Fill in the information missing from this table.​

The reactant CO must have the coefficient and CO2 is a product and has the coefficient 2 are the options to identify the correct coefficients required to balance the reaction.

Equal numbers and types of each atom appear on both sides of balanced chemical equations. A balanced equation must have coefficients that are the simplest whole number ratio. Chemical reactions always conserve mass. In order to make a chemical equation equal in both reactants and products, add coefficients where necessary in front of the symbols or formulations. Count the atoms on each side first. Next, alter one of the compounds' coefficient. Third, count the atoms once more, and then repeat steps two and three until the equation is balanced.

To learn more about reactants click here https://brainly.com/question/17096236

#SPJ4

Organic product A is a five-carbon chain, pentane, which can be drawn as CH3CH2CHCHCH3.

Organic products are foods and other items that are produced without the use of synthetic chemicals, hormones, antibiotics, or genetic engineering. Organic products are grown without conventional pesticides and fertilizers, and are processed without artificial ingredients, preservatives, or irradiation. Organic products are usually more expensive than conventional products, but they are healthier for the environment, animals, and humans.

Organic product B is a four-carbon chain, propene, which can be drawn as CH3CH2CHCH3. The structural formulas for the two products can be drawn as follows:

A CH3CH2CHCHCH3

B CH3CH2CHCH3

To know more about organic product click- https://brainly.com/question/1594044

#SPJ4

In the investigation, the amount of vinegar is held constant and the amount of baking soda can be varied. Both reacts together to form carbon dioxide gas that is appearing as bubbles.

In a scientific investigation, there are two types of investigations namely, dependent variables and independent variables. Dependent variables are dependent on the independent variables which is changed.

The variable which we can change is the independent variable. In the given investigation, the independent variable is the amount of baking soda which we can change where, amount of vinegar is held constant.

The gas bubbles formed there is carbon dioxide. The amount of bubbles formed depends on the amount of baking soda.

Find more on dependent variables;

https://brainly.com/question/967776

#SPJ1

A renewable fuel known as "biomass" is ethanol, which is produced from various plant sources

[tex]$$\mathrm{C}_2 \mathrm{H}_5 \mathrm{OH}+\mathrm{CH}_3 \mathrm{COOH} \rightarrow \mathrm{CH}_3 \mathrm{COOC}_2 \mathrm{H}_5+\mathrm{H}_2 \mathrm{O}$$[/tex]

[tex]1 mole $\mathrm{C}_2 \mathrm{H}_5 \mathrm{OH}$ gives 1 moles $\mathrm{CH}_3 \mathrm{COOC}_2 \mathrm{H}_5$[/tex]

[tex]$44 \mathrm{gC}_2 \mathrm{H}_5 \mathrm{OH}$[/tex] gives [tex]$88 \mathrm{~g} \mathrm{CH}_3 \mathrm{COOC}_2 \mathrm{H}_5$[/tex]

[tex]$23 \mathrm{gC}_2 \mathrm{H}_5 \mathrm{OH}$[/tex] gives[tex]$44 \mathrm{~g} \mathrm{CH}_3 \mathrm{COOC}_2 \mathrm{H}_5$[/tex]

Yield [tex]$\frac{44}{44} \times 100$[/tex]

To learn more about ethanol refer to:

https://brainly.com/question/5750283

#SPJ1

When 125 ml of 0.150 M AgNO₃ are mixed with 95.0 ml of 0.212 M K₂CrO₄, assuming a complete reaction, the mass of the precipitate Ag₂CrO₄ is 0.827 grams.

The reaction between AgNO3 and K2CrO4 is:

Ag₂CrO₄(aq) + K₂CrO₄(aq) ->Ag₂CrO₄(s) + 2KNO₃(aq)

In order to calculate the mass of the precipitate, Ag₂CrO₄, we need to use the stoichiometry of the reaction and the concentrations of the reactants.

The balanced equation tells us that 1 mole of AgNO₃ reacts with 1 mole of K₂CrO₄ to produce 1 mole of Ag₂CrO₄ precipitate.

We can use the volumes and concentrations of the solutions to calculate the number of moles of each reactant:

0.125 L of 0.150 M AgNO₃ = 0.0188 moles AgNO₃

0.095 L of 0.212 M K₂CrO₄ = 0.0199 moles K₂CrO₄

Since the reaction is stoichiometric, we can assume that the number of moles of AgNO₃ and K₂CrO₄ is equal, therefore the number of moles of Ag₂CrO₄ precipitate is also 0.0188 moles.

We can use the molar mass of Ag₂CrO₄ (441.98 g/mol) to convert the number of moles to mass

0.0188 moles Ag₂CrO₄ x 441.98 g/mol = 0.827 g Ag2CrO4

In conclusion, when 125 ml of 0.150 M AgNO₃ are mixed with 95.0 ml of 0.212 M K₂CrO₄, assuming a complete reaction, the mass of the precipitate Ag₂CrO₄ is 0.827 grams. This is calculated by using the stoichiometry of the reaction, the concentrations of the reactants, and the molar mass of Ag₂CrO₄.

Learn more about precipitate at

brainly.com/question/29031056

#SPJ4

Option (d) is correct.  Liquid F2 has weak dispersion force attractions between its molecules whereas liquid HF has both weak dispersion force attractions and hydrogen bonding interactions between its molecules.

Dispersion forces are the temporary attraction between two adjacent atoms. Electrons are unsymmetrical which creates a temporary dipole. This dipole causes an induced dipole in the other atom which leads to the attraction between the two. The high boiling point of HF is not attributable to the dispersion forces. In HF, a stronger attraction present is hydrogen bonding. The strength of dispersion forces is proportional to the polarizability of the molecule.  The more polarized the stronger is the forces.

To learn more about Dispersion forces please visit:

https://brainly.com/question/12625570

#SPJ4

The complete question is:

The electron cloud of HF is smaller than that of F2, however, HF has a much higher boiling point than F2 has. Which of the following explains how the dispersion-force model of intermolecular attraction does not account for the unusually high boiling point of HF?

A. F2 is soluble in water, whereas HF is insoluble in water.

B. The F2 molecule has a greater mass than the HF molecule has.

C. Liquid F2 has weak dispersion force attractions between its molecules, whereas liquid HF has strong ionic interactions between H+ and F- ions.

D. Liquid F2 has weak dispersion force attractions between its molecules, whereas liquid HF has both weak dispersion force attractions and hydrogen bonding interactions between its molecules.

The addition of an aqueous solution with a pH less than 7 to sodium bicarbonate causes bubbling is chemical change. I'm frying an egg is chemical. The reduction in vapor pressure caused by the addition of salt to a liquid is physical change.

Combination of yellow and blue paint to create a green paint is  chemical. Formation of solid after reagent combination is chemical. Crystal formation upon solution formation is physical. Melting point is a physical property, as it refers to the temperature at which a substance changes from a solid to a liquid state. The addition of an aqueous solution with a pH less than 7 to sodium bicarbonate causes bubbling.. This is a chemical change as a new substance is formed (carbon dioxide gas) and the bubbling is due to the release of CO2 gas.Cooking an egg. This is a chemical change as the proteins in the egg change structure and form new compounds The lowering of vapor pressure after salt is added to a liquid, this is a physical change because it is a change in the physical properties of the liquid. Combination of yellow and blue paint to create a green paint is a chemical change.

Learn more about compound here:

https://brainly.com/question/3648919

#SPJ4

When tin is mixed with chlorine, a synthesis reaction occurs and the product of this reaction is SnCl₄ which is denoted as option C.

This is referred to as a reaction that occur when two different atoms or molecules interact to form a different molecule or compound under certain conditions.

In this scenario, we were told that the reactants are tin and chlorine and we can deduce that they react to form tin (IV) chloride which is denoted as SnCl₄ and the equation of the reaction can be seen below thereby making it the correct choice.

Sn + 2Cl₂ -> SnCl₄

Read more about Synthesis reaction here https://brainly.com/question/16281119

#SPJ1

The speed at which a solute will move through a solution is determined by its diffusion rate. Diffusion is the movement of molecules or ions from an area of high concentration to an area of low concentration.

The diffusion rate of a solute is directly proportional to its concentration gradient, and inversely proportional to its size and charge.In the given options, O albumin, O urea, O glucose and O sodium chloride, Sodium chloride (NaCl) would move the fastest because it is an ionic compound, which means it has a charge and thus it is smaller in size than the other options which are organic molecules, thus it can diffuse faster through the solution.O albumin and O urea are large organic molecules and have a low diffusion rate. O glucose is a smaller molecule but still larger than NaCl and its diffusion rate would be slower than NaCl

To learn more about diffusion here:

https://brainly.com/question/24746577

#SPJ4

Yes, they risk their percentage water being too high.

The hydrate might absorb air moisture that would cause a higher percentage calculation of water.

If the lab group only heats the hydrate for 5 minutes instead of 10 minutes, they risk their percentage water calculation being too high. This is because when heating a hydrate, the water molecules are removed from the crystal structure, and if the heating is not done for long enough, not all of the water molecules will have been removed, resulting in a higher percentage of water calculated.

If a lab group delays weighing after heating, several things could happen that would throw off the results. One possibility is that the hydrate could absorb moisture from the air, which would result in a higher percentage of water calculated. Additionally, if the contents of the evaporating dish are not properly sealed, there is a risk of evaporation of the remaining water which would result in a lower percentage of water calculated. In addition, the hydrate could become contaminated with other substances, which would also result in inaccurate results

Learn more on percentage calculation of water here: https://brainly.com/question/2426547

#SPJ1

a lab student do to response should be,  If doing so does not cause a delay in the evacuation, leave the room while removing your personal things. Observe the TA's and the lab staff's instructions.

Notify the emergency personnel of any other residents who require help leaving. Close the doors, leave the area, and dial 9-1-1 from a secure location. student can do the experiments they have learnt about in textbooks or from their professors in a scientific lab. They have a better understanding of an experiment's methodology and potential outcomes in this way. a location outfitted for scientific experimentation or for testing and analysis. a research centre. A location that allows for experimentation, observation, or practise in a particular field of study. The abbreviation lab comes from the mediaeval Latin word laboratorium.

learn more about student  here:

https://brainly.com/question/9026556

#SPJ4

A neutral atom has 42 protons and 56 neutrons mean it has no charge. The atom is Molybdenum (Mo) with atomic no. 42. And mass no. 98 in period 5 and group 6 of the periodic table.

Let us first understand the question. So the general representation of an atom that is equal to AZ X, where X is the atomic symbol of the element, A is the mass number and Z is the atomic number. Since we know that the number of protons is equal to the no. of electrons which is equal to the atomic number.  Also, we know that Mass no. is equal to the sum of Protons and Neutrons. This allows, us to find the atom in the periodic table with atomic no. 42 and mass no. 98 which is Molybdenum in period 5 and group 6 of the table.

Learn more about atoms here:

https://brainly.com/question/13654549

#SPJ4

The pure substances melts over the narrow temperature range. The pure substances are the single element or the compound.

a) Mixtures melt at a "lower temperature" than the pure components and over the "greater" temperature range.

b)If the mixture of the unknown with aspirin shows "no depression or the expansion" of the melting point then the unknown is aspirin.

c) If the mixture of the unknown with urea shows "no depression or the expansion" of melting point then the unknown is urea.

The melting point is the temperature of the substance at which it starts changes it sate from the solid to a liquid.

To learn more about melting point here

https://brainly.com/question/24076347

#SPJ4

Our current understanding of the atom is based on Dalton's early 19th-century idea of atomism, which was developed through meteorological investigations. John Dalton is well recognised for developing the atomism hypothesis.

When British chemist John Dalton realised that compounds usually had whole number ratios of atoms, he provided the first modern proof for the existence of atoms. Because of this, it's H2O rather than H20. A novel state of matter has been demonstrated by scientists: an electron circles a nucleus at a considerable distance while being bonded to several other atoms inside the orbit. The Bose-Einstein condensate's electron (blue) orbits the nucleus (red), and the orbit encompasses a large number of other atoms (green). Chemistry's fundamental building component is an atom. It is the lowest fraction of substance into which electrically charged particles cannot be released.

learn more about atoms here:

https://brainly.com/question/13654549

#SPJ4

The atomic numbers of the elements are listed in the long form periodic table. The quantity of protons in the nucleus of an element's atom is represented by the element's atomic number.

To learn more about atomic number refer to:

https://brainly.com/question/11353462

#SPJ4

The freezing point depression of a solution is directly proportional to the molality of the solute. The freezing point depression of a solution is given by the equation ΔTf = Kf * molality, where ΔTf is the change in freezing point, Kf is the freezing point depression constant of the solvent and molality is the concentration of the solute.

We know that the solid depressed the freezing point of stearic acid (Kf =4.5 °C/molal) by 3.5 °C, and that the same solid was dissolved in water (Kf = 1.86 C/molal) to the same final molality as it had in the stearic acid.

Thus, we can say that the final molality of the solid = 3.5 / 4.5 = 0.777 mol/kg

Now we need to find the freezing point depression for the same solution in water, so we use the freezing point depression constant of water (Kf = 1.86 C/molal) and the final molality of the solid in water

ΔTf = Kf * molality

ΔTf = 1.86 * 0.777 = 1.44 C

So the change in freezing point would be 1.44 C.

The cyclobutene's carbon atoms are all hybridized in the sp3 sp3 state, with the second and third carbon atoms also being in the sp state.

To learn more about hybridization refer to:

https://brainly.com/question/28468454

#SPJ4

The systematic name for CuSO4 is copper(II) sulfate, but it is also referred to as blue vitriol, Roman vitriol, the vitriol of copper, and bluestone.

Define CuSO4?

To learn more about  copper refers to:

https://brainly.com/question/29000726

#SPJ1

The reaction that can be used to extract copper metal from copper sulfate solution would be equation 2.

Iron molecules will displace copper from CuSO4 because it is more reactive than it. This shows that Iron is more reactive than Copper and comes above Cu in the reactivity series.

Even though Sodium will displace Copper from CuSO4, equation 1 will result in the formation of Cu(OH)2 instead of free copper because it is a double displacement reaction.

A double-displacement reaction takes place when the positive and negative ions of two ionic compounds exchange positions to create two completely different compounds in a liquid solution. These substances can be precipitates, gases, or other molecular substances.

Reactivity series is a list of elements that are arranged in such an order that shows the elements from being most reactive to least reactive.

Learn more about displacement reaction here:

https://brainly.com/question/29307794

#SPJ4

The complete question is-

The reactants of two chemical equations are listed.

Equation 1: CuSO4 and NaOH

Equation 2: Fe and CuSO4

Based on the type of reaction, which reaction can be used to extract copper metal from copper sulfate solution?

A - Equation 2, because Fe being more reactive, replaces Cu from CuSO4

B - Equation 2, because Fe being more reactive, replaces S from CuSO4

C - Equation 1, because Na being more reactive, exchanges position with Cu in CuSO4

D - Equation 1, because Na being more reactive, exchanges position with S in CuSO4

The alkyl groups in secondary and tertiary alcohols make the nucleophilic assault challenging and provide a steric hindrance. Therefore, elimination to produce an alkene is preferred to substitution to produce an ether.

Therefore, acid dehydration of secondary or tertiary alcohols is an inappropriate approach for producing ethers. Acid dehydration results in the formation of ethers via the SN2 pathway (from primary alcohols). Due to steric hindrance, alkenes rather than ethers develop when secondary or tertiary alcohols are utilized. One alcohol is protonated in the first stage of the reaction process to provide a strong leaving group. In the subsequent step, a second alcohol undergoes an SN2 reaction with the protonated alcohol to remove water, resulting in a protonated ether. This intermediate is deprotonated to produce in the final step.

Learn more about its tertiary here:-

https://brainly.com/question/30099945

#SPJ4

A precipitate is formed when HgCl₂ and NH₃ are mixed a precipitate of HgClNH₂ is formed which has low solubility.

Solubility is defined as the ability of a substance which is basically solute to form a solution with another substance. There is an extent to which a substance is soluble in a particular solvent. This is generally measured as the concentration of a solute present in a saturated solution.

The solubility mainly depends on the composition of solute and solvent ,its pH and presence of other dissolved substance. It is also dependent on temperature and pressure which is maintained.Concept of solubility is not valid for chemical reactions which are irreversible. The dependency of solubility on various factors is due to interactions between the particles, molecule or ions.

Learn more about solubility,here:

https://brainly.com/question/29857840

#SPJ1

The rate of reaction in a chemical reaction is the speed at which the products are formed from the reactants. It offers some insight into the potential reaction time.

For instance, the combustion of cellulose in fire responds incredibly quickly and is complete in a split second.

H2(g)+2ICl(g) → 2HCl(g)+I2(g)

Rate of reaction  = reactant used/Time taken to consume of the reactant

rate=k[HI][ICl]

The rate of reaction, also known as reaction rate, is the rate at which reactants transform into products. It should go without saying that different chemical reactions occur at different rates. While some chemical reactions happen extremely immediately, others may take some time to reach their final equilibrium.

To learn more about reactant click here https://brainly.com/question/17096236

#SPJ4

complete question: Step 1:H2(g)+ICl(g)→HI(g)+HCl(g)(slow). Step 2 : HI(g)+ICl(g)→HCl(g)+I2(g)(fast). The reaction is carried out at constant temperature inside a rigid container. Based on this mechanism, which of the following is the most likely reason for the different rates of step 1 and step 2 ?

An ion is an electrically charged particle that is created by either taking electrons from a neutral atom to create a positive ion or adding electrons to a neutral atom to create a negative ion.

The ions of the subsequent electrolytes Include the right charges and the appropriate number of each ion, which are as follows: (a) CaF2 dissociated into 3 ions, one Ca++ and two F - (b) NH4Cl dissociated into 2 ions, one NH4+ and one Cl- (c) Na3PO4 dissociated into 4 ions, three Na+ and one (PO4)—

Ions are atoms or molecules with a net electrical charge (/a. n, -n/). Conventionally, a proton's charge is thought to be positive, while an electron's charge is thought to be negative, making them equal and opposing charges.

Learn more about ions from here:

https://brainly.com/question/29183072

#SPJ4

An ionic compound with at least four ions i.e. Fe3+ ; NO3- ; NH4+ ; CN- has the empirical formula as  

Fe(CN)₆³⁻ ; Fe(NO3)³ ; NH₄NO₃ ; (NH₄)2Fe(CN)₆, respectively.

1.  Fe3+ :-  The empirical formula for this ionic compound is Fe(CN)₆³⁻. Iron(III) ions (Fe3+) and cyanide ions combine to form it (CN-).

2. NO3- :- Fe is the empirical formula for this ionic molecule (NO3)³. It is produced when iron(III) ions (Fe3+) and nitrate ions interact with (NO3-).

3. NH4+ :- This ionic compound's empirical formula is NH₄NO₃. It is made up of nitrate ions and ammonium ions (NH4+) (NO3-).

4. CN- :- The empirical formula of this ionic molecule is (NH₄)2Fe(CN)₆, which is composed of ammonium ions (NH4+), iron(III) ions (Fe3+), and cyanide ions (CN-).

The empirical formula is the most straight forward whole-number ratio of the atoms in a compound, but the molecular formulas may be different. Additionally, depending on the environment, these molecules can exist in a variety of forms. Fe(CN)6 can exist in a variety of forms depending on the pH of the solution, whereas NH4NO3 can either exist as a salt or a nitrate ester.

To know more about compound please refer: https://brainly.com/question/13516179

#SPJ4

The tire pressure (dependent variable) increases as the temperature increases (independent variable).

The two most important variables in a science experiment are independent and dependent variables.

The variable that the experimenter controls are the independent variable. The variable that adapts to the independent variable is known as the dependent variable. The two factors could be connected through cause and effect.

In an experiment, the dependent variable depends on the changes that occur in the independent variable.

Learn more about independent and dependent variables at: https://brainly.com/question/82796

#SPJ1

Naming of the following compound is given below.
What is chemical compound?
A chemical compound is a substance composed of two or more elements in a fixed ratio. Chemical compounds can be formed when atoms of two or more elements combine chemically. Examples of chemical compounds include water (H2O), table salt (NaCl), and carbon dioxide (CO2). Compounds are usually identified by their chemical formula, which describes the ratio of atoms present.

2,5-Dibromobenzene: A compound composed of six carbon atoms arranged in a ring structure, with two bromine atoms bonded to the two carbon atoms in the center of the ring.

3,6-Dibromobenzene: A compound composed of six carbon atoms arranged in a ring structure, with two bromine atoms bonded to the two carbon atoms at either end of the ring.

1,4-Dibromobenzene: A compound composed of six carbon atoms arranged in a ring structure, with two bromine atoms bonded to the two carbon atoms located adjacent to each other in the center of the ring.

2,5-Dibromocyclohexene: A compound composed of six carbon atoms arranged in a ring structure, with two bromine atoms bonded to the two carbon atoms located across from each other in the middle of the ring.

1,4-Bromocyclohexene: A compound composed of six carbon atoms arranged in a ring structure, with one bromine atom bonded to the two carbon atoms located adjacent to each other in the center of the ring.

To know more about chemical compound click-
https://brainly.com/question/26487468
#SPJ4

The combustion of methane is an illustration of a simpler chemical transformation. Natural gas, the primary fuel used in many residential furnaces, is primarily composed of methane.

To learn more about chemical transformation refer to:

https://brainly.com/question/2667612

#SPJ4

The term or terms that could be used to describe this sample of smoke are "mixture" and "heterogeneous mixture".

A mixture is a combination of two or more substances in which each substance retains its own chemical properties and can be separated by physical means, such as filtering or distillation. A heterogeneous mixture is a type of mixture in which the different components can be easily seen or distinguished and are not evenly distributed throughout the mixture.

In this case, the dust particles and gases are different substances that can be distinguished and are not evenly distributed throughout the sample, therefore it is a heterogeneous mixture.

To know more about compound

https://brainly.com/question/13516179

#SPJ4

The boiling points of sulfur based derivatives if their boiling points are about the same.

What is boiling point?

When a liquid's vapor pressure equals that of the gas above it, that liquid has reached its boiling point. When a liquid's vapor pressure reaches one atmosphere, it is said to have reached its usual boiling point (760 torr). a microscopic image of a bubble in boiling water.

What is sulfur?

Non-metallic chemical element utilized mostly in the form of sulfuric acid to extract phosphates from ores. It is a vital component of all life and shares many chemical characteristics with oxygen.

Therefore, boiling points of sulfur based derivatives if their boiling points are about the same.

Learn more about boiling point from the given link.

https://brainly.com/question/40140

#SPJ4