find [oh−] of a 0.33 m methylamine (ch3nh2) solution. (methylamine has a kb value of 4.4×10−4.)

The moles of sulfuric acid will be formed from 58.0 g of so3 in water is found to be 0.724⋅mol.

Sulfur dioxide (SO2) and nitrogen oxides (NOX) that are released into the atmosphere and carried by air currents and wind result in acid rain. Acids made of sulfuric and nitric compounds are produced when the SO2 and NOX react with oxygen, water, and other substances. Before dropping to the ground, they then combine with water and other substances.

Moles of sulfur trioxide=58.0⋅g/80.07⋅g⋅mol−1 = 0.724⋅mol .

Inhaling sulphur trioxide fumes can be harmful and result in burns to the skin and internal organs. Acid rain is a result of sulphur oxides combining with water vapour in the atmosphere to form sulfuric acid.

Learn more about acid rain here:

brainly.com/question/30168623

#SPJ4

Chemical reactions occur so the particles can turn into gas.

For a given substance, the entropy of the liquid state is higher than the entropy of the solid state. Likewise, the entropy of the gas is higher than the entropy of the liquid. thus, entropy increases in processes in which solid or liquid reactants form gassy products.

Chemical reactions involve breaking chemical bonds between reactant motes( patches) and forming new bonds between tittles in product patches( motes). The number of tittles ahead and after the chemical change is the same but the number of motes will change.

Learn more about entropy visit:

brainly.com/question/14131507

#SPJ4

The empirical formula of the compound (chromium oxide) formed when 100 grams of chromium is heated in the presence of excess oxygen is CrO₃

The chemical formula of a compound that gives the proportions (ratios) of the elements present in the compound but not the precise number or arrangement of atoms is known as an empirical formula.

We'll start by figuring out how much oxygen is in the compound. Below is an example of this.

Mass of chromium = 100 grams

Mass of compound  = 192.31 grams

Mass of oxygen =?

Mass of oxygen = (Mass of product) - (Mass of chromium)

Mass of oxygen = 192.31- 100

Mass of oxygen = 92.31 grams

Mass of chromium (Cr) = 100 grams

Mass of oxygen = 32.31 grams

Empirical formula = ?

Divide by their molar mass

Cr = 100/52 = 1.9

O =92.31/16 = 5.7

Divide by the smallest

Cr = 1.9/1.9 = 1

Br = 5.7/1.9 = 3

To know more about empirical formula visit:

https://brainly.com/question/29402093

#SPJ4

Since there is not much of an energy difference between the 3p and 3d subshells in S, an electron may move easily between them, making sp³d² hybridization conceivable.

The process of two key mono DNA and/or RNA molecules joining together to generate a double-stranded molecule is known as hybridization in the context of genomics. The proper base pairing between the four single-stranded molecule is necessary for the bonding.

D begins from the third orbital as the energy disparity between subshells.

As a result, an electron cannot move from the second to the third orbital plane. They are therefore unable to undergo sp³d² hybridization.

To know more about Hybridization visit:

https://brainly.com/question/28468454

#SPJ4

Period 2 and period 3 elements do not have the same trend in terms of their electronic configurations. Period 2 elements have 2 electron shells and period 3 elements have 3 electron shells.

The elements in each period have one more electron shell than the elements in the previous period. As a result, the elements in each period have a different number of valence electrons, which affects their chemical properties.

As the period increases, the elements in the period become more metallic. The elements of Period 2 are generally non-metals, and the elements of Period 3 are generally metals.

Find out more on period 2 and 3 elements here: https://brainly.com/question/18878801

#SPJ1

The intermolecular forces present in a pure sample of each:

DISPERSION: H₂, Ar, CH₂Cl₂, H₂S, HCN, HF, NH₃, CH₃OH, PF₅

DIPOLE-DIPOLE: CH₂Cl₂, H₂S, HCN, BrCl₅, NH₃, CH₃OH, HF

H BOND: NH₃, HF, CH₃OH

An intermolecular force is a force that mediates interactions between molecules, such as electromagnetic forces of attraction or repulsion that act between atoms and other types of neighboring particles, such as atoms or ions. Intermolecular forces are classified into three types: London dispersion forces (LDF), dipole-dipole interactions, and hydrogen bonding. Molecules can have any combination of these three types of intermolecular forces, but all substances have at least one of them. Intermolecular forces are electrostatic in nature, meaning they form when positively and negatively charged species interact. Intermolecular interactions, like covalent and ionic bonds, are made up of both attractive and repulsive components.

Here,

The intermolecular forces present in a pure sample of each are as follows:

DISPERSION: H₂, Ar, CH₂Cl₂, H₂S, HCN, HF, NH₃, CH₃OH, PF₅

DIPOLE-DIPOLE: CH₂Cl₂, H₂S, HCN, BrCl₅, NH₃, CH₃OH, HF

H BOND: NH₃, HF, CH₃OH

To know more about intermolecular forces,

https://brainly.com/question/9007693

#SPJ4

The denominator of density determines how quickly a gas diffuses 16.7 seconds.

It will be equal to 36 or 6 if,

7/16 x 6

7/4 x 6

But chlorine has a volume that is double that of oxygen. Chlorine escapes at a rate of

7 x 3 (2/1 x 7/4 x 6) = 21 seconds.

A diffusion is what?

A substance diffuses when it moves from a region with a high concentration to one of lower concentration. When particles in gases and liquids randomly collide and disperse, diffusion takes place. For living things, diffusion is a crucial mechanism because it governs how molecules enter and exit cells.

Definition: A substance's movement (whether it be a solid, liquid).

To know more about diffusion visits :

https://brainly.in/question/6407468

#SPJ1

The denominator of density determines how quickly a gas diffuses 16.7 seconds.

It will be equal to 36 or 6 if,

7/16 x 6

7/4 x 6

But chlorine has a volume that is double that of oxygen. Chlorine escapes at a rate of

7 x 3 (2/1 x 7/4 x 6) = 21 seconds.

A substance diffuses when it moves from a region with a high concentration to one of lower concentration. When particles in gases and liquids randomly collide and disperse, diffusion takes place. For living things, diffusion is a crucial mechanism because it governs how molecules enter and exit cells.

Definition: A substance's movement (whether it be a solid, liquid).

To know more about diffusion visits :

https://brainly.com/question/20843145

#SPJ1

Answer:

Explanation:

An equation in point-slope form for the line perpendicular to y=1/4x-7 and passing through (-2,-6) is:

y - (-6) = -4(x - (-2))

This equation can also be written in slope-intercept form (y = mx + b) as:

y = -4x + 4

The slope of the line is -4 because it is perpendicular to the line y=1/4x-7 and the slope of that line is 1/4. The point (-2,-6) is the point where the line passes through, so the y-intercept is 4.

Answer:

Liquid; melting.

Explanation:

So what is being shown is a phase change diagram. Because we start at an atm of 1.5 (staying steady means that it doesn't drop so we always stay at 1.5 atm) and at a temperature of -150, the original state of matter is a solid. Next, we look at what happens when the temperature goes to 300 degrees, yet still maintaining the 1.5 atm. This means that it now turns into a liquid (based on placement on diagram). This means the matter after the temperature change was a liquid. And going from solid to liquid would be called melting.

Here's an example phase diagram so that you can rely on it in the future problems!

The molar concentration of H3O+ in cola with a pH of 4.240 will be 7.59 M, and the pH of the aqueous solution will be 13.7.

In chemistry, the pH scale is used to define the acidity or basicity of an aqueous solution. Historically, pH stood for "potential of hydrogen." The pH values of acidic solutions are typically lower than those of basic or alkaline solutions.

A. [H₃O⁺] = 2 x 10⁻¹⁴ M

We must determine the pH.

Calculation of pH

pH equals -log [H3O+]

Replacement pH = - log [2 x 10⁻¹⁴]

pH of the result is 13.7

B.

[H₃O⁺] = ?

pH = 3.12

pH is expressed as = - log [H3O+]

Replacement 3.12 = - log [H3O+]

Conclusion [H3O+] = 7.59 M

Learn more about pH

brainly.com/question/29766400

#SPJ4

The reaction for sodium, Na, that corresponds to the first ionization energy is as follows:

Na(g) → Na⁺(g) + e⁻

In many cases, this energy is expressed in kJ/mol.

The following reaction for chloride, Cl, corresponds to the first ionization energy:

Cl(g) + e⁻ →Cl(g)

The energy needed to eject an electron from a gaseous atom is referred to as the ionization energy. Ionization energy, sometimes referred to as ionization potential, is the amount of energy needed to remove an electron from an isolated atom or molecule in physics and chemistry.

Here,

For Sodium, Na, the reaction that corresponds to the first ionization energy is the following one:

Na(g) → Na⁺(g) + e⁻

This energy is frequently expressed in kJ/mol

For Chloride, Cl, the reaction that corresponds to the first ionization energy is the following one:

Cl(g) + e⁻ →Cl(g)

To know more about ionization energy,

https://brainly.com/question/28385102

#SPJ4

A. The product of the reaction sequence is Na[(CH3)2NH2]Cl, where Na is the counterion. There is no chiral center in the structure, so no configuration needs to be shown.

A reaction sequence is a series of chemical reactions in which one reaction leads to the next. It is a set of chemical reactions that takes place one after another in the same order. Reaction sequences can involve single or multiple reactions, and the reactions can be either in the same container or in separate containers. In a reaction sequence, each reaction is dependent on the product of the previous reaction, which then acts as the reactant for the next reaction.

B. There is no chiral center present in the structure, so no configuration needs to be shown.

To learn more about reaction sequence
https://brainly.com/question/22711879
#SPJ4

For the reaction :2MnO₂   + 4KOH  + O₂ + Cl₂   --->  2KmNO₄   +  2KCl   +  H₂O , the limiting reagent in the reaction is MnO₂.

The reaction is given as :

2MnO₂   + 4KOH  + O₂ + Cl₂   --->  2KmNO₄   +  2KCl   +  H₂O

Mass of the MnO₂ = 100 g

Moles of the MnO₂ = mass / molar mass

                                = 100 / 86.93

                                = 1.15 mol

Moles of the KOH = mass / molar mass

                              = 100 / 56.10

                              = 1.78 mol

Moles of the  O₂ = 100 / 32

                            = 3.12 mol

Moles of the Cl₂ = 100 / 70.90

                            = 1.41 mol

Thus, it is clear that the limiting reagent is MnO₂.

To learn more about limiting reagent here

https://brainly.com/question/22076723

#SPJ4

The average rate is 7.14*10-5 M/s in units

The instantaneous rate of the reaction at t = 800 s can be determined by taking the derivative of the concentration of the reactant or product = 800 s.t with respect to time at that specific point.

However, we don't have an equation describing the relationship between the concentration and time, so we can't calculate the derivative. Instead, we can approximate the instantaneous rate by using the average reaction rate over a small interval of time that includes t=800s.

Using the average rate between 500 and 1200 is a good approximation of the instantaneous rate at t = 800. The average rate is 7.14*10-5 M/s in units. 

Learn more about average:

https://brainly.com/question/27646993

#SPJ4

The position on the potential energy diagram that corresponds to this reaction would be the transition state.

A reaction is a response or an action that is taken in response to a stimulus. Physical, chemical, or psychological reactions are all possible. Physical reactions include movements, such as reflexes, and involve the body’s muscles, nerves, and other tissues. Chemical reactions involve the transformation of matter from one form to another and can be used to create new substances or break down existing ones. Psychological reactions involve emotions, thoughts, and behavior, and are often the result of a person’s response to an event or situation. All reactions involve changes in the environment of the individual or group and can involve both positive and negative responses.

To learn more about reaction
https://brainly.com/question/11231920
#SPJ4

-205.7 kJ The final enthalpy will be:The enthalpy of the second intermediate equation is halved and has its sign changed.

The entropy of reaction (Hrxn) for a chemical reaction is indeed the differential in enthalpy between the products and reactants; Hrxn is measured in kilojoules per mole.

A change inside the enthalpy of the a reaction that takes place at constant pressure is known as the Reaction Heat (also known as the Enthalpy of Reaction).It is a thermal measurement unit that can be used to determine how much energy is released or created per mole during a reaction.

To know more about chemical reaction visit:

https://brainly.com/question/29039149

#SPJ4

In two moles of NH3, there are 12.04 × 10²³ molecules. Ammonia is a gas that is colorless, extremely unpleasant to breathe, and causes choking.

Concentrations exceeding 5000 ppm typically result in abrupt respiratory arrest, while concentrations between 2500 and 4500 ppm can be lethal in about 30 minutes. Skin injury can be induced by anhydrous ammonia at concentrations higher than 10,000 parts per million.

80% of the ammonium produced by businesses is employed as fertilizer for agriculture. Ammonia is also used to create polymers, explosives, textiles, pesticides, dyes, and other compounds in addition to its various applications.

6.02×10²³ atoms, molecules

one mole NH₃

= 6.02×10²³ molecules

= 2 × (6.02×10²³ )

= 12.04 × 10²³ molecules.

To know more about ammonia visit:

https://brainly.com/question/1432685

#SPJ1

After mixing each of the following pairs of solutions, ions remain in the mixture, unreacted:

a. potassium ions and sulphate ions

b. lead ions and sulphide ions

c. ammonium ions and chloride ions

An ion is a positively or negatively charged atom or molecule. The charge of an electron is considered negative by convention, and this charge is equal to and opposite to the charge of a proton, which is considered positive. An ion is a chemical species with a significant positive or negative charge. The term 'ion' can refer to any atom or molecule with a net charge greater than zero. An ion is a positively charged atom or group of atoms. Cations are positively charged ions. Anions are negatively charged ions. Many normal substances exist in the body as ions.

Here,

After mixing each of the following pairs of solutions, ions remain unreacted in solution.

potassium ions and sulfate ions

lead ions and sulfuride ions

ammonium ions and chloride ions

To know more about ions,

https://brainly.com/question/4489490

#SPJ4

Cr(NO) is a non-reactive solution. The most basic solution is NH4Cl. NaI is a weakly acidic solution.

A chemical compound is a substance made of numerous identical molecules joined by chemical bonds and containing atoms from various chemical elements. Therefore, a molecule composed entirely of one element's atoms is not a compound. a material made up of two or more different elements joined chemically. Compounds include things like water (H2O), which is created from the elements hydrogen and oxygen, and table salt (NaCl), which is created from the elements sodium and chloride. A substance made up of two or more constituents is called a compound. Water, carbon dioxide, and table salt are examples of compounds.

Here,

Cr(NO) is neutral solution. NH₄Cl is basic solution. NaI is acidic solution.

To know more about compound,

brainly.com/question/24002733

#SPJ4

CH4 methane gas has recently increased in the mesosphere, creating a rise in water vapor which has led to the formation of high-altitude clouds that are visible at night.

Methane is the second most important anthropogenic greenhouse gas, contributing approximately 20% of the 2.5 W m-2 increase in radiative forcing due to human activities (IPCC (2001)). CH4 also plays a central role in global atmospheric chemistry, affecting tropospheric OH concentrations and acting as a source of stratospheric water vapor. The increase in the total methane burden can be linked qualitatively to increases in human activities that emit methane.

The comparison to high-frequency observations of methane is generally straight forward because observations and model output frequency are similar. The model to flask comparison is more difficult due to the low sampling frequency of flasks; we test two methods of generating monthly means for flask comparison.

To know more about methane here

https://brainly.com/question/25649765

#SPJ4

For the following electrochemical cell Co(s)|Co2 (aq.), 0.0155 m)||ag + (aq.), 3.50 m)|ag(s), the net cell equation Co(s) + [tex]Ag^{+}[/tex](aq.) → 2Ag(s) + [tex]Co^{+2}[/tex](aq.).

An electrochemical cell is a structure that can use electrical energy to assist chemical reactions inside of it or create electrical energy from those reactions. These gadgets can change chemical energy into electricity or vice versa.

Electrochemical cells are necessary in modern society, especially for energy storage. Electrochemical cells, including such batteries, can store energy from erratic energy sources like the sun and wind on a large scale.

To know more about electrochemical cells visit :

https://brainly.com/question/23631454

#SPJ4

Iron atoms are changed into iron(iii) ions during the rusting process. By gaining three electrons, iron atoms are oxidized.

 In contrast to neutrons and protons which are found inside the atom's nucleus, electrons are discovered outside the nucleus. Negative electrons are drawn to the positive nucleus because their opposing electric charges attract one another.

Quarks are the building blocks of protons, neutrons, but not electrons. As far as we could tell, quark and electrons are pure particles, not subatomic components.

To know more about electrons visit:

https://brainly.com/question/28977387

#SPJ4

There's some characteristic that can distinguish between a strong and weak electrolyte:

1. in strong electrolyte when in aqueous solution, it totally dissociates into ions while  weak electrolyt, in an aqueous solution, it partially dissociates into ions.

2.In strong electrolyte most free ions are present in the solution. while weak electrolyte both free ions and undissociated molecules can be found in its solution.

3. strong electrolyte concentration of ions in the solution is extremely high.

while in weak electrolyte Ion concentration in the solution is low.

4. Strong electrolyte  has high electrical conductivity while weak electrolyte  has some electrical conductivity.

An electrolyte splits into ions when it is dissolved in a solvent like water (or any other conductive species). Because of this, two or more moles of conductive species always result from the dissolution of one mole of electrolyte. As a result, when an electrolyte is dissolved in a solvent, the colliding characteristics of the electrolytes change significantly.

For instance, the following generic equation can be used to describe variations in freezing point and boiling point:

Tb = Kbm, and Tfz = Kfm.

Tfzeeze stands for freezing point depression and Tb for boiling point elevation. The freezing point depression constant is Kf, and the boiling point elevation constant is Kb. The solution's molarity is given by m. The aforementioned equations are adjusted as follows for electrolytic solutions:

iKbm for Tb and iKfm for Tfz

I stands for the Van't Hoff factor, an ion multiplier. The number of moles of ions provided by an electrolyte is equal to this factor. Therefore, the amount of ions released by an electrolyte during its dissolution in a solvent can be used to calculate the Van't Hoff factor. Van't Hoff factor values for NaCl and CaCl2, respectively, are 2 and 3, respectively.

Learn more about electrolyte at https://brainly.com/question/19340043

#SPJ4

Proteins are made up of amino acids that join together to form long chains.

Proteins are the key waged molecules and building blocks in all cells. You can expect of a protein as a string of beads in which each bead is an amino acid. There are 20 amino acids that help form the thousands of dissimilar proteins in your body. DNA is first interpreted into RNA, then RNA is translated into protein.

The contractile parts of muscles are the proteins actin and myosin. When these proteins are tonic by a nerve impulse they slide across each other, producing a shortening of the muscle cell. The building blocks of proteins are smaller organic molecules called amino acids

So we can conclude that Proteins are compound molecules and do most of the work in cells.

Learn more about Proteins here: https://brainly.com/question/884935

#SPJ1

The Ka for hypochlorous acid is  0.841 x 10^-8 whose pH of 0.10M HOCl is 4.23 is and its pKa for this acid is 8.075.

Given pH of  hypochlorous acid (HOCl) = 4.23

The concentration of [HOCl] = 0.10M

We know that HOCl is dissociated as follows:

HOCl <==> H+ + ClO-

Ka = [H+] [ClO-]/[HOCl]

Let the concentration of [H+] and [ClO-] be x. Then,

Ka = (x)(x) / 0.10

We know that pH = -log([H+])

[H+] = 10^-4.23 = 0.000058M = 0.58 x 10^-4M

Ka = (0.58x10^-4) * (0.58 x 10^-4) / 0.40 = 0.841 x 10^-8

Then pKa = -log(Ka)

pKa = -log(0.841 x 10^-8) = 8.075

Hence the required Ka and pKa of hypochlorous acid are 0.841 x 10^-8 and 8.075 respectively.

To learn more about pKa click here https://brainly.com/question/14906539

#SPJ4

An atom is the submicroscopic particle that constitutes the fundamental building block of ordinary matter.

Everything that takes up space and has mass is considered to be matter. Atoms are the minuscule constituents of matter. Therefore, these atoms are thought of as the fundamental units of matter. They are frequently referred to as subatomic particles because they are what make up atoms. There are three subatomic particles: protons, neutrons, and electrons.

Atoms are the basic building blocks of matter and make up all matter at its most basic level. These atoms frequently come together to create molecules, which are made up of two or more atoms connected to one another in particular geometric configurations.

Learn more about atom here:

brainly.com/question/1566330

#SPJ4

Lithium-6 (6.0g/mol) makes up 30 atoms, while lithium-7 (7.0g/mol) makes up 370 atoms. The average atomic mass of lithium is 0.9750 g/mol.

The average atomic mass of a sample of atoms can be calculated by taking into account the relative abundance of each isotope present in the sample and their individual atomic masses.

In this case, there are 30 atoms of lithium-6 (6.0 g/mol) and 370 atoms of lithium-7 (7.0 g/mol) in the sample of 400 lithium atoms.

To find the average atomic mass, we need to calculate the weighted average of the atomic masses of the two isotopes, using the formula:

average atomic mass = (mass of isotope 1 x % abundance of isotope 1) + (mass of isotope 2 x % abundance of isotope 2) + ...

Where % abundance = (number of atoms of isotope / total number of atoms) * 100

so for the given sample:

average atomic mass = (6.0 g/mol x (30/400)) + (7.0 g/mol x (370/400))

= (0.0375 g/mol) + (0.9375 g/mol)

= 0.9750 g/mol

Therefore, the average atomic mass of lithium in this sample is 0.9750 g/mol.

To know more about atoms please refer: https://brainly.com/question/11996848

#SPJ4

The most likely name of the compound is hexane.

The empirical formula of a hydrocarbon is CH2, which corresponds to a compound made of Carbon and Hydrogen atoms. The molecular weight of the compound is 70, which means that the compound is composed of 6 Carbon atoms and 14 Hydrogen atoms. The hydrocarbon compound with 6 Carbon atoms is hexane. The molecular formula of hexane is C6H14.

Hexane is a hydrocarbon with six carbon atoms in a straight chain, it is a colorless liquid that is widely used as a solvent and in the production of various industrial and consumer products.

It's important to note that the empirical formula gives the simplest whole number ratio of atoms in a compound and the molecular formula gives the actual number of atoms in a compound.

To know more about Hexane click below:

https://brainly.com/question/863881#

#SPJ4

The average atomic mass of gallium if 60.00% of its atoms have a mass of 68.926 amu and 40.00% have a mass of 70.925 amu is 69.73 amu.

Average atomic mass is the weighted average of the atomic masses of the naturally occurring isotopes of an element.

The average atomic mass of a substance can be calculated by multiplying the percentage abundance of each isotope by its atomic mass.

According to this question, 60.00% of Gallium atom have a mass of 68.926 amu and 40.00% have a mass of 70.925 amu. The average atomic mass can be calculated as follows:

Average atomic mass = (0.60 × 68.926) + (0.40 × 70.925)

Average atomic mass = 41.3556 + 28.37 = 69.73 amu

Therefore, 69.73 amu is the average atomic mass of the substance.

Learn more about average atomic mass at: https://brainly.com/question/13753702

#SPJ1

A decrease of pH by 3 implies :C) The OH- concentration decreases by a factor of 1000.

pH is a scale used to determine the hydroxide ion (OH–) concentration in a solution. It is equal to the negative log of hydrogen ion (H+) concentration and is also equal to the negative log of hydroxide ion (OH– ) concentration. As the pH of a solution increases by one pH unit,  concentration of OH- increases by ten times.

When the value of pOH is less than 7, then it is considered basic and therefore there are more OH- than H+ in the solution. At pH 7, the substance is at neutral and means that the concentration of H+ and OH- ion is same. If pH < 7, then solution is acidic.

To know more about pH, refer

https://brainly.com/question/172153

#SPJ4