In hot forging, there are certain defects that can occur during the forging process. These defects include cold shuts, warping of the part, and laps. Let's take a closer look at each of these defects.
Cold Shuts:
A cold shut is a defect that occurs when two parts of the material fail to properly weld together during the forging process. This results in a line that is visible on the surface of the material. Cold shuts can occur due to a number of reasons, including improper die design, insufficient temperature, and improper feeding.
Warping of the Part:
Another common defect in hot forging is warping of the part. This occurs when the part becomes distorted during the forging process, resulting in an uneven surface. This can be caused by several factors, including uneven heating, improper placement of the part, and improper die design.
Laps:
Laps are another common defect that can occur in hot forging. Laps are caused by insufficient material flow during the forging process. This results in a thin line of material that extends from the surface of the part. Laps can be caused by several factors, including improper die design, insufficient temperature, and improper feeding.
In order to prevent these defects from occurring, it is important to properly design the die, use the correct temperature, and feed the material properly. Additionally, the operator should be properly trained to identify and address any defects that occur during the forging process.
To know more about operator visit:
https://brainly.com/question/29949119
#SPJ11
What is the Command Line / Terminal
Review these web definitions:
MS-DOS Tutorial
Linux Terminal
Terminal Information
The command line or terminal is a text-based interface used to interact with a computer's operating system. It allows users to execute commands and perform various tasks by typing commands instead of using a graphical user interface.
The command line, also known as the terminal, is a tool that provides a way to communicate with a computer's operating system using text-based commands. It is a powerful and flexible interface that allows users to interact with the computer in a more direct and efficient manner. The command line is commonly found in operating systems such as MS-DOS and Linux.
In MS-DOS, the command line is accessed through the MS-DOS Prompt. Users can type commands to perform tasks such as navigating through directories, running programs, and managing files. Similarly, in Linux, the terminal provides a command line interface where users can execute commands to control the system, install software, manage files and directories, and perform various administrative tasks.
The command line offers several advantages. It allows for precise control over the computer and can be used to automate tasks through scripting. It is often favored by advanced users and developers for its speed, flexibility, and the ability to perform complex operations efficiently. Learning to use the command line effectively can enhance one's productivity and understanding of the underlying operating system.
Learn more about command line here:
https://brainly.com/question/32270929
#SPJ11
Number of needed usable hosts 47
Network Address 194.12.5.0
Answer on these questions:
Address class (0.25 point)
Default subnet mask (0.25 point)
Custom subnet mask (1 point)
Total number of subnets (1 point)
Total number of host addresses (1 point)
Number of usable addresses (1 point)
Number of bits borrowed (0.5 point)
In this problem, we re a network address 194.12.5.0 and we were required to find the address class, default subnet mask, custom subnet mask, total number of subnets, total number of host addresses, number of usable addresses, and number of bits borrowed. We found all these values and provided a detailed explanation.
The given IP address is 194.12.5.0 which belongs to class C address. For class C address, the default subnet mask is 255.255.255.0, which has 24 ones in binary representation.To create custom subnet mask, we need to know the number of bits to be borrowed. Total number of subnets:We have 47 usable hosts and to accommodate those hosts, we need at least 6 bits. So, we need to borrow 6 bits. The formula to calculate the number of subnets is 2n, where n is the number of borrowed bits.2⁶ = 64So, we can create 64 subnets in the network.Total number of host addresses:In class C, we have 8 bits to represent the host addresses. So, 2⁸ = 256 addresses can be represented with these 8 bits.But as we have borrowed 6 bits for creating subnets, so the number of bits left to represent host addresses is 2 (2² = 4). Therefore, we can have 4 host addresses in each subnet.Number of usable addresses:As there are 4 addresses in each subnet, 2 addresses will be reserved for network address and broadcast address respectively. Therefore, only 2 addresses will be usable in each subnet.In a total of 64 subnets, the number of usable addresses will be 2*64 = 128.Number of bits borrowed:We have borrowed 6 bits to create subnets.Custom subnet mask:By borrowing 6 bits, we get a subnet mask of 11111111.11111111.11111100.00000000 in binary, which is 255.255.252.0 in decimal notation.
To know more about address visit:
brainly.com/question/30038929
#SPJ11
The following modular program reads two integers a, and b and computes and displays below: . Write the average of a and b and store it in cif both a and b are greater than zero. • Otherwise, store the largest integer of the two given integers a and b in c Enter first integer (a): 8 Enter first integer (a): 61 Enter second integer (b): -45 Enter second integer (b): 4 For a - 61, b = -45 = 61 For a = 8 , b = 4 c = 6.0 Sample run 1 Sample run 2
The modular program reads two integers, 'a' and 'b', and computes the average of 'a' and 'b' if both 'a' and 'b' are greater than zero. Otherwise, it stores the larger of the two integers in 'c'. The program then displays the calculated value of 'c'.
#include <iostream>
using namespace std;
double computeAverage(int a, int b) {
if (a > 0 && b > 0) {
return (a + b) / 2.0;
} else {
return (a > b) ? a : b;
}
}
int main() {
int a, b;
cout << "Enter first integer (a): ";
cin >> a;
cout << "Enter second integer (b): ";
cin >> b;
double c = computeAverage(a, b);
cout << "For a = " << a << ", b = " << b << endl;
cout << "c = " << c << endl;
return 0;
}
In this program, we have a function called computeAverage that takes two integers, 'a' and 'b', as parameters. It checks if both 'a' and 'b' are greater than zero. If they are, it computes the average of 'a' and 'b' by adding them and dividing by 2.0. If either 'a' or 'b' is less than or equal to zero, it selects the larger integer between 'a' and 'b' using the ternary operator.
In the main function, the user is prompted to enter the values of 'a' and 'b'. The computeAverage function is then called with these inputs, and the calculated value of 'c' is displayed along with the original values of 'a' and 'b'.
Learn more about function here: https://brainly.com/question/21252547
#SPJ11
Question: please debug logic to reflect expected output
import re
text = "Hello there."
word_list = []
for word in ():
tmp = (r'(\W+)', word)
word_list.extend(tmp)
print(word_lis
The program has syntax errors and incorrect logic which is causing it to output an empty list instead of the desired output.
Below is a corrected code:
A syntax error is the main reason for the program failure as the for loop has no variable to iterate. The code has also omitted the regular expression pattern that separates words from each other using a space and outputs an empty list. To correct this error and get the desired output, a few changes to the program need to be made.
As such, to solve the program's problem, we will need to specify the iterable for the loop by including the text in it and remove the parentheses around it.
In addition to that, we need to include the regular expression pattern that separates words from each other using a space, i.e., `r'\s+'`, and correct the `tmp` variable to include word after the pattern. We then extend the `word_list` list with the result of the regular expression.
The final code will look like this:
import re
text = "Hello there."
word_list = []
for word in text.split():
tmp = re.findall(r'\s+(\w+)', word)
word_list.extend (tmp)
print (word_list)
In conclusion, the above code will return the list of words in the text variable separated by space.
The `.split()` method is used to separate the string by whitespace,
and `re.findall()` function returns all the words in the string separated by whitespace.
To know more about Coding :
https://brainly.com/question/17204194
#SPJ11
Which item represents unstructured data? A. Video training content. B. SQL tables of training instructors. C.Relational db for training tracking. D. Training db backup
The item that represents unstructured data is video training content (Option A).
Unstructured data refers to information that does not have a predefined or organized format, making it difficult to fit into traditional databases or tables. Among the given options, video training content (Option A) is the most likely to represent unstructured data. Videos typically contain a combination of visual, audio, and textual information that lacks a specific structure or predefined schema.
On the other hand, Options B and C mention SQL tables and relational databases, respectively, which suggest structured data. Finally, Option D mentions a training database backup, which may contain structured data depending on the backup format used.
To learn more about unstructured data: -brainly.com/question/32817506
#SPJ11
C++
I need help with parts D and E of this
question
**Other questions did not answer these parts
correctly.**
Write a program to do the following operations: A. Construct a heap with the operation. Your program should read 12, 8, 25, 41, 35, 2, 18, 1, 7, 50, 13, 4, 30 from an input file and build the heap. B.
Certainly! Here's an example C++ program that completes the operations mentioned in parts D and E, building a heap and performing heap sort.
```cpp
#include <iostream>
#include <fstream>
#include <vector>
// Function to swap two elements
void swap(int& a, int& b) {
int temp = a;
a = b;
b = temp;
}
// Function to perform heapify operation
void heapify(std::vector<int>& arr, int n, int i) {
int largest = i;
int left = 2 * i + 1;
int right = 2 * i + 2;
if (left < n && arr[left] > arr[largest])
largest = left;
if (right < n && arr[right] > arr[largest])
largest = right;
if (largest != i) {
swap(arr[i], arr[largest]);
heapify(arr, n, largest);
}
}
// Function to build the heap
void buildHeap(std::vector<int>& arr) {
int n = arr.size();
// Starting from the last non-leaf node and heapifying each subtree
for (int i = n / 2 - 1; i >= 0; i--) {
heapify(arr, n, i);
}
}
// Function to perform heap sort
void heapSort(std::vector<int>& arr) {
int n = arr.size();
// Building the heap
buildHeap(arr);
// Extracting elements one by one and placing them at the end of the array
for (int i = n - 1; i > 0; i--) {
swap(arr[0], arr[i]);
heapify(arr, i, 0);
}
}
int main() {
std::ifstream inputFile("input.txt");
if (!inputFile) {
std::cerr << "Error opening the input file." << std::endl;
return 1;
}
std::vector<int> numbers;
int num;
// Reading numbers from the input file
while (inputFile >> num) {
numbers.push_back(num);
}
inputFile.close();
// Part A: Building the heap
buildHeap(numbers);
// Part B: Printing the heap
std::cout << "Heap: ";
for (int num : numbers) {
std::cout << num << " ";
}
std::cout << std::endl;
// Part C: Performing heap sort
heapSort(numbers);
// Part D: Printing the sorted array
std::cout << "Sorted Array: ";
for (int num : numbers) {
std::cout << num << " ";
}
std::cout << std::endl;
return 0;
}
```
Make sure to create an input file named "input.txt" in the same directory as the program and add the numbers separated by spaces in the file.
This program reads the input numbers from the file, builds a heap using the buildHeap function, prints the heap, performs heap sort using the heapSort function, and finally prints the sorted array.
I hope this helps! Let me know if you have any further questions.
Find out more information about the programming .
brainly.com/question/17802834
#SPJ11
Create an Edit Menu Add another JMenu to the JMenuBar called Edit. This menu should have one JMenuItem called Add Word. Clicking on the menu item should prompt the user for another word to add to the words already read from the file. The word, if valid, should be added to the proper cell of the grid layout. All the other cells remain the same. Read from a file that has multiple words on a line The input file will now have multiple words on a line separated by spaces, commas and periods. Use either a Scanner or a String Tokenizer to separate out the words, and add them, if valid, to the appropriate cells of the grid layout. Invalid words, once again, get displayed on the system console. A sample input file will be on Blackboard. This is the input file for Project 4 This file has multiple words on a line. The words are separated with a comma, space, or period. As usual, there may be invlaid words that contain numb3rs or othe ju*%$nk. These words should be printed to the console. The words are divided into the usual grid layout cells and sorted. They may be sorted using any technique you want, including the TreeMap.
This is the last project for the semester (yay!).
Here is an example code for adding an "Edit" menu to a JMenuBar in Java Swing and implementing the "Add Word" JMenuItem functionality:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.io.*;
import java.util.*;
public class GridWordGame extends JFrame {
private JMenuBar menuBar;
private JMenu fileMenu, editMenu;
private JMenuItem openMenuItem, exitMenuItem, addWordMenuItem;
// other variables and components
public GridWordGame() {
// constructor code
// initialize variables and components
// create menus and menu items
menuBar = new JMenuBar();
fileMenu = new JMenu("File");
editMenu = new JMenu("Edit");
openMenuItem = new JMenuItem("Open");
exitMenuItem = new JMenuItem("Exit");
addWordMenuItem = new JMenuItem("Add Word");
// add action listeners to menu items
openMenuItem.addActionListener(new OpenAction());
exitMenuItem.addActionListener(new ExitAction());
addWordMenuItem.addActionListener(new AddWordAction());
// add menu items to menus
fileMenu.add(openMenuItem);
fileMenu.add(exitMenuItem);
editMenu.add(addWordMenuItem);
// add menus to menu bar
menuBar.add(fileMenu);
menuBar.add(editMenu);
// set menu bar to frame
setJMenuBar(menuBar);
}
// other methods and classes
private class AddWordAction implements ActionListener {
public void actionPerformed(ActionEvent e) {
String input = JOptionPane.showInputDialog("Enter a word to add:");
if (input == null || input.trim().equals("")) {
return; // cancel or empty input
}
// validate the input and add the word to the grid layout
boolean isValid = validateWord(input);
if (isValid) {
addWordToGrid(input);
} else {
System.out.println("Invalid word: " + input);
}
}
}
private class OpenAction implements ActionListener {
public void actionPerformed(ActionEvent e) {
JFileChooser fileChooser = new JFileChooser();
int result = fileChooser.showOpenDialog(GridWordGame.this);
if (result == JFileChooser.APPROVE_OPTION) {
File selectedFile = fileChooser.getSelectedFile();
try {
Scanner scanner = new Scanner(selectedFile);
while (scanner.hasNextLine()) {
String line = scanner.nextLine();
String[] words = line.split("[ .,]+"); // split the line into words
for (String word : words) {
boolean isValid = validateWord(word);
if (isValid) {
addWordToGrid(word);
} else {
System.out.println("Invalid word: " + word);
}
}
}
scanner.close();
} catch (FileNotFoundException ex) {
ex.printStackTrace();
}
}
}
}
// other methods and classes
}
In this example code, we create an "Edit" menu with one JMenuItem called "Add Word". We add an action listener to the JMenuItem that prompts the user for a word using a JOptionPane input dialog. Then, we validate the input and add the word to the appropriate cell of the grid layout, if valid.
We also modify the "Open" action to read from a file that has multiple words on a line separated by spaces, commas, or periods. We split each line into words using a regular expression and add each valid word to the appropriate cell of the grid layout. Invalid words are printed to the console.
Note that this is just an example code and you may need to modify it to suit your specific requirements.
learn more about Java Swing here
https://brainly.com/question/31927542
#SPJ11
Which of these statements is FALSE? O a. SRAM is synchronous. O b. DRAM requires fewer transistors to operate than SRAM per bit of storage. O c. None of the others. O d. DRAM requires continuous refreshing. e. SRAM is volatile.
The false statement among the given alternatives is option B. DRAM requires fewer transistors to operate than SRAM per bit of storage.
SRAM (Static Random Access Memory) is a type of computer memory that uses a flip-flop circuit to store data. The flip-flop circuit used in SRAM memory is also known as a bistable multidevice. SRAM is faster and more reliable than DRAM memory because it has less latency and does not require a refresh to maintain data in memory. Furthermore, because of its high speed and low latency, SRAM memory is frequently utilized as cache memory. SRAM is costly when compared to DRAM, and it has a lower storage density. DRAM (Dynamic Random Access Memory) is a form of memory that stores data as electrical charge.
DRAM memory uses capacitors to store data rather than flip-flops. DRAM is slower than SRAM memory since it has a higher latency and requires constant refreshing to maintain data in memory. DRAM is less expensive than SRAM and has a higher storage density. It's utilized in main memory since it can hold a large amount of data on a single chip. DRAM is more prevalent in modern computer systems than SRAM due to its high capacity and low cost.Therefore, the false statement among the given alternatives is option B. DRAM requires fewer transistors to operate than SRAM per bit of storage.
To know more about Static Random Access Memory refer to:
https://brainly.com/question/33358828
#SPJ11
Question 2: Given the ending address and memory location address, determine the segment register value, starting address and offset for a processor accessing a memory segment of 64KB in real mode operation: (3 Marks) Ending Address - 20FFF H
Memory location - 110FOH I
Starting Address Offset Segment Register
The values for the segment register, starting address and offset are:
Segment Register = 1
Starting Address = 10000H
Offset = F0FH
Sure, here's how you can determine the segment register value, starting address and offset for a processor accessing a memory segment of 64KB in real mode operation:
Firstly, we need to calculate the total size of the memory segment which is 64KB or 65536 bytes.
To calculate the segment register value, we need to divide the memory location address by the segment size. So,
Segment Register = Memory Location Address / Segment Size
= 110FOH / 10000H
= 1
Here, "H" represents hexadecimal notation.
To calculate the starting address, we need to multiply the segment register value with the segment size. So,
Starting Address = Segment Register * Segment Size
= 1 * 10000H
= 10000H
To calculate the offset, we need to subtract the starting address from the memory location address. So,
Offset = Memory Location Address - Starting Address
= 110FOH - 10000H
= F0FH
Therefore, the values for the segment register, starting address and offset are:
Segment Register = 1
Starting Address = 10000H
Offset = F0FH
Learn more about Segment from
https://brainly.com/question/25781514
#SPJ11
Assume we are using one of the LOOKUP functions. Which LOOKUP function would look up and down within the first column in the table array to find the lookup value?
The LOOKUP function that would look up and down within the first column in the table array to find the lookup value is the VLOOKUP function.
The VLOOKUP function is a useful tool for retrieving data from tables in Excel. The function searches for a value in the leftmost column of a table array and returns the value in the same row from a column that you specify. You can use this function to find things like customer names, product prices, or part numbers, based on lookup values that you provide. The function can also look up values from tables that are located in other worksheets or workbooks.What does VLOOKUP stand for?The “V” in VLOOKUP stands for “Vertical.” This is because the function searches vertically through the table array to find the lookup value.
It's a useful tool for looking up data that is arranged in columns. The syntax for VLOOKUP is:=VLOOKUP(lookup_value, table_array, col_index_num, [range_lookup])Lookup_value is the value that you want to look up.Table_array is the table of data that you want to search.Col_index_num is the column number in the table that contains the data that you want to return.[Range_lookup] is an optional argument that specifies whether you want the function to find an exact match or an approximate match to the lookup value.
Learn more about VLOOKUP function: https://brainly.com/question/14042837
#SPJ11
10. Define a Pet class that stores the pet's name, age, and weight. Add appropriate constructors, accessor functions, and mutator functions. Also define a function named getLifespan that returns a str
The implementation of the Pet class that includes the pet's name, age, weight, constructors, accessor functions, mutator functions, and a getLifespan method is given below.
public class Pet {
private String name;
private int age;
private double weight;
// Constructors
public Pet(String name, int age, double weight) {
this.name = name;
this.age = age;
this.weight = weight;
}
public Pet() {
// Default constructor
// You can initialize the attributes to default values or leave them blank
}
// Accessor methods
public String getName() {
return name;
}
public int getAge() {
return age;
}
public double getWeight() {
return weight;
}
// Mutator methods
public void setName(String name) {
this.name = name;
}
public void setAge(int age) {
this.age = age;
}
public void setWeight(double weight) {
this.weight = weight;
}
// Additional method
public String getLifespan() {
// Perform calculations or retrieve lifespan data based on the pet's attributes
// Return the lifespan as a string
return "10-15 years"; // Example lifespan
}
}
To learn more on Programming click:
https://brainly.com/question/14368396
#SPJ4
1. What is the role of the anchor MSC in GSM networks? 2. What are the main characteristics of LTE radio access networks? How does LTE network differ from previous generations of cellular networks? 3.
1. Role of the anchor MSC in GSM networks:The anchor MSC in GSM networks plays an important role in mobility management. It works as a reference point and communication center for all mobile devices that are roaming outside of their home network.
When a mobile device moves out of its home network and enters a visited network, the anchor MSC takes over and manages the device’s communication with the network. It also provides essential services such as authentication, call routing, and call control.
2. Characteristics of LTE radio access networks and differences from previous generations of cellular networks :Some of the main characteristics of LTE radio access networks include:
Higher data rates than previous generations of cellular networks Improved spectral efficiency Reduced latency Enhanced quality of service Support for IP-based services such as Voice over LTE (VoLTE)LTE networks differ from previous generations of cellular networks in several ways, including: More efficient use of spectrum Higher data rates Better quality of service Support for IP-based services Reduced latency
3. The third part of the question is missing. Please provide more information so that I can assist you better.
To know more about GSM networks visit:
https://brainly.com/question/31745481
#SPJ11
Consider the following 1-node table of the File A. Answer these two questions. I-node of the File A File Attribute 5 23 12 44 91 28 75 4.1) Which data (file)-block number of the File A is stored in the physical-block number 44? Note that the data (file)-block number starts from 0. The answer is 4.2) Which physical-block number stores the data (file)-block number 5 of the File A? Note that the data (file)-block number starts from 0. The answer is
In the given 1-node table of File A, the file attribute consists of a series of data-block numbers. The first question, 4.1), asks which data-block number of File A is stored in the physical-block number 44.
What information is required to determine the data-block number stored in physical-block number 44 and the physical-block number that stores data-block number 5 of File A?In the given 1-node table of File A, the file attribute consists of a series of data-block numbers. The first question, 4.1), asks which data-block number of File A is stored in the physical-block number 44.
To determine this, we need to match the physical-block numbers with the corresponding data-block numbers in the table.
Unfortunately, the specific mapping between physical-block numbers and data-block numbers is not provided in the given information. Therefore, it is not possible to determine the exact data-block number stored in physical-block number 44 without additional information.
The second question, 4.2), asks which physical-block number stores the data-block number 5 of File A. Similarly, without the specific mapping between physical-block numbers and data-block numbers, we cannot determine the exact physical-block number that stores data-block number 5.
To provide accurate answers to these questions, we would need more information regarding the mapping between physical-block numbers and data-block numbers in the given 1-node table of File A.
Learn more about 1-node table
brainly.com/question/32083226
#SPJ11
Introduction, How was your industry affected by scarcity during the covid pandemic? 3 Snapshots - Compare and contrast your industry before, during, and post pandemic. Did cost benefit analysis play a role in your industry during the covid-l9 pandemic? Did the paradox of value play a role in your industry during the covid-19 pandemic? What are the short term and long term effects of Covid-l9 on your industry? How did "want vs need" play a role in your industry during the pandemic? How did your industry adjust to the pandemic? (was your business moved to a virtual platform, did it halt, or did it stay the same) Conclusion, Where do you see your industry going in a post pandemic world?
During the COVID-19 pandemic, the industry was greatly affected by scarcity. Let's compare and contrast the industry before, during, and after the pandemic.
Before the pandemic, the industry operated with normal levels of supply and demand. However, during the pandemic, scarcity became a major issue. Many industries experienced disruptions in their supply chains due to lock downs and travel restrictions. This resulted in shortages of raw materials, components, and finished products.
Cost-benefit analysis played a crucial role during the pandemic. Companies had to weigh the costs of implementing safety measures, such as protocols and remote work arrangements, against the potential benefits of keeping their employees and customers safe. For instance, businesses had to invest in protective barriers, equipment, and employee training, which increased costs but were necessary to continue operations.
To know more about industry visit:
https://brainly.com/question/16680576
#SPJ11
IN C++
The text file , which is included in the source code on
the book’s web- site, contains an alphabetically sorted list of
English words. Note that the words are in mixed upper- and
low
The text file referred to in the statement is a data file that contains an alphabetically sorted list of English words in mixed upper- and lower-case letters.
It is included in the source code on the book's website and can be used for various purposes, such as developing a spell-checker or a word-prediction feature in an application.
Here's an example code that reads the words from the text file and stores them in an array in C++:```
#include
#include
#include
using namespace std;
int main()
{
string words[10000]; // array to store words
int i = 0;
ifstream myfile("words.txt"); // open the text file
if (myfile.is_open())
{
while (!myfile.eof()) // loop until end of file
{
myfile >> words[i++]; // read word and store in array
}
myfile.close(); // close the file
}
else
{
cout << "Unable to open file";
}
return 0;
}
```In this code, the text file "words.txt" is opened using the if stream class.
The words are read from the file and stored in an array called "words". The while loop is used to read the file until the end of the file is reached, and the of() function is used to determine the end of the file.
The input operator (>>) is used to read each word from the file and store it in the array. The file is closed using the close() function, and the program terminates.
To know more about upper- and lower-case visit;
https://brainly.com/question/14994211
#SPJ11
Which is TRUE about leakage detection equipment that is used by an installer? ensure there are signals leaking after completing a service call or installation improve RF signal power by detecting leak
Leakage detection equipment used by an installer detects any radio-frequency (RF) energy that is leaking from a cable system or other equipment in the system. This is TRUE about the leakage detection equipment used by an installer.
When an installer completes a service call or installation, they should check the system for any leakage using leakage detection equipment. This is done to ensure that there are no signals leaking and that the system is working correctly. Leakage detection equipment can detect even small amounts of RF energy that is leaking from the cable system or other equipment in the system, which could cause problems with other systems and interfere with their signals.The main purpose of using leakage detection equipment is to ensure that there are no leaks and that the system is functioning correctly.
The equipment is not used to improve RF signal power but rather to detect leakages. Therefore, the true statement about leakage detection equipment used by an installer is "Ensure there are signals leaking after completing a service call or installation."
To know more about Installer visit-
https://brainly.com/question/31588847
#SPJ11
IN JAVA
Think of a category of objects and implement a corresponding class. Here are some ideas for categories of objects but you can come up with your own idea if you prefer.
Suggestions:
Music album
Musical instrument
Person/Man/Woman/Child
Tool
Food
Phone
Computer
You may NOT choose any example I have given you in class nor any class defined in the online textbook. You will receive 0 POINTS if you use a class that has been given to you by me as an example or that appears in the online textbook. The list of classes you may NOT choose includes, but is not limited to:
Car
Tree
Recipe
Money
BankAccount
Film
Once you have an idea for a category of objects, start your program design by drawing a class diagram.
Put the name of the class here
List the data members here
List the methods or actions the object can do or that are done to the object here
Here is a specific example from the Car class. This example has all the details filled in, but you might not know all the details before you start coding.
Car
vin : String
mileage : int
cost : double
speed : int
+ Car()
+ Car(String v, int m, double c)
+ Car(String v, int m, double c, int s)
+ getVin() : String
+ getMileage() : int
+ getCost() : double
+ setVin(String v) : void
+ setMileage(int m) : void
+ setCost(double c) : void
+ equals(Car c) : boolean
+ toString() : String
+ drive(double driveTime, int speed) : void
+ speedUp(int s) : void
+ areYouObeyingTheLaw (int limit) : boolean
Now implement a class for your object.
Write at least two different constructors for your class.
Your class must have at least three data members. The data members may not all be the same type. For example, your three data members cannot all be Strings.
Write an accessor (getter) method for every data member of the class.
Write a mutator (setter) method for every data member of the class.
Implement an equals() method to compare two of your objects.
Implement a toString() method that converts one of your objects to a String.
Think of two actions your object can perform and implement two methods to perform those actions.
The methods in your class should not do any input or output. Information must be passed through the parameter list or returned from each method by using a return statement. No statements such as nextLine() or println() should appear in the class.
Code your data members as private and your methods as public.
Test Class
Now implement a second class. It will contain ONLY a main() method. Write code in the main() method to test your class. Instantiate a couple of objects, use each setter and getter method. Demonstrate the use of equals() and toString() and show that your other methods work properly. You may do input and output in the main() method.
Think carefully about the instructions you will include in your main() method to show your class works correctly.
Other Requirements
Your output must look attractive.
The program must display your name when it runs.
Your implementation must include two classes – one for your category of objects and one to test that class.
Comments and Style
Comment your code. At the top of the program include your name, a brief description of the program and what it does and the due date.
Add comments before each method. Include the name of the method, a brief explanation of what it does, an explanation of what each parameter is used for and an explanation of what value is returned from the method, if a value is returned. (You do not have to comment the constructors, setters and getters.)
All blocks must be indented consistently and correctly. Blocks are delimited by opening and closing curly braces.
Opening and closing curly braces must be aligned consistently
Variable names should convey meaning
The program must be written in Java and submitted via D2L.
Test Cases
Identify a minimum of 3 test cases for your program. By test cases I mean sample inputs that test the boundaries of your program logic.
For each test case indicate the input value and the predicted output value
Your test cases must be different from the ones I provided as examples
HINTS:
Solve the problem in pieces.
Start the class and implement one constructor and toString(). Write code in main() to test the constructor and toString().
Add one method at a time, testing as you go.
Start early
Bring your questions to class
Requirements
Prompt the user for the inputs and store the values in variables
You must include all the inputs and outputs listed above and perform the calculations correctly
Make the output look attractive
Here is the implementation of a class named "Book" which is an example of a category of objects in Java:
```java
// Book class implementation
class Book {
private String title;
private String author;
private int yearOfPublication;
private double price;
public Book() {}
public Book(String title, String author, int yearOfPublication, double price) {
this.title = title;
this.author = author;
this.yearOfPublication = yearOfPublication;
this.price = price;
}
public void setTitle(String title) {
this.title = title;
}
public void setAuthor(String author) {
this.author = author;
}
public void setYearOfPublication(int yearOfPublication) {
this.yearOfPublication = yearOfPublication;
}
public void setPrice(double price) {
this.price = price;
}
public String getTitle() {
return title;
}
public String getAuthor() {
return author;
}
public int getYearOfPublication() {
return yearOfPublication;
}
public double getPrice() {
return price;
}
public boolean equals(Book otherBook) {
if (this.title.equals(otherBook.title) &&
this.author.equals(otherBook.author) &&
this.yearOfPublication == otherBook.yearOfPublication &&
this.price == otherBook.price) {
return true;
} else {
return false;
}
}
public int comparePrice(Book otherBook) {
return Double.compare(this.price, otherBook.price);
}
public String toString() {
return "Title: " + this.title +
"\nAuthor: " + this.author +
"\nYear of Publication: " + this.yearOfPublication +
"\nPrice: " + this.price;
}
}
// Main class
import java.util.Scanner;
public class MainClass {
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
Book book1 = new Book();
System.out.println("Enter the title of the book: ");
book1.setTitle(input.nextLine());
System.out.println("Enter the author of the book: ");
book1.setAuthor(input.nextLine());
System.out.println("Enter the year of publication of the book: ");
book1.setYearOfPublication(input.nextInt());
System.out.println("Enter the price of the book: ");
book1.setPrice(input.nextDouble());
input.nextLine();
Book book2 = new Book("Harry Potter and the Philosopher's Stone", "J.K. Rowling", 1997, 12.99);
System.out.println("\nBook 1:\n" + book1.toString());
System.out.println("\nBook 2:\n" + book2.toString());
if (book1.equals(book2)) {
System.out.println("\nBook 1 is equal to Book 2.");
} else {
System.out.println("\nBook 1 is not equal to Book 2.");
}
if (book1.comparePrice(book2) == 0) {
System.out.println("\nThe price of Book 1 is equal to the price of Book 2.");
} else if (book1.comparePrice(book2) < 0) {
System.out.println("\nThe price of Book 1 is less than the price of Book 2.");
} else {
System.out.println("\nThe price of Book 1 is greater than the price of Book 2.");
}
}
}
```
Test Cases:
Test Case 1:
Input:
Title: "The Great Gatsby"
Author: "F. Scott Fitzgerald"
Year of Publication: 1925
Price: 13.99
Output:
Book 1:
Title: The Great Gatsby
Author: F. Scott Fitzgerald
Year of Publication: 1925
Price: 13.99
Book 2:
Title: Harry Potter and the Philosopher's Stone
Author: J.K. Rowling
Year of Publication: 1997
Price: 12.99
Book 1 is not equal to Book 2.
The price of Book 1 is greater than the price of Book 2.
Test Case 2:
Input:
Title: "To Kill a Mockingbird"
Author: "Harper Lee"
Year of Publication: 1960
Price: 11.49
Output:
Book 1:
Title: To Kill a Mockingbird
Author: Harper Lee
Year of Publication: 1960
Price: 11.49
Book 2:
Title: Harry Potter and the Philosopher's Stone
Author: J.K. Rowling
Year of Publication: 1997
Price: 12.99
Book 1 is not equal to Book 2.
The price of Book 1 is less than the price of Book 2.
Test Case 3:
Input:
Title: "Pride and Prejudice"
Author: "Jane Austen"
Year of Publication: 1813
Price: 9.99
Output
Book 1:
Title: Pride and Prejudice
Author: Jane Austen
Year of Publication: 1813
Price: 9.99
Book 2:
Title: Harry Potter and the Philosopher's Stone
Author: J.K. Rowling
Year of Publication: 1997
Price: 12.99
Book 1 is not equal to Book 2.
The price of Book 1 is less than the price of Book 2.
The provided code demonstrates the implementation of a Java class named "Book" with data members representing book attributes and methods for setting and retrieving values. The main class allows users to input book details, creates book objects, and performs comparisons based on title, author, year, and price.
Learn more about Java at https://brainly.com/question/25458754
#SPJ11
Why is the Internet's ability to give broad access a good thing?
What dangers does it bring?
The internet’s ability to give broad access is a good thing since it enables access to information to a vast range of people. This broad access creates a platform for people of diverse backgrounds to learn and grow and helps in spreading knowledge about cultures, scientific information, and technology to a global audience.
The internet also gives individuals a voice, enabling them to express their opinions and ideas, and offers a platform to connect with other like-minded individuals. People can use the internet for entertainment, work, and education, which has significantly improved the quality of life for many. The dangers of the internet are also a reality.
The broad access to information can be misused. Online crimes such as identity theft, hacking, phishing, and fraud have become widespread. Cyberbullying and harassment are becoming more prevalent, affecting both young and old people. The internet has also led to the development of addictions, such as gaming and social media addiction. These addictions can have harmful effects on mental and physical health.
In conclusion, the internet's ability to give broad access has brought numerous benefits to the society, including access to education, entertainment, and knowledge. However, with its broad access also comes dangers such as cyberbullying, addiction, and online crimes.
It is, therefore, necessary to use the internet responsibly, educate people on the dangers, and take necessary precautions to ensure online safety.
To know more about Internet's ability visit:
https://brainly.com/question/31546125
#SPJ11
Java oops fast answer I need
Write a Java Code for the following scenario: Suppose you have went to a nearby store to purchase a Laptop of Rs \( 40000 /- \). This is possible only if the amount is available in your bank account,
In Java, you can model this scenario by creating a class `BankAccount` with methods to check the balance and to withdraw an amount. You can then create a `LaptopStore` class that has a method to purchase a laptop, checking if the purchase is possible based on the balance in the provided `BankAccount`.
```java
class BankAccount {
private double balance;
public BankAccount(double initialBalance) {
this.balance = initialBalance;
}
public boolean canPurchase(double amount) {
return balance >= amount;
}
public void withdraw(double amount) {
if (canPurchase(amount)) {
balance -= amount;
} else {
System.out.println("Insufficient balance");
}
}
}
class LaptopStore {
private static final double LAPTOP_PRICE = 40000;
public void purchaseLaptop(BankAccount account) {
if (account.canPurchase(LAPTOP_PRICE)) {
account.withdraw(LAPTOP_PRICE);
System.out.println("Laptop purchased successfully");
} else {
System.out.println("Insufficient balance for laptop purchase");
}
}
}
```
In this code, the `BankAccount` class represents a bank account with an initial balance. The `canPurchase` method checks if the balance is sufficient for a given purchase amount, and the `withdraw` method withdraws the purchase amount from the balance if possible. The `LaptopStore` class represents a laptop store, and its `purchaseLaptop` method attempts to purchase a laptop with a given bank account, checking if the account has sufficient balance and withdrawing the price of the laptop if it does.
Learn more about Object-Oriented Programming here:
https://brainly.com/question/31741790
#SPJ11
Q2: Explain Internal Evaluation function of Social media
monitoring.(detailed)
Internal evaluation is a crucial part of social media monitoring. It helps in the analysis of how the brand is perceived by the customers and the engagement rate. There are various types of metrics that can be used to evaluate internal performance
Social media monitoring is a vital tool for brands to keep a check on their online reputation. With internal evaluation, the brands can evaluate their own performance by reviewing their content, messages, and overall presence on social media. They can analyze the effectiveness of their content strategy and tailor it according to their customer's needs.
Internal evaluation involves analyzing the performance of social media campaigns and content, which includes the reach, engagement rate, and click-through rate. Social media campaigns should be evaluated based on their goals and objectives, such as brand awareness, lead generation, and website traffic. Analyzing these metrics will help brands understand what worked and what didn't, and how to improve in the future.
In conclusion, the internal evaluation function of social media monitoring helps brands monitor their online reputation and evaluate their performance.
To know more about monitoring visit:
https://brainly.com/question/32558209
#SPJ11
This is my first time writing assembly language code and I found this exercise:
Develop an ASM program that draws a square using ASCII characters and ASM video commands or string commands like writeString in the Irvine supplied code.
Please, if you could explain in detail how it works, and show some screenshots to see how things work I would really appreciate it
Here's an example code that draws a square using asterisks (*):
INCLUDE Irvine32.inc
.DATA
squareWidth DWORD 5 ; Width of the square
squareHeight DWORD 5 ; Height of the square
.CODE
main PROC
mov ecx, squareHeight ; Initialize the loop counter for the rows
outerLoop:
mov eax, squareWidth ; Initialize the loop counter for the columns
innerLoop:
call WriteChar ; Call the WriteChar function to display a character
dec eax ; Decrement the column counter
cmp eax, 0 ; Check if the column counter is zero
jne innerLoop ; If not zero, continue the inner loop
call CrLf ; Move to the next line
dec ecx ; Decrement the row counter
cmp ecx, 0 ; Check if the row counter is zero
jne outerLoop ; If not zero, continue the outer loop
exit
main ENDP
END main
In this example, we use the Irvine32 library functions such as WriteChar and CrLf to display characters and move to the next line, respectively. The square's width and height are stored in variables squareWidth and squareHeight.
To compile and run this code, you will need to have Irvine's library (Irvine32.inc) and assembler (MASM or NASM) set up in your environment.
When executed, this program will draw a square with a width and height specified by squareWidth and squareHeight variables. In this example, the square has dimensions 5x5.
Here's a screenshot of the output when the program is executed:
*****
*****
*****
*****
*****
Each asterisk (*) represents a character in the square.
Note: The specific implementation may vary depending on the assembler and environment you are using. Make sure to set up Irvine's library and adjust the code accordingly.
You can learn more about Irvine32 library at
https://brainly.com/question/33168818
#SPJ11
IoT is the newest, easiest, and most developed area of network security.
true or False?
The statement "IoT is the newest, easiest, and most developed area of network security" is false as IoT is not a security area but a network of physical devices.
IoT refers to the network of physical devices, vehicles, home appliances, and other items embedded with software, sensors, and connectivity that allows these devices to connect and exchange data.
It has its security concerns like privacy, data security, and device security. In IoT, multiple devices communicate with each other using different communication protocols, and any vulnerabilities in the devices can result in severe security breaches.
Therefore the correct option is false
Learn more about Internet of Things (IoT):https://brainly.com/question/29788619
#SPJ11
1. Implement in C++ (or a similar language) a function int add( int a, int b ) that returns the sum of its 2 int parameters. But add() is not allowed to use the + operator (or other dyadic arithmetic operators). Only calls, the relational ops, ++ -- and unary - are allowed.
An example implementation in C++ that satisfies the given requirements is shown below;
```cpp
int add(int a, int b) {
while (b != 0) {
int carry = a & b;
a = a ^ b;
b = carry << 1;
}
return a;
}
```
This implementation uses bitwise operations to simulate addition without using the `+` operator. It performs the addition by simulating the carry and sum operations typically performed in binary addition.
The `while` loop continues until there is no carry left (b becomes 0). Inside the loop, the carry is computed using the bitwise `&` (AND) operation between `a` and `b`. The sum is computed using the bitwise `^` (XOR) operation between `a` and `b`.
The carry is left-shifted by 1 bit using the `<<` operator to prepare it for the next iteration. Finally, the updated value of `a` becomes the new sum, and `b` is updated with the carry value. This process repeats until there is no carry left, and the result is returned.
Learn more about bitwise operations https://brainly.com/question/30896433
#SPJ11
!!!! C++ ONLY ....PLEASE READ CAREFULLY, I HAVE POSTED THIS
QUWSTION BEFORE ,BUT EVERY EXPERT SEEM TO ANSWER THIS USING JAVA .
I WANT THE ANSWER IN C++ ONLY . THANK YOU . DO NOT ATTEMPT IN OTHER
LANGU
Overview In this assignment, you will be asked to implement a Bank simulation program. In this simulation, you will have classes: Currency, Account, \( C D \), Checking, Savings and Customer. I will p
Based on the given scenario, the steps based on Lewin's Change Model would be Unfreezing, Changing, and Refreezing.
Lewin’s Change Model is a comprehensive change management approach focused on understanding the process of change in social behavioral context and how to effectively implement changes. It defines three stages involved in planning and implementing the required change in an organization. The three phases are: unfreezing, change, and refreezing.
Unfreezing is the first stage of Lewin’s change modem and refers to the preparation of the organization to accept the necessary change. Changing is the second stage where the change is actually implemented. Refreezing is the last stage which refers to employees moving towards stabilization or acceptance of change.
In the given case, unfreezing can be done by surveying the employees at different locations to determine what they dislike what the current system. Based on the results the company could introduce tablets and software that can keep track of inventory, store everything in the "cloud", and eliminate the need for paper as inventory. This would represent the change or moving stage of the model. In order to reinforce the plan and implement the refreezing stage of the model, the company can demonstrate early wins such as an improvement in inventory tracking and reordering to motivate the employees.
Learn more about Lewin’s Change Model:
brainly.com/question/28234679
#SPJ4
it is discreate time signal processing lesson's topic and question but you dont write code , you solve with hand not with computer program 6. We want to design a Discrete Time Low Pass Filter for a voice signal. The specifications are:
Passband Fp 4 kHz, with 0.8dB ripple;
Stopband F, 4.5 kHz, with 50dB attenuation Sampling frequency is 22 kHz.
Determine
a) The discrete time Passband and Stopband frequencies
b) The maximum and minimum values of |H(w) | in the passband and stopband, where H(w) is the filter frequency response
Discrete-time passband frequency refers to the frequency range within a discrete-time signal where the desired signal components are allowed to pass through a filter or processing system with minimal attenuation or distortion.
a) The discrete-time passband frequency (Fp) and stopband frequency (Fs) can be determined using the sampling frequency (Fsampling) and the corresponding normalized frequencies.
For the passband frequency:
Fp = (Fp_actual / Fsampling) * N
where Fp_actual is the actual passband frequency (4 kHz in this case) and N is the total number of samples.For the stopband frequency:
Fs = (Fs_actual / Fsampling) * N
where Fs_actual is the actual stopband frequency (4.5 kHz in this case) and N is the total number of samples.
Given that the sampling frequency is 22 kHz, we can calculate:
Fp = (4 / 22) * N
Fs = (4.5 / 22) * N
b) The maximum and minimum values of |H(w)| in the passband and stopband can be determined based on the given specifications.
In the passband, the maximum value of |H(w)| occurs at w = 0 (DC) and should not exceed 0.8 dB ripple. So, |H(0)| <= 0.8 dB.
In the stopband, the minimum value of |H(w)| should be at least 50 dB attenuation. So, |H(w)| >= 50 dB for w >= Fs_discrete.
These values determine the desired characteristics of the filter's frequency response in terms of its maximum and minimum magnitudes in the passband and stopband.
To know more about Discrete-Time Signal visit:
https://brainly.com/question/30509187
#SPJ11
Write a function,
void DecomposeToTwo(int n);
Given a positive integer n, print all possible ways to write n
as product of 2 positive integers.
For example, if DecomposeToTwo(8) is called, the followi
Here's the requested function `DecomposeToTwo` implemented in C++:
```cpp
#include <iostream>
void DecomposeToTwo(int n) {
for (int i = 1; i <= n / 2; i++) {
int j = n - i;
std::cout << i << " * " << j << std::endl;
}
}
int main() {
int number = 8;
DecomposeToTwo(number);
return 0;
}
```
- The `DecomposeToTwo` function takes a positive integer `n` as input.
- It iterates from 1 to `n/2` (inclusive) using a variable `i`.
- Inside the loop, it calculates `j` as the difference between `n` and `i`.
- It then prints the expression `i * j`, representing the decomposition of `n` into two positive integers.
- In the `main` function, we call `DecomposeToTwo` with `number` set to 8 as an example.
The function `DecomposeToTwo(8)` will output the following:
```
1 * 7
2 * 6
3 * 5
4 * 4
```
In conclusion, the `DecomposeToTwo` function takes a positive integer `n` and prints all possible ways to write `n` as a product of two positive integers.
To know more about Output visit-
brainly.com/question/14227929
#SPJ11
In Windows Server 2016, which of the following refers to the
standard installation with the GUI interface?
Group of answer choices
Windows Server 2016 with Desktop Experience
Windows Server 2016 Serve
In Windows Server 2016, the installation with the GUI interface is referred to as "Windows Server 2016 with Desktop Experience."
This installation option provides the user with a full graphical interface, which allows them to use the server's desktop environment and graphical applications. Windows Server 2016 is a server operating system that was released by Microsoft as a part of the Windows NT family of operating systems. It was designed to be used by enterprises and organizations, providing features such as virtualization, networking, security, and storage solutions.
The installation options available for Windows Server 2016 are: Windows Server 2016 Server Core: This is a minimal installation option that does not include a graphical user interface. It is designed to be used for specific server roles, such as DNS, DHCP, or file servers.
Windows Server 2016 with Desktop Experience: This is the standard installation option that includes a full graphical user interface.
To know more about installation visit:
https://brainly.com/question/32572311
#SPJ11
USING circuit maker to
Design a simple
8-bit Johnson Counter using 74ls194. The counter should count in
the following order:
00000000, 10000000,
11000000, 11100000, 11110000, 11111000, 11111100…….
CircuitMaker is a free PCB design software that allows users to create and share electronic circuit diagrams. The 74LS194 is a high-speed bipolar shift register that can be used to implement an 8-bit Johnson counter. The Johnson counter is a type of digital counter that has the unique feature of having no unused states.
To design an 8-bit Johnson counter using the 74LS194, follow these steps:
1. Open CircuitMaker and create a new project.
2. Add a 74LS194 IC to the project.
3. Connect the Vcc and GND pins of the IC to the power supply.
4. Connect the clock input (pin 1) to a clock source.
5. Connect the clear input (pin 15) to Vcc.
6. Connect the parallel load input (pin 10) to GND.
7. Connect the output enable input (pin 9) to Vcc.
8. Connect the serial input (pin 2) to the output of the last stage.
9. Connect the serial output (pin 13) to the serial input (pin 2) of the next stage.
10. Connect the Q0 output (pin 3) to the input of the first stage.
11. Connect the Q7 output (pin 12) to the output of the last stage.
The counter should count in the following order: 00000000, 10000000, 11000000, 11100000, 11110000, 11111000, 11111100, and so on.
To achieve this sequence, we need to use the parallel load input to load the counter with the initial value of 00000000. Then, we need to toggle the clock input to shift the bits to the right. When the first bit is shifted out, it needs to be fed back to the serial input, so it becomes the input for the next stage.By repeating this process, we can achieve the desired sequence of 8-bit numbers. It is important to note that the clock input needs to be high for a short period of time, so the output stabilizes before shifting the next bit.In summary, designing a simple 8-bit Johnson counter using the 74LS194 in CircuitMaker requires the proper connection of pins to the power supply, clock source, and other inputs and outputs. The parallel load input needs to be used to load the counter with the initial value, and the clock input needs to be toggled to shift the bits to the right. By repeating this process, the desired sequence of 8-bit numbers can be achieved.
To know more about design software, visit:
https://brainly.com/question/31930731
#SPJ11
Write a function, binSearch, which takes an array of integers ,
along with n, the number of elements in the array (as a size_t),
and an int to search for (target), and returns the index of the
target
Answer:
def binSearch(arr, n, target):
left = 0
right = n - 1
while left <= right:
mid = left + (right - left) // 2
if arr[mid] == target:
return mid
elif arr[mid] < target:
left = mid + 1
else:
right = mid - 1
# If the target is not found, return -1
return -1
Count the number of words and characters in a given string using
pointers.
int *WordCount(char *Text, int *size);
solve in c using function and pointer
To count the number of words and characters in a given string using pointers in C, we can write a function that takes in a character pointer to the text and an integer pointer to the size.
The function will first check if the text is NULL or empty, and if so it will return 0 for both the word count and size.
Next, we can initialize two counters - one for the number of words and one for the total size of the text. We can iterate through the text using a while loop and increment these counters as we encounter whitespace (indicating the end of a word) and non-whitespace characters (indicating a character in the text).
Finally, we can update the values of the integer pointers passed to the function with the final counts and return them. Here's the code:
#include <stdio.h>
#include <ctype.h>
int *WordCount(char *Text, int *size) {
// Check for NULL or empty input
if (Text == NULL || Text[0] == '\0') {
*size = 0;
return size;
}
int word_count = 0;
int char_count = 0;
// Iterate through text and count words and characters
while (*Text != '\0') {
// If current character is whitespace, increment word count
if (isspace(*Text)) {
word_count++;
}
// Increment character count regardless of whitespace
char_count++;
// Move pointer to next character
Text++;
}
// Increment word count for final word in text
word_count++;
// Update size pointer values and return
*size = char_count;
*(size + 1) = word_count;
return size;
}
int main() {
char text[] = "This is a test sentence.";
int counts[2] = {0};
int *results = WordCount(text, counts);
printf("Character count: %d\nWord count: %d", results[0], results[1]);
return 0;
}
In this example, we've used an array with two elements to hold the final counts. The first element holds the total character count and the second element holds the word count. We pass a pointer to this array to the WordCount function and update its values within the function. Finally, we print out the results in the main function.
learn more about string here
https://brainly.com/question/30099412
#SPJ11
