Find the compound amount for the deposit. Round to the nearest cent. \( \$ 500 \) at \( 6 \% \) compounded quarterly for 3 years

Answers

Answer 1

The compound amount for a deposit of $500 at an interest rate of 6% compounded quarterly for 3 years is approximately $595.01.

To calculate the compound amount, we can use the formula:

[tex]A = P(1 + r/n)^{nt}[/tex]

Where:

A = Compound amount

P = Principal amount (initial deposit)

r = Annual interest rate (in decimal form)

n = Number of compounding periods per year

t = Number of years

In this case, the principal amount (P) is $500, the annual interest rate (r) is 6% (or 0.06 in decimal form), the compounding periods per year (n) is 4 (quarterly), and the number of years (t) is 3.

Substituting these values into the formula:

[tex]A = 500(1 + 0.06/4)^{4*3}\\\\A = 500(1 + 0.015)^{12}\\A = 500(1.015)^{12}\\A = 500(1.195618355)[/tex]

A =  $ 595.01

Therefore, the compound amount for a deposit of $500 at an interest rate of 6% compounded quarterly for 3 years is approximately $595.01, rounded to the nearest cent.

To learn more about Annual interest rate visit:

brainly.com/question/22336059

#SPJ11


Related Questions

Use the linear approximation (1 + x)^k = 1 + kx, as specified.
Find an approximation for the function f(x) = 2/(1-x) for values of x near zero. O f(x) = 1 + 2x
O f(x) = 1-2x
O f(x) = 2 - 2x
O f(x) = 2 + 2x

Answers

We take the first term of the power series expansion, which gives us the first-order linear approximation. Hence, option (D) is correct

The given function is f(x) = 2/(1 - x).

To find an approximation for the function f(x) = 2/(1-x) for values of x near zero, we will use the linear approximation (1 + x)^k = 1 + kx.

We will find the first-order linear approximation of the given function near x = 0.

Therefore, we have to choose k and compute f(x) = 2/(1-x) in the form kx + 1.

Using the formula, (1 + x)^k = 1 + kx to find the linear approximation of f(x), we have:(1 - x)^(–1)

= 1 + (–1)x^1 + k(–1 - 0).

Comparing this equation with the equation 1 + kx, we have: k = –1.

Therefore, the first-order linear approximation of f(x) isf(x) = 1 – x + 1 + x,

which simplifies to f(x) = 2.

Since the first-order linear approximation of f(x) near x = 0 is 2, we can conclude that the correct option is O f(x) = 2 + 2x

Hence, option (D) is correct.

Note: To get the first-order linear approximation, we first expand the given function into a power series by using the formula (1 + x)^k.

Then, we take the first term of the power series expansion, which gives us the first-order linear approximation.

To know more about linear visit:

https://brainly.com/question/31510530

#SPJ11

Look at the following conditionals: If it is not recess, then
Caleb is playing solitaire. If Caleb is playing solitaire, then it
is not recess. Is the second conditional the converse,
contrapositive,

Answers

The second conditional is the converse of the first conditional.The given conditionals are: If it is not recess, then Caleb is playing solitaire.

If Caleb is playing solitaire, then it is not recess.The second conditional is the converse of the first conditional.In logic, the converse of a conditional statement is obtained by interchanging the hypothesis and conclusion of the given conditional statement.

Therefore, if p → q is a given conditional statement, then its converse is q → p. In this case, the given first conditional statement is "If it is not recess, then Caleb is playing solitaire." Its converse is "If Caleb is playing solitaire, then it is not recess." Thus, the second conditional is the converse of the first conditional.

Learn more about converse from the given link

https://brainly.com/question/31918837

#SPJ11

Find the indefinite integral. Check your work by differentiation. ∫6x(9−x)dx ∫6x(9−x)dx=__

Answers

Therefore, the indefinite integral of ∫6x(9−x)dx is [tex]27x^2 - 2x^3 + C[/tex], where C is a constant.

To find the indefinite integral of ∫6x(9−x)dx, we can expand the expression and then integrate each term separately:

∫6x(9−x)dx = ∫[tex](54x-6x^2)dx[/tex]

Using the power rule for integration, we have:

∫54xdx =[tex](54/2)x^2 + C_1[/tex]

[tex]= 27x^2 + C_1[/tex]

∫[tex]-6x^2dx = (-6/3)x^3 + C_2 \\= -2x^3 + C_2[/tex]

Combining the results, we have:

∫6x(9−x)dx[tex]= 27x^2 - 2x^3 + C[/tex]

To check our work, we can differentiate the obtained result:

[tex]d/dx (27x^2 - 2x^3 + C) = 54x - 6x^2[/tex]

which matches the original integrand 6x(9−x).

To know more about indefinite integral,

https://brainly.com/question/31969670

#SPJ11

Find the number of units that must be produced and sold in order to yield the maximum profit given the equations below for reve R(x)=6xC(x)=0.01x2+1.3x+20​ A. 365 units B. 470 units C. 730 units D. 235 units

Answers

Therefore, to yield the maximum profit, 235 units must be produced and sold.

To find the number of units that must be produced and sold in order to yield the maximum profit, we need to consider the profit function. The profit function is given by subtracting the cost function from the revenue function.

Given:

Revenue function R(x) = 6x

Cost function [tex]C(x) = 0.01x^2 + 1.3x + 20[/tex]

The profit function P(x) is obtained by subtracting the cost function from the revenue function:

P(x) = R(x) - C(x)

[tex]= 6x - (0.01x^2 + 1.3x + 20)[/tex]

To find the maximum profit, we need to determine the value of x that maximizes the profit function P(x). We can do this by finding the critical points of P(x) and evaluating their second derivatives.

Taking the derivative of P(x) with respect to x:

P'(x) = 6 - (0.02x + 1.3)

Setting P'(x) equal to 0 and solving for x:

6 - (0.02x + 1.3) = 0

0.02x = 4.7

x = 235

To determine whether x = 235 corresponds to a maximum or minimum, we can take the second derivative of P(x).

Taking the second derivative of P(x) with respect to x:

P''(x) = -0.02

Since the second derivative P''(x) is negative for all x, the critical point x = 235 corresponds to a maximum.

To know more about maximum profit,

https://brainly.com/question/30887890

#SPJ11

Can you just do problems c and d please? Thank you very much
The vector \( \vec{A}=2 \tilde{a}_{s}-5 \tilde{a}_{a} \) is perpendicular to which one of the following vectors? a. \( 5 \tilde{a}_{x}+2 \bar{a}_{y}+2 a_{x} \) b. \( 5 \tilde{a}_{x}+2 \dot{a}_{y} \) c

Answers

Neither option (c) nor option (d) is perpendicular to \(\vec{A}\).

Given that the vector \( \vec{A}=2 \tilde{a}_{s}-5 \tilde{a}_{a} \) is perpendicular to the vectors given as options.

Now, to find which vector is perpendicular to \(\vec{A}\), we can find the dot product between \(\vec{A}\) and each option and check which one gives 0.

Dot Product: If \(\vec{u} = u_{x} \tilde{a}_{x}+u_{y} \tilde{a}_{y}+u_{z} \tilde{a}_{z}\) and \(\vec{v} = v_{x} \tilde{a}_{x}+v_{y} \tilde{a}_{y}+v_{z} \tilde{a}_{z}\) are two vectors, then the dot product of the two vectors is given by:\(\vec{u} \cdot \vec{v} = u_{x}v_{x} + u_{y}v_{y} + u_{z}v_{z}\)

For option (c), the vector is \( 2 \tilde{a}_{x}+2 \tilde{a}_{y}+5 \tilde{a}_{z} \)

Therefore,\(\vec{A} \cdot \vec{c} = 2(2) - 5(5) + 0 = -21\) As the dot product is not zero, option (c) is not perpendicular to \(\vec{A}\).

Hence, option (c) is incorrect. Now, we can check option (d) For option (d), the vector is \( 5 \tilde{a}_{x}+2 \dot{a}_{y} \) Therefore,\(\vec{A} \cdot \vec{d} = 2(5) - 5(0) + 0 = 10\). As the dot product is not zero, option (d) is not perpendicular to \(\vec{A}\). Hence, option (d) is incorrect.

Therefore, neither option (c) nor option (d) is perpendicular to \(\vec{A}\).

To  know more about perpendicular visit:
brainly.com/question/29017140

#SPJ11

Suppose that 1x/(5+x) = [infinity]∑n=0cnxn
Find the first few coefficients

Answers

The first few coefficients of the power series representation of f(x) = 1x/(5+x) are: c0 = 1/5, c1 = 1/5, c2 = -1/5 and c3 = 1/5.

To find the coefficients c0, c1, c2, ... of the power series representation of the function f(x) = 1x/(5+x), we can use the method of expanding the function as a Taylor series.

The Taylor series expansion of f(x) about x = 0 is given by:

f(x) = f(0) + f'(0)x + f''(0)x²/2! + f'''(0)x³/3! + ...

To find the coefficients, we need to compute the derivatives of f(x) and evaluate them at x = 0.

Let's begin by finding the derivatives of f(x):

f(x) = 1x/(5+x)

f'(x) = (d/dx)[1x/(5+x)]

= (5+x)(1) - x(1)/(5+x)²

= 5/(5+x)²

f''(x) = (d/dx)[5/(5+x)²]

= (-2)(5)(5)/(5+x)³

= -50/(5+x)³

f'''(x) = (d/dx)[-50/(5+x)³]

= (-3)(-50)(5)/(5+x)⁴

= 750/(5+x)⁴

Evaluating these derivatives at x = 0, we have:

f(0) = 1/5

f'(0) = 5/25 = 1/5

f''(0) = -50/125 = -2/5

f'''(0) = 750/625 = 6/5

Now we can express the function f(x) as a power series:

f(x) = f(0) + f'(0)x + f''(0)x²/2! + f'''(0)x³/3! + ...

Substituting the values we found:

f(x) = (1/5) + (1/5)x - (2/5)x²/2! + (6/5)x³/3! + ...

Now we can identify the coefficients:

c0 = 1/5

c1 = 1/5

c2 = -2/5(1/2!) = -1/5

c3 = 6/5(1/3!) = 1/5

Therefore, the first few coefficients of the power series representation of f(x) = 1x/(5+x) are:

c0 = 1/5

c1 = 1/5

c2 = -1/5

c3 = 1/5

To learn more about functions visit:

brainly.com/question/29769447

#SPJ11

Problem 3
3. (2 points) Let \( \varepsilon \) be any of the roots of the equation \( x^{2}+x+1=0 \). Find \[ \frac{1+\varepsilon}{(1-\varepsilon)^{2}}+\frac{1-\varepsilon}{(1+\varepsilon)^{2}} \]

Answers

The value of the given expression [tex]\[ \frac{1+\varepsilon}{(1-\varepsilon)^{2}}+\frac{1-\varepsilon}{(1+\varepsilon)^{2}} \][/tex]  is equal to 1.

To find the value of the expression [tex]\(\frac{1+\varepsilon}{(1-\varepsilon)^2} + \frac{1-\varepsilon}{(1+\varepsilon)^2}\)[/tex] , where [tex]\(\varepsilon\)[/tex] is any of the roots of the equation [tex]\(x^2 + x + 1 = 0\)[/tex].

Let's find the roots of the equation . We can solve this quadratic equation using the quadratic formula:

[tex]\[x = \frac{-b \pm \sqrt{b^2 - 4ac}}{2a}\][/tex]

For this equation, a=1, b=1, and c= 1, so:

[tex]\[x = \frac{-1 \pm \sqrt{1 - 4}}{2} = \frac{-1 \pm \sqrt{-3}}{2} = \frac{-1 \pm i\sqrt{3}}{2}\][/tex]

Now, let's substitute [tex]\(\varepsilon\)[/tex] with one of these roots in the given expression:

[tex]\[\frac{1+\varepsilon}{(1-\varepsilon)^2} + \frac{1-\varepsilon}{(1+\varepsilon)^2} = \frac{1 + \left(\frac{-1 + i\sqrt{3}}{2}\right)}{\left(1 - \left(\frac{-1 + i\sqrt{3}}{2}\right)\right)^2} + \frac{1 - \left(\frac{-1 + i\sqrt{3}}{2}\right)}{\left(1 + \left(\frac{-1 + i\sqrt{3}}{2}\right)\right)^2}\][/tex]

To simplify this expression, let's calculate each term separately.

First, let's simplify the numerator of the first fraction:

[tex]\[1 + \frac{-1 + i\sqrt{3}}{2} = \frac{2}{2} + \frac{-1 + i\sqrt{3}}{2} = \frac{1 + i\sqrt{3}}{2}\][/tex]

Next, let's simplify the denominator of the first fraction:

[tex]\[1 - \left(\frac{-1 + i\sqrt{3}}{2}\right) = 1 - \frac{-1 + i\sqrt{3}}{2} = \frac{2}{2} - \frac{-1 + i\sqrt{3}}{2} = \frac{3 + i\sqrt{3}}{2}\][/tex]

Therefore, the first fraction becomes:

[tex]\[\frac{1 + \varepsilon}{(1 - \varepsilon)^2} = \frac{\frac{1 + i\sqrt{3}}{2}}{\left(\frac{3 + i\sqrt{3}}{2}\right)^2} = \frac{1 + i\sqrt{3}}{3 + i\sqrt{3}} = \frac{(1 + i\sqrt{3})(3 - i\sqrt{3})}{(3 + i\sqrt{3})(3 - i\sqrt{3})}\][/tex]

Expanding and simplifying the numerator and denominator, we get:

[tex]\[\frac{(1 + i\sqrt{3})(3 - i\sqrt{3})}{(3 + i\sqrt{3})(3 - i\sqrt{3})} = \frac{3 - i\sqrt{3} + 3i\sqrt{3} + 3}{9 - (i\sqrt{3})^2} = \frac{6 + 2i\sqrt{3}}{9 + 3} = \frac{6 + 2i\sqrt{3}}{12} = \frac{1}{2} + \frac{i\sqrt{3}}{2}\][/tex]

Substituting \(\varepsilon = \varepsilon_2\) into the expression:

[tex]\[\frac{1 + \varepsilon}{(1 - \varepsilon)^2} = \frac{1 + \left(\frac{-1 - i\sqrt{3}}{2}\right)}{\left(1 - \left(\frac{-1 - i\sqrt{3}}{2}\right)\right)^2} + \frac{1 - \left(\frac{-1 - i\sqrt{3}}{2}\right)}{\left(1 + \left(\frac{-1 - i\sqrt{3}}{2}\right)\right)^2}\][/tex]

Simplifying the numerator of the first fraction:

[tex]\[1 + \frac{-1 - i\sqrt{3}}{2} = \frac{2}{2} + \frac{-1 - i\sqrt{3}}{2} = \frac{1 - i\sqrt{3}}{2}\][/tex]

Simplifying the denominator of the first fraction:

[tex]\[1 - \left(\frac{-1 - i\sqrt{3}}{2}\right) = \frac{2}{2} - \frac{-1 - i\sqrt{3}}{2} = \frac{3 - i\sqrt{3}}{2}\][/tex]

Therefore, the first fraction becomes:

[tex]\[\frac{1 + \varepsilon_2}{(1 - \varepsilon_2)^2} = \frac{\frac{1 - i\sqrt{3}}{2}}{\left(\frac{3 - i\sqrt{3}}{2}\right)^2} = \frac{1 - i\sqrt{3}}{3 - i\sqrt{3}} = \frac{(1 - i\sqrt{3})(3 + i\sqrt{3})}{(3 - i\sqrt{3})(3 + i\sqrt{3})}\][/tex]

Expanding and simplifying the numerator and denominator, we get:

[tex]\[\frac{(1 - i\sqrt{3})(3 + i\sqrt{3})}{(3 - i\sqrt{3})(3 + i\sqrt{3})} = \frac{3 + i\sqrt{3} - 3i\sqrt{3} + 3}{9 - (i\sqrt{3})^2} = \frac{6 - 2i\sqrt{3}}{9 + 3} = \frac{6 - 2i\sqrt{3}}{12} = \frac{1}{2} - \frac{i\sqrt{3}}{2}\][/tex]

Now, we can sum the two fractions:

[tex]\[\frac{1 + \varepsilon}{(1 - \varepsilon)^2} + \frac{1 - \varepsilon}{(1 + \varepsilon)^2} = \left(\frac{1}{2} + \frac{i\sqrt{3}}{2}\right) + \left(\frac{1}{2} - \frac{i\sqrt{3}}{2}\right) = \frac{1}{2} + \frac{1}{2} = 1\][/tex]

Therefore, the value of the given expression is equal to 1.

Learn more about Quadratic Equation here:

https://brainly.com/question/30098550

#SPJ4

The question attached here is inappropriate, the correct question is

Let [tex]\( \varepsilon \)[/tex] be any of the roots of the equation [tex]\( x^{2}+x+1=0 \)[/tex].

Find the value of  [tex]\[ \frac{1+\varepsilon}{(1-\varepsilon)^{2}}+\frac{1-\varepsilon}{(1+\varepsilon)^{2}} \][/tex].

Given that the system has a relationship between input \( x(t) \) and output \( y(t) \), it can be written as a differential equation as follows: \[ \frac{d^{3} y}{d t^{3}}+2 \frac{d^{2} y}{d t^{2}}+1

Answers

The given system has a relationship between the output \( y(t) \) and its derivatives. It can be represented by the differential equation \(\frac{d^3 y}{dt^3} + 2\frac{d^2 y}{dt^2} + 1 = 0\).

The given differential equation represents a third-order linear homogeneous differential equation. It relates the output function \( y(t) \) with its derivatives with respect to time.

The equation states that the third derivative of \( y(t) \) with respect to time, denoted as \(\frac{d^3 y}{dt^3}\), plus two times the second derivative of \( y(t) \) with respect to time, denoted as \(2\frac{d^2 y}{dt^2}\), plus one, is equal to zero.

This equation describes the dynamics of the system and how the output \( y(t) \) changes over time. The coefficients 2 and 1 determine the relative influence of the second and first derivatives on the system's behavior.

Solving this differential equation involves finding the function \( y(t) \) that satisfies the equation. The solution will depend on the initial conditions or any additional constraints specified for the system.

LEARN MORE ABOUT differential equation here: brainly.com/question/32645495

#SPJ11








Given 2y + 16 = 5x y(0) = 3.6 the value of y(3) using Euler's method and a step size of h = 1.5 is

Answers

Using Euler's method with a step size of h = 1.5, the value of y(3) is approximately -13.025.

To approximate the value of y(3) using Euler's method with a step size of h = 1.5, we can iteratively compute the values of y at each step.

The given differential equation is:

2y + 16 = 5x

We are given the initial condition y(0) = 3.6, and we want to find the value of y at x = 3.

Using Euler's method, the update rule is:

y(i+1) = y(i) + h * f(x(i), y(i))

where h is the step size, x(i) is the current x-value, y(i) is the current y-value, and f(x(i), y(i)) is the value of the derivative at the current point.

Let's calculate the values iteratively:

Step 1:

x(0) = 0

y(0) = 3.6

f(x(0), y(0)) = (5x - 16) / 2 = (5 * 0 - 16) / 2 = -8

y(1) = y(0) + h * f(x(0), y(0)) = 3.6 + 1.5 * (-8) = 3.6 - 12 = -8.4

Step 2:

x(1) = 0 + 1.5 = 1.5

y(1) = -8.4

f(x(1), y(1)) = (5x - 16) / 2 = (5 * 1.5 - 16) / 2 = -6.2

y(2) = y(1) + h * f(x(1), y(1)) = -8.4 + 1.5 * (-6.25) = -8.4 - 9.375 = -17.775

Step 3:

x(2) = 1.5 + 1.5 = 3

y(2) = -17.775

f(x(2), y(2)) = (5x - 16) / 2 = (5 * 3 - 16) / 2 = 2.5

y(3) = y(2) + h * f(x(2), y(2)) = -17.775 + 1.5 * 2.5 = -17.775 + 3.75 = -13.025

Therefore, using Euler's method with a step size of h = 1.5, the value of y(3) is approximately -13.025.

To know more about Euler's method, visit:

https://brainly.com/question/30699690

#SPJ11

. Six years from now, P 5M will be needed to pay for a building renovation. In order to generate this surn, a sinking fund consisting of three beginaineof-year deposits (A) starting today is establishod. No further payments will be made after the said annual deposits. If money is worth 8% per annum, the value of A is closest io a) P1,132,069 c) P 1,457,985 sunk b) 1,222,635 d) P1,666,667

Answers

The value of A is closest to P1,132,069.

To determine the value of A, we can use the concept of a sinking fund and present value calculations. A sinking fund is established by making regular deposits over a certain period of time to accumulate a specific amount of money in the future.

In this scenario, we need to accumulate P5M (P5,000,000) in six years. The deposits are made at the beginning of each year, and the interest rate is 8% per annum. We want to find the value of each deposit, denoted as A.To calculate the value of A, we can use the formula for the future value of an ordinary annuity:

FV=A×( r(1+r)^ n −1 )/r

where FV is the future value, A is the annual deposit, r is the interest rate, and n is the number of periods.

Substituting the given values and Solving this equation, we find that A is approximately P1,132,069.

Therefore, the value of A, closest to the given options, is P1,132,069 (option a).

Learn more about Substituting here:

brainly.com/question/30336794

#SPJ11

is 100+x−0.001x2+0.00003x3 (in dollars per unit).
Find the increase in revenue if the production level is raised from 1,100 units to 1,700 units. \
a. 551,366,000
b. $51,367,000
c. S17,765,250
d. $26,866,667
e. $37,974,583

Answers

The revenue function given is R(x) = 100x - 0.001x² + 0.00003x³ dollars per unit. The production level is raised from 1,100 units to 1,700 units.

Let's start by finding the revenue generated by producing 1,100 units:

R(1,100) = 100(1,100) - 0.001(1,100)² + 0.00003(1,100)³

        = 110,000 - 1.21 + 4.2

        = 108,802.79 dollars

Now, let's find the revenue generated by producing 1,700 units:

R(1,700) = 100(1,700) - 0.001(1,700)² + 0.00003(1,700)³

        = 170,000 - 4.89 + 10.206

        = 175,115.31 dollars

Thus, the correct option is a)551,366,000.

To know more about production visit :

https://brainly.com/question/30333196

#SPJ11

Which scenarios describe data collected in a biased way? Select all that apply.

Answers

The scenarios that describe data collected in a biased way are: A principal interviewed the 25 students who scored highest on a reading test. Trey picked 10 numbers from a bag containing 100 raffle tickets without looking. Josh asked the first 25 people he met at the dog park if they preferred dogs or cats.

Here are the scenarios that describe data collected in a biased way:

A principal interviewed the 25 students who scored highest on a reading test. This is biased because it only includes the opinions of students who are already good at reading. It does not include the opinions of students who are struggling with reading.Trey picked 10 numbers from a bag containing 100 raffle tickets without looking. This is biased because it is possible that Trey picked more numbers from one section of the bag than another. This could skew the results of his data.Josh asked the first 25 people he met at the dog park if they preferred dogs or cats. This is biased because it only includes the opinions of people who are already at the dog park. It does not include the opinions of people who do not like dogs or who do not go to the dog park.

The other scenario, where Kiara puts the names of all the students in her school into a hat and then draws 5 names, is not biased. This is because Kiara is using a random sampling method. This means that every student in the school has an equal chance of being selected.

For such more question on principal:

https://brainly.com/question/25720319

#SPJ8

Use the formula κ(x)=|f"(x)|/[1+(f’(x))^2]^3/2 to find the curvature.
y=5tan(x)
κ(x)=10 sec^2 (x) tan(x) /[1+25sec^4(x)]^3/2

Answers

The value of the curvature κ(x) = 10 sec^2 x tan x /[1+25 sec^4 x]^3/2.

To find the curvature using the formula κ(x)=|f"(x)|/[1+(f’(x))^2]^3/2 with the function y = 5 tan x, we need to differentiate y twice and substitute the values in the formula.

Given function is y = 5 tan x.

The first derivative of y = 5 tan x is: y' = 5 sec^2 x.

The second derivative of y = 5 tan x is: y'' = 10 sec^2 x tan x.

Substitute the value of f"(x) and f'(x) in the formula of curvature κ(x) = |f"(x)|/[1+(f’(x))^2]^3/2 :κ(x) = |10 sec^2 x tan x|/[1+(5 sec^2 x)^2]^3/2κ(x) = 10 sec^2 x tan x /[1+25 sec^4 x]^3/2

Therefore, the value of the curvature κ(x) = 10 sec^2 x tan x /[1+25 sec^4 x]^3/2.

To know more about curvature visit:

brainly.com/question/33155369

#SPJ11

Find the area of the following region. The region inside one leaf of the rose r=3cos(7θ) The area of the region is square units. (Type an exact answer, using π as needed).

Answers

The area of the region is square units.. 19.855.

The equation of the rose is r=3cos(7θ). Here is its graph :The area of one leaf of the rose can be calculated as follows:This implies that the area of the region inside one leaf of the rose r=3cos(7θ) is 19.855 square units. 

To know more about area visit:

brainly.com/question/28393668

#SPJ11

What is the cardinality (number of elements) of ?
A) 18
B) 19
C) 20
D) 21
E) None of the given

Answers

D) 21

---------------------

Wse a graphing utity to groph the equation and graphically approximate the values of \( x \) that satisfy the specified inequalitieg. Then solve each inequality algebraically. \[ y=x^{3}-x^{2}-16 x+16

Answers

The given inequality is y ≤ 0.We will use a graphing utility to graph the equation and approximate the values of x that satisfy the inequality.

In order to graph the given inequality, we need to graph the equation y = x³ - x² - 16x + 16 first. We can use the graphing utility to graph this equation as shown below:

graph{y=x^3-x^2-16x+16 [-10, 10, -5, 5]}

From the graph, we can see that the values of x that satisfy the inequality y ≤ 0 are the values for which the graph of the equation y = x³ - x² - 16x + 16 is below the x-axis.

We can approximate these values by looking at the x-intercepts of the graph. We can see from the graph that the x-intercepts of the graph are at x = -2, x = 2, and x = 4.

Therefore, the values of x that satisfy the inequality y ≤ 0 are approximately x ≤ -2, -2 ≤ x ≤ 2, and 4 ≤ x.

To solve the inequality algebraically, we need to find the values of x that make y ≤ 0. We can do this by factoring the expression y = x³ - x² - 16x + 16:

y = x³ - x² - 16x + 16= x²(x - 1) - 16(x - 1)= (x - 1)(x² - 16)= (x - 1)(x - 4)(x + 4)

The inequality y ≤ 0 is satisfied when the value of y is less than or equal to zero. Therefore, we need to find the values of x that make the expression (x - 1)(x - 4)(x + 4) ≤ 0.

To find these values, we can use the method of sign analysis. We can make a sign table for the expression (x - 1)(x - 4)(x + 4) as shown below:x-441Therefore, the values of x that make the expression (x - 1)(x - 4)(x + 4) ≤ 0 are approximately x ≤ -4, 1 ≤ x ≤ 4.

Therefore, the solution to the inequality y ≤ 0 is approximately x ≤ -2, -2 ≤ x ≤ 2, and 4 ≤ x, or -4 ≤ x ≤ 1 and 4 ≤ x.

To know more about inequality visit:

https://brainly.com/question/20383699

#SPJ11

Justify whether the systems are causal or non-causal. (i) \( y[n]=5 x[n]+8 x[n-3] \), for \( n \geq 0 \) (ii) \( y[n]=9 x[n-1]+7 x[n+1]-0.5 y[n-1] \) for \( n \geq 0 \)

Answers

The first system (i) [tex]\(y[n] = 5x[n] + 8x[n-3]\) for \(n \geq 0\)[/tex] is non-causal, while the second system (ii) [tex]\(y[n] = 9x[n-1] + 7x[n+1] - 0.5y[n-1]\) for \(n \geq 0\)[/tex] is causal.

To determine whether a system is causal or non-causal, we need to examine the range of values for the time index n in the system's equations.

(i) [tex]\(y[n] = 5x[n] + 8x[n-3]\) for \(n \geq 0\):[/tex]

In this system, the output y[n] at any time index n depends on the input x[n] and the delayed input x[n-3].
The presence of the term x[n-3] indicates that the system depends on the input's future values. Therefore, this system is non-causal.

(ii) [tex]\(y[n] = 9x[n-1] + 7x[n+1] - 0.5y[n-1]\) for \(n \geq 0\)[/tex]

In this system, the output y[n] at any time index n depends on the input x[n-1], the input x[n+1], and the delayed output y[n-1].
All the terms involve either the current or past values of the input or output. There is no dependency on future values. Therefore, this system is causal.

Learn more about causal system here:

https://brainly.com/question/32685220

#SPJ11

Given the definition of f(x) below, how is the function best described at x=0?
{x²+2x-2 if x < 0
Let F(x) = {2x² + 3x -2 if 0 ≤ x < 3
{-2x²-3x - 1 if x ≥ 3

Answers

At x = 0, the function f(x) is best described as having a "corner" or a "discontinuity" due to a change in the definition of the function at that point.

The function f(x) is defined differently for different ranges of x. For x < 0, f(x) = x^2 + 2x - 2. For 0 ≤ x < 3, f(x) = 2x^2 + 3x - 2. And for x ≥ 3, f(x) = -2x^2 - 3x - 1.

At x = 0, the function has a change in its definition. For x < 0, the expression x^2 + 2x - 2 is used to define f(x), while for x ≥ 0, the expression 2x^2 + 3x - 2 is used. Since 0 is the boundary between these two ranges, the function changes its definition at x = 0.

This change in definition results in a discontinuity or a "corner" in the graph of the function at x = 0. It means that the behavior of the function on the left side of 0 is different from its behavior on the right side of 0. Therefore, at x = 0, the function f(x) is best described as having a corner or a discontinuity.

Learn more about function here:

https://brainly.com/question/30721594

#SPJ11

please solve it....

Answers

The total amount of sales is approximately Rs. 870000.

Let's break down the problem step by step to find the total amount of sales.

Let's denote the total annual sales as "S" in rupees.

According to the given information:

The agent receives a commission of 10% on the total annual sales.

The agent also receives a bonus of 2% on the excess of sales over Rs. 20000.

The total amount of commission and bonus is Rs. 104000.

To calculate the commission and bonus, we can set up the following equation:

Commission + Bonus = Rs. 104000

The commission can be calculated as 10% of the total sales:

Commission = 0.10S

The bonus is applicable only on the excess of sales over Rs. 20000. So, if the sales exceed Rs. 20000, the bonus amount can be calculated as 2% of (Total Sales - Rs. 20000):

Bonus = 0.02(S - 20000)

Substituting the values of commission and bonus in the equation:

0.10S + 0.02(S - 20000) = 104000

Simplifying the equation:

0.10S + 0.02S - 400 = 104000

0.12S = 104400

Dividing both sides of the equation by 0.12:

S = 104400 / 0.12

S ≈ 870000

Therefore, the total amount of sales is approximately Rs. 870000.

for such more question on total amount

https://brainly.com/question/25109150

#SPJ8

Question

a commission of 10% is given to an agent on the total annual sales with the addittion of bonus 2% on the excess of sales over rs. 20000 if the total amount of commission and bonus is rs.104000 find the total amount sales

For each of the methods we've learned so far:
(a) integration.
(b) e^rt,
(c) separation of variables,
(d) Laplace transform,
state whether the method works for the given problem. Briefly explain why (it works or fails).

Answers

The effectiveness of each method depends on the characteristics of the differential equation. Integration works for equations that can be directly integrated, e^rt is useful for linear homogeneous equations, separation of variables is applicable to first-order equations, and the Laplace transform is suitable for linear equations with constant coefficients.  

(a) Integration: This method works for problems where the equation can be directly integrated. By integrating both sides of the equation, we can find the antiderivative and obtain the general solution. However, not all differential equations can be solved through integration alone, especially those that involve nonlinear or higher-order terms.

(b) e^rt: This method is effective for solving linear homogeneous equations with constant coefficients. By assuming a solution of the form y = e^rt and substituting it into the differential equation, we can determine the values of r that satisfy the equation. However, it may not work for nonlinear or non-homogeneous equations.

(c) Separation of variables: This method works well for first-order ordinary differential equations that can be separated into two variables. By rearranging the equation and integrating each side separately, we can find the solution. However, it may not be applicable to higher-order differential equations or equations with nonlinear terms.

(d) Laplace transform: The Laplace transform method is suitable for solving linear ordinary differential equations with constant coefficients. By applying the Laplace transform to both sides of the equation and manipulating the resulting algebraic equation, we can obtain the solution. However, it may not be practical for solving certain boundary value problems or equations with complicated initial conditions.

Learn more about antiderivative here:

https://brainly.com/question/33243567

#SPJ11

1) Solve the following difference equation using the transform method z : y(k+2)+y(k)=x(k) where x(k) is the discrete unit step function and y(k)=0 for k<0. Justify your answer step by step!

Answers

To solve the given difference equation using the transform method, we can apply the Z-transform. Given the difference equation y(k+2) + y(k) = x(k), where x(k) is the discrete unit step function and y(k) = 0 for k < 0, we can take the Z-transform of both sides of the equation.

Applying the Z-transform to the given difference equation, we have:

Z{y(k+2)} + Z{y(k)} = Z{x(k)}

Using the time-shifting property of the Z-transform, we obtain:

z^2Y(z) - zy(0) - y(1) + Y(z) = X(z)

Substituting y(0) = 0 and y(1) = 0 (since y(k) = 0 for k < 0) and rearranging the equation, we get:

(Y(z)(z^2 + 1)) - (zY(z)) = X(z)

Now, we can solve for Y(z) by isolating it on one side of the equation:

Y(z) = X(z) / (z^2 + 1 - z)

Finally, to obtain the time-domain solution, we need to find the inverse Z-transform of Y(z). The inverse Z-transform can be computed using partial fraction decomposition and the table of Z-transform pairs. Once we obtain the inverse Z-transform, we will have the solution y(k) in the time domain.

Learn more about time-shifting property  here: brainly.com/question/33233898

#SPJ11

By means of the Routh criterion analyze the stability of the given characteristic equation. Discuss how many left half plane, right half plane and jo poles do the system have? s5+2s++ 24s3+ 48s2 - 25s - 50 = 0

Answers

The given characteristic equation has two poles in the right half plane and three poles in the left half plane or on the imaginary axis.

To analyze the stability of the given characteristic equation using the Routh-Hurwitz criterion, we need to arrange the equation in the form:

s^5 + 2s^4 + 24s^3 + 48s^2 - 25s - 50 = 0

The Routh table will have five rows since the equation is of fifth order. The first two rows of the Routh table are formed by the coefficients of the even and odd powers of 's' respectively:

Row 1: 1   24   -25

Row 2: 2   48   -50

Now, we can proceed to fill in the remaining rows of the Routh table. The elements in the subsequent rows are calculated using the formulas:

Row 3: (2*(-25) - 24*48) / 2 = -1232

Row 4: (48*(-1232) - (-25)*2) / 48 = 60325

Row 5: (-1232*60325 - 2*48) / (-1232) = 2

The number of sign changes in the first column of the Routh table is equal to the number of roots in the right half plane (RHP). In this case, there are two sign changes. Thus, there are two poles in the RHP. The remaining three poles are in the left half plane (LHP) or on the imaginary axis (jo poles).

Learn more About imaginary axis from the given link

https://brainly.com/question/1142831

#SPJ11

Question 3 2 pts A widget factory produces n widgets in t hours of a single day. The number of widgets the factory produces is given by the formula n(t) = 10,000t - 25t2, 0≤t≤9. The cost, c, in dollars of producing n widgets is given by the formula c(n) = 2040 + 1.74n. Find the cost c as a function of time t that the factory is producing widgets.
A) c(t) = 2040 + 17,400t - 43.5t²
B) c(t) = 2045 +17,400t - 42.5t²
C) c(t) = 2045 +17,480t - 42.5t²
D) c(t) = 2040 + 17,480t - 43.5t²

Answers

Option A. Answer: A) c(t) = 2040 + 17,400t - 43.5t².Given that a widget factory produces n widgets in t hours of a single day. The number of widgets the factory produces is given by the formula,n(t) = 10,000t - 25t², 0 ≤ t ≤ 9

and the cost, c, in dollars of producing n widgets is given by the formula c(n) = 2040 + 1.74n.

We need to find the cost c as a function of time t that the factory is producing widgets.

To find the cost c as a function of time t that the factory is producing widgets, we substitute n(t) in the formula of c(n) as follows;

c(t) = 2040 + 1.74 × [n(t)]c(t)

= 2040 + 1.74 × [10000t - 25t²]c(t)

= 2040 + 17400t - 43.5t²

Hence, the cost c as a function of time t that the factory is producing widgets is

c(t) = 2040 + 17,400t - 43.5t²,

which is option A. Answer: A) c(t) = 2040 + 17,400t - 43.5t².

To know more about factory produces visit:

https://brainly.com/question/29698347

#SPJ11

Consider the given function. f(x)=e^x−8 Evaluate the Riemann sum for 0≤x≤2, with n=4, correct to six decimal places, taking the sample points to be midpoints.

Answers

We need to evaluate the Riemann sum for[tex]0≤x≤2[/tex], with n=4,

correct to six decimal places, taking the sample points to be midpoints using the given function.

f(x) = e^x - 8

We need to find the Riemann sum which is given by;

Riemann sum = [f(x1) + f(x2) + f(x3) + f(x4)]Δx

Where,[tex]Δx = (b - a)/n = (2 - 0)/4 = 1/2 = 0.5And, x1 = 0.25, x2 = 0.75, x3 = 1.25 and x4 = 1.75[/tex]

We need to find the value of f(xi) at the midpoint xi of each subinterval.

So, we have[tex]f(0.25) = e^(0.25) - 8 = -7.45725f(0.75) = e^(0.75) - 8 = -6.23745f(1.25) = e^(1.25) - 8 = -3.83889f(1.75) = e^(1.75) - 8 = 0.08554[/tex]

Now, putting these values in the Riemann sum, we get

Riemann[tex]sum = [-7.45725 + (-6.23745) + (-3.83889) + 0.08554] × 0.5= -9.72328 × 0.5= -4.86164[/tex]

Riemann sum for 0 ≤ x ≤ 2, with n = 4, correct to six decimal places, taking the sample points to be midpoints is equal to -4.86164 (correct to six decimal places).

Hence, the correct option is (d) -4.86164.

To know more about Riemann visit :

https://brainly.com/question/30241844

#SPJ11

Evaluate:
Find the missing terms.
5
Σ6(2)n-1
n = 1

Answers

The missing terms are s = 6, a = 6.

To evaluate the given expression, we need to find the missing terms.

The expression is Σ6(2)n-1, where n starts from 1.

To find the missing terms, let's calculate the first few terms of the series:

When n = 1:

6(2)^1-1 = 6(2)^0 = 6(1) = 6

When n = 2:

6(2)^2-1 = 6(2)^1 = 6(2) = 12

When n = 3:

6(2)^3-1 = 6(2)^2 = 6(4) = 24

Based on the pattern, we can see that the terms of the series are increasing. Therefore, we can represent the series as:

s = 6, 12, 24, ...

The missing terms in the expression are:

a = 6 (the first term of the series)

d = 6 (the common difference between consecutive terms)

So, the missing terms are s = 6, a = 6.

for such more question on series

https://brainly.com/question/29062598

#SPJ8

For the given cost function C(x)=128√x+ x^2/1000 find
a) The cost at the production level 1850
b) The average cost at the production level 1850
c) The marginal cost at the production level 1850
d) The production level that will minimize the average cost.
e) The minimal average cost.
Give answers to at least 3 decimal places.

Answers

The cost at the production level 1850 is $11260. The average cost at the production level 1850 is $6.086. The marginal cost at the production level 1850 is $15.392.

a) To find the cost at the production level 1850, substitute x = 1850 into the cost function C(x). The cost at this production level is $11260.

b) The average cost is obtained by dividing the total cost by the production level. At x = 1850, the total cost is $11260 and the production level is 1850. Therefore, the average cost at this production level is $6.086.

c) The marginal cost represents the rate of change of the cost function with respect to the production level. To find the marginal cost at x = 1850, take the derivative of the cost function with respect to x and substitute x = 1850. The marginal cost at this production level is $15.392.

d) The production level that minimizes the average cost can be found by setting the derivative of the average cost function equal to zero and solving for x. The production level that minimizes the average cost is 12800 units.

e) To find the minimal average cost, substitute the production level 12800 into the average cost function. The minimal average cost is $5.532.

Learn more about average cost : brainly.com/question/29509552

#SPJ11

How do you find these

What is the measure of segment DC?
What is the measure of segment C'B'?
What is the measure of segment AD?
What is the measure of segment A'B'?
What is the measure of angle C?
What is the measure of angle A'?
What is the measure of angle D'?
What is the measure of angle B'?
What is the measure of angle A?

Answers

Measure of segment DC is 24

Measure of segment C'B' is 16

Measure of segment AD is 10

Measure of segment A'B' is 7

Measure of angle C is 49 degrees

Measure of angle A' is 111 degrees

Measure of angle D' is 65 degrees

Measure of angle B' is 135 degrees

Measure of angle A is 111 degrees

How to determine the measures

To determine the measures, we need to know the properties of parallelograms, we have;

Opposite angles are equal.Opposite sides are equal and parallel.Diagonals bisect each other.Sum of any two adjacent angles is 180°

We have that the two parallelograms are equal

Now, trace the angles from one to other

Angle A = 360 - (49 + 135 + 65)

add the values, we have;

Angle A = 360 -249

Angle A =111 degrees

Learn more about parallelograms at: https://brainly.com/question/10744696

#SPJ1

Water is pumped out of a holding tank at a rate of r(t) = 5-6e^-0.25t liters per minute, where t is in minutes since the pump started.

1. How much water was pumped out of the tank, 30 minutes after the pump started?
________
2. If the holding tank contains 1000 liters of water
when the pump is started, then how much water is in the tank 1 hour (60 minutes) after the pump has started?
_______

Answers

The volume of water in the tank 1 hour (60 minutes) after the pump has started is approximately 530.6 liters.

1) The rate at which water is being pumped out of the tank is given by:

r(t) = 5-6e^(-0.25t) liters per minute. The integral of r(t) from 0 to 30 will give the volume of water pumped out in the first 30 minutes of operation. So, the volume of water pumped out in 30 minutes is given by:
= ∫r(t)dt

= [5t + 24e^(-0.25t)]_0^30

= [5(30) + 24e^(-0.25(30))] - [5(0) + 24e^(-0.25(0))]

≈ 117.6 liters
The volume of water pumped out of the tank 30 minutes after the pump started is approximately 117.6 liters.

2) We need to find the volume of water left in the tank after 60 minutes of pump operation. Let V(t) be the tank's water volume at time t.

Then, V(t) satisfies the differential equation:

dV/dt = -r(t) and the initial condition:

V(0) = 1000.

We can use the method of separation of variables to solve this differential equation:
dV/dt = -r(t)

⇒ dV = -r(t)dt
Integrating both sides from t = 0 to t = 60, we get:
∫dV = -∫r(t)dt
⇒ V(60) - V(0)

= ∫[5 - 6e^(-0.25t)]dt

= [5t + 24e^(-0.25t)]_0^60

= [5(60) + 24e^(-0.25(60))] - [5(0) + 24e^(-0.25(0))]

≈ 530.6 liters
The volume of water in the tank 1 hour (60 minutes) after the pump has started is approximately 530.6 liters.

Water is being pumped out of the tank at a given rate, and we are given the value of r(t) in liters per minute, where t is in minutes since the pump started.

To know more about the separation of variables, visit:

brainly.com/question/30417970

#SPJ11

Investigate the sequence {a_n} defined by
(a_1 = 5, a_(n+1) = √ (5a_n).

Answers

The sequence {a_n} defined by a_1 = 5 and a_(n+1) = √(5a_n) is investigated. The explanation below provides insights into the behavior of the sequence.

To investigate the sequence {a_n}, we start with a_1 = 5 and recursively compute the terms using the formula a_(n+1) = √(5a_n). By substituting the value of a_n into the formula, we can find the next term in the sequence. For example, a_2 = √(5a_1) = √(5*5) = √25 = 5. Similarly, we can find a_3, a_4, and so on. As we continue this process, we observe that each term is equal to the previous term, indicating that the sequence remains constant.

Therefore, the sequence {a_n} is a constant sequence, where all terms are equal to 5.

Learn more about substituting here: brainly.com/question/24807436

#SPJ11

Which of the following statements is true about the sum of a rational and an irrational number?
A.
The sum of a rational and irrational number is always an irrational number.

B.
The sum of a rational and irrational number is always a rational number.

C.
The sum of a rational and irrational number is never an irrational number.

D.
The sum of a rational and irrational number is sometimes a rational number.

Answers

It is incorrect to say that the sum of a rational and an irrational number is always irrational (A) or always rational (B). Similarly, it is incorrect to say that the sum is never irrational (C). The correct statement is that the sum of a rational and irrational number is sometimes a rational number (D).

The correct answer is D. The sum of a rational and irrational number is sometimes a rational number.

To understand why, let's consider an example. Let's say we have a rational number, such as 2/3, and an irrational number, such as √2.

When we add these two numbers together: 2/3 + √2

The result is a sum that can be rational or irrational depending on the specific numbers involved. In this case, the sum is approximately 2.94, which is an irrational number. However, if we were to choose a different irrational number, the result could be rational.

For instance, if we had chosen π (pi) as the irrational number, the sum would be:2/3 + π

In this case, the sum is an irrational number, as π is irrational. However, it's important to note that there are cases where the sum of a rational and an irrational number can indeed be rational, such as 2/3 + √4, which equals 2.

for more search question sum

https://brainly.com/question/30442577

#SPJ8

Other Questions
Does whether constructive feedback necessarily need to be positive? In addition, discuss how constructive criticism can be based on prejudice and unconscious bias. Explain your answers. The nurse is caring for a client who has cirrhosis of the liver. The client's latest laboratory testing shows a prolonged prothrombin time. For what assessment finding would the nurse monitor:a) deep vein thrombosis.b) jaundice.c) hematemesis.d) pressure injury. You have been asked to use a proportional controller to make a stable closed-loop system. The transfer function of the plant is: C(s) = s +1 / s(s + 4s + 4) (s + 2s + 1) Write the characteristic equation of the closed-loop system as a function of both K and s. this aspect of behavioral cusps occurs when access to new environments, consequences, and new responses become possible. What is the answer of this question?Which of the following are true about JIT compilation? Select all that apply. The time it takes between starting a program (e.g. double clicking it) and executing the first machine instruction specifi although military contracts produce many jobs, they are one of the _____ ways to create jobs. Inverse demand for oil in a competitive market is P=705Q, where Q is billions of barrels (BBL) of oil per year and P is price per barrel. The marginal extraction costs are MC=4Q, so that the first barrel costs $4 to extract, the second barrel costs $8, and so on. There is a total of 13 BBL of oil available to use in periods 0 and 1. Assume the interest rate is 6%. Answer the following questions using the information above. a. Find the social welfare maximizing quantities for periods 0 and 1 . Round your answers to two decimal places. State the equimarginal principle that you used to find the revenuemaximizing solution. b. What are the corresponding prices in each period? Round your answers to two decimal places. Refer to part a. c. How does the equimarginal principle used in part a. relate to Hotelling's rule? Explain in a sentence or two. Measure and Write the experimentat value of all the voltage( use appropriate devices for meanuring)(5Marks) use the table to recerd your alues( write the name of vottages 1 st Row and corresponding Required information A three-phase line has an impedance of 1 + 32 per phase. The line feeds a balanced delta-connected load, which absorbs a total complex power of 12 + j5 kVA. The line voltage at the load end has a magnitude of 300 V. Calculate the magnitude of the line voltage at the source end. The magnitude of the line voltage at the source end is [ 304.6 V. Find the principal P that must be invested at rate r , compounded monthly , so that $1,000,000 will be available for retirement in t years . (round your answer to the nearest cent)r = 5% t = 45P = $ _____ Dryness fraction(x) of superheated steam isa) equal to 0b) greater than 1c) less than 1d) equal to 1 the promoters of positively controlled operons require activator proteins because Given f(x)= 3x+1 : Use the limit definition of derivative to find f(x) meaning find limh0f(x+h)f(x)/ h Using the definition of the derivative, find f'(x). Then find f'(1), f'(2), and f'(3) when the derivative exists. f(x) = -x^2 +4x-5 f(x) = _____(Type an expression using x as the variable.) QUESTION!!! - a cylinder with a moveable piston holds 3.05 mol of argon at a constant temperature of 260 K. As the gas is compressed isothermally, its pressure increases from 101 kPa to 122 kPaPART A! -find the final volume of the gasPART B! - find the work done by the gasLAST PART (PART C) - find the heat added to the gasHere it is typed out. There are no figures and there's nothing else to it. Stop making it difficult. This is all the info provided as it could have clearly been seen in the millions of photos I had to post. Not sure why you're so lost and confused. Problem 2. In a public-key system using RSA, perform encryption and decryption for the following p,q,e, and M : p=7:q=11,e=17:M=8 (1) Show encryption process. ( 10 points) (2) Calculate private key d to be used for decryption. (3) Using the value of private key d calculated in (2), perform decryption process to get M=8. A company manufactures 2 models of MP3 players. Let x represent the number (in millions) of the first model made, and let y represent the number (in millions) of the second model made. The company's revenue can be modeled by the equationR(x, y)=140x+190y 2x^2 4y^2 xyFind the marginal revenue equations R_x (x,y) = ______R_y(x,y) = _______We can achieve maximum revenue when both partial derivatives are equal to zero. Set R_z= 0 and R_y= 0 and solve as a system of equations to the find the production levels that will maximize revenue.Revenue will be maximized when: x= ______ y= ________ 9. While normal load is being supplied, an open circuit takes place in one of the pilotwires. What will be the consequences as far as the busbar differential relay isconcerned?10. Suggest an add-on to the differential relay, to avert a possible maloperation in the above scenario.11. Sketch the high impedance busbar differential protection for a three-phase busbar having three incoming and two outgoing feeders. Assume that x and y are both differentiable functions of t and are related by the equation y=cos(3x) Find dy/dt when x=/6, given dx/dt=3 when x=/6. Enter the exact answer. dy/dt= What are the advantages and disadvantages of Globalisation for Developing Countries? Your answer should include the kinds of globalisation, the various perspectives on Globalisation and the implications for managers operating in International Business.EXPLAIN IN 150 WORDS