Find the midpoint of the segment with the following endpoints. (
10
,
5
)
and
(
6
,
9
)
(10,5) and (6,9)

The shortest distance, in units, between the two houses is 10 units.

Remember that the distance between two points (x₁, y₁) and (x₂, y₂) is given by the formula:

distance = √( (x₂ - x₁)² + (y₂ - y₁)²)

Here we want to find the distance between the points (1,2) and (7, 10), using the formula we will get:

distance = √( (7 - 1)² + (10 - 2)²)

distance = 10 units.

Learn more about distance at:

https://brainly.com/question/7243416

#SPJ1

As we have proved that L1 = L2 by using the accumulation point.

Let f: D → R be a function, where D is a subset of real numbers and xo is an accumulation point of D. Let L1 and L2 be two limits of f as x approaches xo.

According to the definition of the limit, for any ε > 0, there exists a δ1 > 0 such that if 0 < |x - xo| < δ1, then |f(x) - L1| < ε. Similarly, for any ε > 0, there exists a δ2 > 0 such that if 0 < |x - xo| < δ2, then |f(x) - L2| < ε.

We want to show that L1 = L2. To do this, we will use the epsilon-delta definition of the limit. Let ε > 0 be arbitrary.

Since xo is an accumulation point of D, there exists a sequence {xn} in D{xo} that converges to xo. By definition of convergence, we can say that for any δ > 0, there exists a natural number N such that for all n > N, |xn - xo| < δ.

Now, choose δ = min{δ1, δ2}. Then, there exists a natural number N such that for all n > N, |xn - xo| < δ.

For this value of n, we have:

|f(xn) - L1| < ε (by the definition of the limit L1)

|f(xn) - L2| < ε (by the definition of the limit L2)

Taking the absolute value of the difference between these two inequalities, we get:

|L1 - L2| ≤ |f(xn) - L1| + |f(xn) - L2| < 2ε

Since ε was arbitrary, this means that |L1 - L2| < 2ε for all ε > 0.

Therefore, |L1 - L2| = 0, which implies that L1 = L2.

To know more about accumulation point here

https://brainly.com/question/4584485

#SPJ4

The variance is calculated by subtract the budgeted production volume from  actual production volume, and multiply that difference by  standard cost. If the result is positive, favorable, and if it is negative, unfavorable.

The difference above the actual and budgeted production volumes, multiplied by the average cost per unit, is known as the production volume variance. The formula for calculating the production volume variance is as follows:

Production Volume Variance = (Actual Production Volume ₋Budgeted Production Volume) × Standard Cost per unit

If the actual production volume is higher than the budgeted production volume, the production volume variance will be favorable because it means that the company produced more than anticipated, which could lead to increased revenue. On the other hand, if the actual production volume is lower than the budgeted production volume, the production volume variance will be unfavorable because it means that the company produced less than anticipated, which could lead to decreased revenue.

To know more about volume visit

https://brainly.com/question/1578538

#SPJ4

The length of the cuboid is 10 cm .

As the cuboid has six rectangular faces, the total surface area of the cuboid is calculated as follows: Assume that, l, w, h be the length, width, and height of the cuboid respectively. Therefore, the total surface area of the cuboid is 2 (lh + lw+ hw) square units.

Surface area of cuboid = 340 cm²

∵ Surface area of cuboid = 2(lb + bh + hl)

So,

⇒ 2(lb + bh + hl) = 340

⇒ 2(l × 8 + 8 * 5 + 5 * l) = 340

⇒ 2(8l + 40 + 5l) = 340

⇒ 13l + 40 = 340/2

⇒ 13l + 40 = 170

⇒ 13l = 170 - 40

⇒ 13l = 130

⇒ l = 130/13

⇒ l = 10 cm

Learn more about Surface area if cuboid at:

https://brainly.com/question/26755915

#SPJ1

The given question is incomplete, complete question is:

The surface area of a cuboid is 340 cm2. If its breadth is 8 cm and height is 5 cm, then find its length.

Step-by-step explanation:

And is 36

10 + 5 + 4 + 3 + (10 - 4) + 5 + 3 = 36.

According to the t statistic, the number of individuals who are participated in the entire study is 38 (option b)

To solve this problem, we need to use the formula for the t statistic, which is given by:

t = (M₁ - M₂) / (s√(1/n₁ + 1/n₂))

Here, M₁ and M₂ are the sample means of two independent groups, s is the pooled standard deviation of the two groups, and n₁ and n₂ are the sample sizes of the two groups.

Now, let's consider the formula for the degrees of freedom of the t statistic, which is given by:

df = n₁ + n₂ - 2

Here, df represents the number of independent observations that are available to estimate the population parameters. In our case, df is given as 36, which means that we have 36 independent observations to estimate the population parameters.

Using the above equation, we can rearrange the terms to find the sample size of one of the groups, say n₁, in terms of the other group's sample size n₂:

n₁ = df + 2 - n₂

We can substitute the value of df = 36 and try different values of n₂ to see which one gives us an integer value for n₁. We can start with n₂ = 1 and keep increasing it until we get an integer value for n₁.

If we take n₂ = 1, then:

n₁ = df + 2 - n₂ = 36 + 2 - 1 = 37

This gives us an integer value for n₁, which means that the total number of individuals in the study is:

n = n₁ + n₂ = 37 + 1 = 38

Therefore, the answer is option (b) 38.

To know more about t-statistic here

https://brainly.com/question/15236063

#SPJ4

A binomial distribution is a probability distribution that describes the number of successes in a fixed number of independent trials with a constant probability of success for each trial.

In the case of a simple random sample, the trials are the individual observations in the sample, and the success or failure of each observation is determined by whether it meets some criterion of interest.

For example, suppose we are interested in the proportion of voters in a certain population who support a particular candidate. We take a simple random sample of n voters from the population and record whether each one supports the candidate or not. In this case, each observation in the sample can be considered a trial with a binary outcome (support or not support), and the proportion of supporters in the sample is the count of successes.

Learn more about binomial distribution

https://brainly.com/question/31197941

#SPJ4

The standard form for the quadratic function is g(x) = x² + 2x - 1.

The standard form for a quadratic function is:

f(x) = ax² + bx + c

where a, b, and c are constants.

Out of the given options, the quadratic function that is already in standard form is:

g(x) = x² + 2x - 1

Learn more about Quadratic Function here:

https://brainly.com/question/18958913

#SPJ1

The probability is 1, or 100%, that a randomly selected person from this sample believed either the true headline or the false headline.

Probability is a measure of the likelihood or chance that a specific event will occur. It is expressed as a number between 0 and 1, where 0 indicates that an event is impossible and 1 indicates that an event is certain to occur.

The probability that a randomly selected person from this sample believed the true headline or believed the false headline can be calculated by adding the number of people who believed the true headline to the number of people who believed the false headline and dividing by the total sample size.

In this case, the number of people who believed the true headline is 120, and the number of people who believed the false headline is 80. Therefore, the total number of people who believed either headline is 120 + 80 = 200.

The total sample size is also 200, so the probability that a randomly selected person from this sample believed the true headline or believed the false headline is:

(120 + 80) / 200 = 200 / 200 = 1

Therefore, the probability is 1, or 100%, that a randomly selected person from this sample believed either the true headline or the false headline.

To know more about Probability visit:

https://brainly.com/question/13604758

#SPJ4

Complete Question:

In a sample of 200 people, 120 believed a true headline and 80 believed a false headline. What is the probability that a randomly selected person from this sample believed the true headline or believed the false headline?

When both countries produce at full employment, Country A should focus on producing computers, and Country B should focus on producing steel. This arrangement allows them to maximize their resources and benefit from trade.

Based on the given production alternatives for countries A and B, the correct statement regarding their production of computers and steel at full employment is:

"Country A has a comparative advantage in producing computers, while Country B has a comparative advantage in producing steel."

Here's a step-by-step explanation:

1. Calculate the opportunity cost for each country:
- Country A: To produce 1 computer, they give up 1 unit of steel (100 computers = 100 units of steel).
- Country B: To produce 1 computer, they give up 4 units of steel (20 computers = 80 units of steel).

2. Identify the comparative advantage:
- Country A has a lower opportunity cost for producing computers (1 unit of steel), so they have a comparative advantage in computer production.
- Country B has a higher opportunity cost for producing computers but a lower opportunity cost for producing steel, so they have a comparative advantage in steel production.

Thus, when both countries produce at full employment, Country A should focus on producing computers, and Country B should focus on producing steel. This arrangement allows them to maximize their resources and benefit from trade.

to learn more about full employment click here:

brainly.com/question/30483563

#SPJ11

A) I only . In order to use t-procedures for constructing a confidence interval, the samples should be approximately normally distributed.

Option I suggests that one sample is roughly symmetric and the other is moderately skewed left, but there are no outliers. This suggests that the normality condition may be met and t-procedures can be used. Option II indicates that both samples are roughly symmetric, but one sample has an outlier. This may violate the assumption of normality and t-procedures may not be appropriate.

Option III suggests that both samples are strongly skewed to the right, which also violates the normality assumption and t-procedures are not recommended.

Therefore, the correct answer is A) I only.

To know more about  confidence interval  click on below link :

https://brainly.com/question/30229866#

#SPJ11

The volume of the solid is 45/2 cubic units.

To find the volume of the solid, we need to integrate the area of each cross-section perpendicular to the x-axis along the interval [1, 4]. Since the cross-sections are rectangles with height x, we need to find the width of each rectangle at each value of x.

First, let's find the intersection points of the given curves. We can solve

[tex]y = x^2 - 5x + 7[/tex]and y = 3 to get:

[tex]x^2 - 5x + 7 = 3\\x^2 - 5x + 4 = 0\\(x - 1)(x - 4) = 0[/tex]

So the intersection points are (1, 3) and (4, 3).

Now, at each x value between 1 and 4, the width of the rectangle is the difference between the y values of the two bounding curves, which is:

[tex]3 - (x^2 - 5x + 7) = -x^2 + 5x - 4[/tex]

Thus, the volume of the solid is:

[tex]V = \int [1,4] (-x^3 + 5x^2 - 4x) dx[/tex]

Integrating, we get:

[tex]V = [-1/4 x^4 + 5/3 x^3 - 2x^2] from x = 1 to x = 4\\V = [(-1/4 \times 4^4 + 5/3 \times 4^3 - 2 \times 4^2) - (-1/4 \times 1^4 + 5/3 \times 1^3 - 2 \times 1^2)]\\V = [(-64/4 + 80/3 - 8) - (-1/4 + 5/3 - 2)]\\V = 45/2[/tex]

for such more question on volume

https://brainly.com/question/6204273

#SPJ11

a. The sample space is 5

b. Each simple event in the sample space has a probability of 1/5 or 0.2.

c. The approach used is the classical approach.

In probability theory, a sample space is the set of all possible outcomes of an experiment or a random phenomenon.

It is denoted by the symbol S and is a fundamental concept in probability theory. The sample space includes all the possible outcomes, regardless of whether they are desirable, undesirable, or likely to occur.

Here we have

A quiz contains a multiple-choice question with five possible answers, only one of which is correct.

A student plans to guess the answer because he knows absolutely nothing about the subject.

a. The sample space for the multiple-choice question with five possible answers is S = {A, B, C, D, E} i.e S = 5

Where A, B, C, D, and E denote the possible answers.

b. Since the student plans to guess the answer and knows nothing about the subject, he has an equal chance of selecting any of the five possible answers.

Hence, each simple event in the sample space S has a probability of 1/5 or 0.2.

c. The approach used to assign probabilities to the simple events in the sample space is the classical approach or the principle of equally likely outcomes.

This approach assumes that all outcomes in the sample space are equally likely to occur, and assigns probabilities based on the number of favorable outcomes over the total number of possible outcomes.

d. The probabilities assigned to the simple events in part (b) represent the likelihood of the student guessing the correct answer or any of the incorrect answers.

Since all the events in the sample space are mutually exclusive and collectively exhaustive, the sum of the probabilities of all simple events equals 1, which indicates that the student will always select one of the five possible answers.

Therefore,

a. The sample space is 5

b. Each simple event in the sample space has a probability of 1/5 or 0.2.

c. The approach used is the classical approach.

Learn more about Sample space at

https://brainly.com/question/30206035

#SPJ4

Answer:

Step-by-step explanation:

Every mile traveled along the stream, the elevation changes by 50 feet/mile.

The gradient of the stream can be calculated by dividing the elevation change by the distance traveled. In this case, the stream has an elevation change of 100 feet over a distance of 2 miles. Thus, the gradient can be calculated as:

Gradient = Elevation change / Distance traveled

= 100 feet / 2 miles

= 50 feet/mile

The gradient is an important concept in many fields, including geology, hydrology, and civil engineering. It represents the rate at which a physical quantity, such as elevation or temperature, changes with distance. A steep gradient indicates a rapid change, while a gentle gradient indicates a slow change.

Therefore, the answer is option (a) 50 feet/mile. This means that for every mile traveled along the stream, the elevation changes by 50 feet.

To learn more about Gradient here

https://brainly.com/question/30249498

#SPJ4

Problem 1: Three mutually tangential circles with radii located at A, B, and C, have radii of 20 ft, 28 ft, and 41 ft, respectively. Find the measures of angles A, B, and C. Round to the nearest tenth of a degree.

To solve this problem, we can use a result from Euclidean geometry that states that the angle between two tangents drawn from an external point to a circle is equal to half the difference of the measures of the intercepted arcs. We can apply this result to the three circles and the external point where they are tangential to each other.

Let O be the external point of tangency, and let D, E, and F be the points of tangency of the circles with radii 20 ft, 28 ft, and 41 ft, respectively. Then, we can form the triangle DEF, where the angles at D, E, and F are 90 degrees, and the sides are the radii of the circles.

Let x, y, and z be the measures of the arcs intercepted by the tangents at D, E, and F, respectively. Then, we have:

x + y = 180 - A

y + z = 180 - B

x + z = 180 - C

Also, using the fact that the sum of the angles in a triangle is 180 degrees, we have:

A + B + C = 180

Substituting the first three equations into the last one, we obtain:

2x + 2y + 2z = 360

x + y + z = 180

Adding these two equations, we get:

3(x + y + z) = 540

x + y + z = 180

Therefore, Option A) x = 70.3 degrees, y = 60.7 degrees, and z = 49 degrees. Thus, the measures of angles A, B, and C are approximately 70.3 degrees, 59.7 degrees, and 42.8 degrees, respectively (rounded to the nearest tenth).

Problem 2: Determine the perimeter of a triangle with vertices defined by the given points to the nearest tenth. A(1,1), B(2,5), C(5,1)

To solve this problem, we can use the distance formula, which gives the distance between two points in a plane. Let d(P,Q) be the distance between points P and Q. Then, we have:

d(A,B) = [tex]\sqrt{((2-1)^2 + (5-1)^2)}[/tex] = √17

d(B,C) = [tex]\sqrt{(5-2)^2 + (1-1)^2)}[/tex] = 3

d(C,A) = [tex]\sqrt{(1-5)^2 + (1-1)^2)}[/tex] = 4

Therefore, the perimeter of triangle ABC is approximately 9.8 units Option A) 9.8 units is the correct perimeter of triangle ABC.

To know more about Area here

https://brainly.com/question/27683633

#SPJ4

If the correlation coefficient r is -1.0, it means that there is a perfect negative linear relationship between X and Y.

a) As X scores increase, Y scores decrease in a perfectly consistent manner. The magnitude is strong.

b) If the correlation coefficient r is +0.32, it means that there is a positive linear relationship between X and Y, but it is a weak relationship. As X scores increase, Y scores tend to increase, but not in a perfectly consistent manner. The magnitude is weak.

c) If the correlation coefficient r is -0.10, it means that there is a weak negative linear relationship between X and Y. As X scores increase, Y scores tend to decrease, but not in a consistent manner. The magnitude is weak.

d) If the correlation coefficient r is -0.71, it means that there is a strong negative linear relationship between X and Y. As X scores increase, Y scores tend to decrease in a consistent manner. The magnitude is strong.

To learn more about correlation coefficient here:

https://brainly.com/question/27226153

#SPJ1

The hypothesis test is a one-tailed test, since we are testing for a specific direction (greater than 72%).

An assumption is said to as a hypothesis when it is supported by evidence. Any investigation that turns the research questions into predictions must start here. Variables, the population, and the relationships between the variables are among its constituent parts.

The hypotheses for the test are:

H0: p = 0.72 (null hypothesis)

Ha: p > 0.72 (alternative hypothesis)

The claim is that the proportion of college students who recycle is greater than 72%, which corresponds to the alternative hypothesis.

The hypothesis test is a one-tailed test, since we are testing for a specific direction (greater than 72%).

Learn more about hypothesis on:

https://brainly.com/question/14587073

#SPJ4

The exponential model for the bat population t years after 2012 is [tex]n(t) = 220000e^{(0.0217t)}[/tex]

What is the exponential function?

An exponential function is a mathematical function of the form:

f(x) = aˣ

where "a" is a constant called the base, and "x" is a variable. Exponential functions can be defined for any base "a", but the most common base is the mathematical constant "e" (approximately 2.71828), known as the natural exponential function.

To find an exponential model of the form n(t) = n0ert, we need to first find the value of r, which is the continuous growth rate.

We can use the formula r = ln(2)/d, where d is the doubling time.

d = 32 years

r = ln(2)/d

r = ln(2)/32

r = 0.0217 (rounded to four decimal places)

Now we can substitute the given values into the exponential model equation:

n(t) = n0ert

[tex]n(t) = 220000e^{(0.0217t)}[/tex]

Hence, the exponential model for the bat population t years after 2012 is [tex]n(t) = 220000e^{(0.0217t)}[/tex].

To learn more about the exponential function visit:

https://brainly.com/question/30241796

#SPJ4

The dimensions of the rectangle with area 343 m2 and the smallest possible perimeter are 7m (smaller value) and 49m (larger value). True.

To find the dimensions of the rectangle with the smallest perimeter, we need to use the formula for the perimeter of a rectangle, which is P = 2l + 2w, where l and w are the length and width of the rectangle. We also know that the area of the rectangle is 343 m2, so we can write:

lw = 343

To find the smallest possible perimeter, we need to minimize the expression P = 2l + 2w subject to the constraint lw = 343. We can use the method of Lagrange multipliers to solve this optimization problem:

L = 2l + 2w - λ(lw - 343)

Taking partial derivatives with respect to l, w, and λ and setting them equal to zero, we get:

2 - λw = 0
2 - λl = 0
lw - 343 = 0

Solving for l and w, we get:

l = 7
w = 49

Substituting these values back into the expression for the perimeter, we get:

P = 2l + 2w = 2(7) + 2(49) = 112

Therefore, the dimensions of the rectangle with area 343 m2 and the smallest possible perimeter are 7m (smaller value) and 49m (larger value), and this is true.

Learn more about perimeter of rectangle here: brainly.com/question/4074407

#SPJ11

The function that relates the distance traveled d to the time t is d(t) = 120t.

In Mathematics and Science, speed is the distance covered by a physical object per unit of time.

In Mathematics and Science, the speed of any a physical object can be calculated by using this formula;

Speed = distance/time

Speed = 360/3

Speed = 120 kilometers per hours.

Making distance the subject of formula, we have:

Distance, d(t) = speed × time

Distance, d(t) = 120 × t

Distance, d(t) = 120t

Read more on speed here: https://brainly.com/question/19260635

#SPJ1

Complete Question:

A train leaves the station at time t0. Traveling at a constant​ speed, the train travels 360 kilometers in 3 hours. Write a function that relates the distance traveled d to the time t

1) P''(23) is approximately equal to -0.06.

2) The value is negative, we can conclude that the rate of change of the percentage of mothers who work outside the home and have children younger than age 6 years was decreasing in the year 2003.

The function P(t) = 33.55[tex](t + 5)^{0.205}[/tex] gives an approximation of the percentage of mothers who work outside the home and have children younger than 6 years old.

The variable t represents the time in years since the beginning of 1980, so t = 0 corresponds to the year 1980. The function is valid for 0 ≤ t ≤ 32, which means it covers the years from 1980 to 2012.

To find the second derivative of P with respect to t, we need to take the derivative of the derivative of P. First, we take the derivative of P(t):

P'(t) = 7.028[tex](t + 5)^{-0.795}[/tex]

Then, we take the derivative of P'(t) to get P''(t):

P''(t) = -5.578[tex](t + 5)^{-1.795}[/tex]

To compute P''(23), we simply substitute t = 23 into the expression for P''(t):

P''(23) = -5.578[tex](23 + 5)^{-1.795}[/tex] = -0.06

So, P''(23) is approximately equal to -0.06.

Specifically, if P''(t) is negative, then the rate of change of P is decreasing. If P''(t) is positive, then the rate of change of P is increasing. If P''(t) is zero, then the rate of change of P is neither increasing nor decreasing, but may be changing direction.

To know more about percentage here

https://brainly.com/question/13729841

#SPJ4

95% confident that the true population mean backpack weight falls between 49.06 and 54.94 ounces.

To construct a 95% confidence interval for the true population mean backpack weight, we can use the following formula:

Confidence interval = mean weight ± (critical value x standard error)

Where the critical value is determined based on the level of confidence and the degrees of freedom (n-1), and the standard error is calculated as the population standard deviation divided by the square root of the sample size.

In this case, since we have a sample size of 27, the degrees of freedom would be 26. Using a t-distribution table, we can find the critical value for a 95% confidence level with 26 degrees of freedom to be 2.056.

The standard error can be calculated as:

standard error = 7.7 / sqrt(27) = 1.48

Therefore, the 95% confidence interval can be calculated as:

Confidence interval = 52 ± (2.056 x 1.48) = (49.06, 54.94)

This means that we can be 95% confident that the true population mean backpack weight falls between 49.06 and 54.94 ounces, based on the sample of 27 backpacks with a mean weight of 52 ounces and a population standard deviation of 7.7 ounces.

Visit here to learn more about confidence interval brainly.com/question/13067956

#SPJ11

Answer:

120

Step-by-step explanation:

since 60 = 1 hour

60 divided by 4 = 15

15 x 8 = 120

Answer:

72

Step-by-step explanation:

50 middle school students preferred cake batter-flavored frozen yogurt, calculated by applying the percentage given to the total number of students surveyed.

This question requires a basic understanding of percentages and how to apply them in a real-world context. The circle graph indicates that 10 percent of the students surveyed prefer cake batter as their favorite frozen yogurt flavor.

We're given that the total number of students surveyed is 500. To figure out the number of students who prefer cake batter, we multiply the total number of students by the percentage that prefer cake batter, expressed as a decimal.

So, 500 (total students) * 10/100 (percentage who prefer cake batter) = 50 students.

Therefore, 50 middle school students preferred cake batter-flavored frozen yogurt.

https://brainly.com/question/329987

#SPJ2

If the number 23 is added to the list, the measurement that will not change would be C. Mode.

The mode is a helpful measure of central tendency for nominal or categorical data, representing the most frequently occurring value in a given set. In this specific list of numbers, the mode is 2 since it appears twice while other integers appear only once.

If we were to add 23 to the string of numbers, the mode would remain identical since "2" still maintains its position as the most commonly appearing number.

Find out more on mode at https://brainly.com/question/30769636

#SPJ1

Answer:

If the coefficient of determination is .798, then 79.8% of the data about this regression line is explained, so 20.2% of the data about this regression line is unexplained.

The length of his rectangular field is 35 metres.

Farmer Fred has a rectangle field. 2 / 5 of the field is planted with carrots and the rest is for cabbages.

Therefore, the width of the field is 13 metres. The length of the field can be found as follows:

area of the carrot section = 182 m²

let

x = area of the field.

Therefore,

2 / 5 x  = 182

cross multiply

2x = 910

x = 910 / 2

x = 455 m²

Therefore,

length of the field = 455 / 13

length of the field = 35 metres.

learn more on rectangle here: https://brainly.com/question/29123947

#SPJ1

Answer:

X = 68

x - 24 = 44

and the last angle is given as 68

Step-by-step explanation:

Hope this helps! Pls give brainliest!

The ending balance in Richard’s checkbook register is $1,009.81

In starting the amount of Richard has in his account is $900.00

All the amount of money which will be credited or deposit in the account that means the money is added in the account .

Al the amount of money that will be debited or payment from the account will be subtracted from the account .

Credited or deposit = $390.36 + $390.36 + $390.36 + $390.36

Debited or payment = $455.00 + $125.40 + $155.44 + $455.00 + $9.20 + $251.59

Total amount of money left = Base money + credited money - debited money

Total amount of money left  = 900 + 1561.44 - 1451.63

Total amount of money left = $1,009.81

To know more about balance click here :

https://brainly.com/question/27154367

#SPJ4

The given question is incomplete the complete question is :

Richard’s checkbook register as of 02/19: Check # Date Description of Transaction Payment/Debit (-) Fee (-) Deposit/Credit (+) Balance 02/03 Deposit $900.00 $900.00 02/05 Deposit - Paycheck $390.36 $1,290.36 201 02/05 Blue Sky Apartments $455.00 $835.36 202 02/07 Renter’s Insurance $125.40 $709.96 203 02/18 Online Clothing Purchase $155.44 $554.52 02/19 Deposit - Paycheck $390.36 $944.88 Enter the following transactions into Richard’s checkbook register and state his ending balance: Date Type Description Amount 03/01 Check #204 Blue Sky Apartments $455.00 03/05 DEP Payroll automatic deposit $390.36 03/08 Debit Benny’s Hamburgers and Fries $9.20 03/15 Check #205 Car payment $251.59 03/19 DEP Payroll automatic deposit $390.36 a. $715.79 b. $1,009.81 c. $780.72 d. $880.24