The number of isomers of Heptane and sketch/draw all the structures is 9 isomers.
Isomers are molecules or polyatomic ions with identical molecular formulae that are, identical variety of atoms of every detail however awesome preparations of atoms in space. Isomerism is the existence or opportunity of isomers. Isomers no longer always share similar chemical or bodily residences.
One in all two or more compounds that have equal chemical components however extraordinary arrangements of the atoms within the molecules and that can have exclusive physical/chemical homes.
Structural isomers are the one's isomers wherein the atoms are absolutely organized in a distinct order with equal molecular formulation. those are the molecules having the identical form of molecular system with distinct connectivities relying upon the order they may be prepared.
Learn more about isomers here:-https://brainly.com/question/2705480
#SPJ1
what is wrong with the notation 1s22s22p63s23p63d104s24p2 for germanium (atomic number 32)? why should the 4s subshell be filled before the 3d ?
The 4s orbital in the electronic configuration of a germanium should be filled first before 3d orbital because 4s orbital has a less energy than 3d orbital.
The electronic configuration of element is written in the order which is given in the attached image. The order of filling electron is given by Madelung rule in which electrons tries to achieve the order which fills the energy sublevels of atoms. According to the Aufbau principle, electrons occupy the lowest energy sublevel.
In other words, the orbital with a smaller value of n+l will be filled first. The n and l value for 4s orbital is 4 and 0 respectively. The n and l value for 3d orbital is 3 and 2. Hence, their n+l value will be
4s=(4+0)=4
3d=(3+2)=5
Hence, the electronic configuration of germanium should be written as 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰.
Therefore, 4s orbital in the electronic configuration of a germanium should be filled first before 3d orbital because 4s orbital has a less energy than 3d orbital.
To know more about electronic configuration
https://brainly.com/question/7466098
#SPJ1
describe, without doing any calculations, how a graphical method can be used to obtain the activation energy for this reaction.
The slope of the graphical method can be used to obtain the activation energy.
As we know that rate constant (K) and the activation energy (Ea) relate to each other as;
lnK = ln A - Ea / RT
By using the values from the slope between 1/T and K, the activation energy of any reaction can be calculated
Hence
Slope = -Ea / R
Ea is the activation energy, the minus sign indicates that energy will b absorbed by the system
R is the rate constant, and the value of R is 8.314 J/mol.K
So it is clear that we can get the activation energy by using the slope of the graphical data.
You can also learn about activation energy from the following question:
https://brainly.com/question/28384644
#SPJ4
calculate the mass of gold that occupies the same volume as 62.9 g of cobalt. the density of cobalt is 8.90 g/ml and the density of gold is 19.3 g/ml
By using the formula of a density, the mass of a gold that occupies the same volume as 62.9 g of cobalt is
The density of a substance is calculated using the formula
density=mass/volume
By using density and mass, find out the volume in cobalt and use the same volume to find mass of gold. Rearrange the formula of density for volume
volume=mass/density
Plug values of cobalt in the formula
volume = (62.9 g×ml/8.90 g)
volume = 7.0674 ml
Now rearrange the formula of density for mass to calculate the mass of a gold
mass=density×volume
Plug values of gold in the formula
mass = 7.0674 ml×(19.3 g/ml)
mass = 136.40 g≈136 g
Therefore, the mass of gold occupies the same volume is 136 g.
To know more about the density of a substance
https://brainly.com/question/28614483
#SPJ4
a mixture of sand and sodium chloride is found to be 48 percent sodium chloride by mass. how many moles of sodium chloride are in 74 g of this mixture?
0.6078 moles of sodium chloride are in 74 gm of the mixture.
Mixture of sand and Nacl = 74gm
48% by mass is Nacl
48% = mass of Nacl / Total mass of mixture
48% = mass of Nacl / 74gm
Mass of Nacl = 48% of 74gm
Mass of Nacl = 48/100*74gm
Mass of Nacl = 35.52gm
Actual mass of Nacl = 58.44 gm
SO, the molar mass of Nacl = 35.52 / 58.44
= 0.6078 moles
The molar mass of the chemical compound is defined as the mass of the sample of that compound divided by the amount of substance which is the number of moles in that sample.
To know more about molar mass click here:
https://brainly.com/question/12127540
]
#SPJ4
dentify the compound with covalent bonding. identify the compound with covalent bonding. libr lii ne na2s h2se
The compound with covalent bonding is : LiI
1) LiBr : lithium bromide is an ionic compound. Lithium is the metal element which have tendency to donate the electron. the bromine is the non metal and have tendency to accept the electron. the compounds form ionic compound
2) LiI : lithium iodide is a covalent compound. the electronegatively difference is very low so they form covalent compound.
3) Na₂S : odium slfide is ionic compound. the electronegativity difference is very high so they form ionic bond
4) H₂Se: this is also an ionic compound.
Thus, The compound with covalent compound is : LiI
https://brainly.com/question/10777799
#SPJ4
What is the estimated effective nuclear charge, zeff, experienced by an electron in a 3p orbital of a chlorine atom?.
The estimated effective nuclear charge, Zeff, experienced by an electron in a 3p orbital of a chlorine atom is 6.1.
The effective nuclear charge is the charge experienced by the outermost valence electrons of an atom. the effective nuclear charge is given as :
Zeff = Z - s
where,
Z is the actual nuclear charge
s is the screening costant
The electronic configuration for the chlorine atom is :
₁₇Cl = (1s²) (2s² 2p⁶) (3s² 3p⁵)
The formula for calculating screening constant of 3p electron is :
s = ( 0.35 ( number of electrons in n ) + 0.85 ( electron in (n-1 ) ) + 1 ( electrons in ( n-2 )
s = 0.35 (6) + 0.85 ( 8 ) + 1 ( 2 )
s = 10.9
Zeff = Z - s
Zeff = 17 - 10.9
Zeff = 6.1
Thus, The estimated effective nuclear charge, Zeff, experienced by an electron in a 3p orbital of a chlorine atom is 6.1.
To know more about nuclear charge here
https://brainly.com/question/13664060
#SPJ4
a gas mixture contains 84 % nitrogen and 16 % oxygen. if the total pressure is 1.19 atm , what are the partial pressures of each component?
If the total pressure is 1.19 atm than partial pressure of N2 is 0.99 atm and O2 is 0.19 atm.
Define partial pressure.An idea is the partial pressure of a gas (rather than something we can measure). We consider the pressure of each gas in a mixture to be a component of the combination's overall pressure. Each gas has a certain pressure when contained by itself.
Given,
A gaseous mixture which contains 84% of N₂ and
16% of O₂
The total partial pressure Ptotal = 1.19atm
Ptotal = P N₂ + P O₂
% of various component of the mixture, we know the fractional composition of each components:
Partial pressure of component = Fractional composition of component × Total pressure
Partial pressure of component = [tex]\frac{percentage composition}{100}[/tex] × Total pressure
Partial pressure of component of N2 = 84/100 × 1.19 = 0.99 atm
Partial pressure of component of O2 = 16/100 × 1.19 = 0.19 atm
Thus,
partial pressure of N2 is 0.99 atm and O2 is 0.19 atm.
To know more about partial pressure, visit:
https://brainly.com/question/13199169
#SPJ4
the combustion of liquid octane, c8h18, in the presence of gaseous oxygen yields carbon dioxide and liquid water.what are the reactants in the reaction described
Any hydrocarbon may be completely burned to produce carbon dioxide and water.
What byproducts are produced during octane combustion?Octane, or C8H18, is a component of the fuel that powers your automobile. Octane burns to produce CO2 and water when it is burnt. The availability of oxygen is the primary component in the process. In an oxygen-free environment, combustion is impossible.
2 water molecules to 2 carbon dioxide molecules make up the molar ratio. For every mole of water in the molecule H2O, there are two moles of hydrogen atoms.
Carbon monoxide (CO) and water are byproducts of the incomplete combustion of octane, C8H18.
Carbon dioxide and water are the byproducts of a complete combustion process of any fuel.
learn more about Octane refer
https://brainly.com/question/29363532
#SPJ4
which combination of ionic charge and ionic radius give the largest lattice enthalpy for an ionic compound?
Combination of ionic charge and ionic radius give the largest lattice enthalpy for an ionic compound are:
Ionic charge = high, Ionic Radius = small
Understanding Ionic bondsUnderstanding Ionic bonds Ionic bonds occur due to the handover of electrons to form positive ions and negative ions whose electron configuration is the same as that of the noble gases. Positive ions and negative ions are bound by an electrostatic force. The resulting compounds are called ionic compounds. One example that we often encounter everyday is table salt.
Well, the chemical formula for table salt is NaCl (Sodium chloride). In solid NaCl there is a bond between Na⁺ ions and Cl⁻ ions by electrostatic forces, so it is called an ionic bond. The crystal form of NaCl is a series of Na⁺ ions and Cl⁻ ions. One Na⁺ ion is surrounded by six Cl⁻ ions and one Cl⁻ ion is surrounded by six Na⁺ ions .
Formation of Ionic bondEach element must try to have an electron configuration like that of a noble gas, either by releasing electrons or accepting electrons, so that it is stable. This electron handover event occurs in the NaCl compound/ table salt.
Na belongs to group IA where IA has 1 valence electron, so that to be stable IA must release 1 electron. If you look at the electron configuration, 11Na: 2, 8, 1. So when removing 1 electron, the last electron becomes 8 (according to the octet rule). Due to removing 1 electron, the originally neutral Na becomes charged +1 (Na⁺).
The reaction:
Na → Na⁺ + e⁻ (meaning Na loses 1 electron, see the electron is to the left of the arrow)
Learn more about ionic bonds at https://brainly.com/question/11527546.
#SPJ4
how much heavier is a magnesium atom than helium atom
Answer:
6
Explanation:
Magnesium=24
helium= 4
24:4=6
A student is studying barium, a highly reactive element that is used in some paints. Which characteristic of barium is most closely related to its chemical reactivity?.
High ionization energy is the property of barium that is most directly connected to its chemical reactivity.
Has barium a high level of reactivity?Each of their atoms contains two valence (outermost) electrons. Barium has valence electrons in its fifth shell because it is in period 5, or row 5, however it can lose its valence electrons very quickly.
This explains why oxygen and other electronegative substances, like barium, make it so reactive. In a nutshell, when atom size increases, the ionization energy drops.
Barium is larger and has higher energy levels than strontium because it is in a different period—the sixth—than strontium, which is in a different period. As a result, barium will have a lower ionization energy.
To know more about ionization energy visit:
https://brainly.com/question/29355187
#SPJ4
Jack is trying out a new skateboard that he got for his birthday. He puts one foot on the skateboard and the other foot on the ramp. He notices that when he pushes off of the ramp with his foot, his body and the skateboard move forward up the ramp. He wants to investigate this phenomenon to answer the question: What causes this motion? He determines that he needs to figure out which force pair is involved with the motion he experiences.
Which of the following equal and opposite force pairs can help to explain the motion of Jack and his skateboard up the ramp?
A
The foot exerts a force on the ramp and the ramp exerts a force on the ground.
B
The foot exerts a force on the ramp and the ramp exerts a force on the foot.
C
The skateboard exerts a force on the ramp and the ramp exerts a force on the foot.
D
The skateboard exerts a force on the foot and the foot exerts a force on the ramp.
Answer:
the answer is D
Explanation: i took the test and it was correct
Calcium carbonate can be broken down by heating. What is the scientific term for this?.
The term is called Thermal Decomposition. Calcium Carbonate is strongly heated until it undergoes thermal decomposition to form calcium oxide and carbon dioxide. The calcium oxide (unslaked lime) is dissolved in water to form calcium). Bubbling carbon dioxide through these forms a milky suspension of calcium carbonate.
Thermal decomposition is a chemical reaction where heat is a reactant. Since heat is a reactant, theses reactions are endothermic meaning that the reaction requires thermal energy to break the chemical bonds in the molecule.
A common example of thermal decomposition reaction is calcium carbonate decomposes into calcium oxide and carbon dioxide. This process is employed in the manufacturing of quick lime, which is an important substance in many industries.
Learn more about thermal decomposition here https://brainly.com/question/465533
#SPJ4
what will settle out if allowed to sit on a table
a suspension
a colloid
a solution
a compound
Suspension will settle out if allowed to sit on a table
In suspension the solute does not dissolve in liquid and when placed on table for sometime and it will settle down at the bottom of the beaker and we can separate particles of solute easily from solvent through filtration and the colloid particles of solute does not dissolve in liquid neither it is settle down and it float through the solvent and in solution the particles of solute dissolve in to the solvent and we cannot identify them as separate we cannot separate them by filtration and in compound the two element combine to form a new thing and resultant compound have two new or different properties other than its ingredients so the correct answer is suspension
Know more about suspension
https://brainly.com/question/9508789
#SPJ9
Write the balanced neutralization reaction that occurs between h2so4 and koh in aqueous solution.
The balanced neutralization reaction that occurs between H2SO4 and KOH in aqueous solution is;
H2SO4 (aq) + 2KOH (aq) --> 2H2O (l) + K2SO4 (aq)
Neutralization reaction
We refer to this kind of reaction, in which an acid and a base combine to produce water and salt, as a neutralization reaction. In this instance, our base is potassium hydroxide (KOH), and our acid is sulfuric acid (H2SO4) (KOH).
Acid and base leads to water and salt.
Double-replacement reaction
The H+ from the H2SO4 will attach to the OH- from the KOH in this double replacement reaction, resulting in the formation of H2O. (water). Similar to this, K+ will bind to SO42- to form K2SO4 salt.
For example, sodium hydroxide (NaOH) and hydrochloric acid (HCl) can be combined to create a salt, sodium chloride (NaCl), and water (H2O). NaOH + HCl → NaCl + H2O is the chemical formula for the neutralization reaction.
To know more about balanced reaction, visit:
https://brainly.com/question/14258973
#SPJ4
what type of indicator would you use to determine the ph of an opaque (non-clear, cloudy) substance?
Specifically we can use red and blue litmus paper, phenolphthalein, and bromothymol blue , to determine the ph of an opaque (non-clear, cloudy) substance?
What is pH ?
pH, a quantitative measure of the acidity or basicity of aqueous or other liquid solutions. Widely used in chemistry, biology, and agriculture, this term translates the concentration value of hydrogen ions (usually in the range of about 1 to 10-14 gram-equivalents per liter) into a number between 0 and 14. increase. At neutral (neither acidic nor alkaline), the concentration of hydrogen ions is 10−7 gram equivalents per liter, which corresponds to a pH of 7. Solutions below pH 7 are considered acidic. Solutions with a pH greater than 7 are considered basic or alkaline.
To learn more about pH ,click the link given ;
https://brainly.com/question/172153
#SPJ4
what happens when the molecule-to-molecule attractions in the solute are comparable to those in the solvent?
The solute can have infinite solubility in the solvent when the molecule-to-molecule attractions in the solute are comparable to those in the solvent. The correct option to this question is B
On the basis of the concept, solute has a lower tendency to dissolve in water the stronger the interactions between the solute particles. Likewise, there is a greater chance that solubility will rise the stronger the interactions between the molecules of the solute and the solvent.
Water molecules cluster together as a result of stronger water hydrogen bonds, making them unavailable for biomolecular hydration. If the hydrogen bonds between the proteins significantly strengthen or weaken, the extended denatured forms of the proteins typically become more soluble in water.
For more information on solubility kindly visit to
https://brainly.com/question/29589228
#SPJ4
Complete question:
What happens when the molecule-to-molecule attractions in the solute are comparable to those in the solvent?
A) The solute does not dissolve in the solvent.
B) The solute can have infinite solubility in the solvent.
C) The material has only limited solubility in the solvent.
D) The solution will become saturated.
give the iupac name for this molecule. this molecule has the condensed formula c h 3 c h 2 c h (c h 3) c h 2 c h 2 c h o.
The IUPAC name for this molecule will be 4-methyl hexaldehyde.
An worldwide federation of National Adhering Organizations seeking to improve the chemical sciences, particularly by creating nomenclature and vocabulary, is the International Union of Pure and Applied Chemistry. The International Science Council counts it among its members.
Whether in a continuous chain or a ring, the longest chain of carbons joined by a single bond serves as the basis for IUPAC nomenclature. According to a particular set of priorities, all deviations, whether multiple bonds or atoms other than carbon and hydrogen, are denoted by prefixes or suffixes.
For this molecule we know that if aldehyde group is present then the numbering will start from there and one methyl group is present on 4th carbon thus the IUPAC name will be 4-methyl hexaldehyde.
To know more about IUPAC visit the link:
https://brainly.com/question/16631447?referrer=searchResults
#SPJ4
Predict the products of the double replacement reactions given. check to see that the equations are balanced. agno3 nacl → ? agna clno3 nano3 agcl (s) 2nano3 3agcl (s) ag nano3
After a double displacement reaction, the balanced equation and products are [tex]AgNO_{3}[/tex] (aq) + NaCl(aq) >>> AgCl(s)+ [tex]NaNO_{3}[/tex](aq).
In the equation of [tex]AgNO_{3}[/tex] with NaCl silver displaces the sodium from Nacl and forms AgCl while Na reacts with [tex]NO_{3}[/tex] and forms [tex]NaNO_{3}[/tex]. This is an example of double displacement and precipitation reaction.
In an aqueous solution, a double-displacement reaction takes place when the positive and negative ions of two ionic compounds exchange positions to create two completely different compounds. These substances may manifest as precipitates, gases, or molecular substances.
The following equation describes the general form of a double-displacement reaction: AD + BC = AB + CD
There are two types of double displacement reaction: precipitation and neutralization.
For more information on double displacement reaction kindly visit to
https://brainly.com/question/20927858
#SPJ4
Perform the following mathematical operation, and report the answer to the correct number of significant figures. 0.97584 ÷ 5.68 = [?]
Answer: 0.172
Explanation:
from what maximum height could a 62 kg person jump and land rigidly upright on both feet without breaking their legs? assume that all energy is absorbed by the leg bones in a rigid landing.
A person weighing around 62 kg can jump from a height of 0.329 metres without breaking their legs.
Potential energy present in a jumper from height h. = m g h
which, when the individual strikes the ground, entirely transforms into kinetic energy. Now, the human can only absorb a maximum of 200 J of energy.
m = 62 kg
g = 9.8 m/s²
⇒ m g h = 200 J
⇒ h = 200 J / (62 kg × 9.8 m/s²) = 0.329 m
Therefore, a person can only fall from a height of 0.30 m safely and without breaking both of their legs.
To learn more about energy visit:
https://brainly.com/question/1932868
#SPJ4
if you have 172 grams of chromium (IIl) carbonate, how many moles do you have? About how many molecules do you have?
The moles in 172 grams of Chromium (IIl) carbonate is 0,6056 moles and there is 3.647x [tex]10^{23}[/tex] molecules.
The moles can be calculated as follows:
The first you should calculate the molar mass
Chromium (IIl) carbonate is Cr2(CO)3
Mass of Chromium = 51.9961 g/mol
Mass of Carbon = 12.0107 g/mol
Mass of Oxygen = 15.9994 g/mol
mass molar = (51.9961 g/mol x2)+(12.0107 g/mol x 3) +(15.9994 g/mol x9) = 284.0189 g/mol
The next step is calculate the moles
Divide the mass of chromium(III) carbonate by its molar mass to get moles
[tex]\frac{172 grams}{284.0189g/mol}[/tex] [tex]\\[/tex]
= 0.6056 moles
The next step is calculate the molecules
time the moles of chromium(III) carbonate by Avogadro's number
molecules= moles x Avogadro's number
molecules = 0.6056 moles x 6.02214076 × [tex]10^{23}[/tex][tex]mol^{-1}[/tex].
molecules= 3.6470 molecules
Learn more on moles and molecules here
https://brainly.com/question/27966116
#SPJ1
What would happen to the energy of the σ1s mo if the h atoms in h2 were pulled apart to a distance twice as long as its normal bond length?.
Energy of the σ1s MO if the h atoms in H₂ were pulled apart to a distance twice as long as its normal bond length then the energy would increase and radius would decreases
If coulomb force is positive and negative then in the hydrogen atom nucleus is positive charge and electron is localized in its 1st orbit and coulombs are said to f final = 2f and if the force increases the energy level increases and the electron and the positive charge are both in the opposite nature so the orbit would be shrinking toward the nucleus so that's why the radius would decreases
Know more about energy
https://brainly.com/question/23742233
#SPJ4
calculate the formula mass of each compound. keep at least one decimal place in atomic masses from the periodic table.
The formula mass of each compound. keep at least one decimal place in atomic masses from the periodic table are H₂O₂ = 34.014 g /mol and H₂SO₄ = 98.07 g/mol.
The formula mass is defined as the sum of atomic masses of each element in the formula. let us take some example:
1) H₂O₂
mass of hydrogen = 1
mass of oxygen = 15.99
H₂O₂ = ( 2× 1 + 2 × 15.99) = 34.014 g /mol
2) H₂SO₄
mass of hydrogen = 1
mass of sulfur = 32.06 g/mol
H₂SO₄ = ( 2× 1 + 32.06 + 2 + 4 × 15.99) = 98.07 g/mol
Thus, The formula mass of each compound. keep at least one decimal place in atomic masses from the periodic table are H₂O₂ = 34.014 g /mol and H₂SO₄ = 98.07 g/mol.
To learn more about formula mass here
https://brainly.com/question/1363167
#SPJ4
in a double replacement reaction, the anion of one reactant must be combined with the of the other reactant.
Opposing ions join in a double displacement reaction, also known as a double replacement reaction. This implies that the cation of one chemical will join with the anion of another molecule and form a bond, and vice versa.
What is a displacement reaction, exactly?A displacement reaction is a kind of reaction where a portion of one reactor is replaced by another. A displacement reaction is also sometimes called a substitution reaction or a metathesis reaction.
What causes a displacement response to happen?When one element replaces another in a compound, it causes a single displacement reaction. Neither metal nor a nonmetal may be used as a substitute for another metal. Only a more reactive component of the chemical it reacts with can take the place of the other component.
Give an example of double displacement.A precipitation reaction occurs between two aqueous ionic compounds to create a new, insoluble ionic compound. Here is an illustration of a reaction between lead (II) nitrate and potassium iodide that produces (soluble) potassium nitrate and (insoluble) lead iodide.
Learn more about displacement reaction here:-
https://brainly.com/question/11604204
#SPJ4
What volume of water would you add to 15. 0 ml of 12 m hcl to make it to 6. 0 m solution?.
According to molar concentration, 30 ml of water should be added to 15 ml of 12 M HCl to make it to 6 M solution.
What is molar concentration?
Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.
The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.
In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.
In the given example,volume required is calculated as, V₂=M₁V₁/M₂
V₂=12×15/6
V₂=30 ml.
Thus, 30 ml of water is added to 15 ml of 12 M HCl to make it to 6 M solution.
Learn more about molar concentration,here:
https://brainly.com/question/21841645
#SPJ1
Besides nylon, what other product is formed from the reaction of adipoyl chloride and 1,6-diaminohexane?.
Besides nylon, HCl is formed from the reaction of adipoyl chloride and 1,6- diaminohexane , but HCl is the byproduct molecule.
What is formed when adipoyl chloride and 1,6-diaminohexane reacts with each other and what are the by products?Adipoyl chloride is the monomer and hexamethylinediamine is also the monomer which reacts together to form polymer.The polymer formed is named nylon6,6 which is a co polymer and nylon 6,6 find its use in various other activities of life.Nylon6,6 is a copolymer since the participation of two monomers , and not a single monomer undergoing decomposition.Nylon6,6 is formed with an elimination of small molecule of HCl which is considered to be a by product .It is formed by a condensation reaction and hence HCl is the product formed from the reaction of adipoyl chloride and 1,6- diaminohexane.To know more about nylon visit:
https://brainly.com/question/10278626
#SPJ4
What is the name symbol and charge of an ion that contains 15 protons and 18 electrons.
P3 is the symbol for the ion, which consists of 15 protons and 18 electrons.
To start, let's define what an ion is.An atom or a collection of atoms with a charge is an ion. Depending on the process through which the ion is created, the charge might be either positive (+) or negative (-).
1. If the element loses an electron, the ion will be positive (s)
2. If the element involved gained an electron, the ion will be negative (s).
We'll start by locating the element's symbol in order to answer the above-mentioned question. This is attainable as follows:
We learned that the ion had 15 protons from the question that was previously presented. The element's atomic number is this, or 15 protons.
Comparing the atomic sizes now The element whose ion we are searching for is phosphorus, which has the periodic table's corresponding number .
The ion's charge will then be determined. This is attainable as follows:
Electron = 18 Proton = 15
Price =?
Proton - electron equals charge.
Cost: 15 to 18
-3 charge
We will finally determine the ion's symbol. Below is an example to help:
Charge = -3 Proton = 15 Electron = 18
Phosphorus is an element.
P is the element's symbol.
Ion symbol is hence P3.
Consequently, the ion with 15 protons and 18 electrons has the symbol P3.
To know more about symbol of element visit:-
https://brainly.com/question/14678810
#SPJ4
what should the charge of a sulfide ion (s2- )be in order for it to have the same electron configuration as that of neutral phosphorus in the ground state?
The +1 charged sulfide ion has the same electron configuration as neutral phosphorus in the ground state. In formula S, sulfur dioxide is the inorganic anion of sulfur.
Below is the electron configuration of ground-state neutral phosphorus with atomic number 15.
Phosphorus-15: 1s, 2s, 2p, 6, 3s, 2p
The electron configuration of sulfur at atomic number 16 follows again.
S-16: 1s, 2s, 2p, 6, 3s, 2p, 4.
A sulfide ion has a negative charge because it contains more electrons than normal. Due to more electrons than protons, an anion has a negative charge in it. Sulfate is an anion because its overall charge is negative. any atom or group of atoms that bears one or more positive or negative electrical charges. Positively charged ions are called cations negatively charged ions are anions.
Learn more about A sulfide ion here:-https://brainly.com/question/28896902
#SPJ4
if a sample of chloroform is initially 25 degrees celsius what is the final temperature if 150.0g of chloroform absorbs 1.0 kilojoules of heat, and the specific heat of chloroform is 0.96 J/g degrees celsius
Taking into account the definition of sensible heat, the final temperature if 150.0g of chloroform absorbs 1.0 kilojoules of heat is 31.94 C.
Definition of sensible heatWhen heat added or removed from a substance causes a temperature change in it without affecting its physical state (phase change), it is called sensible heat.
The expression that allows to calculate heat exchanges is:
Q = c× m× ΔT
where:
Q is the heat exchanged by a body of mass m.c is the specific heat substance.ΔT is the temperature variation.Specific heat of the substanceFinal temperatureIn this case, you know:
Q= 1 kJ= 1000 Jc= 0.96 J/gCm= 150 gΔT= Tfinal - Tinitial= Tfinal - 25 CReplacing in the definition of sensible heat:
1000 J = 0.96 J/gC× 150 g× (Tfinal - 25 C)
Solving:
1000 J = 144 J/C× (Tfinal - 25 C)
1000 J÷ 144 J/C= Tfinal - 25 C
6.94 C= Tfinal - 25 C
6.94 C + 25 C= Tfinal
31.94 C= Tfinal
Finally, the final temperature is 31.94 C.
Learn more about sensible heat:
brainly.com/question/12670283
#SPJ1
