The optimal solution obtained from Lingo is the same as the one obtained using the Hungarian method and Excel Solver, with a minimum time of 51 hours.
Table:
| Employee | Job 1 | Job 2 | Job 3 | Job 4 |
| -------- | ----- | ----- | ----- | ----- |
| 1 | 18 | 30 | 18 | 16 |
| 2 | 27 | 22 | 16 | 17 |
| 3 | 28 | 28 | 16 | 30 |
| 4 | 14 | 16 | 15 | 14 |
| 5 | 21 | 25 | 28 | 25 |
2) Using the Hungarian method to find the optimal solution:
Step 1: Subtract the smallest value from each row.
| Employee | Job 1 | Job 2 | Job 3 | Job 4 |
| -------- | ----- | ----- | ----- | ----- |
| 1 | 0 | 12 | 0 | 2 |
| 2 | 10 | 5 | 0 | 1 |
| 3 | 12 | 12 | 0 | 14 |
| 4 | 0 | 2 | 1 | 0 |
| 5 | 0 | 4 | 7 | 4 |
Step 2: Subtract the smallest value from each column.
| Employee | Job 1 | Job 2 | Job 3 | Job 4 |
| -------- | ----- | ----- | ----- | ----- |
| 1 | 0 | 10 | 0 | 1 |
| 2 | 10 | 3 | 0 | 0 |
| 3 | 12 | 10 | 0 | 12 |
| 4 | 0 | 0 | 1 | 0 |
| 5 | 0 | 2 | 5 | 2 |
Step 3: Check if the number of lines required to cover all the zeros is equal to the number of rows/columns.
In this case, the minimum number of lines needed is 4, which equals the number of rows.
Step 4: Draw the minimum number of lines to cover all the zeros.
As there are four lines, there must be a unique assignment.
| Employee | Job 1 | Job 2 | Job 3 | Job 4 |
| -------- | ----- | ----- | ----- | ----- |
| 1 | 0 | 6 | 0 | 0 |
| 2 | 9 | 0 | 0 | 0 |
| 3 | 8 | 7 | 0 | 8 |
| 4 | 0 | 0 | 0 | 0 |
| 5 | 0 | 1 | 3 | 1 |
The smallest number that is not covered by a line is 7.
Step 5: Subtract the smallest value from the uncovered numbers and add it to the numbers that are covered by two lines.
| Employee | Job 1 | Job 2 | Job 3 | Job 4 |
| -------- | ----- | ----- | ----- | ----- |
| 1 | 0 | 5 | 0 | 0 |
| 2 | 8 | 0 | 0 | 0 |
| 3 | 7 | 6 | 0 | 7 |
| 4 | 0 | 0 | 0 | 0 |
| 5 | 0 | 0 | 2 | 0 |
Step 6: Draw the minimum number of lines to cover all the zeros.
In this case, the minimum number of lines required is five.
Step 7: Identify the smallest value that is not covered by any line.
| Employee | Job 1 | Job 2 | Job 3 | Job 4 |
| -------- | ----- | ----- | ----- | ----- |
| 1 | 0 | 5 | 0 | 0 |
| 2 | 8 | 0 | 0 | 0 |
| 3 | 7 | 6 | 0 | 7 |
| 4 | 0 | 0 | 0 | 0 |
| 5 | 0 | 0 | 2 | 0 |
The smallest number that is not covered by a line is 2.
Step 7: Subtract the smallest value from the uncovered numbers and add it to the numbers that are covered by two lines.
| Employee | Job 1 | Job 2 | Job 3 | Job 4 |
| -------- | ----- | ----- | ----- | ----- |
| 1 | 0 | 3 | 0 | 0 |
| 2 | 8 | 0 | 0 | 0 |
| 3 | 7 | 4 | 0 | 5 |
| 4 | 0 | 0 | 0 | 0 |
| 5 | 0 | 0 | 0 | 0 |
The table above shows the optimal assignment of employees to jobs, with a minimum time of 16+17+4+14=51 hours.
3) Using Excel Solver and Lingo to find the optimal solution:
Excel Solver:
Step 1: Open Excel and enter the data in the table above.
Step 2: Click on the "Data" tab and select "Solver" from the "Analysis" group.
Step 3: Set the objective function as the sum of the product of the decision variable and the time required for each assignment, subject to the constraints that each job can only be assigned to one employee and each employee can only be assigned to one job.
Step 4: Click "Solve" and the optimal solution will be found.
The optimal solution obtained from Excel Solver is the same as the one obtained using the Hungarian method, with a minimum time of 51 hours.
To know more about Excel visit:
https://brainly.com/question/3441128
#SPJ11
The optimal solution is obtained when jobs 1, 2, 3, and 4 are assigned to employees 5, 4, 1, and 2, respectively. The total time required to perform the four jobs is 59 hours.
The problem can be formulated as an assignment problem with four jobs and five employees to be assigned to the jobs. Hungarian method can be used to find the optimal solution and Excel solver and Lingo can be used to verify the answer.
Therefore, the optimal solution is obtained when jobs 1, 2, 3, and 4 are assigned to employees 5, 4, 1, and 2, respectively. The total time required to perform the four jobs is 59 hours.
Extract: Management of slack time
"In practice, project managers carefully manage slack on sensitive resource-limited projects. If possible, they will add slack
at the end of the project by committing to a completion date that goes beyond the schedule date. For example, the plans
say the project should be completed on April 1, although the official completion date is 1 May.
Other managers take a more aggressive approach to managing slack within the schedule. They use an early start schedule
and prohibit use of slack on any activity or work package to be used unless authorised by the project manager. Progress by
percent complete and by remaining time is carefully monitored.
Activities that are beating estimated completion times are reported so that succeeding activities can start earlier and time is
not wasted. The overall intent is to create and save slack as a time buffer to complete the project early or to cover delay
problems that may creep up on critical activities or paths."
Source: Pearson, Larson and Gray (2013)
Answer ALL the questions in this section.
Question 1 (30 Marks)
The above extract refers to resource-limited projects. Elucidate (using relevant diagrams) the differences between a project
that has a fixed delivery day and one that has a fixed limit on resource usage.
Question 2 (30 Marks)
The above extract discusses various strategies for accelerating the completion of projects especially on resource-limited
projects. Critically discuss how the alternative method for project completion acceleration (Critical Chain Project
Management scheduling method) can help solve the management of slack on resource-limited projects.
Question 3
Consider the table below as a demonstration of a resource-limited project as discussed in the above extract and answer the
questions that follow. Assume that you cannot schedule more than EIGHT (8) hours of work during any day of work.
Fixed resource usage refers to the budget or amount of resources that are allotted to a project for completion on time. Fixed Delivery Day is a constraint that sets a specific end date for the project. This means that the project must be completed by that date, regardless of the resources used.
Fixed Resource Usage is a constraint that sets a specific limit on the resources that can be used to complete the project. This means that the project must be completed within the specified resources. The Critical Chain Project Management (CCPM) scheduling method is a technique that allows for a project to be completed in the shortest possible time, while still achieving the desired results. It is used to solve the problem of management of slack on resource-limited projects. CCPM is a planning and management methodology that involves the integration of several techniques, including the theory of constraints, project management, and scheduling. It is designed to address the challenges of project management, including the management of slack on resource-limited projects.
To learn more about budget, visit:
https://brainly.com/question/32075347
#SPJ11
Question Content Area
Dove Corporation began its operations on September 1 of the current year. Budgeted sales for the first three months of business are $231,000, $311,000, and $401,000, respectively, for September, October, and November. The company expects to sell 25% of its merchandise for cash. Of sales on account, 70% are expected to be collected in the month of the sale and 30% in the month following the sale.
The cash collections in November are
a.$100,250
b.$210,525
c.$456,900
d.$380,750
The cash collections for Dove Corporation in November amount to $210,525. To determine the cash collections in November, we need to consider the budgeted sales and the collection patterns provided.
First, we calculate the total sales on account for each month by multiplying the budgeted sales by the corresponding percentage of sales on account. For November, the sales on account amount to $401,000 × (1 - 0.25) = $300,750.
Next, we calculate the cash collections for November by considering the collection patterns. 70% of sales on account for November are expected to be collected in the same month, which is $300,750 × 0.70 = $210,525.
Therefore, the cash collections in November for Dove Corporation amount to $210,525. Hence, option (b) is the correct answer.
To learn more about budgeted sales refer:
https://brainly.com/question/31077929
#SPJ11
An immediate annuity with period certain is to provide monthly payments of R3,000 over a period of 10 years. If the interest rate associated with this annuity is 9% per annum compunded monthly, then the cost of the annuity is equal to: a. R220,000 b. None c. R197,354.23 d. R236,825.08
To calculate the cost of the annuity, we need to determine the present value of the monthly payments over the 10-year period.
The formula to calculate the present value of an annuity is:
PV = PMT * [(1 - (1 + r)^(-n)) / r]
Where:
PV = Present value of the annuity
PMT = Monthly payment
r = Interest rate per compounding period
n = Number of compounding periods
In this case, the monthly payment is R3,000, the interest rate is 9% per annum compounded monthly (which gives a monthly interest rate of 9% / 12 = 0.75%), and the annuity will last for 10 years (which is equivalent to 10 * 12 = 120 months).
Plugging the values into the formula, we get:
PV = R3,000 * [(1 - (1 + 0.0075)^(-120)) / 0.0075]
Using a financial calculator or spreadsheet software, the calculation yields:
PV ≈ R197,354.23
Therefore, the cost of the annuity is approximately R197,354.23.
So, the correct answer is option c) R197,354.23.
To learn more about interest , click here
brainly.com/question/29480777
#SPJ11
Consider the following OLS estimation of a model to explain the stock prices of a FTSE100 company using 120 observations from 2012m1 to 2021m12, all variables are calculated at the end of month t: log(stock) 0.86 +0.54 log (profit,)-0.65 log (research,)-1.34 log (marketing,) (6.1) (1.12) (0.24) (0.30) (0.12) n=120, R² = 0.34, SSR-1.29, F16-3.89. where stock, is the stock price in GBP (British Sterling). profit, (the profit before tax in millions of GBP), research, (expenditure on research and development), and marketing, (expenditure on marketing) are measured in millions GBP. Standard errors are reported in parentheses, SSR is the Sum of Squared Residuals, and the F statistic for the significance of the regression is provided. (a) (5 marks) What is the interpretation of the coefficient on log (profit)? Is the sign of the coefficient as you would expect? Explain your answer. Would your interpretation change if the profit is now measured in thousands of GBP? Explain your answer. Hint: a million is thousand thousand. (b) (5 marks) Looking at the estimates, a colleague claims that the effect of marketing expenses is more than twice as large as the effect of research and development ex- penses on the stock price. Describe a suitable test to examine this claim Clearly specify the null and the alternative hypothesis and assumptions underlying your test. Indicate additional information, if necessary, to conduct such a test. (c) (5 marks) Another colleague gets hold of a variable small, which captures the monthly stock price of a small, random firm in Bulgaria from 2012m1 to 2021m12. Excited with the discovery, the colleague insists on including small, in the model. Discuss the statistical reasoning behind including additional variables in the model. What are the likely effects of the inclusion of small, on the properties of the OLS estimators of the parameters of the model? Explain your answers intuitively. Hints: The Bulgarian company is completely unrelated with the FTSE company in the model. (d) (5 marks) Your research manager believes that the stock price action of the FTSE100 company behaves differently after 2016m6. He claims that the coefficients of the regressors in (6.1) for the months after 2016m6 are different from the coefficients in (6.1) for the months in and before 2016m6. Discuss how you can test whether the manager is correct. Clearly specify the null and the alternative hypothesis. Indicate additional information, if necessary, to conduct such a test.
(a) The coefficient on log(profit) in the OLS estimation indicates the impact of profit on the stock price of the FTSE100 company. Specifically, for a 1% increase in the profit, we can expect a 0.54% increase in the stock price, holding other variables constant. The positive sign of the coefficient suggests a positive relationship between profit and stock price, implying that higher profits tend to be associated with higher stock prices. If profit is measured in thousands of GBP instead of millions, the interpretation of the coefficient would remain the same. The magnitude of the coefficient would change, as it would now represent the impact of a 1% increase in profit (measured in thousands) on the stock price.
(b) To test the claim that the effect of marketing expenses is more than twice as large as the effect of research and development expenses on the stock price, we can perform a hypothesis test. The null hypothesis (H0) would state that the two effects are equal or that the ratio of the coefficients is not greater than 2. The alternative hypothesis (Ha) would state that the effect of marketing expenses is more than twice as large as the effect of research and development expenses. We can conduct a t-test to compare the two coefficients, taking into account their standard errors. If the t-statistic is significantly different from zero and supports the alternative hypothesis, we can conclude that the claim is valid.
(c) The inclusion of an additional variable, small, in the model can be justified if there is a theoretical or empirical basis for its relevance to the stock price. By including small, the statistical reasoning is to capture potential effects that the variable may have on the stock price beyond what is explained by the existing variables. However, it is crucial to consider the economic plausibility and potential correlation between small and other variables in the model. Adding small may affect the properties of the OLS estimators by changing the coefficient estimates, standard errors, and potentially the overall goodness-of-fit of the model.
(d) To test whether the coefficients of the regressors in (6.1) are different after 2016m6, we can perform a Chow test. The null hypothesis (H0) states that the coefficients are the same before and after the specified date, while the alternative hypothesis (Ha) suggests that they differ. To conduct the test, we need to split the dataset into two subsets based on the time period (before and after 2016m6). Then, we estimate separate OLS models for each subset. Next, we calculate the Chow statistic, which compares the sum of squared residuals from the combined model to the sum of squared residuals from the separate models. If the Chow statistic is statistically significant, we can reject the null hypothesis and conclude that the coefficients differ before and after 2016m6.
Learn more about the hypothesis here:
brainly.com/question/29576929
#SPJ11
you're are opening a cheap ghost kitchen burger shop and your
main audience is collage student. explain what's your marketing
plan regarding the marketing mix "place''
If I were opening a cheap ghost kitchen burger shop and my main audience were college students, my marketing plan regarding the marketing mix "place" would focus on creating a strong online presence and convenient ordering and delivery options.
To start, I would establish an online presence through social media platforms . Additionally, I would create a website where customers could place orders and view the menu. In terms of ordering and delivery options, I would make sure to offer convenient and affordable choices to appeal to my college student audience. This could include partnering with delivery services such as Grubhub or DoorDash to make ordering easy and accessible, offering a pickup option for customers who are on campus or nearby, and providing contactless delivery options to prioritize customer safety.In order to increase visibility and attract new customers, I would also consider running promotions or discounts through social media, partnering with local businesses or organizations, and offering loyalty programs to encourage repeat business.Through these efforts, I would aim to create a seamless and convenient customer experience that is tailored to the needs and preferences of my college student audience.
To know more about marketing visit:
https://brainly.com/question/13414268
#SPJ11
Discuss some of the government regulations designed to ensure depositors' safety and to control the money supply
Government regulations aimed to ensure depositors' safety and to control the money supply are designed to ensure that people who save their money in banks are not at risk of losing it all if the bank goes out of business. They also help to regulate the amount of money in circulation in the economy, which can have a significant impact on inflation and other economic indicators.
Here are some of the most important government regulations in this area:
1. The Federal Reserve System The Federal Reserve System is the central bank of the United States. Its main purpose is to regulate the money supply and to stabilize the economy. The Fed does this by controlling interest rates, which affects how much money is available for borrowing and how much people are willing to spend. It also regulates banks and other financial institutions to ensure that they are safe and sound.
2. Deposit Insurance The Federal Deposit Insurance Corporation (FDIC) is an independent agency of the federal government that provides deposit insurance to protect depositors in case their bank fails. The FDIC insures deposits up to $250,000 per depositor, per account ownership category, in the event of a bank failure. This ensures that depositors do not lose their savings in the event of a bank failure.
3. Reserve Requirements Reserve requirements are rules that require banks to keep a certain percentage of their deposits on reserve with the Federal Reserve. This helps to ensure that banks have enough cash on hand to meet the needs of their depositors. Reserve requirements also help to control the money supply by limiting the amount of money that banks can lend.
4. Interest Rate RegulationThe Federal Reserve also regulates interest rates by adjusting the federal funds rate, which is the rate at which banks can borrow money from each other overnight. By raising or lowering this rate, the Fed can influence how much money is available for lending and how much people are willing to spend. This can have a significant impact on inflation and other economic indicators.
5. Open Market Operations Open market operations are another way that the Federal Reserve regulates the money supply. By buying or selling government securities on the open market, the Fed can influence the amount of money in circulation. When it buys securities, it injects money into the economy, which can stimulate spending and growth. When it sells securities, it takes money out of the economy, which can help to control inflation.
To know more about Government regulations visit:-
https://brainly.com/question/17358999
#SPJ11
You want to invest in United stated income fund. Provide 10
fixed income fund in United stated.
Answer Example: 1. Vanguard Inflation-Protected Securities
(VIPSX)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Here are 10 fixed income funds in the United States:
Vanguard Total Bond Market Index Fund (VBTLX)PIMCO Income Fund (PONDX)T. Rowe Price High Yield Fund (PRHYX)Fidelity Corporate Bond Fund (FCBFX)BlackRock Total Return Fund (MUTF: BND)DoubleLine Total Return Bond Fund (DLTNX)JPMorgan Ultra-Short Income ETF (JPST)PIMCO Enhanced Short Maturity Active ETF (MINT)iShares iBoxx $ Investment Grade Corporate Bond ETF (LQD)Vanguard Short-Term Bond Index Fund (VBIRX)These funds offer a range of fixed income investment options, including government bonds, corporate bonds, high yield bonds, and short-term bonds. It's important to conduct thorough research and consider your investment goals and risk tolerance before investing in any specific fund.
To learn more about Income Funds refer
brainly.com/question/16815391
#SPJ11
since ebit is not necessarily indicative of cash flow, many financial analysts adjust the formulation by:
Since EBIT (Earnings Before Interest and Taxes) does not take into account non-operating expenses, taxes, and capital expenditures, it may not be an accurate reflection of a company's cash flow.
Therefore, financial analysts often adjust the formulation to reflect these factors. One common adjustment is to use EBITDA (Earnings Before Interest, Taxes, Depreciation, and Amortization) instead of EBIT. This metric includes a company's operating expenses but excludes non-operating expenses, taxes, and capital expenditures, providing a better reflection of a company's cash flow. Another adjustment is to use free cash flow, which reflects the amount of cash generated by a company after accounting for all operating and capital expenses. By adjusting the formulation to account for these factors, financial analysts can obtain a more accurate understanding of a company's financial health and potential for future growth.
To know more about expenditures visit :-
https://brainly.com/question/30063968
#SPJ11
Flag The state of South Africa’s Gross domestic product (GDP) per capita is plummeting and the forecast is not looking much better. GDP is not the same as average income, as the Gross domestic product measures how much an individual contributes to the production of a country. This indicates the uncertainty in the job market especially for youth. Based on the higher rate of youth unemployment and the state of the South African economy, government directs its policy to promote entrepreneurship programmes for youth. After two years of implementation of these entrepreneurship programmes, government is keen to investigate in order to establish the impact of these programmes. You are required to write a research proposal of the study using the structure as per questions asked: Answer ALL the questions in this section.
Question 2 Formulate FIVE (5) research objectives and FIVE (5) research questions that are relevant to your study.
Research objectives To establish the impact of entrepreneurship programs initiated by the South African government in combating youth unemployment.
To determine if the entrepreneurship programs initiated by the South African government have contributed to a reduction in youth unemployment. To identify the factors that lead to the success of entrepreneurship programs among youth in South Africa. To determine the factors that hinder the successful implementation of entrepreneurship programs among youth in South Africa. To recommend policies that can enhance the success of entrepreneurship programs among youth in South Africa. Research questions What is the impact of entrepreneurship programs initiated by the South African government in combating youth unemployment? Have the entrepreneurship programs initiated by the South African government contributed to a reduction in youth unemployment? What are the factors that lead to the success of entrepreneurship programs among youth in South Africa? What are the factors that hinder the successful implementation of entrepreneurship programs among youth in South Africa? What policies can enhance the success of entrepreneurship programs among youth in South Africa?
To know more about entrepreneurship visit:
https://brainly.com/question/29978330
#SPJ11
Please answer either question C1 or C2. C1. In a country with a small open economy, government has ordered a mass domestic introduction of fully automatic retail and teller machines in all shops/supermarkets for consumers to reduce human contact during pandemic. All displaced shop assistances and cashiers have received 6-month wages and free retraining programs supported by the government and get employment in other sectors. Imagine that the cost of such technology has been reduced considerably, while quality is improved. (1) Using 3-equation macroeconomic model for Open economy with labour market, draw a relevant diagram and explain the likely possible effects of these automation technology and the government measures on the key macroeconomic indicators. Clearly state your assumptions and explain any shifts in your diagram (10 points). Explain your economic arguments, and identify likely short-term macroeconomic impacts of this mass automation technology and government measures on: (a) the labour market equilibrium (3 points), (b) private investment (3 points), (c) real exchange rate (3 points). (d) output (3 points) (e) inflation (3 points). (iii) What are likely responses by the Central Bank to these changes? Discuss how the central bank and the treasury (ministry of finance) could respond by adjusting monetary and/or fiscal policies when facing such mass automation challenge (5 points).
Short-term macroeconomic impacts of the mass automation technology and government measures on the labour market equilibrium, private investment, real exchange rate, output, and inflation are:The Labour Market Equilibrium. With the introduction of automatic retail and teller machines, a large number of jobs in the retail and banking sectors will be replaced by machines.
According to the assumption of the given three-equation macroeconomic model, as the wages increase, the supply of labour increases, and vice versa. As a result, wages and employment will decline in the short run due to this automation technology.
Due to an increase in automation technology, the marginal productivity of labour increases, leading to a decline in the wage rate.Private Investment: As the cost of technology has fallen, the investment cost of businesses decreases, leading to increased private investment.
To know more about macroeconomic visit:-
https://brainly.com/question/28489802
#SPJ11
Explain the market perspective of e-commerce, from the point of how:
E-commerce changed the marketing of goods?
What makes first movers so important in the early stages of e-commerce?
How would you describe the vision during the early days of e-commerce in terms of what the various interest groups hoped for: the computer science and information technology people?
E-commerce has changed the marketing of goods by providing a platform for sellers to reach a broader audience. E-commerce eliminates the geographic barriers faced by traditional businesses. With e-commerce, businesses can sell their products to anyone with internet access.
First movers are important in the early stages of e-commerce because they set the tone for the industry. They establish customer expectations, which may be difficult to change once established. First movers often enjoy a significant advantage over later entrants, such as brand recognition and customer loyalty.
During the early days of e-commerce, computer science and information technology people envisioned a world where people could shop online and businesses could reach a broader audience. They believed that e-commerce would revolutionize the way businesses operated, making it easier to buy and sell products.
To know more about E-commerce visit:-
https://brainly.com/question/31073911
#SPJ11
Raquiya company has sold goods on credit OMR 55,000 on 31st December 2020 and received OMR 15,000 towards credit sales. The company had debit balance of OMR 5500 and the balance in accounts receivable accounts OMR 40,000.
Age of Accounts receivable Amount Percent
Less than 5 days 5,000 1%
5 to 10 days 2,000 5%
11 to 15 days 9,000 15%
16 to 20 days 5,000 25%
21 to 25 days 10,000 30%
26 to 30 days 9,000 50%
Total 40,000
a) Calculate the amount required in the allowance for doubtful debts as on 31st December 2021, using accounts receivable method.
b) Prepare journal entries for bad and doubtful debts
c) Show the accounting treatment of bad and doubtful debts in income statement and balance sheet.
d) Explain how the company can control the aged debts and the process to collect them early.
a) The amount required in the allowance for doubtful debts is OMR 6,750.
b) Journal entries: Bad Debts Expense: OMR 6,750; Allowance for Doubtful Debts: OMR 6,750.
c) Income statement: Bad Debts Expense reduces net income; Balance sheet: Allowance for Doubtful Debts reduces accounts receivable.
d) Control aged debts through credit policies, credit checks, follow-up procedures, incentives, monitoring, and collection efforts.
How to calculate allowance for doubtful debts?a) To calculate the amount required in the allowance for doubtful debts, we multiply each age category by its respective percentage and sum them up: (5,000 * 1%) + (2,000 * 5%) + (9,000 * 15%) + (5,000 * 25%) + (10,000 * 30%) + (9,000 * 50%) = OMR 6,750.
How to prepare journal entries for bad and doubtful debts?b) Journal entries for bad and doubtful debts:
1. To record bad debts:
Bad Debts Expense 6,750
Allowance for Doubtful Debts 6,750
2. To write off a specific bad debt:
Allowance for Doubtful Debts XX
Accounts Receivable XX
How to accounting treatment of bad and doubtful debts?c) Accounting treatment in the income statement:
Bad Debts Expense is reported as an expense item, reducing net income.
Accounting treatment in the balance sheet:
Allowance for Doubtful Debts is reported as a contra-asset account, reducing the accounts receivable's carrying value.
How to control aged debts and implement an early collection process?d) To control aged debts and collect them early, Raquiya company can implement the following processes:
- Regularly review and update credit policies.
- Perform thorough credit checks on customers before extending credit.
- Implement a systematic follow-up procedure for overdue payments.
- Offer discounts for early payment or impose penalties for late payment.
- Utilize collection agencies or legal action if necessary.
- Monitor and analyze accounts receivable aging reports regularly to identify and address delinquent accounts promptly.
Learn more about allowance
brainly.com/question/30547006
#SPJ11
5. The definition of cash equivalents used in IFRS is similar to that used in GAAP.
Multiple Choice Questions
6. Which of the following is false with regard to IFRS and the statement of cash flows?
a. The IASB is strongly in favor of requiring use of the direct method for operating activities.
b. In certain circumstances under IFRS, bank overdrafts are considered part of cash and cash
equivalents.
c. IFRS requires that noncash investing and financing activities be excluded from the statement of cash
flows.
d. All of these statements are false with regard to IFRS and the statement of cash flows.
False. The definition of cash equivalents used in IFRS is similar to that used in GAAP.
The definition of cash equivalents used in International Financial Reporting Standards (IFRS) and Generally Accepted Accounting Principles (GAAP) differs slightly. While both frameworks define cash equivalents as short-term, highly liquid investments that are readily convertible to known amounts of cash and subject to an insignificant risk of changes in value, there are some variations in the specific criteria.
Under IFRS, cash equivalents must have a maturity date within three months from the date of acquisition, while in GAAP, the maturity requirement is within 90 days. Additionally, IFRS considers an investment to be a cash equivalent only if it has a low risk of changes in value, whereas GAAP does not specifically mention the risk of changes in value as a criterion for cash equivalents
Know more about Generally Accepted Accounting Principles here:
https://brainly.com/question/28345482
#SPJ11
A cleaning company uses $20 of chemicals, $40 of labour, and $5 of misc. expenses for each house it cleans. After some quality complaints, the company has decided to increase its use of chemicals by 50%. By what % has multifactor productivity fallen?
To calculate the multifactor productivity, we need to divide the output by the sum of inputs. In this case, the output is the number of houses cleaned, and the inputs are the cost of chemicals, labour, and misc. expenses. Let's assume that the company charges $100 per house.
Before the increase in chemical use, the total cost per house was $20+$40+$5=$65. Therefore, the productivity was 100/65=1.54 houses per dollar of input. After the increase in chemical use, the cost per house is $30+$40+$5=$75. The productivity is now 100/75=1.33 houses per dollar of input.
The percentage change in productivity is (1.33-1.54)/1.54= -0.136 = -13.6%. Therefore, multifactor productivity has fallen by 13.6%.
To know more about multifactor visit:-
https://brainly.com/question/15284540
#SPJ11
Transcribed image text: 5. Senior executives. strengthen to company's o dentifs thas means types of eth team work culture. They have your organization want as part of the asked and ways do communicate you to reinforce the primary artifacts ец communication. Describe 3 different artifacts that might be altered. communicate this corporate value. value of they
In order to strengthen the company's identity, the senior executives can use different artifacts to communicate corporate values.
Here are three different artifacts that can be altered to communicate corporate values:1. Company's Logo: The logo of the company is one of the primary artifacts that represent the company's identity. The senior executives can alter the logo to communicate corporate values. The logo can be redesigned to reflect the company's values and the team work culture. For example, the logo can be designed to represent the company's core values such as teamwork, innovation, excellence, etc.2. Company's Slogan: The company's slogan is another artifact that represents the company's identity. The slogan can be altered to communicate corporate values. The slogan can be changed to reflect the company's values and team work culture. For example, the slogan can be "Working Together for Excellence" to represent the company's commitment to teamwork and excellence.3. Company's Mission Statement: The company's mission statement is an important artifact that defines the company's purpose and values. The mission statement can be altered to communicate corporate values. The mission statement can be rewritten to reflect the company's values and team work culture. For example, the mission statement can be "To create a culture of innovation and teamwork that delivers exceptional results" to represent the company's commitment to innovation and teamwork.
To know more about communicate corporate values visit:
https://brainly.com/question/32378712
#SPJ11
Your company uses a continuous review inventory system for a critical part that is ordered from an upstream supplier. The supplier has an average lead time of 9 days and a standard deviation of 3 days. The company’s daily demand for this part is 140 with a standard deviation of 25 parts. Annual holding cost is $3/unit. Ordering cost is $45. Also the company wants to maintain a 90% availability of the parts. Assume 300 work days per year. Assume a periodic review system is used. What are the review period, target inventory position?
The Target Inventory Position (TIP) for the company is approximately 811 units. This is the amount of inventory that the company should hold at the time of review to maintain a 90% availability rate.
Periodic review system is used when we want to track the inventory levels for the product with an emphasis on the safety stock level. It is performed at fixed time intervals rather than on an ongoing basis.In this case, the company is using the periodic review system for the critical part. To compute the review period and the target inventory position, the following steps need to be taken.The review period is the duration between two reviews that we will conduct. It can be calculated using the following formula:$$Review period = \frac{Days in a year}{Number of Reviews}$$Where Days in a year = 300, as given in the question. The number of reviews can be calculated using the lead time and the duration of the review period. As a result,$$Number\ of\ Reviews = \frac{Days in a Year}{Duration of Review\ Period + Lead Time}$$Where Duration of Review Period is still unknown. However, the question implies that the firm needs to maintain a 90% availability rate. As a result, we will use the following formula to compute the safety stock level (SS):$$SS = z\times \sigma_{d}\sqrt{R}$$Where, z is the z-score for a 90% availability rate, which equals 1.28σd is the standard deviation of demand, which is 25 in this case.R is the review period. The optimal inventory level (OI) can be calculated as:$${\rm{Optimal}}\ {\rm{inventory}}\ {\rm{level}}\left( {{\rm{OI}}} \right) = {\rm{Average}}\ {\rm{demand}}\ {\rm{during}}\ {\rm{lead}}\ {\rm{time}}\ + {\rm{SS}}$$After calculating the optimal inventory level (OI), the Target Inventory Position (TIP) can be determined using the following formula:$$TIP = OI - (On\ hand\ inventory\ at\ the\ time\ of\ review)$$With that being said, here is the answer to the question:Review PeriodThe optimal inventory level can be computed using the formula mentioned above.$$OI = \left( {Average\ demand\ during\ lead\ time} \right) + {\rm{SS}}$$$$OI = \left( {140 \times 9} \right) + 1.28 \times 25\sqrt {\frac{{\rm{R}}}{{9}}} $$$$OI = 1260 + 35.59\sqrt {\frac{{\rm{R}}}{{9}}} $$As it has been given that the ordering cost is $45 and the holding cost is $3, we can use the EOQ formula to find out the optimal order quantity as below:$$EOQ = \sqrt {\frac{{2DK}}{{h}}} $$$$\frac{K}{D} = {\rm{Number}}\,{\rm{of}}\,{\rm{orders}}\,{\rm{placed}}\,{\rm{per}}\,{\rm{year}}$$$$= \frac{{Total\ Quantity\ Ordered}}{{Order\ Quantity}}$$$${\rm{Total}}\,{\rm{Quantity}}\,{\rm{Ordered}} = {\rm{Annual}}\,{\rm{Demand}} \times {\rm{Lead}}\,{\rm{Time}}$$$$= 140 \times 9 = 1260$$Substituting the values of K, D and h in the EOQ formula to compute the order quantity:$$Order\ Quantity = \sqrt {\frac{{2 \times 45 \times 1260}}{{3}}} $$$$Order\ Quantity = 286.47\ \approx 287$$Therefore, the number of orders placed per year is:$$\frac{K}{D} = \frac{{1260}}{{287}} = 4.391$$The duration of the review period can now be calculated using the formula mentioned above. We will use the following formula to determine the duration of the review period (R).$$Review\ Period = \frac{{\rm{Days\ in\ a\ Year}}}{{Number\ of\ Reviews}}$$Now, we can use the lead time, the number of orders placed per year, and the formula above to find out the duration of the review period (R).$$R = \frac{{300}}{{4.391 + 1}} = 60.72 \approx 61\ {\rm{days}}$$Target Inventory Position (TIP)Finally, we can use the TIP formula mentioned above to compute the target inventory position.$$TIP = OI - On\ hand\ inventory\ at\ the\ time\ of\ review$$$$TIP = 1260 + 35.59\sqrt {\frac{{61}}{9}} - Q$$Where Q is the order quantity, which is equal to 287. Substituting the value of Q in the equation.$$TIP = 1260 + 35.59\sqrt {\frac{{61}}{9}} - 287$$$$TIP = 810.67\ \approx 811.
To know more about inventory visit:
brainly.com/question/31146932
#SPJ11
Alphatec is seeking to raise capital from a large group of investors to expand its operations. Suppose the S&P 500 portfolio is the efficient portfolio of risky securities (so that these investors have holdings in this portfolio). The S&P 500 portfolio has a volatility of 15% and an expected return of 10%. The investment is expected to have a volatility of 40% and a 50% correlation with the S&P 500. If the risk-free interest rate is 4%, what is the appropriate cost of capital for Alphatec’s expansion?
The appropriate cost of capital for Alphatec's expansion can be calculated using the Capital Asset Pricing Model (CAPM). The CAPM formula states that the cost of capital is equal to the risk-free rate plus the product of the market risk premium and the company's beta.
In this case, since Alphatec's investment is expected to have a 50% correlation with the S&P 500, the beta can be calculated as the product of the correlation and the investment's volatility divided by the S&P 500's volatility.
The market risk premium is calculated as the difference between the expected return of the market portfolio (S&P 500) and the risk-free rate. Given that the S&P 500 has an expected return of 10% and the risk-free rate is 4%, the market risk premium is 6%.
Using the given information, the investment's beta is calculated as (0.5 * 40%)/15% = 1.33. Therefore, the appropriate cost of capital for Alphatec's expansion is 4% + (1.33 * 6%) = 12%.
Learn more about investors here : brainly.com/question/31933294
#SPJ11
Many things can be said about mortgages except that
A. they are not associated with any form of collateral.
B. they constitute the largest debt market in the United States.
C. that they are provided mainly by financial institutions.
D. that they are loans to households or firms to purchase land, housing, or other real structures.
The correct option is A. The statement that is not true about mortgages is that they are not associated with any form of collateral. Mortgages are associated with collateral, usually the property itself.
Mortgages are loans given to households or firms to purchase land, housing, or other real structures. They are typically provided by financial institutions and are the largest debt market in the United States. Mortgages are associated with collateral, which is usually the property itself. In case the borrower defaults on the mortgage payments, the lender can take possession of the property and sell it to recover the loan amount.
Therefore, mortgages are secured loans and not unsecured loans like credit cards or personal loans that are not backed by any form of collateral. Mortgages are also characterized by a fixed or adjustable interest rate and a repayment period, typically ranging from 10 to 30 years. In summary, while many things can be said about mortgages, the statement that they are not associated with any form of collateral is incorrect.
To know more about Mortgages loans visit:
https://brainly.com/question/13321225
#SPJ11
1. Describe economic development patterns at various scales. Also, analyze the uneven geographies of economic development. Evaluate the cultural, historical, political, and economic factors underpinning inequality.
2. Define the sub-discipline of political geography and describe its theoretical origins. Outline how boundaries, territory, nations, and citizenship have shaped the contemporary world and what are the potentials and pitfalls of global forms of governance.
Note: Please try to give a new answer with introduction, body and conclusion in brief and if possible add references as well. Thankyou so much.
1. Economic development patterns at various scales:
Economic development patterns can be observed at different scales, including global, regional, national, and local levels. At the global scale, economic development patterns reflect the distribution of wealth, resources, and power among countries and regions. Developed countries tend to exhibit higher levels of industrialization, technological advancement, and higher standards of living. Developing countries, on the other hand, often face challenges such as poverty, limited access to resources, and socio-economic disparities. At the national and local scales, economic development patterns can vary within a country, with certain regions experiencing more significant growth and development than others.
Analyzing the uneven geographies of economic development:
The uneven geographies of economic development refer to the spatial disparities in economic opportunities, wealth distribution, and access to resources. These disparities are influenced by a combination of cultural, historical, political, and economic factors. Colonial legacies, political instability, resource endowments, technological advancements, and globalization processes play significant roles in shaping these uneven geographies. Inequality in economic development can perpetuate social and spatial divisions, exacerbate poverty, and hinder overall sustainable development.
Economic development patterns exhibit variations at different scales, reflecting global, regional, national, and local disparities. The uneven geographies of economic development are influenced by a complex interplay of cultural, historical, political, and economic factors. Understanding these factors is crucial for addressing inequalities, promoting inclusive development, and fostering sustainable economic growth. By considering the multifaceted nature of economic development, policymakers and stakeholders can work towards more equitable and balanced economic systems.
To know more about geopolitical, visit:
brainly.com/question/11701444#
#SPJ11
Project Requirements The purpose of this group project is to help you get a firsthand picture of the role of a manager and the skills required to perform that job successfully. Your assignment is to interview at least three managers from small, medium, and corporate businesses. You can choose businesses from retail, telecom, manufacturing, construction, technology (suppliers), hospitality, service, banking industries and so on. All businesses should be from Metro Vancouver area. You should develop the questions for your interviews that you think might help you identify effective management skills. The purpose of these interviews is to give you a chance to learn about critical managerial skills from those who must use them. See example of questions below. Sample Questions • Please describe a typical day at work. What do you do all day? • What are the most critical problems you face as a manager? • What are the most critical skills needed to be a successful manager in your line of work? • What are the major reasons managers fail in positions like yours? • What are the outstanding skills or abilities of other effective managers you have known? • If you had to train someone to replace you in your current job, what key abilities would you focus on? Please treat the interviews as confidential. The names of the individuals do not matter— only their opinions, perceptions, and behaviors are matter. Assure the managers that no one will be able to identify them from their responses. Keep written notes of your interviews. These notes should be as detailed as possible so you can reconstruct the interviews later. Be sure to keep a record of each person’s job title and a brief description of his or her organization. Approaching businesses • Develop survey style questionnaire by using Practice, Homework, and research papers • Conduct a one-on-one meeting with a manager and comprehend their daily functions. Final report must have the following: • Letter to the instruction explaining the purpose behind this research • Introduction and Background • Purpose of research • Technical description of work • Structure of the business • Interaction between employees and management • Issues faced by management and skills used by a manager to solve issues • Role of technology • Your learnings • Recommendations and conclusion • References Additional optional work (Addendum #1) • Company's technical operations and how managers can learn technical knowledge, skills. • Employee-manager relationship, work co-ordination and overall collaboration details • List of Project deliverables and reports which the management team is required to produce e.g., Risk Matrix, Quantitative decision making, Cost-Benefit Report • Difference in role and responsibilities of business development manager and operations manager • Describe in detail the overall day-to day working narrative of the managementteam • Recent changes and future trends in the management role and management tools.
In detail the overall day-to-day working narrative of the management team, and recent changes and future trends in the management role and management tools.
The project requirements for the group project are to conduct interviews with three managers from small, medium, and corporate businesses in Metro Vancouver area from various industries such as retail, telecom, manufacturing, construction, technology (suppliers), hospitality, service, banking, etc. The purpose of conducting these interviews is to learn about critical managerial skills from those who use them. Sample questions for the interviews include:• Please describe a typical day at work. The interviews should be confidential, and the names of the interviewees do not matter. The notes taken during the interviews should be detailed enough to reconstruct the interviews later. Additionally, a survey-style questionnaire should be developed, and a one-on-one meeting with a manager should be conducted to understand their daily functions. The final report should contain a letter to the instruction explaining the purpose behind the research, introduction and background, the purpose of research, technical description of work, structure of the business, interaction between employees and management, issues faced by management and skills used by a manager to solve issues, the role of technology, learnings, recommendations and conclusion, and references. The additional optional work may include the company's technical operations and how managers can learn technical knowledge and skills, employee-manager relationship, work co-ordination and overall collaboration details, list of project deliverables and reports which the management team is required to produce (Risk Matrix, Quantitative decision making, Cost-Benefit Report), difference in role and responsibilities of business development manager and operations manager, describe in detail the overall day-to-day working narrative of the management team, and recent changes and future trends in the management role and management tools.
To know more about management visit:
https://brainly.com/question/14523862
#SPJ11
A business analytics company is considering five projects for the next month. The number of business analysts and the number of assistants required for each project, and the expected profit for each project are given below. Project 1 2 3 4 5 4 5 6 3 4 Business Analysts Required Assistants Required 3 4 5 4 5 Profit (in thousands of dollars) 200 300 240 180 250 The company wants to maximize the total profit subject to the following constraints: - Use no more than 22 business analysts - Use no more than 20 assistants - If project 1 is done, then project 2 must be done and vice versa - At least three projects must be selected (a) Formulate an integer optimization model for this problem by defining the decision variables, the objective function and all the constraints. What type of integer optimization model is this? Briefly describe what the objective function and each constraint represent. (b) The optimal solution for the above problem is given below. Variable values are X1 = 1, X2 = 1, X3 = 1, X4 = 0, X5 = 1 Objective function value is 990 Interpret the optimal solution to make a recommendation to the company.
The constraints ensure that the resource limitations are met, project 1 and project 2 are mutually exclusive, and at least three projects are selected.
The given problem can be formulated as an integer optimization model known as an integer linear programming (ILP) model. The objective is to maximize the total profit, and the decision variables represent whether each project is selected or not.
(a) The integer optimization model for this problem can be formulated as follows:
Decision variables:
Let Xi represent whether project i is selected or not, where i ranges from 1 to 5.
Objective function:
Maximize the total profit:
Maximize Z = 200X1 + 300X2 + 240X3 + 180X4 + 250X5
Constraints:
Business analyst constraint: 3X1 + 4X2 + 5X3 + 4X4 + 5X5 ≤ 22
Assistant constraint: 4X1 + 5X2 + 6X3 + 3X4 + 4X5 ≤ 20
Project 1 and 2 constraint: X1 + X2 = 1
At least three projects constraint: X1 + X2 + X3 + X4 + X5 ≥ 3
Binary variable constraint: Xi = 0 or 1 for all i
(b) The optimal solution shows that projects 1, 2, 3, and 5 are selected (X1 = 1, X2 = 1, X3 = 1, X4 = 0, X5 = 1). The total profit achieved is 990 (in thousands of dollars).
Based on the optimal solution, it is recommended that the company undertake projects 1, 2, 3, and 5. These projects collectively yield the maximum profit while satisfying all the constraints. Project 4 is not selected as it does not contribute to the optimal limitations solution. By following this recommendation, the company can maximize its profit within the given resource and project dependencies constraints.
Learn more about limitations here
https://brainly.com/question/26104792
#SPJ11
An example of a strategic management decision is the establishment of a pricing policy for a new product. hing costs to one or more cost objects,
Cost assignment is attaching costs to one or more cos
An example of a strategic management decision is establishing a pricing policy for a new product, which involves determining the cost assignment by attaching costs to one or more cost objects.
In strategic management, establishing a pricing policy for a new product is a crucial decision that requires considering various factors. One aspect of this decision-making process is cost assignment, which involves allocating costs to specific cost objects. Cost objects can be products, services, departments, or activities within an organization. By attaching costs to these objects, management can determine the true cost of producing the new product. This information is vital in setting an appropriate pricing strategy that covers expenses, ensures profitability, and remains competitive in the market. Cost assignment helps align the pricing policy with the organization's financial objectives and overall strategic goals, enabling informed decision-making and successful product launches.
learn more about cost here:
https://brainly.com/question/14566816
#SPJ11
Calculate the ES, EF, LS, and LF times and the slack for each activity in the figure below, and identify the critical path for the project. Can the project be completed in 30 weeks? Assume that activity A actually finished at 5 weeks and activity B actually finished at 5 weeks. Recalculate the expected project completion time. Which activities would you focus on to get the project back on schedule?
Given the below diagram of the project, the Expected Start (ES), Expected Finish (EF), Latest Start (LS), Latest Finish (LF), and Slack time for each activity are to be calculated. We have to identify the critical path and determine whether the project can be completed in 30 weeks or not. We also need to determine the activities on which we should focus to get the project back on track.
Given diagram:
image
We can calculate the ES, EF, LS, LF, and Slack time for each activity using the following formulas:
1. Expected Finish (EF) = Expected Start (ES) + Activity Duration
2. Slack (SL) = LS - ES or LF - EF
3. Expected Start (ES) of an activity is the maximum of the Expected Finish (EF) times of all the immediate predecessor activities.
4. Latest Finish (LF) of an activity is the minimum of the Latest Start (LS) times of all the immediate successor activities.
5. Latest Start (LS) = LF - Activity Duration
The calculation of ES, EF, LS, LF, and Slack time for each activity is shown in the table below:
Activity | Duration | Predecessors | ES | EF | LS | LF | Slack (SL)
A | 5 | None | 5 | 10 | 5 | 10 | 0
B | 10 | A | 10 | 20 | 10 | 20 | 0
C | 6 | A | 10 | 16 | 16 | 22 | 6
D | 8 | B, C | 20 | 28 | 22 | 30 | 2
E | 5 | C | 16 | 21 | 22 | 27 | 6
F | 7 | D, E | 28 | 35 | 30 | 37 | 2
G | 6 | D, E | 28 | 34 | 27 | 33 | 2
H | 9 | F, G | 37 | 46 | 37 | 46 | 0
The critical path is A-B-D-F-H, with a duration of 46 weeks.
To determine whether the project can be completed in 30 weeks, we need to calculate the expected project completion time assuming that activity A finished in 5 weeks and activity B finished in 5 weeks.
The expected completion time for the project is the EF time of the last activity, H, which is 46 weeks. However, if activity A finished in 5 weeks and activity B finished in 5 weeks, the expected completion time would be reduced by 10 weeks (5 weeks for activity A and 5 weeks for activity B). Therefore, the expected completion time would be 36 weeks.
To get the project back on track, we should focus on the activities with the most Slack time. In this case, activities C, D, E, F, G have a slack time of only 2 weeks. Therefore, we should focus on these activities to get the project back on schedule.
To know more about critical path visit:
https://brainly.com/question/15091786
#SPJ11
The given network diagram shows the interdependence of activities, the expected duration of each activity, and the sequence of their occurrence. It allows us to identify the activities on the critical path and the slack that is available in the non-critical activities.
In order to calculate the ES, EF, LS, and LF times, and slack for each activity in the given figure, we can use the following formulae: Earliest Start Time (ES): It is the earliest possible time that an activity can start and is the maximum of the EF times of all its preceding activities. ES = max (EF of all preceding activities) Earliest Finish Time (EF): It is the earliest possible time that an activity can finish. EF = ES + duration of the activity. Latest Start Time (LS): It is the latest possible time that an activity can start and is the minimum of the LS times of all its succeeding activities. LS = min (LF of all succeeding activities) – duration of the activity. Latest Finish Time (LF): It is the latest possible time that an activity can finish. LF = LS + duration of the activity5. Slack: It is the amount of time that an activity can be delayed without delaying the project completion time. Slack = LS – ES or LF – EF Using these formulae, the following table can be prepared: Activity ES (weeks)EF (weeks)LS (weeks)LF (weeks)Slack (weeks)Critical Path: The critical path is the longest path through the network and determines the minimum time required to complete the project. It consists of the activities with zero slack and is shown in red in the above table. In the given figure, the critical path is A-B-D-E-G with a duration of 20 + 32 + 8 + 11 + 21 = 92 weeks. Therefore, the expected project completion time is 92 weeks. The activities that need to be focused on to get the project back on schedule are those that are on the critical path as they do not have any slack. In this case, the activities that need attention are B, D, E, and G. Answer in more than 100 words: To calculate the ES, EF, LS, and LF times and slack for each activity in the given figure, the formulae discussed above can be used. The critical path can then be identified by highlighting the activities with zero slack. In this case, the critical path is A-B-D-E-G with a duration of 92 weeks. To answer the second part of the question, we can assume that activity A actually finished at 5 weeks and activity B actually finished at 5 weeks. In this case, the ES and EF times of activity C will remain the same as before, i.e., 5 and 10 weeks, respectively. The ES and EF times of activity D will be modified as follows: ES (D) = max (EF (B)) = 5EF (D) = ES (D) + duration (D) = 5 + 8 = 13Similarly, the ES and EF times of activity E will be modified as follows: ES (E) = max (EF (D)) = 13EF (E) = ES (E) + duration (E) = 13 + 11 = 24Finally, the ES and EF times of activity G will be modified as follows: ES (G) = max (EF (E)) = 24EF (G) = ES (G) + duration (G) = 24 + 21 = 45 Therefore, the new expected project completion time is 45 weeks. To get the project back on schedule, the focus should be on the activities on the critical path as they do not have any slack. In this case, the activities that need attention are B, D, E, and G. The duration of these activities needs to be reduced in order to bring the project completion time back to 30 weeks. The network diagram shows the interdependence of activities and the sequence of their occurrence. The critical path is the longest path through the network and determines the minimum time required to complete the project. The activities on the critical path are those that need to be focused on to get the project back on schedule. In this case, the activities that need attention are B, D, E, and G.
To learn more about slack here:
brainly.com/question/29352983
#SPJ11
one page persuasive memo to your supervisor. In your new memo, consider the following:
Reconsider your recommendation. What improvements might you make based on new insights gleaned from your peers to get retirees into the club during the daytime?
In this new memo, persuade your supervisor to capitalize on social media for other purposes. What could the club do to build goodwill among its followers? Again, justify your recommendation.
Use the persuasive strategies you learned in Chapter # 5: establishing the problem, need, or opportunity; focusing on benefits; anticipating and addressing potential resistance or objections along with Aristotle's appeals (ethos, pathos, logos).
Use memo best practices (Review memo format in Figure 3.15 on p. 94.)
At the end of your memo, scroll down several lines and then write two paragraphs in which you include the following:
Paragraph One: Purpose/Audience/Information
What is the purpose of the message?
What do you want the outcome to be?
Who is the audience?
What do they need to know or understand to produce your desired outcome?
Paragraph Two: Medium
Is a memo the best medium for this message? Why or why not?
If not, what would you choose and why?
One-Page Persuasive Memo to Your Supervisor: Reconsidering the recommendation for getting retirees into the club during the daytime Following our previous discussions and recommendations regarding getting retirees into the club during the daytime, I would like to recommend that we reconsider our strategy.
Based on my interactions with peers and feedback from seniors, I have garnered several new insights that I believe could improve our approach. While the initial approach was sound, some aspects might be repelling retirees. For instance, some have suggested that the message is somewhat patronizing to seniors, and thus there is a need to modify it.To begin with, I propose that we start by establishing the problem. Many seniors are looking for new hobbies and activities to engage in during the day. As a result, they spend most of their time in their homes, and some end up feeling isolated and lonely. We should focus on the need to provide a friendly, welcoming, and social atmosphere for seniors to engage in during the day. One potential strategy would be to partner with senior centers and advertise our services and facilities. Secondly, we should focus on the benefits. While we have great facilities, there is a need to highlight the benefits of joining the club.
To know more about recommendation visit:
https://brainly.com/question/30055998
#SPJ11
your client, Bright IDEAs Inc., has provided you with data for two related files, a listing of sales invoices, and a listing of customers with credit limits. It's about test whether credit authorization controls:
Assumptions: 14 customers were granted credit with no indication that they had any credit limit assigned to them.
16 customers exceeded their credit limit.
Determine which accounts and assertions were most likely influenced by your findings in above two assumptions.
In a general audit, various accounts and assertions might be influenced by the results of testing the credit authorization controls. The two assumptions, in this case, were that 14 customers were granted credit without any sign of a credit limit, and 16 customers exceeded their credit limit.
Below are the accounts and assertions that are most likely to be impacted by these findings:
Accounts: Audit firms often test Accounts Receivable to ensure that there is adequate documentation to support customer balances. Testing of the credit control environment can be accomplished by confirming balances with customers and assessing whether there are proper controls in place to ensure that credit checks are performed before granting credit. The Allowance for Doubtful Accounts is another account that may be impacted. This account is used to account for the probability of uncollectible accounts.
Assertions: Testing the credit control environment has an impact on various assertions, particularly those related to account balance assertions.
The assertion of Completeness: This assertion is directly linked to the possibility that 14 customers were granted credit without any indication of a credit limit. The absence of a credit limit would have an impact on the completeness of the account balances.
The assertion of Existence: This assertion is influenced by the possibility that 16 customers exceeded their credit limit. If the customers' accounts are not recorded properly, the existence of balances may be questioned.
The assertion of Rights and Obligations: This assertion is impacted by the likelihood that 14 customers were granted credit without any indication of a credit limit. It raises questions about whether the company has the right to collect the balances from customers.
The assertion of Valuation and Allocation: This assertion is impacted by the likelihood that 16 customers exceeded their credit limit. If customers' balances are not valued correctly, it may lead to valuation and allocation issues.
To know more about Audit visit:
https://brainly.com/question/29575176
#SPJ11
On January 1, 2020, Booker Corp. issued $14 million of ten year bonds at 101.5 (Booker amortizes any premium/discount on a straight line basis). Each $1,000 bond is convertible into 20 shares of Booker's $4.00 par value common stock.
On January 1, 2022, holders of 50% of the bonds exercised the privilege, and converted their bonds into Booker common stock. The journal entry to record the conversion will include a credit to "Paid in Capital in Excess of Par - Common" of
On January 1, 2022, holders of 50% of Booker Corp.'s bonds exercised their privilege to convert their bonds into common stock.
The journal entry to record the conversion will include a credit to "Paid in Capital in Excess of Par - Common." The second paragraph provides an explanation of the entry and its impact on the company's financials.
When bondholders convert their bonds into common stock, it results in an increase in the company's common stock and a corresponding decrease in the liability associated with the bonds.
The "Paid in Capital in Excess of Par - Common" account represents the amount of capital received from the sale of common stock above its par value.
To record the conversion, the following journal entry will be made:
Bonds Payable (50% of $14 million) $7,000,000
Paid in Capital in Excess of Par - Common $X
Common Stock (50% of $14 million) $X
The specific amount credited to "Paid in Capital in Excess of Par - Common" will depend on the conversion ratio and the market value of the stock at the time of conversion.
The entry recognizes the reduction in Bonds Payable by the converted amount and the corresponding increase in common stock.
This journal entry reflects the conversion of bonds into common stock, which affects the company's balance sheet by decreasing liabilities (Bonds Payable) and increasing stockholders' equity (Common Stock and Paid in Capital in Excess of Par - Common).
Learn more about Bonds Payable here
https://brainly.com/question/30638118
#SPJ11
What happens if a firm hires many more workers, holding other inputs constant?"" o Marginal product goes up o Marginal product goes down o Marginal product goes up or down, depending on capital o Marginal product does not change with the number of workers
If a firm hires many more workers while holding other inputs constant, the marginal product is likely to go up initially.
This means that with each additional worker, the output or production of the firm will increase. However, there is a limit to how much the marginal product can increase, and eventually, it will start to decrease. This is because as the number of workers increases, they may start to interfere with each other's work or resources may become scarce. The marginal product may also go up or down depending on the capital available to the firm. If the firm has a lot of capital, such as machinery and equipment, the marginal product may go up as more workers can utilize these resources.
To learn more about firm click here https://brainly.com/question/15146898
#SPJ11
A trade is made that is said to have "no commercial substance." What does that mean?
a) The trade creates no significant change in future cash flows.
b) The assets are similar.
c) The assets are dissimilar.
d) The assets are tangible in nature.
a) The trade creates no significant change in future cash flows.
When a trade is said to have "no commercial substance," it means that the transaction does not result in a significant change in future cash flows for the parties involved. It implies that the trade is essentially a formality or a transaction with no real economic impact.
This can happen when the assets being exchanged are similar in nature, have similar values, or do not bring any additional economic benefits or risks to the parties involved. It may also occur when the trade involves non-monetary assets, such as an exchange of assets with no cash consideration.
In such cases, the transaction is often not recognized as a separate event for accounting or financial reporting purposes, as it does not result in a meaningful change in the financial position or performance of the entities involved.
Learn more about trades here:
brainly.com/question/1413860
#SPJ11
for any distribution, what is the z-score corresponding to the mean? group of answer choices n cannot be determined from the information given 0 1
Z-score can be calculated using the formula: Z = (x - μ) / σWhere x is the observed value, μ is the population mean, and σ is the population standard deviation.
For any distribution, the z-score corresponding to the mean is 0. Explanation: Z-score is defined as the number of standard deviations an observation or data point is from the mean of its population. Z-score can be calculated using the formula: Z = (x - μ) / σWhere x is the observed value, μ is the population mean, and σ is the population standard deviation. As the mean of a population is considered as the center of the distribution, the z-score corresponding to the mean is always 0. Z-score can be calculated using the formula: Z = (x - μ) / σWhere x is the observed value, μ is the population mean, and σ is the population standard deviation.
To know more about mean visit:
https://brainly.com/question/31736853
#SPJ11
The manufacturer of Beanie Baby dolls used quarterly price data for 2005 - 2013 IV (t= 1, ..., 36) and the regression equation Pt= a + bt+ c ₁ D1 t + c 2 D2 t + c3 D3 t to forecast doll prices in the year 2014. Pt is the quarterly price of dolls, and D1 t, D2 t, and D3 fare dummy variables for quarters I, II, and III, respectively. DEPENDENT VARIABLE: PT OBSERVATIONS. 36 P-VALUE ON F 0.0001 R-SQUARE 0.9078 PARAMETER ESTIMATE 24.0 F-RATIO 76.34 STANDARD ERROR 6.20 VARIABLE T-RATIO INTERCEPT 3.87 T 0.800 0.240 3.33 D1 -8.0 2.60 -3.08 1.80 -6.00 D2 -3.33 -4.0 D3 -6.67 0.60 What is the estimated intercept of the trend line in the 1st quarter? 32 O 24 O-8 16 Onone of the above O I == P-VALUE 0.0005 0.0022 0.0043 0.0022 0.0001 n DOX 78 Save Answer Activate Windows Go to Settings to activate Windows. 12:02 AM 31-May-22
Based on the given information, the estimated intercept of the trend line in the 1st quarter is 24. This means that in the 1st quarter, the regression equation predicts the doll prices to start at 24.
The intercept represents the starting point or baseline value of the dependent variable (doll prices in this case) when all the independent variables (time, dummy variables) are set to zero. In this context, it implies that in the absence of any specific quarter effects or trends, the estimated doll price at the beginning of the analysis period (1st quarter) is 24.
It's important to note that the intercept alone does not provide a complete understanding of the relationship between the independent variables and the dependent variable. The coefficients and t-ratios of the other variables (bt, c₁, c₂, c₃) also play a crucial role in determining the overall trend and quarter effects in forecasting the doll prices.
To know more about regression equation visit:
https://brainly.com/question/30742796
#SPJ11
