Explain why your lung capacity and breathing rate are larger when you are exercising than when you are asleep

C2H4, also known as ethylene, is a non-polar molecule because its atoms are arranged symmetrically. The two carbon atoms are at the center of the molecule and are bonded to two hydrogen atoms each. The two hydrogen atoms on one side of the molecule are identical to the two hydrogen atoms on the other side, so there is no overall dipole moment (uneven distribution of electrons) in the molecule. This means that there is no separation of electrical charge and no polar bonds, making C2H4 a non-polar molecule.

To learn more about non-polar molecule:

https://brainly.com/question/20374045

#SPJ4

Magnets on a railroad provide electricity to a train by electrifying the propulsion loops generates magnetic fields that both pull the train forward from the front and push it forward from behind.

A magnetic field is described as a vector field that describes the magnetic influence on moving electric charges, electric currents, and magnetic materials.

Electrodynamic suspension (EDS) uses superconducting electromagnets or strong permanent magnets that create a magnetic field, this  magnetic field induces currents in nearby metallic conductors when there is relative movement and hence  pushes and pulls the train towards the designed levitation position on the guide way thereby providing electricity.

Learn more about magnetic field at: https://brainly.com/question/14411049

#SPJ1

Metal X replaces Metal Y ions in a solution because it is lower in the activity series than Metal Y. It is a single displacement reaction.

Metal X is above Metal Y in the reactivity series when replacing Metal Y from its respective salts.This replacement is guaranteed since X has a greater reactivity power than Y. If it were less than Y, it wouldn't cause a reaction since it wouldn't move Y.

A single replacement reaction, also known as a single displacement reaction, occurs when one element in a molecule is swapped out for another. Starting ingredients are always pure elements combined with an aqueous compound, such as pure hydrogen gas or zinc metal. A new aqueous compound and a different pure element will be produced as products when a replacement reaction takes place. Below is a general representation of a single replacement reaction.

A+B+C→A+CB

Single displacement reaction occurs where metal X replaces metal Y ions in the solution

For more such questions on single displacement reaction, Refer:

https://brainly.com/question/7959057

#SPJ4

The standard heat of vaporization of H₂0 is +2.5 kJ/g.

The standard heat of formation  of a compound is described as the change of enthalpy during the formation of 1 mole of the substance from its constituent elements in their reference state, with all substances in their standard states.

To calculate it, we need to divide the total energy required to change the 20g of H₂0 to steam by the amount of substance being vaporized.

The amount  is 20 g

the total energy required = 50kj

Therefore the standard heat of vaporization of H₂0 is   20/50 = +2.5 kJ/g

Learn  more about  standard heat standard heat at: https://brainly.com/question/29981442

#SPJ1

Chloroform ([tex]CHCl_{3}[/tex]) is a polar molecule due to its asymmetrical shape.

The asymmetrical shape of the molecule [tex]CHCl_{3}[/tex] arises from the presence of the chlorine atom, which has a higher electronegativity than the hydrogen atoms.

This results in the chlorine atom having a partial negative charge and the hydrogen atoms having a partial positive charge.

This unequal distribution of charge gives the molecule a permanent dipole moment, making it a polar molecule and hence chloroform is not a nonpolar molecule.

Additionally, due to the large difference in electronegativity between the chlorine and hydrogen atoms, the molecule exhibits significant dipole-dipole intermolecular forces, which further reinforces its polarity.

To learn more about polar, click here:

https://brainly.com/question/30002497

#SPJ4

So, the empirical formula will be CHCl3.An ideal anesthetic was originally sought after via the use of the organic chemical chloroform.This substance has a 120.98 g/mol molar mass.

To learn more about chloroform refer

https://brainly.com/question/17380113

#SPJ4

The total relative formula ma (Mr) for CuO is 79 and H2SO4 is 98

What is relative formula mass?

The total of the relative atomic masses of the atoms represented by the numbers in the formula represents the relative formula mass of a substance composed of molecules.

Copper II sulfate is a cyan-blue chemical that is produced when copper (II) oxide, a black solid, reacts with sulfuric acid. Water and copper (II) sulfate are produced by the reaction of copper (II) oxide with sulfuric acid. This reaction can be categorized as either a neutralization reaction or a double displacement reaction.

CuO(s) + H2SO4 (aq) → CuSO4 (aq) + H2O(l)

Relative formula mass, Mr for:

CuO: 63 + 16 i.e. 79

H2SO4: 1*2 + 32 + 4*16 i.e. 98.

To learn more about relative atomic mass use link below:

https://brainly.com/question/28826089

#SPJ4

Answer:

4NaHCO3---->2Na2CO3+2CO2+2H2O

Ionic bonds are created when two oppositely charged ions are attracted to one another by electrostatic force. A chemical element is uniquely defined by its atoms, which are tiny pieces of substance.

An atom is made up of a core nucleus and one or more negatively charged electrons that orbit it. The positively charged, comparatively hefty protons and neutrons that make up the nucleus may be present. Any elementary particle of matter with at least one proton is referred to as an atom. Examples of atoms are neon (N) and hydrogen (H) (Ne). Chemistry's fundamental building component is an atom. It is the lowest fraction of substance into which electrically charged particles cannot be released. It is also the smallest piece of substance with chemical element-like characteristics.

learn more about atom  here:

https://brainly.com/question/13654549

#SPJ4

In a chemical reaction, reagents can be used to make, measure, or detect other compounds.

What are reagents in organic chemistry?

The term "reagent" in organic chemistry refers to a chemical component (a compound or combination, often composed of tiny inorganic or organic molecules) added to bring about the desired transformation of an organic substance. The Collins reagent, Fenton's reagent, and Grignard reagents are a few examples.

Reactants fluctuate during a chemical reaction, creating a variety of distinct products. While reactants are used to change compounds into new products, solvents are used to dilute solutions or dissolve soluble materials. This distinguishes solvents from reactants. 

To learn more about reagents use link below:

https://brainly.com/question/26905271

#SPJ4

Hexane is not soluble in water.

Hexane is a hydrocarbon compound and is composed of only carbon and hydrogen atoms. Hydrocarbons are nonpolar molecules, and therefore they do not interact well with polar molecules such as water. Because of this, hydrocarbons like hexane tend to be insoluble in polar solvents like water.

Water molecules are polar, which means that they have a partial negative charge on one end and a partial positive charge on the other end. Nonpolar molecules such as hexane, do not have any charges, they do not interact well with water molecules because they do not have any charges to form hydrogen bonds with water molecules.

Furthermore, Hexane is less dense than water, which means that it will float on top of water and will not mix with it.

In summary, hexane is not expected to be very soluble in water because it is a nonpolar hydrocarbon and does not have any charges to interact with the polar water molecules.

Learn more about Polar and Nonpolar Solvents here: https://brainly.com/question/29052604

#SPJ4

The benign liquid alum (aluminium sulphate) is frequently used in water treatment facilities to clear drinking water.

It has been utilised in lakes since the early 1970s to lessen the phosphorus content of the water.

Alum dissolves in water and makes the pollutants in suspension heavier, causing them to settle down more quickly. So, loading refers to the addition of alum.

The most frequent use of alum in water treatment is as coagulants. Impurities were made larger by coagulants so they would settle in the sedimentation tanks. Pathogens found in the water can be killed by alum as well.

It facilitates sludge settlement in the secondary clarifiers, which improves the efficiency of the recycled water treatment process by allowing for the passage of cleaner, less turbid water. Additionally, struvite does not accumulate inside the digesters as a result of the alum in the effluent.

To learn more about water treatment process from given link

https://brainly.com/question/20881021

#SPJ4

The pressure of a gas is the force that the gas exerts on the walls of its container.

Let’s start with the ideal gas law, PV = nRT. In this equation, ‘P’ represents atmospheric pressure, ‘V’ represents volume in liters, ‘n’ represents the number of particles in moles, ‘T’ represents temperature in Kelvin, and ‘R’ represents the ideal gas constant (0.0821 liter atmospheres per moles Kelvin). The force that a gas exerts on the walls of its container is defined as its pressure.

When you blow air into a balloon, it expands because the pressure of air molecules on the interior of the balloon is greater than on the outside. Pressure is a characteristic that governs the direction of mass flow.

To learn more about pressure of a gas to refer:

https://brainly.com/question/15110960

#SPJ1

CCl4 is a nonpolar covalent bond.

This is because the molecule has a symmetrical shape, with the four chlorine atoms arranged around the central carbon atom in a tetrahedral formation. Because the electrons are distributed evenly around the central atom, there is no partial charge on any one side of the molecule, making it nonpolar.  As a result, the electrons are evenly distributed among the atoms, resulting in no partial charges. This creates a nonpolar bond because there is no separation of charge, meaning the bond is neutral and has no dipole moment. Additionally, chlorine is more electronegative than carbon, so the electrons are pulled closer to the chlorine atoms, further contributing to the nonpolar nature of the bond.  

To learn more about nonpolar covalent:

https://brainly.com/question/12603366

#SPJ4

Volume is the amount of space an object takes up. It is typically measured using cubic units, and estimated using a variety of formulas. For example, a rectangular bathtub that is 1 foot tall, 2 feet wide, and 4 feet long will have a volume of 8 cubic feet.

Finding the volume of an object can help us to determine the amount required to fill that object, like the amount of water needed to fill a bottle, an aquarium or a water tank.

“Volume is the measure of the 3-dimensional space occupied by matter, or enclosed by a surface,” according to the National Institute of Standards and Technology’s U.S. Office of Weights and Measures. Simply stated, it is the amount of liquid or gas that will take up a defined space.

Commonly measured in cubic units, the standard unit of volume is a cubic meter. Depending on what you are measuring, you can then break it down into the smaller cubic decimeter—known as a liter—and the cubic centimeter, better known as a milliliter

Learn more about measure volume at https://brainly.com/question/28370017.

#SPJ4

[tex]NH_{3}[/tex] and [tex]BF_{3}[/tex] are both polar molecules.

This is because [tex]NH_{3}[/tex] has a net dipole moment due to its asymmetrical arrangement of electron distribution, while [tex]BF_{3}[/tex] has a non-zero dipole moment due to its trigonal planar shape.

[tex]NH_{3}[/tex] has a net positive charge at its central nitrogen atom due to the lone pair of electrons, while [tex]BF_{3}[/tex] has a net negative charge at its central boron atom due to its three bond pairs of electrons.

This difference in charge distribution of the two molecules results in a net dipole moment in each molecule.

In conclusion, [tex]NH_{3}[/tex] and [tex]BF_{3}[/tex] are both polar molecules, but [tex]NH_{3}[/tex] is more polar than [tex]BF_{3}[/tex] due to its asymmetrical electron distribution and higher dipole moment.

To learn more about polar, click here:

https://brainly.com/question/30002497

#SPJ4

To calculate the number of molecules present in 64 grammes of SO2, you first need to know the molar mass of SO2. The molar mass of SO2 is 64.06 g/mol.

Then, you can use the formula: moles = mass divided by molar mass

So, SO2 moles = 64/64.06

The molecular weight of SO2 is approximately 0.998.

Then, you can use Avogadro's number, which is 6.022 x 1023, to calculate the number of molecules:

Molecules = moles multiplied by Avogadro's number

So, molecules of SO2 = 0.998 x 6.022 x 1023

The number of molecules of SO2 present in 64 grammes is approximately 6.00 x 1023.

Note: This is an approximation because the real number of molecules present in 64 g of SO2 can be affected by experimental errors or other sources of uncertainty.

Learn more about SO2:

https://brainly.com/question/29579515

#SPJ4

The result of two or more atoms combines chemically is a molecule. A molecule can also be referred as a compound. Hence the answer to the question is Option A.

Any substance or matter that undergoes a chemical change occurring in a given reaction, especially present at the start of the reaction is called a reactant.

A substance or matter in a state in which it expands freely to fill the whole of space as in container, having no fixed shape (unlike a solid) and having no fixed volume (unlike a liquid) is called a gas.

One of a class of substances or components, that cannot be separated or divided into simpler substances by any chemical means is called an element.

A distinctly formed substance formed by chemical union of two or more ingredients/components such as atoms in definite proportion by weight is called a molecule. A molecule is a group or combined state of two or more atoms held together by chemical bonds.

A compound is a substance/matter which is formed by two or more different types of elements/atoms of elements which are united chemically in a fixed proportion.

Thus, All molecules are not compounds. But, All compounds are molecules.

Hence, the correct answer should be Option A i.e. compound.

Learn more about compound here:

https://brainly.com/question/14658388

#SPJ4

Answer:

compound

Explanation:

no.

Halogens exist in different physical states despite being in the same group because the reliance on the number of electrons. More and stronger interactions between molecules influence higher temperatures (specifically boiling points). As the atoms increase in size, they grow farther from the center point and are less attracted to it.

The balanced equation would be [tex]16Cr(s) + 3S_8(s) --- > 8Cr_2S_3 (s)[/tex].

A balanced chemical equation will have as many atoms of different elements in the products as in the reactants. In other words, a balanced chemical equation will obey the law of conservation of atoms.

According to the law of conservation of atoms, atoms can neither be created nor destroyed but can be converted from one form to another during the course of chemical reactions.

Following this law, the balanced equation for the reaction would be [tex]16Cr(s) + 3S_8(s) --- > 8Cr_2S_3 (s)[/tex]

More on balancing chemical equations can be found here: https://brainly.com/question/28294176

#SPJ1

False All the amino acid based hormones are not lipid soluble and can not cross the plasma membrane.

Amino acid-derived as well as polypeptide hormones are water-soluble and insoluble in lipids. These hormones cannot pass through the plasma membranes of the cells; therefore, their receptors are found on the surface of the target cells.

Amino acids are those molecules which will combine to form proteins.  When the proteins are digested or broken down, amino acids will be left. The human body uses amino acids to make proteins to help out the body: Repair body tissue, Grow, and Perform many other body functions.

Amino acids are also be used as a source of energy by the body.

To know more about amino acid here

https://brainly.com/question/15823799

#SPJ4

1st question : There will be 308.76 liters of H₂ in 13.75 moles. 2nd question : There will be 24.48 moles of 548 liters of O₂ .

For first part, Given we have 13.74 moles of H₂. We know its molecular mass which is 2 grams/mole. Now calculating the total mass :
⇒molecular mass x moles

⇒ 2 x 13.74

⇒27.48 grams

Now, we know that density = mass/volume, Therefore, Volume = mass/density. The density of Hydrogen gas is 0.089 g/l

∴ total mass/ density = volume

⇒27.48 grams/0.089 g/l

⇒308.76 liters

For 2nd part, We can calculate total mass of Oxygen gas by the same density formula which is mass = density x volume. The density of oxygen gas is 1.43 g/l. Therefore,

⇒1.43 x 548

⇒783.64 grams

Now, we can calculate moles by dividing total mass by molecular mas (molecular mass of oxygen gas is 32 grams/mole)

⇒ 783.64/32

⇒24.48 moles

Learn more about Calculating moles here,

https://brainly.com/question/21085277

Answer:

Pretty sure it's A

Explanation:

By optimizing the energy use of cloud computing, businesses can save money on their energy bill and reduce their carbon footprint.

Cloud computing is becoming increasingly popular due to its cost-effectiveness and scalability, but it comes with a cost: energy.

As businesses continue to invest in cloud computing, it is important to understand the need for energy efficiency and the ways this can be achieved.

Furthermore, the most efficient cloud computing systems are more reliable and resilient, making them ideal for businesses that rely on cloud-based services. Investing in energy efficient cloud computing not only saves money, but also helps the environment.

To ensure cloud computing remains a viable long-term solution for businesses, it’s essential for companies to take steps to ensure their cloud infrastructure is energy efficient.

To learn more about energy, click here:

https://brainly.com/question/1932868

#SPJ4

Answer:

Molar mass is the mass of a substance that has 6.022 × 1023 atoms

360 moles of NaOH are needed to make with 45 120 mL of 15% solution.

The term mole is defined as one mole of any substance is exactly equal to its atomic mass or molecular mass. It is expressed in grams.

The mole is also define as the amount of substance of a system which contains as many elementary entities. 1 mole = 6.023 X 10²³

Multiply the molarity by the volume of solution to get the number of moles of solute.

moles of solute = molarity × volume of solution

= 45 × 120 / 15

= 360 moles.

Thus, 360 moles of NaOH are needed to make with 45 120 mL of 15%  solution.

To learn more about the mole, follow the link;

https://brainly.com/question/26416088

#SPJ1

Answer:

atomic number

Explanation:

# of protons

Answer:

The temperature is kept constant. What new volume does the gas occupy? Two hundred liters of gas at zero degrees Celsius are kept under a pressure of 150 kPa.

Explanation:

Oxygen gas is at a temperature of 40°C when it occupies a volume of 2.3 liters. 

Answer: #1 is the awnser

Explanation: trus me