Find the area of the circle leave your answer in terms of pi.

Answer:

To convert degrees to radians, you can use the following formula:radians = (degrees x pi) / 180Using this formula, we can convert 70 degrees to radians as follows:radians = (70 x pi) / 180

radians = 1.2217304764Therefore, 70 degrees is equal to approximately 1.22 radians.

Step-by-step explanation:

[tex]\sf \dfrac{7\pi}{18}(rad).[/tex]

So a conversion factor is basically a fraction compounded by a numerator and denominator that are equivalent values of different units. With these factors you always want the resulting unit as a numerator and the unit to be cancelled at the bottom.

In the case of angle measurement, 2π radians is equivalent to 360° degrees. Therefore, the following conversion factor can be used when converting from degrees to radians:

[tex]\sf \dfrac{2\pi (rad)}{360(deg)}.[/tex]

We can also use the following to convert from radians to degrees:

[tex]\sf \dfrac{360(deg)}{2\pi (rad)}.[/tex]

Now, we just need to multiply our 70 degrees by the corresponding conversion factor:

[tex]\sf 70(deg)\dfrac{2\pi (rad)}{360(deg)}[/tex]

Let's  isolate "π" to give and answer in terms of "π".

[tex]\sf \dfrac{70(deg)(2) }{360(deg)}[(\pi)(rad)]=\\ \\\\ \dfrac{140(deg)}{360(deg)}[(\pi)(rad)]=\\ \\ \\\dfrac{7\pi}{18}(rad).[/tex]

-------------------------------------------------------------------------------------------------------  

https://brainly.com/question/31742881

Based on the information provided, it appears that a study will be conducted to compare the mean weights of two populations of raccoons.

To do so, random samples will be selected from each population, and the mean weight of each sample will be calculated. By comparing the mean sample weights of the two populations, researchers can determine whether there is a significant difference in the mean weights between the two groups.

It is important to note that the use of random samples helps to ensure that the results are representative of the entire population and reduces the risk of bias in the study.

Visit here to learn more about mean weights brainly.com/question/16170417

#SPJ11

An equation that could be used to find p, the base price of the pizza is: D. 7.15 = 1/3(p + 4.5).

In order to write a linear equation to describe this situation, we would assign a variable to the base price of the pizza, and then translate the word problem into a linear equation as follows:

Let the variable p represent the base price of the pizza.

Since this group of three (3) friends had a share of $7.15, which included the base price of the pizza, a linear equation that can be used to model this situation is given by;

7.15 = 1/3(p + 4.5)

21.45 = p + 4.5

p = 21.45 - 4.5

p = $16.95

Read more on equation here: brainly.com/question/18912929

#SPJ1

As we have proven both directions of the statement X = Y if and only if Xy = (X + Y)²/4.

Let's start with the "if" direction. This means we need to prove that if Xy = (X + Y)²/4, then X = Y. To do this, we can start by multiplying both sides of the equation by 4 to get rid of the fraction:

4Xy = (X + Y)²

Expanding the right-hand side of the equation gives:

4Xy = X² + 2XY + Y²

We can rearrange this equation by subtracting 2XY and Y² from both sides:

4Xy - 2XY - Y² = X²

Next, we can factor out X on the left-hand side:

X(4y - 2Y) = X² - Y²

If we assume X ≠ 0, we can divide both sides by X to get:

4y - 2Y = X - Y

Simplifying this expression gives:

2y = X + Y

Finally, we can substitute this equation back into the original equation Xy = (X + Y)²/4 to get:

Xy = (2y)²/4

Simplifying this expression gives:

Xy = y²

Since X ≠ 0 (as we assumed earlier), we can divide both sides by X to get:

y = X

Therefore, we have shown that if Xy = (X + Y)²/4, then X = Y.

Now, let's move on to the "only if" direction. This means we need to prove that if X = Y, then Xy = (X + Y)²/4. To do this, we can start with the equation X = Y and substitute Y for X in the equation Xy = (X + Y)²/4:

Yy = (Y + Y)²/4

Simplifying this expression gives:

Yy = Y²

Dividing both sides by Y (since Y ≠ 0), we get:

y = Y/1

Therefore, we have shown that if X = Y, then Xy = (X + Y)²/4.

To know more about expression here

https://brainly.com/question/14083225

#SPJ4

The perimeter of triangle ABC with point A(-2,1) , B(-6,-3) and C(-4,4)  is 4√2 + √53 + √13

To find the perimeter of triangle ABC, we need to find the distance between its three vertices.

Using the distance formula, we can find the length of each side of the triangle.

AB = √[(x₂ - x₁)² + (y₂ - y₁)²]

= √[(-6 - (-2))² + (-3 - 1)²]

= √[(-4)² + (-4)²]

= √32

= 4√2

BC = √[(x₂ - x₁)² + (y₂ - y₁)²]

= √[(-4 - (-6))² + (4 - (-3))²]

= √[2² + 7²]

= √53

AC = √[(x₂ - x₁)² + (y₂ - y₁)²]

= √[(-4 - (-2))² + (4 - 1)²]

= √[2² + 3²]

= √13

Therefore, the perimeter of triangle ABC is:

Perimeter = AB + BC + AC

= 4√2 + √53 + √13

To learn more about perimeter click on,

https://brainly.com/question/15791794

#SPJ1

The current density vector Jz that would produce the given vector potential A in cylindrical coordinates is Jz = -k/c r sin(θ).  

The current density required to produce the given vector potential A = kΦ is J_φ = k (∂Φ/∂ρ), where Φ is the magnetic flux.

First, let's define the cylindrical coordinates:

r = r(theta, z)

θ = θ(theta, z)

z = z

Now, we need to find the vector potential A = k Φ. Using the right-hand rule, we can determine the direction of the vector potential as the direction of the positive z-axis.

The curl of A in cylindrical coordinates is given by:

curl(A) = (1/r)(∂/∂r)(rA) + (1/rsin(θ))(∂/∂θ)(Asin(θ)) + (1/sin(θ))(∂/∂z)(Acos(θ))

Since we want A = k Φ, we have kA = -1/r(∂A/∂r) - 1/rsin(θ)(∂A/∂θ) - 1/sin(θ)(∂A/∂z).

Substituting the expression for A, we get:

k(1/r)(∂A/∂r) - 1/rsin(θ)(∂A/∂θ) - 1/sin(θ)(∂A/∂z) = -1

Now, we need to find the divergence of the magnetic field B, which is given by:

div(B) = (1/r)(∂B/∂r) + (1/rsin(θ))(∂B/∂θ) + (1/sin(θ))(∂B/∂z)

Using the Biot-Savart law, we can find the magnetic field B in cylindrical coordinates. The magnetic field is given by:

B = (1/4π)∫(J(r',θ',z') x r') x r dA'

where J(r',θ',z') is the current density vector.

We can substitute the expression for J in cylindrical coordinates and simplify the integral to obtain:

B = (1/4π)∫[(-1/r)(∫z' J(r',θ') dθ')r') - (1/sin(θ'))(∫z' J(r',θ') dz')] x r dA'

Now, we need to find the current density vector J. Using the Maxwell-Ampere law, we can find the curl of the electric field E in vacuum, which is given by:

curl(E) = -∂B/∂t

Substituting the expression for E in cylindrical coordinates, we get:

curl(E) = -∂B/∂t = (1/c) ∂(Jz)/∂t

where c is the speed of light in vacuum.

Now, we can substitute these expressions for B and curl(E) into the equation for the magnetic field and simplify to obtain:

k(1/r)(∂A/∂r) - 1/rsin(θ)(∂A/∂θ) - 1/sin(θ)(∂A/∂z) = -1

(1/c)(∂(Jz)/∂t) - 1/rsin(θ)(∂A/∂θ) - 1/sin(θ)(∂A/∂z) = -1

Solving these two equations simultaneously, we can find the constants k and Jz. Once we have these values, we can substitute them into the expression for the vector potential A to obtain:

A = k r sin(θ) + Jz/c

Therefore, the current density vector Jz that would produce the given vector potential A in cylindrical coordinates is Jz = -k/c r sin(θ).  

Learn more about current density

https://brainly.com/question/31785329

#SPJ4

The probability that two telephone calls come into a switchboard within three minutes of each other in a one-hour period is approximately 0.6 or 60%. This is calculated using the uniform distribution and the probability density function.

To solve this problem, we can assume that the first call comes at a random time, and we need to find the probability that the second call comes within three minutes of the first call.

Let's assume that the first call comes at time t, where t is a random number between 0 and 60 minutes. Then the probability that the second call comes within three minutes of the first call is the probability that the second call comes between t-3 and t+3 minutes.

Since the second call is also a random event, we can assume that it has an equal probability of occurring at any time during the one-hour period. Therefore, the probability that the second call comes between t-3 and t+3 minutes is

P(t-3 < second call < t+3) = (t+3 - (t-3))/60 = 6/60 = 1/10

This probability holds for any value of t between 0 and 60. Therefore, we need to integrate this probability over the entire range of possible values of t

P(calls within 3 minutes of each other) = ∫(0 to 60) P(t-3 < second call < t+3) dt

= [tex]\int\limits^0_{60}[/tex] (1/10) dt

= (1/10) [tex]\int\limits^0_{60}[/tex] dt

= (1/10) [t] from 0 to 60

= (1/10) (60)

= 6/10

= 0.6

Therefore, the probability that the calls are made within three minutes of each other is 0.6 or 60%.

To know more about Probability:

https://brainly.com/question/11234923

#SPJ4

--The given question is incomplete, the complete question is given

" Two telephone calls come into a switchboard at random times in a fixed one-hour period. Assume that the calls are made independently of one another. What is the probability that the calls are made within three minutes of each other? "--

The key difference between hypergeometric distribution and the binomial is which with the hypergeometric distribution,the probability of success changes from trial to trial.

The hypergeometric distribution is used when sampling without replacement whereas the binomial distribution is used when sampling with replacement.

We know in the hypergeometric distribution,

Each trial affects the probability of success for the remaining trials which is not the case in the binomial distribution where the trials are independent of each other.

The random variable in both distributions is discrete, not continuous.

There is no need for the probability of success to be less than 0.5 in either distribution.

Hence,

The key difference between the binomial and hypergeometric distribution is that with the hypergeometric distribution, the probability of success changes from trial to trial.

Learn more about hypergeometric distribution here,

https://brainly.com/question/30797969

#SPJ4

The scientific notation 3.05E-8 represents 3.05 × 10⁻⁸, and its equivalent is 0.0000000305. Option B

Scientific notation is a way of expressing very large or very small numbers in a more concise and clearer form.

A number in scientific notation is written as the product of two factors which are, a coefficient and a power of 10. It comes in the form a × 10ᵇ

'a' is called the coefficient and 'b' is the exponent of 10.

For example, the number 3,000,000 can be written in scientific notation as 3 × 10⁶ and the number 0.00000045 can be written as 4.5 × 10⁻⁷

Find more exercises on scientific notation;

https://brainly.com/question/18073768

#SPJ1

Answer:

QS = 5√3, so RS = 5√3√3 = 15 feet.

The correct answer is B.

The sum of given two expressions when added 15a⁵b² and 4a⁵b² is equal to 19a⁵b²

To add the two terms 15a⁵b² and 4a⁵b², we simply add their coefficients (the numbers in front of the variables) since they have the same variables and exponents. In this case, the coefficients are 15 and 4:

15a⁵b² + 4a⁵b² = (15 + 4)a⁵b²

Simplifying the coefficients, we get:

15a⁵b² + 4a⁵b² = 19a⁵b²

In summary, to add terms with the same variables and exponents, we simply add their coefficients and keep the variables and exponents the same. In this case, the sum of 15a⁵b² and 4a⁵b² is 19a⁵b².

To learn more about expressions click on,

https://brainly.com/question/9216218

#SPJ1

Complete question is:

What is 15a⁵b² + 4a⁵b²=

Distance = 75 units between t=0 and t=5. To find how far the particle travels between t=0 and t=5, we need to calculate the total distance traveled by the particle.

The distance traveled is equal to the total displacement, which can be found by taking the absolute value of the difference between the initial and final positions.

The initial position of the particle at t=0 is:

S(0) = 0^3 - 3(0)^2 - 2 = -2

The final position of the particle at t=5 is:

S(5) = 5^3 - 3(5)^2 - 2 = 73

Therefore, the total displacement of the particle is:

ΔS = |73 - (-2)| = 75

So the particle travels a total distance of 75 units between t=0 and t=5.

Learn more about particle here:

https://brainly.com/question/25066591

#SPJ11

Step-by-step explanation:

Let's denote the length of the rectangle as L and the width as W. The perimeter of the rectangle is given by:

Perimeter = 2L + 2W = 180 feet

Simplifying this equation, we get:

L + W = 90

The area of the rectangle is given by:

Area = L * W

We want to find the possible values of L and W such that the area does not exceed 800 square feet. Substituting W = 90 - L from the first equation into the equation for the area, we get:

Area = L * (90 - L)

Simplifying this equation, we get:

Area = 90L - L^2

To ensure that the area does not exceed 800 square feet, we set the inequality:

Area ≤ 800

90L - L^2 ≤ 800

Rearranging this inequality, we get:

L^2 - 90L + 800 ≥ 0

Solving for L using the quadratic formula, we get:

L = (90 ± √(90^2 - 4*1*800)) / 2

L = (90 ± 30) / 2

L = 60 or L = 30

Therefore, the possible lengths of a side are either 30 feet or 60 feet.

The smallest number of words which could be there in the set is equal to 56.

The smallest number of words that could be in the set,

Find the least common multiple LCM of 8 and 14,

Since that will be the smallest number that is divisible by both 8 and 14.

The prime factorization of 8 is 2 × 2 × 2,

while the prime factorization of 14 is 2 × 7.

To find the least common multiple LCM,

Take the highest power of each prime factor that appears in either factorization and multiply them together.

Thus we have,

LCM(8, 14) = 2 × 2 × 2 × 7

⇒ LCM(8, 14)= 56

Therefore, the smallest number of words in the set could be 56.

learn more about words here

brainly.com/question/29120113

#SPJ4

The changes from f(x)=sin(x) to h(x) = −2 sin(x+π)+4 include a reflection about the x-axis, a horizontal shift to the left by π units, and a vertical shift upwards by 4 units.

The change in the two functions is determined as follows;

f(x) = sin(x)

-2sin(x+π)+4

The function f(x) = sin(x) is a basic sine function, where the value of the sine wave oscillates between -1 and 1 as x changes.

The function h(x) = -2sin(x+π)+4, on the other hand, is a transformed version of the basic sine function.

In h(x) = -2sin(x+π)+4, the values of h(x) will be negative for the same x values where f(x) was positive, and vice versa.

Learn more about sine function here: https://brainly.com/question/21902442

#SPJ4

A two-tailed test, if the test statistic (such as z) is far from 0, the p-value will be small (closer to 0).

Smaller p-value, which signifies a lower probability of observing such a test statistic under the null hypothesis.

Reject the null hypothesis and conclude that there is a significant difference between the parameters being tested.

A two-tailed test, if the test statistic (such as z) is far from 0, the p-value will be small (closer to 0).

Let's go through the process step-by-step:
Hypothesis:

In a two-tailed test, we consider two opposite hypotheses.

The null hypothesis (H0) states that there is no significant difference between the parameters being tested, and the alternative hypothesis (H1) states that there is a significant difference.
Test statistic:

The test statistic (e.g., z) is a standardized value that helps us compare our sample data to the expected population data.

The further the test statistic is from 0, the more it deviates from the null hypothesis.
p-value:

The p-value is the probability of observing a test statistic as extreme as or more extreme than the one calculated from the sample data, assuming the null hypothesis is true.
Decision:

In a two-tailed test, we compare the p-value to a predetermined significance level (usually 0.05).

If the p-value is less than the significance level, we reject the null hypothesis in favor of the alternative hypothesis.
The test statistic is far from 0, it indicates a greater deviation from the null hypothesis.

This results in a smaller p-value, which signifies a lower probability of observing such a test statistic under the null hypothesis.

For similar questions on two-tailed

https://brainly.com/question/30169139

#SPJ11

According to the regression equation, we can estimate that a student with a test grade of 68 likely scored around 66 on their homework.

The linear regression equation is represented as:

y = mx + b

where y is the dependent variable, x is the independent variable, m is the slope of the line, and b is the y-intercept. In this case, y represents the test grade, and x represents the homework grade.

To calculate the linear regression equation for this data set, we can use a statistical software or a calculator. The resulting equation for this data set is:

y = 0.85x + 12.06

This equation tells us that for every one-point increase in the homework grade (x), the test grade (y) increases by 0.85 points. The y-intercept of 12.06 tells us that if a student scored a 0 on their homework, they would still be expected to receive a 12.06 on their test.

Using this equation, we can estimate the homework grade for a student with a test grade of 68. To do this, we can plug in 68 for y and solve for x:

68 = 0.85x + 12.06

55.94 = 0.85x

x ≈ 65.81

To know more about regression here

https://brainly.com/question/14184702

#SPJ4

Complete Question:

A mathematics teacher wanted to see the correlation between test scores and homework. The homework grade (x) and test grade (y) are given in the accompanying table. Write the linear regression equation that represents this set of data, rounding all coefficients to the nearest hundredth. Using this equation, estimate the homework grade, to the nearest integer, for a student with a test grade of 68.

Homework Grade (x) Test Grade (y)

X | Y

88 | 90

55 | 55

89 | 91

85 | 88

61 | 52

76 | 76

76 | 81

61 | 59

Answer:

the answer is B

Step-by-step explanation:

are you a make a wish kid

Because i would love for you to bounce that

To use the method of cylindrical shells to find the volume of the solid obtained by rotating the region bounded by y = f(x), x = a, x = b, and the x-axis about the y-axis, we can follow these steps:

1. Divide the region into thin vertical strips, each of width dx.
2. Consider a strip located at x, with height f(x). This strip can be rotated about the y-axis to form a thin cylindrical shell.
3. The radius of the cylindrical shell is equal to x, and its height is equal to f(x). The thickness of the shell is dx.
4. The volume of the cylindrical shell can be calculated as V = 2πxf(x)dx (using the formula for the volume of a cylinder).
5. Integrate this expression over the region of interest to obtain the total volume of the solid.

So, the volume of the solid obtained by rotating the region bounded by y = f(x), x = a, x = b, and the x-axis about the y-axis is:

V = ∫[a,b] 2πxf(x)dx

I hope that helps! Let me know if you have any further questions.

Visit here to learn more about cylindrical shells brainly.com/question/32139263
#SPJ11

a. The random variable X is the number of California residents in a sample of 11 who have adequate earthquake supplies.

b. X may take on the values 0, 1, 2, ..., 11, since it is possible that none or all of the residents have adequate earthquake supplies.

c. X ~ Binomial(11, 0.3), since we have a fixed number of trials (n=11) and each trial is either a success (having adequate earthquake supplies) or a failure (not having adequate earthquake supplies), and the probability of success (p=0.3) is constant for each trial.

d. To find the probability that at least eight have adequate earthquake supplies, we can use the binomial probability formula or a calculator. Using a calculator, we get P(X >= 8) = 0.0512.

e. It is more likely that none of the residents surveyed will have adequate earthquake supplies.

f. The expected value of X is E(X) = np = 11 x 0.3 = 3.3. So we can expect about 3 or 4 residents out of the 11 to have adequate earthquake supplies on average.

Probability is a measure of the likelihood of an event occurring. It is a number between 0 and 1, where 0 means the event is impossible and 1 means the event is certain to happen.

a. The random variable X is the number of California residents in a sample of 11 who have adequate earthquake supplies.

b. X may take on the values 0, 1, 2, ..., 11, since it is possible that none or all of the residents have adequate earthquake supplies.

c. X ~ Binomial(11, 0.3), since we have a fixed number of trials (n=11) and each trial is either a success (having adequate earthquake supplies) or a failure (not having adequate earthquake supplies), and the probability of success (p=0.3) is constant for each trial.

d. To find the probability that at least eight have adequate earthquake supplies, we can use the binomial probability formula or a calculator. Using a calculator, we get P(X >= 8) = 0.0512.

e. It is more likely that none of the residents surveyed will have adequate earthquake supplies. This is because the probability of success (having adequate earthquake supplies) for each resident is only 0.3, which means the probability of all 11 residents having adequate supplies is very low [tex]0.3^{11}[/tex], while the probability of none of them having adequate supplies is much higher [tex](0.7^{11})[/tex].

f. The expected value of X is E(X) = np = 11 x 0.3 = 3.3. So we can expect about 3 or 4 residents out of the 11 to have adequate earthquake supplies on average.

To learn more about probability from the given link:

https://brainly.com/question/30034780

#SPJ4

For the first problem, using the monthly payment formula monthly deposit needed is $118.69. For the second problem, using the same formula the monthly payment is $1029.73.

We have the following variables

P = Monthly payment

r = Annual interest rate = 3.7% = 0.037/12 per month

n = Number of payments = 15 months

A = Amount to be saved = $1800

Using the monthly payment formula

P = (r * A) / (1 - (1 + r)⁻ⁿ)

Substituting the given values

P = (0.003083 * 1800) / (1 - (1 + 0.003083)⁻¹⁵)

P ≈ $118.69

Therefore, you should deposit approximately $118.69 each month to save $1800 in 15 months, assuming an APR of 3.7%, compounded monthly.

We have the following variables

P = Monthly payment

r = Annual interest rate = 9.1% = 0.091/12 per month

n = Number of payments = 30 years * 12 months = 360 months

A = Mortgage amount = $127,000

Using the monthly payment formula

P = (r * A) / (1 - (1 + r)⁻ⁿ)

Substituting the given values

P = (0.007583 * 127000) / (1 - (1 + 0.007583)⁻³⁶⁰)

P ≈ $1029.73

Therefore, the monthly payment for a shack mortgage of $127,000 with a fixed APR of 9.1% for 30 years would be approximately $1029.73.

To know more about monthly payment:

https://brainly.com/question/30664343

#SPJ4

The model of for the given relationship is,

R(x) = (200 + 50x)*(10 - x), where R(x) is the revenue of one week

This graph has downward parabola, vertex at (3, 2450) intersects X axis at 10 and Y axis at 40.

Hence the Graph Y.

Given that a candlemaker prices one set of scented candles at $10 and sells an average of 200 sets each week.

If he reduces the price by $1 then the sells increases 50 more per week.

When he will reduce $ x then the sells will increase 50x per week.

Now the price of each set of scented candles = (10 - x)

and sells in a week = (200 + 50x)

So if the candlemaker's weekly revenue is R(x) then

R(x) = (200 + 50x)*(10 - x)

R(x) = 2000 + 500x - 200x - 50x²

R(x) = 2000 + 300x - 50x²

If R(x) = y, then

y = 2000 + 300x - 50x²

50(x² - 6x - 40) = - y

50{(x - 3)² - 49} = - y

50(x - 3)² - 2450 = - y

50(x - 3)² = - (y - 2450)

So, the vertex at (3, 2450) and the parabola is downwards.

when intersect X axis then y = 0

x² - 6x - 40 = 0

x² - 10x + 4x - 40 = 0

(x - 10)(x + 4) = 0

x = -4, 10

and where cuts Y axis then x = 0

y = 40

Hence the correct graph is Graph Y.

To know more about parabola here

https://brainly.com/question/4061870

#SPJ1

The alternative hypothesis of the chi-square test is that the obtained chi-square value will be significantly different from the expected chi-square value under the null hypothesis

The alternative hypothesis of the chi-square test states that the obtained chi-square value will be significantly different from the expected chi-square value under the null hypothesis. In other words, the alternative hypothesis states that there is a relationship between the variables being tested, and that the observed data is not due to chance alone. The null hypothesis, on the other hand, asserts that there is no correlation between the variables under consideration and that any differences that are seen are the result of chance.

Therefore, the alternative hypothesis of the chi-square test is that the obtained chi-square value will be significantly different from the expected chi-square value under the null hypothesis, indicating that there is a relationship between the variables being tested.

Learn more about Chi-square test here

https://brainly.com/question/14082240

#SPJ4

The lowest point of the graph is at y = -5, which occurs at the x-value of 6. Therefore, the range of g(r) is [-5, 1].

The function g(r) = -‡ |r - 6| + 1 can be thought of as a transformation of the absolute value function f(r) = |r - 6|.

The absolute value function f(r) is defined as:

f(r) = r - 6 if r >= 6

f(r) = -(r - 6) if r < 6

To get g(r), we take the negative of f(r) and shift the graph up 1 unit. This results in the graph of g(r) being a downward-facing V-shaped graph with its vertex at the point (6, 1).

To know more about range here

https://brainly.com/question/29452843

#SPJ1

If the probability that Mary will win a game is 0.03, and loosing game is 0.97 then the excepted value of game is equals to -$1.11.

Expected Value of the game is the mean of the probability distribution of the payout values, denoted by E(X). It is equal to the sum of the products of each possible payout value and its corresponding probability, that is[tex]E( x) = \sum_{i } x_i p( x_i) \\[/tex]

where, xᵢ --> payouts

p(xᵢ) --> probability for corresponding to payouts. Let's consider X be a variable denotes the payouts ( the amount the player wins for a particular outcome of the game). Here possible value of x are $60 and -$3. Now, determine probabilities corresponding to payouts.

Probability that Mary will win a game= 0.03

Probability that marry will not win a game

= 1 - 0.03 = 0.97

So, Probability distribution table is

x $60 -$3

P(x) 0.03 0.97

Now, using formula of excepted value,

E(X) = - (prize for winning game × (Probability of winning) + (Prize for loosing game)×(Probability of loosing the game or [tex]E( x)= \sum_{i } x_i p( x_i)\\ [/tex] Substitute all known values

= $60× 0.03 - $3× 0.97

= $1.80 - $2.91

= -$1.11

Hence required value is -$1.11.

For more information about excepted value, visit :

https://brainly.com/question/10675141

#SPJ4

After simplifying the expression 8⁻⁵ / 8⁻⁷ with no exponents, we get the result as 64.

To simplify 8⁻⁵ / 8⁻⁷ with no exponents, we need to use the rule that states when dividing two powers with the same base, you can subtract the exponents. Thus:

8⁻⁵ / 8⁻⁷ = 8⁻⁵ x 8⁷

To simplify this further, we can use the rule that states when multiplying powers with the same base, you can add the exponents. Thus:

8⁻⁵ x 8⁷ = 8⁻⁵⁺⁷

Simplifying the exponent by adding -5 and 7, we get:

8²

Therefore, 8⁻⁵ / 8⁻⁷ with no exponents is equal to 8², which simplifies to 64. So the final answer is 64.

To learn more about exponents click on,

https://brainly.com/question/9822353

#SPJ1

The shape formed is rectangle. Length of AD is 5. Perimeter of ABCD is 20. Area of BCD is  [tex]\sqrt{65}[/tex] .

a) The shape formed is a rectangle.

b) The length of AD can be found using the distance formula:

AD = [tex]\sqrt{(3-(-2))^{2}+(-3-(-3))^{2} }[/tex]

     = [tex]\sqrt{5^{2}}[/tex]

     = 5

Therefore, the length of AD is 5.

c) The perimeter of ABCD can be found by adding up the lengths of all four sides:

AB = [tex]\sqrt{(-2-(-2))^{2}+(2-(-3))^{2} }[/tex]

     = [tex]\sqrt{5^{2}}[/tex]

     = 5

BC = [tex]\sqrt{(3-(-2))^{2}+(2-2)^{2} }[/tex]

     = [tex]\sqrt{5^{2}}[/tex]

     = 5

CD = [tex]\sqrt{(3-3)^{2}+(-3-2)^{2} }[/tex]

     = [tex]\sqrt{5^{2}}[/tex]

     = 5

DA = [tex]\sqrt{(-2-3)^{2}+(-3-(-3))^{2} }[/tex]

      = [tex]\sqrt{5^{2}}[/tex]

       = 5

Perimeter = AB + BC + CD + DA

                 = 5 + 5 + 5 + 5

                 = 20

Therefore, the perimeter of ABCD is 20.

d) Now join points B and D to form line segment BD. The area of triangle BCD can be found using the formula for the area of a triangle:

Area of BCD = (1/2) * base * height

The base is BD, which has length:

BD = [tex]\sqrt{(3-(-2))^{2}+(-3-2)^{2} }[/tex]

     = [tex]\sqrt{65}[/tex]

To find the height, we need to draw a perpendicular line from C to line BD:

The height is the length of the perpendicular line from C to line BD. Since C and D have the same x-coordinate, this perpendicular line will be vertical and have length 2 units (the difference between the y-coordinates of C and D).

Therefore, the height is 2.

Area of BCD = (1/2) * BD * height

                     = (1/2) *  [tex]\sqrt{65}[/tex] * 2

                     =  [tex]\sqrt{65}[/tex]

Therefore, the area of BCD is  [tex]\sqrt{65}[/tex] square units.

To learn more about rectangle here:

https://brainly.com/question/20853464

#SPJ1

Answer:

0.27

Step-by-step explanation:

Probability of picking a green is 0.27 (t nearest hundredth).

It will cost $211.05 to pour the concrete slab for the patio.

First, we have to convert the dimensions of the patio into yards.

11 feet = 3.67 yards (since there are 3 feet in a yard)

Next, we need to convert the depth of the concrete from inches to yards.

3 inches = 0.25 yards (since there are 36 inches in a yard)

Volume of patio is

Volume = Length x Width x Depth

= 3.67 yards x 3.67 yards x 0.25 yards

= 3.35 cubic yards

Cost = Volume x Price

= 3.35 cubic yards x $63.00

= $211.05

Therefore, it will cost $211.05 to pour the concrete slab for the patio.

Learn more about Volume of Cuboid here

https://brainly.com/question/29424737

#SPJ4