The term (9n+1) grows without bound as n approaches infinity, the limit does not exist. Therefore, the sequence diverges.
To find the limit of the given sequence, we can use the ratio test:
StartFraction
(9(n+1)+1)! / (9(n+1))!
Over
(9n+1)! / (9n)!
EndFraction
Simplifying the expression, we get:
StartFraction
(9n+10)(9n+9)(9n+8)...(9n+2)(9n+1)
Over
(9n+1)(9n)(9n-1)...(2)(1)
EndFraction
The terms cancel out and we are left with:
StartFraction
(9n+10)(9n+9)
Over
9n(9n+1)
EndFraction
Taking the limit as n approaches infinity, we get:
lim (n → ∞) StartFraction
(9n+10)(9n+9)
Over
9n(9n+1)
EndFraction
= lim (n → ∞) StartFraction
81n² + 81n + 90
Over
81n² + 9n
EndFraction
= lim (n → ∞) StartFraction
n² + n + 10 / n² + n / 9
EndFraction
As n approaches infinity, the higher order terms dominate, so we can ignore the constants and simplify the expression to:
lim (n → ∞) StartFraction
n² / n²
EndFraction
= 1
Since the limit exists and is finite, the sequence converges. Therefore, the limit of the sequence is 1.
To find the limit of the given sequence or determine if it diverges, consider the sequence:
a_n = (9n+1)! / (9n)!
We can rewrite the sequence using the properties of factorials:
a_n = [(9n+1)(9n)(9n-1)...(9n-(9n-1))] / (9n)!
a_n = (9n+1)
Now, we'll examine the limit as n approaches infinity:
lim (n -> ∞) a_n = lim (n -> ∞) (9n+1)
Since the term (9n+1) grows without bound as n approaches infinity, the limit does not exist. Therefore, the sequence diverges.
Learn more about limit at: brainly.com/question/12207539
#SPJ11
describe the pattern 9;16;25;36;49 by words and algebraically
Given the pattern:
9, 16, 25, 36, 49
In words, this pattern represents:
the sequence of perfect squares of consecutive integers starting from 3.The numbers are obtained by squaring the integers 3, 4, 5, 6, and 7, respectively.
Algebraically, we can represent the pattern using the formula:
t(n) = (n + 2)², where t(n) is the nth termwhich of the following facts should make you the most worried about the reliability of the results of the test in this case? there is no need to worry because all of the expected cell counts are above 5. the sample was only 300 black women and is not representative of all black women. two of the six observed counts are 5 or less. not all of the cells' contributions to the chi-squared statistic are greater than 1. two of the six expected counts are less than 5.
Therefore, the reliability of the results may be questioned due to the small sample size and the fact that the observed and expected counts in some cells are too small.
The fact that two of the six observed counts are 5 or less should make you the most worried about the reliability of the results of the test in this case. This is because when the observed counts in a cell are too small, it is difficult to draw reliable conclusions from them. In such cases, the chi-squared statistic may not accurately reflect the true relationship between the variables being studied. This is because the chi-squared statistic is based on the difference between the observed counts and the expected counts, and if the observed counts are too small, the chi-squared statistic may be biased and not accurately reflect the true relationship between the variables.
Moreover, the fact that two of the six expected counts are less than 5 also raises concerns about the reliability of the results. This is because when the expected counts in a cell are too small, it may indicate that the sample size is too small or that the sample is not representative of the population being studied. In this case, the sample size was only 300 black women, which may not be representative of all black women.
To know more about chi-squared statistic visit:
https://brainly.com/question/31036349
#SPJ11
Please help me. I have so much late work I need this asap;
Answer: 7, 6 ,7
Step-by-step explanation:
I really need help please ️
The solution to all parts is shown below.
1. Using a standard normal distribution table (z-table), the corresponding percentile left of the score for a z-score of 1.93 is approximately 97.65. Therefore, the percentile can be written as an integer of 98.
2. The percentile left of the score corresponding to z-score 1.94 can be found using a standard normal distribution table (z-table).
Looking up the value of 1.94 in the z-table, we find the area under the curve to the left of 1.94 is 0.9732, or 97.32% when rounded to two decimal places.
Therefore, the corresponding percentile left of the score for z-score 1.94 is 97%.
4. Since the normal distribution is symmetrical, we know that the area in the right tail is also 0.0158.
Therefore, the total area of the shaded region is:
= 0.0158 + 0.0158 = 0.0316
7. To determine the percentage of test takers who scored lower than Lorena, we need to find the area to the left of her z-score on the standard normal distribution.
First, we calculate the z-score of Lorena's score:
z = (554 - 495) / 20 = 2.95
Using a standard normal distribution table or calculator, we find that the area to the left of z = 2.95 is approximately 0.9985. This means that approximately 99.85% of test takers scored lower than Lorena.
Therefore, Lorena scored better than about
100% - 99.85% = 0.15% of test takers, which can be rounded to 0.2%.
Learn more about z-score here:
https://brainly.com/question/15016913
#SPJ1
Find the perimeter of quadrilateral PQRS given that the coordinates of its vertices are
P(1,3),Q(3,1),R(1,−1), and S(−2,−1). You may round your answer to one decimal place.
[tex]~\hfill \stackrel{\textit{\large distance between 2 points}}{d = \sqrt{( x_2- x_1)^2 + ( y_2- y_1)^2}}~\hfill~ \\\\[-0.35em] ~\dotfill\\\\ P(\stackrel{x_1}{1}~,~\stackrel{y_1}{3})\qquad Q(\stackrel{x_2}{3}~,~\stackrel{y_2}{1}) ~\hfill PQ=\sqrt{(~~ 3- 1~~)^2 + (~~ 1- 3~~)^2} \\\\\\ ~\hfill PQ=\sqrt{( 2 )^2 + ( -2)^2} \implies \boxed{PQ=\sqrt{ 8}}[/tex]
[tex]Q(\stackrel{x_1}{3}~,~\stackrel{y_1}{1})\qquad R(\stackrel{x_2}{1}~,~\stackrel{y_2}{-1}) ~\hfill QR=\sqrt{(~~ 1- 3~~)^2 + (~~ -1- 1 ~~)^2} \\\\\\ ~\hfill QR=\sqrt{( -2)^2 + ( -2)^2} \implies \boxed{QR=\sqrt{ 8}} \\\\\\ R(\stackrel{x_1}{1}~,~\stackrel{y_1}{-1})\qquad S(\stackrel{x_2}{-2}~,~\stackrel{y_2}{-1}) ~\hfill RS=\sqrt{(~~ -2- 1~~)^2 + (~~ -1- (-1)~~)^2} \\\\\\ ~\hfill RS=\sqrt{( -3)^2 + ( 0)^2} \implies RS=\sqrt{ 9}\implies \boxed{RS=3}[/tex]
[tex]S(\stackrel{x_1}{-2}~,~\stackrel{y_1}{-1})\qquad P(\stackrel{x_2}{1}~,~\stackrel{y_2}{3}) ~\hfill SP=\sqrt{(~~ 1- (-2)~~)^2 + (~~ 3- (-1)~~)^2} \\\\\\ ~\hfill SP=\sqrt{( 3)^2 + ( 4)^2} \implies SP=\sqrt{ 25}\implies \boxed{SP=5} \\\\[-0.35em] ~\dotfill\\\\ \stackrel{ \textit{\LARGE Perimeter} }{\sqrt{8}+\sqrt{8}+3+5} ~~ \approx ~~ \text{\LARGE 13.7}[/tex]
use quantifiers and logical connectives to express the factthat every linear polynomial (that is, polynomial of degree 1) with real coefficients and where the coefficient ofx is nonzero, has exactly one real root.
The expression states that for every linear polynomial p with real coefficients and a nonzero coefficient of x, there is exactly one real root r.
For all linear polynomials with real coefficients and a nonzero coefficient of x, there exists exactly one real root. This can be expressed using the universal quantifier "for all" and the existential quantifier "there exists", connected by the logical connective "and". Additionally, the statement "exactly one real root" can be expressed using the quantifier "there exists" and the logical connective "and".
Using quantifiers and logical connectives, we can express the given fact as follows:
∀p ∃!r ((isLinearPolynomial(p) ∧ hasRealCoefficients(p) ∧ coefficientOfX(p) ≠ 0) → hasRealRoot(p, r))
Explanation:
- ∀p: For every polynomial p
- ∃!r: There exists exactly one real root r
- isLinearPolynomial(p): p is a linear polynomial (degree 1)
- hasRealCoefficients(p): p has real coefficients
- coefficientOfX(p) ≠ 0: The coefficient of x in p is nonzero
- hasRealRoot(p, r): p has a real root r
Learn more about coefficients at: brainly.com/question/1594145
#SPJ11
Work out 3.4 cos 13 degrees rounded to 2 d.p
Answer:
To work out 3.4 cos 13 degrees, you can use a calculator or a table of trigonometric functions that includes cosine values.
Using a calculator, you can simply enter "3.4 * cos(13)" and get the answer. Rounding to 2 decimal places gives:
3.4 * cos(13) ≈ 3.298
Therefore, 3.4 cos 13 degrees, rounded to 2 decimal places, is approximately equal to 3.30.
Learn more about Trigonometric Functions here:
https://brainly.com/question/14434745
help me variance and standard deviation help me
The variance is 7521.2 and the standard deviation is 86.7.
The variance is 18630.08 and the standard deviation is 136.4.
The variance is 0.0325 and the standard deviation is 0.18.
The variance is 252.8418 and the standard deviation is 15.91.
We have,
1)
Step 1: Find the mean
Mean = (106 + 121 + 152 + 234 + 347) / 5 = 192
Step 2: Find the variance
Variance = [(106-192)^2 + (121-192)^2 + (152-192)^2 + (234-192)^2 + (347-192)^2] / 5
Variance = 37606 / 5 = 7521.2
Step 3: Find the standard deviation
Standard deviation = sqrt(Variance) = sqrt(7521.2) = 86.7
2)
Step 1: Find the mean
Mean = (1450 + 1250 + 1776 + 1388 + 1340) / 5 = 1440.8
Step 2: Find the variance
Variance = [(1450-1440.8)^2 + (1250-1440.8)^2 + (1776-1440.8)^2 + (1388-1440.8)^2 + (1340-1440.8)^2] / 5
Variance = 93150.4 / 5 = 18630.08
Step 3: Find the standard deviation
Standard deviation = sqrt(Variance) = sqrt(18630.08) = 136.4
3)
Step 1: Find the mean
Mean = (7.7 + 7.4 + 7.3 + 7.9) / 4 = 7.575
Step 2: Find the variance
Variance = [(7.7-7.575)^2 + (7.4-7.575)^2 + (7.3-7.575)^2 + (7.9-7.575)^2] / 4
Variance = 0.0325
Step 3: Find the standard deviation
Standard deviation = sqrt(Variance) = sqrt(0.0325) = 0.18
4)
Step 1: Find the mean
Mean = (112 + 100 + 127 + 120 + 134 + 118 + 105 + 110) / 8 = 117.375
Step 2: Find the variance
Variance = [(112-117.375)^2 + (100-117.375)^2 + (127-117.375)^2 + (120-117.375)^2 + (134-117.375)^2 + (118-117.375)^2 + (105-117.375)^2 + (110-117.375)^2] / 8
Variance = 2022.7344 / 8 = 252.8418
Step 3: Find the standard deviation
Standard deviation = sqrt(Variance) = sqrt(252.8418) = 15.91
Therefore,
The variance is 7521.2 and the standard deviation is 86.7.
The variance is 18630.08 and the standard deviation is 136.4.
The variance is 0.0325 and the standard deviation is 0.18.
The variance is 252.8418 and the standard deviation is 15.91.
Learn more about standard deviation here:
https://brainly.com/question/13905583
#SPJ1
Find the y-intercept of the line on the graph.
Step-by-step explanation:
'y - intercept' is shorthand for ' y-axis intercept' ....or the value of the graph where it crosses the y - axis
this one is point (0,3) or y-intercept = 3
Find the y-intercept of the line on the graph.
Meghan has a jar containing 15 counters. There are only blue counters, green counters and red counters in the jar.
Hector is going to take at random one of the counters from his bag of 12 counters. He will look at the counter and put the counter back into the bag.
Hector is then going to take at random a second counter from his bag. He will look at the counter and put the counter back into the bag.
Meghan is then going to take at random one of the counters from her jar of counters. She will look at the counter and put the counter back into the jar.
The probability that the 3 counters each have a different colour is 7/24
(c) Work out how many blue counters there are in the jar.
Find the value of sides RS
Answer:
RS = 15 units
Step-by-step explanation:
Given:
RT = 9
TS = 12
To find: Length of RS
Proof:
In right triangle RTS,
[tex]RT^{2} + TS^{2} = RS^{2}[/tex]
[tex]9^{2} + 12^{2} = RS^{2}[/tex]
[tex]81 + 144 = RS^{2}[/tex]
[tex]225 = RS^{2}[/tex]
[tex]\sqrt{225} = RS[/tex]
15 = RS
∴ The length of RS is 15 units.
you are a bank officer. Elena comes to you seeking a loan. She tells you that she has sure-fire idea for a business that simply cannot fail. She stays further that the bank will not be risking a penny by granting her the loan. Do Elenas claims encourage you of discourage you from approving the loan.
As a bank officer, Elena's claims would not be enough to encourage me to approve the loan. It's important to look at the details of her business plan, her financial history and her credit score before making a decision. Even if Elena believes that her business idea cannot fail, there is always a risk involved in lending money. It's important to assess the risk and make a decision based on the facts, rather than on promises or guarantees.
Answer:
Step-by-step explanation:
Her claims encourage you.
A basket of beads contains 8 red beans , 6 yellow beads, and 6 greens . A bead will be drawn from the basket and replaced 150 times. What is the reasonable prediction for the number of times a green bead is drawn
Step-by-step explanation:
green is 6 out of a total of ( 8+6+6 = 20 ) beads
so 6/20 ths of the time it should be a green bead
6/20 * 150 = 45 times should be green
Find the sector area for the following
[tex]\textit{area of a sector of a circle}\\\\ A=\cfrac{\theta r^2}{2} ~~ \begin{cases} r=radius\\ \theta =\stackrel{radians}{angle}\\[-0.5em] \hrulefill\\ r=6\\ \theta = \frac{2\pi }{3} \end{cases}\implies A=\cfrac{~~ \frac{2\pi }{3 }6^2 ~~}{2}\implies A=12\pi \stackrel{ using~\pi =3.14 }{\implies A=37.68}[/tex]
WORTH 20 POINTS
PLS HELP ME AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
A ratio is a relationship in which for every x units of one quantity there are y units of another quantity. Ratios are considered to be equivalent if they express the same x/y. A ratio compares 2 like or unlike quantities by division. Ratios can be shown visually using a graph or a ratio table.
p(x) = 2x^3 -5x^2 + 7x - 3 find p(2) , p(0), p(-1), p(-2)
POLYNOMIAL CLASS 9 QUESTION
PLS, I NEED ANSWER FAST
The value of p(2) = 7, p(0) = -3 , p(-1) = -17 and p(-2) = -53 when polynomial is p(x) = 2x³ - 5x² + 7x - 3 with one variable.
Given that,
The polynomial is p(x) = 2x³ - 5x² + 7x - 3
We have to find the value of p(2), p(0), p(-1) and p(-2).
We know that,
Take polynomial,
p(x) = 2x³ - 5x² + 7x - 3
Now, to find p(2) take x = 2 in polynomial
By substituting,
p(2) = 2(2)³ - 5(2)² + 7(2) - 3
p(2) = 16 - 20 + 14 - 3
p(2) = 30 - 23
p(2) = 7
Now, to find p(0) take x = 0 in polynomial
p(0) = 2(0)³ - 5(0)² + 7(0) - 3 [multiplication]
p(0) = 0 - 0 + 0 - 3
p(0) = -3
Now, to find p(-1) take x = -1 in polynomial
p(-1) = 2(-1)³ - 5(-1)² + 7(-1) - 3
p(-1) = -2 - 5 - 7 - 3 [subtraction]
p(-1) = -17
Now, to find p(-2) take x = -2 in polynomial
p(-2) = 2(-2)³ - 5(-2)² + 7(-2) - 3
p(-2) = -16 - 20 - 14 - 3
p(-2) = -53
Therefore, The value of p(2) = 7, p(0) = -3 , p(-1) = -17 and p(-2) = -53.
To know more about polynomial visit:
https://brainly.com/question/21089564
https://brainly.com/question/27453285
Wyatt’s math teacher wrote the following data set on the board.
10, 2.8, 6.5, 21.6, 8.2, 9.3, 4, 2.8
What is the range of the data?
Answer:
18.8
Step-by-step explanation:
To find the range of a data set, you subtract the smallest value from the largest value.
In this case, the smallest value is 2.8 and the largest value is 21.6.
Range = largest value - smallest value = 21.6 - 2.8 = 18.8
Therefore, the range of the data set is 18.8.
The points D(−3,−4), E(5,0), F(3,4), and G(−5,0) form rectangle DEFG. Plot the points then click the "Graph Quadrilateral" button. Then find the area of the rectangle.
If the points D(−3,−4), E(5,0), F(3,4), and G(−5,0) form rectangle DEFG then the area is 40 square units.
The length of the rectangle can be found by finding the distance between D and E (or F and G), which is:
√(5 - (-3))² + (0 - (-4))²] = √8² + 4²
= √80
= 4√5
The width of the rectangle can be found by finding the distance between D and G (or E and F), which is:
√-5 - (-3))² + (0 - (-4))²
= √(-2)²+ 4²
= √20
= 2√5
Therefore, the area of the rectangle is:
length x width = 4√5 x 2√5
= 8 x 5
= 40
Hence, 40 square units is area of the given rectangle DEFG.
To learn more on Area click:
https://brainly.com/question/20693059
#SPJ1
which inference method can be used to test for a difference between the average iq scores of identical twins raised by birth parents and in a foster home? circle the correct choice.
The appropriate inference method to test for a difference between the average IQ scores of identical twins raised by birth parents and in a foster home is paired t-test.
A paired t-test is used when comparing two sets of observations that are paired or matched in some way, such as in the case of identical twins. In this scenario, the twins are matched based on their genetic makeup, and their IQ scores are compared based on their different upbringing environments (birth parents vs. foster home). The paired t-test allows us to analyze the difference between the paired observations (IQ scores) and determine if there is a statistically significant difference between the two groups.
Know more about paired t-test here:
https://brainly.com/question/29978671
#SPJ11
find the confidence interval. thirty students received scholarship averaging $7,000 with a standard deviation of $500. find the 99% confidence interval.
We can use the formula for the confidence interval for a population mean with a known standard deviation. Plugging in the values, we get the interval (6817.22, 7182.78).
To find the 99% confidence interval for the scholarship averages of thirty students, we need to use the following formula:
CI = X ± zα/2 * (σ/√n)
Where
X = sample mean ($7,000 in this case)
zα/2 = the z-score corresponding to the desired confidence level (99% in this case), which is 2.576
σ = population standard deviation ($500 in this case)
n = sample size (30 in this case)
Substituting these values into the formula, we get:
CI = 7000 ± 2.576 * (500/√30)
Simplifying this expression, we get:
CI = 7000 ± 182.78
Therefore, the 99% confidence interval for the scholarship averages of thirty students is
(7000 - 182.78, 7000 + 182.78)
= (6817.22, 7182.78)
So we can say with 99% confidence that the true population mean scholarship amount lies within this interval.
To know more about confidence interval:
https://brainly.com/question/31482147
#SPJ4
how many liters of oil are recquired to supply the electricalenergy needs of an average home for a year?
Approximately 897 liters of oil would be required to supply the electrical energy needs of an average home for a year. Keep in mind that this is a rough estimate, as factors like energy consumption and power plant efficiency can vary.
To answer your question, we need to consider a few factors such as the size of the home and the energy consumption of the household. However, on average, a household consumes around 10,000 kilowatt-hours (kWh) of electricity per year. If we convert this into liters of oil, we can use a conversion factor of 0.2778 liters of oil per kWh. Therefore, an average household would require around 2,778 liters of oil per year to supply their electrical energy needs.
It is important to note that this is just an estimate and the actual amount of oil required may vary depending on various factors such as the efficiency of the heating system and the energy usage habits of the household. It is also worth considering alternative energy sources such as solar or wind power, which can reduce the dependence on oil and lower the carbon footprint of the household.
In conclusion, an average household would require approximately 2,778 liters of oil to supply their electrical energy needs for a year. However, it is important to explore alternative energy sources and implement energy-saving measures to reduce the reliance on oil and minimize environmental impact.
The number of liters of oil required to supply the electrical energy needs of an average home for a year depends on the home's energy consumption and the efficiency of the power plant converting the oil into electricity. On average, a US household consumes about 10,649 kilowatt-hours (kWh) of electricity per year.
A typical oil-fired power plant can produce around 1,885 kWh of electricity from one barrel (159 liters) of oil, with an efficiency rate of around 33%. To calculate the number of liters needed for a year, we can use the formula:
(Number of kWh per year) / (kWh per liter of oil) = Liters of oil needed
First, let's find the kWh per liter of oil: 1,885 kWh/barrel * (1 barrel/159 liters) ≈ 11.86 kWh/liter
Now we can calculate the liters of oil needed: 10,649 kWh/year / 11.86 kWh/liter ≈ 897 liters/year
So, approximately 897 liters of oil would be required to supply the electrical energy needs of an average home for a year. Keep in mind that this is a rough estimate, as factors like energy consumption and power plant efficiency can vary.
To know more about Average visit:
https://brainly.com/question/8501033
#SPJ11
If x = 5, then which equation is NOT true?
-2x ≤ 12
x - 2>7
2x < 12
x-7<2
Answer:
x - 2 > 7
Step-by-step explanation:
Substitute the value 5 for x.
x = 5
-2x ≤ 12
-2(5) ≤ 12
-10 ≤ 12 True
-10 is less than or equal to 12
x - 2 > 7
5 - 2 > 7
3 > 7 Not true
3 is greater than 7
2x < 12
2(5) < 12
10 < 12 True
10 is less than 12
x - 7 < 2
5 - 7 < 2
-2 < 2 True
-2 is less than 2
a growing farming conglomerate increases its water usage at a rate of 7% every year. if it used 28,390 megaliters of water this year, then how much water will it use 5 years from now?
The farming conglomerate will use approximately 36,912.51 megaliters of water 5 years from now.
To calculate the amount of water the farming conglomerate will use 5 years from now, we can use the given information that its water usage increases at a rate of 7% every year.
Let's denote the current water usage as W₀ and the water usage after 5 years as W₅.
We know that W₅ = W₀ * (1 + r)^n, where r is the growth rate (in decimal form) and n is the number of years.
In this case, W₀ = 28,390 megaliters, r = 7% = 0.07, and n = 5.
Substituting these values into the formula, we have:
W₅ = 28,390 * (1 + 0.07)^5
Calculating this expression, we get:
W₅ ≈ 28,390 * (1.07)^5 ≈ 36,912.51 megaliters
Know more about growth rate here:
https://brainly.com/question/18485107
#SPJ11
can you help me with this math
What multiplies to -25 and adds to 0?
Answer:
-5 and 5
Step-by-step explanation:
[tex]-5*5=-25\\\\-5+5=0[/tex]
Use the interactive graph below to sketch a graph of y = 310g, (-X) - 9.
The sketch of the graph of the logarithm function is added s an attachment
Sketching the graph of the logarithm functionFrom the question, we have the following parameters that can be used in our computation:
y = 3log₂(-x) - 9
The above equations is an illustration of a logarithm function that has been transformed using the following
Reflected across the y-axisVertically stretched by a factor of 3Translated down by 9 unitsNext, we plot the graph using a graphing tool
The graph of the logarithm function is added as an attachment
Read more about logarithm equations at
https://brainly.com/question/28041634
#SPJ1
a customer can choose one of two amplifiers, one of four compact disc players, and one of eight speaker models for an entertainment system. determine the number of possible system configurations.
There are 64 possible system configurations that can be made from the given choices of two amplifiers, four CD players, and eight speaker models.
To determine the number of possible configurations, we multiply the number of choices available for each component of the system. Since the customer can choose one of two amplifiers, one of four CD players, and one of eight speaker models, the total number of possible configurations is given by:
2 (amplifiers) × 4 (CD players) × 8 (speakers) = 64
Therefore, there are 64 possible system configurations that can be made from the given choices of two amplifiers, four CD players, and eight speaker models.
Learn more about Configurations here:brainly.com/question/30279846
#SPJ11
Approximate the area under the function between a and b using a left-hand sum with the given number of intervals. f(x) = x² − x a = 0 b=3 3 Intervals
Which measure of central tendency is used to determine the average annual percent
increase?
A) Mode
B) Arithmetic mean
C) Median
D) Weighted mean
E) Geometric mean
The geometric mean is used to determine the average annual percent increase, as it accurately accounts for compounding growth over multiple periods. The correct option is E.
The measure of central tendency that is typically used to determine the average annual percent increase is the arithmetic mean. This measure takes the sum of all the values and divides it by the total number of values.
It is important to note that other measures, such as the geometric mean, can also be used in certain situations. But for most cases, the arithmetic mean is the go-to measure for determining the average annual percent increase.
To know more about geometric mean visit:-
https://brainly.com/question/29199001
#SPJ11
