The equation of the tangent plane is z = -y.The normal vector of the plane is given by (-1, 1, 1, cos(0, 1, 0)) and a point on the plane is (0, 1, 0).The equation of the tangent plane is thus -x + z = 0.
The surface is given by the equation:x + y + z - cos(xyz) = 0
Differentiate the equation partially with respect to x, y and z to obtain:
1 - yz sin(xyz) = 0........(1)
1 - xz sin(xyz) = 0........(2)
1 - xy sin(xyz) = 0........(3)
Substituting the given point (0,1,0) in equation (1), we get:
1 - 0 sin(0) = 1
Substituting the given point (0,1,0) in equation (2), we get:1 - 0 sin(0) = 1
Substituting the given point (0,1,0) in equation (3), we get:1 - 0 sin(0) = 1
Hence the point (0, 1, 0) lies on the surface.
Thus, the normal vector of the tangent plane is given by the gradient of the surface at this point:
∇f(0, 1, 0) = (-1, 1, 1, cos(0, 1, 0)) = (-1, 1, 1, 1)
The equation of the tangent plane is thus:
-x + y + z - (-1)(x - 0) + (1 - 1)(y - 1) + (1 - 0)(z - 0) = 0-x + y + z + 1 = 0Orz = -x + 1 - y, which is the required equation.
Given the surface, x + y + z - cos(xyz) = 0, we need to find the equation of the tangent plane at the point (0,1,0).
The first step is to differentiate the surface equation partially with respect to x, y, and z.
This gives us equations (1), (2), and (3) as above.Substituting the given point (0,1,0) into equations (1), (2), and (3), we get 1 in each case.
This implies that the given point lies on the surface.
Thus, the normal vector of the tangent plane is given by the gradient of the surface at this point, which is (-1, 1, 1, cos(0, 1, 0)) = (-1, 1, 1, 1).A point on the plane is given by the given point, (0,1,0).
Using the normal vector and a point on the plane, we can obtain the equation of the tangent plane by the formula for a plane, which is given by (-x + y + z - d = 0).
The equation is thus -x + y + z + 1 = 0, or z = -x + 1 - y, which is the required equation.
To learrn more about normal vector
https://brainly.com/question/31832086
#SPJ11
Treasure Mountain International School in Park City, Utah, is a public middle school interested in raising money for next year's Sundance Film Festival. If the school raises $16,500 and invests it for 1 year at 6% interest compounded annually, what is the APY earned? (Use the Table provided.) Note: Do not round intermediate calculations. Round your answer to the nearest whole percent.
Round the answer to the nearest whole percent: Rounding 6.2% to the nearest whole percent gives 6%. Therefore, the APY earned by the school in one year is 6%.Hence, the correct option is A. 6%.
Given; Treasure Mountain International School in Park City, Utah, is a public middle school interested in raising money for next year's Sundance Film Festival.
If the school raises $16,500 and invests it for 1 year at 6% interest compounded annually,
The total APY earned by the school in one year is 6.2%.
The APY is calculated by using the following formula: APY = (1 + r/n)ⁿ - 1Where,r is the stated annual interest rate. n is the number of times interest is compounded per year.
So, in this case; r = 6% n = 1APY = (1 + r/n)ⁿ - 1APY = (1 + 6%/1)¹ - 1APY = (1.06)¹ - 1APY = 0.06 or 6%
The APY earned by the school is 6% or 0.06.
Round the answer to the nearest whole percent: Rounding 6.2% to the nearest whole percent gives 6%. Therefore, the APY earned by the school in one year is 6%.Hence, the correct option is A. 6%.
Know more about nearest whole percent here:
https://brainly.com/question/29193588
#SPJ11
How many 4-digit number can be formed from digits 0 through 9 if
no digit can be repeated and the number should contain digits 2 and
6.
Therefore, there are 112 different 4-digit numbers that can be formed using digits 0 through 9, with no repeated digits, and containing digits 2 and 6.
To form a 4-digit number using digits 0 through 9, with no repeated digits and the number must contain digits 2 and 6, we can break down the problem into several steps:
Step 1: Choose the position for digit 2. Since the number must contain digit 2, there is only one option for this position.
Step 2: Choose the position for digit 6. Since the number must contain digit 6, there is only one option for this position.
Step 3: Choose the remaining two positions for the other digits. There are 8 digits left to choose from (0, 1, 3, 4, 5, 7, 8, 9), and we need to select 2 digits without repetition. The number of ways to do this is given by the combination formula, which is denoted as C(n, r). In this case, n = 8 (number of available digits) and r = 2 (number of positions to fill). Therefore, the number of ways to choose the remaining two digits is C(8, 2).
Step 4: Arrange the chosen digits in the selected positions. Since each position can only be occupied by one digit, the number of ways to arrange the digits is 2!.
Putting it all together, the total number of 4-digit numbers that can be formed is:
1 * 1 * C(8, 2) * 2!
Calculating this, we have:
1 * 1 * (8! / (2! * (8-2)!)) * 2!
Simplifying further:
1 * 1 * (8 * 7 / 2) * 2
Which gives us:
1 * 1 * 28 * 2 = 56 * 2 = 112
Learn more about digits here
https://brainly.com/question/30142622
#SPJ11
A system of ODEs is said to be autonomous if the right hand side is independent of t; i.e. dtdu=f(u). Suppose that f is Lipschitz continuous in a closed neighborhood B in the u - space and that v(t) and w(t) are two solutions with values in the interior of B. If v(t1)=w(t2) for some t1 and t2, prove that v(t)=w(t+t2−t1). Hint: Use the existence and uniqueness theorem for 1st ODEs.
If v(t1) = w(t2) for solutions v(t) and w(t) of an autonomous system of ODEs, then v(t) = w(t + t2 - t1). This result follows from the existence and uniqueness theorem for first-order ODEs and the assumption of Lipschitz continuity of f(u) in the closed neighborhood B.
To prove that v(t) = w(t + t2 - t1), we'll make use of the existence and uniqueness theorem for first-order ordinary differential equations (ODEs) along with Lipschitz continuity.
The system of ODEs is autonomous, so dt/du = f(u).
f is Lipschitz continuous in a closed neighborhood B in the u-space.
v(t) and w(t) are two solutions with values in the interior of B.
v(t1) = w(t2) for some t1 and t2.
We'll proceed with the following steps:
Define a new function g(t) = v(t + t2 - t1).
Differentiate g(t) with respect to t using the chain rule:
g'(t) = d/dt[v(t + t2 - t1)]
= dv/dt(t + t2 - t1) [using the chain rule]
= dv/dt.
Consider the function h(t) = w(t) - g(t).
Differentiate h(t) with respect to t:
h'(t) = dw/dt - g'(t)
= dw/dt - dv/dt.
Show that h'(t) = 0 for all t.
Using the given conditions, we can apply the existence and uniqueness theorem for first-order ODEs, which guarantees a unique solution for a given initial condition. Since v(t) and w(t) are solutions to the ODEs with the same initial condition, their derivatives with respect to t are the same, i.e., dv/dt = dw/dt. Therefore, h'(t) = 0.
Integrate h'(t) = 0 with respect to t:
∫h'(t) dt = ∫0 dt
h(t) = c, where c is a constant.
Determine the constant c by using the given condition v(t1) = w(t2):
h(t1) = w(t1) - g(t1)
= w(t1) - v(t1 + t2 - t1)
= w(t1) - v(t2).
Since h(t1) = c, we have c = w(t1) - v(t2).
Substitute the constant c back into h(t):
h(t) = w(t1) - v(t2).
Simplify the expression for h(t) by replacing t1 with t and t2 with t + t2 - t1:
h(t) = w(t1) - v(t2)
= w(t) - v(t + t2 - t1).
Conclude that h(t) = 0, which implies w(t) - v(t + t2 - t1) = 0.
Therefore, v(t) = w(t + t2 - t1), as desired.
By following these steps and utilizing the existence and uniqueness theorem for first-order ODEs, we have proven that v(t) = w(t + t2 - t1) when v(t1) = w(t2) for some t1 and t2.
To learn more about ordinary differential equations (ODEs) visit : https://brainly.com/question/28099315
#SPJ11
Ifq= sin(2p+3r)/pr ,∂q/∂p is equal to?
∂q/∂p is equal to [2cos(2p+3r)pr - rsin(2p+3r)] / (pr)^2.
The partial derivative of the function q, which is equal to sin(2p+3r)/pr, with respect to p can be determined using the quotient rule.
To find ∂q/∂p, we can use the quotient rule for differentiation. The quotient rule states that for a function of the form f(x) = g(x)/h(x), the derivative of f(x) with respect to x is given by [g'(x)h(x) - g(x)h'(x)] / [h(x)]^2.
In our case, q(p, r) = sin(2p+3r)/pr, where p and r are variables. Applying the quotient rule, we have:
∂q/∂p = [(cos(2p+3r) * (2)) * (pr) - (sin(2p+3r) * (r))] / (pr)^2
Simplifying further:
∂q/∂p = [2cos(2p+3r)pr - rsin(2p+3r)] / (pr)^2
Therefore, ∂q/∂p is equal to [2cos(2p+3r)pr - rsin(2p+3r)] / (pr)^2.
For more information on partial derivatives visit: brainly.com/question/28750217
#SPJ11
If the radiu of a circle i 4 and the cale factor i. 75 what it the new circle coordinate
If the radius of a circle is 4 and the scale factor is 0.75, the new circle coordinates will remain unchanged. The new circle will have a radius of 3, but the center point will stay the same.
To find the new coordinates of the circle after applying a scale factor, we need to multiply the radius of the original circle by the scale factor. In this case, the radius of the original circle is 4, and the scale factor is 0.75.
To find the new radius, we multiply 4 by 0.75, which gives us 3.
The coordinates of a circle represent the center point of the circle. Since the scale factor only affects the radius, the center point remains the same. Therefore, the new circle coordinates will be the same as the original coordinates.
In conclusion, if the radius of a circle is 4 and the scale factor is 0.75, the new circle coordinates will remain unchanged. The new circle will have a radius of 3, but the center point will stay the same.
to learn more about radius
https://brainly.com/question/13449316
#SPJ11
A hemispherical bowl has top radius 9{ft} and at time {t}=0 is full of water. At 1:00 P.M. a circular hole of unknown radius r is opened, and at 1:30 P.M. the depth of
A hemispherical bowl has top radius 9ft,At time t=0, the bowl is full of water. A circular hole of unknown radius r is opened at 1:00 PM. The depth of the water in the bowl is 4ft at 1:30 PM. The radius of the hole r is approximately 2.1557 ft. Answer: r ≈ 2.1557 ft.
Step 1: Volume of the hemispherical bowl: We know that the volume of a hemisphere is given by: V = (2/3)πr³Here, radius r = 9ft.Volume of the hemisphere bowl = (2/3) x π x 9³= 2,138.18 ft³.
Step 2: Volume of water in the bowl: When the bowl is full, the volume of water is equal to the volume of the hemisphere bowl. Volume of water = 2,138.18 ft³.
Step 3: At 1:30 PM, the depth of water in the bowl is 4 ft. Let h be the depth of the water at time t. Volume of the water at time t, V = (1/3)πh²(3r-h)The total volume of the water that comes out of the hole in 30 minutes is given by: V = 30 x A x r Where A is the area of the hole and r is the radius of the hole.
Step 4: Equate both volumes: Volume of water at time t = Total volume of the water that comes out of the hole in 30 minutes(1/3)πh²(3r-h) = 30 x A x r(1/3)π(4²) (3r-4) = 30 x πr²(1/3)(16)(3r-4) = 30r²4(3r-4) = 30r²3r² - 10r - 8 = 0r = (-b ± √(b² - 4ac))/2a (use quadratic formula)r = (-(-10) ± √((-10)² - 4(3)(-8)))/2(3)r ≈ 2.1557 or r ≈ -0.8224.
Let's learn more about hemisphere:
https://brainly.com/question/12754795
#SPJ11
It takes Boeing 28,718 hours to produce the fifth 787 jet. The learning factor is 80%. Time required for the production of the eleventh 787 : 11th unit time hours (round your response to the nearest whole
Rounding the response to the nearest whole, the time required for the production of the eleventh 787 jet is approximately 51,529 hours.
To calculate the time required for the production of the eleventh 787 jet, we can use the learning curve concept. The learning curve states that as cumulative production doubles, the average time per unit decreases by a constant percentage, which is referred to as the learning factor.
In this case, the learning factor is given as 80%, which means that every time the cumulative production doubles, the time required per unit decreases by 80%.
To find the time required for the eleventh unit, we need to determine the cumulative production when the eleventh unit is being produced. Since we know the time required for the fifth unit is 28,718 hours, we can use the learning factor to calculate the cumulative production at that point.
Let's denote the cumulative production as CP and the time required for the fifth unit as T5. The learning factor is LF = 80%.
Using the learning curve formula:
CP1 = CP0 *[tex]2^{(log(LF)/log(2))[/tex]
Where CP1 is the cumulative production when the fifth unit is produced and CP0 is the cumulative production when the first unit is produced (CP0 = 1).
CP1 = 1 * [tex]2^{(log(0.8)/log(2))[/tex] = 1 * 2^(-0.32193) = 0.6688
Now, we can calculate the cumulative production when the eleventh unit is produced (CP11).
CP11 = CP1 * [tex]2^{(log(LF)/log(2))[/tex] = 0.6688 * 2^(log(0.8)/log(2)) = 0.6688 * 2^(-0.32193) = 0.4425
Since the time required for the fifth unit is 28,718 hours, we can calculate the time required for the eleventh unit (T11).
T11 = T5 *[tex](CP11/5)^{log(LF)/log(2)[/tex]
T11 = 28,718 * [tex](0.4425/5)^{(log(0.8)/log(2))[/tex] = 28,718 * 0.0885^(-0.32193) ≈ 51,529.49 hours
For more such question on production visit:
https://brainly.com/question/2292799
#SPJ8
Let's say that Marco is thinking of buying a new laptop computer that costs $960. Again, he is considering a payment plan that would give him six months to pay for the computer, with no interest charged. For the purposes of Questions, we will assume there are no taxes or other fees that would increase the total cost of the laptop.
Marco would need to make monthly payments of $160 for six months to pay off the laptop without any interest charges.
Marco is considering a payment plan for a laptop that costs $960, with a six-month payment period and no interest charges.
To calculate the monthly payment amount, we divide the total cost of the laptop by the number of months in the payment period:
Monthly payment = Total cost / Number of months
In this case, the total cost is $960, and the payment period is six months:
Monthly payment = $960 / 6
Monthly payment = $160
Therefore, Marco would need to make monthly payments of $160 for six months to pay off the laptop without any interest charges.
To learn more about interest visit : https://brainly.com/question/29451175
#SPJ11
Nathan correctly graphed the line of the inequality x+4y>4 on a coordinate grid, as shown, but did not shade the solution set. Which of the following points would appear in the solution set of this inequality?
The inequality in the graph is x + 4y > 4, with Nathan not shading the solution set.We will then substitute the coordinates of the solution set that satisfies the inequality.The points (0, 0), (1, 0), and (3, 1) are the ones that will appear in the solution set.
Points on the line of the inequality are substituted into the inequality to determine whether they belong to the solution set. Since the line itself is not part of the solution set, it is critical to verify whether the inequality contains "<" or ">" instead of "<=" or ">=". This indicates whether the boundary line should be included in the answer.To find out the solution set, choose a point within the region. The point to use should not be on the line, but instead, it should be inside the area enclosed by the inequality graph. For instance, (0,0) is in the region.
The solution set of x + 4y > 4 is located below the line on the coordinate plane. Any point below the line will satisfy the inequality. That means all of the points located below the line will be the solution set.
The solution set for inequality x + 4y > 4 will be any point that is under the line, thus the points (0, 0), (1, 0), and (3, 1) are the ones that will appear in the solution set.
Learn more about coordinate:
brainly.com/question/11337174
#SPJ11
Which graph shows a dilation?
The graph that shows a dilation is the first graph that shows a rectangle with an initial dilation of 4:2 and a final dilation of 8:4.
What is graph dilation?A graph is said to be dilated if the ratio of the y-axis and x-axis of the first graph is equal to the ratio of the y and x-axis in the second graph.
So, in the first graph, we can see that there is a scale factor of 4:2 and in the second graph, there is a scale factor of 8:4 which when divided gives 4:2, meaning that they have the same ratio. Thus, we can say that the selected figure exemplifies graph dilation.
Learn more about graph dilation here:
https://brainly.com/question/27907708
#SPJ1
Define: (i) arc length of a curve (ii) surface integral of a vector function (b) Using part (i), show that the arc length of the curve r(t)=3ti+(3t^2+2)j+4t^3/2k from t=0 to t=1 is 6 . [2,2] Green's Theorem (a) State the Green theorem in the plane. (b) Express part (a) in vector notation. (c) Give one example where the Green theorem fails, and explain how.
(i) Arc length of a curve: The arc length of a curve is the length of the curve between two given points. It measures the distance along the curve and represents the total length of the curve segment.
(ii) Surface integral of a vector function: A surface integral of a vector function represents the integral of the vector function over a given surface. It measures the flux of the vector field through the surface and is used to calculate quantities such as the total flow or the total charge passing through the surface.
(b) To find the arc length of the curve r(t) = 3ti + (3t^2 + 2)j + (4t^(3/2))k from t = 0 to t = 1, we can use the formula for arc length in parametric form. The arc length is given by the integral:
L = ∫[a,b] √[ (dx/dt)^2 + (dy/dt)^2 + (dz/dt)^2 ] dt,
where (dx/dt, dy/dt, dz/dt) are the derivatives of x, y, and z with respect to t.
In this case, we have:
dx/dt = 3
dy/dt = 6t
dz/dt = (6t^(1/2))/√2
Substituting these values into the formula, we get:
L = ∫[0,1] √[ 3^2 + (6t)^2 + ((6t^(1/2))/√2)^2 ] dt
= ∫[0,1] √[ 9 + 36t^2 + 9t ] dt
= ∫[0,1] √[ 9t^2 + 9t + 9 ] dt
= ∫[0,1] 3√[ t^2 + t + 1 ] dt.
Now, let's evaluate this integral:
L = 3∫[0,1] √[ t^2 + t + 1 ] dt.
To simplify the integral, we complete the square inside the square root:
L = 3∫[0,1] √[ (t^2 + t + 1/4) + 3/4 ] dt
= 3∫[0,1] √[ (t + 1/2)^2 + 3/4 ] dt.
Next, we can make a substitution to simplify the integral further. Let u = t + 1/2, then du = dt. Changing the limits of integration accordingly, we have:
L = 3∫[-1/2,1/2] √[ u^2 + 3/4 ] du.
Now, we can evaluate this integral using basic integration techniques or a calculator. The result should be:
L = 3(2√3)/2
= 3√3.
Therefore, the arc length of the curve r(t) = 3ti + (3t^2 + 2)j + (4t^(3/2))k from t = 0 to t = 1 is 3√3, which is approximately 5.196.
(a) Green's Theorem in the plane: Green's Theorem relates a line integral around a simple closed curve C to a double integral over the plane region D bounded by C. It states:
∮C (P dx + Q dy) = ∬D ( ∂Q/∂x - ∂P/∂y ) dA,
where C is a simple closed curve, P and
Q are continuously differentiable functions, and D is the region enclosed by C.
(b) Green's Theorem in vector notation: In vector notation, Green's Theorem can be expressed as:
∮C F · dr = ∬D (∇ × F) · dA,
where F is a vector field, C is a simple closed curve, dr is the differential displacement vector along C, ∇ × F is the curl of F, and dA is the differential area element.
(c) Example where Green's Theorem fails: Green's Theorem fails when the region D is not simply connected or when the vector field F has singularities (discontinuities or undefined points) within the region D. For example, if the region D has a hole or a boundary with a self-intersection, Green's Theorem cannot be applied.
Additionally, if the vector field F has a singularity (such as a point where it is not defined or becomes infinite) within the region D, the curl of F may not be well-defined, which violates the conditions for applying Green's Theorem. In such cases, alternative methods or theorems, such as Stokes' Theorem, may be required to evaluate line integrals or flux integrals over non-simply connected regions.
Learn more about curve segment here:
https://brainly.com/question/25822304
#SPJ11
4. Prove using the definition of "big Oh" that n^{2}+50 n \in O\left(n^{2}\right) \text {. } (Find appropriate values of C and N such that n^{2}+50 n ≤ C n^{2} for n ≥
The definition of "big Oh" :
Big-Oh: The Big-Oh notation denotes that a function f(x) is asymptotically less than or equal to another function g(x). Mathematically, it can be expressed as: If there exist positive constants.
The statement n^2 + 50n ∈ O(n^2) is true.
We need to show that there exist constants C and N such that n^2 + 50n ≤ Cn^2 for all n ≥ N.
To do this, we can choose C = 2 and N = 50.
Then, for n ≥ 50, we have:
n^2 + 50n ≤ n^2 + n^2 = 2n^2
Since 2n^2 ≥ Cn^2 for all n ≥ N, we have shown that n^2 + 50n ∈ O(n^2).
Therefore, the statement n^2 + 50n ∈ O(n^2) is true.
Know more about Big-Oh here:
https://brainly.com/question/14989335
#SPJ11
Show that t for the Pearson Correlation Coefficient is mathematically equivalent to t-test statistic for the least squares regression parameter.
Since Cov(X, Y) / sqrt(Var(X)) is the t-test statistic for the least squares regression parameter, we can conclude that:
t_r = t_regression.
To show the equivalence between the t-statistic for the Pearson Correlation Coefficient and the t-test statistic for the least squares regression parameter, we need to understand the mathematical relationships between these two statistics.
Let's consider a simple linear regression model with one independent variable (X) and one dependent variable (Y):
Y = β0 + β1*X + ε
where β0 and β1 are the intercept and slope coefficients, respectively, and ε is the error term.
The Pearson Correlation Coefficient (r) measures the strength and direction of the linear relationship between X and Y. It is defined as the covariance of X and Y divided by the product of their standard deviations:
r = Cov(X, Y) / (SD(X) * SD(Y))
The t-statistic for the Pearson Correlation Coefficient can be calculated as:
[tex]t_r = r \times \sqrt{(n - 2) / (1 - r^2)}[/tex]
where n is the sample size.
On the other hand, in a linear regression, we estimate the slope coefficient (β1) using the least squares method. The t-test statistic for the least squares regression parameter tests the hypothesis that the slope coefficient is equal to zero. It can be calculated as:
t_regression = (β1 - 0) / (SE(β1))
where SE(β1) is the standard error of the least squares regression parameter.
To show the equivalence between t_r and t_regression, we need to express them in terms of each other.
The Pearson Correlation Coefficient (r) can be written in terms of the slope coefficient (β1) and the standard deviations of X and Y:
r = (β1 * SD(X)) / SD(Y)
By substituting this expression for r in the t_r equation, we get:
t_r = ((β1 * SD(X)) / SD(Y)) * sqrt((n - 2) / (1 - ((β1 * SD(X)) / SD(Y))^2))
Simplifying this equation further:
t_r = (β1 * SD(X)) * sqrt((n - 2) / ((1 - ((β1 * SD(X)) / SD(Y))) * (1 + ((β1 * SD(X)) / SD(Y)))))
t_r = (β1 * SD(X)) * sqrt((n - 2) / (SD(Y)^2 - (β1 * SD(X))^2))
Now, let's consider the least squares regression equation for β1:
β1 = Cov(X, Y) / Var(X)
Substituting the definitions of Cov(X, Y) and Var(X):
β1 = Cov(X, Y) / (SD(X)^2)
By rearranging the equation, we can express Cov(X, Y) in terms of β1:
Cov(X, Y) = β1 * SD(X)^2
Substituting this expression for Cov(X, Y) in the t_r equation:
t_r = (β1 * SD(X)) * sqrt((n - 2) / (SD(Y)^2 - (β1 * SD(X))^2))
= (Cov(X, Y) / SD(X)) * sqrt((n - 2) / (SD(Y)^2 - (Cov(X, Y))^2 / SD(X)^2))
By substituting Var(X) = SD(X)^2 and rearranging, we have:
t_r = (Cov(X, Y) / sqrt(Var(X))) * sqrt((n - 2) / (SD(Y)^2 - (Cov(X, Y))^2 / Var(X)))
Since Cov(X, Y) / sqrt(Var(X)) is the t-test statistic for the least squares regression parameter, we can conclude that:
t_r = t_regression
Therefore, we have mathematically shown the equivalence between the t-statistic for the Pearson Correlation Coefficient and the t-test statistic for the least squares regression parameter.
To know more about equivalence visit
https://brainly.com/question/23221939
#SPJ11
Guess A Particular Solution Up To U2+2xuy=2x2 And Then Write The General Solution.
To guess a particular solution up to the term involving the highest power of u and its derivatives, we assume that the particular solution has the form:
u_p = a(x) + b(x)y
where a(x) and b(x) are functions to be determined.
Substituting this into the given equation:
u^2 + 2xu(dy/dx) = 2x^2
Expanding the terms and collecting like terms:
(a + by)^2 + 2x(a + by)(dy/dx) = 2x^2
Expanding further:
a^2 + 2aby + b^2y^2 + 2ax(dy/dx) + 2bxy(dy/dx) = 2x^2
Comparing coefficients of like terms:
a^2 = 0 (coefficient of 1)
2ab = 0 (coefficient of y)
b^2 = 0 (coefficient of y^2)
2ax + 2bxy = 2x^2 (coefficient of x)
From the equations above, we can see that a = 0, b = 0, and 2ax = 2x^2.
Solving the last equation for a particular solution:
2ax = 2x^2
a = x
Therefore, a particular solution up to u^2 + 2xuy is:
u_p = x
To find the general solution, we need to add the homogeneous solution. The given equation is a first-order linear PDE, so the homogeneous equation is:
2xu(dy/dx) = 0
This equation has the solution u_h = C(x), where C(x) is an arbitrary function of x.
Therefore, the general solution to the given PDE is:
u = u_p + u_h = x + C(x)
where C(x) is an arbitrary function of x.
Learn more about arbitrary function here:
https://brainly.com/question/33159621
#SPJ11
Let f(x)=Ax²+6x+4 and g(x)=2x−3. Find A such that the graphs of f(x) and g(x) intersect when x=4 If necessary, entet your answer as a decimal 1) Moving to another question will save this response. A company manufactures and sells baseball hats They've estimated the cost to manutacture H hats in a month. given by C(H)=2.4H+1960 dollars each month. The demand for H hats at p dollars per hat is given by the demand equation 2H+129p=6450 What is the maximum amount of montly profit the company can make when nanuacturing and selfng these hats? Give your answer as a numelical yakie (no labsis) rounced appropriated
The maximum monthly profit the company can make when manufacturing and selling these hats is $5327.11.
Let f(x) = Ax² + 6x + 4 and g(x) = 2x - 3.
Find A such that the graphs of f(x) and g(x) intersect when x = 4
When x = 4, we have:
g(x) = 2(4) - 3 = 8 - 3 = 5g(x) = 5
Now, let's find f(x) by replacing x with 4 in the equation:
f(x) = Ax² + 6x + 4f(x)
= A(4)² + 6(4) + 4f(x)
= 16A + 24 + 4f(x)
= 16A + 28f(x)
= 16A + 28
Now that we have the values of f(x) and g(x), we can equate them and solve for A:
16A + 28 = 5
Simplify the equation:16
A = -23A = -23/16
Therefore, A = -1.4375.
Cost function, C(H) = 2.4H + 1960
Demand function, 2H + 129p = 6450
We can solve the demand function for H:
H = (6450 - 129p)/2
The maximum monthly profit is given by:
C(18.82) = 5830 - 309.6(18.82)
= $5327.11(rounded to 2 decimal places)
For more related questions on monthly profit:
https://brainly.com/question/1291585
#SPJ8
What is the value of 5x² + x if x = 4?
Answer:
x= 4
5(4)²+4 = 5*16 + 4 = 84
Step-by-step explanation:
Answer:
84
Explanation:
The expression is [tex]\sf{5x^2+x}[/tex].
To evaluate it for x = 4, I plug in 4 for x:
[tex]\sf{5(4)^2+4}[/tex]
Square 4 first:
[tex]\sf{5\times16+4}[/tex]
[tex]\sf{80+4}[/tex]
Add:
[tex]\sf{84}[/tex]
Hence, the answer is 84.GETS BRAINLIEST AND 11PTS!
Maria wants to know if the number of words on a page in her earth science book is generally more than the number of words on a page in her math book. She takes a random sample of 25 pages in each book, then calculates the mean, median, and mean absolute deviation for the 25 samples of each book. Mean Median Mean Absolute Deviation Earth science 48. 9 41 9. 2 Math 34. 5 44 1. 9 She claims that because the mean number of words on each page in the earth science book is greater than the mean number of words on each page in the math book, the earth science book has more words per page. Based on the data, is this a valid inference? Yes, because the mean is larger in the earth science book. No, because the mean is larger in the earth science book. Yes, because there is a lot of variability in the earth science book data. No, because there is a lot of variability in the earth science book data
We cannot conclude that the earth science book has more words per page than the math book based on the mean alone.
Based on the data provided, it is not a valid inference to conclude that the earth science book has more words per page than the math book just because the mean number of words on each page in the earth science book is greater than the mean number of words on each page in the math book.
Firstly, the median number of words on each page in the math book is actually higher than the median for the earth science book (44 vs 41), which suggests that there may be some outliers or extreme values in the earth science book that are pulling the mean up.
Secondly, there is a much larger mean absolute deviation (MAD) for the earth science book (9.2) compared to the MAD for the math book (1.9). This indicates that the data points in the earth science book are much more spread out and variable than in the math book, further suggesting that the mean may not be a reliable measure of central tendency for this dataset.
Therefore, we cannot conclude that the earth science book has more words per page than the math book based on the mean alone.
Learn more about science book from
https://brainly.com/question/32859646
#SPJ11
BRAINLIEST: Which can be the first step in finding the equation of the line that passes through the points (5, negative 4) and (negative 1, 8) in slope-intercept form?
Answer:
The first step in finding the equation for the line that passes through the points (5,-4) and (-1, 8) is to calculate the slope of the line:
(5,-4)(-1,8)=-2
-Therefore, the answer is A.
Otto used 5.5 cups of whole wheat flour and x cups of white flour in the recipe. What is the equation that can be used to find the value of y, the total amount of flour that Otto used in the recipe, and what are the constraints on the values of x and y ? y=5.5x;x is any integer greater than or equal to 0 , and y is an integer greater than or equal to 5 . y=5.5x;x is any real number greater than or equal to 0 , and y is any real number greater than or equal to 5.5. y=x+5.5;x is any integer greater than or equal to 0 , and y is an integer greater than or equal to 5 . y=x+5.5;x is any real number greater than or equal to 0 , and y is any real number greater than or equal to 5.5.
The equation y = 5.5x represents the relationship between the amount of whole wheat flour and white flour used in the recipe, where x is the amount of white flour (a non-negative real number) and y is the total amount of flour (a real number greater than or equal to 5.5). The practical constraints on x and y may involve using whole numbers (integers) for measurement purposes.
The equation that can be used to find the value of y, the total amount of flour that Otto used in the recipe, is y = 5.5x. This equation represents the fact that Otto used 5.5 cups of whole wheat flour and x cups of white flour in the recipe.
The constraints on the values of x and y are as follows:
For x: x is any real number greater than or equal to 0. This means that the value of x can be a non-negative real number, including zero. There is no upper limit on the value of x.
For y: y is any real number greater than or equal to 5.5. This means that the value of y can be a real number greater than or equal to 5.5. There is no upper limit on the value of y.
However, it's important to note that in the context of the problem, it is likely that x and y would be restricted to practical values. For example, x may be constrained to whole numbers (integers) since flour is typically measured in cups, which are discrete units. Similarly, y may also be constrained to whole numbers (integers) since the total amount of flour used in the recipe would likely be a whole number of cups.
In summary, the equation y = 5.5x represents the relationship between the amount of whole wheat flour and white flour used in the recipe, where x is the amount of white flour (a non-negative real number) and y is the total amount of flour (a real number greater than or equal to 5.5). The practical constraints on x and y may involve using whole numbers (integers) for measurement purposes.
for such more question on equation
https://brainly.com/question/17482667
#SPJ8
The accompanying table contains data on the weight, in grams, of a sample of 50 tea bags produced during an eight-hour shift. Complete parts (a) through (d). Click the icon to view the data table. Mor
a. The null hypothesis of the sample of 50 tea bags produced during is that the mean amount of tea per bag is equal to 5.5 grams, while the alternative hypothesis is that it is different from 5.5 grams.
b. The test statistic is 0.1706.
c. The p-value is 0.8667.
d. The p-value is greater than the significance level of 0.05, hence, we fail to reject the null hypothesis and conclude that there is insufficient evidence to conclude that the mean amount of tea per bag is different from 5.5 grams.
The confidence interval is between 5.4517 and 5.5520 grams. This means that we are 95% confident that the population mean amount of tea per bag is between 5.4517 and 5.5520 grams.
The conclusions in parts (a) and (b) remain consistent.
Test statistic explainedThe null hypothesis for this data set is that the mean amount of tea per bag is equal to 5.5 grams, while the alternative hypothesis is that it is different from 5.5 grams.
Given significance level = 0.05.
To get the test statistic, we have to calculate both the sample mean and sample standard deviation for this data.
Thus
x = (5.59 + 5.48 + ... + 5.56) / 50 = 5.5018
s = 0.1067
Note: x is mean and s is standard deviation.
The test statistic is given by:
[tex]t = (x - u) / (s /\sqrt(n)) [/tex]
[tex]= (5.5018 - 5.5) / (0.1067 /\sqrt(50))[/tex]
= 0.1706
To get p-value, check the t-distribution table when df is 49. This is a two-tailed test, so look for the probability of obtaining a t-value greater than 0.1706 or less than -0.1706.
p-value = P(T greater than 0.1706) + P(T less than -0.1706)
= 0.8667
The result shows that p-value is greater than the significance level of 0.05, hence, we fail to reject the null hypothesis. There is insufficient evidence to conclude that the mean amount of tea per bag is different from 5.5 grams.
To get a 95% confidence interval estimate of the population.
[tex]CI = x + or - t-value * (s /\sqrt(n))[/tex]
From a t-distribution table, t-value = 2.0096 and df = 49
[tex]CI = 5.5018 + or - 2.0096 * (0.1067 /\sqrt(50))[/tex]
= (5.4517, 5.5520)
Interpretation: we are 95% confident that the population mean amount of tea per bag is between 5.4517 and 5.5520 grams.
The conclusions in parts (a) and (b) remain consistent. In both cases, we fail to reject the null hypothesis and conclude that there is insufficient evidence to conclude that the mean amount of tea per bag is different from 5.5 grams.
Learn more on test statistic on https://brainly.com/question/15110538
#SPJ1
Question is incomplete. Find complete question on the attached.
Job Interview Question (JIQ). A researcher wishes to know whether different age groups have varying mean times watching TV. She considers the following one-way fixed-effects ANOVA model: TIME ij=μ+τi+εij where μ is the grand mean viewing time (hours), μi is the mean viewing time of group i,τi=μi−μ is the differential effect of group i on viewing time, ε ij is the the random error component about the mean μ+τ i for the j th subject from the i th group. The age groups are (adult) women (W), (adult) men (M), teens (T), and children (C). Dummy variables W,M and T are created, which are defined as follows: W=1 if the individual is a woman, 0 otherwise, M=1 if the individual is a man, 0 otherwise, and T=1 if the individual is a teenager, 0 otherwise. The PROC GLM output is shown below: Estimate: (a) women's mean viewing time (b) difference in mean viewing time between women and children (c) difference in mean viewing time between women and teenagers
(a) Estimate for women's mean viewing time can be obtained from the coefficient estimate for the dummy variable W.
(b) Difference in mean viewing time between women and children can be obtained by subtracting the coefficient estimate for the dummy variable C from the coefficient estimate for the dummy variable W.
(c) Difference in mean viewing time between women and teenagers can be obtained by subtracting the coefficient estimate for the dummy variable T from the coefficient estimate for the dummy variable W.
The PROC GLM output provides the estimates for the model coefficients. To answer the questions:
(a) The estimate for women's mean viewing time (μw) can be obtained from the coefficient estimate for the dummy variable W.
(b) The difference in mean viewing time between women and children (μw - μc) can be obtained by subtracting the coefficient estimate for the dummy variable C from the coefficient estimate for the dummy variable W.
(c) The difference in mean viewing time between women and teenagers (μw - μt) can be obtained by subtracting the coefficient estimate for the dummy variable T from the coefficient estimate for the dummy variable W.
By examining the coefficient estimates in the PROC GLM output, you can determine the specific values for (a), (b), and (c) in the context of the given ANOVA model.
Learn more about coefficient here :-
https://brainly.com/question/1594145
#SPJ11
We wish to estimate what percent of adult residents in a certain county are parents. out of 400 adult residents sampled, 156 had kids. based on this, construct a 95% confidence interval for the proportion p of adult residents who are parents in the country.
Express your answers in trivia inequality form and give your as decimals to three places.
___
Given: n = 400; x = 156We can calculate the sample proportion:
$$\hat p=\frac{x}{n}=\frac{156}{400}=0.39$$
To construct a 95% confidence interval for the population proportion p, we can use the formula:
$$\hat p\pm z_{\alpha/2}\sqrt{\frac{\hat p(1-\hat p)}{n}}$$where $z_{\alpha/2}$ is the z-score corresponding to a 95% confidence level, which is 1.96 (rounded to two decimal places).
Putting the values in the formula,
we have: $$0.39\pm 1.96\sqrt{\frac{0.39(1-0.39)}{400}}$$Simplifying, we get: $$0.39\pm 1.96\times 0.0321$$Now,
we can express the 95% confidence interval in the form of a trivium inequality: $$\boxed{0.30
To know more about trivium inequality
https://brainly.com/question/33625567
#SPJ11
True or false
Given 4 distinct objects, if 2 objects are taken at a time,
the possible number of permutations is equal to 3.
False.
If 2 objects are taken at a time from 4 distinct objects, the number of permutations can be calculated using the formula for permutations of n objects taken r at a time, which is nPr = n! / (n - r)!. In this case, n = 4 and r = 2.
So, the number of permutations would be 4P2 = 4! / (4 - 2)! = 4! / 2! = 4 * 3 * 2 * 1 / (2 * 1) = 12.
Therefore, the possible number of permutations is equal to 12, not 3.
Learn more about permutations here:
https://brainly.com/question/29855401
#SPJ11
The difference between a ratio scale and an interval scale is I. a ratio scale has a true zero point, so zero on the scale corresponds to zero of the concept being measured. II. an interval scale puts scores into both categories and continuous, while a ratio scale measures on a continuous scale. III. an interval scale has a true zero point, so zero on the scale corresponds to zero of the concept being measured. IV. an interval scale has equal intervals between the points on the scale, whered a ratio scale equal ratios between the points on the scale. V. an interval scale puts scores into categories, while a ratio scale measures on a continuous scale. A. I Only B. II and IV c. None of these D. I and IV E. IV Only
An interval scale has equal intervals between the points on the scale, whereas a ratio scale has equal ratios between the points on the scale. The answer is option D. I and IV.
The difference between a ratio scale and an interval scale is: A ratio scale has a true zero point, so zero on the scale corresponds to zero of the concept being measured. and IV.
An interval scale has equal intervals between the points on the scale, whereas a ratio scale has equal ratios between the points on the scale. Therefore, the answer is D. I and IV.
The ratio scale has a true zero point, so zero on the scale corresponds to zero of the concept being measured. It means that a ratio scale has a true zero point, which means that zero represents a complete lack of the concept that is being measured.
For example, in a scale measuring height, a height of 0 cm means that the person has no height at all. It is a very precise scale.An interval scale has equal intervals between the points on the scale, whereas a ratio scale has equal ratios between the points on the scale. The scale is divided into equal parts, but the concept being measured is not proportionate.
For example, temperature measurements are measured on an interval scale, with zero degrees Celsius indicating that there is no temperature.
Therefore, the difference between a ratio scale and an interval scale is that a ratio scale has a true zero point, meaning that zero on the scale corresponds to zero of the concept being measured, while an interval scale has equal intervals between the points on the scale, and a ratio scale has equal ratios between the points on the scale. This makes the ratio scale more precise and informative than the interval scale.
In conclusion, when analyzing data, it is important to know which scale is being used in order to interpret the results correctly.
To know more about interval scale visit:
brainly.com/question/31608615
#SPJ11
USE MATLAB
Consider the following equation
student submitted image, transcription available below
• Determine an interval [a, b] on which fixed point iteration will converge.
• Use the fixed point iteration to find a fixed point accurate within 10−5 .
• Write a subroutine
[p, flag] = steffensen(fun, p0, tol, maxIt)
for Use Steffensen’s method. Use it approximate the fixed point accurate within 10−5
Steffensen's method is a modified form of the fixed point iteration method that can provide faster convergence for some functions. If you specifically want to use Steffensen's method, please let me know, and I'll provide a modified subroutine accordingly.
To determine an interval [a, b] on which fixed point iteration will converge, we need to analyze the behavior of the given function in that interval. Since you haven't provided the function or equation in your question, I'll assume you have the equation and can substitute it into the following explanations.
To find a suitable interval [a, b] for convergence, you can follow these steps:
Choose an initial guess value of p0 for the fixed point.
Compute the function value f(p0) at the initial guess.
Compute the derivative f'(p0) at the initial guess.
Check if the absolute value of the derivative |f'(p0)| is less than 1 in the interval [a, b]. If it is, then the fixed point iteration will converge in that interval.
If |f'(p0)| < 1, expand the interval around p0 until you find an interval [a, b] where |f'(p0)| < 1 for all values in [a, b].
Once you have determined a suitable interval for convergence, you can proceed with the fixed point iteration to find a fixed point accurate within 10^(-5). The fixed point iteration method involves repeatedly applying a function transformation until convergence is achieved. The iteration formula is typically of the form:
p(i+1) = g(p(i))
where p(i) is the current approximation and g(p) is a function that transforms p.
Here's an example implementation of a MATLAB subroutine that uses the fixed point iteration method:
Matlab
Copy code
function [p, flag] = fixed-point iteration(fun, p0, tol, max)
% Inputs:
% - fun: The function to find the fixed point of.
% - p0: The initial guess for the fixed point.
% - tol: The tolerance for convergence.
% maxt: The maximum number of iterations allowed.
% Outputs:
% - p: The approximation of the fixed point.
% - flag: A flag indicating the convergence status (1: converged, 0: not converged).
p = p0;
flag = 0;
for i = 1:maxIt
p_prev = p;
p = fun(p_prev);
if abs(p - p_prev) < tol
flag = 1;
break;
end
end
if flag == 0
fprintf('Fixed point iteration did not converge within the maximum number of iterations.\n');
end
end
You can use this subroutine by providing the appropriate function handle fun, initial guess p0, tolerance tol, and a maximum number of iterations max. It will return the approximation of the fixed point p and a convergence flag.
Please note that Steffensen's method is a modified form of the fixed point iteration method that can provide faster convergence for some functions. If you specifically want to use Steffensen's method, please let me know, and I'll provide a modified subroutine accordingly.
To know more about the word Derivative, visit:
https://brainly.com/question/29144258
#SPJ11
Find the exact extreme values of the function
= f(x, y) = (x-28)²+(y-1)2 + 310
subject to the following constraints:
0 < x < 20
0≤ y ≤13
We have the function $f(x, y) = (x-28)^2+(y-1)^2 + 310$ subject to the following constraints The domain of $f$ is the closed and bounded rectangle \[[0, 20] \times [0, 13].\].
Since $f$ is continuous and the domain of $f$ is closed and bounded, then by the Extreme Value Theorem, $f$ attains both an absolute maximum and an absolute minimum somewhere on its domain.The first step is to find the critical points.
We find the critical points of $f$ by solving the following system of equations Therefore, we need to find the partial derivatives of Now, we have the following system of equations: The solution to this system is \[(x, y) = (28, 1)\]which is the only critical point.the absolute maximum of $f$ is $1003$ and it is attained at the point $(0, 13).$the absolute minimum of $f$ is $501$ and it is attained at the point $(20, 0).$
To know more about function visit :
https://brainly.com/question/30721594
#SPJ11
A tank contains 80 kg of salt and 1000 L of water. A solution of a concentration 0.04 kg of salt per liter enters a tank at the rate 6 L/ min. The solution is mixed and drains from the tank at the same rate. a.) What is the concentration of our solution in the tank initially? concentration = (kg/L) b.) Find the amount of salt in the tank after 5 hours. amount = (kg) c.) Find the concentration of salt in the solution in the tank as time approaches infinity. concentration = (kg/L)
a) The concentration of the solution in the tank initially is 0.04 kg/L. b) After 5 hours, the amount of salt in the tank is 600 kg. c) As time approaches infinity, the concentration of salt in the solution in the tank will approach 0.04 kg/L.
a) Initially, the tank contains 80 kg of salt and 1000 L of water. The concentration of salt is given by the ratio of the mass of salt to the volume of the solution. Therefore, the initial concentration is 80 kg / 1000 L = 0.08 kg/L.
b) In 5 hours, the solution enters and drains from the tank at a rate of 6 L/min. So, in 5 hours, the total amount of solution that enters and drains is 6 L/min * 60 min/hr * 5 hr = 1800 L. Since the concentration of the incoming solution is 0.04 kg/L, the amount of salt added to the tank is 0.04 kg/L * 1800 L = 72 kg. Since the initial amount of salt was 80 kg, the total amount of salt in the tank after 5 hours is 80 kg + 72 kg = 152 kg.
c) As time approaches infinity, the amount of salt entering and draining from the tank will keep the concentration constant. Since the incoming solution has a concentration of 0.04 kg/L, the concentration in the tank will approach 0.04 kg/L as more solution enters and drains, maintaining the same concentration over time. Therefore, the concentration of salt in the solution in the tank as time approaches infinity is 0.04 kg/L.
To learn more about ratio click here
brainly.com/question/13419413
#SPJ11
Two popular strategy video games, AE and C, are known for their long play times. A popular game review website is interested in finding the mean difference in playtime between these games. The website selects a random sample of 43 gamers to play AE and finds their sample mean play time to be 3.6 hours with a variance of 54 minutes. The website also selected a random sample of 40 gamers to test game C and finds their sample mean play time to be 3.1 hours and a standard deviation of 0.4 hours. Find the 90% confidence interval for the population mean difference m m AE C − .
The confidence interval indicates that we can be 90% confident that the true population mean difference in playtime between games AE and C falls between 0.24 and 0.76 hours.
The 90% confidence interval for the population mean difference between games AE and C (denoted as μAE-C), we can use the following formula:
Confidence Interval = (x(bar) AE - x(bar) C) ± Z × √(s²AE/nAE + s²C/nC)
Where:
x(bar) AE and x(bar) C are the sample means for games AE and C, respectively.
s²AE and s²C are the sample variances for games AE and C, respectively.
nAE and nC are the sample sizes for games AE and C, respectively.
Z is the critical value corresponding to the desired confidence level. For a 90% confidence level, Z is approximately 1.645.
Given the following information:
x(bar) AE = 3.6 hours
s²AE = 54 minutes = 0.9 hours (since 1 hour = 60 minutes)
nAE = 43
x(bar) C = 3.1 hours
s²C = (0.4 hours)² = 0.16 hours²
nC = 40
Substituting these values into the formula, we have:
Confidence Interval = (3.6 - 3.1) ± 1.645 × √(0.9/43 + 0.16/40)
Calculating the values inside the square root:
√(0.9/43 + 0.16/40) ≈ √(0.0209 + 0.004) ≈ √0.0249 ≈ 0.158
Substituting the values into the confidence interval formula:
Confidence Interval = 0.5 ± 1.645 × 0.158
Calculating the values inside the confidence interval:
1.645 × 0.158 ≈ 0.26
Therefore, the 90% confidence interval for the population mean difference between games AE and C is:
(0.5 - 0.26, 0.5 + 0.26) = (0.24, 0.76)
To know more about confidence interval click here :
https://brainly.com/question/32583762
#SPJ4
Evaluate the following integrals using substitution. (a) ∫2t+1dt (b) ∫x2ex3dx
(a) ∫2t+1dt
Integration by substitution, also known as u-substitution, is a technique used to simplify integrals. We use the variable u as a substitute for a function inside a larger function. We then change the integral so that it is only in terms of u, and we integrate it before reversing the substitution and substituting the original variable back in. The integral we are given can be solved using u-substitution as follows:
Let u = 2t + 1.
Therefore, we can express t in terms of u as:
t = (u - 1)/2
Substituting this value of t into the integral, we have:
∫2t+1dt= ∫2((u - 1)/2)+1dt= ∫u+1/2dt
Now we can integrate the function using the power rule of integration, which is to raise the variable by one and divide by the new exponent:
∫u+1/2dt= (2/3) u3/2 + C
We then replace u with our original value of t in the solution:
∫2t+1dt = (2/3) (2t + 1)3/2 + C
(b) ∫x2ex3dx
Let u = x3.
Therefore, we can express dx in terms of u as:
dx = (1/3)u-2/3du
Substituting this value of dx and x into the integral, we have:
∫x2ex3dx= ∫u2/3eudu
Now we can integrate the function using the power rule of integration, which is to raise the variable by one and divide by the new exponent:
∫u2/3eudu= 3/2 u2/3 e + C
We then replace u with our original value of x in the solution:
∫x2ex3dx = 3/2 x2/3 e x3 + C
To know more about integration visit:
https://brainly.com/question/31744185
#SPJ11
If A and B are events, use the result derived in Exercise 2.5(a) and the Axioms ir prove that P(A)=P(A∩B)+P(A∩ B
ˉ
). *2.22. If A and B are events and B⊂A, use the result derived in Exercise 2.5(b) and the Axioms in Definition 2.6 to prove that P(A)=P(B)+P(A∩ B
ˉ
). 2.23. If A and B are events and B⊂A, why is it "obvious" that P(B)≤P(A) ? 2.24.Use the identities A = Intersection of A and S and S = Unions of B and not B and a distributive law to prove that A = Unions of (Intersection of A and B) and (Intersection of A and not B).
*Exercise2.5(b) Use the identities A = Intersection of A and S and S = Unions of B and not B and a distributive law to prove that, If A contains B then A = Unions of B and (Intersection of A and not B).
*Definition 2.6student submitted image, transcription available below
When P(A) >= 0, P(S) = 1, and If those form a sequence of pairwise mutually exclusive events in S.
Proof for P(A)=P(A∩B)+P(A∩ B') is shown below: Let A and B be any two events. Then A can be expressed as A = (A∩B)∪(A∩B') which are mutually exclusive events.
This implies that P(A) = P(A∩B)+P(A∩B') by axiom 3 of probability. There
From the above result derived in Exercise 2.5 (a), we can see that it holds true for any two events A and B.
Therefore, we can consider B as the subset of A, i.e., B⊂A and prove that P(A)=P(B)+P(A∩ B') using the result derived in
Hence, we can say that if A and B are events and B⊂A, use the result derived in Exercise 2.5(b) and the Axioms in Definition 2.6 to prove that P(A)=P(B)+P(A∩ B').
Proof: If B⊂A, then we can express A as the union of B and A∩B' since the set A can be partitioned as the set B and the complement of B, A-B.
Therefore, P(A) = P(B)+P(A∩ B') since P(A) = P(B∪(A∩B'))
using axiom 3 of probability and using the Axioms in Definition 2.6.
Hence, we have seen the proof for P(A)=P(A∩B)+P(A∩ B') and P(A)=P(B)+P(A∩ B') using the results derived in Exercise 2.5(a) and 2.5(b) respectively. We have also understood the proof for B⊂A and why P(B)≤P(A) is obvious and the proof for A = Unions of (Intersection of A and B) and (Intersection of A and not B).
To know more about probability visit:
brainly.com/question/32117953
#SPJ11
