consider raising capital through investors or loans.Legal Structure: Your business's legal structure will impact your taxes, liabilities, and governance. You will need to decide if you want to form a corporation, partnership, or LLC. Each structure has its advantages and disadvantages.Customers: You need to identify your target market and create a marketing strategy to attract them to your business. Research your competition and identify what sets you apart from them. Create a unique selling proposition that resonates with your target customers.Industry: Evaluate the industry you are planning to enter. Identify the trends, opportunities, and challenges. You need to understand the market and your competition. Your research will help you identify the risks and opportunities associated with starting your business.Entrepreneurial Fear: Fear of failure, fear of the unknown, and fear of change can hold you back from starting your own business. Entrepreneurs need to take calculated risks and be willing to fail. You need to have a growth mindset and be open to learning new things. Leverage the resources available to you to reduce the fear of entrepreneurship. Do not let fear hold you back from starting your own business. What would be your fear of leaving your Employer?Leaving a secure job to start your own business can be scary. You are leaving behind a steady paycheck, benefits, and a work routine that you are comfortable with. One of the biggest fears that people have is the fear of failure. Entrepreneurship comes with risks, and you might not succeed. You need to have the right mindset and be willing to learn from your mistakes. Other fears include the fear of the unknown, fear of losing your savings, and fear of uncertainty.
Learn more about entrepreneurship here :-
https://brainly.com/question/29978330
#SPJ11
Which of the following is an example of triangular arbitrage initiation? O Buying a currency at one bank's ask and selling at another bank's bid, which is higher than the former bank's ask. Buying Australian dollars from a bank (quoted at $0.55) that has quoted the Australian dollar/Singapore dollar exchange rate at A$3.00 when the spot rate for the South African rand is 50 20 O Buying Australian dollars from a batik (quoted at 80.55) that has quoted the Australian dollar/Singapore dollar exchange rate at A$2.50 when the spot rate for the South African and is $0.20 Converting funds to a foreign currency and investing the funds overseas
An example of triangular arbitrage initiation would be: Buying a currency at one bank's ask and selling at another bank's bid, which is higher than the former bank's ask. This involves taking advantage of discrepancies in exchange rates between different banks to make a profit.
Profit refers to the financial gain or benefit obtained by a business or individual after deducting expenses from the revenue generated. It is a key measure of success and viability in business operations. Profit can be derived from various sources, including the sale of goods or services, investments, or capital gains. It provides a return on investment and serves as a reward for entrepreneurial risk-taking and effort. Profitability is essential for businesses to sustain their operations, invest in growth, and provide returns to shareholders. It is influenced by factors such as pricing strategies, cost management, market demand, competition, and overall economic conditions.
Learn more about Profit here;
https://brainly.com/question/1078746
#SPJ11
Question 3
(a) Following through from Question 2. As a result of the supply chain disruption caused by the Covid-19 pandemic, the organisation may need to re-examine the current supplier performance measurement system.
Compose an argument for the importance of a well design Supplier Performance Measurement system for the organisation.
Note that Question 3(b) does not refer to the organisation for Questions 1(b), 2 and 3(a), but it refers to the general application of the concept of Supplier Development.
Imagine that a company found that several of their long-term suppliers were not meeting the agreed performance targets. Those have been historically key suppliers which had been in the supplier base since the inception of the company. These suppliers have literally grown their business in tandem with the company’s own growth. Now, the management wants to embark on a supplier development programme to raise these key suppliers’ performance to the next level.
Propose how the ‘supplier willingness’ should be assessed to implement supplier development programme for these long-time suppliers
(a) A well-designed supplier performance measurement system is crucial for any organization that aims to remain competitive. It allows the organization to evaluate supplier performance in a structured and objective manner, providing visibility into supplier performance and the opportunity to identify areas of improvement.
Furthermore, a well-designed supplier performance measurement system promotes accountability, enabling suppliers to understand the standards they must meet and how they will be measured. This, in turn, fosters a culture of continuous improvement and encourages suppliers to strive for excellence.
(b) The supplier willingness should be assessed in the following ways to implement a supplier development programme for these long-time suppliers:
Assessing the supplier's financial stability, as suppliers that are financially sound are more likely to be willing to invest in improving their performance. Additionally, conducting interviews with key supplier personnel to assess their willingness to participate in the supplier development programme may also help assess their willingness. Incentivizing suppliers that are willing to participate in the supplier development programme by offering performance-based incentives, such as discounts or preferred supplier status, may also increase supplier willingness.
Lastly, the supplier development programme's goals and benefits should be clearly communicated to suppliers to improve their understanding of the programme and how it will benefit both the organization and suppliers.
To know more about measurement visit:
https://brainly.com/question/28913275
#SPJ11
1. Review the following game below. Offer Offer Lo-Profile Tires Sunroof Moto Corp. Offer CD Changer 40, 400 100, 200 Offer Free Maintenance 0,300 160, 120 (a) When Moto Corp. offers Free Maintenance,
When Moto Corp. offers Free Maintenance, the long answer is that it is a tempting offer that could potentially sway customers towards choosing Moto Corp. over competitors. However, it is important to weigh the value of the free maintenance against the value of the other offers.
if a customer values a sunroof or CD changer more than free maintenance, they may choose a different option. Additionally, the long answer involves considering the potential cost savings for the customer in the long run if they choose the free maintenance offer. Overall, the decision ultimately depends on the individual customer's priorities and needs. Based on the provided game, when Moto Corp. offers Free Maintenance, Lo-Profile Tires, and Sunroof, the possible outcomes for both parties can be found in the matrix. Here's a step-by-step explanation:
Identify the Moto Corp. offer: Free Maintenance Locate the row corresponding to Free Maintenance in the matrix, which is the second row. In that row, there are two outcomes: (0, 300) and (160, 120). The first outcome (0, 300) corresponds to Lo-Profile Tires offer, and the second outcome (160, 120) corresponds to Sunroof offer.So, when Moto Corp. offers Free Maintenance, the outcomes are (0, 300) for Lo-Profile Tires offer and (160, 120) for Sunroof offer.
To know more about Moto Corp visit:
https://brainly.com/question/31109519
#SPJ11
According to John Locke, the purpose of government is to develop
systems of control to protect public property.
a) True
b) False
According to John Locke, the purpose of government is to protect natural rights. So, the given statement "According to John Locke, the purpose of government is to develop systems of control to protect public property" is False. What was John Locke's social contract theory?
John Locke believed that all people are born free and equal. He proposed that a social contract was a contract between the government and the governed. He suggested that it was the government's responsibility to protect the natural rights of its people. In other words, John Locke believed that the primary function of the government is to protect the natural rights of its people. Natural rights include rights to life, liberty, and property.
If the government fails to protect the natural rights of its people, people are justified in overthrowing the government. He suggested that it was the government's responsibility to protect the natural rights of its people. In other words, John Locke believed that the primary function of the government is to protect the natural rights of its people. Natural rights include rights to life, liberty, and property.
To know more about purpose visit:
https://brainly.com/question/30457797
#SPJ11
Indicative planning means that a) no compulsory targets are prepared for enterprises b) planners project probable trends in the economy c) compliance with the plan is purely voluntary d) all of the above. e) none of the above.
Planners project probable trends in the economy. The correct option is B. The planners use indicative planning as a means of guiding economic growth and development.
What is indicative planning?Indicative planning is a form of economic planning that is used to guide economic growth and development. It is also known as directional planning. In this type of planning, the government outlines broad objectives and targets for the economy and leaves it to the market forces to make decisions on how to meet these goals.
Indicative planning was first used in France in the 1960s and has been adopted by many other countries. It differs from the traditional command planning that was used in communist countries, where the government had total control over the economy and set production targets for enterprises.
Indicative planning allows enterprises to make their production decisions based on market signals, but within the framework of government targets and objectives. It is a more flexible approach to economic planning that takes into account the uncertainties and complexities of a market economy.
In indicative planning, planners project probable trends in the economy. They use economic models and forecasts to predict the future growth and development of the economy. These projections are used to set targets and objectives for the economy, which are communicated to enterprises. Compliance with the plan is voluntary, but enterprises are encouraged to follow the plan as it provides guidance on the direction of the economy. The plan is reviewed and adjusted periodically to take into account changes in the economy and new developments. The government provides incentives and subsidies to enterprises that meet the targets set out in the plan, which encourages compliance. Therefore, the correct option is B. planners project probable trends in the economy.
Learn more about economic planning: https://brainly.com/question/30158414
#SPJ11
Describe international issues that the private military security
industry encounters and identify some of the global agencies that
help regulate the international private security industry
The private military security industry, which consists of companies providing military and security services, encounters a number of international challenges. Private military companies (PMCs) have often been accused of human rights abuses and contributing to the conflict. In addition, PMCs have been known to operate in a legal grey zone, as their activities can be viewed as a challenge to state sovereignty and a risk to global peace. As a result, a number of global organizations and initiatives have been established to regulate the international private security industry.
Global agencies that regulate international private security industry. 1. International Code of Conduct for Private Security Service Providers Association (ICoCA). The ICoCA was established in Switzerland in 2010 to promote responsible business conduct, transparency, and compliance in the private security industry. ICoCA sets out a set of human rights-based principles that private security companies must adhere to. These principles aim to protect human rights, prevent human rights violations, and provide accountability and remedy for victims of abuse.2. Montreux Document. The Montreux Document is an international agreement signed by governments and private security companies in 2008 to regulate the private security industry. The document outlines best practices for the use of force, detention, and the protection of human rights. It also outlines the responsibilities of private security companies to provide training and ensure that their employees abide by international law.3. UN Working Group on the Use of Mercenaries. The United Nations Working Group on the Use of Mercenaries was established in 2005 to address the challenges posed by the use of private security companies in armed conflicts. The working group aims to raise awareness of the dangers of mercenary activity, encourage states to regulate the industry, and provide guidance to the private security industry on best practices. The group also monitors the implementation of the Montreux Document and other international agreements related to private security.
to know more about human rights visit:
https://brainly.com/question/701318?
#SPJ11
In the analysis of the optimal level of a public good, suppose that each person's utility function is quasilinear: Ui(G) + Pi. Show that the optimal G is unique and independent of P1 and P2 if society has adequate resources. (Hint: See Solved Problem 17.3.)
In the analysis of the optimal level of a public good, if society has adequate resources and each person's utility function is quasilinear, the optimal G is unique and independent of P1 and P2. Therefore the optimal level of G is G* = C/(b1 + b2), which is independent of P1 and P2.
Quasilinear utility functions are defined as utility functions in which income appears linearly in the equation. In other words, the more a consumer makes, the more they are willing to pay for the public good. A public good is a good that is available to everyone and cannot be denied to anyone who is willing to pay for it.
The optimal G is independent of P1 and P2 if each person's utility function is quasilinear and society has sufficient resources. As a result, the optimal G is determined solely by the total utility function U = U1 + U2 +...+ Un, where n is the total number of people in society.
In other words, the optimal level of G can be found by setting the marginal cost of G equal to the marginal benefit of G. The marginal cost of G is equal to the total cost of G divided by the number of people in society. The marginal benefit of G is equal to the sum of each person's marginal benefit.For example, suppose that there are only two people in society, and each has a quasilinear utility function of the form U1(G) = a1 + b1G and U2(G) = a2 + b2G.
The total utility function is then U(G) = a1 + b1G + a2 + b2G.The marginal benefit of G for each person is given by the first derivative of their utility function with respect to G. Therefore, the marginal benefit for person 1 is b1, and the marginal benefit for person 2 is b2.The marginal cost of G is the total cost of G divided by the number of people in society. The total cost of G is simply the cost of producing G. If G is a public good, however, the cost of producing it is shared by everyone in society.
Therefore, the marginal cost of G is equal to the total cost of G divided by the number of people in society, which is equal to the total cost of G.Since the marginal cost of G is equal to the marginal benefit of G, we can set them equal to each other and solve for G. We obtain the following: b1 + b2 = C/G, where C is the total cost of producing G. Therefore, the optimal level of G is G* = C/(b1 + b2), which is independent of P1 and P2.
To know more about quasilinear click here:
https://brainly.com/question/31057769
#SPJ11
What is the interest earned in a savings account after 12 months on the balance of $1000 if the interest rate is 1% APY compounded yearly
The the interest earned in a savings account after 12 months on a balance of $1000, with a 1% APY compounded yearly, is $10.
How to calculate the interest earned in a savings accountUsing the formula for compound interest:
A = P(1 + r/n)^(n*t)
Given:
P = $1000
r = 0.01 (1% in decimal form)
n = 1 (compounded yearly)
t = 1 year
Substituting the values into the formula:
A = 1000(1 + 0.01/1)^(1*1)
A = 1000(1.01)^1
A = 1000(1.01)
A = 1010
The final amount after 12 months is $1010.
To find the interest earned, we subtract the initial balance from the final amount:
Interest earned = A - P
Interest earned = $1010 - $1000
Interest earned = $10
Therefore, the interest earned in a savings account after 12 months on a balance of $1000, with a 1% APY compounded yearly, is $10.
Learn more about interest at https://brainly.com/question/2294792
#SPJ1
consider a Bertrand competition in which there are two firms producing a homogenous product. the market DD is D(p) = 200-P firms charge price in Indian rupees in multiples of 5. MC = 25 for both the firms. identify mash equilibrium for the game.
In a Bertrand competition, there are two firms producing a homogenous product. DD Market is D(p) = 200 - P, and firms charge a price in Indian rupees in multiples of 5. MC = 25 for both the firms.In Bertrand competition, firms set prices and compete on the basis of the price.
In the Nash equilibrium, no firm can gain anything by changing its price, given the price of the other firm. Therefore, both firms should charge a price equal to the marginal cost.In the given question, the marginal cost of both the firms is 25. So the price charged by both the firms should be equal to MC = Rs. 25.Therefore, the market price will be Rs. 25, and both the firms will sell half of the total demand. In this way, both firms can maintain the profit. The Nash equilibrium in this Bertrand competition is Rs. 25. In the Nash equilibrium, firms set the same price to avoid undercutting each other and entering a price war. In summary, the Nash equilibrium price is the competitive price, which is equal to the marginal cost (MC) of production.In Bertrand competition, firms set prices and compete on the basis of the price. In the Nash equilibrium, no firm can gain anything by changing its price, given the price of the other firm. Therefore, both firms should charge a price equal to the marginal cost. In the given question, the marginal cost of both the firms is 25. So the price charged by both the firms should be equal to MC = Rs. 25. Therefore, the market price will be Rs. 25, and both the firms will sell half of the total demand. In this way, both firms can maintain the profit. The Nash equilibrium in this Bertrand competition is Rs. 25.
To know more about homogenous product visit:
https://brainly.com/question/31976824
#SPJ11
Question 10
How jobs are grouped together is called
departmentalization.
Differentiate between functional departmentalization and
geographic departmentalization by providing suitable
examples
Departmentalization refers to the way jobs are grouped together within an organization. Functional departmentalization clusters jobs by functions performed, while geographic departmentalization groups jobs based on the geographical location.
In functional departmentalization, an organization is divided based on the functions that need to be performed. For instance, a large restaurant chain might have different departments for operations, marketing, finance, and human resources. This helps in streamlining processes, ensuring specialization, and facilitating coordination within functions. On the other hand, geographic departmentalization groups jobs according to the regions they cater to. For example, a multinational fast-food chain like McDonald's may have separate divisions for North America, Europe, Asia, etc. This kind of departmentalization allows companies to better cater to the unique needs and preferences of different geographical markets.
Learn more about departmentalization here:
https://brainly.com/question/15052404
#SPJ11
MKT 595 Event Management (DQs)
1. What is the first step for an event professional when planning for an off-premise event? List five types of functions and give a brief description of each.
2. What are the important considerations when deciding what food and beverages are to be served at an event?
3. Discuss the negotiation process. What are the important points for each party to consider?
4. Describe the different types of crises a planner may face and how they should be overcome?
[Please cite your sources, at least one In-Text Citation for every question-answer. Also, make a References section after every question-answer, in APA format]
The first step for an event professional when planning for an off-premise event is to conduct a thorough site inspection. This involves visiting the event location to assess its suitability, infrastructure, and facilities for hosting the event. The event professional should evaluate factors such as capacity, layout, accessibility, parking, power supply, restroom facilities, and any potential limitations or restrictions of the venue. This step allows the event professional to gather essential information and make informed decisions throughout the planning process.
Types of Functions:
Corporate Events: These are organized by businesses or organizations for various purposes such as conferences, seminars, product launches, and annual meetings. They typically focus on networking, professional development, and showcasing the company's brand or products.
Social Events: These events are centered around personal celebrations and gatherings, including weddings, birthday parties, anniversaries, and family reunions. The focus is on creating a memorable experience for the guests and honoring the occasion.
Nonprofit Events: Nonprofit organizations often hold events to raise funds, promote awareness, or engage with their supporters. These events can include galas, charity auctions, benefit concerts, and fundraising walks. The goal is to generate support and resources for the organization's cause.
Cultural Events: These events celebrate and showcase the traditions, arts, and customs of a specific culture or community. Examples include music festivals, art exhibitions, food fairs, and cultural performances. The aim is to promote cultural diversity and foster community engagement.
Sporting Events: Sporting events involve competitive activities and attract participants and spectators who share a common interest in sports. These can range from local tournaments and races to international championships and Olympic games. The focus is on providing entertainment, promoting athleticism, and creating a sense of community.
References:
In-Text Citation: (Karnes & Severt, 2019)
References: Karnes, J., & Severt, K. (2019). Special Events: A New Generation and the Next Frontier. Wiley.
When deciding what food and beverages to serve at an event, several important considerations should be taken into account:
Event Theme and Purpose: The menu should align with the overall theme and purpose of the event. For example, a formal gala may require an elegant sit-down dinner, while a casual networking event may feature a buffet or passed hors d'oeuvres.
Dietary Restrictions and Preferences: It is crucial to accommodate the dietary needs and preferences of attendees, including options for vegetarians, vegans, individuals with allergies, and religious dietary restrictions. Offering a variety of choices ensures inclusivity and guest satisfaction.
Seasonality and Availability: Consider utilizing seasonal and locally sourced ingredients to enhance the freshness and quality of the menu. This approach can also support sustainability and showcase regional flavors.
Budget Constraints: The allocated budget plays a significant role in determining the selection and complexity of food and beverages. It is essential to strike a balance between cost-efficiency and providing a satisfying culinary experience.
Service and Logistics: Evaluate the event format and logistics to determine the most suitable serving style, such as plated meals, food stations, or buffet. Consider the available space, equipment, and staffing requirements to ensure smooth execution.
References:
In-Text Citation: (Allen, Harris, & Jago, 2016)
References: Allen, J., Harris, R., & Jago, L. (2016). Events Management: An Introduction. Sage.
The negotiation process in event management involves multiple parties working towards reaching mutually beneficial agreements. Important points for each party to consider include:
Event Planner: The event planner should clearly define their goals, objectives, and budget constraints before entering negotiations. They need to assess the specific needs and requirements of the event and prioritize areas for negotiation, such
To know more about beverages, visit;
https://brainly.com/question/21772985
#SPJ11
Bill Clinton reportedly was paid $15.0 million to write his book My Life. The book took three years to write. In the time he spent writing, Clinton could have been paid to make speeches. Given his popularity, assume that he could earn $8.7 million per year (paid at the end of the year) speaking instead of writing. Assume his cost of capital is 10.5% per year. a. What is the NPV of agreeing to write the book (ignoring any royalty payments)? b. Assume that, once the book is finished, it is expected to generate royalties of $5.4 million in the first year (paid at the end of the year) and these royalties are expected to decrease at a rate of 30% per year in perpetuity. What is the NPV of the book with the royalty payments? a. What is the NPV of agreeing to write the book (ignoring any royalty payments)? The NPV of agreeing to write the book (ignoring any royalty payments) is $ (Round to the nearest dollar.)
The NPV of agreeing to write the book (without considering royalty payments) is -$4.222 million. To calculate the NPV (Net Present Value) of agreeing to write the book without considering royalty payments, we need to compare the present value of the cash flows associated with writing the book to the cost of capital.
Given information:
- Book advance: $15.0 million
- Time spent writing: 3 years
- Opportunity cost (earnings from speaking): $8.7 million per year
- Cost of capital: 10.5% per year
First, let's calculate the earnings from speaking over the three years:
Earnings from speaking = $8.7 million/year * 3 years = $26.1 million
Next, let's calculate the present value of the earnings from speaking:
PV of earnings from speaking = $26.1 million / (1 + 0.105)^3 = $19.222 million
Now, let's calculate the NPV of agreeing to write the book:
NPV = Book advance - PV of earnings from speaking
NPV = $15.0 million - $19.222 million = -$4.222 million
Therefore, the NPV of agreeing to write the book (without considering royalty payments) is -$4.222 million.
Note: A negative NPV indicates that the investment (writing the book) is not financially favorable when compared to the opportunity cost (earnings from speaking).
Learn more about NPV here:
brainly.com/question/29525757
#SPJ11
Check My Work eBook Problem 7-06 A widow currently has a $89,000 investment that yields 7 percent annually. Can she withdraw $11,000 for the next fifteen years? Use Appendix D to answer the question.
The future value of the investment after fifteen years is approximately $264,052.95.
To determine if the widow can withdraw $11,000 for the next fifteen years from her $89,000 investment .
yielding 7 percent annually, we need to calculate the future value of the investment and see if it is greater than or equal to $11,000 per year for fifteen years.
First, let's calculate the future value of the investment after fifteen years using the compound interest formula:
Future Value = Present Value * (1 + Interest Rate)^Number of Years
Present Value = $89,000
Interest Rate = 7% = 0.07
Number of Years = 15
Future Value = $89,000 * (1 + 0.07)¹⁵
Using Appendix D, which provides the future value of $1 for various interest rates and time periods, we can find the factor for (1 + 0.07)¹⁵.
Looking up the factor for 7% for 15 years in Appendix D, we find the value to be 2.9655.
Now, let's calculate the future value:
Future Value = $89,000 * 2.9655
Future Value = $264,052
Since the future value is greater than $11,000 per year for fifteen years, the widow can withdraw $11,000 annually from her investment.
Learn more about investment here:
https://brainly.com/question/15105766
#SPJ11
Sheffield Corp. is planning to sell 600 boxes of ceramic tile with production estimated at 770 boxes during May. Each box of tile requires 44 pounds of day mix and a 0.25 hour of direct labor. Clay mix costs $0,40 per pound and employees of the company are paid 516 per hour. Manufacturing overhead is applied at a rate of 110% of direct labor costs. Sheffield hos 4600 pounds of clay mix in beginning inventory and wants to have 4100 poundsin ending inventory What is the total amount to be budgeted for manufacturing overhead for the month O $10560 O $13552 $2640 O $3388 < Question 15 of 30 > -12 E View Policies Current Attempt in Progress Waterway Industries is planning to sell 1300 boxes of ceramic tile, with production estimated at 1270 boxes during May. Each box of tile requires 40 pounds of clay mix and a 0.25 hour of direct labor. Clay mix costs $0.30 per pound and employees of the company are paid $11 per hour Manufacturing overhead is applied at a rate of 110% of direct labor costs. Waterway has 3600 pounds of clay mix in beginning inventory and wants to have 4900 poundsin ending inventory What is the total amount to be budgeted for direct labor for the month? $3493 O $13972 O $55888 $3575
To calculate the total amount to be budgeted for direct labor for the month, we need to determine the direct labor cost per box of ceramic tile and then multiply it by the estimated production.
Given information:
Production estimated: 1270 boxes
Each box requires 0.25 hours of direct labor
Employees are paid $11 per hour
Calculate the total direct labor cost per box:
Direct labor cost per box = Direct labor rate per hour × Direct labor hours per box
Direct labor cost per box = $11 × 0.25 = $2.75
Calculate the total direct labor cost for the estimated production:
Total direct labor cost = Direct labor cost per box × Estimated production
Total direct labor cost = $2.75 × 1270 = $3,492.50
Therefore, the total amount to be budgeted for direct labor for the month is $3,492.50.
learn more about labor cost here
https://brainly.com/question/27873323
#SPJ11
Search the Internet for the websites of organization development and other management
consultants. Try to find an explicit or implicit model of organization or organizational
change that they recommend. How do these relate to the approaches presented in Chapter
4?
Few websites of organization development and other management consultants are www.od-consultants.com
hrweb.mit.eduwww.odportal.comwww.codhyd.orgwww.helioshr.comModel for organization development:Phase 1: Plan: Identify the problem, define the situation, identify and describe the target audience, and define the intended outcomes.
Phase 2: Design: Create content for the topic and activities for delivery.
Phase 3: Implement: Measure participation in the program through appropriate delivery methods.
Phase 4: Measure: Conduct an evaluation of the entire program to measure its impact. Report the results to stakeholders.
Organisational development:Hierarchical improvement is an arranged, precise change in the qualities or tasks of workers to make generally speaking development in an organization or association. Because it adheres to a specific protocol that management clearly communicates to all employees, it differs from everyday operations and workflow enhancements.
What is the course of OD?The steps of the organizational development process are organized and based on research. Normal execution steps incorporate the accompanying: determining a need for improvement. Finding a need that is in line with business objectives is the first step in organizational change.
Learn more about organization development :
brainly.com/question/15278438
#SPJ4
For a particular SKU, the lead time is 4 weeks, the average demand is 125 units per week, and safety stock is 100 units. What is the average inventory if 1600 units are ordered at one time? What is the order point?
The average inventory is 600 units.
The order point is 600 units.
To calculate the average inventory, we need to consider the average demand during the lead time and the safety stock.
Average Inventory = (Average Demand per week * Lead Time) + Safety Stock
Given:
Lead Time = 4 weeks
Average Demand per week = 125 units
Safety Stock = 100 units
Average Inventory = (125 units/week * 4 weeks) + 100 units
Average Inventory = 500 units + 100 units
Average Inventory = 600 units
Therefore, the average inventory is 600 units.
To calculate the order point, we need to consider the average demand during the lead time and the safety stock.
Order Point = (Average Demand per week * Lead Time) + Safety Stock
Given:
Lead Time = 4 weeks
Average Demand per week = 125 units
Safety Stock = 100 units
Order Point = (125 units/week * 4 weeks) + 100 units
Order Point = 500 units + 100 units
Order Point = 600 units
Therefore, the order point is 600 units.
To know more about inventory, visit:
https://brainly.com/question/17192781
#SPJ11
Why might both management and a union agree to the last chance
agreement?
Explain the typical grievance process.
What are the advantages and disadvantages of grievance
mediation?
Why is the progressiv
Both management and a union might agree to the last chance agreement for different reasons. Management might do so because it could help them avoid expensive and time-consuming lawsuits.
On the other hand, a union might agree to it to save the job of an employee who would otherwise lose it. It is common for a last chance agreement to be used to settle disciplinary disputes where the employee's behavior is considered serious enough to warrant termination, but the union believes that the employee should be given a second chance.The typical grievance process is as follows: Employee presents the complaint to the supervisor in the workplace. Supervisor answers within a specified time, usually within a week.If not resolved, the complaint is passed on to higher management levels with responses given at each level. A meeting is arranged between the union and management to discuss the grievance. If not resolved, an arbitrator or mediation services may be used to assist in resolving the dispute.The advantages of grievance mediation include resolving issues quickly and efficiently, saving time and resources, and ensuring that both parties get to air their grievances in a neutral and fair setting. The disadvantage is that the mediator is not a decision-maker, and the solution might not be satisfactory to either party. Progressive discipline is a process of increasing the severity of disciplinary action against an employee who continues to violate company policies or perform poorly despite being warned. The goal of progressive discipline is to help employees improve their performance and behavior rather than to punish them. The employer must first issue verbal warnings, then written warnings, then suspension, and finally termination if the behavior is not corrected.
To know more about agreement visit :-
https://brainly.com/question/32579265
#SPJ11
Find the solutions of the following difference equations with the given values of xo: a) Xt+1 = 2x + 4, Xo = 1 b) 2x+1 + 3x + 2 = 0, Xo = -1 c) 3x+1 = x + 2 = 0, Xo = 2 d) Xt+1-xt + 3 = 0, Xo = 3
a) The solution for equation a) is Xt = 2^t * (x₀ + 2) - 2. b) The solution for equation b) is Xt = (-2/3)^t * (x₀ + 1) - 2/3. c) The solution for equation c) is Xt = (2/3)^t * (x₀ - 2) + 2/3. d) The solution for equation d) is Xt = 2^t * (x₀ - 3) - 3t - 2.
a) For equation a), the difference equation Xt+1 = 2Xt + 4 is a linear difference equation. By solving the equation recursively, we find the solution Xt = 2^t * (x₀ + 2) - 2, where x₀ is the initial value.
b) Equation b) is a non-linear difference equation 2Xt+1 + 3Xt + 2 = 0. To solve it, we use the substitution Xt = (-2/3)^t * (x₀ + 1) - 2/3, where x₀ is the initial value.
c) Equation c) is a non-linear difference equation 3Xt+1 = Xt + 2. We solve it by substituting Xt = (2/3)^t * (x₀ - 2) + 2/3, where x₀ is the initial value.
d) Equation d) is a non-linear difference equation Xt+1 - Xt + 3 = 0. By solving it recursively, we find the solution Xt = 2^t * (x₀ - 3) - 3t - 2, where x₀ is the initial value.
In each case, the solutions are expressed in terms of the initial value x₀ and the term t, which represents the time step. The solutions provide a general formula to calculate the value of Xt at any time step t based on the initial value x₀.
Learn more about Substitution method here: brainly.com/question/14619835
#SPJ11
From 2009 to 2010, nominal gross domestic product (GDP) in the United States grew by 4 percent. Given that the population grew by 1 percent and price level grew by 1.8 percent, calculate the growth rate of real GDP per capita. Answer: The growth rate of real GDP per capita = %
To calculate the growth rate of real GDP per capita, we need to consider the changes in nominal GDP, population, and the price level.
The growth rate of real GDP per capita can be calculated using the following formula:
Growth rate of real GDP per capita = Growth rate of nominal GDP - Growth rate of population
Given that the nominal GDP grew by 4 percent and the population grew by 1 percent, we can substitute these values into the formula:
Growth rate of real GDP per capita = 4% - 1% = 3%
However, we also need to consider the change in the price level. As the price level grew by 1.8 percent, we need to adjust the calculation accordingly:
Growth rate of real GDP per capita = Growth rate of nominal GDP - Growth rate of population - Inflation rate
Growth rate of real GDP per capita = 4% - 1% - 1.8% = 1.2%
Learn more about price here:
https://brainly.com/question/20703640
#SPJ11
What is a "kereitsu"?
"Keiretsu" is a Japanese term referring to a unique form of business organization characterized by close relationships and cross-shareholdings among interconnected companies. It originated in post-World War II Japan as a means of rebuilding and competing globally.
"Kereitsu" refers to the Japanese term "keiretsu," which is a unique form of business organization found in Japan. Keiretsu translates to "enterprise group" or "group of companies" and represents a network of interconnected businesses. It is characterized by close relationships and cross-shareholdings among member companies.
Keiretsu originated in the post-World War II era as a means for Japanese companies to rebuild and compete globally. These networks typically consist of a core company, called a "parent," which exercises control over affiliated companies, known as "subsidiaries." Keiretsu members often share resources, collaborate on research and development, and engage in joint ventures.
Keiretsu can be classified into two main types: horizontal keiretsu, which involve companies from different industries collaborating to share resources and reduce costs, and vertical keiretsu, where companies along the supply chain maintain close ties for efficient production and distribution.
To learn more about Keiretsu
https://brainly.com/question/30903924
#SPJ4
what is the outcome of this mutation with regard to the ultimate protein that will form from this sequence?
The outcome of a mutation with regard to the ultimate protein that will form from this sequence can be beneficial, harmful, or have no effect.
Mutations are changes that occur in the DNA sequence of an organism. The mutation can affect the genetic material in different ways, including by altering, deleting, or inserting a nucleotide. The ultimate protein that will form from this sequence is affected by this mutation.In molecular biology, a protein is a polymer molecule that is made up of amino acids joined by peptide bonds. Proteins are responsible for numerous functions in the body, including catalyzing metabolic reactions, transmitting signals throughout the body, and providing structural support.The mutation can have different outcomes with regard to the ultimate protein that will form from this sequence. Some mutations can be beneficial, while others can be harmful or have no effect. When a mutation occurs in the DNA sequence of a gene, it can affect the protein that the gene codes for. The effect of the mutation on the protein can depend on the type of mutation that occurs.For instance, a silent mutation has no effect on the protein because it codes for the same amino acid as the original sequence. On the other hand, a missense mutation can lead to a change in the amino acid sequence of the protein. If the amino acid is an important part of the protein's structure, the mutation can affect the protein's function. Therefore, the outcome of a mutation with regard to the ultimate protein that will form from this sequence can be beneficial, harmful, or have no effect.
To know more about DNA sequence visit :
https://brainly.com/question/31650148
#SPJ11
a. Discuss THREE ways in which maritime transport makes an important contribution to economic growth in the Caribbean. (9 marks) b. Discuss FOUR probably reasons why the government of Jamaica still have an influential presence in the transportation industry. (12 marks) c Briefly explain TWO major factors that influence the demand of international transport services (4 marks)
a. Three ways in which maritime transport makes an important contribution to economic growth in the Caribbean are:1. Revenue and employment opportunities are provided by the shipping industry. It is critical to the economies of many Caribbean nations.
2. Since many islands in the Caribbean are not linked by road or rail, shipping is critical for transporting goods and individuals. This is referred to as inter-island transport. The shipping sector has played a critical role in inter-island trade in the Caribbean for many years.3. Since trade between the Caribbean and other nations is primarily carried out by sea, the shipping industry plays an essential role in the region's international trade.
b. Four probable reasons why the Jamaican government still has an influential presence in the transportation industry are:1. To ensure that transportation costs are kept to a minimum, the Jamaican government is still subsidizing public transportation.2. In order to have a reliable and efficient transport system, the Jamaican government is still responsible for the country's transportation infrastructure.3. To avoid congestion on the island's roadways, the Jamaican government is still promoting the use of public transportation.4. The Jamaican government is still encouraging the use of alternative modes of transportation in order to reduce the country's carbon footprint.c. Two major factors that influence the demand of international transport services are:1. The price of international transport services is the first factor that affects demand. When prices increase, demand decreases, and when prices decrease, demand increases.2. The level of economic development in a country is the second factor that affects demand. The more economically developed a country is, the more likely it is to have a higher demand for international transport services, and vice versa.
To know more about maritime transport visit:
https://brainly.com/question/32124571
#SPJ11
Palvest Company's ledger shows the following balances on December 31, 2020. 6% Preferred stock, $100 par value, outstanding 20,000 shares Common stock, $10 par value, Issued 300,000 shares Retained earnings $2,000,000 3,000,000 1,000,000 Required Assuming that the directors decide to declare total cash dividends in the amount of $810,000, use the following table to determine how much each class of stock should receive under each of the assumptions stated below. Three years' dividends are in arrears on the preferred stock.
$20,625 for preferred stockholders and $309,375 for common stockholders.
Palvest Company's ledger shows the following balances on December 31, 2020:Common stock, $10 par value, Issued 300,000 shares6% Preferred stock, $100 par value, outstanding 20,000 shares
Retained earnings
$2,000,000
3,000,000
1,000,000
Assuming that the directors decide to declare total cash dividends in the amount of $810,000 and the three years' dividends are in arrears on the preferred stock, how much each class of stock should receive under each of the assumptions stated below.
The first assumption is to pay the preferred dividend in full and distribute the balance of the dividends on a pro-rata basis. The second assumption is to pay the preferred dividend in full and then pay $1 per share on the common stock.Preferred dividend in full $20,000 x $100 x 6% = $120,000.Dividends in arrears 20,000 x $100 x 6% x 3 = $360,000.Total preferred dividends = $480,000.Balance for common stockholders $810,000 - $480,000 = $330,000.Total shares outstanding are 300,000 + 20,000 = 320,000 shares.(i) Under the first assumption, Preferred stock will receive $480,000 as follows:$120,000 (current year's preferred dividend) + $360,000 (dividends in arrears).The remaining amount of $330,000 is shared between preferred and common stocks according to the pro-rata basis.Pro-rata distribution:$330,000 x 20,000/320,000 = $20,625 for the preferred stockholders.$330,000 x 300,000/320,000 = $309,375 for common stockholders.(ii) Under the second assumption, Preferred stock will receive $480,000 as follows:$120,000 (current year's preferred dividend) + $360,000 (dividends in arrears).The remaining balance is $330,000, which will be distributed to common stockholders only.$330,000 / 300,000 common shares = $1.10 per share.
Hence, under the given assumptions, each class of stock should receive:$20,625 for preferred stockholders and $309,375 for common stockholders.
To know more about earnings visit:
https://brainly.com/question/28045589
#SPJ11
